Search results for "refrigerator control board"

Genuine OEM W11844302 Refrigerator Filter Head The W11844302 is a genuine OEM water filter head assembly for Whirlpool refrigerators, and the current part number that supersedes the earlier W11808483. The filter head is the fitting inside the refrigerator that holds the water filter and routes incoming water through it to the water dispenser and ice maker. When the head cracks, leaks, or no longer seats the filter correctly, you can see water at the filter, lose flow to the dispenser or ice maker, or find the filter will not lock in or seal. This is a genuine OEM part from Whirlpool, not an aftermarket equivalent, so the fit and the filter connection match what came with the refrigerator. It is the filter head only. The water filter itself is a separate part and is sold separately. Quick Answer The Genuine OEM W11844302 Filter Head fixes a Whirlpool refrigerator whose filter head is cracked, leaking, or no longer holding or sealing the water filter. Genuine OEM, the current number superseding W11808483 and a long list of earlier Whirlpool filter head numbers. Classic symptom: water dripping around the filter, a filter that won't lock in or seal, or reduced water flow to the dispenser and ice maker. Common Problems This Part Fixes Water leaking from or around the filter head Water filter won't lock in or seal properly Reduced or no water from the dispenser or ice maker traced to the filter head Cracked, broken, or damaged filter head housing Worn filter connection that no longer holds the filter securely Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This filter head replaces the following part numbers: W11844302, W11346623, W11808483, 12590620, 12590621, 12590622, W10605367, W10861009, WPW10605367, 12590618, W10609243, W11308018, W11791385, AP8114280, AWP1598415. W11844302 is the newest number for this filter head, superseding W11808483. The rest are earlier Whirlpool numbers for it. The source list continues beyond those shown, so additional numbers may exist. If your old filter head or parts diagram shows any of them, match against this list. Compatibility This filter head is listed for: Whirlpool refrigerators, including WRF535SWHZ Note: Filter heads differ between refrigerator models and generations, and no full model list is published for this part. Before ordering, compare your old filter head and its mounting against the Replaces list and your parts diagram, or contact our support team with your model number and we'll verify fit. This is the filter head only. The water filter is sold separately. Key Features Genuine OEM Whirlpool water filter head assembly, not an aftermarket equivalent Current part number, superseding W11808483 and a long list of earlier Whirlpool filter head numbers Restores a secure, leak-free filter connection Filter head only. Water filter sold separately Product Specifications Part Number W11844302 OEM Part Number W11844302 Supersedes W11808483 Part Type Refrigerator Water Filter Head Assembly Condition Genuine OEM Manufacturer Whirlpool Included Filter Head Only Application Select Whirlpool Refrigerators Installation Notes ⚠️ Shut Off Water and Unplug Power Turn off the water supply to the refrigerator and unplug it before starting. Remove the water filter, and have towels ready since some water will remain in the lines. Following your model's service guide, disconnect the water lines from the filter head and remove the screws or fasteners holding it to the refrigerator. Note how the lines and mounting are arranged, install the new filter head in the same position, and reconnect the lines securely. Install the water filter, restore water and power, and check every connection for leaks. Run water through the dispenser for several minutes to flush air from the lines, and check again for leaks. Frequently Asked Questions My water filter leaks or won't seal. Is this the part I need? It can be. Check first that the filter is the correct one for your model and is fully seated. If the filter fits correctly but still leaks, or the head itself is cracked or damaged, replacing the filter head should fix it. Does this include the water filter? No. This is the filter head only. The water filter is sold separately. My old filter head is marked W11808483, W10861009, or W11346623. Will this work? All three numbers are on the Replaces list. Because filter heads vary between models, compare your old head and its mounting against this one, or contact our support team with your model number and we'll confirm before you order. Is this a genuine Whirlpool part? Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

MJX41869202 Refrigerator Genuine LG Water Inlet Valve Genuine LG refrigerator water inlet valve designed to control water flow to the ice maker and water dispenser. ✓ Genuine LG Part ✓ Replaces MJX41869202 ✓ Compatibility Support Product Description The MJX41869202 Refrigerator Genuine LG Water Inlet Valve controls the flow of water into compatible LG refrigerators. This valve supplies water to the ice maker and water dispenser when called by the appliance. Replacing a faulty refrigerator water valve can help fix water supply issues, leaking, no ice production, or dispenser flow problems. Quick Answer If your refrigerator is not making ice, the water dispenser is not working, or water is leaking near the valve area, the MJX41869202 water inlet valve may need replacement. ⚠️ Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. Common Problems This Part Fixes Refrigerator not making ice Water dispenser not working Slow or no water flow Water leaking from valve area Faulty refrigerator water inlet valve Replaces part Number MJX41869202, 2646397, 5221JB2010J, 5221JB2010L, 5221JB2010Q, MJX41869209, EAP6448332, ALG1106453, AP5666281, PD00005216, PS6448332. Compatibility This genuine LG part fits select LG, Kenmore, and compatible refrigerator models using part number MJX41869202. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. Key Features Genuine LG refrigerator water inlet valve Controls water flow to dispenser and ice maker Helps restore proper water supply Designed for compatible refrigerator models Reliable OEM replacement component Product Specifications Brand LG Part Type Refrigerator Water Inlet Valve Primary Part Number MJX41869202 Compatible Appliance Type Refrigerator Condition Genuine New Installation Disconnect power and shut off the water supply before installation. Inspect water lines, fittings, and connections for leaks after installation. Troubleshooting Guide ⚠️ Disconnect power and shut off water supply before servicing the refrigerator. Check the water supply line for kinks or restrictions. Inspect the valve area for leaks or damaged fittings. Verify the refrigerator water filter is not clogged. Replace the water inlet valve if water flow problems continue. When Should You Replace This Part? Replace the refrigerator water inlet valve if the ice maker is not filling, the water dispenser has weak or no flow, or water is leaking from the valve area. Shop With Confidence We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. ✓ Fast Shipping ✓ Genuine Parts ✓ Compatibility Support ✓ Secure Checkout ```

Read more less

OE WR60X10220 Refrigerator Condenser Fan Motor The OE WR60X10220 is an Original Equipment condenser fan motor for GE-built refrigerators, sourced from the same original manufacturer that supplies this motor for genuine GE production, and shipped in XPARTCO packaging rather than GE retail packaging. The condenser fan motor pulls air across the condenser coils and compressor to dissipate heat, and on many models it also helps evaporate condensate that collects in the drain pan below the compressor. When this motor fails or weakens, the compressor and coils can't shed heat properly, leading to a refrigerator that runs constantly, doesn't cool adequately, or develops a squealing/screeching noise as the motor bearings wear. It directly replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Located in the rear compressor compartment behind the refrigerator's rear access panel. Installs in 30–60 minutes with basic hand tools. Quick Answer The OE WR60X10220 Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, and Kenmore (GE-built) refrigerators that run constantly, don't cool adequately, or make a squealing/screeching noise from the compressor compartment. This is an Original Equipment motor — same manufacturer as genuine GE production, packaged as XPARTCO rather than GE retail packaging. 115V. Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Classic symptom: loud squealing or screeching noise coming from behind the fridge. Common Problems This Part Fixes Refrigerator runs constantly and doesn't cycle off normally Fridge or freezer not cooling adequately or running warm Loud squealing, screeching, or grinding noise from the rear compressor compartment Compressor overheating or shutting off on thermal protection Water pooling under the refrigerator from an overwhelmed drain pan Condenser fan blade not spinning, or spinning slowly/intermittently What Is an OE Part? OE ("Original Equipment") parts are sourced from the same original manufacturer that supplies the component for genuine factory production — not a different aftermarket maker. The difference from a "Genuine OEM" listing is packaging: an OE part ships in XPARTCO packaging instead of the appliance brand's retail box, at a lower cost, while the part itself comes off the same production line. OE is a separate designation from our XPARTCO aftermarket brand and is never labeled with an XPARTCO prefix. Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This condenser fan motor directly replaces the following OEM and cross-reference part numbers: WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This condenser fan motor is compatible with a wide range of GE-built refrigerators from the following brands: GE refrigerators (including GSL22JFPDBS-BS, GSS25WGPHBB, GSL25JFPHBS, and related side-by-side and bottom-freezer models) Hotpoint refrigerators (GE-built models, including HSM25GFRFSA) RCA refrigerators (GE-built models) Kenmore refrigerators (select GE-built models) Note: This motor is used across a large number of GE-platform refrigerator models. Always verify your appliance model number before ordering, since evaporator fan motors and condenser fan motors are different components that are easy to confuse — an evaporator fan sits inside the freezer compartment, while this condenser fan sits in the rear compressor compartment. Key Features Original Equipment condenser fan motor — same manufacturer source as genuine GE production Resolves "runs constantly," "not cooling," and "squealing noise" symptoms caused by motor failure Pulls air across the condenser coils and compressor to dissipate heat Helps evaporate excess condensate collecting in the drain pan on many models 115V rated motor matching original electrical specifications Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220 Compatible with GE, Hotpoint, RCA, and Kenmore refrigerators Same production source as the genuine part, in XPARTCO packaging at a lower cost Product Specifications Part Number WR60X10220-OE OEM Part Number WR60X10220 Part Type Refrigerator Condenser Fan Motor Condition Original Equipment (OE) — XPARTCO Packaging Voltage 115V Location Rear Compressor Compartment Function Cools condenser coils/compressor; assists drain pan evaporation Compatible Brands GE, Hotpoint, RCA, Kenmore Installation Notes ⚠️ Unplug Refrigerator Before Starting Disconnect power before beginning. Pull the refrigerator away from the wall and remove the rear access panel over the compressor compartment (typically several screws around the perimeter). Locate the condenser fan motor and blade near the compressor. Photograph the wiring before disconnecting. Unplug the motor's wiring harness connector. Remove the mounting screws or bracket clip holding the motor in place, and note the orientation of the fan blade on the motor shaft before removing it — the blade must be reinstalled facing the same direction to move air correctly. Transfer the fan blade to the new WR60X10220 motor, or install the blade included with your kit in the same orientation. Mount the new motor in the same position and secure it. Reconnect the wiring harness, matching your photos. Reinstall the rear access panel, restore power, and confirm the fan spins freely and the compressor area cools down normally after running. Tools needed: nut driver or screwdriver, needle-nose pliers (for wiring connectors). Frequently Asked Questions What's the difference between this OE part and a "Genuine OEM" listing? Both come from the same original manufacturer as factory production — the difference is packaging and price. A Genuine OEM listing ships in the appliance brand's own retail box; this OE part ships in XPARTCO packaging at a lower cost, with no difference in the motor itself. My fridge is making a loud squealing noise — is this the part I need? Very likely, yes. A squealing or screeching noise from behind the refrigerator, especially one that gets louder over time, is one of the most common symptoms of a failing condenser fan motor as its bearings wear out. Pull the unit out and listen near the rear compressor compartment to confirm the noise is coming from that area before ordering. Is this the same as an evaporator fan motor? No — these are different components serving different purposes, and it's easy to order the wrong one. The evaporator fan motor is inside the freezer compartment and circulates cold air through the fridge and freezer. This condenser fan motor is in the rear compressor compartment and cools the compressor and condenser coils. Confirm which one your model uses based on symptoms and location before ordering. Do I need to transfer the fan blade from my old motor? On many models, yes — the fan blade is a separate component that mounts onto the motor shaft, and you'll transfer it from the old motor to the new one, noting its orientation first. Some kits include a new blade; check what's included with your specific motor before starting the repair. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Original Equipment Source ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WR57X33326 Refrigerator OE Water Valve – Compatible with GE, Hotpoint, and Crosley Refrigerators Product Description Restore proper water and ice dispensing with the XPARTCO WR57X33326 Refrigerator OE Water Valve. This high-quality OE (Original Equipment) replacement regulates water flow from your home supply to the ice maker and dispenser. A worn or leaking valve can cause reduced ice production, no water dispensing, or unwanted drips. This OE-grade part delivers the same performance, fit, and reliability as the factory original — at a better value. What is OE ?: “OE (Original Equipment) parts are manufactured to meet the same specifications, materials, and performance standards as the original factory-installed components. XPARTCO parts are engineered to provide equivalent fit and function to OEM components while offering reliable quality at a competitive price.” Replaces Part Numbers WR57X33326, WR57X10032, WR32X10032, WR57X10040, WR57X10064, PD00063637, AP6995571, PS16226572, WR57X10051, WR57X10012, 1032629, IMV-513, IMV513, WR02X10105, WR2X10105, WR57X0092, WR57X0098, WR57X0099, WR57X0104, WR57X0111, WR57X0119, WR57X10010, WR57X10018, WR57X10018E, WR57X10051-25PK, WR57X104, WR57X111, WR57X119, WR57X92, WR57X98, WR57X99, AH901314, EA901314,  AP3672839, PS901314. Compatibility This OE water valve is compatible with select GE, Hotpoint, and Crosley refrigerators. Example compatible models include (but are not limited to): GE GSS25GSHRCSS, GE GFE29HSDASS, and Hotpoint HSS25IFMDWW. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 OE Replacement – Matches the performance and fit of the original factory part 💧 Consistent Water Flow – Controls water supply to the dispenser and ice maker 💰 Reliable Value – OE quality at a lower cost than OEM retail pricing 🛠️ DIY Installation – Installs easily with standard household tools 🛡️ Fixes Common Issues – Resolves leaks, no-ice, or water-dispensing failures 📐 Product Specification Part Number: WR57X33326 Component Type: Refrigerator Water Inlet Valve Material: Reinforced plastic with dual solenoid control Mounting: Direct-fit replacement located on rear refrigerator panel Operating Conditions: Designed for standard household water pressure Compliance: OE (Original Equipment) quality – same form, fit, and function as OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver, adjustable wrench, pliers ⚠️ Safety First: Unplug refrigerator and turn off water supply before beginning repairs. Steps: Disconnect refrigerator from power and shut off water supply. Remove rear access panel to expose the valve assembly. Detach inlet tubing and wiring connectors from the old valve. Unscrew and remove the defective valve. Mount the new XPARTCO WR57X33326 valve in place, reconnect wiring and hoses. Reinstall the access panel, turn on water and power, then test dispenser and ice maker. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Bring your refrigerator’s water system back to life — Add to Cart Now for an OE-quality replacement built to last!

Read more less

WR60X10209 (OE) Refrigerator Condenser Fan Motor The WR60X10209 is an OE (Original Equipment) DC condenser fan motor for GE refrigerators. This motor lives in the compressor/machine compartment at the back or bottom of the refrigerator. Whenever the compressor runs, this fan runs right along with it, circulating air across the condenser coils to help dissipate heat from the hot refrigerant before it moves on to the evaporator, keeping the compressor from overheating and the whole system running efficiently. Rated 11.3V DC, 2.2W, with a 4-pin plastic plug carrying 4 wires (white, blue, red, and yellow). The motor shaft measures 1/8" in diameter and 2-7/8" long. Common failure causes include worn motor bearings, dirty or obstructed condenser coils forcing the motor to work harder than intended, and general electrical wear. Symptoms include increased noise when the freezer door is opened, warm temperatures inside the refrigerator, and — left unaddressed — compressor overheating and food spoilage from a refrigerator that can no longer maintain temperature. It directly replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, and PS1483567. Quick Answer The WR60X10209 (OE) Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, and select Kenmore refrigerators with increased noise near the compressor compartment, warm temperatures inside the fridge, or early signs of compressor overheating. 11.3V DC, 2.2W, 4-pin/4-wire plug, 1/8" x 2-7/8" shaft. Replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, PS1483567. This is the 12V DC condenser fan — if your refrigerator needs a 120V motor, see our WR60X10220 listing instead. Common Problems This Part Fixes Increased noise near the compressor compartment or when the freezer door is opened Warm temperatures inside the refrigerator Refrigerator running constantly as it struggles to maintain temperature Compressor overheating from restricted airflow around the condenser coils Food spoilage from a refrigerator that can't hold a consistent temperature Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand What Is an OE Part? OE (Original Equipment) means this part is manufactured by the same original supplier that produces the Genuine OEM version — identical fit, materials, and performance. The only difference is packaging: OE parts ship under our XPARTCO brand rather than the appliance manufacturer's branded box, which is why they can't be listed as Genuine OEM. You get factory-original quality at a more affordable price. Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers: WR60X10209, 1195784, WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, 045900390950, 197D2407P013, AGE29194, AH1483567, EA1483567, EAP1483567, AP4265957, PD00001176, PS1483567. The motor's own sticker also references production number 197D2407P013. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This condenser fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select RCA and Kenmore refrigerators built on the GE platform. Note — 12V DC, not 120V: This is the 12V DC condenser fan motor. If your refrigerator calls for a 120V motor instead, you need our WR60X10220 listing. This is also a condenser fan (cools the compressor and condenser coils), not an evaporator fan (circulates cold air to the food compartments) — a different part from our WR60X10074, WR60X10185, and WR60X10318 evaporator fan motor listings. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs. Key Features OE (Original Equipment) condenser fan motor — draws air across the condenser coils to cool the refrigerant and compressor Resolves "noise near the compressor," "warm fridge temperatures," and "compressor overheating" symptoms caused by fan failure Rated 11.3V DC, 2.2W 4-pin plastic plug with 4 wires (white, blue, red, yellow) 1/8" diameter x 2-7/8" long shaft Direct drop-in replacement matching the original mounting and blade fitment Replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, and PS1483567 Compatible with GE, Hotpoint, RCA, and select Kenmore refrigerators Product Specifications Part Number WR60X10209 Designation OE (Original Equipment) Part Type Refrigerator DC Condenser Fan Motor Brand GE Location Compressor/machine compartment (back or bottom of cabinet) Function Cools the condenser coils and compressor Voltage 11.3V DC Wattage 2.2 W Connector 4-pin plastic plug, 4-wire (white, blue, red, yellow) Shaft 1/8" diameter x 2-7/8" long Quantity 1 fan motor Compatible Brands GE, Hotpoint, RCA, Kenmore Installation Notes ⚠️ Danger — Authorized Service Part Required For Flammable Refrigerant Systems GE's own service guidance carries an explicit warning for this component: it is a manufacturer-authorized service part intended for use in refrigerator models that use a flammable refrigerant, such as R600a. Using an unauthorized or incorrectly rated service part in a unit that uses a flammable refrigerant could lead to a risk of fire or explosion. Before ordering or installing, confirm your refrigerator's refrigerant type and verify this part is correct for your specific model. If you have any doubt about your refrigerant type or the correct part for your unit, contact our support team with your model number before proceeding, or have a qualified appliance technician perform this repair. ⚠️ Unplug Refrigerator Before Starting Shut off power at the circuit breaker or fuse box, then pull the refrigerator away from the wall and disconnect the power cord from the outlet. Wear work gloves. Remove the condenser fan motor cover, typically held on by two screws, to access the motor. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces symptoms similar to a failing motor and costs nothing to rule out. Photograph the wiring and the fan blade's position before disconnecting anything. Disconnect the 4-pin plug from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Mount the new WR60X10209 in the same position, reconnect the 4-pin plug fully, and confirm the blade spins freely by hand without contacting the housing before reinstalling the fan cover. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions Why is there a fire/explosion warning on this part? Some refrigerators use a flammable refrigerant, such as R600a (isobutane), instead of older non-flammable refrigerants. Electrical components like fan motors sit near refrigerant lines and can be a source of ignition if a leak were ever present, which is why GE specifically requires an authorized, correctly rated service part for these systems rather than a generic substitute. This isn't a concern unique to this listing — it reflects GE's general guidance for electrical components used in flammable-refrigerant refrigerators, and confirming your model and refrigerant type before ordering is the appropriate precaution. My refrigerator is noisy and runs warm. Is this the condenser fan? It's a strong possibility, especially if the noise seems to come from the back or bottom of the unit and you notice both symptoms together. Without proper airflow across the condenser coils, heat builds up in the machine compartment, which reduces the whole refrigeration cycle's efficiency and shows up as warmer-than-normal temperatures throughout the fridge. Could dirty condenser coils cause the same symptoms as a bad fan motor? Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix. Is this a genuine OEM part? This is an OE (Original Equipment) part sold under our XPARTCO brand. OE parts are manufactured by the same original supplier that produces the Genuine OEM part, so the fit, materials, and performance are identical — the difference is that OE parts ship in XPARTCO packaging rather than the appliance manufacturer's branded box, which is why we can't list them as Genuine OEM. This gives you factory-original quality at a more affordable price than the branded version. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WPW10481149 Dishwasher Touchpad and Control Panel Fits Specific KitchenAid Dishwasher Models Color: White   Replaces Part Numbers: WPW10481149, W10356933, W10481149, AP6022134, PS11755463.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WR30X39470 Refrigerator Genuine Ice Maker Fits specific GE refrigerator models. Replaces Part Numbers: WR30X39470, AP7192967, OEM28771870, PS16729732. Description: This Refrigerator Ice Maker Assembly is essential for restoring your refrigerator's ice production capabilities. This Genuine OEM part ensures seamless compatibility with a wide range of GE refrigerator models, providing reliable and consistent ice making. Crafted with high-quality materials, the Ice Maker Assembly delivers efficient performance, helping you maintain a steady supply of ice for your daily needs. Its sturdy design ensures long-lasting durability, reducing the need for frequent replacements. Installing this part is straightforward, allowing you to quickly get your refrigerator back to full functionality without hassle. Whether your original ice maker is malfunctioning, leaking, or has worn out over time, the Refrigerator Ice Maker Assembly offers a perfect replacement solution.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO WR55X11132 Refrigerator LED Light Product Overview The XPARTCO WR55X11132 Refrigerator LED Light provides bright, energy-efficient illumination inside your refrigerator, improving visibility and enhancing overall appliance functionality. This high-quality LED module restores clear lighting for easy food access. Note: This is LED Light only, Cover is not included. Quick Answer If your refrigerator light is dim, flickering, or not turning on, the WR55X11132 LED light module may be faulty. Replacing it restores proper interior lighting and visibility. Replaces Part Numbers Replaces OEM part number: WR55X11132, EAP4704284, AGE28811, PD00030062, AP5646375, 3033142, PS4704284. Compatibility This refrigerator LED light is compatible with select GE, Hotpoint, and GE Profile refrigerators. . GE Refrigerators: GFE26GGHBBB, GFE26GGHBWW, GFE26GGHCBB, GFE26GGHCWW, GFE26GGHDBB, GFE26GGHDWW, GFE26GGHEBB, GFE26GGHEWW, GFE26GGHFBB, GFE26GGHFWW, GFE26GGHGBB, GFE26GGHGWW, GFE26GGKBBB, GFE26GGKBWW, GFE26GMHBES, GFE26GMHCES, GFE26GMHDES, GFE26GMHEES, GFE26GMHGES, GFE26GMKBES, GFE26GSHBSS, GFE26GSHCSS. Always verify your appliance model number before ordering. Common Problems This Part Fixes Refrigerator light not working Dim or flickering LED light Poor visibility inside fridge Key Features Bright LED illumination Energy-efficient lighting Long-lasting performance High-quality aftermarket replacement Product Specifications Part Number: XPWR55X11132 Part Type: Refrigerator LED Light Module Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Application: Refrigerator Interior Lighting Troubleshooting Guide No interior light → Failed LED module Flickering light → Failing LED board Dim lighting → Aging LED unit When Should You Replace This Light? Replace this LED light if your refrigerator interior lighting is not functioning properly or has become dim or inconsistent. Installation Notes ⚠️ Disconnect power before installation. Remove the light cover, disconnect the module, and install the new LED light securely. Related Parts Refrigerator Door Switch Control Board Light Cover Frequently Asked Questions Will this light fit my refrigerator?This LED module fits many GE and compatible models. Always verify your model number. Is this LED or bulb type?This is an LED light module, not a traditional bulb. What are signs of a bad LED module?No light, flickering, or dim lighting indicate replacement is needed. Is installation difficult?Most modules are easy to replace, but follow your appliance manual for best results. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less

Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor - Compatible with GE, Hotpoint, RCA, Kenmore Product Description Restore efficient cooling with the Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor. This OEM evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, delivering reliable performance as an authentic GE part. Note: Includes one evaporator fan motor with 6-pin harness and thermistor. Disconnect power before installation. Check evaporator fan blade and related components (e.g., thermistor) for optimal performance. Replaces part numbers: WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950. Compatibility: Compatible with models including but not limited to: GE: 39631UGTAWW, 39631UGXAWW, 39639USTAGV, GSS25SGMDBS, GSS25WGMDBB, GSS25WGMDBB, HSS25GFPAWW, PSS26SGPASS Hotpoint: HSS25IFMDWW, HSS25IFMCCC RCA: RSG20IDMBFWW Kenmore: 363.58541890, 363.58542890 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and Kenmore refrigerators. ❄️ Specifications: OEM evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor. 💪 Reliable Performance: Authentic GE part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes. 🛡️ Effective Fixes: Resolves noisy operation, inconsistent temperatures, frost buildup, or refrigerator running continuously. Product Specification Part Number: Genuine GE WR60X10307 Component Type: Refrigerator evaporator fan motor Material: Plastic housing, metal motor components Electrical Specs: 9.75V DC, 3.25W Mounting: Screw-mounted in freezer compartment behind evaporator cover Operating Conditions: Suitable for low-temperature refrigerator environments Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today! Add to cart now for a reliable fix!

Read more less

ERP 6750CL0001D Refrigerator Compressor Overload Protector Fits Specific LG, Kenmore Refrigerator Models. This Compressor Overload is an essential replacement part designed specifically for Specific Kenmore brand refrigerators. Compatible with a wide range of LG models, this overload ensures optimal cooling performance and extends the lifespan of your refrigerator. Replaces Part Number 6750CL0001D, AH3603394, EA3603394, AP5331981, PS3603394.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: California’s Proposition 65 

Read more less

(4 Pack) XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse – Universal HVAC Replacement Product Description Protect your HVAC system’s control board with the XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse (4 Pack). These high-quality aftermarket blade fuses are designed to safeguard furnace and air conditioner control boards from electrical overloads and short circuits. A blown 5-amp fuse can cause the HVAC system to stop working entirely. Replacing it with reliable XPATC5 fuses helps restore operation while protecting sensitive electronic components. XPATC5 fuses are commonly used in residential HVAC systems and are ideal to keep on hand for quick repairs. Replaces Part Numbers ATC-5, ATO-5, 5 Amp HVAC Control Fuse, Furnace Control Board Fuse, Air Conditioner 5A Fuse Compatibility This 5 amp HVAC control board fuse is compatible with many furnace and air conditioner systems from manufacturers including Carrier, Trane, Lennox, Goodman, Rheem, York, and others that use standard ATC/ATO 5-amp blade fuses. Always verify fuse amperage and type before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Built to OEM-equivalent electrical specifications ⚡ 5 Amp Rating – Protects HVAC control boards from overloads 🧯 Critical Safety Component – Helps prevent damage to circuit boards 📦 Convenient 4-Pack – Keep spares on hand for future service 💰 Cost-Effective Solution – Affordable alternative to OEM HVAC fuses 📐 Product Specification Part Number: XPATC5 Component Type: HVAC Control Board Fuse Amperage Rating: 5 Amp Voltage Rating: 32V Fuse Style: ATC / ATO Blade Fuse Quantity: 4-Pack Application: Furnace & air conditioner control boards Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Needle-nose pliers or fuse puller ⚠️ Safety First: Always turn off power to the HVAC system before replacing fuses to avoid electrical shock or equipment damage. Basic Steps: Shut off power to the furnace or air conditioner. Open the control board access panel. Locate the blown 5-amp fuse. Remove and replace it with a new XPATC5 fuse. Restore power and test system operation. ⏱️ Time Required: 5 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket HVAC Parts 🔄 30-Day Return Policy Protect your HVAC system and keep it running — Add to Cart Now for a reliable, budget-friendly solution!

Read more less

2187145 Refrigerator Genuine Compressor Overload Replaces Part Numbers: WP2187145, OEM24024106, AP6006026, 2187145, 2-34286-038, 4431117, 8206664, PS11739089, W10306725. Description: This Compressor Overload is a Genuine OEM part for specific Whirlpool, Kenmore refrigerator models.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less