W10335056 Washer Genuine OEM Water Level Switch Pressure Switch
Replaces Part Numbers: W10335056, 1617123, 3366846, AH3408073, EA3408073, AP4566382, PS3408073, W10335056VP.
Description: This Pressure Switch is a Genuine OEM part for specific Whirlpool washing machine models. This part ensures your machine fills with the correct amount of water for the selected cycle, preventing overfilling or insufficient water levels that can lead to suboptimal washing results. A faulty Pressure Switch can result from several issues, including clogging with detergent residue or debris, wear and tear from regular use, or electrical malfunctions affecting its responsiveness.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11168740 Washer Genuine OEM Cold Water Inlet Valve
The W11168740 is a genuine Whirlpool OEM cold water inlet valve for Whirlpool top-load washers, and also fits select Kenmore, Maytag, KitchenAid, Amana, and related models. Located at the rear of the washer, this valve connects to the cold water supply and solenoid wiring, opening to admit cold water into the tub as the cycle calls for it and closing once the correct fill level is reached.
Blue in color, with two solenoids, a standard hose fitting inlet, and a single water outlet. Common causes of failure include a worn internal seal that no longer closes fully, or general electrical wear in the solenoid. Symptoms of a failing valve include the washer not getting any cold water, filling slowly, not filling at all, or continuing to fill or leak water even after the washer has been unplugged. It directly replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073.
Quick Answer
The W11168740 Washer Genuine OEM Cold Water Inlet Valve fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Amana top-load washers that aren't getting cold water, are filling slowly, aren't filling at all, or keep leaking or filling even when unplugged. Blue, two solenoids. Replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073. If water keeps running even after the washer is unplugged, try shutting off the cold water supply valve — if that stops it, the cold water inlet valve isn't closing properly and needs replacing.
Common Problems This Part Fixes
Washer not getting any cold water
Washer filling slowly
Washer not filling at all
Water continuing to fill or leak even after the washer is unplugged
Cycle stalling at the fill step and never advancing to wash
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer cold water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11168740, WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cold water inlet valve is compatible with select Whirlpool top-load washers, and also fits select Kenmore, Maytag, KitchenAid, and Amana washers built on the Whirlpool platform.
Note: This is the cold water valve only — a separate hot water valve is used alongside it on the same washer. If your washer isn't getting hot water rather than cold, you likely need the companion hot water valve instead. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which valve your washer needs.
Key Features
Genuine Whirlpool OEM part — factory-specified solenoid design and flow rate
Regulates cold water flow into the washer tub during fill
Resolves "no cold water," "fills slowly," "won't fill," and "leaks or fills when unplugged" symptoms
Blue color with two solenoids
Standard hose fitting inlet, single water outlet
Direct drop-in replacement — matches the original mounting and hose connections
Replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, and Amana top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, typically 20 to 30 minutes
Product Specifications
Part Number
W11168740
Part Type
Washer Cold Water Inlet Valve
Condition
Genuine OEM
Brand
Whirlpool
Location
Rear of the appliance
Color
Blue
Solenoids
2
Inlet
Standard hose fitting
Outlet
1
Repair Difficulty
Easy — 20 to 30 minutes
Quantity
1 valve (sold individually)
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access is at the rear of the washer, where both the cold and hot water inlet valves are typically mounted together, each secured with just a few screws. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical clamps and the water hose from the old cold water valve, remove the mounting screws, and pull it free. Install the new W11168740 in the same position, reconnect the water hose and electrical clamps fully, and secure the mounting screws. While you're in this area, consider replacing the fill hose at the same time if it shows signs of wear, since it's easy to access during this same repair. Restore the water supply and power, then run a full test cycle to confirm correct fill behavior with no leaking. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
Water keeps running even after I unplug my washer. Is this the valve I need?
Yes, this is a documented symptom of a cold water inlet valve that's no longer closing properly. One customer had exactly this experience — after unplugging the washer, water continued to run, and shutting off the cold water supply valve at the wall stopped it. That confirmed the cold water inlet valve itself wasn't sealing shut, even with no power to the washer, and replacing it resolved the issue.
Should I replace the hot water valve at the same time?
It's worth considering, especially if both valves are the same age. Several customers have replaced both the hot and cold valves together in a single repair, since they're mounted in the same area and access is already open — one customer described it as "very quick & easy" to do both at once.
Is this a difficult repair?
No, this is a straightforward repair. Multiple customers describe it as easy, typically secured with just a few screws and simple electrical clamp connections — one review specifically noted the whole job took about 20 minutes.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the cold water inlet valve originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5304528029 Washer Water Valve
Dispenser Valve Gaskets are Not Included
Washer water inlet valve.
5 Solenoid Coils, 5 Outlets
Fits Specific Electrolux, Frigidaire front load washer models.
Replaces Part Numbers:5304528029, 5304514790, 5304522534, AP7014477, PS16544354.
Description: This Water Valve is a replacement part for specific Electrolux, Frigidaire washing machine models. This part controls the entry of water into the washer during the wash and rinse cycles. Common causes of a bad valve include mineral deposits from hard water, electrical issues, or general wear and tear over time.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WH01X20826 Washing Machine Shock Absorber
The XPARTCO WH01X20826 is an aftermarket replacement shock absorber (damper) for GE front-load washers. The wash tub inside a front-load washer hangs suspended inside the cabinet, and a set of these shock absorbers is what controls that movement — dampening the tub's vibration and motion during spin so it doesn't bang against the cabinet or shake the whole machine. These washers typically use four shock absorbers working together around the tub, and this listing is for a single individual shock absorber.
Over time the internal damping material in these shocks wears out, or the shock can physically separate from its mounting point — something that can also happen if the washer is moved or shifted without the tub properly secured first. Because all four shocks on a given washer are typically the same age and under the same stress, if one has failed the others are often not far behind — many technicians recommend ordering four of this same part and replacing the full set together as a preventative measure. A worn or detached shock absorber produces a very recognizable symptom: excessive vibration, shaking, or banging noise during the spin cycle, sometimes strong enough that the washer visibly moves or "walks" across the floor. It directly replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130.
Quick Answer
The XPARTCO WH01X20826 Washing Machine Shock Absorber fixes GE front-load washers (and select Hotpoint, Haier, Monogram, Café, and Kenmore models built on the GE platform) that vibrate, shake, or bang excessively during spin, or seem to "walk" across the floor. Sold as a single individual shock absorber. Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130. These washers use four shock absorbers total — if one has failed, order four of this part to replace the full set, since they wear on the same schedule.
Common Problems This Part Fixes
Excessive vibration or shaking during the spin cycle
Loud banging or knocking noise from inside the cabinet during spin
Washer that seems to "walk" or move across the floor during operation
Tub striking the cabinet frame or nearby panels
Shock absorber that has visibly separated or detached from its mounting point
Noise or vibration that started or worsened after the washer was moved or relocated
Visible wear, cracking, or looseness in the shock absorber material
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washing machine shock absorber directly replaces the following OEM and cross-reference part numbers:
WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This shock absorber is compatible with select GE front-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform.
Note: GE uses several different shock absorber part numbers across its washer lineup, including separate parts such as WH01X10727 and WH03X29516 for other platforms. This WH01X20826 shock is specific to the front-load models listed above and is not interchangeable with those other GE shocks. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement shock absorber — dampens tub vibration and movement during spin
Sold individually — order four to replace the full set on a typical front-load washer
Resolves "excessive vibration," "banging or knocking noise," and "washer walking across the floor" symptoms caused by worn or detached shocks
Durable plastic and rubber construction for long-term damping performance
Direct drop-in replacement — no modification required
Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130.
Compatible with GE, Hotpoint, Haier, Monogram, Café, and select Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPWH01X20826
OEM Part Number
WH01X20826
Part Type
Washing Machine Shock Absorber (Damper)
Condition
Aftermarket Replacement
Application
GE Front-Load Washers
Material
Plastic and rubber
Function
Dampens tub vibration and movement during spin
Typical Quantity Per Washer
4 (this listing is for 1 individual shock)
Quantity
1 shock absorber
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting — Consider Replacing All Four Shocks Together Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access to the shock absorbers typically requires removing the top and/or front panel of the washer to reach the tub suspension points — check your model's service diagram, since access varies. Photograph how each old shock absorber connects to the frame and the tub before removing anything, since these components are symmetrical around the tub and easy to reverse or mismatch. Disconnect the old shock absorber from its mounting point at both the frame and tub ends, and remove the mounting pin. Install the new shock absorber in the same position with its mounting pin, matching the original orientation. If you're only replacing one shock, be aware the remaining three original shocks are the same age and under the same stress — many technicians recommend ordering three more of this same part and replacing all four together to avoid reopening the washer again soon after. Once installed, gently rock the tub by hand to confirm even resistance at each corner before reassembling the panels. Restore power and run a full spin cycle to confirm the vibration, shaking, or banging noise has resolved. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
Do I need to order more than one of these?
This listing is for a single shock absorber, but GE front-load washers use four of them working together around the tub. If one has failed, it's strongly worth ordering four total and replacing the full set, since all four are typically the same age and have been under the same stress — replacing just one risks having to reopen the washer again soon after for the next one.
My washer started shaking right after I moved it to a new spot. Is that related?
Yes, this is a documented cause of shock absorber problems on this platform. If the tub wasn't properly secured or the washer was tilted significantly during a move, one or more shock absorbers can separate from their mounting point. Check that all four shocks are still properly connected at both ends before assuming a shock itself has failed — sometimes reseating a separated shock is all that's needed, though if it shows wear it's worth replacing regardless.
How much vibration is normal, and how do I know it's actually the shocks?
Some vibration during high-speed spin is normal, especially with an unbalanced load. But vibration strong enough to move the washer across the floor, or accompanied by a banging or knocking noise from inside the cabinet, points to a suspension problem rather than a simple unbalanced load. Try redistributing the laundry evenly in the drum and running the spin cycle again — if the shaking persists with a balanced load, inspect the shock absorbers for wear, cracking, or separation.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions, mounting configuration, and damping performance of the original WH01X20826 shock absorber used in compatible GE, Hotpoint, Haier, Monogram, Café, and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11220230 Washer Water Inlet Valve
The XPARTCO W11220230 is an aftermarket replacement washer water inlet valve designed to control the flow of hot and cold water into your washing machine during each cycle. This Water Inlet Valve is a replacement part compatible with specific Maytag, Whirlpool washing machine models. This valve controls water flow into the tub by opening at predetermined points in the cycle. Proper water regulation is necessary for optimum cleaning performance..
Over time, inlet valves can fail due to mineral buildup, electrical issues, or worn internal seals — leading to slow filling, no fill, or continuous water flow. Replacing the valve restores proper water control and helps prevent leaks or cycle errors.
Quick Answer
The XPARTCO W11220230 Washer Water Valve fixes washers that won’t fill, fill too slowly, or won’t stop filling with water. It controls incoming water flow and restores proper wash cycle operation.
Common Problems This Part Fixes
Washer not filling with water
Slow water fill during cycles
Water continuously flowing into washer
Incorrect water temperature
Washer stopping due to fill errors
Leaking or stuck inlet valve
Replaces Part Numbers
This water inlet valve replaces the following part numbers:
W11220230, W10853296, 4591408, W10632527, W10758829, W11096268, AWP43504, EAP12349461, PD00042661, AP6329544, PS12349461
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select washers from the following brands:
Whirlpool washers
Maytag washers
Amana washers
Kenmore / Sears washers (select models)
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Three coil hot and cold water valve.
OEM-equivalent fit, performance, and durability
Restores proper water fill levels and cycle operation
Durable construction resists mineral buildup and wear
Prevents leaks and overfilling issues
Direct replacement for W11220230 valve assembly
Product Specifications
Part Number
W11220230
Part Type
three coil hot and cold water inlet valve.
Application
Top Load / Front Load Washers
Condition
Aftermarket Replacement
Function
Controls Water Flow
Compatible Brands
Whirlpool, Maytag, Amana, Kenmore
Installation Notes
⚠️ Safety First — Disconnect Power & Water Supply Unplug the washer and turn off the water supply before servicing. Remove the rear or top panel to access the inlet valve. Disconnect water hoses and electrical connectors, then remove the mounting screws to replace the valve. Reconnect hoses securely to avoid leaks and test for proper operation after installation.
Frequently Asked Questions
What does a washer water inlet valve do?
It controls the flow of hot and cold water into the washer. When the valve fails, the washer may not fill properly or may overfill.
Will this fix a washer that won’t fill?
Yes, a faulty inlet valve is one of the most common causes of no-fill or slow-fill issues.
Is this an OEM part?
This is a high-quality aftermarket replacement built to OEM-equivalent standards for performance and durability.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in high-quality replacement parts. Fast shipping from our U.S. warehouse and expert support available to help verify compatibility.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10734521 Washer Clutch Slider Kit
The XPARTCO W10734521 is an aftermarket replacement washer clutch slider kit compatible with a wide range of Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Crosley, Estate, Jenn-Air, Roper, Magic Chef, Admiral, and Kirkland HE top-load washers. The clutch slider kit is part of the drive system that engages and disengages the inner tub from the gearcase — it's responsible for transitioning the washer between agitation and spin modes. The slider gear works together with the electromagnetic clutch and gearcase to move the inner tub during the wash and spin portions of every cycle. When the slider or its spring fails, the washer typically won't spin properly, won't agitate, makes grinding noise, or leaves clothes soaking wet at the end of a cycle.
This kit includes the slider, spring support, 30mm spiral, and bolt. Slider dimensions: 2-7/8" outer diameter x 7/8" deep. Support spring: 1-5/8" outer diameter x 1-1/8" long. Spiral: 1-5/16" outer diameter. Bolt: 7/8" head diameter x 1" high. Construction is metal and plastic in black, white, and gray. Important: this is the slider kit only — it does NOT include the electromagnetic clutch (sold separately as W10754448). The current W10734521 part number supersedes the earlier W10006484, W10006494, W10275082, W10447975, and W10905025. It also replaces 3452506, AP5952873, EAP10060062, PD00025495, and PS10060062. Installs in 60–90 minutes with basic hand tools.
Quick Answer
The XPARTCO W10734521 Washer Clutch Slider Kit fixes Whirlpool, Maytag, Kenmore, KitchenAid, and related HE top-load washers that won't spin or agitate properly, won't transition between cycle phases, leave clothes soaking wet, or make grinding noise during the spin cycle. Slider kit only — electromagnetic clutch (W10754448) is sold separately. Includes slider (2-7/8" OD), spring support (1-5/8" OD), 30mm spiral, and bolt. Replaces W10006484, W10006494, W10275082, W10447975, W10905025, 3452506, AP5952873, EAP10060062, PD00025495, PS10060062.
Common Problems This Part Fixes
Washer won't spin or spins very slowly — slider not engaging the gearcase for spin mode
Washer won't agitate — slider not transitioning the drive system to agitation mode
Clothes left soaking wet at the end of the cycle — incomplete spin
Grinding, rattling, or clunking noise during the spin or agitation phase
Washer fills and drains normally but never spins or agitates
Worn or broken slider gear teeth visible on the drive assembly
Weak or broken slider spring — washer drive losing positive engagement
Repeated cycle interruptions in the spin or agitation portion of cycles
What's in the Kit
Part 1
Slider Gear
2-7/8" outer diameter x 7/8" deep · Slides over the drive assembly shaft to engage/disengage the gearcase for agitation and spin transitions · Install with the teeth facing outward
Part 2
Spring Support
1-5/8" outer diameter x 1-1/8" long · Provides return tension for the slider · Replace whenever the gearcase or slider is replaced — spring can weaken over time
Part 3
30mm Spiral
1-5/16" outer diameter · Spiral retaining component that holds the slider assembly together on the drive shaft
Part 4
Bolt
7/8" head diameter x 1" high · Secures the assembly
Replaces Part Numbers
This clutch slider kit directly replaces the following OEM and cross-reference part numbers:
W10734521, 3452506, W10006484, W10006494, W10275082, W10447975, AP5952873, AWP41487, EAP10060062, PD00025495, PS10060062.
W10734521 is the current production part superseding W10006484, W10006494, W10275082, W10447975, and W10905025. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This clutch slider kit is compatible with select HE top-load washers from the following brands:
Whirlpool top-load washers (Cabrio, WTW5000, WTW5500, WTW5700, WTW6000, WTW6200, WTW6400, WTW7000, WTW7120, WTW8000, WTW8200, WTW8500, WTW8700 series and related models)
Maytag top-load washers (Bravos and Centennial series and related models)
Kenmore / Sears top-load washers (Whirlpool-built — select 110-series and related models)
KitchenAid top-load washers (select models)
Amana top-load washers (select models)
Crosley top-load washers (select models)
Estate top-load washers (select models)
Jenn-Air top-load washers (select models)
Roper top-load washers (select models)
Magic Chef top-load washers (select models)
Admiral top-load washers (select models)
Kirkland top-load washers (select models)
Important — Slider Kit Only, NOT Clutch: This is the clutch slider kit (slider, spring, spiral, bolt) — it does not include the electromagnetic clutch assembly. The electromagnetic clutch is part number W10754448 and is sold separately. If you need both components, order each part separately. Many repair scenarios call for replacing both at the same time, since both wear together. Always verify your model number and confirm exactly which component has failed before ordering.
Key Features
Complete slider repair kit — slider, spring support, 30mm spiral, and bolt included as a matched set
Works with the electromagnetic clutch and gearcase to drive the inner tub during agitation and spin modes
Resolves "won't spin," "won't agitate," and "clothes left soaking wet" symptoms when the slider has worn or the spring has weakened
Current production part number — supersedes W10006484, W10006494, W10275082, W10447975, and W10905025
Slider: 2-7/8" outer diameter x 7/8" deep · Spring: 1-5/8" OD x 1-1/8"L · Spiral: 1-5/16" OD · Bolt: 7/8" head x 1"H
Metal and plastic construction in black, white, and gray
Important: slider kit only — electromagnetic clutch (W10754448) sold separately
For full performance, replace all components in the kit together as a set
Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Crosley, Estate, Jenn-Air, Roper, Magic Chef, Admiral, and Kirkland HE top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 60–90 minutes with basic hand tools
Product Specifications
Part Number
W10734521
Supersedes
W10006484, W10006494, W10275082, W10447975, W10905025
Part Type
Washer Clutch Slider Kit
Condition
Aftermarket Replacement
Application
HE Top-Load Washers (Whirlpool platform)
Includes
1x Slider, 1x Spring Support, 1x 30mm Spiral, 1x Bolt
Slider Dimensions
2-7/8" Outer Diameter x 7/8" Deep
Spring Support Dimensions
1-5/8" Outer Diameter x 1-1/8" Long
Spiral Dimensions
1-5/16" Outer Diameter
Bolt Dimensions
7/8" Head Diameter x 1" High
Material
Metal / Plastic
Color
Black / White / Gray
Electromagnetic Clutch
NOT included — see W10754448 (sold separately)
Compatible Brands
Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Crosley, Estate, Jenn-Air, Roper, Magic Chef, Admiral, Kirkland
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves Disconnect power and turn off the water supply before beginning. Place towels under the washer — some residual water may spill from hoses during disassembly. Wear work gloves to protect your hands. Unthread the hot and cold water supply hoses from the inlet valve ports. Disconnect the drain hose from the outlet port using channel-lock pliers to release the spring clamp. Carefully tip the washer onto its side or back on a padded surface to access the underside. Disconnect the wiring harnesses to the drive motor and pull the rotor free — be prepared for some resistance, as the permanent magnets in the rotor require some effort to remove. Use a small awl inserted between the slider gear teeth to release the spring retainer. With the retainer released, pull off the old spring and slider gear. Note the orientation of the slider — teeth facing outward. Install the new W10734521 components in sequence: slide the new slider gear onto the drive assembly shaft with teeth facing outward, install the new spring support and 30mm spiral, and secure with the new bolt. Reinstall the rotor (the magnets will pull it into place), reconnect the wiring harnesses, return the washer to upright, reconnect supply hoses and drain hose, restore power and water, and test the spin cycle for proper function. Tools needed: Phillips screwdriver, socket set, channel-lock pliers, small awl, padded surface for tipping, work gloves.
Frequently Asked Questions
What's the difference between W10734521 and W10754448?
These are two different parts in the same drive system. The W10734521 is the clutch slider kit — it includes the slider gear, spring support, spiral, and bolt that physically engage/disengage the inner tub from the gearcase to transition between agitation and spin modes. The W10754448 is the electromagnetic clutch itself — the electrical component that drives the engagement. Both can fail independently, and many repair scenarios call for replacing both at the same time since they work together. Confirm exactly which component has failed before ordering, or order both if you're rebuilding the drive system as a full repair.
My washer won't spin — is it the slider or something else?
A washer that won't spin can have several causes: a failed slider kit, a failed electromagnetic clutch (W10754448), a damaged drive belt, a failed motor or rotor, a broken lid switch, or — on some models — a failed gearcase. The slider kit is one of the more common causes when the symptom is "fills and drains but won't spin" with no obvious noise or burning smell. Before replacing the slider, check that the lid latch strike (W11457841 on some models) is engaging properly, the drive belt is intact, and the motor is functioning. If those check out and the slider gear shows visible wear, missing teeth, or a stretched spring, the W10734521 kit is the right repair.
Should I replace all parts in the kit together?
Yes — for the kit to perform as designed, all components should be replaced as a matched set. The slider, spring support, spiral, and bolt all work together — if one is worn, the others have typically experienced the same load and wear. Reusing old components alongside new ones can cause premature failure of the new parts and a repeat repair. The W10734521 kit is priced and packaged for a complete replacement, so install all four pieces during your repair.
What is the difference between W10734521 and the older part numbers it replaces?
W10734521 is the current production version of this slider kit. It directly supersedes W10006484, W10006494, W10275082, W10447975, and W10905025 — all of which were earlier OEM part numbers for variations of the same slider kit across production revisions. Whirlpool consolidated these into the W10734521 to streamline the parts catalog. If your washer's parts diagram shows any of these older numbers, the W10734521 is the correct current replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and plastic to match the dimensions, gear profile, and drive engagement function of the original W10734521 clutch slider kit used in compatible Whirlpool, Maytag, Kenmore, and related HE top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
DC34-00025G Washer Genuine OEM Lid Switch and Lock Assembly – Fits Samsung Washers
Product Overview
The DC34-00025G Washer Lid Switch and Lock Assembly is a genuine OEM replacement part that ensures your washer lid stays securely locked during wash and spin cycles. This part detects when the lid is closed and locks it to prevent accidental opening, providing safety and proper cycle operation. A worn or broken lid lock can cause your washer to stop mid-cycle, display error codes, or fail to start. Replacing it restores dependable washer performance and safety compliance.
Replaces Part Numbers
This lid switch and lock assembly replaces DC34-00025G, AP6884125, PS12720530.
Manufactured to original equipment specifications for a precise fit and long-term durability.
Compatible Brands
Compatible with select Samsung top-load washers manufactured by Samsung. Fits a variety of models using this specific lid lock assembly.
Fixes the Following Issues
Washer won’t start or stops mid-cycle
Lid doesn’t lock properly
Error codes related to lid switch or lock failure
Washer won't enter spin or drain cycles
Why Buy from Parts‑O‑Matic
Factory-original genuine OEM part
Fast and free U.S. shipping
Trusted by appliance professionals and DIYers
Backed by reliable customer support
ERP DC97-16350C Washer Suspension Support Rod - Compatible with Samsung Washers
Product Description
Stabilize your washer with the replacement DC97-16350C Washer Suspension Support Rod. This replacement suspension rod and spring assembly is designed for select Samsung top-load washers, supporting the washer tub to minimize vibration and noise during operation. It addresses issues like excessive shaking, off-balance drums, or "DC" error codes, offering a cost-effective alternative to OEM parts.
Note: Includes one suspension rod and spring assembly (approximately 25.6" long). Sold individually; recommend replacing all four rods for optimal performance. Disconnect power before installation. Verify compatibility with your washer model.
Replaces part numbers: DC97-16350C, DC97-16350J, 3282689, DC97-05280K, PD00007282, EAP4221572, AP5623264, PS4221572.
Compatibility:
Compatible with models including but not limited to:
Samsung: WA400PJHDWR/AA-01, WA400PJHDWR/AA-02, WA400PJHDWR/AA-03, WA422PRHDWR/AA-00, WA422PRHDWR/AA-01, WA422PRHDWR/AA-02, WA45H7000AW/A2, WA45M7050AW/A4
Other brands: Select models requiring DC97-16350C
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung top-load washers requiring DC97-16350C.
🔥 Specifications: Replacement suspension rod and spring assembly, approximately 25.6" long, designed to absorb shock and reduce vibration.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 10–15 minutes per rod.
🛡️ Effective Fixes: Resolves excessive shaking, off-balance drums, noise, or "DC" error codes.
Product Specification
Part Number: DC97-16350C
Component Type: Washer suspension support rod and spring assembly
Material: Durable ABS plastic and metal with high-tension spring
Dimensions: Approximately 25.6" L (rod and spring assembly)
Operating Conditions: Suitable for high-vibration washer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source before installation.
Tools Needed: Phillips screwdriver, work gloves, optional pliers.
Process: Access the washer tub, remove the old suspension rod, and install the new one, ensuring secure attachment to the tub and base.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
XPARTCO 22003483 Washer Drive Belt
The XPARTCO 22003483 is an aftermarket replacement drive belt for Whirlpool-built Maytag Atlantis top-load washers. This belt is the mechanical link between the drive motor and the washer's drive system — it's what actually transmits the motor's rotation to spin the drum, so both agitation and spin depend entirely on this belt gripping its pulleys correctly and staying properly tensioned.
Made of black rubber, this belt measures 52 inches long. Over years of use, the belt material gradually hardens and glazes over, becoming smooth and "slick" rather than gripping the pulleys firmly — this degradation can cause the belt to slip under load even before it shows any visible cracking or damage. A worn belt produces a range of symptoms depending on how far the wear has progressed: the washer may pump water but fail to spin, fail to agitate at all, spin noticeably slower than normal, or produce a chirping or slipping noise, especially as the motor shifts between wash and spin modes. It directly replaces WP22003483, WP22003483VP, AP6006365, PS11739438, 22002709, 62608400, 62618130, and 824667.
Quick Answer
The XPARTCO 22003483 Washer Drive Belt fixes Maytag (Whirlpool-built) top-load washers that pump but won't spin, won't agitate, spin slowly, or make a chirping/slipping noise as the motor shifts modes. 52 inches long, black rubber. Replaces WP22003483, WP22003483VP, AP6006365, PS11739438, 22002709, 62608400, 62618130, 824667. A belt can slip and cause symptoms well before it looks visibly worn — years of use leave the rubber "slick" and unable to grip the pulleys properly, even without visible cracking.
Common Problems This Part Fixes
Washer pumps water but won't spin
Washer won't agitate
Washer spins noticeably slower than it used to
Chirping or slipping noise, especially as the motor shifts between wash and spin modes
Belt that has become glazed, hardened, or "slick" from years of use
Visible cracking, fraying, or glazing on the belt surface
General noise or vibration during the wash or spin cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive belt directly replaces the following OEM and cross-reference part numbers:
WP22003483 22003483, 22002709, 62618130, 824667, AP6006365, EAP11739438, WP22003483VP, AWP47150, PD00002551, PS11739438
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive belt is compatible with select Maytag Atlantis top-load washers built on the Whirlpool platform, including model numbers such as:
MAV4057AWQ, MAV4057AWW, MAV4500AWW
MAV5000AWQ, MAV5000AWW, MAV5057AWQ, MAV5057AWW, MAV5960AWW
MAV6000AWQ, MAV6000AWW, MAV6057AWQ, MAV6057AWW
MAV6200AWQ, MAV6200AWW, MAV6250AWQ, MAV6250AWW, MAV6257AWQ, MAV6257AWW
MAV6548AWQ, MAV6548AWW, MAV6601AWQ, MAV6601AWW, MAV6650AWW, MAV7000AWQ
Note: Always verify your full model number before ordering, since Whirlpool and Maytag use different belt lengths and profiles across their washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement drive belt — transmits motor power to spin the washer drum
Resolves "pumps but won't spin," "won't agitate," "spins slowly," and "chirping/slipping noise" symptoms caused by belt wear
52 inches long, black rubber construction
Rides on three pulleys to transfer motor rotation to the drive system
Direct drop-in replacement matching the original length and profile
Replaces WP22003483, WP22003483VP, AP6006365, PS11739438, 22002709, 62608400, 62618130, and 824667
Compatible with Maytag Atlantis top-load washers built on the Whirlpool platform
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
22003483
OEM Part Number
WP22003483
Part Type
Washer Drive Belt
Condition
Aftermarket Replacement
Application
Maytag Atlantis Top-Load Washers (Whirlpool-Built)
Length
52 inches
Material
Rubber
Color
Black
Function
Transmits motor rotation to the drive system to spin the drum
Quantity
1 drive belt
Compatible Brand
Maytag (Whirlpool-built)
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the motor and belt area. Loosen the motor's mounting screws so the motor can be pushed toward the drum, releasing tension on the old belt. Slide the old belt off its three pulleys and remove it. Route the new 22003483 belt over the same three pulleys, matching the original path. With the belt in place, gently push the motor away from the drum by hand to apply tension, then tighten the motor's mounting screws while continuing to check belt tightness — the belt should have firm, even tension across all three pulleys with no excess slack. Reinstall the rear panel, restore power, and run a full test cycle through both agitate and spin to confirm smooth, quiet operation with no chirping or slipping. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
My washer makes a chirping noise when it shifts from agitate to spin. Is that the belt?
Yes, this is a documented symptom of a worn belt. One long-term owner traced this exact chirp to a 10-year-old belt that had become "slick" from age — smooth and hardened enough that it briefly slipped on the pulleys as the motor shifted between modes, rather than moving cleanly into position. Replacing the belt resolved the noise completely.
My belt doesn't look cracked or damaged. Could it still be the problem?
Yes. A belt can degrade in ways that aren't obvious at a glance — the rubber can harden and glaze over time, becoming slick and losing its grip on the pulleys even without visible cracking or fraying. If your washer is slipping, chirping, or spinning weakly and the belt has been in service for many years, age-related slickness is a reasonable explanation even if the belt still looks intact.
How do I know if I have the right belt length for my washer?
This belt is 52 inches long and specific to the Maytag Atlantis top-load platform. Whirlpool and Maytag use different belt lengths across other washer models, so always confirm your model number matches the compatibility list, or measure your old belt for comparison, before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the length, profile, and material of the original WP22003483 drive belt used in compatible Maytag Atlantis top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WH42X10650 Washer Control Panel, White
Replaces Part Numbers: WH42X10650, AP3995175, 1264621, AH1482468, EA1482468, PS1482468.
The WH42X10650 is a genuine GE replacement part, specifically designed as a control panel for GE washing machines. It houses and operates the control buttons and display, ensuring compatibility and reliability for your appliance.
W11248040 Washer Console (Control Panel Housing)
Genuine Whirlpool part
Replaces Part Number W11248040, 4845509, W11035013, W11120176, W11192407, PD00087512, EAP12584120, AP6783239, PS12584120.
Model Cross Reference
This part #W11248040 works with all models listed.
Kenmore / Sears
110.27132412
Washer
Kenmore / Sears
110.27132413
Washer
