XPARTCO W11130208 Refrigerator LED Light Module for W11683241
The XPARTCO W11130208 is an aftermarket replacement LED light module for Whirlpool, KitchenAid, and Kenmore Elite refrigerators. W11130208 has been officially superseded by Whirlpool's current part number, W11683241 — the two are the same lighting solution across production revisions, so this listing ships as the current W11683241 service kit and will correctly replace an original W11130208 module. These modules attach inside the cabinet and illuminate the refrigerator or freezer compartment with efficient LED lighting.
Rated 6V, these modules are wired in a series circuit — multiple modules connected end to end along a light strip. That series design has an important consequence for diagnosis: most "LED failures" that look like a complete lighting outage are actually just one burnt-out module dragging down the entire chain, not every module failing at once. A pigtail extension on the current kit design specifically addresses the most common DIY complaint with this repair — not being able to reach the connector behind the housing. Symptoms include dim or flickering lights, partial lighting where part of the compartment goes dark while the rest stays lit, or lights that don't turn on at all. It directly replaces AP7216885, W10279030, W10412708, W10623956, W10637153, WPW10637153, W10758333, W10876279, and W11203918.
Quick Answer
The XPARTCO W11130208 Refrigerator LED Light Module fixes Whirlpool, KitchenAid, and Kenmore Elite refrigerators with dim or flickering lights, partial lighting (part of the compartment dark while the rest stays lit), or lights that don't turn on at all. 6V modules, series circuit. Replaces AP7216885, W10279030, W10412708, W10623956, W10637153, WPW10637153, W10758333, W10876279, W11203918. This part number has been officially superseded by W11683241 — this listing ships as the current, direct-fit replacement.
Common Problems This Part Fixes
Refrigerator or freezer lights are dim or flickering
Part of the compartment is dark while the rest of the light strip still works
Lights don't turn on at all when the door is opened
Lighting that has gradually dimmed over time
One section of the light strip out while the remaining sections work normally
Inconsistent lighting that flickers intermittently rather than staying steady
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator LED light module directly replaces the following OEM and cross-reference part numbers:
W11130208, W10758333, W10412708, W10279030, W10637153, W10876279, AP6262381, PS12347525,
Single Light used in Kit W11683241, 4591417, 4982094, AP6262381, AP7216885, EAP17216451, EAP6262381, PS12347525, PS17216451, AWP46249, PD00084706
W11130208 is the earlier Whirlpool number for this part; W11683241 is the current part number. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This LED light module is compatible with select Whirlpool refrigerators, and also fits select KitchenAid and Kenmore Elite refrigerators built on the same platform, including model numbers such as:
Whirlpool: WRX988SIBM01, WRX988SIBW00, WRS973CIDM00, WRF991BOOM01, WRF989SDAM02, WRS965CIAM01, WRS965CIAE00
KitchenAid: KFIV29PCMS02, KRSC500ESS01, KRSF505EBL01, KRSF505ESS01, KRSF505EWH01
Kenmore: 10651173310, 10651762511, 10651763511, 10651764511, 10651769512, 59672389411
Note: This part is model-specific, not universal — several visually similar LED module kits exist across the Whirlpool lineup (including W11483116 and W10843353/W10695459 for other model groups) with different cross-reference sets. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which module fits your refrigerator.
Key Features
Aftermarket replacement LED light module — illuminates the refrigerator or freezer interior
Ships as the current W11683241 kit, the official replacement for the superseded W11130208 number
Resolves "dim or flickering lights," "partial lighting," and "lights won't turn on" symptoms
Rated 6V, wired in a series circuit
Pigtail extension design for easier access to the connector behind the housing
Pop-out, plug-in module replacement — no screwdriver or wire nuts needed for the module swap itself
Replaces AP7216885, W10279030, W10412708, W10623956, W10637153, WPW10637153, W10758333, W10876279, and W11203918
Compatible with Whirlpool, KitchenAid, and Kenmore Elite refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W11130208
OEM Part Number
W11130208
Part Type
Refrigerator LED Light Module
Condition
Aftermarket Replacement
Voltage
6V
Circuit Type
Series (multiple modules per strip)
Supersedes
Current part number is W11683241 (same solution, current revision)
Connector Design
Pigtail extension for easier housing access
Repair Difficulty
Medium — 30 to 60 minutes
Compatible Brands
Whirlpool, KitchenAid, Kenmore Elite
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Locate the light housing panel inside the refrigerator or freezer compartment where the dim, flickering, or dark section is located, and remove it to access the module strip — this typically requires basic hand tools depending on your model. Identify the specific module that has failed; a burnt-out module in the middle of the strip can cause everything downstream of it to go dark or dim, even though only that one module has actually failed. Pop the old module out of its housing and unplug its connector — the pigtail extension design makes it easier to reach this connector without fully disassembling the housing. Plug in the new module and press it back into the housing in the same position. Reinstall the housing panel, restore power, and open the door to confirm even, consistent lighting has been restored across the full strip. Tools needed: basic hand tools for housing access (model-dependent), work gloves.
Frequently Asked Questions
I ordered W11130208 but received a module marked W11683241. Is that correct?
Yes. W11130208 has been officially superseded by Whirlpool's current part number, W11683241 — they are the same lighting solution across production revisions, and W11683241 is what currently ships when this part is ordered. It installs and functions identically to the original W11130208.
Only part of my fridge light strip is dark. Do I need to replace the whole strip?
Not necessarily. These modules are wired in a series circuit, meaning several modules connect end to end along one strip. A single burnt-out module can cause everything downstream of it in that chain to go dark or dim, even though the rest of the modules are still perfectly good. In many cases, replacing just the failed module restores lighting to the whole strip rather than needing to replace every module.
I can't reach the connector behind the light housing. Is that normal?
This is a very common complaint with earlier module designs, and it's specifically what the pigtail extension on the current kit is designed to solve — it gives you more reach to access the connector without needing to fully disassemble the housing. If you're still struggling to reach it, double-check that you've removed all the housing fasteners for your specific model before forcing anything.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the 6V rating, series wiring, and housing fit of the original W11130208 / W11683241 LED light module used in compatible Whirlpool, KitchenAid, and Kenmore Elite refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR60X31522 Genuine OEM GE Refrigerator Evaporator Fan Motor
The WR60X31522 is a Genuine OEM GE replacement evaporator fan motor compatible with select GE, Hotpoint, RCA, and Americana top-mount freezer refrigerators. The evaporator fan motor is located at the back of the freezer compartment and circulates air across the evaporator coils — converting the heat from the air into cool air that's then distributed throughout both the freezer and fresh food sections. Without a properly functioning evaporator fan, the refrigerator can't move cold air where it's needed, causing the fresh food and/or freezer sections to warm up, ice to build up on the coils, and the compressor to run continuously trying to compensate.
This 115V AC motor is rated at 60Hz, 3.3W and uses a 2-pin connector plus ground wire. Dimensions are 3-1/4"L x 2-3/8"W x 3-3/8"H, with a harness and plug extending approximately 3-1/2" from the motor. Construction is plastic and metal in marbled white & gray. Note: this listing is for the motor with harness only — the fan blade may need to be transferred from the old motor. It directly replaces WR60X10045, WR60X10046, WR60X10072, WR60X10138, WR60X10141, WR60X10346, WR60X23584, WR60X27646, WR60X28783, WR60X28784, WR60X31122, WR60X31523, 4959523, 197D2038P031, AP6977246, EAP12741350, PD00062864, and PS12741350. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The WR60X31522 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, RCA, and Americana top-mount freezer refrigerators that aren't cooling properly, have heavy frost buildup on the evaporator coils, run continuously, or are noisy from the freezer compartment. 115V AC, 60Hz, 3.3W. 2-pin connector + ground wire. 3-1/4"L x 2-3/8"W x 3-3/8"H. Marbled white & gray. Replaces WR60X10045, WR60X10046, WR60X10072, WR60X10138, WR60X10141, WR60X10346, WR60X23584, WR60X27646, WR60X28783, WR60X28784, WR60X31122, WR60X31523, 4959523, 197D2038P031, AP6977246, EAP12741350, PD00062864, PS12741350.
Common Problems This Part Fixes
Refrigerator fresh food and/or freezer sections not cooling properly
Heavy frost or ice buildup on the evaporator coils ("Antarctica" frost)
Loud whining, grinding, or scraping noise from the freezer compartment
Fan blade not spinning when checked by hand or stiff/seized rotation
Refrigerator running continuously trying to maintain temperature
Compressor running but cool air not being circulated
Motor failing continuity test with a multimeter
Visible damage to the fan motor or its harness
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X31522, WR60X23584, WR60X10141, WR60X10346, WR60X28783, WR60X10045, WR60X10046, WR60X10072, WR60X10138, WR60X27646, WR60X28784, WR60X31122, AGE29819, 115V-60Hz 3.3W, 197D2038P031, UDQR002GLL, FDQR002GSL, AGE29819, PD00062864, AP6977246, PS12741350.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE, Hotpoint, RCA, and Americana refrigerators, typically top-mount freezer units:
GE top-mount refrigerators (select models)
GE Profile and Café refrigerators (select models)
Hotpoint refrigerators (select models)
RCA refrigerators (select GE-built models)
Americana refrigerators (select GE-built models)
Note: Some refrigerator models have two evaporator fan motors — one in the fresh food section and one in the freezer section. The WR60X31522 is typically the freezer-section evaporator fan motor on top-mount style refrigerators. Confirm the failed motor's location and that the WR60X31522 part number matches your refrigerator's parts diagram before ordering. Always verify your appliance model number first.
Key Features
Evaporator fan motor for the freezer compartment of compatible GE/Hotpoint top-mount refrigerators
Pulls air through the evaporator coils to remove heat and circulate cool air throughout the refrigerator
115V AC, 60Hz, 3.3W — correct electrical specifications for compatible GE-platform refrigerators
2-pin connector plus ground wire — direct plug-in installation with the included harness
Dimensions: 3-1/4"L x 2-3/8"W x 3-3/8"H; harness and plug extend approximately 3-1/2" from the motor
Marbled white & gray plastic and metal construction
Replaces 18 OEM and aftermarket cross-reference part numbers including WR60X10045, WR60X10141, WR60X23584, WR60X27646, WR60X28783, WR60X31122, and PS12741350
Compatible with GE, Hotpoint, RCA, and Americana refrigerators (top-mount freezer units)
Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
WR60X31522
Part Type
Refrigerator Evaporator Fan Motor (Freezer Section)
Condition
Genuine OEM
Application
Top-Mount Freezer Refrigerators (GE platform)
Voltage
115V AC
Frequency
60 Hz
Wattage
3.3W
Connector
2-pin connector plus ground wire
Dimensions
3-1/4"L x 2-3/8"W x 3-3/8"H
Harness Length
Approximately 3-1/2" from motor
Color
Marbled White & Gray / Gray
Material
Plastic / Metal
Includes
Evaporator fan motor with harness and plug (fan blade may need to be transferred from old motor)
Compatible Brands
GE, Hotpoint, RCA, Americana
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located at the back of the freezer compartment, behind an interior access panel. Remove the freezer shelves and any internal components blocking access to the rear panel. Remove the screws holding the rear access panel in place to expose the evaporator coils and fan motor. Photograph the wire connections and fan blade orientation before disconnecting. Disconnect the 2-pin wire harness connector and the ground wire from the old motor. Note the orientation of the fan blade on the motor shaft — the blade typically presses onto the shaft and may need to be transferred to the new motor. Remove the mounting screws or release the motor from its mounting bracket, and pull the old motor free. Carefully transfer the fan blade to the new WR60X31522 motor in the same orientation (or use a new blade if you have one). Install the new motor in the same position, reconnect the wire harness and ground wire, and reinstall the access panel and shelves. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
How do I know if the evaporator fan motor has failed?
The most common symptoms are: the refrigerator or freezer is warmer than its set temperature even though the compressor sounds like it's running normally; heavy frost or ice buildup on the evaporator coils behind the freezer access panel ("Antarctica" frost); and loud whining, grinding, or scraping noise from the freezer area. To confirm: unplug the refrigerator, remove the rear freezer access panel, and try turning the fan blade by hand. If it doesn't spin freely or is stiff/seized, the motor bearing has failed. You can also test for motor continuity with a multimeter — no continuity confirms electrical failure.
My refrigerator has two evaporator fans — which one does this replace?
Some refrigerator models have two evaporator fan motors — one in the fresh food section and one in the freezer section. The WR60X31522 is typically the freezer-section evaporator fan motor on top-mount style GE and Hotpoint refrigerators. If your symptom is "freezer not cooling properly" or "frost on freezer coils," this is the correct part. If your symptom is specifically "fresh food section warm while freezer is fine" on a French door refrigerator, you may need a different fan motor — contact our support team with your model number to confirm.
Does this motor come with the fan blade?
No — the WR60X31522 listing is for the motor with harness and plug only. The fan blade is typically transferred from the old motor: carefully pull it off the old motor shaft (it presses on, no hardware needed), and press it onto the new motor shaft in the same orientation. If your old fan blade is damaged or cracked, it should be replaced separately. Installing the blade in the wrong direction will reverse the airflow and reduce cooling performance.
What's the difference between the WR60X31522 (115V AC) and DC motors like the WR60X10209 or WR60X26866?
GE refrigerators use different fan motor technologies across model generations. The WR60X31522 is a 115V AC motor with a 2-pin connector plus ground — used in many GE and Hotpoint top-mount freezer refrigerators. The WR60X10209 and WR60X26866 are DC voltage motors (around 11–14V DC) used in newer GE French door refrigerators with electronic control boards that supply variable DC voltage for energy-efficient variable-speed fan operation. These are not interchangeable — always verify the correct part number for your specific refrigerator model before ordering.
Is this an OEM or aftermarket part?
This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same evaporator fan motor installed in compatible GE, Hotpoint, RCA, and Americana refrigerators from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
ERWR50X122 Refrigerator Defrost Thermostat
L60-32F. 1/4" side push on clip. 11-3/4" leads with stripped wire ends.
Replaces Part Numbers: WR50X122, 2387, AH303471, AP2071262, EA303471, PS303471, WR50X0122, WR50X0128, WR50X10014, WR50X128
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents Only - Warning: Cancer and Reproductive harm - https://www.p65warnings.ca.gov/
XPARTCO DA82-01415A Refrigerator Water Leak Service Kit
Water leak repair kit with updated internal duck bill.
Fits select Samsung refrigerator models.
Replaces Part Numbers: DA82-01415A, 3436781, AP5957964, PS10058968.
Description: This Water Leak Repair Kit is a replacement part for select Samsung refrigerator models, this field service kit used to address water leakage and excessive frost in bottom freezer or French door refrigerators with dual evaporators. The kit includes a drain probe, two drain tubes, and two silver foam strips. With these parts, you can prevent excessive frost buildup on the evaporator cover and fix issues like water leaks under the crisper or odd fan noises that stop when the doors are opened.
This is an aftermarket part that can be used as a replacement for the OEM part
809069207 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators
Product Description
Restore powerful and consistent cooling with the 809069207 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved motor circulates cold air throughout the refrigerator and freezer compartments, ensuring even temperature distribution. A failing fan motor can cause warm spots, frost buildup, poor cooling, or unusual noises. Replacing it with this Genuine OEM part ensures dependable performance and the same airflow efficiency your appliance had when new.
Replaces Part Numbers
809069207, PD00064424, EAP12705983, AP6834878, PS12705983.
Compatibility
This Genuine OEM evaporator fan motor fits select Frigidaire, Electrolux, and Kenmore refrigerators.
Example compatible models include (but are not limited to):Frigidaire FFHS2622MB3, FFSS2615TS0, Electrolux EI23CS55GS1, and Kenmore 253.7031321A.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for perfect fit and long-lasting performance
❄️ Restores Air Circulation – Ensures even cooling in fresh food and freezer sections
🔇 Quiet Motor Operation – Balanced OEM motor design lowers noise and vibration
💪 High Durability – Built with premium materials for extended service life
🛡️ Fixes Common Issues – Solves poor cooling, frost buildup, noisy fan, or warm temperatures
📐 Product Specification
Part Number: 809069207
Component Type: Refrigerator Evaporator Fan Motor
Material: Reinforced plastic fan housing with factory motor
Voltage: 115V AC (model dependent)
Mounting: Direct-fit motor mounted behind freezer interior panel
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the refrigerator before servicing to avoid electrical shock.
Steps:
Disconnect power and remove freezer shelves and panels.
Locate the evaporator fan assembly.
Disconnect the wiring harness and remove the old motor.
Install the new 809069207 motor in the same location.
Reassemble interior panels and restore power.
Allow several minutes for airflow to stabilize.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Restore powerful, even cooling — Add to Cart Now for a factory-quality repair!
4890JL1002M Refrigerator Shelf Glass
Compatibility and Part Cross-References
This component is highly cross-compatible and is designed to fit a wide selection of bottom-freezer and standard refrigerators manufactured by LG, including specific models across the LG LFC and LRB series, as well as select Kenmore models (such as the Kenmore 795 series).
Replaces Part Number 4890JL1002M, 1550723, AH3524074, EA3524074, AP5215948, PS3524074.
Part number 4890JL1002M is a genuine, original equipment manufacturer (OEM) refrigerator crisper cover glass shelf made primarily by LG Electronics. It functions as the clear glass insert that sits directly inside the plastic crisper drawer frame, acting as a sturdy, tempered-glass roof for your fruit and vegetable bins while serving as a functional storage shelf above them.
4TM-C12 Refrigerator / Freezer Compressor Overload 1/2 HP
Refrigerator / Freezer Thermal Overload Protector
1/2 HP (375W) - 110V
4TM-C
Replaces Part Numbers: 6750C-0004R, AP4651578, PS3529535, 6750C-0005P, AH3529540, EA3529540, AP4439459, PS3529540.
This is an aftermarket part that can be used as a replacement for the OEM part.
W10861170 Refrigerator Genuine Diffuser
Replaces Part Numbers: W10861170, 4459449, OEM23997962, AP5999490, PS11731574, W10633587.
Description: This air diffuser is an OEM part for select Whirlpool refrigerators. This air diffuser is responsible for evenly distributing cool air throughout the refrigerator compartment.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
5304532557 Refrigerator Genuine Evaporator Motor
Replaces Part Numbers: 5304532557, 242077707, AP7194947, PS16745551.
Description: This Part is a Genuine OEM refrigerator evaporator fan motor compatible with specific Electrolux, Frigidaire refrigerator models. The fan motor is a vital component of your refrigerator. It is designed to maintain cold temperatures by circulating air through the fresh food compartments. By doing so, it ensures uniform cooling within the refrigerator. This helps to prevent warm spots that can lead to frost build-up.
XPARTCO WR60X10307 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X10307 is an aftermarket replacement evaporator fan motor designed to circulate cold air throughout the refrigerator and freezer compartments. Restore efficient cooling with the replacement XPARTCO WR60X10307 Refrigerator Evaporator Fan Motor. This evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, offering a cost-effective alternative to OEM parts.
When the fan motor fails, cold air cannot circulate effectively, leading to warm refrigerator sections, frost buildup, or noisy operation. Replacing the evaporator fan motor restores airflow, improves cooling efficiency, and helps prevent food spoilage.
Quick Answer
The XPARTCO WR60X10307 Evaporator Fan Motor fixes refrigerators that are not cooling properly, have warm fresh food sections, or make unusual buzzing or grinding noises. It restores proper air circulation inside the unit.
Common Problems This Part Fixes
Refrigerator not cooling properly
Freezer cold but fridge section warm
Loud buzzing, humming, or grinding noise
Frost buildup around evaporator coils
Inconsistent temperature between compartments
No airflow from vents
Replaces Part Numbers
This evaporator fan motor replaces the following part numbers:
WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, AGE29301, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select refrigerators from the following brands:
GE refrigerators
Hotpoint refrigerators
Other compatible models using WR60X10307
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Circulates cold air across evaporator coils
Restores proper airflow and temperature balance
Offers OEM-equivalent performance at a lower price.
Reduces noise from worn or failing fan motors
Improves overall cooling efficiency
Direct replacement for WR60X10307 motor, evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor.
Product Specifications
Part Number
XPARTCO WR60X10307
Part Type
Evaporator Fan Motor
Application
Refrigerator / Freezer
Condition
Aftermarket Replacement
Function / Specs
Air Circulation, 9.75V DC, 3.25W
Compatible Brands
GE, Hotpoint
Installation Notes
⚠️ Safety First — Disconnect Power Before Service Unplug the refrigerator before servicing. Access the evaporator fan by removing the rear freezer panel. Disconnect wiring harness and mounting screws, replace the fan motor, and reassemble. Ensure the fan spins freely before restoring power.
Frequently Asked Questions
What does the evaporator fan motor do?
It circulates cold air from the evaporator coils throughout the refrigerator and freezer compartments to maintain even cooling.
Will this fix a warm refrigerator section?
Yes, a failed evaporator fan motor is a common cause of warm fridge sections while the freezer remains cold.
Is this an OEM part?
This is a high-quality aftermarket replacement built to OEM-equivalent standards for reliable performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in high-quality replacement parts. Fast shipping from our U.S. warehouse and expert support available to help verify compatibility.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
W11248040 Washer Console (Control Panel Housing)
Genuine Whirlpool part
Replaces Part Number W11248040, 4845509, W11035013, W11120176, W11192407, PD00087512, EAP12584120, AP6783239, PS12584120.
Model Cross Reference
This part #W11248040 works with all models listed.
Kenmore / Sears
110.27132412
Washer
Kenmore / Sears
110.27132413
Washer
