XPARTCO DC97-15459G Washer Water Valve
The XPARTCO DC97-15459G is an aftermarket replacement water inlet valve assembly compatible with a wide range of Samsung top-load washers. This valve mounts at the rear of the washer and controls the flow of water into the drum, opening electronically when the control board calls for a fill and closing once the target water level is reached. It connects via five terminal connections to the wiring harness and to the hot/cold supply hoses.
When this valve fails, the washer commonly won't fill with water, fills very slowly, overfills, or continues to trickle water even when powered off — the last of which points to a valve that isn't sealing properly rather than an electrical fault. It directly replaces DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861. Sold individually; does not include wire harness or mounting screws. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO DC97-15459G Washer Water Valve fixes Samsung top-load washers that won't fill, fill slowly, overfill, or leak/drip water even when the washer is unplugged. 5-terminal connection for wiring and hot/cold hose lines. Sold individually — wire harness and mounting screws not included. Replaces DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861. Classic symptom: washer trickles water into the drum even when it's completely powered off.
Common Problems This Part Fixes
Washer won't fill with water at all
Washer fills very slowly or takes much longer than normal
Washer overfills or keeps adding water past the normal level
Water trickles or leaks into the drum even when the washer is off
Leaking or dripping at the water inlet connection point
Error code related to water fill or water level on the display
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with a wide range of Samsung top-load washers, including:
Samsung WA45H7200AP/AW, WA48H7400AP/AW, WA48J7770AP/AW
Samsung WA50F9A6/7/8 series, WA50K8600AW, WA50M7450AP/AW
Samsung WA52J8700AP/AW, WA52M7750AV/A4 and related WA52M7750 series
Select Kenmore washers (Samsung-built models)
Note: This valve is sold individually and does not include the wire harness or mounting screws — reuse your existing hardware during installation. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement Samsung washer water inlet valve assembly
Resolves "won't fill," "slow fill," "overfilling," and "leaking when off" symptoms
Electronically controlled valve opens/closes based on control board signal
5-terminal connection for wiring harness and hot/cold hose lines
Replaces DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861
Compatible with a wide range of Samsung top-load washer models
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
XPDC97-15459G
OEM Part Number
DC97-15459G
Part Type
Washer Water Inlet Valve Assembly
Condition
Aftermarket Replacement
Terminals
5-terminal wiring/hose connection
Sold As
Individually (wire harness and screws not included)
Application
Samsung Top-Load Washer Water Supply
Compatible Brands
Samsung, Kenmore
Installation Notes
⚠️ Shut Off Water Supply and Unplug Washer Before Starting Turn off both the hot and cold water supply valves and disconnect power to the washer before beginning. Pull the washer away from the wall for access to the rear panel. Disconnect the hot and cold water supply hoses from the old valve — have a towel ready to catch residual water. Photograph the wiring before disconnecting, then unplug the wire harness connectors from the old valve. Remove the mounting screws holding the valve to the cabinet and remove the old valve. Install the new DC97-15459G valve in the same position using your existing mounting screws (not included with this part) and reconnect the wire harness, matching your photos. Reconnect the hot and cold supply hoses, making sure they're threaded onto the correct ports. Turn the water supply back on and check for leaks at the hose connections before restoring power. Run a test cycle to confirm the washer fills correctly and doesn't leak. Tools needed: adjustable pliers or channel locks (for hose connections), Phillips and flat-head screwdrivers.
Frequently Asked Questions
My washer trickles water into the drum even when it's unplugged — is this the part?
Yes, this is a classic symptom of a water inlet valve that isn't sealing properly. Since the valve is the only thing standing between your home's pressurized water supply and the drum, a valve that won't fully close will let water trickle through even with zero power to the washer. This is different from an electrical fill problem, which typically shows up as the washer not filling at all rather than filling when it shouldn't.
Does this include the wire harness and mounting screws?
No — this valve is sold individually. You'll reuse your existing wire harness connector and mounting screws from the old valve during installation.
Will this fit my Kenmore washer?
This valve fits select Kenmore washers that were built by Samsung and share this platform's water valve design. Confirm your appliance model number before ordering, since not all Kenmore washers use this valve.
Do I need to shut off the water supply to replace this?
Yes — always shut off both the hot and cold water supply valves before disconnecting the hoses from the old valve. Skipping this step will result in water spraying from the open supply lines once the hoses are disconnected.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
AAN73209838 Genuine OEM LG Washer Drain Pump & Cabinet Base Assembly
The AAN73209838 is a genuine LG OEM combined drain pump and cabinet base assembly for LG washers. This assembly bundles the washer's drain pump — which pumps water out of the drum and through the drain hose at the end of each cycle — together with the cabinet base structure it's mounted to. Because these two components ship together as one assembly, replacing this part addresses both the drain pump function and the base structure it sits in at the same time.
Common causes of failure include a worn or jammed drain pump motor, or physical damage or corrosion to the cabinet base itself over years of use. A failing assembly typically shows up as the washer failing to drain, unusual noise during the drain phase, or water leaking from underneath the unit.
Quick Answer
The AAN73209838 Genuine OEM LG Washer Drain Pump & Cabinet Base Assembly fixes LG washers that won't drain, make unusual noise during the drain phase, or are leaking water from underneath the unit. Combined drain pump and cabinet base assembly. This is a larger, heavier assembly than a standalone drain pump — installation involves more disassembly than a simple pump swap.
Common Problems This Part Fixes
Washer not draining — standing water left in the tub after a cycle
Unusual noise during the drain phase of the cycle
Water leaking from underneath the washer
Cycle stalling or failing to advance past the drain step
Visible damage or corrosion to the cabinet base structure
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AAN73209838, 4873470, 4985882, AHA75673401, AP6991753, AP6991765, EAP12580277, EAP16222263, FIX16222263, PS12580277, PS16222263, ALG51685, PD00091778
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This drain pump and cabinet base assembly is compatible with select LG top-load washers, including model numbers such as WT7060CW, WT7100CW, WT7250CW, WT7300CV, T1780WFHT, and T1789EFH5T/T1789EFH5U/T1789EFHT/T1789EFHKD variants.
Note: This is a combined assembly, not a standalone drain pump — if your washer only needs the pump replaced and the cabinet base is intact, ask our support team whether a standalone pump option is available for your model before ordering this larger assembly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified pump and base assembly
Combined drain pump and cabinet base assembly in a single part
Resolves "won't drain," "noisy drain phase," and "leaking underneath the washer" symptoms
Direct drop-in replacement — matches the original mounting and hose connections
Compatible with a range of LG top-load washer models
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AAN73209838
Part Type
Washer Drain Pump & Cabinet Base Assembly
Condition
Genuine OEM
Brand
LG
Application
Top-Load Washers
Function
Pumps water from the drum through the drain hose; provides the cabinet base structure
Repair Difficulty
Moderate to Hard — larger assembly than a standalone pump
Quantity
1 combined assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Remove Standing Water First Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. If there's standing water left in the tub from the original failure, remove as much as possible by hand with a cup or towel before starting the repair. Because this is a combined pump and cabinet base assembly rather than a standalone pump, access typically requires tipping the washer back or removing more of the cabinet than a simple pump swap — check your model's service diagram for the exact disassembly sequence, since it varies by model. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the drain hose connections from the old assembly, remove the fasteners securing it to the washer frame, and carefully remove it, noting how the base supports the rest of the cabinet. Install the new AAN73209838 assembly in the same position, reconnect the drain hose connections securely, reconnect the electrical connector fully, and secure all mounting fasteners. Reassemble the cabinet in reverse order, restore the water supply and power, then run a cycle and check underneath for leaks while confirming the tub drains completely at the end. Tools needed: Phillips screwdriver, socket set, pliers, towels or a small cup for removing standing water, work gloves.
Frequently Asked Questions
Do I need this whole assembly, or is there a smaller drain pump option for my model?
Some LG washer models offer a standalone drain pump as a separate, smaller part, while others require this combined pump-and-base assembly because the two are integrated on that particular platform. Check with our support team using your model number to confirm whether a standalone pump is available for your washer before ordering this larger assembly, since it can save you time and cost if a smaller part fits your model.
Why is this repair more involved than a typical drain pump replacement?
Because this part includes the cabinet base structure along with the pump, accessing and replacing it typically involves more disassembly than swapping a standalone pump alone — you're not just disconnecting a pump, you're also working with part of the washer's supporting frame. Budget more time for this repair than you would for a simple pump-only replacement, and consider having a second person help support the cabinet during removal and installation.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original pump design, hose connections, and cabinet base mounting configuration of the assembly originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5304528029 Washer Water Valve
Dispenser Valve Gaskets are Not Included
Washer water inlet valve.
5 Solenoid Coils, 5 Outlets
Fits Specific Electrolux, Frigidaire front load washer models.
Replaces Part Numbers:5304528029, 5304514790, 5304522534, AP7014477, PS16544354.
Description: This Water Valve is a replacement part for specific Electrolux, Frigidaire washing machine models. This part controls the entry of water into the washer during the wash and rinse cycles. Common causes of a bad valve include mineral deposits from hard water, electrical issues, or general wear and tear over time.
This is an aftermarket part that can be used as a replacement for the OEM part.
WPW10409079 Washer Genuine OEM Drain Pump
Replaces Part Number: WPW10409079, W10409079, 2118648, AP6021043, PS11754363, LP09079.
Description: This Drain Pump is a replacement part for specific Whirlpool top-loading washing machine models. Located near the bottom center of the machine, it actively pumps water out of the washer tub at the end of each cycle. The pump motor spins an impeller chamber to push water through the drain hose and out of the home. Causes of failure include clogging from mineral buildup or fabric fibers within the pumping components. Over time, motor windings experience excess heat and may burn out from consistent drainage cycles. WPW10409079 is the part number for a Whirlpool washer drain pump that removes water from the washer during the drain cycle. It is compatible with many Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models.
XPARTCO W11210459 Washer Water Inlet Valve
The XPARTCO W11210459 is an aftermarket replacement washer water inlet valve assembly compatible with select Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, and Roper top-load washers in the WTW4xxx, WTW5xxx, MVWC4xx, MVWC5xx, NTW, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the washer that controls the flow of water from the household supply lines into the washer tub. When the control board calls for water during a fill or rinse cycle, it energizes the valve's solenoid coil to open the valve and allow water to flow in. When the correct water level is reached, the solenoid de-energizes and the valve closes.
When the water inlet valve fails, the washer may not fill with water at all, fill too slowly, fill with an incorrect temperature, overfill, or drip water into the tub when it should be closed. This valve assembly directly replaces W10701459, W10838319, W10869799, W11025984, W11038711, W11210459VP, AP6329217, and PS12349267. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO W11210459 Washer Water Inlet Valve fixes Whirlpool-family top-load washers that won't fill, fill slowly, fill with the wrong water temperature, overfill, or drip water into the tub between cycles. Compatible with Whirlpool WTW4xxx/WTW5xxx, Maytag MVWC4xx/MVWC5xx, Kenmore, Amana NTW, Crosley, Inglis, and Roper top-load washers. Replaces W10701459, W10838319, W10869799, W11025984, W11038711, AP6329217, PS12349267.
Common Problems This Part Fixes
Washer not filling with water at all when a cycle is started
Washer filling very slowly — taking much longer than normal to reach the correct water level
Washer filling with only cold water on a warm or hot cycle — or only hot on a cold cycle
Washer overfilling or filling continuously — valve stuck open
Water dripping or trickling into the tub when the washer is not running
Water leaking from the back of the washer near the valve body
Washer not advancing past the fill portion of the cycle
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11210459, W10701459, W10838319, W11038711, 4591321, W10869799, W11025984, 33190189, 33190190, W10423122, W10423124, AWP43369, PD00042885, EAP12349267, AP6329217, PS12349267.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select top-load washers from the following brands and series:
Whirlpool top-load washers — WTW4616, WTW4715, WTW4810, WTW4815, WTW4816, WTW4850, WTW4855, WTW4915, WTW4950, WTW4955, WTW5000 series and related models
Maytag top-load washers — MVWC215, MVWC415, MVWC416, MVWC465, MVWC555 series and related models
Kenmore / Sears top-load washers — 110 series (Whirlpool-built models)
Amana top-load washers — NTW4516, NTW4655 series and related models
Crosley top-load washers (select models)
Inglis top-load washers (select models)
Roper top-load washers (select models)
Note: Always verify your exact model number before ordering. The W11210459 is a specific-fit valve — not universal. Contact our support team if you need confirmation before ordering.
Key Features
Solenoid-operated valve — opens and closes on command from the control board to deliver the correct amount of hot and cold water during wash and rinse cycles
Complete valve assembly — direct plug-in replacement for compatible models
Resolves not-filling, slow-filling, wrong-temperature, overfill, and drip-when-off symptoms
Replaces W10701459, W10838319, W10869799, W11025984, W11038711, and AP6329217
Compatible with Whirlpool WTW4xxx/WTW5xxx, Maytag MVWC series, Amana NTW series, Kenmore 110 series, Crosley, Inglis, and Roper top-load washers
Top-load washer application — not for Whirlpool front-load models
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
W11210459
Part Type
Washer Water Inlet Valve Assembly
Condition
Aftermarket Replacement
Application
Top-Load Washers
Valve Type
Solenoid-operated water inlet valve
Compatible Series
WTW4xxx, WTW5xxx, MVWC4xx, MVWC5xx, NTW, Kenmore 110
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off both the hot and cold water supply valves before beginning. Pull the washer away from the wall to access the back panel. The water inlet valve is mounted on the upper rear of the washer — the external supply hoses connect to the inlet ports and internal hoses route water into the tub. Photograph all wire harness connections and hose routing before disconnecting anything. Use pliers to loosen the hose clamps and disconnect the internal hoses. Unscrew the mounting screws holding the valve to the washer cabinet and disconnect the wire harness. Remove the old valve and install the new W11210459 in the same position. Reconnect the wire harness, internal hoses with clamps, and mounting screws. Reconnect the external supply hoses, restore water and power, then run a fill cycle and check for leaks. Tools needed: Phillips screwdriver, pliers.
Frequently Asked Questions
What is the difference between the W11210459 and the W10683603 water inlet valves?
Both are Whirlpool-platform top-load washer water inlet valves, but they are different assemblies for different model generations and are not interchangeable. The W10683603 (WPW10683603) is a larger dual-valve assembly with an integrated thermistor and vacuum break, used on older Whirlpool-family top-load models. The W11210459 is a newer valve assembly used on more recent Whirlpool WTW4xxx/WTW5xxx and Maytag MVWC series top-load washers. Always use your specific model number to confirm which valve is correct for your washer before ordering.
How do I know if the water inlet valve has failed?
Common signs of a failed water inlet valve are the washer not filling with water, filling very slowly, filling only on one temperature setting, overfilling, or water dripping into the tub when the washer is off. You can test the valve's solenoid coils with a multimeter — each coil should show a resistance reading (typically 200–500 ohms) rather than open circuit. A coil reading open circuit has failed. Before testing the valve, check that the household water supply is fully open, the fill hoses are not kinked, and the inlet screens inside the valve ports are not clogged with mineral deposits.
What are the small screens inside the valve inlet ports for?
The small mesh screens inside the hot and cold water inlet ports of the valve are sediment filters that prevent mineral deposits and debris from the household water supply from reaching the valve seats and solenoid mechanisms. Over time — especially in areas with hard water — these screens can become clogged with mineral buildup and restrict water flow, causing the same slow-fill symptoms as a failed valve. Before replacing the valve, remove and inspect the inlet screens. If they are clogged, clean them with a soft brush and white vinegar or replace them. If cleaning the screens does not restore normal fill speed, the valve itself needs replacement.
My washer fills with only cold water — is the water inlet valve the cause?
Filling with only cold water when a warm or hot cycle is selected usually points to the hot water solenoid coil having failed. Each solenoid controls one temperature port independently — a failed hot coil means only the cold port opens. Test both solenoid coils with a multimeter as described above. Also check that your household hot water supply valve is fully open and that hot water is reaching the back of the washer in the supply hose before assuming the valve has failed.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the specifications and performance of the original W11210459 water inlet valve assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WP697772 Dryer Blower Wheel
The WP697772 is a genuine OEM blower wheel from Whirlpool for Whirlpool-built dryers and washer-dryer combos sold under the Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral names. The blower wheel attaches to the drive motor shaft and moves air over the heat source, through the drum, and out the exhaust vent. When the wheel wears, cracks, loses a fin, or comes loose on the shaft, the dryer gets noisy and airflow drops, so clothes take longer to dry.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and balance match the original. If your dryer is only noisy, check the blower for lint buildup first, since a clogged wheel can sound like a failing one.
Quick Answer
The Genuine OEM WP697772 Blower Wheel fixes a Whirlpool-built dryer that is noisy, has weak airflow, or takes too long to dry because the blower wheel is worn, cracked, or damaged. Genuine OEM from Whirlpool. Classic symptom: a rattling, thumping, or squealing noise from the back of the dryer, with damp clothes at the end of a normal cycle.
Common Problems This Part Fixes
Dryer noisy, with rattling or thumping from the blower area
Weak airflow, or clothes taking too long to dry
Visibly cracked, chipped, or broken blower fins
Blower wheel loose or slipping on the motor shaft
Wheel worn out over time
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This blower wheel replaces the following part numbers:
WP697772, WPW10211915, 697772, W10211915, 687613, AP6010627, AWP48289,EAP11743811, FIX11743811, OEM18031890, PD00003053, PS11743811
These are Whirlpool's un-prefixed and earlier numbers for this blower wheel. If your old wheel or parts diagram shows any of them, match against this list.
Compatibility
This blower wheel is listed for dryers and washer-dryer combos from:
Whirlpool, including CEE2760KQ0, WED9470WW1, and WED9400ST1
Kenmore, including 11060052990, 11060056990, and 10687884100
Maytag, including YMEDX700XL0 and MGDX700AG0
KitchenAid, Amana, Crosley, Inglis, and Admiral
Note: The model list above is only a sample, since this wheel fits many more models. Confirm fit by matching the number on your old wheel or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM Whirlpool blower wheel, not an aftermarket equivalent
Restores quiet, full airflow through the drum and exhaust
Fits select Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral dryers and combos
Straightforward replacement, typically 15–60 minutes with hand tools
Product Specifications
Part Number
WP697772
OEM Part Number
WP697772
Part Type
Dryer Blower Wheel
Condition
Genuine OEM
Manufacturer
Whirlpool
Application
Select Whirlpool-Family Dryers & Washer-Dryer Combos
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker, and shut off the gas supply first if it's a gas model. Wear work gloves. Following your model's service guide, remove the front cover to reach the blower housing, then the back cover to access the motor shaft. Hold the motor shaft steady while you unscrew the retaining nut and pull off the old wheel. Reviewers report that the nut is left-hand threaded on these dryers, so check the thread direction before forcing it. Thread the new wheel on while holding the shaft, tighten it, and replace the covers. Clean the blower housing and exhaust duct of lint while you have the dryer open, and inspect the new wheel on arrival for damage.
Frequently Asked Questions
My dryer is noisy. Is this the part I need?
Possibly. Before replacing the wheel, check whether it is clogged with lint, which can cause noise and imbalance. If the wheel is clean but cracked, chipped, or loose on the shaft, replace it. Also check the drum rollers and idler pulley, which can make similar sounds.
Is the nut on the shaft left-hand threaded?
Reviewers report that it is on these dryers, so turn it the opposite way to a normal nut when removing the old wheel. Check on your dryer before applying force.
My old wheel is marked 697772 or W10211915. Will this work?
Yes. Both numbers are on the Replaces list. If you're unsure, contact our support team with your model number and we'll confirm.
Is this a genuine Whirlpool part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM W11399437 Washer Drain Pump Assembly
The Genuine OEM Whirlpool W11399437 is the drain pump assembly for select Whirlpool and Maytag washers. It pumps the water out of the washer during the drain stage of the cycle. When the pump fails or clogs, the washer may not drain properly, leave water in the drum, or stop partway through a cycle.
This is the original Whirlpool part, not an aftermarket equivalent. It is sold as an assembly, which may include more than one component, so check the parts diagram for your model to confirm what comes with it. Check your model number before ordering.
Quick Answer
The Genuine OEM W11399437 Washer Drain Pump Assembly replaces a failed or clogged drain pump on a compatible Whirlpool or Maytag washer. Replaces W11259498. Classic symptoms: the washer won't drain, leaves water in the drum, or stops mid-cycle.
When To Replace This Part
Washer won't drain or leaves water in the drum
Washer stops or won't advance after the wash cycle
Drain pump is noisy, leaking or seized
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump assembly replaces or supersedes the following part numbers:
W11399437 replaces W11259498, AP6974144, 10minON50minOFF, Hanyu B25-3A04, AWP44240, EAP12731241, PD00058225, PS12731241
If your old pump shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This drain pump assembly is listed for select Whirlpool and Maytag washers, including these examples:
Maytag MVW6200KW1, MVW6200KW2, MVW4505MW1, MVW4505MW2
Maytag MVW6230RHW2, MVW6230RHW3, MVW6230HW3
Maytag MVW5035MW1, MVW6500MW0, MVWC565FW3
Note: The models above are a sample, not a full list. Whirlpool uses other drain pumps on other washers, so check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool part, not an aftermarket equivalent
Drain pump assembly that removes water during the drain stage
Replaces the earlier W11259498 part number
Sold individually
Product Specifications
Part Number
W11399437
OEM Part Number
W11399437
Part Type
Washer Drain Pump Assembly
Condition
Genuine OEM
Manufacturer
Whirlpool
Quantity
1 Assembly
Application
Select Whirlpool and Maytag Washers
Installation Notes
⚠️ Unplug The Washer And Drain Remaining Water Unplug the washer and shut off the water supply before you start. Water can remain in the pump and hoses, so have towels and a shallow pan ready. Take a photo of the wiring and hose connections before disconnecting anything, then transfer them to the new pump in the same positions and secure the clamps. If the washer still won't drain, check the drain hose and filter for a clog, and the wiring and control board.
Frequently Asked Questions
My washer won't drain. Is the pump the fix?
Often, but not always. A clogged drain hose or filter, a kinked hose, or a wiring or control problem can cause the same symptom, so check those before replacing the pump.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent.
What comes in the assembly?
It is a drain pump assembly and may include more than one part. Check the parts diagram for your model, or contact our support team and we'll confirm before you order.
Will this fit my washer?
It is listed for many Whirlpool and Maytag washers, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 285753A Washer Direct Drive Motor Coupler
The XPARTCO 285753A is an aftermarket replacement direct drive motor coupler (also called a motor coupling or drive coupler) compatible with a wide range of Whirlpool-family top-load washers including Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The motor coupler connects the drive motor shaft to the transmission — transferring the motor's power to the transmission to drive the agitator and spin the drum during wash and spin cycles. It is a deliberate weak point in the drivetrain: if the washer is overloaded, the coupler breaks apart first, protecting the far more expensive motor and transmission from damage.
This is the updated 285753A design with metal sleeves for added strength — it replaces all previous coupler styles and versions including the original 285753, 280152, 285743, and 285140. This kit includes 2 plastic coupling halves and 1 rubber isolation dampener. Dimensions approximately 2" L x 1-1/4" W x 2" H. Fits direct-drive top-load washers only — not compatible with belt-drive machines. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 285753A Washer Motor Coupler fixes top-load washers that fill and drain normally but will not agitate or spin. The motor coupler connects the motor to the transmission — when it breaks, the motor runs but neither the agitator nor the drum moves. Kit includes 2 plastic coupling halves and 1 rubber dampener. Updated design with metal sleeves. Replaces all previous coupler versions including 285753, 280152, 285743, 285140. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, and more direct-drive top-load washers.
Common Problems This Part Fixes
Washer fills with water and drains but will not agitate or spin
Motor runs (you can hear it) but agitator and drum do not move
Washer spins slowly or incompletely — clothes still very wet after spin cycle
Loud humming or buzzing from the motor area without agitation or spin
Burning rubber or plastic smell during the wash or spin cycle
Washer shakes excessively — broken coupler causing uneven power transfer
Broken plastic or rubber pieces visible inside the bottom of the washer cabinet
Replaces Part Numbers
This motor coupler directly replaces the following OEM and cross-reference part numbers:
285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AWP39583, PD00002353, AH1485646, EAP1485646, EA1485646, TJ285753, ER285753, AP3963893, PS1485646.
The 285753A replaces all previous motor coupler styles and versions. If your parts diagram shows any of the older numbers above, the 285753A is the correct current replacement.
Compatibility
This motor coupler is compatible with select direct-drive top-load washers from the following brands:
Whirlpool top-load washers (direct drive — no belt)
Kenmore / Sears top-load washers — 70 series, 80 series, 90 series, and 110 series (Whirlpool-built)
KitchenAid top-load washers
Maytag top-load washers (direct drive models)
Amana top-load washers
Roper top-load washers
Admiral top-load washers
Estate top-load washers
Crosley top-load washers
Inglis top-load washers
Magic Chef top-load washers
Important: The 285753A is for direct-drive top-load washers only — machines where the motor connects directly to the transmission without a belt. It is not compatible with front-load washers or older belt-drive top-load washers. If you can see a drive belt inside your washer cabinet, this is not the correct part.
Key Features
Connects the drive motor shaft to the transmission — transfers motor power to drive the agitator and spin drum
Intentional sacrificial part — designed to break before the motor or transmission during overload, saving far more expensive components
Updated 285753A design with metal sleeves — stronger than original all-plastic versions; replaces all previous coupler styles
Kit includes 2 plastic coupling halves and 1 rubber isolation dampener — complete assembly
Dimensions: approximately 2" L x 1-1/4" W x 2" H
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef direct-drive washers
Replaces all previous coupler versions including 285753, 280152, 285743, and 285140
Aftermarket replacement built to OEM-equivalent quality standards
Cost-effective DIY repair — typically under $15 and 30–45 minutes of work
Product Specifications
Part Number
285753A
Part Type
Washer Direct Drive Motor Coupler (Motor Coupling Kit)
Condition
Aftermarket Replacement
Application
Direct-Drive Top-Load Washers (no belt)
Dimensions
Approx. 2" L x 1-1/4" W x 2" H
Color
Black / Off-White
Material
Rubber / Plastic / Metal (metal sleeve inserts)
Kit Includes
2 plastic coupling halves, 1 rubber isolation dampener
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Remove the washer's cabinet by releasing the top panel clips and removing the front panel screws — the motor and transmission are at the bottom of the machine. The motor coupler is a three-piece assembly between the motor shaft and the transmission input shaft. Pull the motor forward to release it from the mounting clips. The broken coupler pieces will likely fall out at this point — inspect the motor shaft and transmission shaft for any remaining plastic debris and clear it. Press the new rubber dampener onto the motor shaft coupling half first, then onto the transmission shaft coupling half, and snap the motor back into the mounting clips. Verify both coupler halves are seated securely and the rubber dampener is centered between them. Reassemble the front panel and top panel. Restore power and run a short cycle to confirm the agitator and spin function normally. Work gloves recommended — sharp sheet metal edges inside the cabinet. Tools needed: Phillips screwdriver, 1/4" nut driver, flat-head screwdriver, work gloves.
Frequently Asked Questions
What does the motor coupler do?
The motor coupler is a three-piece assembly — two plastic coupling halves and a rubber dampener — that connects the drive motor shaft to the transmission input shaft in direct-drive washing machines. The motor spins the coupler, which transfers that rotation to the transmission, which in turn drives the agitator and drum. The rubber dampener absorbs shock and vibration between the rigid motor and transmission shafts during direction changes. The coupler is intentionally designed as the weakest link in the drivetrain — if the washer is overloaded or the transmission seizes, the coupler breaks first to protect the far more expensive motor and transmission from damage.
My washer fills and drains but won't agitate or spin — is the motor coupler the cause?
Yes — this is the classic symptom of a broken motor coupler. Because the pump is typically driven directly by the motor before the coupler connection, a broken coupler allows the motor to run and the pump to drain normally, but neither the agitator nor the spin drum receives any power. If you can hear the motor running but nothing moves, open the washer cabinet and inspect the coupler — you will likely find broken plastic pieces at the bottom of the cabinet near the motor and transmission.
Why does the motor coupler break?
The most common cause is overloading — packing too many heavy items into the washer creates enough mechanical resistance that the coupler snaps rather than allowing the motor to be damaged. Other causes include a worn or seized transmission, a worn motor, normal wear over many years of use, or a single sudden jam caused by a foreign object. If your coupler breaks a second time shortly after replacement, inspect the transmission for signs of wear or binding — a stiff or seized transmission will continue to break new couplers.
What is the difference between 285753 and 285753A?
The 285753A is the updated current version that superseded the original 285753. The A version incorporates metal sleeve inserts in the plastic coupling halves for improved strength and durability compared to the original all-plastic design. The 285753A replaces all previous versions — including 285753, 280152, 285743, and 285140 — and is the correct part to order regardless of which older number is listed in your washer's parts diagram.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and performance of the original 285753A motor coupler.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WP3347288 Washer Lower Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP3347288, 3347288, 3348245, 3352107, 519233, AP6008022, PS11741151.
Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.
DC66-00777A Washer Genuine OEM Pulsator Cap – Compatible with Samsung Washers
Product Description
Keep your washer performing like new with the DC66-00777A Washer Genuine OEM Pulsator Cap. This factory-approved cap covers the central bolt on the pulsator (washplate), preventing water, detergent, and debris from entering the hub assembly. A missing or cracked cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this Genuine OEM part ensures a perfect fit, watertight seal, and long-lasting protection.
Replaces Part Numbers
DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312.
Compatibility
This Genuine OEM pulsator cap fits select Samsung top-load washers.
Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, WA45H7000AW/A2, and WA50M7450AW/A4.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-approved part ensures perfect fit and reliable performance
💧 Protective Design – Seals the washplate bolt area to prevent leaks and corrosion
🔇 Reduces Noise – Helps maintain balanced, quiet spin cycles
🛠️ Tool-Free Installation – Snaps securely into place in seconds
🛡️ Fixes Common Issues – Replaces missing, cracked, or leaking pulsator caps
📐 Product Specification
Part Number: DC66-00777A
Component Type: Washer Pulsator (Washplate) Cap
Material: High-grade molded plastic
Color: Silver or gray finish (varies by model)
Mounting: Snap-fit installation over pulsator bolt
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Always unplug the washer before performing any maintenance to prevent electrical shock.
Steps:
Open the washer lid and locate the pulsator (washplate) center.
Remove any old or damaged cap remnants.
Align the new DC66-00777A cap with the bolt opening.
Press firmly until it clicks securely into place.
Close the lid and test the washer.
⏱️ Time Required: Less than 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Protect your washer from moisture and debris — Add to Cart Now for a perfect, factory-quality fit!
Genuine OEM WH23X10043 Washer Drain Pump
The WH23X10043 is a genuine OEM drain pump from GE for GE and Hotpoint washers. The drain pump pushes wash water out of the tub and through the drain hose during the drain portion of the cycle. When it clogs, wears out, or leaks, the washer may leave water in the drum, stop before the spin, throw drain-related problems, leak from the pump, or make unusual noise while draining.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and operation match the original pump. It is a straightforward repair for most owners, usually under an hour, with a nutdriver, pliers and screwdrivers.
Quick Answer
The Genuine OEM WH23X10043 Drain Pump fixes a GE or Hotpoint washer that won't drain, leaves water in the drum, drains slowly, leaks from the pump, or makes noise while draining because the pump has failed. Genuine OEM from GE Appliances. Classic symptom: the cycle stalls with water still in the tub, or you hear the pump hum or grind but the water doesn't leave.
Common Problems This Part Fixes
Washer won't drain, or water is left in the drum after the cycle
Slow or incomplete draining
Water leaking from the pump
Unusual noise while the washer drains
Cycle stopping before the spin because the water hasn't drained
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump is listed under the following part number:
WH23X10043, 2754597, DP035-043, AGE26084, AP5632594, EAP3654194, PD00023322, PS3654194
We have not found any superseded or alternate manufacturer numbers for this pump. If your old pump or parts diagram shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This drain pump is listed for washers from:
GE, including GBAN2800F0WW, GCWN4950D0WS, GHWN4250D0WW, GLWN5550D0WW, GMAN4250F0WS, and GTWN5650F2WS
Hotpoint, including HTAP1200D1WW and MTAP1200D0WW
Note: The model list above is only a sample, since retailers list 100 or more compatible models. Confirm fit by matching the number on your old pump or your parts diagram, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM GE washer drain pump, not an aftermarket equivalent
Restores full draining so cycles finish and the washer can spin
Fits a wide range of GE and Hotpoint washers
Simple replacement, typically under an hour with basic hand tools
Product Specifications
Part Number
WH23X10043
OEM Part Number
WH23X10043
Part Type
Washer Drain Pump
Condition
Genuine OEM
Manufacturer
GE Appliances
Approx. Size
About 9 in H x 6 in L x 4 in Thick
Application
Select GE & Hotpoint Washers
Installation Notes
⚠️ Unplug Power and Expect Water Unplug the washer and turn off the water supply before starting. Work gloves are recommended. Put towels and a shallow pan under the work area, since some water will remain in the pump and hoses. Following your model's service guide, remove the panel needed to reach the pump, disconnect its wiring connector, and loosen the clamps holding the hoses. Pull the hoses off, remove the pump's mounting fasteners, and take out the old pump. Install the new pump in the same position, reattach the hoses with their clamps (replace worn clamps if needed), and reconnect the wiring. Replace the panel, restore power and water, and run a drain cycle while checking for leaks. Reviewers note the hose clamps can be difficult, so have pliers ready.
Frequently Asked Questions
My washer won't drain. Is this the part I need?
A failed or clogged drain pump is a common cause. Before replacing it, check the drain hose and the pump for a clog from a sock, coin, or lint. If the path is clear but the pump hums, grinds, leaks, or doesn't run, replacing it should fix the problem.
Will this fit my GE or Hotpoint washer?
It is listed for a wide range of GE and Hotpoint washers. Match the number on your old pump or parts diagram, or contact our support team with your model number and we'll confirm fit before you order.
Do I need special tools?
No. A nutdriver, pliers, and screwdrivers are typically all you need. Pliers help with the hose clamps.
Is this a genuine GE part?
Yes. This is a genuine OEM part from GE Appliances, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
