Genuine OEM WH23X10043 Washer Drain Pump
The WH23X10043 is a genuine OEM drain pump from GE for GE and Hotpoint washers. The drain pump pushes wash water out of the tub and through the drain hose during the drain portion of the cycle. When it clogs, wears out, or leaks, the washer may leave water in the drum, stop before the spin, throw drain-related problems, leak from the pump, or make unusual noise while draining.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and operation match the original pump. It is a straightforward repair for most owners, usually under an hour, with a nutdriver, pliers and screwdrivers.
Quick Answer
The Genuine OEM WH23X10043 Drain Pump fixes a GE or Hotpoint washer that won't drain, leaves water in the drum, drains slowly, leaks from the pump, or makes noise while draining because the pump has failed. Genuine OEM from GE Appliances. Classic symptom: the cycle stalls with water still in the tub, or you hear the pump hum or grind but the water doesn't leave.
Common Problems This Part Fixes
Washer won't drain, or water is left in the drum after the cycle
Slow or incomplete draining
Water leaking from the pump
Unusual noise while the washer drains
Cycle stopping before the spin because the water hasn't drained
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump is listed under the following part number:
WH23X10043, 2754597, DP035-043, AGE26084, AP5632594, EAP3654194, PD00023322, PS3654194
We have not found any superseded or alternate manufacturer numbers for this pump. If your old pump or parts diagram shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This drain pump is listed for washers from:
GE, including GBAN2800F0WW, GCWN4950D0WS, GHWN4250D0WW, GLWN5550D0WW, GMAN4250F0WS, and GTWN5650F2WS
Hotpoint, including HTAP1200D1WW and MTAP1200D0WW
Note: The model list above is only a sample, since retailers list 100 or more compatible models. Confirm fit by matching the number on your old pump or your parts diagram, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM GE washer drain pump, not an aftermarket equivalent
Restores full draining so cycles finish and the washer can spin
Fits a wide range of GE and Hotpoint washers
Simple replacement, typically under an hour with basic hand tools
Product Specifications
Part Number
WH23X10043
OEM Part Number
WH23X10043
Part Type
Washer Drain Pump
Condition
Genuine OEM
Manufacturer
GE Appliances
Approx. Size
About 9 in H x 6 in L x 4 in Thick
Application
Select GE & Hotpoint Washers
Installation Notes
⚠️ Unplug Power and Expect Water Unplug the washer and turn off the water supply before starting. Work gloves are recommended. Put towels and a shallow pan under the work area, since some water will remain in the pump and hoses. Following your model's service guide, remove the panel needed to reach the pump, disconnect its wiring connector, and loosen the clamps holding the hoses. Pull the hoses off, remove the pump's mounting fasteners, and take out the old pump. Install the new pump in the same position, reattach the hoses with their clamps (replace worn clamps if needed), and reconnect the wiring. Replace the panel, restore power and water, and run a drain cycle while checking for leaks. Reviewers note the hose clamps can be difficult, so have pliers ready.
Frequently Asked Questions
My washer won't drain. Is this the part I need?
A failed or clogged drain pump is a common cause. Before replacing it, check the drain hose and the pump for a clog from a sock, coin, or lint. If the path is clear but the pump hums, grinds, leaks, or doesn't run, replacing it should fix the problem.
Will this fit my GE or Hotpoint washer?
It is listed for a wide range of GE and Hotpoint washers. Match the number on your old pump or parts diagram, or contact our support team with your model number and we'll confirm fit before you order.
Do I need special tools?
No. A nutdriver, pliers, and screwdrivers are typically all you need. Pliers help with the hose clamps.
Is this a genuine GE part?
Yes. This is a genuine OEM part from GE Appliances, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WPW10730972 Washer Drain Pump
The Genuine OEM Whirlpool WPW10730972 is the drain pump assembly for select Whirlpool, Maytag, Kenmore and Inglis washers. The pump removes water from the washer during the drain portion of the cycle. It has two ports and includes a removable filter. When it fails, the washer may not drain or may leak.
This is the original Whirlpool part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering.
Quick Answer
The Genuine OEM WPW10730972 Drain Pump replaces the drain pump on a compatible washer when it has failed. Replaces W10730972, W10130913, W10117829, W10183434, W10190647, W10190648, W10201457, 8540024, 8540025, 8540027, 8540028 and 8540996. Classic symptoms: the washer won't drain, or water leaks from the pump area.
Common Problems This Part Fixes
Washer won't drain
Water draining slowly or poorly
Leaking from the pump
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump replaces or supersedes the following part numbers:
WPW10730972, W10730972, W10130913, 8540024, 8540025, 8540027, 8540028, 8540996, W10117829, W10183434, W10190647, W10190648, W10201457, WPW10730972VP, B40-3A01, AP6023956, AWP50633, EAP11757304, PD00025949, PS11757304
If your old pump shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This drain pump is listed for Whirlpool, Maytag, Kenmore and Inglis washers, including these examples:
Whirlpool WFW9200SQ10, WFW9400SWA10, WFW8500SR00, CET8000AQ1, CGT9000GQ0
Maytag MHWZ400TQ00, MLE20PDAZW0, MLG20PDCWW0
Kenmore 11046462501, 11047512601, 11047542603
Note: The models above are a sample of a much longer list, not a full list. Some models list the pump as an optional part, not one included with the washer. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool part, not an aftermarket equivalent
Complete drain pump assembly with a removable filter
Replaces twelve earlier Whirlpool pump part numbers
Sold individually
Product Specifications
Part Number
WPW10730972
OEM Part Number
WPW10730972
Part Type
Washer Drain Pump
Condition
Genuine OEM
Manufacturer
Whirlpool
Quantity
1 Pump
Application
Select Whirlpool, Maytag, Kenmore and Inglis Washers
Installation Notes
⚠️ Disconnect Power Before Installing Unplug the washer and wear work gloves. Remove the bottom front panel, and have a pan ready to catch the water left in the pump and hoses. Release the hose clamps with pliers, disconnect the hoses and the electrical connector, then remove the two mounting nuts or screws and slide the old pump out. Install the new pump, reconnect the hoses and wiring, and run a rinse cycle to check for leaks before you replace the panel.
Frequently Asked Questions
My washer won't drain. Is this the part I need?
It can be. Owners often find coins, hairpins and other small objects in the pump, so check the trap and pump for debris first. If the impeller has broken or the pump is noisy or hot to the touch, replace the pump.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent.
Is the filter sold separately?
No. The filter is part of the pump, so you replace the whole assembly if the filter needs replacing.
Will this fit my washer?
It is listed for many Whirlpool-built models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH49X27322 Washer Transmission Platform Assembly Kit
The Genuine OEM GE WH49X27322 is the transmission platform assembly and nut kit for select GE washer-dryer combo units. The platform supports the transmission and keeps it aligned with the drum. When it wears, cracks or shifts out of alignment, the unit can make clunking or grinding noises during the spin cycle or vibrate heavily.
This is the original GE part, not an aftermarket equivalent. It is sold as a kit. Check your model number before ordering.
Quick Answer
The Genuine OEM WH49X27322 Transmission Platform Assembly Kit replaces the transmission platform and nut on a compatible GE washer-dryer combo when the platform has worn or failed. Classic symptoms: loud clunking or grinding during the spin cycle, or excessive vibration.
Common Problems This Part Fixes
Loud clunking or grinding noise during the spin cycle
Excessive vibration or shaking
Worn, cracked or misaligned transmission platform
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This transmission platform kit is listed under the following part number:
WH49X27322, 4588460, AGE26889, AP6328404, EAP12343556, PD00053354, PS12343556
If your old platform shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This kit is listed for GE washer-dryer combo units, including these examples:
GE GUD24ESSM0WW, GUD24ESSM1WW, GUD24GSSM0WW, GUD24GSSM1WW
GE GUD27ESSM0WW, GUD27ESSM1WW, GUD27GSSM0WW, GUD27GSSM1WW, GUD27ESPM0DG, GUD27GSPM0DG
GE GUV27ESSM0WW, GUV27ESSM1WW, XUD27ESSM0WW, XUD27GSSM0WW
Note: The models above are a sample of 27 that retailers list, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Transmission platform assembly and nut kit
Supports the transmission and keeps it aligned with the drum
Sold as a kit
Product Specifications
Part Number
WH49X27322
OEM Part Number
WH49X27322
Part Type
Washer Transmission Platform Assembly Kit
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Kit
Application
Select GE Washer-Dryer Combos
Installation Notes
⚠️ Disconnect Power And Water Before Installing Unplug the unit and turn off the water supply before you begin. This repair involves the transmission area and is best done with a second person and your model's service guide. Remove the cabinet panels to reach the transmission, remove the screws holding the old platform, install the new platform with the drum and transmission aligned, and secure it with the nut and screws. Reassemble, restore power and water, and run a test cycle.
Frequently Asked Questions
My unit clunks or grinds on spin. Is this the part I need?
It can be. A worn or cracked platform can cause noise and vibration, but worn bearings, drive parts or a loose load can cause similar symptoms. Confirm the platform is the problem before replacing it.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
What is in the kit?
It is sold as the transmission platform assembly and nut kit. Retailers do not list the exact contents, so contact our support team if you need to confirm them before ordering.
Will this fit my washer-dryer?
It is listed for 27 GE washer-dryer combo models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH01X24378 Washer / Dryer Cycle Selector Knob
The XPARTCO WH01X24378 is an aftermarket replacement cycle selector knob (options knob) compatible with a wide range of GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers. The selector knob is one of the primary user controls on the appliance's control panel — it's what you grip and turn to choose the wash or dry options and settings for each load. On many GE-platform washers and dryers, this smaller selector knob works alongside a larger main timer/cycle knob to give you fine-grained control over the specific options within your selected cycle. Over time, selector knobs wear out from repeated twisting motions, get cracked or dropped, or lose their grip on the internal shaft — all of which make it difficult or impossible to change the appliance's settings.
Constructed from heat-resistant plastic with a clean white and chrome finish. Snap-on installation — no tools required. Pulls straight off the control shaft and pushes back on. This knob directly replaces WH01X24378, AP5986397, 4396548, and PS11726904. Important: this is the smaller cycle selector/options knob. If you need the larger main timer knob for your GE washer, that's a different part number (PS11736611) — check which knob is broken before ordering. Installs in under 1 minute — no tools required.
Quick Answer
The XPARTCO WH01X24378 Washer Cycle Selector Knob replaces a cracked, loose, stripped, or missing selector knob on GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers. Heat-resistant plastic, white and chrome finish. Snap-on installation — pulls straight off, pushes back on. Replaces AP5986397, 4396548, PS11726904. This is the smaller cycle/options knob — NOT the larger main timer knob (PS11736611). No tools required.
Common Problems This Part Fixes
Selector knob cracked, broken, or split from age and repeated use
Knob loose and slipping on the control shaft — no longer changes settings when turned
Knob has stripped or damaged internal grip and won't stay coupled to the shaft
Knob missing entirely from the control panel
Knob damaged from impact — dropped or bumped
Knob discolored, faded, or worn from years of daily handling
Difficulty selecting cycle options — knob no longer clicks into detent positions cleanly
Water or detergent damage to the knob material
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This cycle selector knob directly replaces the following OEM and cross-reference part numbers:
WH01X24378, 4396548, AGE26094, AP5986397, EAP11726904, OEM17959200, PD00037085, PS11726904.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This selector knob is compatible with select washers and dryers from the following brands:
GE washers — GTW500ASNWS and related top-load models
GE dryers — GTX42GASJWW, GTD45GASJ2WS and related models
GE Profile and GE Café washers and dryers (select models)
GE Monogram washers and dryers (select models)
Hotpoint washers and dryers (select models)
RCA washers and dryers (select GE-built models)
Haier washers and dryers (select models using GE-platform controls)
Important — Two Knobs, Two Part Numbers: Many GE washers and dryers have TWO knobs on the control panel: a larger main timer/cycle knob and a smaller cycle selector/options knob. The WH01X24378 is the smaller cycle selector/options knob. If your broken knob is the larger main timer knob, you need a different part number (PS11736611 on many GE models). Before ordering, visually confirm which knob is broken and compare the size and shape to the images. Contact our support team with your model number if you're unsure.
Key Features
Cycle selector/options knob — used to choose specific settings within your selected wash or dry cycle
Snap-on installation — pulls straight off the control shaft, pushes straight back on; no tools or hardware required
Heat-resistant plastic construction — designed for years of daily use without warping or cracking
Clean white and chrome finish complements GE appliance styling
Ergonomic shape for comfortable grip and precise cycle selection
Restores full cycle control when the original knob has cracked, stripped, or gone missing
Replaces WH01X24378, AP5986397, 4396548, and PS11726904
Compatible with GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers
Important: this is the smaller cycle selector/options knob — NOT the larger main timer knob (PS11736611, sold separately)
Aftermarket replacement built to OEM-equivalent quality standards
Quick replacement — installs in under 1 minute
Product Specifications
Part Number
XPWH01X24378
Part Type
Washer/Dryer Cycle Selector Knob (Options Knob)
Condition
Aftermarket Replacement
Application
Washers and Dryers (GE platform)
Knob Size
Smaller cycle/options knob (NOT the larger main timer knob)
Color
White / Chrome
Material
Heat-resistant plastic
Installation
Snap-on — no tools required
Larger Timer Knob
Different part — PS11736611 (sold separately)
Compatible Brands
GE, Hotpoint, RCA, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Washer/Dryer Before Starting — Quick Toolless Replacement Disconnect power before beginning as a general safety precaution. Wear work gloves if desired. Locate the old cycle selector knob on the control panel of your washer or dryer. Grip the knob firmly and pull it straight off the control shaft — it should come off with a moderate pull (no tools or hardware required). If the knob is stuck or the internal grip has stripped and it's spinning without releasing, use a soft cloth wrapped around it for better grip, or gently pry it off with a plastic tool (avoid metal tools that could damage the control panel finish). Once the old knob is off, inspect the metal or plastic control shaft — if it's damaged, worn round, or spinning freely with no resistance, the underlying switch or shaft may also need replacement. If the shaft is intact, align the new WH01X24378 knob with the flat sides of the shaft (the knob has a matching D-shape or flat receiver inside) and push it firmly into place until it seats fully. Rotate the knob through its full range of positions to confirm it clicks into detents cleanly and turns smoothly. Restore power and run a test cycle. Tools needed: None (soft cloth optional).
Frequently Asked Questions
Is this the smaller or larger knob on my GE washer?
The WH01X24378 is the smaller cycle selector (options) knob. Many GE washers and dryers have two knobs on the control panel: a larger main timer/cycle knob that selects the primary wash program, and a smaller cycle options knob (this one) that selects sub-options like temperature, spin speed, or soil level. Before ordering, look at your control panel and identify which knob has failed — if the smaller knob is broken, this is the correct part. If the larger main timer knob is broken, you need a different part (PS11736611 on many GE models). The two knobs are not interchangeable.
How do I remove the old knob if it's cracked or spinning without coming off?
If the internal grip on the old knob has stripped and it's spinning freely on the shaft without releasing, wrap a soft cloth around it for extra grip and pull firmly straight up. If that still doesn't work, gently pry it off with a plastic pry tool (a plastic putty knife or credit card can work). Avoid metal tools that could scratch the control panel finish. If the knob is cracked, you can sometimes break away the broken pieces to expose the internal grip on the shaft, then work each piece off. Once the old knob is off, inspect the control shaft — if it's damaged or spinning without resistance, the underlying switch may need replacement too.
Do I really not need any tools for this?
Correct — the WH01X24378 uses a snap-on installation with no screws or hardware. To install, align the new knob with the flat side (D-shape) of the control shaft and push it straight down until it seats fully. The whole replacement typically takes under a minute. Just make sure the knob is fully seated and rotates through all positions with the correct detent clicks before you plug the appliance back in.
The knob installs fine but my washer still doesn't change settings — what next?
If the new knob is installed correctly (fully seated and rotates through positions with detent clicks) but changing the knob position doesn't change the cycle behavior, the underlying selector switch or control shaft has likely failed — not the knob. Common causes include the shaft spinning freely without engaging the switch inside (the shaft has stripped or broken), or the electrical selector switch itself has failed. In these cases, replacing just the knob won't fix the problem — the switch assembly behind the panel also needs to be replaced. Contact our support team with your model number for the correct switch part number.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from heat-resistant plastic to match the dimensions, D-shape shaft receiver, snap-on installation, and cycle selection function of the original WH01X24378 selector knob used in compatible GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
5304524452 Washer Genuine OEM Drain Pump Assembly
The 5304524452 is a genuine Frigidaire OEM drain pump assembly for Frigidaire stacked laundry center (washer/dryer combo) units, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Westinghouse, and Kenmore models. This pump removes wash water from the tub at the end of each cycle, draining it out before the washer refills with fresh water for rinses.
Common causes of a failing pump include normal wear and tear over time, an obstructed drain line, or issues with the pump housing or impeller. Symptoms of a bad pump assembly include incomplete draining of water at the end of cycles, water pooling in the tub, or the washer failing to advance through its cycle because it can't clear the water. It directly replaces 4246239, 4839543, 4959972, 5304500535, 5304515673, A03077601, AP5962219, AP6333076, AFR19009, AP6989734, BPX401-13J, EAP11703882, EAP12365991, EAP16218540, PD00063454, PS16218540.
Quick Answer
The 5304524452 Washer Genuine OEM Drain Pump Assembly fixes Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Westinghouse, and Kenmore stacked laundry center units where the washer won't drain, water pools in the tub, or the cycle won't advance past the drain step. Replaces 4246239, 4839543, 4959972, 5304500535, 5304515673, A03077601, AP5962219, AP6333076, AFR19009, AP6989734, BPX401-13J, EAP11703882, EAP12365991, EAP16218540, PD00063454, PS16218540. Several sources note that some replacement drain pumps look similar to this one but aren't the same part — check your original pump's model number or your washing machine's model number carefully before ordering.
Common Problems This Part Fixes
Washer not draining at the end of a cycle
Water pooling or standing in the tub after a completed cycle
Washer failing to advance past the drain step
Incomplete draining leaving damp or soaked clothes
Pump making unusual noise from a damaged impeller
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drain pump assembly directly replaces the following OEM and cross-reference part numbers:
5304524452, 4246239, 4839543, 4959972, 5304500535, 5304515673, A03077601, AP5962219, AP6333076, AFR19009, AP6989734, BPX401-13J, EAP11703882, EAP12365991, EAP16218540, PD00063454, PS16218540
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump assembly is compatible with select Frigidaire stacked laundry center units, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Westinghouse, and Kenmore combo units built on the same platform, including model numbers such as CFLE3900UW0, CFLE3900UW1, CFLE3900UW3, FFLE3900UW0, FFLE3900UW1, FFLE3900UW2, FFLE3900UW3, FFLE3911QW0, FFLE3911QW1, FFLE39C1QW0, FFLE4033QT0, FFLE4033QW0, FFLE40C3QT0, FFLE40C3QW0, FFLG3900UW0, FFLG3900UW1, FFLG3900UW2, FFLG3900UW5, FFLG3911QW0, FFLG3911QW1, FFLG3911QW2, FFLG4033QT0, FFLG4033QT1, FFLG4033QW0, FFLG4033QW1, SFLG3911RW0, SFLG3911RW1, SFLG4033RT0, SFLG4033RT1, SFLG4033RW0, SFLG4033RW1, and Kenmore 417.61712510, 417.61712511, 417.61722510, 417.61723510, 417.61732810, 417.61733810, 417.71712510, 417.71712511, 417.71722510, 417.71722511, 417.71723510, 417.71723511, 417.71732810, and 417.71733810.
Note — similar-looking but different pumps exist: Some replacement drain pumps are visually similar to this one but aren't compatible. Check your original pump's model number or your washing machine's model number carefully before ordering. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified pump housing and impeller design
Drains wash water from the tub at the end of each cycle
Resolves "won't drain," "water pooling," and "won't advance past drain step" symptoms
Direct drop-in replacement matching the original mounting and hose connections
Replaces 4246239, 4839543, 4959972, 5304500535, 5304515673, A03077601, AP5962219, AP6333076, AFR19009, AP6989734, BPX401-13J, EAP11703882, EAP12365991, EAP16218540, PD00063454, PS16218540
Compatible with Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Westinghouse, and Kenmore laundry center units
Genuine OEM replacement — guaranteed fit, materials, and performance
Simple DIY repair with basic tools
Product Specifications
Part Number
5304524452
Part Type
Washer Drain Pump Assembly
Condition
Genuine OEM
Brand
Frigidaire
Application
Stacked Washer/Dryer Laundry Centers
Function
Drains wash water from the tub at the end of each cycle
Repair Difficulty
Easy
Quantity
1 drain pump assembly
Compatible Brands
Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Westinghouse, Kenmore
Installation Notes
⚠️ Unplug The Laundry Center And Shut Off Water Supply Before Starting Disconnect power to the laundry center unit and shut off the water supply before beginning. Wear work gloves and have towels ready for any residual water. Access the pump, typically located at the bottom front or rear of the washer section depending on your model. Remove the clamp attaching the hose to the old pump, then remove the hose. Remove the three screws holding the pump to the washer. Take out the old pump. Install the new 5304524452 in the same position and secure it with the three mounting screws. Reattach the hose to the new pump and secure the clamp. Restore the water supply and power, then run a test cycle to confirm the washer drains completely with no leaks. Tools needed: pliers, screwdriver, work gloves.
Frequently Asked Questions
My washer isn't draining. Is this the part I need?
Yes, this is the most direct symptom of a failed drain pump. Since this pump is responsible for removing wash water from the tub at the end of each cycle, a worn impeller or internal failure can leave water standing in the tub and prevent the washer from advancing to the next stage of the cycle.
Is this a difficult repair?
No, one customer described it as an easy removal and installation: remove the clamp attaching the hose to the pump, remove the hose, remove the three screws holding the pump to the washer, then reverse the process with the new pump.
How do I make sure I'm ordering the correct pump, since some look similar?
Check the model number printed on your original pump, or your washing machine's full model number, before ordering. Multiple sources note that some replacement drain pumps look visually similar to this one but aren't actually compatible, so matching your specific part or model number is the reliable way to confirm fit.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original pump housing, impeller, and connection type of the drain pump assembly originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WP389386 Washer Lower Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP389386, 389386, 2418, 99989683, AP6008839, PS11741980.
Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.
XPARTCO W10721967 Washer Drive Clutch Kit
The XPARTCO W10721967 is an aftermarket replacement drive clutch kit — often called a "splutch" kit — for Whirlpool-built top-load washers. This assembly sits at the base of the transmission and works together with the mode shift actuator to control how power reaches the washer: during agitation, the clutch engages to drive the washplate back and forth, and during spin, it locks up to spin the inner wash basket at full speed. The name "splutch" comes from what it actually is — part spring, part clutch — and that spring-loaded design is what lets the same assembly smoothly transition between the gentle agitate motion and the much more forceful spin cycle.
This is a complete 6-piece kit: spring, clutch housing, cam ring, basket drive gear, drive pulley, and mounting nut, so you're replacing the entire wear-prone assembly at once rather than chasing individual worn components. Over time the clutch's friction surfaces glaze over and wear down, the cam ring's engagement points round off, and the spring loses tension — all of which produce the same telltale complaint: a loud grinding, clicking, or clunking noise during agitation or spin, sometimes alongside a washer that spins weakly, agitates but won't spin, or runs hot and starts to smell from the friction of a slipping clutch. It directly replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, and PS10057144.
Quick Answer
The XPARTCO W10721967 Washer Drive Clutch Kit fixes Whirlpool-built top-load washers with loud grinding, clicking, or clunking noise during agitation or spin, a washer that agitates but won't spin, weak or no spin, an overheating smell, or a drum that doesn't spin the pump properly. Complete 6-piece "splutch" kit — spring, housing, cam ring, basket drive gear, pulley, and nut. Replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, PS10057144. Often replaced together with the drive belt, since both wear on a similar schedule and share the same teardown.
Common Problems This Part Fixes
Loud grinding, clicking, or clunking noise during agitation or spin
Washer agitates normally but won't spin, or spins very weakly
Drive pump doesn't rotate properly, leading to slow or incomplete draining
Washer stops agitating partway through a cycle
Washer running unusually hot, sometimes with a burning or odd odor
Loud noise specifically when transitioning between agitate and spin
Clothes coming out excessively wet because the spin cycle isn't reaching full speed
Rattling or looseness felt at the drive pulley when the basket is turned by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive clutch kit directly replaces the following OEM and cross-reference part numbers:
W10721967, W10721967VP, AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10818965, W11396423, 3319979, PS10057144, EAP10057144, AWP40988, PD00005593.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive clutch kit is compatible with select Whirlpool-built top-load washers across the Whirlpool family of brands, including:
Whirlpool top-load washers — WTW series
Maytag top-load washers — MVWC series (select Whirlpool-built models)
Kenmore top-load washers — KATW and NTW series (select Whirlpool-built models)
Amana top-load washers (select models)
Crosley top-load washers (select models)
Roper top-load washers (select models)
Inglis top-load washers (select models)
Verified model numbers include: 1CWTW4705GW0, 1CWTW4705GW1, 1CWTW4705GW2, 1CWTW4815EW0, 1CWTW4815EW1, 1CWTW4815EW2, 1CWTW4815EW3, 1CWTW4840YW2, 1CWTW4845EW0, 1CWTW4845EW1, 1CWTW4845EW2, 1CWTW4845EW3, 2DWTW4740YQ1, 4GWTW1805LW0, 4GWTW1805LW1, 4GWTW1955LW0, 4GWTW1955LW1, 4GWTW3000FW0, 4GWTW3000FW1, 4GWTW4740YQ3, 4GWTW4800YQ3, 4KATW5215FW0, 4KATW5415FW0, 4KMVWC215FW0, 4KMVWC315FW0, 4KMVWC410JW0, 4KMVWC415FW0, 4KMVWC420JW0, 4KMVWC425FW0, 4KMVWC430JW0, 4KMVWC440JW0, 4KNTW3100JW0, 4KNTW3200JW0, 4KNTW3300JW0, 7MWGT4027HW1, WTW5000DW1, and MVWX655DW1.
Note: This kit fits Whirlpool's belt-drive top-load washer platform specifically. It is not intended for direct-drive designs that don't use a separate clutch and belt system. Because this drive clutch kit fits an extremely broad range of model years and revisions, always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Complete 6-piece "splutch" kit — spring, clutch housing, cam ring, basket drive gear, drive pulley, and mounting nut
Works together with the mode shift actuator to engage agitation and lock up for full-speed spin
Resolves "grinding or clicking noise," "won't spin," "agitates but won't spin," and "overheating smell" symptoms caused by clutch wear
Replaces the entire wear-prone assembly at once rather than individual components
Direct drop-in replacement for the washer transmission's drive pulley and clutch assembly
Replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, and PS10057144
Compatible with a wide range of Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, and Inglis top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10721967
OEM Part Number
W10721967 / AP5951296
Part Type
Washer Drive Clutch Kit ("Splutch")
Condition
Aftermarket Replacement
Application
Whirlpool-Built Belt-Drive Top-Load Washers
Kit Contents
Spring, clutch housing, cam ring, basket drive gear, drive pulley, mounting nut
Function
Engages agitation and locks up for full-speed spin
Repair Difficulty
Moderate — 30-45 minutes
Quantity
1 clutch kit (6 pieces)
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, Inglis
Installation Notes
⚠️ Unplug Washer And Shut Off Water Before Starting — Tip Onto Its Back Or Front With Care Disconnect power at the outlet or shut off the circuit breaker, and close the water supply valves before beginning. Wear work gloves. Access is from underneath the washer: remove the inner wash basket first (this typically requires a large basket-hub or spanner tool and applying steady upward pressure to break the basket free from the drive hub), then carefully tip the washer onto its back or front, protecting the top and any control panel with a blanket or padding as you lay it down. Photograph the belt and pulley arrangement before disconnecting anything. Remove the drive belt from the motor pulley, then remove the mounting nut and pull the old clutch/pulley assembly off the transmission shaft — a puller tool can help if it's seized. Install the new W10721967 assembly onto the shaft in the same orientation, torque the mounting nut to the manufacturer's specification, and reinstall the drive belt, checking that it seats correctly in the pulley grooves. Carefully stand the washer back upright, reinstall the wash basket, and reconnect it to the drive hub. Restore water and power, then run a full test cycle through agitate and spin, listening for the grinding or clicking noise that prompted the repair. Tools needed: basket-hub removal tool or spanner wrench, socket set, 13mm socket, 5/16" nut driver, pliers, work gloves, and a helper to assist with tipping the washer.
Frequently Asked Questions
What does "splutch" mean, and why is it sold as one kit instead of individual parts?
"Splutch" is shorthand for spring-clutch — the assembly combines a spring-loaded clutch mechanism with the drive pulley and gear that together control agitation and spin. Whirlpool sells this as a single kit because the individual components wear together and interact closely; replacing just the pulley while leaving a worn cam ring or a fatigued spring in place often means the noise or slipping symptom returns quickly. Replacing the complete kit resolves the failure at its actual source.
My washer agitates fine but won't spin. Is this the clutch?
It's one of the most common causes of exactly that symptom. The clutch has to lock up firmly to transfer full power into spinning the basket; if its friction surfaces have worn down or glazed over, it can still engage well enough for the lighter agitation motion but slip under the higher torque demand of spin. If you hear grinding or clicking specifically as the washer transitions into spin, that reinforces the clutch as the likely cause.
Should I replace the drive belt at the same time?
It's worth strongly considering. The belt and clutch wear on a similar schedule and share the same teardown — you're already tipping the washer over and removing the belt to access the clutch, so replacing a belt that's showing wear at the same time saves you from repeating the whole disassembly again in the near future. Inspect the belt for glazing, cracking, or fraying while it's off and replace it if it shows any of those signs.
The washer smells hot or burnt. Is that dangerous, and does it point to this part?
A worn clutch that's slipping generates friction heat, which can produce a warm, slightly burnt smell — this is a real symptom of clutch wear and not something to ignore, since continued operation in that state accelerates wear on the clutch and can stress the drive motor. If you notice this smell along with weak or absent spin, stop using the washer and address the clutch before running further loads.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the spring tension, cam ring engagement geometry, pulley dimensions, and mounting configuration of the original W10721967 clutch kit used in compatible Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, and Inglis top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC31-00187A Washer Drain Pump Motor
The XPARTCO DC31-00187A is an aftermarket replacement washer drain pump motor compatible with select Samsung front-load and top-load washers in the WA4, WA5, WF2, WF3, WF4, and WF5 series, as well as select Kenmore washers built on the Samsung platform. The drain pump motor drives the impeller that expels water from the washer tub during the drain phase of each wash cycle. When the motor fails, the washer will not drain, will leave standing water in the tub, stop mid-cycle, or display error codes 5C, SE, SC, 5E, or SUDS.
This motor-only assembly includes the pump motor, impeller, and replacement O-ring. Rated 120V, 60Hz, 80W, 1.1A (CL.F), with a 30-minute on / 30-minute off duty cycle. Dimensions: 4-1/4"L x 3"W x 4-1/4"H in gray/white/black plastic, metal, and rubber housing. The DC31-00187A is the motor component that installs into the existing pump housing on compatible Samsung washers — the pump housing (DC97-20621C assembly) is reused from the old pump, making this a motor-only swap rather than a complete pump replacement. It directly replaces DC31-00187D, DC31-00178A, DC31-00178D, PX3516-01, 03DC3100187A, 4958525, AP6977256, EAP9605762, PD00056512, PS9605762, and PS1274262. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO DC31-00187A Washer Drain Pump Motor fixes Samsung front-load and top-load washers displaying error codes 5C, SE, SC, 5E, or SUDS, not draining, leaving standing water, or making loud noise during the drain cycle. Motor-only assembly — includes motor, impeller, and O-ring; installs into existing pump housing. 120V/60Hz/80W/1.1A/CL.F. 30 min on/30 min off. 4-1/4"L x 3"W x 4-1/4"H. Replaces DC31-00187D, DC31-00178A, DC31-00178D, PX3516-01, 4958525, AP6977256, PS9605762. Compatible with Samsung WA4/WA5/WF2/WF3/WF4/WF5 series.
Common Problems This Part Fixes
Washer not draining — standing water remaining in the tub after a cycle
Error codes 5C, SE, SC, 5E, or SUDS displayed — drain fault detected
Washer stopping mid-cycle due to a drain fault
Loud humming during the drain phase — motor energized but impeller not turning
Grinding or rattling during drain — damaged impeller or worn motor bearings
Clothes excessively wet after a cycle — pump not fully removing water before spin
Water draining very slowly — motor weakening below rated performance
Replaces Part Numbers
This drain pump motor directly replaces the following OEM and cross-reference part numbers:
DC31-00187A, DC31-00178A, DC31-00178D, 03DC3100187A, ASM654116, EAP9605762, 4958525, AP6977256, PD00056512, PS12742622, PX3516-01.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Samsung front-load and top-load washers from the following series:
Samsung top-load washers — WA4 series (WA40J3000AW, WA44A3205AW, WA45H7000AW, WA45M7050AW, WA45N3050AW, WA45T3200AW, WA45R6100AC and related models)
Samsung top-load washers — WA5 series (WA50F9A6DSW, WA50M7450AW, WA50R5200AW, WA50R5400AV and related models)
Samsung front-load washers — WF2 series (select models)
Samsung front-load washers — WF3 series (select models)
Samsung front-load washers — WF4 series (WF42H5000AW, WF42H5200AW, WF45M5500AW, WF45N5300AW, WF45R6100AC, WF45T6000AW, WF45A6400AV, WF45B6300AP and related models)
Samsung front-load washers — WF5 series (select models)
Kenmore / Sears washers (select Samsung-built models)
Note: The DC31-00187A is the pump motor only — it installs into the existing pump housing (DC97-20621C assembly) which is retained from the old pump. The housing is not replaced. Check and clean the drain filter before replacing the pump motor — a clogged filter is a common cause of drain errors that doesn't require motor replacement.
Key Features
Pump motor only — includes motor, impeller, and O-ring; installs into the existing DC97-20621C pump housing retained from the old pump
Drives the pump impeller to expel water from the washer tub during the drain cycle
Resolves Samsung error codes 5C, SE, SC, 5E, and SUDS caused by drain pump motor failure
Rated 120V, 60Hz, 80W, 1.1A (CL.F) — correct specifications for compatible Samsung washers
Duty cycle: 30 minutes on / 30 minutes off
Dimensions: 4-1/4"L x 3"W x 4-1/4"H
Replaces DC31-00187D, DC31-00178A, DC31-00178D, PX3516-01, 4958525, AP6977256, PS9605762, and PS1274262
Compatible with Samsung WA4, WA5, WF2, WF3, WF4, WF5 series and Kenmore Samsung-built washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
XPDC31-00187A
Also Covers
DC31-00187D, DC31-00178A, DC31-00178D (variants)
Part Type
Washer Drain Pump Motor (Motor Only — reuses existing housing)
Condition
Aftermarket Replacement
Application
Samsung Front-Load and Top-Load Washers (WA4/WA5/WF2/WF3/WF4/WF5)
Voltage
120V AC
Frequency
60 Hz
Wattage
80W
Amperage
1.1A
Duty Class
CL.F
Duty Cycle
30 minutes on / 30 minutes off
Dimensions
4-1/4"L x 3"W x 4-1/4"H
Color
Gray / White / Black
Material
Plastic / Metal / Rubber
Includes
Pump motor, impeller, O-ring
Error Codes Resolved
5C, SE, SC, 5E, SUDS
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Gloves Disconnect power and turn off the water supply before beginning. Wear work gloves — there are sharp edges inside the washer cabinet. For front-load models: remove the lower front access panel to expose the pump housing and filter. Drain residual water via the filter drain hose (have a shallow pan ready). Disconnect the wire harness from the motor. On most Samsung front-load models, the motor assembly twists out of the pump housing by rotating counter-clockwise — do not force it. Remove the old motor, note the O-ring position, and install the new O-ring from this kit onto the new DC31-00187A motor. Insert the new motor into the housing and twist clockwise to lock. Reconnect the wire harness. Reinstall the lower panel, restore power and water, and run a drain/spin cycle to confirm drainage. For top-load models: access through the lower front panel or by tilting the washer on its side depending on model. Tools needed: Phillips screwdriver, pliers, shallow pan, towels, work gloves.
Frequently Asked Questions
What is the difference between DC31-00187A and DC97-20621C?
The DC31-00187A is the drain pump motor — the electrical component that drives the impeller. The DC97-20621C is the complete drain pump assembly, which includes the motor plus the outer pump housing, hose connection ports, and mounting hardware. When you order the DC31-00187A, you replace only the motor and reuse the existing DC97-20621C pump housing. When you order the DC97-20621C, you replace the entire assembly including the housing. Both resolve the same drain fault — the DC31-00187A is the more targeted repair when the housing is in good condition.
What error codes indicate a drain pump motor failure?
Error codes 5C, SE, SC, 5E, and SUDS on compatible Samsung washers all indicate a drain fault — the washer was unable to drain within the expected time. Before replacing the motor, clean the drain filter/coin trap at the lower front panel. A clogged filter is one of the most common causes of these error codes and does not require motor replacement. If the filter is clear and the codes persist, or if the pump is making loud noise or is completely silent during the drain phase, the motor needs replacement.
What is the difference between DC31-00187A and DC31-00178A?
These are cross-references for the same or very similar Samsung drain pump motor used across different Samsung washer generations. The DC31-00178A was used on earlier Samsung models and the DC31-00187A is the current version. Both are commonly listed as interchangeable replacements for each other in Samsung washer drain pump repair. The DC31-00187D and DC31-00178D are also variants of the same motor from different production runs.
Should I clean the filter before replacing the pump motor?
Yes — always check and clean the drain filter first. On Samsung front-load washers, the filter is accessible behind the lower front kick panel, typically on the right side — remove the cap slowly and drain water into a shallow pan first. Lint, coins, debris, and hair are very common causes of Samsung drain error codes that are completely resolved by cleaning the filter without any parts replacement. If the filter is clear and the error codes persist, the pump motor is the next component to replace.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications and performance of the original DC31-00187A drain pump motor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WP3363003 Washer Upper Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP3363003, 3363003, 2654, AP6008106, PS11741237.
Description: The Upper Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines.
