MDS66290824 Genuine OEM Washer Door Gasket
The Genuine OEM MDS66290824 is a factory-original door boot gasket manufactured by LG for use in LG front-load washers and washer-dryer combo units. The gasket forms the watertight seal between the door, cabinet, and tub, flexing with every door open/close cycle while keeping wash water contained inside the drum. As the rubber ages, it commonly cracks, tears, or develops mold/mildew buildup in its folds, and a compromised seal leads directly to water leaking out around the door during the wash or spin cycle.
This is a current-production part: MDS66290824. As the genuine LG part, it ships in factory black rubber matching the original color, fold pattern, and mounting groove, so it seats and seals exactly like the original.
Quick Answer
The Genuine OEM MDS66290824 Washer Door Gasket fixes LG front-load washers and washer-dryer combo units that leak water around the door, or that have a cracked, torn, or moldy door boot seal. Classic symptom: water pooling on the floor in front of the washer after a cycle, with visible cracking or gaps in the door seal.
Common Problems This Part Fixes
Water leaking from around the door during the wash or spin cycle
Visible cracks, tears, or splits in the door boot rubber
Mold or mildew buildup trapped in the gasket folds that won't clean out
Door boot pulling away from its mounting groove on the cabinet or tub
Musty odor coming from the washer even after cleaning
Door won't seal fully closed due to a warped or damaged gasket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door gasket directly replaces the following OEM and cross-reference part numbers:
MDS66290824, 4963077, 4981902, AP6993434, ALG55389, AP7212758, EAP16224172, EAP16879236, PD00084356, PS16224172, PS16879236.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door gasket is compatible with select LG front-load washers and washer-dryer combo units, including:
LG W3S1CVK2EHM, W3S1CVK2ENS, W3S1CVK2EVS, W3S1CVK2RNS, W3S1CVK2RVS
LG WKEX200HBA, WKEX200HGA, WKEX200HWA
LG WKGX201HBA, WKGX201HGA, WKGX201HWA
LG WM4500HBA, WM5500HVA, WM5700HVA
LG F3S1CWK2WN and related WashTower/combo dryer units sharing this door assembly
Note: If your parts diagram or old part still shows MDS66290803, this current MDS66290824 gasket is the correct replacement — the earlier revision has been superseded and is no longer produced new. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM door boot gasket — factory-original fit, seal, and color match
Resolves "leaking around the door," "cracked/torn boot," and "moldy seal" symptoms
Current production part — supersedes the earlier MDS66290803 revision
Black rubber construction matching original factory appearance
Approximately 13"W x 15"L x 10"H, ~3 lb 1 oz
Replaces MDS66290824, MDS66290803, 4963077, 4981902, AP6993434, ALG55389, AP7212758, EAP16224172, EAP16879236, PD00084356, PS16224172, PS16879236
Compatible with select LG front-load washers and washer-dryer combo units
Genuine OEM part — factory-specified rubber compound and mounting groove fit
Product Specifications
Part Number
MDS66290824
OEM Part Number
MDS66290824
Part Type
Washer Door Boot Gasket
Condition
Genuine OEM Replacement
Color
Black
Material
Rubber/elastomer gasket seal
Dimensions
Approx. 13"W x 15"L x 10"H
Weight
Approx. 3 lb 1 oz
Compatible Brand
LG
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power before beginning. Open the door and locate the large outer retaining band (spring clamp) holding the gasket to the front cabinet panel — release it with pliers or a flat-blade screwdriver and pull the gasket's outer lip free from the cabinet opening. Working around the boot, fold the gasket into the drum opening to access the inner retaining band securing it to the tub; release this band as well and remove the old gasket. Check for and transfer any small parts such as the drain/pressure sensor port fitting if your model routes one through the boot. Fit the new MDS66290824 gasket's inner lip into the tub-side mounting groove first, working it evenly around the full circumference, then reinstall the inner retaining band. Fold the gasket back out and seat the outer lip into the cabinet opening, aligning it evenly, then reinstall the outer retaining band. Restore power and run a cycle with the door closed to check for leaks around the full perimeter of the seal. Tools needed: pliers or a flat-blade screwdriver, and a spring clamp tool if your model uses a wire-spring outer band.
Frequently Asked Questions
Is MDS66290824 the same as MDS66290803?
MDS66290824 is the current genuine LG gasket, and it supersedes the earlier MDS66290803 revision, which is no longer produced new. If your washer's parts diagram or old gasket shows MDS66290803, this MDS66290824 is the correct current replacement — LG has updated the part number but the fit and function for your model remain the same.
My washer is leaking water from the door — is this the part I need?
In most cases, yes. A worn, cracked, or torn door boot gasket is the most common cause of water leaking around the door on a front-load washer. Inspect the gasket's folds closely for splits or debris (coins, small items) caught in the seal, since a foreign object trapped in the boot can also prevent a full seal without the gasket itself being damaged.
Do I need to transfer any parts from my old gasket?
Check whether your model routes a drain hose fitting, pressure sensor port, or door lock striker through the boot itself. If so, that fitting typically transfers from the old gasket to the new one, or is a separate reusable part — inspect your old gasket carefully before disposal in case a component needs to be moved over.
Can I clean mold out of the gasket instead of replacing it?
Light surface mold can often be cleaned with a diluted bleach or vinegar solution and a soft brush, and running the washer's tub-clean cycle regularly helps prevent it from returning. However, if mold has caused the rubber to degrade, crack, or lose its seal, cleaning won't restore a proper watertight fit — replacement is the reliable fix once the gasket itself is damaged.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine LG OEM Part ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 8181651 Washer Door Striker
Replaces Part Numbers: WP8181651, 8181651, 906446, AP6011711, PS11744910.
Description: This Door Strike is a replacement part for specific Maytag, Kenmore, Whirlpool washing machine models. This component is responsible for providing a secure and proper closure for the washer door, ensuring it seals tightly during operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
WP21352320 Genuine OEM Whirlpool Washer Drive Belt
The WP21352320 is a genuine Whirlpool OEM drive belt for Whirlpool top-load washers. This belt connects the drive motor to the transmission at the bottom of the washer, and it's what actually spins the basket during the wash and spin cycles. Unlike a dryer's drum belt, which simply tumbles a drum, this washer drive belt has to transfer real torque to spin a heavy, water-filled basket, which puts it under considerably more mechanical stress.
Measuring approximately 51" long and 3/8" wide. A worn or broken belt produces a distinctive set of symptoms: the washer may not spin at all, spin only slowly, agitate poorly or not at all, fail to drain properly since the pump relies on the same drive system, or produce a burning smell or loud grinding noise as a worn belt slips against the pulley. One useful diagnostic tip worth knowing: a belt can look intact at a glance but still be worn out — if the sides of the belt appear shiny or glazed rather than matte, that's a sign of slippage-related wear even without a visible crack. It directly replaces 21001478, 21352320, 35-2073, 35-2320, AP6005822, WP21352320VP, and PS11738882.
Quick Answer
The WP21352320 Genuine OEM Whirlpool Washer Drive Belt fixes Whirlpool, Maytag, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Amana, Kenmore, KitchenAid, and Ikea top-load washers with a drum that won't spin, spins slowly, won't agitate, won't drain, or produces a burning smell or loud grinding noise. Approximately 51" long, 3/8" wide. Replaces 21001478, 21352320, 35-2073, 35-2320, AP6005822, WP21352320VP, PS11738882. A belt can look intact but still be worn out — check the sides for a shiny, glazed appearance, which indicates slippage wear even without a visible crack.
Common Problems This Part Fixes
Washer drum won't spin, or spins only slowly
Washer won't agitate during the wash cycle
Washer won't drain properly
Burning smell coming from the washer during operation
Loud grinding noise from underneath the washer
Washer that shakes or moves excessively during spin
Washer that won't start or stalls partway through a cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive belt directly replaces the following OEM and cross-reference part numbers:
WP21352320, 21352320, 21001478, 35-2073, 35-2320, 35-3662, PD00002418, EAP11738882, AP6005822, AWP46532, PS11738882, WP21352320VP
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive belt is compatible with select Whirlpool top-load washers, and also fits select Maytag, Roper, Admiral, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, and Ikea washers built on the Whirlpool platform, including model numbers such as HAV3460AWW.
Note: Always verify your full model number before ordering, since Whirlpool uses several different drive belts across its top-load washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified length, width, and material
Connects the drive motor to the transmission to spin the basket
Resolves "won't spin," "won't agitate," "won't drain," "burning smell," and "grinding noise" symptoms caused by belt failure
Approximately 51" long, 3/8" wide
Direct drop-in replacement matching the original belt routing
Replaces 21001478, 21352320, 35-2073, 35-2320, AP6005822, WP21352320VP, and PS11738882
Compatible with Whirlpool, Maytag, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Amana, Kenmore, KitchenAid, and Ikea top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP21352320
Part Type
Washer Drive Belt
Condition
Genuine OEM
Brand
Whirlpool
Application
Top-Load Washers
Length
Approx. 51 in.
Width
3/8 in.
Attaches To
Motor pulley and transmission
Repair Difficulty
Medium — basic hand tools required
Quantity
1 drive belt
Compatible Brands
Whirlpool, Maytag, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Amana, Kenmore, KitchenAid, Ikea
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Consider The Motor Pulley While You're In There Disconnect power at the outlet or shut off the circuit breaker, and shut off both the hot and cold water supply valves before beginning. Pull the washer out from the wall for full access. Wear work gloves. Locate the drive belt around the motor at the bottom of the washer. Use a flathead screwdriver or hex wrench to remove the screws holding the motor bracket in place, which releases tension on the belt. Carefully slide the motor bracket off the motor, and use pliers if needed to work the old belt off the pulley. While the bottom of the washer is accessible, this is a good time to inspect the motor pulley for wear as well, since it's a related component you'll already have exposed. Install the new WP21352320 belt around the pulley and transmission, following the same routing as the old belt, and make sure it's seated securely and tightened properly — a loose or improperly seated belt will slip and wear out quickly. Reattach the motor bracket with its screws. Restore the water supply and power, then run a test cycle to confirm the washer spins, agitates, and drains normally with no unusual noise. Tools needed: multi-bit screwdriver, hex wrench, standard pliers, work gloves.
Frequently Asked Questions
My belt looks fine — no cracks or visible damage. Could it still need replacing?
Yes, and this is a common source of confusion. A belt can appear intact with no cracks and still be worn out. Check the sides of the belt closely: if they look shiny or glazed rather than having a matte, textured surface, that glazing indicates the belt has been slipping against the pulley, which is a clear sign of wear even without visible cracking.
My washer pumps and drains but the drum spins slowly or not at all. Is this the belt?
Yes, this is one of the most direct symptoms of a worn or slipping drive belt. Since this belt is what actually transfers the motor's power to spin the basket, a worn belt can slip under load, causing slow or absent spinning even though the motor itself and the drain pump are both working normally.
Should I replace the motor pulley at the same time?
It's worth inspecting while you have the bottom of the washer accessible, even if you don't end up replacing it. A worn pulley can accelerate wear on a brand-new belt, so checking its condition during this repair is a reasonable precaution, especially if your old belt showed the glazed, slipping-related wear pattern.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original length, width, and routing configuration of the drive belt originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WH23X27419 Washer Genuine OEM Drain Pump – Compatible with GE, Haier & Hotpoint Washers
Product Description
Restore proper draining and reliable washer performance with the WH23X27419 Washer Genuine OEM Drain Pump. This original equipment manufacturer (OEM) drain pump is engineered by the manufacturer to exact specifications, ensuring proper water removal during drain and spin cycles. A failing drain pump can cause standing water, slow draining, loud noises, or error codes. Replacing it with this genuine OEM pump helps return your washer to factory-level performance and reliability.
This part is a Genuine OEM component, designed for exact fit, correct electrical ratings, and long-term durability.
Replaces Part Numbers
WH23X27419, WD-5470-09, 4588221, PD00053097, EAP12343437, AP6328341, PS12343437.
Compatibility
This Genuine OEM washer drain pump fits select GE and Hotpoint top-load washers.
Example compatible models include (but are not limited to):
GE GTW465ASNWW, GTW485ASJWS
Hotpoint HTW240ASKWS
Haier HLP24E, RWT350AW, GWT450AW, XQB6091AF, Xqb60-91Af, HLP28E, GWT480BW
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🏭 Genuine OEM Part – Manufactured to original factory specifications
💧 Efficient Water Removal – Restores proper draining and spin performance
🔇 Quiet Operation – Reduces grinding or humming noises
💪 OEM-Grade Motor & Housing – Built for long service life
🔧 Exact Fit & Plug-and-Play Installation – No modifications required
📐 Product Specification
Part Number: WH23X27419
Component Type: Washer Drain Pump
Voltage: 120V AC
Mounting: Direct-fit, bolt-on installation
Application: Washer drain and spin system
OEM Status: Genuine OEM
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.
Basic Steps:
Disconnect washer power and water supply.
Access the drain pump from the bottom or rear of the washer.
Remove hoses and electrical connectors.
Remove mounting screws and take out the old pump.
Install the new WH23X27419 Genuine OEM drain pump.
Reconnect hoses and wiring, reassemble panels, and restore power.
Run a test cycle to confirm proper draining.
⏱️ Time Required: 25–35 minutes
📦 Shop With Confidence
🏭 Genuine OEM Appliance Part
🚚 Free Shipping on All Orders
🔄 30-Day Return Policy
Restore factory-level washer performance and reliable draining — Add to Cart Now with confidence!
XPARTCO 5220FR2008C Washer Water Valve
The XPARTCO 5220FR2008C is an aftermarket replacement water inlet and dispenser valve assembly for LG front-load washers, and also fits select Kenmore models. This valve connects to your home's water source and to the washer's solenoid wiring, controlling exactly how much water enters the tub and ensuring the correct fill level for each cycle. The assembly has 1 inlet and 4 outlets.
Rated 120V, 60Hz. Common failure causes include mineral or sediment buildup inside the valve body and general electrical wear in the solenoid coils. A failing valve produces a clear set of symptoms: the washer continuing to fill even after it should be full, filling slowly, overfilling, or leaking water into the drum when the washer is off. On some LG models, this can also trigger an FE error code specifically tied to the fill process. It directly replaces 5220FR2008C, 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429
Quick Answer
The XPARTCO 5220FR2008C Washer Water Valve fixes LG and select Kenmore front-load washers that keep filling past full, fill slowly, overfill, or leak water into the drum when off — sometimes accompanied by an FE error code. 120V, 60Hz, 1 inlet, 4 outlets. Replaces 5220FR2008C, 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429. Some LG steam washers use this valve alongside a separate hot water valve — if only one side is failing, you may only need to replace the specific valve at fault rather than the whole group.
Common Problems This Part Fixes
Washer continues filling with water even after it should be full
Washer filling slowly
Washer overfilling
Water leaking into the drum when the washer is turned off
FE error code displayed during the fill portion of the cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
5220FR2008C, 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select LG front-load washers, and also fits select Kenmore washers built on the LG platform.
Note: LG uses several visually similar water valves across its washer lineup, including 5220FR2006H and 5221ER1003S. This part is also closely related to our 5220FR2008C cold water inlet valve listing — some model listings note that either may fit depending on the exact production run, but they are separate part numbers. Always confirm your exact part number — comparing your old valve's printed number and photo against the listing is the most reliable way to avoid ordering a similar-looking but incorrect valve. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement water inlet and dispenser valve assembly
Resolves "won't stop filling," "fills slowly," "overfills," "leaks when off," and "FE error code" symptoms
1 inlet, 4 outlets
Rated 120V, 60Hz
Sold individually
Direct drop-in replacement — matches the original mounting and hose connections
Replaces 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429
Compatible with LG and select Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XP5220FR2008C
OEM Part Number
5220FR2008C
Part Type
Washer Water Inlet & Dispenser Valve Assembly
Condition
Aftermarket Replacement
Application
Front-Load Washers
Voltage
120V
Frequency
60 Hz
Inlets / Outlets
1 inlet, 4 outlets
Weight
Approx. 0.60 lbs
Package Dimensions
5.12" x 4.69" x 3.98"
Repair Difficulty
Easy to Moderate
Quantity
1 valve (sold individually)
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access on most LG front-load washers requires removing the top cover to reach the water valve assembly and its electrical connections and hoses. On models with multiple valves (some LG steam washers use one separate hot water valve plus a group of cold water valves), identify specifically which valve is failing before removing anything — check your old valve's printed part number and compare it against a reference photo, since several LG valves look very similar. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and hose from the failing valve, remove its mounting screws, and pull it free. Install the new 5220FR2008C in the same position, reconnect the hose and electrical connector fully, and secure the mounting screws. Restore the water supply and power, then run a full test cycle to confirm correct fill behavior with no leaking or error codes. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
My washer shows an FE error code. Is this the valve I need?
Possibly. One customer reported an FE error appearing while the machine was still "filling," which pointed to one of the hot or cold water valves not working correctly. If your FE error consistently appears during the fill portion of the cycle, this valve is a reasonable place to start troubleshooting.
My washer has more than one water valve. Do I need to replace all of them?
Not necessarily. Some LG steam washers use a separate hot water valve plus a group of valves fed from the cold water main, and it's common for only one specific valve in that group to actually be bad. One customer confirmed this exact setup, testing and replacing only the single failing valve rather than the entire group, which resolved their issue.
How do I make sure I'm ordering the correct valve, since several look similar?
Check the part number printed directly on your old valve and compare it, along with a photo if available, against the listing before ordering. One customer specifically noted that several LG valves looked alike, and having a clear reference photo was what let them positively identify the correct replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured to match the solenoid design, inlet/outlet configuration, and electrical rating of the original 5220FR2008C valve used in compatible LG and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
EXPFFSB Microwave Door Switch and Fuse Kit – Replaces FSSBA016KIT & 5303319559 – Compatible with Frigidaire & Electrolux Microwaves
Product Description
Restore proper microwave safety operation with the EXPFFSB Microwave Door Switch and Fuse Kit. This aftermarket repair kit includes the essential components needed to fix common microwave door and power issues, including one door switch and one ceramic fuse.
A faulty door switch or blown fuse can prevent the microwave from starting, cause intermittent power loss, or trigger safety shutdowns. Replacing both components together helps restore reliable microwave operation and prevents repeat failures.
This kit is engineered to match original fit and electrical performance while offering a cost-effective alternative to OEM parts.
This kit includes:
1 Microwave Door Switch
1 Microwave Fuse
Replaces Part Numbers
FSSBA016KIT, FFS-BA016/KIT, PS2422854, FFSBA016/KIT-R, FFSBA016/KIT, FFSBA016KIT, 5303319559, 634759, 75303319559, PD00026535, EAP466978, AH466978, EA466978, AP2148482, PS466978, 5304467695, 1467286, 75304467695, AH2339493, EA2339493, AP4357598, PS2339493, 5304461109, 1260958, 75304461109, AH1765534, EA1765534, AP4057424, PS1765534, 4313105, 565130, 8185302, AH358056, EA358056, AP3032745, PS358056, 5304479020, 1793730, AH3409702, EA3409702, AP4588054, PS3409702
Compatibility
This microwave door switch and fuse repair kit fits select Frigidaire, Electrolux, Gibson, Kelvinator, and Kenmore (Frigidaire-manufactured) microwaves.
Common compatible models include (but are not limited to):
Frigidaire FFMV1645TS
Frigidaire FGMV176NTF
Always verify your microwave’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Complete Repair Kit – Includes door switch and microwave fuse
⚡ Restores Microwave Power – Fixes no-start and power loss issues
🔒 Door Safety Function – Ensures proper door interlock operation
🧩 Direct-Fit Components – Designed for straightforward installation
💰 Cost-Effective Repair – Replace two common failure parts at once
📐 Product Specification
Kit Number: EXPFFSB
Includes:
(1) Microwave Door Switch
(1) Microwave Fuse
Application: Microwave door interlock and circuit protection
Fuse Type: Ceramic microwave line fuse
Quality Level: Aftermarket replacement kit (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the microwave before servicing to avoid electrical shock. Microwaves contain high-voltage components—ensure the capacitor is discharged before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or control panel to access the door switch assembly.
Replace the faulty door switch.
Locate and replace the blown fuse.
Reassemble the microwave and restore power.
Test door operation and heating function.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Replacement Parts
🔄 30-Day Return Policy
Restore microwave safety and reliable operation — Add to Cart Now for a complete repair solution!
XPARTCO DG44-01002A Surface Element Infinite Switch
The XPARTCO DG44-01002A is an aftermarket replacement dual element infinite switch (energy regulator) for Samsung electric ranges. This switch does two jobs at once: it regulates how much electrical current reaches its surface element, which is what lets you dial in a precise heat level rather than just on/off, and it also controls the "hot surface" indicator light associated with that burner, letting you know when the element is still hot after use.
Over time, the internal contacts in this switch can wear, stick, or fail electrically. Because a single switch controls both functions, a failing switch can produce two very different-looking symptoms depending on which function is affected: the burner may stay stuck on high heat regardless of the dial setting, fail to produce any heat at all, or the hot surface indicator light may stay on for hours after the surface has completely cooled, even though the element itself tests fine. It directly replaces 2087510, MDSA-W21-SKM, MDSA-W888-UNM, MDSA-W888-UM, AP4337066, PS4240803, and EAP4240803.
Quick Answer
The XPARTCO DG44-01002A Surface Element Infinite Switch fixes Samsung electric ranges where a burner is stuck on high heat regardless of the dial setting, won't produce any heat at all, or the hot surface indicator light stays on for hours after the surface has cooled. Dual element design. Replaces 2087510, MDSA-W21-SKM, MDSA-W888-UNM, MDSA-W888-UM, AP4337066, PS4240803, EAP4240803. This switch controls both the element and its indicator light — if your indicator light won't turn off even though the burner is cool, this switch (not the element) is the cause.
Common Problems This Part Fixes
Burner stuck on high heat regardless of the dial setting
Burner won't produce any heat at all
Hot surface indicator light stays on for hours after the burner has completely cooled
Inconsistent heating — burner doesn't hold the selected temperature level
Unresponsive burner controls
Burner that heats erratically rather than at a steady, selected level
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This range surface element infinite switch directly replaces the following OEM and cross-reference part numbers:
DG44-01002A, 2087510, , MDSA-W21-SKM, PS4240803, AP4337066, EAP4240803, ASM37999, PD00006793, 737534552513
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This infinite switch is compatible with select Samsung electric ranges in the FCQ3, FE71, FER3, FTQ3, and NE59 series, including model numbers such as NE59J3420 and NE59J4310.
Note: This is the switch, not the radiant heating element itself — the companion element is a separate part, DG47-00022A. If you're diagnosing a burner problem, it's worth testing both parts, since either one failing can cause similar symptoms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement dual element infinite switch (energy regulator)
Controls both the surface element's heat output and its hot surface indicator light
Resolves "stuck on high heat," "won't heat at all," and "indicator light stays on" symptoms caused by switch failure
Direct drop-in replacement — matches the original mounting and wire connections
Replaces 2087510, MDSA-W21-SKM, MDSA-W888-UNM, MDSA-W888-UM, AP4337066, PS4240803, and EAP4240803
Compatible with Samsung electric ranges in the FCQ3, FE71, FER3, FTQ3, and NE59 series
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair, typically 10 to 15 minutes
Product Specifications
Part Number
XPDG44-01002A
OEM Part Number
DG44-01002A
Part Type
Range Surface Element Infinite Switch (Energy Regulator)
Condition
Aftermarket Replacement
Brand
Samsung
Design
Dual element
Function
Regulates surface element heat output; controls hot surface indicator light
Related Part
DG47-00022A radiant element (sold separately)
Repair Difficulty
Easy — 10 to 15 minutes
Quantity
1 infinite switch
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Range Before Starting — Photograph Wiring Before Disconnecting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically from the rear of the control panel or the underside of the cooktop, depending on your model. Photograph the wiring connections on the old switch before disconnecting anything, since correct wire placement is essential for the switch to control the right burner and indicator light. Remove the screws securing the old switch, gently pry it out, and mark or note each wire's position for reference. Disconnect the wires from the old switch and remove it fully. Install the new DG44-01002A in the same position, reconnect each wire to its original terminal exactly as photographed, and secure the mounting screws. Restore power and test the burner across its full range of settings, confirming both the heat output and the indicator light behave correctly. Tools needed: screwdriver, pliers, pen or pencil for marking wires, work gloves.
Frequently Asked Questions
My hot surface light stays on for hours even though the burner has cooled down. Is this the switch?
Yes. This is a documented symptom specific to this switch, since it controls both the surface element and its indicator light together. If the light isn't going out even though the surface itself is cool to the touch, the switch — not the element — is the correct part to replace.
My burner is stuck on high heat no matter what setting I choose. Is that the switch or the element?
It could be either, so it's worth testing both with a multimeter before replacing. Test the radiant element first — it should read between 0 and 120 ohms if it's working correctly. Then test the infinite switch itself: remove it, connect a multimeter probe to each prong, and turn the switch to an on position. No continuity indicates the switch is the issue. Several customers have confirmed this exact symptom by swapping switches between two burners and watching the problem follow the switch, which is also a reliable way to isolate the cause if you have two dual-element burners.
Should I replace the element (DG47-00022A) at the same time?
Not necessarily, but it's worth testing both parts if you're not sure which one has failed, since a bad element and a bad switch can produce overlapping symptoms. If your multimeter tests confirm only the switch has failed, replacing just this part is sufficient.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the dual-element switching function, wire terminal configuration, and mounting design of the original DG44-01002A infinite switch used in compatible Samsung electric ranges.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
AGM30045804 Genuine OEM LG Dryer Thermistor and Thermostat Kit
The AGM30045804 is a genuine LG OEM high-limit thermostat and thermistor kit for LG dryers. These two components work together in the same temperature-regulation circuit: the thermistor is a temperature sensor, mounted in the blower housing with its wire harness included, that continuously reports drum temperature to the control board so it can fine-tune heat output throughout the cycle. The high-limit thermostat is a safety switch that automatically shuts off the heating element if temperatures climb past a safe threshold, then resets itself once the dryer cools, without needing to be replaced the way a thermal fuse does.
Because these two parts share the same circuit and tend to wear or fail around a similar timeline, LG sells and services them together as one kit rather than as separate individual parts. Symptoms of failure in this circuit include the dryer overheating (which can scorch clothing or, left unaddressed, pose a fire risk), the dryer running with little or no heat, drying times that have become inconsistent, an error code related to temperature control on the display, or clothes coming out damp after a full cycle. It directly replaces 6931EL3003C, 6323EL2001B, 6931EL3003F, 6931EL3004B, AP7206815, EAP16732335, and PS16732335.
Quick Answer
The AGM30045804 Genuine OEM LG Dryer Thermistor and Thermostat Kit fixes LG (and select Kenmore, GE-branded LG-built) dryers with overheating, little or no heat, inconsistent drying times, a temperature-related error code, or clothes coming out damp after a full cycle. High-limit thermostat + thermistor with wire harness. Replaces 6931EL3003C, 6323EL2001B, 6931EL3003F, 6931EL3004B, AP7206815, EAP16732335, PS16732335. If you've already replaced the high-limit thermostat alone and the problem returns, this combined kit — which also addresses the thermistor — is the next step.
What's In The Kit
Component
Function
High-Limit Thermostat
Automatically shuts off the heating element if temperature exceeds safe limits, then resets itself once the dryer cools.
Thermistor (with wire harness)
Continuously senses drum/blower housing temperature and reports it to the control board to regulate heat output throughout the cycle.
Common Problems This Kit Fixes
Dryer overheating, sometimes scorching or damaging clothing
Dryer running with little or no heat
Inconsistent drying times — cycle shuts off too early or runs longer than necessary
Temperature-related error code displayed on the control panel
Clothes remaining damp after a full drying cycle
High-limit thermostat that keeps tripping repeatedly
Dryer that has already had its high-limit thermostat replaced once but the problem returned
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermistor and thermostat kit directly replaces the following OEM and cross-reference part numbers:
AGM30045804, 6931EL3003C, 6931EL3004B, 6931EL3002B, 6931EL3003F, 6931EL3003G, 6323EL2001B, ALG53406, AP7206815, EAP16732335, PD00079467, PS16732335
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This kit is compatible with select LG dryers, and also fits select Kenmore and GE-branded dryers built on the LG platform.
Note: A specific verified model list was not consistently available across sources at the time this page was built. Some parts diagrams reference additional related thermostat components (such as a separate blower thermostat) beyond what's included in this kit — if your repair involves more than a high-limit thermostat and thermistor, or if you're unsure exactly what's failed on your model, contact our support team with your model number and we'll help confirm which parts you need before you order.
Key Features
Genuine LG OEM part — factory-specified resistance values and switch thresholds
Combined kit addresses the high-limit thermostat and thermistor together, since both share the same temperature-regulation circuit
Resolves "overheating," "little or no heat," "inconsistent drying," and "damp clothes after a full cycle" symptoms
Thermistor ships with its wire harness included
High-limit thermostat resets automatically after tripping — no replacement needed after each trip
Direct drop-in replacement for both original components
Replaces 6931EL3003C, 6323EL2001B, 6931EL3003F, 6931EL3004B, AP7206815, EAP16732335, and PS16732335
Compatible with LG and select Kenmore and GE-branded LG-built dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AGM30045804
Part Type
Dryer High-Limit Thermostat and Thermistor Kit
Condition
Genuine OEM
Brand
LG
Kit Contents
High-limit thermostat + thermistor with wire harness
Thermistor Location
Blower housing
High-Limit Thermostat Type
Automatically resetting
Repair Difficulty
Easy to Moderate — 30 to 60 minutes
Compatible Brands
LG, select Kenmore, GE (LG-built models)
Installation Notes
⚠️ Unplug Dryer Before Starting — Let It Cool Fully First Disconnect power at the outlet or shut off the circuit breaker before beginning, and allow the dryer to cool completely if it was recently run. Wear work gloves. Access on many LG models follows this general sequence: remove the lint screen, then remove the two front panel screws underneath it, the two screws on the face of the panel, and the two screws holding the blower cover in place. Disconnect the door switch connector and remove the front panel. With the front open, release the drive belt from the tensioner and remove the drum to access the blower housing where the thermistor is located. Photograph the wiring connections before disconnecting anything, since the thermistor and high-limit thermostat can be easy to confuse with other similar-looking components nearby. Disconnect and remove the old thermistor and high-limit thermostat, noting their exact mounting positions. Install the new components from this kit in the same positions, reconnecting wiring exactly as photographed. Reinstall the drum, re-tension the belt over the tensioner, and reassemble the front panel, blower cover, and lint screen area in reverse order. Restore power and run a full test cycle to confirm normal, consistent heating with no premature shutoffs. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
I already replaced the high-limit thermostat, but it keeps tripping. Why would I need this kit instead?
This is a well-documented pattern. If the thermistor — the sensor that reports temperature to the control board — is misreading heat, the control can keep driving the heating element past the point where the high-limit thermostat has to trip repeatedly to protect the dryer, even with a brand-new thermostat installed. Replacing the thermistor alongside the thermostat addresses the root cause rather than just the symptom, which is exactly why LG packages them together as one kit.
What's the difference between the thermistor and the high-limit thermostat?
The thermistor is a sensor, not a switch — it's a variable resistor whose resistance changes with temperature, and the control board reads that value continuously to regulate heat output throughout the cycle. The high-limit thermostat is a safety switch that does one job: it shuts off the heating element automatically if temperature exceeds a safe limit, then resets itself once things cool down. A failing thermistor causes inconsistent or inaccurate heat regulation; a failing high-limit thermostat causes the dryer to shut off unexpectedly or fail to protect against overheating.
My parts diagram shows more thermostat-like parts than what's in this kit. Did I order the wrong thing?
Not necessarily — some LG dryer models have additional related components, such as a separate blower thermostat, that are not part of this specific kit. This kit covers the high-limit thermostat and thermistor. If your repair calls for additional related parts, or if you're not sure exactly which components your model needs, contact our support team with your model number and we'll help you confirm the complete parts list before you order.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It includes the same resistance values, switch threshold, and wire harness configuration as the high-limit thermostat and thermistor originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WD13X10031 Dishwasher Genuine OEM Door Latch
Replaces Part Numbers: WD13X10031, 1088549, AH959002, EA959002, AP3778749, PS959002.
Description: This dishwasher door latch, model WD13X10031, is a genuine OEM part. It ensures a secure and reliable closure of your dishwasher door, preventing any leaks and ensuring effective cleaning. With this product, you can have peace of mind knowing your dishes will be washed efficiently and without any hassle.
XPARTCO 5304512529 Microwave Door Switch – Compatible with Frigidaire, Electrolux, and Kenmore Microwaves
Product Description
Ensure safe and reliable operation with the XPARTCO 5304512529 Microwave Door Switch. This high-quality aftermarket replacement detects when the microwave door is closed, allowing the appliance to run safely. A faulty switch can cause the microwave not to start, stop mid-cycle, or operate with the door open — a serious safety concern. Replacing it with this durable XPARTCO switch restores proper interlock function and dependable performance.
Replaces Part Numbers
5304512529, 4584691, PD00051808, EAP12365114, AP6278576, PS12365114.
Compatibility
This replacement door switch fits select Frigidaire, Electrolux, and Kenmore microwave models.
Example compatible models include (but are not limited to): Frigidaire FFMV1645TS, Electrolux E30MO75HPS, and Kenmore 790.80353310.
Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to meet OEM safety and performance standards
⚡ Restores Safe Operation – Ensures microwave only operates when the door is securely closed
💰 Budget-Friendly Fix – High-quality alternative to expensive OEM replacements
🛠️ Quick Installation – Direct-fit replacement; installs easily with basic tools
🛡️ Fixes Common Issues – Solves no-start, mid-cycle shutdowns, or unsafe door operation
📐 Product Specification
Part Number: 5304512529
Component Type: Microwave Door Interlock Switch
Material: Heat-resistant plastic housing with copper terminals
Mounting: Snap-in bracket installation
Operating Conditions: Designed for high-voltage microwave circuits
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver
⚠️ Safety First: Always unplug the microwave before servicing. Microwave capacitors can retain dangerous voltage even when unplugged — use extreme caution or contact a qualified technician.
Steps:
Disconnect power and remove the microwave cover.
Locate the door latch assembly containing the switches.
Disconnect wiring connectors and remove the old switch.
Install the new XPARTCO 5304512529 door switch into the same slot.
Reconnect wiring, reassemble the cover, and test door operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your microwave’s performance and safety — Add to Cart Now for a reliable, budget-friendly replacement!
Genuine OEM WH13X28374 Washer Hot Water Inlet Valve
The Genuine OEM GE WH13X28374 is the hot water inlet valve for select GE washers. It controls the flow of hot water into the washer, which the washer uses to fill and to reach the right wash temperature. When the valve fails, the washer may not fill with hot water, may not fill at all, or may leak at the valve.
This is the original GE part, not an aftermarket equivalent. It is sold individually and is the hot water valve only. The cold water valve is a separate part, so check your model number and parts diagram before ordering.
Quick Answer
The Genuine OEM WH13X28374 Washer Hot Water Inlet Valve replaces a worn or failed hot water valve on a compatible GE washer. Classic symptoms: no hot water or water that won't fill, or water leaking at the valve.
When To Replace This Part
Washer doesn't fill with hot water
Washer fills slowly or not at all
Water leaks at the valve
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Part Number
This hot water inlet valve is GE part number:
WH13X28374, 4977547, AGE26378, AP6889115, EAP12723092, PD00064395, PS12723092
If your old valve shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This hot water inlet valve is listed for select GE washers, including these examples:
GE GFQ14ESSN0WW, GFQ14ESSN1WW
GE GFW148SSM0WW, GFW148SSM1WW
GE QFW150SSN0WW, QFW150SSN1WW
Note: The models above are a sample, not a full list. GE sells other water valves, including cold water valves, under different part numbers. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Hot water inlet valve for select GE washers
Sold individually
Product Specifications
Part Number
WH13X28374
OEM Part Number
WH13X28374
Part Type
Washer Hot Water Inlet Valve
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Valve
Application
Select GE Washers
Installation Notes
⚠️ Unplug The Washer And Shut Off The Water Unplug the washer and shut off the hot and cold water supplies before you start. Water can remain in the hoses and valve, so have towels ready. Take a photo of the hose and wiring connections before disconnecting anything, then transfer them to the new valve in the same positions. Turn the water back on slowly and check for leaks before using the washer.
Frequently Asked Questions
My washer isn't filling with hot water. Is the valve the fix?
Possibly. A failed hot water valve can cause it, but a clogged valve screen, a closed supply faucet or a wiring or control problem can too, so check those first.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
Is this the hot or cold water valve?
This is the hot water inlet valve. The cold water valve is a separate part with a different part number.
Will this fit my washer?
It is listed for select GE washers, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
