V-151-1C25 Micro Limit Switch
Contact Type: SPDT 1NO 1NC
Actuator Type: Short Hinge Lever
Rating: 15A 125 250VAC
Lever Length: 15mm / 0.6"
Rating: 15A,1/2HP, 125 250VAC; 0.6A,125VDC; 0.3A, 250VDC
IMPORTANT! You should call ahead to confirm availability of an item before going to the store. store's actual inventory can change from minute to minute. Calling the store will allow you to confirm that the item is still available. Some items may not be immediately available for pickup at your local store. Prices and availability may differ from web prices at local pickup location.
XPARTCO WH11X34742 (OE) Washer Drain Pump – Compatible with GE & Hotpoint Washers
Product Description
Restore proper water drainage and dependable washer performance with the XPARTCO WH11X34742 (OE) Washer Drain Pump. This OE (Original Equipment) replacement is manufactured to match original factory design and performance specifications, ensuring efficient water removal during drain and spin cycles.
A failing drain pump can cause standing water, slow draining, excessive noise, or cycle interruption. Replacing it with this OE-spec XPARTCO pump helps restore smooth operation while offering a more cost-effective alternative to Genuine OEM parts.
XPARTCO OE parts are built to match original fit and function while maintaining affordability.
Replaces Part Numbers
WH11X34742, WH01X28078, PD00076830, EAP16729517, AP7192541, PS16729517
Compatibility
This OE washer drain pump fits select GE and Hotpoint top-load washers.
Common compatible models include (but are not limited to):
GE GTW335ASNWW, GTW465ASNWW
Hotpoint HTW240ASKWS
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 OE (Original Equipment) Replacement – Matches original factory specifications
💧 Efficient Water Removal – Restores proper draining performance
🔇 Quiet Operation – Reduces humming or grinding noises
💪 Durable Motor & Housing – Designed for long service life
💰 Cost-Effective Alternative – OE quality without Genuine OEM pricing
📐 Product Specification
Part Number: WH11X34742
Component Type: Washer Drain Pump
Voltage: 120V AC
Mounting: Direct-fit, bolt-on installation
Application: Washer drain and spin system
Quality Level: OE (Original Equipment) – not Genuine OEM
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.
Basic Steps:
Disconnect washer power and water supply.
Access the drain pump from the bottom or rear of the washer.
Remove hoses and electrical connectors.
Remove mounting screws and remove the old pump.
Install the new XPARTCO WH11X34742 (OE) drain pump.
Reconnect hoses and wiring, reassemble panels, and restore power.
Run a test cycle to confirm proper draining.
⏱️ Time Required: 25–35 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted OE Appliance Parts
🔄 30-Day Return Policy
Restore reliable washer draining with confidence — Add to Cart Now for a dependable OE-spec repair!
XPARTCO WB24X10190 Microwave Door Switch – Compatible with GE, Hotpoint, and RCA Microwaves
Product Description
Restore safe and reliable microwave operation with the XPARTCO WB24X10190 Microwave Door Switch. This high-quality replacement detects when the microwave door is closed, allowing power to flow safely to the control board. A faulty door switch can cause the microwave not to start, stop mid-cycle, or run with the door open. Installing this durable replacement ensures proper safety interlock function and restores dependable performance.
Replaces Part Numbers
WB24X10190, 1810589, AH3486598, PD00054718, EAP3486598, EA3486598, AP4980350, PS3486598.
Compatibility
This replacement door switch fits select GE, Hotpoint, and RCA microwave models.
Example compatible models include (but are not limited to): GE JVM1540LM1CS, GE JVM6175DK1WW, and Hotpoint RVM1535DM1BB.
Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM safety and performance standards
⚡ Restores Safe Operation – Ensures microwave runs only when the door is properly closed
💰 Affordable Solution – High-quality part at a lower price than OEM versions
🛠️ Quick Installation – Direct-fit replacement installs in minutes with basic tools
🛡️ Fixes Common Issues – Resolves microwaves not starting, stopping mid-cycle, or running with the door open
📐 Product Specification
Part Number: WB24X10190
Component Type: Microwave Door Interlock Switch
Material: Heat-resistant plastic housing with metal terminals
Mounting: Snap-in style for interlock bracket assembly
Operating Conditions: Rated for high-voltage microwave circuits
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver
⚠️ Safety First: Unplug the microwave before servicing. Capacitors can retain high voltage even when unplugged — use caution or contact a qualified technician.
Steps:
Unplug the microwave and remove the outer cover.
Locate the door latch assembly and access the switch bracket.
Disconnect the wiring harness and release the old switch from the bracket.
Install the new XPARTCO WB24X10190 switch in the same orientation.
Reconnect wires, reinstall the cover, and test operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore your microwave’s safety and performance — Add to Cart Now for a reliable, budget-friendly repair!
WP3347288 Washer Lower Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP3347288, 3347288, 3348245, 3352107, 519233, AP6008022, PS11741151.
Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.
XPARTCO DC97-15459G Washer Water Valve
The XPARTCO DC97-15459G is an aftermarket replacement water inlet valve assembly compatible with a wide range of Samsung top-load washers. This valve mounts at the rear of the washer and controls the flow of water into the drum, opening electronically when the control board calls for a fill and closing once the target water level is reached. It connects via five terminal connections to the wiring harness and to the hot/cold supply hoses.
When this valve fails, the washer commonly won't fill with water, fills very slowly, overfills, or continues to trickle water even when powered off — the last of which points to a valve that isn't sealing properly rather than an electrical fault. It directly replaces DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861. Sold individually; does not include wire harness or mounting screws. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO DC97-15459G Washer Water Valve fixes Samsung top-load washers that won't fill, fill slowly, overfill, or leak/drip water even when the washer is unplugged. 5-terminal connection for wiring and hot/cold hose lines. Sold individually — wire harness and mounting screws not included. Replaces DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861. Classic symptom: washer trickles water into the drum even when it's completely powered off.
Common Problems This Part Fixes
Washer won't fill with water at all
Washer fills very slowly or takes much longer than normal
Washer overfills or keeps adding water past the normal level
Water trickles or leaks into the drum even when the washer is off
Leaking or dripping at the water inlet connection point
Error code related to water fill or water level on the display
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with a wide range of Samsung top-load washers, including:
Samsung WA45H7200AP/AW, WA48H7400AP/AW, WA48J7770AP/AW
Samsung WA50F9A6/7/8 series, WA50K8600AW, WA50M7450AP/AW
Samsung WA52J8700AP/AW, WA52M7750AV/A4 and related WA52M7750 series
Select Kenmore washers (Samsung-built models)
Note: This valve is sold individually and does not include the wire harness or mounting screws — reuse your existing hardware during installation. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement Samsung washer water inlet valve assembly
Resolves "won't fill," "slow fill," "overfilling," and "leaking when off" symptoms
Electronically controlled valve opens/closes based on control board signal
5-terminal connection for wiring harness and hot/cold hose lines
Replaces DC97-15459G, 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861
Compatible with a wide range of Samsung top-load washer models
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
XPDC97-15459G
OEM Part Number
DC97-15459G
Part Type
Washer Water Inlet Valve Assembly
Condition
Aftermarket Replacement
Terminals
5-terminal wiring/hose connection
Sold As
Individually (wire harness and screws not included)
Application
Samsung Top-Load Washer Water Supply
Compatible Brands
Samsung, Kenmore
Installation Notes
⚠️ Shut Off Water Supply and Unplug Washer Before Starting Turn off both the hot and cold water supply valves and disconnect power to the washer before beginning. Pull the washer away from the wall for access to the rear panel. Disconnect the hot and cold water supply hoses from the old valve — have a towel ready to catch residual water. Photograph the wiring before disconnecting, then unplug the wire harness connectors from the old valve. Remove the mounting screws holding the valve to the cabinet and remove the old valve. Install the new DC97-15459G valve in the same position using your existing mounting screws (not included with this part) and reconnect the wire harness, matching your photos. Reconnect the hot and cold supply hoses, making sure they're threaded onto the correct ports. Turn the water supply back on and check for leaks at the hose connections before restoring power. Run a test cycle to confirm the washer fills correctly and doesn't leak. Tools needed: adjustable pliers or channel locks (for hose connections), Phillips and flat-head screwdrivers.
Frequently Asked Questions
My washer trickles water into the drum even when it's unplugged — is this the part?
Yes, this is a classic symptom of a water inlet valve that isn't sealing properly. Since the valve is the only thing standing between your home's pressurized water supply and the drum, a valve that won't fully close will let water trickle through even with zero power to the washer. This is different from an electrical fill problem, which typically shows up as the washer not filling at all rather than filling when it shouldn't.
Does this include the wire harness and mounting screws?
No — this valve is sold individually. You'll reuse your existing wire harness connector and mounting screws from the old valve during installation.
Will this fit my Kenmore washer?
This valve fits select Kenmore washers that were built by Samsung and share this platform's water valve design. Confirm your appliance model number before ordering, since not all Kenmore washers use this valve.
Do I need to shut off the water supply to replace this?
Yes — always shut off both the hot and cold water supply valves before disconnecting the hoses from the old valve. Skipping this step will result in water spraying from the open supply lines once the hoses are disconnected.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA34-00006C Refrigerator Door Switch
Product Overview
The XPARTCO DA34-00006C Refrigerator Door Switch controls the interior light and signals the control system when the refrigerator door is opened or closed. The DA34-00006C Refrigerator Door Switch is an aftermarket replacement that controls the interior light and signals the control board when the refrigerator or freezer door is open or closed. A faulty switch may result in lights not turning on, fan or cooling issues, or error codes. This switch restores proper operation and ensures your refrigerator functions efficiently every time the door is opened or closed.
This is a two button refrigerator door switch, fits Specific Samsung refrigerator models.
Quick Answer
If your refrigerator light stays on or does not turn on, or the unit behaves as if the door is open/closed incorrectly, the DA34-00006C door switch may be faulty. Replacing it restores correct light function and door status detection.
Replaces Part Numbers
Replaces OEM part number: DA34-00006C, DA34-00006D, DA34-00048A, 1567024, DA34-10122D, EAP2522335, ASM708482, PD00002031, AP4136952, PS4138718.
Compatibility
This refrigerator door switch is compatible with select Samsung and compatible refrigerators.
Samsung Refrigerators
French Door & Side-by-Side Models
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Refrigerator light not turning on
Interior light stays on
Cooling issues related to door detection
Control panel errors due to door status
Key Features
Controls interior light operation
Detects door open/close status
High-quality aftermarket replacement
Durable and reliable construction
Product Specifications
Part Number: DA34-00006C
Part Type: Refrigerator Door Switch
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Refrigerator Door Detection & Light Control
Troubleshooting Guide
Light won’t turn on → Faulty door switch
Light stays on → Switch stuck or not engaging
Cooling affected when door closes → Door status not detected
When Should You Replace This Switch?
Replace this switch if the refrigerator light behaves incorrectly or if the unit is not detecting door position properly.
Installation Notes
⚠️ Disconnect power before installation. Remove the old switch from the cabinet housing, disconnect wiring, and install the new switch securely.
Related Parts
Refrigerator Light Bulb
Door Gasket
Control Board
Frequently Asked Questions
Will this switch fit my refrigerator?This switch fits many Samsung and compatible models. Always verify your model number.
What does a door switch do?It turns the interior light on/off and signals the control system when the door opens or closes.
What are signs of a bad door switch?Light not working, light staying on, or improper door detection.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO EXP480 Microwave Door Switch (NC - NO) Normally Closed / Open
The XPARTCO EXP480 is a universal replacement door interlock switch for microwave ovens and microwave/oven combination units. This is a critical safety component: microwave door interlock switches exist specifically to cut power to the magnetron the instant the door opens, preventing any possibility of microwave radiation escaping the cavity while the door isn't fully closed and latched. This switch combines both a normally closed (NC) and normally open (NO) contact set in a single body, matching the dual-contact design used across a wide range of microwave door latch mechanisms.
Rated 16A maximum current, 250VAC maximum voltage, with an IP40 protection rating. Over time, these switch contacts can wear, pit, or fuse together from repeated cycling and the electrical load they carry every time the door opens and closes. A failing interlock switch typically shows up as a microwave that won't start at all, a display that works but the unit won't heat, or in less common but more serious cases, a switch that has fused shut and continues carrying current even when it shouldn't. It directly replaces 28QBP0496, W10211972, 4375346, W10330566, WPW10330566, 1472224, 4393442, 4393498, 4393570, 4393697, 4393881, 461967848881, 8206345, W10131248, W10217468, AH2338920, EA2338920, AP4357880, PS2338920, KW3A-16Z0-A200-76, W10727360, W10269457, 3379124, AP5950105, and PS10057151.
Quick Answer
The XPARTCO EXP480 Microwave Door Switch (NC - NO) fixes microwave ovens and microwave/oven combos that won't start, won't heat, or have a door latch mechanism that isn't reliably cutting power when the door opens. 16A, 250VAC, combined NC/NO contact design. Replaces 28QBP0496, W10211972, 4375346, W10330566, WPW10330566, 1472224, 4393442, 4393498, 4393570, 4393697, 4393881, 461967848881, 8206345, W10131248, W10217468, AH2338920, EA2338920, AP4357880, PS2338920, KW3A-16Z0-A200-76, W10727360, W10269457, 3379124, AP5950105, PS10057151. Never operate a microwave with a bypassed, disconnected, or suspected-faulty door interlock switch — these switches exist to prevent radiation exposure and must always be replaced with a properly rated part, never removed or defeated.
Common Problems This Part Fixes
Microwave won't start at all, even though the display and buttons respond normally
Microwave display and timer work, but the unit won't heat
Microwave stops working intermittently, especially around the door latch
Clicking or buzzing sound from the door area without the microwave starting
Breaker tripping when the door is opened, indicating a switch contact that has fused shut
Door that doesn't feel like it's latching securely
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave door switch directly replaces the following OEM and cross-reference part numbers:
28QBP0496, W10211972, 4375346, W10330566, WPW10330566, 1472224, 4393442, 4393498, 4393570, 4393697, 4393881, 461967848881, 8206345, W10131248, W10217468, AH2338920, EA2338920, AP4357880, PS2338920, W10727360, W10269457, 3379124, AP5950105, PS10057151
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door switch is a universal replacement compatible with convection microwave ovens, grill microwave ovens, microwave/oven combination units, and solo microwave ovens across many brands, wherever the original switch matches this NC/NO contact configuration and electrical rating.
Note: Microwave door interlock systems typically use two or three separate switches working together (primary interlock, monitor/secondary switch, and sometimes a third safety switch), and not all of them share this same NC/NO configuration. Confirm which specific switch position has failed on your microwave, and match the contact configuration and electrical rating exactly — never substitute a switch with a different configuration. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which switch your microwave needs.
Key Features
Universal replacement microwave door interlock switch — combined NC (normally closed) and NO (normally open) contact design
Resolves "won't start," "won't heat," and "intermittent operation near the door latch" symptoms caused by switch failure
Rated 16A, 250VAC maximum
IP40 protection rating
Safety approved: CCC, CE, UL, VDE
Suitable for convection, grill, combination, and solo microwave ovens
Direct drop-in replacement matching the original mounting and terminal configuration
Replaces a wide range of OEM part numbers across Whirlpool, GE, and related platforms — see full list above
Built to OEM-equivalent quality standards
Product Specifications
Part Number
EXP480
Part Type
Microwave Door Interlock Switch (NC/NO Combination)
Condition
New — Universal Replacement Part
Contact Configuration
Normally Closed (NC) + Normally Open (NO)
Max. Current
16A
Max. Voltage
250VAC
Operating Temperature
-25°C to +85°C
Protection Degree
IP40
Contact Form
SPDT
Terminal Size
6.3mm (approx. 1/4")
Operating Force
25g (0.245N) – 400g (3.92N)
Material
Plastic
Color
Gray
Safety Approvals
CCC, CE, UL, VDE
Application
Convection, Grill, Combination, and Solo Microwave Ovens
Quantity
1 door interlock switch
Installation Notes
⚠️ Danger — Never Bypass A Door Interlock Switch Unplug the microwave before beginning any work, and if it's a built-in or over-the-range unit, shut off power at the breaker as well. Microwave ovens also contain a high-voltage capacitor that can retain a dangerous electrical charge even after the unit is unplugged — avoid touching internal components near the capacitor and magnetron. Door interlock switches are a critical safety system: they exist specifically to cut power the instant the door opens, preventing microwave radiation from escaping the cavity. Never operate a microwave with an interlock switch disconnected, bypassed, or jumpered, even temporarily — doing so can expose you and others to microwave radiation. If you are not fully comfortable working inside a microwave's internal compartment, have a qualified appliance technician perform this repair instead.
⚠️ Photograph Wiring Before Disconnecting — Match The Failed Switch Exactly Wear work gloves. Remove the outer cabinet or access panel per your model's service instructions to reach the door switch assembly, typically located near the door latch mechanism. Photograph the wiring on the old switch before disconnecting anything, and confirm you're replacing the correct switch position if your microwave uses multiple interlock switches. Disconnect the wire terminals from the old switch, remove its mounting screws, and pull it free. Install the new EXP480 in the same position, reconnect each wire terminal to its original position, and secure the mounting screws. Reinstall the cabinet or access panel. Restore power and test that the microwave starts normally with the door closed, and — this is the critical safety check — confirm the unit stops heating immediately when the door is opened during a test run with a cup of water. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My microwave stopped working. How do I know if it's actually a door switch and not something else?
A common pattern is a microwave where the display and buttons respond normally, but pressing start does nothing, or the unit hums without heating — this points toward the door interlock circuit rather than the control board. Since these switches also serve a critical safety function, if you suspect a fault in this area, it's best to have it properly diagnosed and replaced rather than working around the symptom.
Is it safe to just disconnect a faulty interlock switch so the microwave will run?
No — this is not safe under any circumstances. Door interlock switches exist specifically to cut power to the magnetron the instant the door opens, preventing microwave radiation from escaping. Bypassing, disconnecting, or jumpering one of these switches removes that protection and can expose you and anyone nearby to microwave radiation, even if the microwave otherwise appears to run normally. Always replace a faulty switch with a correctly rated new one rather than working around it.
My microwave trips the breaker whenever I open the door. What does that mean?
This can indicate that one of the door switches — often the one that should open when the door opens — has fused or welded its contacts shut from repeated electrical stress, so it continues carrying current when it shouldn't. This is a genuine safety concern and the affected switch should be replaced promptly rather than continuing to use the microwave.
My microwave uses more than one door switch. How do I know which one to replace?
Most microwaves use two or three separate interlock switches working together, and they don't always share the same contact configuration. Check your appliance's parts diagram or the physical switch you're replacing to confirm it matches this NC/NO combination design before ordering, and always test or verify function with a multimeter if you're uncertain which specific switch has failed.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DC66-00777A Washer Genuine OEM Pulsator Cap – Compatible with Samsung Washers
Product Description
Keep your washer performing like new with the DC66-00777A Washer Genuine OEM Pulsator Cap. This factory-approved cap covers the central bolt on the pulsator (washplate), preventing water, detergent, and debris from entering the hub assembly. A missing or cracked cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this Genuine OEM part ensures a perfect fit, watertight seal, and long-lasting protection.
Replaces Part Numbers
DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312.
Compatibility
This Genuine OEM pulsator cap fits select Samsung top-load washers.
Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, WA45H7000AW/A2, and WA50M7450AW/A4.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-approved part ensures perfect fit and reliable performance
💧 Protective Design – Seals the washplate bolt area to prevent leaks and corrosion
🔇 Reduces Noise – Helps maintain balanced, quiet spin cycles
🛠️ Tool-Free Installation – Snaps securely into place in seconds
🛡️ Fixes Common Issues – Replaces missing, cracked, or leaking pulsator caps
📐 Product Specification
Part Number: DC66-00777A
Component Type: Washer Pulsator (Washplate) Cap
Material: High-grade molded plastic
Color: Silver or gray finish (varies by model)
Mounting: Snap-fit installation over pulsator bolt
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Always unplug the washer before performing any maintenance to prevent electrical shock.
Steps:
Open the washer lid and locate the pulsator (washplate) center.
Remove any old or damaged cap remnants.
Align the new DC66-00777A cap with the bolt opening.
Press firmly until it clicks securely into place.
Close the lid and test the washer.
⏱️ Time Required: Less than 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Protect your washer from moisture and debris — Add to Cart Now for a perfect, factory-quality fit!
285785 Washer Transmission Clutch - Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, and Other Washers
Product Description
Restore your washer’s performance with the replacement 285785 Washer Transmission Clutch. This high-quality replacement clutch assembly, designed for direct-drive (beltless) Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, and other washer models, connects the transmission to the inner tub during the spin cycle and the agitator during the wash cycle. Constructed from durable plastic and metal, this clutch assembly includes a clutch with liner, brake cam driver, retaining clip, blue spring for large capacity (27") washers, and black spring for compact (24") washers. It addresses issues like slow spinning, failure to agitate, burning smells, or excessive shaking.
Note: Includes one clutch assembly with hardware. Disconnect power before installation.
Replaces part numbers: 285785, 2670, 285331, 285380, 285422, 285540, 285761, 285785VP, 3350015, 3350114, 3350115, 3351342, 3351343, 387888, 388948, 388949, 3946794, 3946847, 3951311, 3951312, 62699, 63174, 63765, 64176, PD00002503, EAP334641, AH334641, EA334641, J27-662, LP326, AP3094537, PS334641.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WTW5300SQ0, LSR7233EQ0, LSR8433KQ0, LSQ9544KQ0
Kenmore: 110.26902690, 110.28762790, 110.29822800
KitchenAid: KAWS750JQ0, KAWS850JQ0
Maytag: MAV6451AWW, MAV9750AWW
Amana: NTW4500XQ0
Roper: RAS8245EQ1, RTW4440XQ0
Inglis: ITW4300SQ0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Inglis, and other direct-drive washer models.
🔥 Specifications: replacement clutch assembly, plastic and metal, 4-1/2"L x 4-1/2"W x 1-1/8"H, includes clutch w/liner, brake cam driver, retaining clip, blue spring (1.24" for large capacity 27" washers), black spring (1.46" for compact 24" washers).
💰 Cost-Effective Alternative: replacement clutch offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a socket set, screwdrivers, work gloves; typically installed in 1–2 hours.
🛡️ Reliable Fixes: Resolves slow spinning, failure to agitate, burning smells, excessive shaking, or noisy operation.
Installation Notes:
Safety First: Disconnect the washer from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your washer spinning and agitating smoothly today!
Add to cart now for a budget-friendly fix!
WPW10348269 Genuine OEM Whirlpool Dishwasher Drain Pump Motor
The WPW10348269 is a genuine Whirlpool OEM drain pump motor for Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Crosley, Estate, Inglis, Jenn-Air, Magic Chef, and Roper dishwashers. This pump uses an electric motor to create suction, pulling wastewater out of the tub and expelling it through the drain hose at the end of each cycle. This is the dedicated drain pump, distinct from a circulation pump — such as our WPW10605057 listing — which handles spraying water through the spray arms during the wash itself rather than draining it afterward.
Rated 120VAC, 60Hz, 45W, 0.7A, with a run time pattern of 5 minutes on, 30 minutes off. Ships as a complete pump motor with impeller and O-ring. If the impeller becomes damaged or the motor shorts out and stops draining, the pump body itself can crack over time, leading to leakage — replacing the pump before that happens is the more reliable fix. Symptoms of a failing drain pump include water not draining from the tub, unusual noise such as grinding during the drain phase, or visible leaks from underneath the unit. It directly replaces W10348269, W10084573, 661662, 8558995, 8565839, W10158351, WPW10348269VP, AP6020066, AWP49992, PD00004898, PS11753379
Quick Answer
The WPW10348269 Genuine OEM Whirlpool Dishwasher Drain Pump Motor fixes Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Crosley, Estate, Inglis, Jenn-Air, Magic Chef, and Roper dishwashers that aren't draining, are making grinding noise during the drain phase, or are leaking from underneath. 120VAC, 60Hz, 45W, 0.7A. Includes impeller and O-ring. Replaces W10348269, WPW10348269VP, W10084573, W10158351, 661662, 8558995, 8565839, 2813258, AP6020066, EAP11753379, PD00004898, PS11753379. This is the drain pump — a separate part from our WPW10605057 circulation pump listing, which handles spraying water rather than draining it.
Common Problems This Part Fixes
Dishwasher not draining — standing water left in the tub after a cycle
Grinding noise coming from the drain pump area
Water leaking from underneath the dishwasher
Cycle stalling or failing to advance past the drain step
Dishes not getting cleaned as a downstream effect of drainage problems
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
WPW10348269, W10348269, W10084573, 661662, 8558995, 8565839, W10158351, WPW10348269VP, AP6020066, AWP49992, PD00004898, PS11753379
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Whirlpool dishwashers, and also fits select KitchenAid, Kenmore, Maytag, Amana, Crosley, Estate, Inglis, Jenn-Air, Magic Chef, and Roper dishwashers built on the Whirlpool platform.
Note — drain pump, not circulation pump: This is the dedicated drain pump, which removes wastewater from the tub. It is a separate part from our WPW10605057 listing, which is the circulation pump and diverter motor responsible for spraying water through the spray arms during the wash itself. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pump your dishwasher needs.
Key Features
Genuine Whirlpool OEM part — factory-specified motor and impeller design
Pumps wastewater out of the tub through the drain hose
Resolves "not draining," "grinding noise," and "leaking underneath" symptoms caused by pump failure
Complete assembly — includes pump motor, impeller, and O-ring
Rated 120VAC, 60Hz, 45W, 0.7A
Run time: 5 minutes on, 30 minutes off
Dimensions: approximately 3-1/2"L x 3"W x 3-1/2"H
Direct drop-in replacement — matches the original mounting and hose connections
Replaces W10348269, W10084573, 661662, 8558995, 8565839, W10158351, WPW10348269VP, AP6020066, AWP49992, PD00004898, PS11753379
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WPW10348269
Part Type
Dishwasher Drain Pump Motor (with Impeller and O-Ring)
Condition
Genuine OEM
Brand
Whirlpool
Function
Pumps wastewater out of the tub through the drain hose
Voltage
120VAC
Frequency
60 Hz
Wattage
45 W
Amperage
0.7 A
Run Time
5 min ON / 30 min OFF
Dimensions
Approx. 3-1/2"L x 3"W x 3-1/2"H
Color
White / Gray / Black / Yellow
Related Part
WPW10605057 circulation pump & diverter motor (different function, sold separately)
Repair Difficulty
Beginner to Moderate
Quantity
1 drain pump motor
Compatible Brands
Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Crosley, Estate, Inglis, Jenn-Air, Magic Chef, Roper
Installation Notes
⚠️ Unplug Dishwasher Before Starting — Removing The Unit Makes Access Easier Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. This repair can be done without pulling the dishwasher out from under the counter, but many technicians find it considerably easier to access the pump if you do pull the unit out first. Remove the lower rack and any components blocking access to the tub floor, then work from underneath the dishwasher to reach the drain pump. Test the old pump for continuity with a multimeter before removing it — if it shows no continuity, or if it's getting power but still won't run, that confirms the pump has failed. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the drain hose connection from the old pump, remove its mounting hardware, and pull it free. Install the new WPW10348269 in the same position, reconnect the drain hose connection securely, and reconnect the electrical connector fully. Reinstall any components removed for access and the lower rack. Restore power, run a test cycle, and check underneath for leaks while confirming the tub drains completely at the end. Tools needed: Phillips screwdriver, 5/16" nut driver, 5/8" wrench, flathead screwdriver, multimeter, work gloves.
Frequently Asked Questions
Do I need to pull the dishwasher out from under the counter for this repair?
Not strictly — this pump can be replaced without fully removing the dishwasher. That said, several customers who've done this repair note that pulling the unit out first makes access considerably easier, since you're working from underneath the appliance either way. If you have the space to pull it out, it's worth doing to make the job smoother.
How do I know if the pump has actually failed?
Test the pump motor with a multimeter set to continuity before replacing it. If there's no continuity, or if the pump is receiving power but still won't run, that confirms the motor has failed and the pump should be replaced. This quick check avoids replacing a part that isn't actually the problem.
My old pump was leaking. Why does that happen?
If the impeller becomes damaged or the motor shorts out and stops running, the pump body itself can develop a crack over time, which leads to leakage. Rather than trying to repair a leaking pump, replacing the complete assembly resolves both the drainage failure and the leak at the same time.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original motor, impeller, and hose connection configuration of the drain pump originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11220230 Washer Water Inlet Valve
The XPARTCO W11220230 is an aftermarket replacement washer water inlet valve designed to control the flow of hot and cold water into your washing machine during each cycle. This Water Inlet Valve is a replacement part compatible with specific Maytag, Whirlpool washing machine models. This valve controls water flow into the tub by opening at predetermined points in the cycle. Proper water regulation is necessary for optimum cleaning performance..
Over time, inlet valves can fail due to mineral buildup, electrical issues, or worn internal seals — leading to slow filling, no fill, or continuous water flow. Replacing the valve restores proper water control and helps prevent leaks or cycle errors.
Quick Answer
The XPARTCO W11220230 Washer Water Valve fixes washers that won’t fill, fill too slowly, or won’t stop filling with water. It controls incoming water flow and restores proper wash cycle operation.
Common Problems This Part Fixes
Washer not filling with water
Slow water fill during cycles
Water continuously flowing into washer
Incorrect water temperature
Washer stopping due to fill errors
Leaking or stuck inlet valve
Replaces Part Numbers
This water inlet valve replaces the following part numbers:
W11220230, W10853296, 4591408, W10632527, W10758829, W11096268, AWP43504, EAP12349461, PD00042661, AP6329544, PS12349461
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select washers from the following brands:
Whirlpool washers
Maytag washers
Amana washers
Kenmore / Sears washers (select models)
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Three coil hot and cold water valve.
OEM-equivalent fit, performance, and durability
Restores proper water fill levels and cycle operation
Durable construction resists mineral buildup and wear
Prevents leaks and overfilling issues
Direct replacement for W11220230 valve assembly
Product Specifications
Part Number
W11220230
Part Type
three coil hot and cold water inlet valve.
Application
Top Load / Front Load Washers
Condition
Aftermarket Replacement
Function
Controls Water Flow
Compatible Brands
Whirlpool, Maytag, Amana, Kenmore
Installation Notes
⚠️ Safety First — Disconnect Power & Water Supply Unplug the washer and turn off the water supply before servicing. Remove the rear or top panel to access the inlet valve. Disconnect water hoses and electrical connectors, then remove the mounting screws to replace the valve. Reconnect hoses securely to avoid leaks and test for proper operation after installation.
Frequently Asked Questions
What does a washer water inlet valve do?
It controls the flow of hot and cold water into the washer. When the valve fails, the washer may not fill properly or may overfill.
Will this fix a washer that won’t fill?
Yes, a faulty inlet valve is one of the most common causes of no-fill or slow-fill issues.
Is this an OEM part?
This is a high-quality aftermarket replacement built to OEM-equivalent standards for performance and durability.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in high-quality replacement parts. Fast shipping from our U.S. warehouse and expert support available to help verify compatibility.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
