Search results for "hvac switch"

XPARTCO W10384183 Refrigerator Thermistor Replaces WPW10384183 The XPARTCO W10384183 is an aftermarket replacement thermistor for Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea models. This sensor detects the temperature inside the refrigerator or freezer and sends that reading to the electronic control board, which uses it to regulate cooling and manage the defrost cycle. Finished in black and white, made of plastic and metal, this thermistor measures approximately 4-1/2"L x 9/16"W x 1/4"H, with a 1" probe and a 3.5" lead. Includes the thermistor with its probe and wiring harness/plug. Over time, the sensor's electronics can drift or fail from age or moisture exposure. Because this sensor also plays a role in the defrost cycle on many models, a failing thermistor can cause the evaporator coils to overly frost or ice up, blocking airflow and preventing cool air from reaching the refrigerator compartment even though the freezer itself may still seem cold. Symptoms include inconsistent cooling, a refrigerator that isn't cooling despite a cold freezer, or the appliance failing to defrost properly. It directly replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996. Quick Answer The XPARTCO W10384183 Refrigerator Thermistor fixes Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators with inconsistent cooling, a refrigerator compartment that isn't cooling despite a cold freezer, or improper defrosting. Black/white, plastic/metal, ~4-1/2"L x 9/16"W x 1/4"H, 1" probe, 3.5" lead. Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996. If your freezer's evaporator coils are heavily frosted or iced over, blocking airflow into the refrigerator, this thermistor is a strong candidate for the cause. Common Problems This Part Fixes Inconsistent cooling in the refrigerator or freezer compartment Refrigerator not cooling despite the freezer feeling cold Evaporator coils overly frosted or iced over, blocking airflow Refrigerator not defrosting properly Temperature fluctuations affecting food freshness Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers: WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermistor is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators built on the Whirlpool platform. Note: A related but separate thermistor, W10384184, is used on some of the same or similar models and is sometimes sold as a paired kit alongside this part. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which thermistor your refrigerator needs. Key Features Aftermarket replacement thermistor — senses temperature and reports to the electronic control Resolves "inconsistent cooling," "refrigerator not cooling despite cold freezer," and "improper defrosting" symptoms Includes thermistor with probe and wiring harness/plug Black/white, plastic/metal construction Direct drop-in replacement — no modification required Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996 Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards Typical repair takes 30 to 60 minutes Product Specifications Part Number W10384183 OEM Part Number WPW10384183 Part Type Refrigerator Thermistor Condition Aftermarket Replacement Color Black / White Compatible Brands Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Ikea Includes Thermistor with probe and harness/plug Function Senses internal temperature and reports to the electronic control Repair Difficulty Easy to Moderate — 30 to 60 minutes Quantity 1 thermistor Installation Notes ⚠️ Unplug Refrigerator Before Starting — Defrost Any Iced-Over Coils First Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Remove the interior panel covering the evaporator coils, typically located in the freezer. If the coils and fins are heavily frosted or iced over, allow them to fully defrost before continuing — you can speed this up with a hair dryer on a low setting, kept a safe distance away, or simply let the unit sit unplugged with the door open for a few hours. With the coils clear, locate the old thermistor and unclip it from its mounting position, noting how it's routed. Unclip the wiring harness from the old thermistor. Clip the new W10384183 thermistor into the same position, and reconnect the wiring harness fully, making sure the probe is positioned exactly as the original was. Reinstall the interior panel. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling and normal defrost cycling have returned. Tools needed: sockets, screwdriver, multimeter (for testing the old sensor), work gloves. Frequently Asked Questions My freezer feels cold but the refrigerator side isn't cooling. Is this the part I need? Yes, this is a documented pattern tied to this thermistor. One customer described their evaporator coils and fins as "overly freezing," which blocked cool air from reaching the refrigerator compartment even though the freezer itself was fine. Replacing this thermistor, after first defrosting the iced-over coils, resolved the issue. My refrigerator isn't defrosting properly. Could this be the cause? Yes, this is a documented symptom. One customer specifically described their unit "not defrosting" and resolved it by replacing this sensor, calling the repair "very straightforward." Since this thermistor feeds temperature data into the defrost cycle on many models, a failing sensor can prevent the defrost system from operating correctly. Do I need to defrost the coils before replacing this part? If your evaporator coils are heavily frosted or iced over, yes — clear that ice first so you can properly access and route the new thermistor, and so you can accurately judge whether the repair has resolved the airflow problem once everything is back together. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the sensing function, probe design, and wiring harness configuration of the original WPW10384183 thermistor used in compatible Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WR50X60 Refrigerator Genuine OEM Defrost Thermostat – For GE, Hotpoint, and Kenmore Product Overview The WR50X60 Refrigerator Defrost Thermostat is a genuine OEM part designed to regulate the defrost cycle by monitoring the temperature near the evaporator coils. When the temperature drops to a preset level, the thermostat activates the defrost heater to melt frost and maintain proper airflow. A faulty defrost thermostat can cause excessive frost buildup and cooling problems. This OEM replacement ensures reliable operation and is ideal for long-term use in compatible refrigerator models. Replaces Part Numbers This OEM thermostat replaces WR50X60, 3489, WR23X5030, WR50X0005, WR50X0007, WR50X0010, WR50X0011, WR50X0017, WR50X0021, WR50X0023, WR50X0026, WR50X0027, WR50X0036, WR50X0060, WR50X0076, WR50X0077, WR50X0089, WR50X0091, WR50X0093, WR50X0101, WR50X0105, WR50X0107, WR50X0110, WR50X0111, WR50X0115, WR50X0125, WR50X10, WR50X101, WR50X105, WR50X107, WR50X11, WR50X110, WR50X111, WR50X115, WR50X125, WR50X17, WR50X21, WR50X23, WR50X26, WR50X27, WR50X36, WR50X5, WR50X5009, WR50X5026, WR50X7, WR50X76, WR50X77, WR50X89, WR50X91, WR50X93, AH303547, EA303547, AP2071242, PS303547. It offers a direct fit and performance consistent with original factory-installed components. Compatible Brands Compatible with GE, Hotpoint, and Kenmore refrigerators made by GE. It fits various top-freezer, bottom-freezer, and side-by-side models that use this thermostat in their defrost systems. Fixes the Following Issues Frost accumulation in freezer Refrigerator not defrosting Blocked airflow due to ice Inconsistent cooling performance Why Buy from Parts‑O‑Matic 100% genuine OEM part for guaranteed compatibility Fast and free shipping throughout the U.S. Trusted by appliance technicians and DIYers Hassle-free returns and responsive support

Read more less

Genuine OEM 316233903 Oven Temperature Sensor The Genuine OEM Frigidaire 316233903 is the oven temperature sensor (probe) for select Frigidaire, Kenmore, Tappan, Crosley and White-Westinghouse gas and electric ranges. The sensor constantly monitors the temperature inside the oven and sends signals to the control board, which uses them to hold the set temperature for baking, roasting and broiling. When it fails, the oven may not heat properly, may not hold temperature, or may run too hot. This is the original Frigidaire part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering, and compare the sensor's plug with your old one, because connectors can differ. Quick Answer The Genuine OEM 316233903 Oven Temperature Sensor replaces the oven sensor probe on a compatible range when it has failed. Replaces 316217008, 316233900 and 316233902. Classic symptoms: little or no heat when baking, uneven heating, an oven that runs too hot, or an oven that won't start. Common Problems This Part Fixes Little or no heat when baking Oven not heating evenly Oven running too hot Oven won't start Inaccurate oven temperature Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This oven temperature sensor replaces or supersedes the following part numbers: 316233903 replaces 316217008, 316233902, 316233900, AFR16108, AP5998652, OEM17995965, PD00027614, PS11731754 If your old sensor shows a different number, contact our support team and we'll check whether it matches. Compatibility This oven temperature sensor is listed for Frigidaire, Kenmore, Tappan, Crosley and White-Westinghouse gas and electric ranges, including these examples: Frigidaire CFEF3043RSD, CFEF3043RSC, CWEF3007TWB, FFLF3049SSB, FFGF3052TSA, TGF328GSF Crosley CRG3150SSA, CRG3150SSB, CCRE3530LWG White-Westinghouse WWEF3001TWA, WWGF3008TWA, WWGF3008TWB Kenmore 79073033314, 79073033315, 79073033316, 79061750100 Note: The models above are a sample, not a full list. This sensor may require cutting and splicing the wire connector, and some buyers report that the plug on their range did not match, so compare it with your old sensor. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Genuine OEM Frigidaire part, not an aftermarket equivalent Monitors oven temperature and signals the control board Replaces three earlier Frigidaire sensor part numbers Sold individually Product Specifications Part Number 316233903 OEM Part Number 316233903 Part Type Oven Temperature Sensor (Probe) Condition Genuine OEM Manufacturer Frigidaire Quantity 1 Sensor Application Select Gas and Electric Ranges Installation Notes ⚠️ Disconnect Power Before Installing Unplug the range or shut off its circuit breaker, let the oven cool, and wear work gloves. Pull the range out to reach the back panel, remove the panel, then unscrew the old sensor and disconnect its wiring. Mount the new sensor in the same position and reconnect the wiring. Note: this sensor may require cutting and splicing the wire connector. If the plug differs from your old one, cut the connector and splice the wires with porcelain wire nuts. Refit the panel, restore power, and check oven temperature accuracy. Frequently Asked Questions My oven isn't heating right. Is the sensor the problem? It can be, but not always. Some customers found the real fault was the igniter, bake element or control board. Test the sensor and check those parts before replacing it. Is this an OEM or aftermarket part? This is a genuine OEM part from Frigidaire, not an aftermarket equivalent. Will I need to cut and splice the wire connector? Yes, it may. This sensor may require cutting and splicing the wire connector, depending on your range. Compare your old sensor with this one before ordering. Customers have spliced the wires with porcelain wire nuts when the plug differed. Contact our support team if you are unsure. Will this fit my range? It is listed for many Frigidaire-built models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

4TM-C12 Refrigerator / Freezer Compressor Overload 1/2 HP Refrigerator / Freezer Thermal Overload Protector 1/2 HP (375W) - 110V 4TM-C Replaces Part Numbers: 6750C-0004R, AP4651578, PS3529535, 6750C-0005P, AH3529540, EA3529540, AP4439459, PS3529540.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO LA1053 Dryer Thermostat Kit – Replaces LA-1053 – Compatible with Whirlpool, Maytag, Admiral, and Amana Dryers Product Description Restore proper dryer temperature control with the XPARTCO LA1053 Dryer Thermostat Kit. This Dryer Thermostat Kit is a replacement part for specific Maytag, Whirlpool dryer models. This kit includes a high-limit thermostat and a thermal fuse, both of which are crucial for regulating the dryer’s temperature. The high-limit thermostat prevents the dryer from overheating, while the thermal fuse will cut off power if a critical temperature is exceeded, ensuring safety. The kit includes a high-limit thermostat (53-0771) and two thermal fuses. 53-1096 (blue dot for Gas) 53-1182 (Red dot for Electric) Replaces Part Numbers LA-1053, 3344, 53-0143, 53-0170, 53-0261, 53-1133, 53-1526, AH2162282, EA2162282, ERLA1053, ET403, ET405, K35-601, LA-1053VP, LA1053, SET405, TJ90SET405, 531526, 531182, 531133, 530261, LA1053, 530143, WP53-1182, 53-1182, 53-0143, 53-1096 , L248-80F, PD00002446, EAP2162282, AP4242472, PS2162282, WP53-0771, 53-0771, 1422, 53-0306, 53-1037, 53-1459, ER53-0771, SET176, TJSET176, AP6009638, PS11742806, WP53-1096, 53-1096, 4434853, AP6009640, PS11742808.  Compatibility This replacement thermostat kit fits select Whirlpool, Maytag, Admiral, and Amana dryers. Example compatible models include (but are not limited to): Maytag DE303, Whirlpool LDE8824ACE, and Amana LEA30AW. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Compatibility – Compatible with Whirlpool, Maytag, Admiral, and Amana dryers 🔥 Complete Kit – Includes cycling thermostat, high-limit thermostat, and thermal fuse. Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.  💰 Cost-Effective Repair – Replaces multiple components in one package 🛠️ Easy to Install – Direct-fit parts require only basic tools 🛡️ Fixes Common Issues – Resolves dryers not heating, overheating, or shutting off early 📐 Product Specification Part Number: LA1053 Component Type: Dryer Thermostat and Thermal Fuse Kit Material: Heat-resistant metal with high-quality electrical connectors Mounting: Direct-fit replacement on heater housing and blower housing Operating Conditions: Designed for residential electric dryers Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock. Steps: Unplug the dryer and remove the rear access panel. Locate the thermostat and thermal fuse on the heater housing. Remove screws securing the old components and disconnect wires. Install the new thermostats and fuse from the XPARTCO LA1053 kit. Reconnect wiring, reinstall the back panel, and restore power. Run a test cycle to confirm proper heating and temperature control. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Get your dryer running safely and efficiently again — Add to Cart Now for a reliable, budget-friendly repair kit!

Read more less

DA31-00103A Genuine OEM Refrigerator Condenser Fan Motor - Compatible with Samsung Product Description Ensure efficient cooling with the DA31-00103A Genuine OEM Refrigerator Condenser Fan Motor. This Samsung-manufactured motor is designed as a replacement for select Samsung refrigerators. It powers the fan to circulate air over the condenser coils, dissipating heat to maintain optimal refrigeration performance. This part addresses issues like insufficient cooling, frost buildup, unusual noises (e.g., chirping, buzzing), or the refrigerator running too frequently, often caused by a faulty or worn motor. Note: Includes (1) condenser fan motor (fan blade not included). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: DA31-00103A, IS-27210SCD6A, PD00002207, EAP4138348m AP4140906, 1472692, PS4138348. Compatibility: Compatible with select Samsung refrigerator models, including but not limited to: Samsung: RS2631SL, RS2631SL/XAA, RS2623WW/XAA, RS2624SW, RS2624SW/XAA, RS2624WW, RS2631SW, RS2631SW/XAA, RSC5DBSH, RS2621SW/XAA, RS2623BB, RS2623BB/XAA, RS2623SH, RS2623SL, RS2623VQ, RS2630SH, RS2630WW Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung refrigerators. 🔧 Specifications: Genuine OEM Samsung AC fan motor, 115V, 60Hz, 0.16A, 1300RPM, 1-5/8" shaft. 💪 Reliable Performance: Circulates air to dissipate heat from condenser coils for efficient cooling. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves insufficient cooling, frost buildup, noisy operation, or frequent running. Product Specification Part Number: DA31-00103A Component Type: Refrigerator condenser fan motor Material: Metal and plastic Electrical Specs: 115V, 60Hz, 0.16A, 1300RPM, 1-5/8" shaft, quick disconnect Compliance: UL-listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today! Add to cart now for a reliable fix!

Read more less

240597220 Genuine OEM Frigidaire Refrigerator Temperature Sensor The 240597220 is a Genuine OEM Frigidaire replacement refrigerator temperature sensor compatible with a wide range of Frigidaire, Electrolux, Kenmore (253/106/795 prefix), Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators and household freezers. This NTC (negative temperature coefficient) thermistor continuously monitors the temperature inside the refrigerator or freezer compartment and sends resistance-based readings to the main control board, which uses this data to cycle the compressor, fans, and defrost heaters to maintain accurate temperatures. As the thermistor heats up or cools down, its electrical resistance changes predictably, allowing the control board to calculate the exact temperature in real time. When this sensor fails or drifts out of range, the refrigerator may run too cold or too warm, cycle excessively, freeze up the evaporator, fail to maintain set temperatures, or display OP error codes. Rated 10K Ohm NTC, with a 5/16" diameter probe, 12" wire, and overall dimensions of 3-5/8"L x 5/8"W x 5/16"H (sensor probe itself measures ~1-3/16"L x 5/16" diameter). Compatible with 20-28 cubic foot North American household refrigerators in French door, side-by-side, top-freezer, and bottom-freezer configurations (post-2005 production). 240597220 is the current OEM part number, superseding 240597203, 240597201, and 240597202. It also replaces 7240597203, AP4032998, AP7243155, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, and PS17647917. Not compatible with mini fridges, car refrigerators, commercial units, wine coolers, or ice makers. Installs in 15–20 minutes with basic hand tools. Quick Answer The 240597220 Genuine OEM Frigidaire Refrigerator Temperature Sensor fixes Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators that run too cold or warm, cycle excessively, freeze up the evaporator, or display OP error codes. NTC thermistor — 10K Ohm at room temperature. 5/16" probe diameter, 12" wire. Overall 3-5/8"L x 5/8"W x 5/16"H. Genuine OEM. Supersedes 240597203, 240597201, 240597202. Also replaces 7240597203, AP4032998, AP7243155, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, PS17647917. For 20–28 cu ft household refrigerators built 2005 or later. Common Problems This Part Fixes Refrigerator running too cold or too warm — sensor not accurately reporting temperature Inconsistent temperatures — fluctuating cooling that can't maintain set point OP error code displayed on the control panel (open sensor circuit) Excessive frost or ice buildup on evaporator coils from erratic defrost timing Refrigerator running continuously without cycling off Freezer over-freezing food or fresh food compartment freezing groceries Food spoilage from temperature instability Multimeter test shows 0 ohms (shorted), infinite resistance (open), or drifted resistance instead of the expected ~10K Ohms at room temperature Replaces Part Numbers This temperature sensor is the current OEM part number and supersedes the following OEM and cross-reference part numbers: 240597220, 240597203, 240597201, 240597202, 7240597203, 4985585, AFR15666, AP7243155, EAP17647917, OEM21729474, PD00088922, PS17647917. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select household refrigerators and freezers from the following brands (20–28 cu ft, built 2005 or later): Frigidaire refrigerators — Gallery and Professional series, plus standard Frigidaire models (BFHS2611LM, BGHS2634KE, BGHS2634KP, BGHS2644KF, CRSH237LB, PRFG2383AF, PRFC2383AF, ERFG2393AS2, FRSS2323AS8, FFHB2740PP5A and many related models) Frigidaire upright freezers — FFFH21F7QW, FGU19F6QWB and related models Electrolux refrigerators — EI24RD65KS0, EI24RD65HS0, EI24RD65HS1, E24RD75KPS0 and related models Kenmore / Sears refrigerators — 253-prefix, 106-prefix, and 795-prefix models (select Frigidaire/Electrolux-built units) Crosley refrigerators (select Frigidaire-built models) White-Westinghouse refrigerators (select models) Kelvinator refrigerators (select models) Gibson refrigerators (select models) Tappan refrigerators (select models) Viking refrigerators (select Frigidaire-platform models) Ikea refrigerators (select Frigidaire-platform models) Not compatible with: mini fridges, car refrigerators, commercial refrigerators/freezers, wine coolers, or dedicated ice makers. Verify your refrigerator was produced after 2005 and check the original part number on the fridge nameplate matches one of the cross-references listed. Contact our support team with your model number if you're unsure. Key Features NTC (negative temperature coefficient) thermistor — resistance changes predictably with temperature, allowing precise temperature monitoring Rated 10K Ohms at room temperature (approximately 25°C / 77°F) Sends real-time temperature data to the main control board to regulate compressor cycling, fan operation, and defrost timing Sensor probe: 5/16" diameter x 1-3/16" length · Overall assembly: 3-5/8"L x 5/8"W x 5/16"H · 12" wire lead White plastic/metal construction with glossy finish Resolves OP error codes when caused by an open sensor circuit Compatible with 20–28 cu ft French door, side-by-side, top-freezer, and bottom-freezer refrigerators built 2005 or later Current OEM part number — supersedes 240597203, 240597201, 240597202 and replaces AP4032998, AH1765215, PS1765215, PS17647917 and additional cross-references Compatible with Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications — guaranteed fit and performance Quick DIY repair — installs in 15–20 minutes with basic hand tools Product Specifications Part Number 240597220 Supersedes 240597203, 240597201, 240597202 Part Type Refrigerator Temperature Sensor (NTC Thermistor) Condition Genuine OEM Application Household Refrigerators and Freezers (Frigidaire/Electrolux platform, 20–28 cu ft, 2005+) Sensor Type NTC (Negative Temperature Coefficient) Resistance 10K Ohms at room temperature Probe Dimensions 5/16" Diameter x 1-3/16" Length Overall Dimensions 3-5/8"L x 5/8"W x 5/16"H Wire Length 12" Color White Finish Glossy Material Plastic / Metal Error Codes Resolved OP (open sensor circuit) Compatible Brands Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Depending on your refrigerator model, the fresh-food temperature sensor is typically located behind the air tower or damper assembly on the rear interior wall of the refrigerator compartment; the freezer temperature sensor is typically located behind the rear freezer access panel near the evaporator coils. Confirm which sensor location matches your symptom and the parts diagram for your specific model before starting. Remove all shelves, drawers, and any items blocking access to the sensor location. Remove the screws holding the air tower/damper cover (fresh food side) or rear freezer access panel to expose the sensor. Photograph the sensor position, wire routing, and connector before removing. Disconnect the wire connector (gently — the connector can be fragile) and release the sensor from its mounting clip. Fully insert the new 240597220 sensor probe into the card slot (no exposure) and secure with the mounting clip. Reconnect the wire connector — plug wiring terminals tightly to avoid poor contact. Use cable ties to secure any loose wire routing as before. Reinstall the cover or panel, replace the shelves and drawers, and plug the refrigerator back in. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, cable ties, multimeter (for testing), work gloves. Frequently Asked Questions What does OP error code mean on my Frigidaire refrigerator? The OP error code (Open) indicates the control board is detecting an open circuit on a temperature sensor input — meaning the sensor is failing to send a resistance signal, either because the sensor itself has failed open internally, the wire has broken, or the connector isn't seated. Replacing the temperature sensor typically resolves the code when the sensor itself is the cause. If the code persists after replacement, check the wire harness between the sensor and the control board for damage, and confirm the connector is fully seated. If the OP code appears alongside other symptoms like frost buildup and cooling issues that persist after sensor replacement, the defrost temperature sensor (on the Harness-Low Side, a different part number) may also need to be replaced, or the main control board may be at fault. How do I test if the temperature sensor has failed? Unplug the refrigerator, disconnect the sensor's wire connector, and set your multimeter to resistance mode. At room temperature (approximately 25°C / 77°F), a working NTC thermistor should read approximately 10K Ohms. If the sensor reads 0 ohms, it has shorted internally. If it reads infinite resistance (open circuit, often shown as "OL" on the multimeter), the sensor has failed open. If it reads significantly off from 10K (for example 8.4K or 5K at room temp), the sensor has drifted and is no longer providing accurate readings — replacement is recommended. Any of these results confirms the sensor needs replacement. My refrigerator has multiple temperature sensors — which one do I replace? Frigidaire refrigerators typically use multiple temperature sensors: one in the fresh food compartment (behind the air tower/damper), one in the freezer compartment (near the evaporator coils), and often a separate defrost temperature sensor on the Harness-Low Side. The 240597203 is used as the fresh food or freezer compartment temperature sensor. If your symptom is "fresh food too warm" or "freezer over-freezing," the fresh food sensor is the likely candidate. If your symptom is "freezer icing up despite defrost heater working," the defrost temperature sensor may be the culprit — a different part number. Check your refrigerator's parts diagram to confirm the correct sensor location for your specific symptom. Does this sensor fit my Kenmore refrigerator? On many Kenmore refrigerators, yes — Sears sells Kenmore-branded refrigerators that are manufactured by Frigidaire/Electrolux, Whirlpool, LG, and Samsung. The 240597203 sensor fits Kenmore refrigerators with model numbers beginning with the 253, 106, or 795 prefixes that are Frigidaire/Electrolux-built. Kenmore refrigerators built by other manufacturers (Whirlpool, LG, Samsung) use different sensors. Check the first three digits of your Kenmore model number — if it's 253, 106, or 795 and falls within the compatible model list, this is the correct part. Is this an OEM or aftermarket part? This is a Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications. It is the exact same temperature sensor installed in compatible Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

WR60X26866 Genuine OEM GE Refrigerator Axial Evaporator Fan Motor The WR60X26866 is a Genuine OEM GE replacement axial evaporator fan motor manufactured by GE to factory specifications, designed as a direct fit for the fresh food section of select GE French door refrigerators, including the CFE28, CFE29, CWE23, CYE22, CYE23, DFE28, DFE29, GFD28, GFE26, GFE27, GFE28, GFE29, GFS26, GFS28, GNE26, GNE29, GYE22, GYS22, PFD28, PFE28, PFE29, PWE23, PYD22, PYE22, PYE23, and ZWE23 series. The evaporator fan motor pulls air through the evaporator coils to remove heat from the circulating air inside the refrigerator. Without a functioning evaporator fan, the refrigerator compartment cannot maintain its target temperature even when the compressor and condenser are running normally — the cold air generated at the evaporator simply isn't being circulated to the food storage areas. The WR60X26866 is a DC motor rated at 13.6V DC, 0.16A, with a fan housing measuring 3-4/7"L x 2"W x 3-1/8"H, plus a multi-color wire harness and plug approximately 11-1/2" long. It includes the axial fan blade and harness as a complete assembly. It directly replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, and PS12172983. Important: if your refrigerator was built between May 2014 and March 2015 with serial range FF–HD, the unit's software must be updated before installing this fan motor — see FAQ below. Installs in 20–30 minutes with basic hand tools. Quick Answer The WR60X26866 Genuine OEM GE Refrigerator Axial Evaporator Fan Motor fixes GE French door refrigerators where the fridge isn't cooling but the freezer is cold, the evaporator coils are frosted over, the ice maker isn't working due to insufficient cooling, or there's loud humming or grinding from the freezer area. Axial fan motor, 13.6V DC, 0.16A. Fan housing: 3-4/7"L x 2"W x 3-1/8"H; harness ~11-1/2"L. Replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, PS12172983. Note: May 2014 – Mar 2015 build refrigerators (serial range FF–HD) require a software update before installation. Common Problems This Part Fixes Refrigerator not cooling properly while the freezer remains cold — classic evaporator fan failure Freezer cold but fridge warm — fresh food compartment air not being circulated Frosty or frozen evaporator coils due to insufficient air circulation Ice maker failure caused by inadequate cooling in the compartment Loud humming, grinding, or buzzing noise from the freezer or fresh food compartment Refrigerator running continuously without reaching set temperature Fan blade not spinning freely or seized when checked by hand Multimeter shows no continuity through the motor windings Replaces Part Numbers This evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select GE French door refrigerators, including: GE refrigerators — CFE28, CFE29, CWE23, CYE22, CYE23 series (CFE28TP2MBS1, CFE28USHNSS, CWE23SP2MBS1, CYE22TP2MBS1 and related) GE refrigerators — DFE28, DFE29 series (DFE28JELCDS and related) GE refrigerators — GFD28, GFE26, GFE27, GFE28, GFE29 series (GFD28GBLBTS, GFE26GGHEBB and related) GE refrigerators — GFS26, GFS28, GNE26, GNE29 series GE refrigerators — GYE22, GYS22 series (GYE22HMKEES and related) GE refrigerators — PFD28, PFE28, PFE29 series (PFE28KELFDS and related) GE refrigerators — PWE23 series (PWE23KSKDSS and related) GE refrigerators — PYD22, PYE22, PYE23 series (PYE22KSKBSS and related) GE refrigerators — ZWE23 series and select related Café and Profile French door models Important — Software Update Requirement: If your GE refrigerator was manufactured between May 2014 and March 2015 with a serial number in the range FF–HD, the refrigerator's control software must be updated by GE factory service (or via Software Update Module WR98R882802) before installing this fan motor. Installing the new motor without the software update on these affected units may result in improper performance. Check your refrigerator's serial number plate before ordering. Key Features Axial evaporator fan motor for the fresh food section of GE French door refrigerators Pulls air through the evaporator coils to remove heat and circulate cold air through the refrigerator compartment DC motor — rated 13.6V DC, 0.16A — runs on DC voltage from the refrigerator control board Includes the axial fan blade and pre-attached multi-color wire harness with plug Fan housing dimensions: 3-4/7"L x 2"W x 3-1/8"H; harness and plug approximately 11-1/2" long Quiet operation — engineered to minimize hum and vibration in the refrigerator cabinet Plastic and metal construction, black housing with multi-color harness Replaces an extensive list of GE part numbers including WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, and additional cross-references Compatible with GE, GE Café, and GE Profile French door refrigerators in the CFE, CWE, CYE, DFE, GFD, GFE, GFS, GNE, GYE, GYS, PFD, PFE, PWE, PYD, PYE, and ZWE series Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number WR60X26866 Part Type Refrigerator Evaporator Fan Motor (Fresh Food / Axial) Condition Genuine OEM Application GE French Door Refrigerators Voltage 13.6V DC Amperage 0.16A Fan Type Axial Fan Housing Dimensions 3-4/7"L x 2"W x 3-1/8"H Harness Length Approximately 11-1/2 inches Color Black housing with multi-color harness Material Plastic / Metal Includes Axial fan motor assembly with harness Software Update Required For May 2014 – Mar 2015 builds (serial range FF–HD) — use WR98R882802 Compatible Brands GE, GE Café, GE Profile Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor for the fresh food section is mounted on the back wall of the fresh food (refrigerator) compartment, behind an access panel. Take a photo of the existing fan position and wire harness routing before disconnecting. Remove the shelves and any internal components blocking access to the back wall, then remove the screws holding the rear access panel in place. Disconnect the fan motor's wire harness connector and remove the mounting screws securing the old motor. Note the fan blade orientation on the motor shaft. Install the new WR60X26866 motor assembly in the same position with the blade facing the same direction, reconnect the wiring harness, and reinstall the mounting screws and access panel. Replace the shelves and other internal components, restore power, and confirm the fan spins and the refrigerator cools properly. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves. Frequently Asked Questions My fridge is warm but my freezer is cold — is the evaporator fan motor the problem? Yes — this is one of the most recognizable symptoms of evaporator fan motor failure on GE French door refrigerators with a separate fresh food evaporator. The freezer side has its own cooling circuit and remains cold, while the fresh food side relies on this fan to circulate air across its evaporator coils. When the fan fails, the freezer continues working but the fresh food compartment loses its cold air supply, warming up while the freezer stays at temperature. If you also notice frost building up on the evaporator coils behind the back panel of the fresh food compartment, the fan failure is confirmed. What is the software update requirement for May 2014 – March 2015 refrigerators? GE issued a software update for certain refrigerators manufactured between May 2014 and March 2015 (serial range FF–HD) before they could properly support newer revisions of the WR60X26866 evaporator fan motor. If your refrigerator falls in this date and serial range, the control software must be updated before installing this fan motor — either by GE factory service or by using the Software Update Module part WR98R882802. Installing the new fan on an unupdated unit can result in improper performance. Check the serial number plate inside your refrigerator (typically on the left side wall) to confirm whether your unit is affected. Refrigerators built outside this range do not require the update. How do I test if the evaporator fan motor has failed? Unplug the refrigerator, then access the fan behind the rear panel of the fresh food compartment. First, try turning the fan blade by hand — if it doesn't spin freely, is stiff, or seizes, the motor bearing has failed. Next, listen during normal operation — if the motor is unusually noisy or makes a grinding sound, the bearings are worn even if it still spins. Finally, with the unit unplugged and the motor disconnected, use a multimeter on the motor windings to check for continuity. If the windings show no continuity, the motor has failed electrically. Also check for approximately 11–14V DC at the connector when the refrigerator is running — if voltage is present but the motor doesn't spin, the motor has failed. My fridge has two evaporator fans — which one does this replace? Some GE French door refrigerators have separate evaporator fan motors for the freezer and the fresh food sections. The WR60X26866 is the fresh food evaporator fan motor — it's the axial fan located behind the rear panel of the fresh food compartment, not in the freezer. If your symptom is "freezer cold, fridge warm," this is the correct part. If your symptom is "freezer warm" or "ice maker not making ice but fridge is fine," the freezer evaporator fan motor (a different part number) is more likely the cause. Confirm which compartment has the cooling problem before ordering. Is this an OEM or aftermarket part? This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same axial evaporator fan motor installed in compatible GE, GE Café, and GE Profile French door refrigerators from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor The EAU61524007 is a genuine LG OEM evaporator fan motor for LG and select Kenmore refrigerators. This motor circulates air over the evaporator coil and distributes that cooled air into the fresh food and freezer compartments in a balanced way, which is what keeps temperatures even throughout the refrigerator and helps prevent frost from building up on the coil. DC-powered, white in color, with an assembled height of approximately 1 inch. Over time, the motor's bearings can wear out, or general electrical failure can set in from years of continuous cycling. A failing evaporator fan motor produces a wide range of symptoms since it affects both compartments and the defrost system: the refrigerator may not start at all, either compartment may run too warm or too cold, or frost buildup may appear where it shouldn't. Unusual noise from the freezer is another common early sign of a struggling motor. It directly replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349. Quick Answer The EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor fixes LG and select Kenmore refrigerators that won't start, run too warm or too cold in either compartment, or show frost buildup where it shouldn't be. DC motor, white, approx. 1" assembled height. Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, PD00006349. Not the same as the similarly-numbered EAU61524002 motor (DC13V, 0.265A, 3.5W) — confirm you have the exact number before ordering. Common Problems This Part Fixes Refrigerator won't start Refrigerator compartment running too warm Refrigerator compartment running too cold Freezer compartment running too warm Freezer compartment running too cold Frost buildup where it shouldn't be occurring Unusual noise from the freezer indicating a struggling fan motor Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers: EAU61524007, EAU60694510, 3286319, AP5950081, EAP10058947, PS10058947, ALG54568, PD00006349 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select LG refrigerators, and also fits select Kenmore and Kenmore Elite refrigerators built on the LG platform, including model numbers such as LFX31915SW, LFX25992ST, and GRL318LSJP. Note — not the same as EAU61524002: A similarly-numbered part, EAU61524002, is a separate LG evaporator/freezer fan motor rated DC13V, 0.265A, 3.5W, used on different models. Always verify your full model number and match the exact part number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs. Key Features Genuine LG OEM part — factory-specified motor design and airflow performance Circulates air over the evaporator coil and distributes it evenly to both compartments Resolves "won't start," "running too warm or too cold," and "frost buildup" symptoms caused by fan motor failure DC-powered motor White finish, approximately 1" assembled height Direct drop-in replacement matching the original mounting and blade fitment Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349 Compatible with LG and select Kenmore refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number EAU61524007 Part Type Refrigerator Evaporator Fan Motor Condition Genuine OEM Brand LG Function Circulates air over the evaporator coil to both compartments Power Type DC Color White Assembled Height Approx. 1 in. Quantity 1 fan motor Compatible Brands LG, Kenmore, Kenmore Elite Installation Notes ⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new EAU61524007 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My refrigerator won't start at all. Could this really be the fan motor? Yes, this is one of the documented symptoms for this part on LG's own service guidance. Because this motor is tied into the refrigeration and defrost circuit, a failure here can present as the unit not starting at all, in addition to the more expected symptoms like temperature problems or noise. That said, other components can produce a similar no-start symptom, so it's worth confirming this diagnosis if you're not fully certain. Both compartments are running warm, not just one. Does that still point to this motor? Yes. Since this motor is responsible for distributing cooled air to both the fresh food and freezer compartments from the evaporator coil, a failure here can affect both areas simultaneously rather than just one, unlike some other fan motor designs that mainly affect the compartment further from the coil. How do I make sure I'm ordering this exact motor and not a similar one? Check the part number printed directly on your old motor if it's legible, or confirm your refrigerator's full model number against the compatibility list. LG has released similarly-numbered motors, such as EAU61524002, that serve different models and have different electrical specifications, so matching by number is more reliable than matching by general appearance. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, blade fitment, and mounting configuration of the evaporator fan motor originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

W10861170 Refrigerator Genuine Diffuser Replaces Part Numbers: W10861170, 4459449, OEM23997962, AP5999490, PS11731574, W10633587. Description: This air diffuser is an OEM part for select Whirlpool refrigerators. This air diffuser is responsible for evenly distributing cool air throughout the refrigerator compartment.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO DA32-00024W Refrigerator Temperature Sensor The XPARTCO DA32-00024W is an aftermarket replacement temperature sensor for Samsung refrigerators. This sensor senses the temperature inside the refrigerator and sends that information to the electronic control board, which uses it to regulate cooling and, on many models, manage the defrost cycle. The manufacturer designation for this sensor is "SENSOR TEMP;NW2,5V,R-DEF," indicating its role in the defrost-related temperature monitoring circuit. Over time, the sensor's electronics can drift out of calibration or fail outright from age or moisture exposure. A failing sensor typically shows up as inconsistent cooling, temperatures that run warmer or colder than the set point, or increased energy consumption as the refrigerator's control struggles to compensate for inaccurate temperature readings. It directly replaces AP5579174, 3955001, and PS4138632. Quick Answer The XPARTCO DA32-00024W Refrigerator Temperature Sensor fixes Samsung refrigerators with inconsistent cooling, temperatures running warmer or colder than expected, or increased energy consumption. Replaces AP5579174, 3955001, PS4138632. This sensor is tied to defrost-related temperature monitoring on many models — if you're also seeing frost buildup or defrost cycle issues, this sensor is worth checking alongside the defrost thermostat or heater. Common Problems This Part Fixes Inconsistent cooling in the refrigerator or freezer compartment Temperature running warmer or colder than the set point Increased energy consumption from the refrigerator overcompensating Temperature fluctuations affecting food freshness Defrost cycle irregularities on models where this sensor is part of that circuit Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers: DA32-00024W, 3955001, AP5579174, ASM30135, EAP4138632, PD00030760, PS4138632. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select Samsung refrigerators, including model numbers RS25H5111SR and RF4287HARS. Note: Samsung uses several different temperature sensors across its refrigerator lineup, including sensors for different compartments and functions. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which sensor your refrigerator needs. Key Features Aftermarket replacement temperature sensor — monitors internal refrigerator temperature Resolves "inconsistent cooling," "temperature off target," and "high energy use" symptoms caused by sensor failure Reports temperature data to the electronic control board for cooling and defrost regulation Direct drop-in replacement — no modification required Replaces AP5579174, 3955001, and PS4138632 Compatible with Samsung refrigerators Aftermarket replacement built to OEM-equivalent quality standards Straightforward installation Product Specifications Part Number XPDA32-00024W OEM Part Number DA32-00024W Part Type Refrigerator Temperature Sensor Condition Aftermarket Replacement Brand XPARTCO Manufacturer Designation SENSOR TEMP;NW2,5V,R-DEF Function Senses internal temperature and reports to the electronic control Repair Difficulty Easy Quantity 1 temperature sensor Compatible Brand Samsung Installation Notes ⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator and safely store any food that could spoil while the power is off before installing this part. Wear work gloves to protect your hands. Locate the old temperature sensor per your model's service diagram, since its position varies by refrigerator model. Photograph the wiring connection before disconnecting anything. Disconnect the wiring harness from the old sensor, remove any mounting clips or fasteners holding it in place, and pull it free. Install the new DA32-00024W in the same position, reconnect the wiring harness fully, and secure any mounting hardware. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling has returned. Tools needed: Phillips screwdriver (model-dependent), work gloves. Frequently Asked Questions My refrigerator's temperature seems inconsistent. Is this the part I need? Yes, this is a common symptom of a failing temperature sensor. Since this sensor is what reports internal temperature to the control board, a drifting or failed sensor can cause the refrigerator to run warmer or colder than intended, or to cycle inconsistently as the control tries to work from inaccurate data. What does the "R-DEF" in this sensor's designation mean? This suggests the sensor plays a role in the refrigerator's defrost-related temperature monitoring on applicable models. If you're seeing frost buildup or defrost cycle problems in addition to general cooling inconsistency, this sensor is worth checking alongside other defrost system components, such as the defrost thermostat or heater. Is this a difficult repair? No, replacing this sensor is generally a straightforward repair once you've located its mounting position, which can vary by model. It typically involves disconnecting a wiring harness and removing a small mounting clip or fastener. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the sensing function, voltage reference, and mounting configuration of the original DA32-00024W sensor used in compatible Samsung refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

EAU63923601 Refrigerator Condenser Fan Motor - Compatible with LG, Haier, Kenmore/Sears Refrigerators Product Description Keep your refrigerator cool and efficient with the replacement EAU63923601 Refrigerator Condenser Fan Motor from Parts-O-Matic. This high-quality motor, designed for LG, Haier, and Kenmore/Sears refrigerators, circulates air across the condenser coil to dissipate heat, ensuring optimal cooling performance. Made with durable ABS plastic and metal components (DC 12V, 1A, 4-wire 4-pin), this motor addresses issues like overheating, noisy operation, poor cooling, or fan failure. Note: Includes one condenser fan motor. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement. Replaces part numbers: EAU63923601, ODM-001F-4A, LFXS26596S, 4877337, AP6317195, PS12383669, EAP12383669, PD00046601, EAU63923604 Compatibility: Compatible with models including but not limited to: LG: LFXS28968S, LFXS28968S/00, LMXS28626S, LMXS28626S/00, LFXS26596S, LRMDS3006S, LMWS27626S, LRFVS3006D Haier: Select models requiring EAU63923601 or compatible condenser fan motors Kenmore/Sears: Select models requiring EAU63923601 or compatible condenser fan motors Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Haier, and Kenmore/Sears refrigerator models. 🔥 Specifications: replacement condenser fan motor, DC 12V, 1A, 4-wire 4-pin connector, shaft length 46mm, shaft diameter 3mm, line length 72cm (28.34in), ABS plastic/metal construction, 3.15" x 3.15" x 2.76", 5.29 oz. 💰 Cost-Effective Alternative: replacement motor offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, work gloves; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves issues like refrigerator overheating, excessive noise, poor cooling, or fan failure. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Restore your refrigerator’s cooling efficiency today! Add to cart now for a budget-friendly fix!

Read more less