204698 Washer Door Lock
Replaces Part Numbers:204698, 213385, 2-4698, OEM20986763, AP6995586, PS2017106.
Description: This Lid Lock Kit is a replacement part for specific Speed Queen washing machine models. It is made up of lid lock components and mounting hardware that allow the washer lid to securely lock into place during operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 6501KW2002B Washer Rotor Position Sensor – Compatible with LG and Kenmore Washers
Product Description
Maintain smooth spin cycles and precise motor control with the XPARTCO 6501KW2002B Washer Rotor Position Sensor. This Sensor Assembly, also known as a hall sensor is a replacement Part and is a vital component in Specific LG, Kenmore washer Models. This part monitors the direction and speed of the spinning rotor. It then communicates this information to the electronic control board. By doing so, it aids in the precise operation of your washer. If your washer pumps but fails to spin or agitate, it may be indicative of a damaged sensor assembly.
Replaces Part Numbers
6501KW2002B, 6501KW2002A, AP7015078, PD00073205, EAP16556422, 4962510, PS16556422, EAP16556422.
Compatibility
This replacement rotor position sensor fits select LG and Kenmore front-load washers.
Example compatible models include (but are not limited to): LG WM2487HRM, LG WM0642HW, and Kenmore 796.40272900.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Aftermarket Replacement – Designed to match OEM performance and precision
Accurate Rotor Feedback – Helps regulate motor speed and direction for smooth washing
Cost-Effective Fix – Delivers OEM-level performance at a fraction of the price
Plug-and-Play Installation – No wiring modification required
Fixes Common Issues – Resolves LE, UE, SE, and spin cycle errors
Product Specification
Part Number: 6501KW2002B
Component Type: Washer Rotor Position Sensor (Hall Sensor)
Material: Durable printed circuit board with reinforced plastic housing
Mounting: Direct-fit installation on stator assembly
Operating Conditions: Rated for high-humidity, high-vibration washer environments
Compliance: Built to OEM-equivalent quality standards (not OEM)
Installation Notes
Tools Needed: 10 mm socket wrench, Phillips screwdriver
⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock.
Steps:
Disconnect power and remove the rear access panel.
Unscrew the rotor bolt and carefully remove the rotor assembly.
Locate and unplug the old sensor from the stator.
Install the new XPARTCO 6501KW2002B sensor, aligning mounting tabs.
Reconnect the wiring harness, reinstall the rotor, and secure the panel.
Restore power and run a spin test to verify correct operation.
⏱️ Time Required: 20–25 minutes
Shop With Confidence
Trusted Appliance Parts Supplier
30-Day Return Policy
Restore precise washer performance — Add to Cart Now for a reliable, budget-friendly repair!
EXPW79SC (4 Pack) Washing Machine Fill Hose Gasket with Screen
4 Pack
compatible with 5/ 8 inch washing machine and 3/4 inch garden hose
Fine Screen
the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively
134371220CM Washer Water Valve
Replaces Part Numbers: 134371220, WH13X10030, 1154728, AH1145692, EA1145692, OEM11533292, AP3844429, PS1145692.
Description: This Water Inlet Valve is a replacement part for specific Frigidaire washing machine models. This part controls the flow of hot and cold water into the washer's tub, ensuring the correct temperature mix for various wash cycles. By opening and closing at the command of the washer's control system, it plays a pivotal role in the machine's ability to execute programmed wash cycles with precision, affecting everything from the initial fill to the rinse phases. Causes for the replacement of the water inlet valve can range from mineral deposits and sediment build-up, which can obstruct the valve's flow, to mechanical wear and electrical failures affecting the valve's operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP WH01X10727 Washer Shock Absorber
Replaces Part Numbers: WH01X10727, 3029711, AP5793647, PS8756975.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
5220FR2006H Washer Hot Water Inlet Valve - Compatible with LG, Kenmore
Product Description
Ensure proper water flow with the replacement 5220FR2006H Washer Hot Water Inlet Valve. This replacement water inlet valve is designed for select LG and Kenmore front-load and top-load washers, featuring one solenoid to control hot water entry into the drum. It addresses issues like no water flow, leaks, improper filling, or error codes, offering a cost-effective alternative to OEM parts.
Note: Includes one water inlet valve with one solenoid. Disconnect power and water supply before installation. Check water supply lines and valve filters for blockages to ensure optimal performance.
Replaces part numbers: 5220FR2006H, 1268123, 5220FR1280F, 5220FR2006L, 5220FR2006Q, AH3527427, EA3527427, PD00001765, EAP3527427, AP4441935, PS3527427.
Compatibility:
Compatible with models including but not limited to:
LG: WM2016CW, WM2077CW, WM2277HW, WM2455HW, WM2487HRM, WM2601HW, WM2701HV, WM2801HWA, WM3070HWA, WM3470HWA, WM8000HVA, WM9000HVA
Kenmore: 796.40272800, 796.41022900, 796.41028900
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG and Kenmore front-load and top-load washers.
💧 Specifications: replacement water inlet valve with one solenoid, 120V, 60Hz.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves no water flow, leaks, improper filling, or error codes.
Product Specification
Part Number: 5220FR2006H
Component Type: Washer hot water inlet valve
Material: High-grade plastic and metal
Electrical Specs: 120V, 60Hz, one solenoid.
Mounting: Screw-mounted near washer water inlet
Operating Conditions: Suitable for high-pressure water supply environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source and water supply before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running smoothly today!
Add to cart now for a budget-friendly fix!
EXPW79SC (8 Pack) Washing Machine Fill Hose Gasket with Screen
8 Pack
compatible with 5/ 8 inch washing machine and 3/4 inch garden hose
Fine Screen
the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively
DD62-00084A Dishwasher Genuine OEM Water Valve
Description: This Water Valve is a Genuine OEM part compatible with specific Samsung dishwasher models. It is responsible for opening and closing the water supply to the dishwasher. It regulates the water pressure and ensures the proper amount of water is dispensed for each cycle. Causes of a faulty water valve can include wear and tear over time, sediment or debris buildup, electrical component failure, or damage due to high water pressure. These factors can result in issues such as inadequate water flow, leaks, or the dishwasher not filling or draining properly.
Replaces Part Numbers: DD62-00084A, AP5178218, PS4222448
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WD12X24058 Dishwasher Genuine OEM Detergent Dispenser
Detergent Dispenser
Fits select LG Dishwasher models.
Replaces Part Numbers: AGM75469801, AP6234070, PS12078829.
Description: This Detergent Module is a Genuine OEM part for select LG dishwasher models. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.
WH08X10024CM Washer Drive Belt
1300J7 Poly-V auto tension belt. 7 Rib.
Fits GE front load washers.
Replaces Part numbers:WH08X10024, 1168664, AH1020114, AP3884128, EA1020114, PS1020114.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W10240513 Washer Lid Lock Strike – Replaces WPW10240513 – Compatible with Whirlpool, Maytag & Kenmore Washers
Product Description
Restore proper lid locking function with the W10240513 Washer Lid Lock Strike. This replacement part attaches to the washer lid and engages with the lid lock assembly to ensure the washer detects when the lid is closed and can safely begin operation.
A damaged or broken lid strike can prevent the washer from starting, cause lid lock errors, or stop the spin cycle. Replacing it with this durable replacement part restores proper lid engagement and ensures smooth washer operation.
This part is designed to match original fit and function for reliable performance.
Replaces Part Numbers
WPW10240513, W10240513, AWP50167, PD00004624, 1873013, 045900191755, EAP11750882, AP6017583, PS11750882.
Compatibility
This replacement washer lid lock strike fits select Whirlpool, Maytag, Kenmore (Whirlpool-manufactured), Amana, and Roper washers.
Common compatible models include (but are not limited to):
Whirlpool WTW5000DW
Maytag MVWC565FW
Kenmore 110.22352510
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Direct Replacement Part – Matches OEM fit and function
🔒 Ensures Proper Lid Lock Engagement – Works with lid lock assembly
⚙️ Fixes Common Issues – Resolves lid lock errors and start failures
🧩 Simple Installation – Attaches easily to washer lid
💰 Cost-Effective Repair – Affordable solution for lid lock problems
⚠️ Symptoms
If your washer is experiencing any of the following issues, this part may need replacement:
❌ Washer will not start
🔒 Lid not locking properly
⚠️ Lid lock error codes
🔄 Cycle won’t begin or stops mid-cycle
🛑 Washer won’t spin
Replacing this lid strike can restore proper lid locking and washer operation.
📐 Product Specification
Part Number: W10240513
Component Type: Washer Lid Lock Strike
Material: Durable molded plastic
Application: Lid lock engagement system
Mounting: Snap-in or screw-mounted (model dependent)
Quality Level: Aftermarket replacement
🛠️ Installation Notes
Tools Needed: Screwdriver (if required)
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Basic Steps:
Disconnect washer power.
Locate the lid strike on the washer lid.
Remove the damaged strike.
Install the new W10240513 strike in place.
Ensure proper alignment with the lid lock assembly.
Restore power and test operation.
⏱️ Time Required: Under 10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Replacement Parts
🔄 30-Day Return Policy
Restore proper lid locking and washer performance — Add to Cart Now for a quick and easy fix!
