341241 Dryer Genuine OEM Drum Belt
The 341241 is a Genuine OEM dryer drum belt compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, and Ikea. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry.
Made from high-strength rubber with reinforced ribs, this belt measures 92-1/4 inches long x 1/4 inch wide and features 4 ribs and 3 grooves. It is flat on one side and ribbed on the other, and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It also replaces some 5-rib, 4-groove belts. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The 341241 Dryer Genuine OEM Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, and more. Measures 92-1/4" L x 1/4" W with 4 ribs and 3 grooves.
Common Problems This Part Fixes
Dryer drum not spinning — motor runs but drum stays still
Clothes not tumbling during the drying cycle
Thumping, squealing, or slapping noise during operation
Dryer runs but produces no heat because drum is stationary
Burning rubber smell coming from the dryer
Visible broken or frayed belt pieces found inside the dryer cabinet
Clothes taking too long to dry due to drum not rotating at correct speed
Replaces Part Numbers
This drum belt directly replaces the following OEM and cross-reference part numbers:
341241, 14210003, 2008, 26000341241, 26000349533, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 341241VP, 345473, 349533, 529597, 53-0186, 53-1080, 53-1086, 53-1528, 53-1589, 53-2671, 53-2910, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8206, 8210, 920H4, 920H5, 99906951, 99989673, 99989674, FSP341241, LB276, LB279, P46-037, P46-149, W10127457, W10131364, AH346995, AP32, EA346995, ER341241, AWP39161, PD00002263, EAP346995, AP2946843, PS346995, TJ341241.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (select models)
Maytag dryers
KitchenAid dryers
Amana dryers
Roper dryers
Admiral dryers
Jenn-Air dryers
Estate dryers
Magic Chef dryers
Crosley dryers
Inglis dryers
Norge, Modern Maid, Hardwick, Caloric, and Ikea dryers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle
92-1/4" length x 1/4" width — 4-rib, 3-groove design; flat on one side, ribbed on the other
Also replaces some 5-rib, 4-groove belts — wide cross-compatibility across Whirlpool-family models
Made from high-strength rubber with reinforced ribs — resists cracking, stretching, and heat damage
Direct replacement for OEM part numbers 341241 and 8066065 — no modification required
Compatible with over a dozen major appliance brands built on the Whirlpool platform
Genuine OEM part — factory-exact fit, materials, and dimensions
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Often replaced together with the idler pulley (691366) and drum rollers (349241T) for a complete drum drive repair
Product Specifications
Part Number
341241
Part Type
Dryer Drum Drive Belt
Condition
Genuine OEM
Application
Gas and Electric Dryers
Length
92-1/4 inches
Width
1/4 inch
Ribs
4 ribs, 3 grooves
Profile
Flat on one side, ribbed on the other
Material
High-strength rubber with reinforced ribs
Color
Black
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, Ikea
Often Replaced With
691366 Idler Pulley, 349241T Drum Rollers
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen, then unscrew the two Phillips screws inside the lint filter housing. Use a putty knife 2 inches from each front corner to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release belt tension at the idler pulley, lift the drum slightly, and slide the old belt off. Loop the new 341241 belt around the drum with the ribbed side facing down (toward the drum). Route the belt around the idler pulley and motor pulley — consult your model's service manual or a model-specific video for the correct belt path. Reassemble and run a test cycle. Tip: While the drum is out, inspect and replace the idler pulley (691366) and drum rollers (349241T) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
How does the 341241 differ from the W10205415 and 6602-001655 belts?
All three are 92-inch dryer drum belts, but they differ in width and rib count. The 341241 is 1/4" wide with 4 ribs and 3 grooves. The W10205415 is 3/8" wide with 5 ribs and 4 grooves. The 6602-001655 is 5/16" wide with 5 ribs and 4 grooves designed for Samsung dryers. Always match the part number to your specific model — do not substitute based on appearance alone.
Will this belt fit my Kenmore dryer?
Many Kenmore dryers — especially the popular 110-series — are manufactured by Whirlpool and use the 341241 belt. Check your model number against the compatibility list and contact our support team if you need help confirming the fit before ordering.
How do I know if my drum belt needs to be replaced?
The most obvious sign is that the dryer motor hums but the drum does not spin. You may also notice a thumping or slapping sound during operation, a burning rubber smell, or clothes that are damp after a full cycle. Open the dryer cabinet to visually confirm if the belt is broken, frayed, or stretched.
Should I also replace the idler pulley and drum rollers?
Yes — since the dryer is already disassembled, it is highly recommended to inspect and replace the idler pulley (691366) and drum support rollers (349241T) at the same time. These parts wear at a similar rate and replacing all three together — often sold as a repair kit — prevents having to disassemble the dryer again in the near future.
Is this an OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same belt that came installed in your dryer from the factory — same materials, dimensions, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
EXP694 Dryer Repair Kit Replaces DC97-16782A, 6602-001655, DC93-00634A
The EXP694 Dryer Repair Kit is a complete drum system rebuild solution designed to restore smooth, quiet, and efficient dryer operation. This kit includes the most common wear components found inside your dryer: drum belt, idler pulley, and drum support rollers.
Over time, these parts wear down together, causing squeaking, grinding, drum slippage, or complete failure to spin. Replacing all components at once ensures proper alignment, eliminates noise, and prevents repeat breakdowns — making this the most effective long-term repair solution.
Quick Answer
The EXP694 Dryer Repair Kit fixes dryers that won’t spin, make loud squeaking or grinding noises, or stop tumbling. It replaces the belt, rollers, and idler pulley to restore smooth and quiet drum operation.
Note: Includes four rollers (each with shaft and two tri-rings), one idler pulley, and one belt. Replace all four rollers for even wear. Inspect the drum and felt seal (e.g., DC97-07618A) for wear. Clean lint from the drum and cabinet to prevent overheating.
Common Problems This Part Fixes
Dryer drum not spinning or slipping
Loud squeaking, grinding, or thumping noises
Uneven or slow drum rotation
Dryer stopping mid-cycle
Excessive vibration or instability
Worn belt, rollers, or idler pulley components
Replaces Part Numbers
This repair kit replaces the following common drum system components:
Drum Roller: DC97-16782A, AP5325135, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, PS11749648
Idler Pulley: DC93-00634A, AP6038887, DC96-00882C, DC61-01230B, DC96-00882B, PS11771601, 12002777, AP4010261, 1401171, 35001083, 35001098, 35001276, AH2004052, DC61-01215A, DC96-00882B, EA2004052, PS2004052
Drum Belt: 6602-001655, AP4373659, 1935594, 6602-001314, PS4133825, WPW10205415, AP6017004, W10205415, 35001137, 6602-001314, PS11750299
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This repair kit is compatible with select dryers from the following brands:
Samsung dryers (gas and electric models)
Kenmore / Sears dryers (select models built on Samsung platform)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Complete drum repair kit including belt, rollers, and idler pulley
OEM-equivalent fit, performance, and durability
Eliminates noise and restores smooth drum rotation
Prevents repeat repairs by replacing all wear components together
Cost-effective all-in-one repair solution
DIY-friendly installation with basic tools
Product Specifications
Includes 4 drum rollers (DC97-16782A, ~3-1/4" diameter x 1-1/8" width, blue/black plastic/rubber, metal shaft, self-lubricating bushing with ball bearing, each with shaft and two tri-rings), 1 idler pulley (DC93-00634A, metal/plastic), 1 drum belt (6602-001655, 92" long, 5 ribs, neoprene), kit dimensions ~10"L x 6"W x 4"H.
Part Type
Dryer Repair Kit
Includes
Belt, Rollers, Idler Pulley
Application
Dryer Drum System
Condition
Aftermarket Replacement
Compatible Brands
Samsung, Kenmore
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Disconnect power before servicing. Remove dryer panels, release belt tension, and replace worn components. Ensure proper alignment of the belt and rollers before reassembly. For best results, replace all components included in this kit at the same time.
Frequently Asked Questions
Should I replace all parts at once?
Yes. The belt, rollers, and pulley wear together. Replacing all components ensures smooth operation and prevents future breakdowns.
Will this fix dryer noise?
Yes. This kit resolves most squeaking, grinding, and thumping noises caused by worn drum components.
Is this an OEM part?
This is a high-quality aftermarket repair kit built to OEM-equivalent standards for performance and durability.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Whirlpool WPW10131172 Dryer Drive Belt - Compatible with Admiral, Amana, Maytag, Whirlpool
Product Description
Ensure efficient drying with the Genuine Whirlpool WPW10131172 Dryer Drive Belt. This OEM drive belt is designed for select Admiral, Amana, Crosley, Inglis, Maytag, and Whirlpool dryers, driving the drum to ensure proper rotation and consistent performance. Made of durable rubber, it delivers reliable tension and flexibility, addressing issues like the drum not spinning, excessive noise, or failure to start.
Note: Includes one drive belt. Disconnect power and gas (if applicable) before installation. Inspect drum rollers and idler pulley for wear during replacement.
Replaces part numbers: WPW10131172, W10131172, 1449763, PD00003839, EAP11748749, AP6015470, PS11748749.
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Admiral, Amana, Crosley, Inglis, Maytag, and Whirlpool dryers.
🔄 Specifications: OEM rubber drive belt, 4 ribs, 3 grooves.
💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability and proper tension.
🛠️ Easy Installation: Requires screwdriver, socket wrench, and work gloves; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves drum not spinning, excessive noise, or failure to start issues.
Product Specification
Part Number: Genuine Whirlpool WPW10131172
Component Type: Dryer drive belt
Material: Rubber
Mounting: Tension-mounted around drum and motor pulley
Operating Conditions: Suitable for household and commercial dryer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source and gas supply (if applicable) before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a reliable fix!
XPARTCO 285753A Washer Direct Drive Motor Coupler
The XPARTCO 285753A is an aftermarket replacement direct drive motor coupler (also called a motor coupling or drive coupler) compatible with a wide range of Whirlpool-family top-load washers including Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The motor coupler connects the drive motor shaft to the transmission — transferring the motor's power to the transmission to drive the agitator and spin the drum during wash and spin cycles. It is a deliberate weak point in the drivetrain: if the washer is overloaded, the coupler breaks apart first, protecting the far more expensive motor and transmission from damage.
This is the updated 285753A design with metal sleeves for added strength — it replaces all previous coupler styles and versions including the original 285753, 280152, 285743, and 285140. This kit includes 2 plastic coupling halves and 1 rubber isolation dampener. Dimensions approximately 2" L x 1-1/4" W x 2" H. Fits direct-drive top-load washers only — not compatible with belt-drive machines. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 285753A Washer Motor Coupler fixes top-load washers that fill and drain normally but will not agitate or spin. The motor coupler connects the motor to the transmission — when it breaks, the motor runs but neither the agitator nor the drum moves. Kit includes 2 plastic coupling halves and 1 rubber dampener. Updated design with metal sleeves. Replaces all previous coupler versions including 285753, 280152, 285743, 285140. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, and more direct-drive top-load washers.
Common Problems This Part Fixes
Washer fills with water and drains but will not agitate or spin
Motor runs (you can hear it) but agitator and drum do not move
Washer spins slowly or incompletely — clothes still very wet after spin cycle
Loud humming or buzzing from the motor area without agitation or spin
Burning rubber or plastic smell during the wash or spin cycle
Washer shakes excessively — broken coupler causing uneven power transfer
Broken plastic or rubber pieces visible inside the bottom of the washer cabinet
Replaces Part Numbers
This motor coupler directly replaces the following OEM and cross-reference part numbers:
285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AWP39583, PD00002353, AH1485646, EAP1485646, EA1485646, TJ285753, ER285753, AP3963893, PS1485646.
The 285753A replaces all previous motor coupler styles and versions. If your parts diagram shows any of the older numbers above, the 285753A is the correct current replacement.
Compatibility
This motor coupler is compatible with select direct-drive top-load washers from the following brands:
Whirlpool top-load washers (direct drive — no belt)
Kenmore / Sears top-load washers — 70 series, 80 series, 90 series, and 110 series (Whirlpool-built)
KitchenAid top-load washers
Maytag top-load washers (direct drive models)
Amana top-load washers
Roper top-load washers
Admiral top-load washers
Estate top-load washers
Crosley top-load washers
Inglis top-load washers
Magic Chef top-load washers
Important: The 285753A is for direct-drive top-load washers only — machines where the motor connects directly to the transmission without a belt. It is not compatible with front-load washers or older belt-drive top-load washers. If you can see a drive belt inside your washer cabinet, this is not the correct part.
Key Features
Connects the drive motor shaft to the transmission — transfers motor power to drive the agitator and spin drum
Intentional sacrificial part — designed to break before the motor or transmission during overload, saving far more expensive components
Updated 285753A design with metal sleeves — stronger than original all-plastic versions; replaces all previous coupler styles
Kit includes 2 plastic coupling halves and 1 rubber isolation dampener — complete assembly
Dimensions: approximately 2" L x 1-1/4" W x 2" H
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef direct-drive washers
Replaces all previous coupler versions including 285753, 280152, 285743, and 285140
Aftermarket replacement built to OEM-equivalent quality standards
Cost-effective DIY repair — typically under $15 and 30–45 minutes of work
Product Specifications
Part Number
285753A
Part Type
Washer Direct Drive Motor Coupler (Motor Coupling Kit)
Condition
Aftermarket Replacement
Application
Direct-Drive Top-Load Washers (no belt)
Dimensions
Approx. 2" L x 1-1/4" W x 2" H
Color
Black / Off-White
Material
Rubber / Plastic / Metal (metal sleeve inserts)
Kit Includes
2 plastic coupling halves, 1 rubber isolation dampener
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Remove the washer's cabinet by releasing the top panel clips and removing the front panel screws — the motor and transmission are at the bottom of the machine. The motor coupler is a three-piece assembly between the motor shaft and the transmission input shaft. Pull the motor forward to release it from the mounting clips. The broken coupler pieces will likely fall out at this point — inspect the motor shaft and transmission shaft for any remaining plastic debris and clear it. Press the new rubber dampener onto the motor shaft coupling half first, then onto the transmission shaft coupling half, and snap the motor back into the mounting clips. Verify both coupler halves are seated securely and the rubber dampener is centered between them. Reassemble the front panel and top panel. Restore power and run a short cycle to confirm the agitator and spin function normally. Work gloves recommended — sharp sheet metal edges inside the cabinet. Tools needed: Phillips screwdriver, 1/4" nut driver, flat-head screwdriver, work gloves.
Frequently Asked Questions
What does the motor coupler do?
The motor coupler is a three-piece assembly — two plastic coupling halves and a rubber dampener — that connects the drive motor shaft to the transmission input shaft in direct-drive washing machines. The motor spins the coupler, which transfers that rotation to the transmission, which in turn drives the agitator and drum. The rubber dampener absorbs shock and vibration between the rigid motor and transmission shafts during direction changes. The coupler is intentionally designed as the weakest link in the drivetrain — if the washer is overloaded or the transmission seizes, the coupler breaks first to protect the far more expensive motor and transmission from damage.
My washer fills and drains but won't agitate or spin — is the motor coupler the cause?
Yes — this is the classic symptom of a broken motor coupler. Because the pump is typically driven directly by the motor before the coupler connection, a broken coupler allows the motor to run and the pump to drain normally, but neither the agitator nor the spin drum receives any power. If you can hear the motor running but nothing moves, open the washer cabinet and inspect the coupler — you will likely find broken plastic pieces at the bottom of the cabinet near the motor and transmission.
Why does the motor coupler break?
The most common cause is overloading — packing too many heavy items into the washer creates enough mechanical resistance that the coupler snaps rather than allowing the motor to be damaged. Other causes include a worn or seized transmission, a worn motor, normal wear over many years of use, or a single sudden jam caused by a foreign object. If your coupler breaks a second time shortly after replacement, inspect the transmission for signs of wear or binding — a stiff or seized transmission will continue to break new couplers.
What is the difference between 285753 and 285753A?
The 285753A is the updated current version that superseded the original 285753. The A version incorporates metal sleeve inserts in the plastic coupling halves for improved strength and durability compared to the original all-plastic design. The 285753A replaces all previous versions — including 285753, 280152, 285743, and 285140 — and is the correct part to order regardless of which older number is listed in your washer's parts diagram.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and performance of the original 285753A motor coupler.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WE03X29897 Dryer Drum Belt
Product Title
XPARTCO WE03X29897 Dryer Drum Belt - Compatible with GE, Hotpoint, Kenmore Dryers
Product Description
Ensure your dryer tumbles smoothly with the XPARTCO WE03X29897 Dryer Drum Belt from Parts-O-Matic. This high-quality aftermarket belt, measuring approximately 89.5" long with 4 ribs and 3 grooves, drives the dryer drum for efficient drying. Compatible with select GE, Hotpoint, RCA, and Kenmore dryers, this belt resolves issues like failure to tumble, squealing or thumping noises, or insufficient heat. Enjoy free shipping on all orders at Parts-O-Matic!
Key Features:
✅ Broad Compatibility: Fits select GE, Hotpoint, RCA, and Kenmore dryer models.
🔥 Reliable Performance: 89.5" flat belt with 4 ribs and 3 grooves ensures smooth drum rotation and efficient drying.
💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (Phillips screwdriver, putty knife) and 20–30 minutes for DIY repair.
🛡️ Fixes Common Issues: Resolves drum not tumbling, squealing or thumping noises, or insufficient heat production.
Compatibility:
Compatible with models including but not limited to:
GE: GTD33EASK0WW, GTD42EASJ2WW, GTD65EBSJ0WS, GTX33EASK0WW
Hotpoint: HTX21EASK0WW, HTX24EASK0WS
Kenmore: 363.61542412, 363.71542410
Replaces part numbers: WE03X29897, WE12M29, WE12X21574, WE21M29, 559C197P001, 559C197P003, WE03X29897-30PK, WE120122, WE12M0022, WE12M22, WE12M33, AP7012633, PS16542496.
Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance.
Tips: Vacuum lint and debris from the dryer interior to prevent belt wear. Ensure proper pulley alignment to extend belt life. If the belt feels loose or slips, check the idler pulley tension (e.g., WE12X83). Download our installation guide or watch our YouTube tutorial for step-by-step instructions.
Caution: Avoid stretching the belt during installation, as this can reduce its lifespan.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Get your dryer tumbling perfectly again today!
Add to cart now for an affordable fix with free shipping on your entire order!
2 Pack - XPARTCO 285753A Washer Direct Drive Motor Coupler
The XPARTCO 285753A is an aftermarket replacement direct drive motor coupler (also called a motor coupling or drive coupler) compatible with a wide range of Whirlpool-family top-load washers including Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The motor coupler connects the drive motor shaft to the transmission — transferring the motor's power to the transmission to drive the agitator and spin the drum during wash and spin cycles. It is a deliberate weak point in the drivetrain: if the washer is overloaded, the coupler breaks apart first, protecting the far more expensive motor and transmission from damage.
This is the updated 285753A design with metal sleeves for added strength — it replaces all previous coupler styles and versions including the original 285753, 280152, 285743, and 285140. This kit includes 2 plastic coupling halves and 1 rubber isolation dampener. Dimensions approximately 2" L x 1-1/4" W x 2" H. Fits direct-drive top-load washers only — not compatible with belt-drive machines. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 285753A Washer Motor Coupler fixes top-load washers that fill and drain normally but will not agitate or spin. The motor coupler connects the motor to the transmission — when it breaks, the motor runs but neither the agitator nor the drum moves. Kit includes 2 plastic coupling halves and 1 rubber dampener. Updated design with metal sleeves. Replaces all previous coupler versions including 285753, 280152, 285743, 285140. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, and more direct-drive top-load washers.
Common Problems This Part Fixes
Washer fills with water and drains but will not agitate or spin
Motor runs (you can hear it) but agitator and drum do not move
Washer spins slowly or incompletely — clothes still very wet after spin cycle
Loud humming or buzzing from the motor area without agitation or spin
Burning rubber or plastic smell during the wash or spin cycle
Washer shakes excessively — broken coupler causing uneven power transfer
Broken plastic or rubber pieces visible inside the bottom of the washer cabinet
Replaces Part Numbers
This motor coupler directly replaces the following OEM and cross-reference part numbers:
285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AWP39583, PD00002353, AH1485646, EAP1485646, EA1485646, TJ285753, ER285753, AP3963893, PS1485646.
The 285753A replaces all previous motor coupler styles and versions. If your parts diagram shows any of the older numbers above, the 285753A is the correct current replacement.
Compatibility
This motor coupler is compatible with select direct-drive top-load washers from the following brands:
Whirlpool top-load washers (direct drive — no belt)
Kenmore / Sears top-load washers — 70 series, 80 series, 90 series, and 110 series (Whirlpool-built)
KitchenAid top-load washers
Maytag top-load washers (direct drive models)
Amana top-load washers
Roper top-load washers
Admiral top-load washers
Estate top-load washers
Crosley top-load washers
Inglis top-load washers
Magic Chef top-load washers
Important: The 285753A is for direct-drive top-load washers only — machines where the motor connects directly to the transmission without a belt. It is not compatible with front-load washers or older belt-drive top-load washers. If you can see a drive belt inside your washer cabinet, this is not the correct part.
Key Features
Connects the drive motor shaft to the transmission — transfers motor power to drive the agitator and spin drum
Intentional sacrificial part — designed to break before the motor or transmission during overload, saving far more expensive components
Updated 285753A design with metal sleeves — stronger than original all-plastic versions; replaces all previous coupler styles
Kit includes 2 plastic coupling halves and 1 rubber isolation dampener — complete assembly
Dimensions: approximately 2" L x 1-1/4" W x 2" H
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef direct-drive washers
Replaces all previous coupler versions including 285753, 280152, 285743, and 285140
Aftermarket replacement built to OEM-equivalent quality standards
Cost-effective DIY repair — typically under $15 and 30–45 minutes of work
Product Specifications
Part Number
285753A
Part Type
Washer Direct Drive Motor Coupler (Motor Coupling Kit)
Condition
Aftermarket Replacement
Application
Direct-Drive Top-Load Washers (no belt)
Dimensions
Approx. 2" L x 1-1/4" W x 2" H
Color
Black / Off-White
Material
Rubber / Plastic / Metal (metal sleeve inserts)
Kit Includes
2 plastic coupling halves, 1 rubber isolation dampener
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Remove the washer's cabinet by releasing the top panel clips and removing the front panel screws — the motor and transmission are at the bottom of the machine. The motor coupler is a three-piece assembly between the motor shaft and the transmission input shaft. Pull the motor forward to release it from the mounting clips. The broken coupler pieces will likely fall out at this point — inspect the motor shaft and transmission shaft for any remaining plastic debris and clear it. Press the new rubber dampener onto the motor shaft coupling half first, then onto the transmission shaft coupling half, and snap the motor back into the mounting clips. Verify both coupler halves are seated securely and the rubber dampener is centered between them. Reassemble the front panel and top panel. Restore power and run a short cycle to confirm the agitator and spin function normally. Work gloves recommended — sharp sheet metal edges inside the cabinet. Tools needed: Phillips screwdriver, 1/4" nut driver, flat-head screwdriver, work gloves.
Frequently Asked Questions
What does the motor coupler do?
The motor coupler is a three-piece assembly — two plastic coupling halves and a rubber dampener — that connects the drive motor shaft to the transmission input shaft in direct-drive washing machines. The motor spins the coupler, which transfers that rotation to the transmission, which in turn drives the agitator and drum. The rubber dampener absorbs shock and vibration between the rigid motor and transmission shafts during direction changes. The coupler is intentionally designed as the weakest link in the drivetrain — if the washer is overloaded or the transmission seizes, the coupler breaks first to protect the far more expensive motor and transmission from damage.
My washer fills and drains but won't agitate or spin — is the motor coupler the cause?
Yes — this is the classic symptom of a broken motor coupler. Because the pump is typically driven directly by the motor before the coupler connection, a broken coupler allows the motor to run and the pump to drain normally, but neither the agitator nor the spin drum receives any power. If you can hear the motor running but nothing moves, open the washer cabinet and inspect the coupler — you will likely find broken plastic pieces at the bottom of the cabinet near the motor and transmission.
Why does the motor coupler break?
The most common cause is overloading — packing too many heavy items into the washer creates enough mechanical resistance that the coupler snaps rather than allowing the motor to be damaged. Other causes include a worn or seized transmission, a worn motor, normal wear over many years of use, or a single sudden jam caused by a foreign object. If your coupler breaks a second time shortly after replacement, inspect the transmission for signs of wear or binding — a stiff or seized transmission will continue to break new couplers.
What is the difference between 285753 and 285753A?
The 285753A is the updated current version that superseded the original 285753. The A version incorporates metal sleeve inserts in the plastic coupling halves for improved strength and durability compared to the original all-plastic design. The 285753A replaces all previous versions — including 285753, 280152, 285743, and 285140 — and is the correct part to order regardless of which older number is listed in your washer's parts diagram.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and performance of the original 285753A motor coupler.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10112954 Dryer Drum Belt – Replacement for Whirlpool, Maytag, Amana, and More
Product Overview
This Dryer drive Belt is a replacement part that is guaranteed to keep your dryer running smoothly. Compatible with a range of Whirlpool dryer models, including brands such as Whirlpool, Kenmore, and Maytag. This Drive Belt is an essential component that helps your dryer drum rotate efficiently, ensuring optimal drying performance.
Made in USA – Durable, high-grade construction
Replaces Part Numbers
This drum belt replaces part numbers WPW10112954, W10112954, 1447719, PD00003553, EAP11748388, AP6015116, PS11748388.
It matches original specifications for length, width, and tension to ensure proper operation.
Compatible Brands
Compatible with many dryers from Whirlpool, Maytag, Amana, Crosley, Admiral, and Kenmore (Whirlpool-built). Fits a range of front-load and top-load electric and gas dryer models.
Key Features:
✅ Made in USA – Durable, high-grade construction
🔁 Replaces: WPW10112954, AP6015092, PS11748690
🧰 Easy to install – fits Whirlpool, Kenmore, Maytag & more
📦 Built to OEM standards for a long-lasting fit
⚠️ Unplug appliance before servicing. Contact us to confirm model compatibility.
💯 30-Day Money Back Guarantee🔧 Part Number: W10112954
Fixes the Following Issues
Dryer drum won’t spin
Belt is visibly cracked, frayed, or broken
Dryer makes thumping or squealing sounds
Motor runs but clothes stay stationary
Why Buy from Parts-O-Matic
Cost-effective aftermarket solution
Fast and free U.S. shipping
Trusted by professional repair technicians and DIYers
Easy returns and dependable customer service
W11568627 Genuine OEM Dryer Drum Belt - Compatible with Whirlpool, Maytag, Kenmore
Product Description
Restore your dryer’s tumbling action with the W11568627 Genuine OEM Dryer Drum Belt. This Whirlpool-manufactured belt is designed for select Whirlpool, Maytag, Kenmore, and other compatible dryers. It connects the motor to the drum, ensuring smooth rotation during the drying cycle. This part addresses issues like the drum not spinning, unusual noises (e.g., squeaking or thumping), or the dryer stopping mid-cycle, often caused by a worn, stretched, or broken belt.
Note: Includes (1) dryer drum belt. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: W11568627, W10577771, PD00070745, EAP16660508, AP7175918, PS16660508.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: WED5010LW0, WED4950EW0, WED4950EW1, WED4950EW2, WED4950EW3
Maytag: MED4950DW0, MED4950DW1, MED4950DW2, MED4950DW3
Kenmore: 110.67022610, 110.67022611, 110.67022612, 110.67022613
Amana: NED4950EW0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, and other dryers.
💪 Reliable Performance: Ensures smooth drum rotation for consistent drying.
🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves drum not spinning, squeaking noises, or mid-cycle stopping.
Product Specification
Part Number: W11568627
Component Type: Dryer drum belt
Material: Rubber
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a reliable fix!
XPARTCO 279640 Dryer Idler Pulley
The XPARTCO 279640 is an aftermarket replacement dryer idler pulley (also called a belt tension pulley wheel) compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral. The idler pulley is spring-tensioned against the drive belt to maintain correct tension as the belt wraps around the drum — allowing the drum to rotate smoothly and quietly. When the idler pulley bearing wears out, the belt loses proper tension and the dryer begins making squealing, squeaking, or clunking noises, and the drum may eventually stop spinning.
This pulley is constructed from sturdy plastic with a metal bearing and measures 1-7/8" L x 3/4" W x 1-7/8" H. The kit includes the greased pulley wheel, washer, and tri-ring retaining clip — everything needed for a complete replacement. It mounts directly to the existing idler arm on compatible models. Note: this is the pulley wheel only, not the full idler arm assembly. On some newer Whirlpool models, the complete W10837240 idler pulley arm assembly may be required instead.
Quick Answer
The XPARTCO 279640 Dryer Idler Pulley fixes Whirlpool-family dryers that are squealing, squeaking, clunking, or have a drum that won't spin due to improper belt tension. Plastic body with metal bearing. 1-7/8" L x 3/4" W x 1-7/8" H. Kit includes pulley, washer, and tri-ring clip. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral dryers. Pulley only — not the full arm assembly.
Common Problems This Part Fixes
Loud squealing or squeaking noise when dryer is running
Clunking or thumping sound during the drying cycle
Dryer drum not spinning — belt slips or loses tension when pulley bearing fails
Belt repeatedly slipping off due to improper tension
Dryer drum spinning intermittently and stopping while the motor continues to run
Excessive vibration or shaking during the drying cycle
Visible wear, cracking, flat spots, or a pulley wheel that no longer spins freely on its shaft
Replaces Part Numbers
This idler pulley directly replaces the following OEM and cross-reference part numbers:
279640, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, AWP39098, PD00002356, EAP334244, AP3094197, PS334244.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (select Whirlpool-built models)
Maytag dryers (gas and electric)
KitchenAid dryers
Amana dryers
Crosley dryers
Inglis dryers
Admiral dryers
Important: The 279640 is a pulley wheel only — it mounts to the existing idler arm on compatible models. Some newer Whirlpool-family dryers (particularly models with the lint screen inside the door) require the complete W10837240 idler pulley arm and bracket assembly instead. If your model calls for W10837240, order that part rather than the 279640 pulley alone.
Key Features
Maintains correct tension on the drive belt for smooth, quiet drum rotation every cycle
Plastic body with metal bearing — durable construction resists wear and heat damage
Dimensions: 1-7/8" L x 3/4" W x 1-7/8" H — direct replacement for the original 279640
Kit includes greased pulley wheel, washer, and tri-ring retaining clip — ready to install
Pulley comes pre-greased — no additional lubrication required
Mounts directly to existing idler arm on compatible Whirlpool-family models
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral dryers
Aftermarket replacement built to OEM-equivalent quality standards
Often replaced together with the drum belt (341241 or 661570V) for a complete drum drive repair
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
279640
Part Type
Dryer Idler Pulley Wheel (Belt Tension Pulley)
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Dimensions
1-7/8" L x 3/4" W x 1-7/8" H
Material
Plastic body / Metal bearing
Color
White
Lubrication
no additional lubrication required
Includes
Pulley wheel, washer, and tri-ring retaining clip
Note
Pulley wheel only — not the full arm assembly (see W10837240 for arm assembly)
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, Admiral
Often Replaced With
341241 or 661570V Drum Belt
Installation Notes
⚠️ Unplug Dryer Before Starting Unplug the dryer from the power outlet (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen and unscrew the Phillips screws inside the lint screen housing. Use a putty knife to release the top panel clips and lift the top panel. Remove the front panel to access the drum and drive components. Release belt tension from the idler pulley, then lift the drum and slide the belt off. Remove the tri-ring retaining clip from the idler arm shaft using needle-nose pliers, then slide the old pulley wheel off the shaft. Slide the new 279640 pulley wheel onto the idler arm shaft, reinstall the washer, and press the new tri-ring clip onto the shaft to secure the pulley. Re-route the drum belt around the new pulley and motor pulley, reinstall the drum, and reassemble the dryer. Run a test cycle to verify quiet operation. Tip: While the dryer is open, inspect the drum belt for wear and replace if needed. Tools needed: Phillips screwdriver, 1/4" nut driver, putty knife, small flat-head screwdriver, needle-nose pliers.
Frequently Asked Questions
What is the difference between the 279640 pulley and the W10837240 idler assembly?
The 279640 is just the pulley wheel — it replaces only the wheel on the existing idler arm and is used on older Whirlpool-family dryer models. The W10837240 is a complete idler arm and bracket assembly used on newer Whirlpool-family models (particularly those with the lint screen inside the door). If your dryer originally used the 279640, order this part. If your parts diagram calls for W10837240, order that assembly instead — the 279640 pulley alone will not fit the newer arm design.
What does the idler pulley do?
The idler pulley is a spring-tensioned wheel mounted on the idler arm inside the dryer. It presses against the drive belt to keep the correct amount of tension on the belt as it wraps around the drum. Without proper tension, the belt slips, the drum spins unevenly, or the drum stops spinning entirely. A worn pulley bearing also causes squealing, squeaking, or clunking noises during operation.
Should I replace the drum belt at the same time?
Yes — since the dryer is already disassembled, this is the ideal time to inspect and replace the drum belt (341241 or 661570V depending on your model). The belt and idler pulley wear at similar rates, and a worn belt on a new pulley significantly shortens the life of the new part. Replacing both together in a single repair also saves you from having to disassemble the dryer again shortly after.
Why is my dryer squealing?
A high-pitched squeal when the dryer starts or runs is one of the most common signs of a worn idler pulley bearing. As the bearing wears, it creates friction and noise against the shaft. The squeal typically gets louder over time and may eventually turn into a grinding or clunking sound as the bearing fails further. Replacing the idler pulley is usually the fix in these cases, and is much less expensive than a service call.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic with a metal bearing to match the dimensions and performance of the original 279640 idler pulley.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4392065 Dryer Maintenance Kit Replaces 349241T, 341241, WP691366
The XPARTCO 4392065 is an aftermarket dryer maintenance and repair kit containing the three most commonly replaced drum drive components for Whirlpool-family 29-inch dryers including Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The kit includes the drum belt (341241), idler pulley (691366), and rear drum support roller kit (349241T) — the three parts that work together to drive and support the dryer drum, and that most frequently cause squealing, thumping, no heat, and drum-not-spinning issues when worn.
Replacing all three parts together in a single repair is the recommended approach — since these components wear at similar rates and the dryer must be fully disassembled to access any one of them, doing all three at once saves significant time and cost compared to replacing them individually. The kit contains everything needed: 1 drum belt, 1 idler pulley, 2 drum support rollers, 4 tri-rings, and 2 retaining washers. Installs in 45–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 4392065 Dryer Maintenance Kit fixes squealing, thumping, no heat, and drum-not-spinning issues in Whirlpool-family 29" dryers in a single repair. Includes 1x 341241 drum belt (92-1/4" x 1/4", 4 ribs), 1x 691366 idler pulley, 2x 349241T drum rollers, 4x tri-rings, and 2x retaining washers. Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef dryers.
Common Problems This Kit Fixes
Loud squealing, squeaking, or thumping noise during the drying cycle
Dryer drum not spinning — motor runs but belt has broken
Clothes not tumbling or drying properly
Grinding or rumbling noise from the drum area
Dryer drum spinning unevenly or stopping intermittently
Belt repeatedly slipping or breaking due to worn idler pulley
Drum vibrating excessively due to worn roller bearings
What's in the Kit
Part 1 of 3 — 1 included
341241 Dryer Drum Belt
92-1/4" L x 1/4" W · 4 ribs, 3 grooves · Neoprene rubber · Wraps around the drum and connects to the idler pulley and motor pulley to drive drum rotation
Part 2 of 3 — 1 included
691366 Idler Pulley
Sturdy plastic with metal shaft and idler arm · Maintains correct tension on the drum belt between the motor and drum · Self-lubricating bearing
Part 3 of 3 — 2 included
349241T Rear Drum Support Roller Kit
2 drum rollers · Reinforced self-lubricating metal bearings, thickened rubber wheel · Supports the rear of the drum as it rotates · Includes 4 tri-rings and 2 retaining washers
Replaces Part Numbers
Kit (4392065) cross-references:
4392065, 2014, 26000279435, 26000279436, 279435, 279436, 279708, 279708MS, 279709, 279709MS, 279860, 279948, 4392065VP, 587636, 80046, 8106, 8237, 8238, AWP39348, PD00002464, AH373087, EA373087, AP3131942, PS373087.
341241 Belt cross-references:
341241, 14210003, 2008, 26000341241, 26000349533, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 341241VP, 345473, 349533, 529597, 53-0186, 53-1080, 53-1086, 53-1528, 53-1589, 53-2671, 53-2910, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8206, 8210, 920H4, 920H5, 99906951, 99989673, 99989674, FSP341241, LB276, LB279, P46-037, P46-149, W10127457, W10131364, AH346995, AP32, EA346995, ER341241, AP2946843, PS346995, TJ341241.
691366 Idler Pulley cross-references:
WP691366, 691366, 239477, 26000691366, 3346, 337116, 337407, 337510, 3388345, 338946, 3394332, 347034, 347226, 347277, 4319391, 688166, 691366BULK, 8207, 99989677, DE412, K35-163, W10612905, AP6010582, PS11743765.
349241T Drum Roller cross-references:
349241T, 26000349241, 337089, 3389901, 3397588, 3397590, 340352, 3436, 349241, 349241TVP, 661562, 8170, 8205, 99989678, 99989679, AH347627, EA347627, K34-895, AP3098345, PS347627.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This kit is compatible with select 29-inch large-capacity gas and electric dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (select Whirlpool-built models)
Maytag dryers (gas and electric)
Amana dryers
KitchenAid dryers
Roper dryers
Admiral dryers
Estate dryers
Crosley dryers
Inglis dryers
Magic Chef dryers
Note: This kit is designed for 29-inch large-capacity Whirlpool-family dryers. If your dryer is a compact or stackable model, verify compatibility with our support team before ordering.
Key Features
Three-part kit addresses the most common drum drive failures in a single repair — saves time and cost vs. replacing parts individually
Belt: 92-1/4" x 1/4", 4 ribs, 3 grooves — premium neoprene rubber resists cracking, heat, and stretching
Idler pulley: sturdy plastic with metal shaft and self-lubricating bearing — maintains correct belt tension
Drum rollers: 2 included — reinforced self-lubricating metal bearings and thickened rubber wheels for quiet, stable drum support
All hardware included: 4 tri-rings and 2 retaining washers — everything needed for complete installation
Since the dryer must be disassembled to access any one of these parts, replacing all three at once eliminates repeated teardowns
Compatible with 11 major appliance brands on the Whirlpool 29-inch platform
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 45–60 minutes with basic hand tools
Product Specifications
Kit Part Number
4392065
Condition
Aftermarket Replacement
Application
29-inch Gas and Electric Dryers
Kit Includes
1x 341241 Drum Belt, 1x 691366 Idler Pulley, 2x 349241T Drum Rollers, 4x Tri-rings, 2x Retaining Washers
Belt Length
92-1/4 inches
Belt Width
1/4 inch
Belt Ribs
4 ribs, 3 grooves
Belt Material
Neoprene rubber
Idler Pulley Material
Plastic / Metal
Drum Roller Quantity
2 rollers (replace both at same time)
Roller Lubrication
Self-lubricating bearings — no grease needed
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the lint screen and unscrew the Phillips screws inside the lint screen housing. Use a putty knife to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release belt tension at the idler pulley, then lift the drum out. Remove the old belt, idler pulley, and drum rollers. Install the 2 new 349241T rollers onto the rear bulkhead shafts, pressing the new tri-rings and washers into place. Install the new 691366 idler pulley onto the idler arm. Loop the new 341241 belt around the drum with the ribbed side facing inward, then route it around the idler pulley and motor pulley. Reinstall the drum, reassemble the front and top panels, and restore power. Run a test cycle to confirm quiet operation. Tools needed: Phillips screwdriver, 1/4" nut driver, putty knife, needle-nose pliers, flat pry tool.
Frequently Asked Questions
Why should I replace all three parts at the same time?
The drum belt, idler pulley, and drum support rollers all work together as a system and wear at similar rates under the same conditions. Since the dryer must be fully disassembled to access any one of these parts, replacing all three in a single repair is far more cost-effective than replacing them one at a time — which would require three separate teardowns. This is the same reason the 4392065 maintenance kit was designed: one repair, all three parts, done.
What does each part in this kit do?
The 341241 drum belt wraps around the outside of the drum and connects to the idler pulley and motor pulley — the motor drives the belt, which spins the drum. The 691366 idler pulley maintains tension on the belt so it grips the drum and motor pulley properly. The 349241T drum rollers are support wheels mounted on the rear of the dryer that cradle and support the back edge of the drum as it rotates. All three are essential to smooth, quiet drum operation.
How is this kit different from the 4392067 repair kit?
The 4392065 and 4392067 kits are designed for different Whirlpool-family dryer generations. The 4392065 uses the 341241 belt (92-1/4" x 1/4", 4 ribs) and the 691366 idler pulley, and is for older 29-inch Whirlpool-family dryers. The 4392067 uses the 661570V belt (93-1/2" x 1/4", 4 ribs) and the W10837240 idler arm assembly, and is for newer Whirlpool-family dryers (those with the lint screen inside the door). Use your model number to confirm which kit fits your specific dryer before ordering.
Do I need to lubricate the drum rollers after installing?
No — the 349241T drum rollers include self-lubricating bearings and do not require any additional grease or oil after installation. Applying grease to self-lubricating rollers is not recommended and can actually attract lint and debris, causing the rollers to wear faster.
Is this an OEM or aftermarket kit?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM kit, but all three included components are manufactured from premium neoprene rubber, durable plastic, and metal to match the dimensions and performance of the original 4392065 kit parts.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
