A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor
The A00126401 is a genuine Frigidaire OEM drain pump motor assembly for Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers. At the end of each wash cycle, this pump is what actually pushes the used wash water out of the tub and through the drain hose, clearing the way for the next fill. An internal impeller spins to create that flow, drawing water in and forcing it out through the drain line.
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM, with 1/4" male terminals, this assembly includes the pump motor, impeller, and seal. Common causes of failure include clogs from food particles or debris interfering with the impeller, worn or damaged impeller blades, and electrical failure of the motor itself. A failing drain pump typically shows up as water not draining from the dishwasher, water pooling at the bottom of the tub after a cycle, a grinding or humming noise from the pump area, or the dishwasher refusing to start a new cycle because it detects standing water left over from the last one. It directly replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535.
Quick Answer
The A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers that won't drain, pool water at the bottom of the tub, make grinding or humming noises, or won't start a new cycle due to leftover water. 120V, 60Hz, 35W, 0.8A, 3600RPM. Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, EAP2363535. Before replacing the pump, check the drain hose and sump screen for a simple clog — one customer replaced the pump, still had no drainage, and found a clogged drain hose was the actual cause.
Common Problems This Part Fixes
Dishwasher won't drain at the end of the cycle
Water pooling at the bottom of the tub after a completed cycle
Grinding or humming noise coming from the pump area
Dishwasher won't start a new cycle because it detects leftover water from the previous one
Dishes not getting properly cleaned due to poor water circulation
Pump running but producing little or no actual drainage
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
A00126401, 154736201, 3015405, 5304492415, PD00000922, EAP2363535, AFR20557, AP5690431, PS8689824
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Frigidaire dishwashers, and also fits select Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore/Sears dishwashers built on the same platform.
Note: This assembly includes the pump motor, impeller, and seal. Whether a check valve flapper is included can vary by supplier batch — inspect your old pump's flapper condition before assuming one is included, and contact our support team if you need to confirm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified motor speed and impeller design
Pumps water out of the tub and through the drain hose at the end of each cycle
Resolves "won't drain," "water pooling," "grinding or humming noise," and "won't start due to leftover water" symptoms caused by pump failure
Includes pump motor, impeller, and seal
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM
1/4" male terminals for a direct plug-in electrical fit
Direct drop-in replacement — no modification required
Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535
Compatible with Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
A00126401
Part Type
Dishwasher Drain Pump Motor Assembly
Condition
Genuine OEM
Brand
Frigidaire
Voltage
120V
Frequency
60 Hz
Wattage
35 W
Amperage
0.8 A
Motor Speed
3600 RPM
Terminals
1/4" male
Kit Contents
Pump motor, impeller, seal
Dimensions
Approx. 3-1/4"L x 2-1/2"W x 3-3/4"H
Color
White / Green
Repair Difficulty
Easy to Moderate — under an hour
Quantity
1 drain pump motor assembly
Compatible Brands
Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, Kenmore
Installation Notes
⚠️ Unplug Dishwasher Before Starting — Rule Out A Simple Clog First Before replacing the pump, check the drain hose and the sump screen at the bottom of the tub for a clog — food debris and buildup in the hose can produce identical "won't drain" symptoms to a failed pump, and clearing a clog costs nothing but a few minutes. One customer replaced the pump entirely, still had no drainage, and only afterward discovered the actual cause was a clogged drain hose; disconnecting and running a cycle without the hose attached can help confirm whether the pump itself is pushing water. Once you've confirmed the pump needs replacing, disconnect power at the outlet or shut off the circuit breaker, and pull the dishwasher out from under the counter for access to the underside — removing the two screws securing it to the counter first. Have a drain pan or towels ready for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the two wire connectors from the old pump, remove the three screws securing it in place, and disconnect the hose connections, then pull the old pump free. Install the new A00126401 in the same position, reconnect the hose connections, and reconnect the two wire connectors. Secure the pump with its three mounting screws. Slide the dishwasher back into place and secure it to the counter, restore power, and run a full test cycle to confirm normal draining with no leaks or unusual noise. Tools needed: Phillips screwdriver, flat-blade screwdriver, needle-nose pliers, drain pan, work gloves.
Frequently Asked Questions
My dishwasher won't drain. How do I know if it's actually the pump and not something simpler?
Check the drain hose and the sump screen at the bottom of the tub for a clog first — this is a genuinely common cause of "won't drain" symptoms and costs nothing to rule out. If the hose and screen are clear and the pump still won't run, test the pump motor with a multimeter for continuity. If there's no continuity, or the pump is getting power but still won't run, replacement is the correct fix.
I already replaced the pump and it's still not draining. What should I check next?
This has happened to real customers, and the cause was ultimately a clogged drain hose rather than the pump itself. If replacing the pump didn't solve the drainage problem, disconnect the drain hose and run a test cycle to see whether water is being pushed out at all — if it is, the hose downstream is the likely culprit and worth snaking out or replacing.
Does this kit include the check valve flapper?
This varies by supplier batch — this assembly reliably includes the pump motor, impeller, and seal, but flapper inclusion isn't consistent across all sources. Inspect your old pump's flapper for wear or damage before installation, and contact our support team if you need to confirm whether a flapper is included with your specific order.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original motor speed, impeller design, and terminal configuration of the drain pump originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WP389140 Genuine OEM Whirlpool Washer Drive Block
The WP389140 is a genuine Whirlpool OEM drive block for large-capacity belt-drive and direct-drive top-load washers. This is a purely mechanical coupling component: it connects the inner spin basket to the transmission's drive shaft, so that when the transmission turns, the basket turns with it. Without a properly seated drive block, the connection between the motor's rotational power and the basket is lost or unreliable, even though every electrical component in the washer may be working perfectly.
Measuring approximately 2-5/16" high, this drive block is a wear component subject to gradual mechanical stress every time the washer agitates or spins. A worn or failed drive block produces a distinctive set of symptoms: the basket may spin freely without properly engaging, the washer may spin slowly and leave clothes excessively wet, or you may hear a loud knocking or banging noise during operation as the connection between the basket and drive shaft becomes loose or worn. It directly replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858.
Quick Answer
The WP389140 Genuine OEM Whirlpool Washer Drive Block fixes Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis top-load washers with a basket that spins freely without engaging, slow spinning that leaves clothes excessively wet, or loud knocking/banging noise during operation. Approximately 2-5/16" high. For large-capacity belt-drive and direct-drive washers. Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, 2858. This repair typically requires a spanner wrench to remove a large securing nut — budget for the right tool before starting.
Common Problems This Part Fixes
Washer basket spins freely without properly engaging during the wash or spin cycle
Washer spins slowly, leaving clothes excessively wet at the end of a cycle
Loud knocking or banging noise during operation
Washer shakes or moves noticeably during spin
Basket continues spinning after the cycle should have stopped
Inefficient wash and spin cycles overall due to poor basket engagement
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive block directly replaces the following OEM and cross-reference part numbers:
WP389140, 389140, 357782, 97360, PD00002363, EAP11741977, WP389140VP, AP6008836, AWP47839, J27-936, PS11741977.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive block is compatible with select Whirlpool large-capacity top-load washers (belt-drive and direct-drive), and also fits select Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers built on the Whirlpool platform, including model numbers such as:
NTW4516FW, NTW4516FW3, NTW4516FW4
WTW4816FW2, WTW4816FW3
RTW4516FW, NTW4605EW, WTW4800BQ
Note: Always verify your full model number before ordering, since Whirlpool uses different drive block designs across its washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified fit for a secure basket-to-transmission connection
Connects the inner spin basket to the transmission's drive shaft
Resolves "basket spins freely," "slow spin, clothes too wet," and "loud knocking noise" symptoms caused by drive block wear
Approximately 2-5/16" high
Designed for large-capacity belt-drive and direct-drive washer platforms
Direct drop-in replacement matching the original fit onto the spin tube notches
Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP389140
Part Type
Washer Drive Block
Condition
Genuine OEM
Brand
Whirlpool
Application
Large-Capacity Belt-Drive and Direct-Drive Top-Load Washers
Height
Approx. 2-5/16 in.
Function
Connects the inner spin basket to the transmission drive shaft
Related Component
Drive cam (commonly inspected/replaced during the same repair)
Repair Difficulty
Moderate — spanner wrench and washer disassembly required
Quantity
1 drive block
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, Inglis
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Spanner Wrench Required Disconnect power at the outlet or shut off the circuit breaker, and shut off the hot and cold water supply valves before beginning. Wear work gloves. Remove the washer's top and control console per your model's service instructions to access the inner tub assembly. Remove the agitator and any hardware securing the basket, which typically includes a large center nut — a spanner wrench is required to remove this nut, along with a socket and long extension for other fasteners; expect to remove a fair number of components to fully access the drive block. Lift the wash basket out to expose the drive block, which sits on the spin tube near the center of the transmission. Photograph the orientation of the old drive block and any surrounding hardware before removing it. Lift the old drive block free, and while it's accessible, inspect the drive cam nearby for wear as well, since it's commonly replaced at the same time. Slide the new WP389140 drive block into position, making sure it seats fully onto the spin tube notches, and reassemble the basket, hardware, agitator, console, and top panel in reverse order. Restore water and power, then run a test cycle through both wash and spin to confirm the basket engages properly with no unusual noise. Tools needed: multi-screwdriver, spanner wrench, socket set with long extension, work gloves.
Frequently Asked Questions
My washer basket spins freely and doesn't seem connected to anything. Is this the drive block?
Yes, this is the classic symptom of a failed drive block. Since this component is the mechanical link between the transmission's drive shaft and the inner spin basket, once it wears out or fails, the basket can spin independently without properly engaging, even though the motor and transmission are working normally.
Do I really need a spanner wrench for this repair?
Yes, on most models. Accessing the drive block requires removing a large nut that secures the basket assembly, and this nut is specifically designed to be removed with a spanner wrench rather than a standard socket. Trying to remove it without the correct tool risks damaging the nut or the surrounding components, so it's worth having one on hand before you start.
Should I replace the drive cam at the same time?
It's worth inspecting while you have the assembly open, since the drive cam sits in the same area and is commonly replaced alongside the drive block when a technician is already this far into the repair. If it shows visible wear, replacing both at once saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original dimensions and fit of the drive block originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ACP72929002CM Washer Shift Actuator
Coupling Assembly Shift actuator.
Fits specific LG top load washer models.
Replaces Part Numbers: ACP72929002, 4323EA2001C, 1958330, 2653835, ACP73029001, AH3522903, EA3522903, 4323EA2001B, 1327673, AH3577589, EA3577589, AP5674447, AP5258825, PS7786658, PS3522903, AP5245586, PS3577589
Description: This Top Load Washer Coupling Assembly is a replacement component specifically designed for specific LG brand top-loading washing machine models. This assembly connects the agitator shaft to the transmission inside the washer, allowing oscillating motions to be transferred through the transmission from the motor.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WH03X30517 Washer Shift Actuator
The XPARTCO WH03X30517 is an aftermarket replacement shift actuator (mode shifter) for GE top-load washers, and also fits select Hotpoint and Kenmore models. Mounted at the bottom of the washer, this actuator changes the function of the washer's motor between agitation and spin cycles, effectively managing the conversion from agitation to high-speed rotation that removes moisture from clothing at the end of the wash.
Made mostly of plastic, with two mounting holes and a single wire harness connection. Over time, the actuator's internal motor can burn out or fail electrically. Symptoms of a failing shift actuator include the washer failing to switch between agitation and spin modes, the washer not spinning or agitating at all, abnormal noise or grinding during the cycle, or clothes coming out still soggy after a completed wash. It directly replaces WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752.
Quick Answer
The XPARTCO WH03X30517 Washer Shift Actuator fixes GE, Hotpoint, and Kenmore top-load washers that won't switch between agitation and spin, won't spin or agitate at all, or leave clothes still soggy after a wash. Sold individually. Replaces WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752. If your washer agitates and spins fine individually but still won't switch between the two modes after replacing this actuator, the underlying cause may lie elsewhere — one customer found this exact residual symptom after installing this part.
Common Problems This Part Fixes
Washer won't switch between agitation and spin modes
Washer not spinning or agitating at all
Abnormal noise or grinding during the wash cycle
Clothes still soggy after a completed wash cycle
No clicking sound heard when the washer attempts to change modes
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer shift actuator directly replaces the following OEM and cross-reference part numbers:
WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This shift actuator is compatible with select GE top-load washers, and also fits select Hotpoint and Kenmore washers built on the GE platform, including model numbers such as:
GTW680BSJ0WS, GTW680BSJ1WS, GTW680BSJ2WS, GTW680BSJ3WS, GTW680BSJ4WS, GTW680BSJ5WS, GTW680BSJ6WS, GTW680BSJ7WS
GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW220ACK7WW
GTW540ASP0WS, GTW540ASP1WS, GTW465ASN2WW, GTW500ASN1WS, GTW685BSL2WS
YTW4514SN0WS, YTW4514SN1WS, YTW4514PN0DG, YTW4514PN1DG
GTW335ASN0WW, GTW335ASN2WW, GTW460AMJ2WW, GTW750CPL0DG
GTW490ACJ1WW, GTW490ACJ1WS, GTW490ACJ6WW, GTW490ACJ6WS
HTW200ASK0WW, HTW200ASK1WW, HTW200ASK2WW, HTW200ASK3WW, HTW200ASK4WW
HTW240ASK0WS, HTW240ASK1WS, HTW240ASK2WS, HTW240ASK3WS, HTW240ASK4WS, HTW240ASK5WS, HTW240ASK6WS
Note: This is the standalone shift actuator only, sold individually. A related but separate combined kit exists that also includes a shift clutch (WH05X24185); if you also need the clutch, order it separately. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement shift actuator (mode shifter) — switches the motor between agitation and spin
Resolves "won't switch modes," "won't spin or agitate," and "clothes still soggy" symptoms caused by actuator failure
Mostly plastic construction, two mounting holes, single wire harness
Direct drop-in replacement matching the original mounting
Replaces WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752
Compatible with GE, Hotpoint, and Kenmore top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Sold individually
Typical repair takes 15 to 30 minutes
Product Specifications
Part Number
XPWH03X30517
OEM Part Number
WH03X30517
Part Type
Washer Shift Actuator (Mode Shifter)
Condition
Aftermarket Replacement
Material
Plastic
Mounting
Two screw holes
Wiring
Single wire harness
Related Part
WH05X24185 shift clutch (sold separately)
Repair Difficulty
Easy to Moderate — 15 to 30 minutes
Quantity
1 shift actuator (sold individually)
Compatible Brands
GE, Hotpoint, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting — Laying The Washer On Its Side Makes Access Easier Disconnect power at the outlet before beginning. Wear work gloves. This repair typically requires tipping or laying the washer on its side to access the bottom of the machine, where the shift actuator is mounted. Lay the washer down carefully, protecting the floor and the washer's exterior. Locate the shifter connector and unplug it, then remove the two screws holding the actuator in place. Take out the old actuator. Install the new WH03X30517 in the same position, securing it with the two mounting screws, and reconnect the wire harness connector fully. Stand the washer back upright. Restore power and run a test cycle to confirm the washer switches correctly between agitation and spin, listening for a clicking sound as it changes modes. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My washer won't switch from wash to spin, but it will spin if I catch it there. Is this the part I need?
Yes, this is a well-documented symptom of a failing shift actuator. One customer described their machine not going to wash mode with no clicking sound heard when the mode should change, which is a classic sign this part has failed. They accessed the actuator by laying the machine on its side, then unplugged the shifter connector and removed two screws to complete the swap.
I replaced this part but my washer still won't switch from wash to spin. What's going on?
This is a fair question, and it's worth knowing that replacing this actuator doesn't always resolve every mode-switching problem on its own. One customer replaced the mode shifter, cleared all codes, and confirmed the washer agitated and spun fine individually, but it still wouldn't switch between the two modes — suggesting a different or additional component may have been involved in their specific case. If you're still having trouble after installing this part, further diagnosis of the transmission or related components may be needed.
Does this come with the clutch too?
No, this listing is for the shift actuator only, sold individually. A related shift clutch, WH05X24185, is a separate part — if your repair requires replacing both, you'll need to order the clutch separately.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the mounting, wiring, and switching function of the original WH03X30517 shift actuator used in compatible GE, Hotpoint, and Kenmore top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10195039 Dishwasher Float Switch
The XPARTCO W10195039 is an aftermarket replacement float switch for Whirlpool-built dishwashers sold under the Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Amana and related brand names. The float switch is the safety device that shuts off the water fill valve if the water level gets too high before the timed fill cycle ends, so a failed float can mean overfilling or a dishwasher that won't fill properly.
This is a direct-fit aftermarket replacement for the original Whirlpool float switch, which is sold as W10195039 and WPW10195039. Float problems can look like valve or control problems, so check the float for a stuck or damaged action before replacing it.
Quick Answer
The XPARTCO W10195039 Float Switch fixes a Whirlpool-built dishwasher that overfills, leaks from too much water, or won't fill because the float is stuck, damaged, or no longer switching. It is also listed as WPW10195039. Classic symptom: water keeps filling past the normal level, or the dishwasher won't fill and the float looks stuck or cracked.
Common Problems This Part Fixes
Dishwasher overfills or the water level gets too high
Water leaking from too much water in the tub
Dishwasher won't fill because the float switch is stuck or failed
Float is cracked, broken, or doesn't move freely
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This float switch directly replaces the following part numbers:
WPW10195039, W10195039, W10734532, 1872053, MS10-06, AP6016738, AWP49215, EAP11750031, PD00002753, PS11750031
W10195039 is the older Whirlpool number and WPW10195039 is its current replacement. W10734532 comes from a single retailer cross-reference, so confirm against your dishwasher's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This float switch is listed for Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Amana, and Inglis dishwashers, including these examples:
Kenmore 66513979K017, 66515049K111, 66513964K017, 66512776K310
ADB1100AWB0, CDBW4400SB0, KUDC10FBBL0, KUDS30FXSS0, MDB4709PAB0
Note: The models above are a sample of a much longer list, not a full list. A dishwasher that won't fill can also be caused by the inlet valve, so test the float and valve before ordering. Confirm your model number against your parts diagram, or contact our support team to verify fit.
Key Features
Direct-fit aftermarket float switch for Whirlpool-built dishwashers
Shuts off the fill valve if the water level gets too high
Replaces both W10195039 and WPW10195039
Fits Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air and related brands
Product Specifications
Part Number
W10195039
OEM Part Number
W10195039, WPW10195039
Part Type
Dishwasher Float Switch
Condition
Aftermarket Replacement
Application
Whirlpool-Built Dishwashers
Installation Notes
⚠️ Disconnect Power and Shut Off the Water Unplug the dishwasher or switch off its circuit breaker, and turn off the water supply before beginning. Wear work gloves to protect your hands. Follow your model's service guide to reach the float switch, and note the position of each wire connector before disconnecting it. Install the new float switch in the same position, reconnect the wires, and check that the float moves freely before closing the dishwasher. Run a cycle and check for leaks.
Frequently Asked Questions
What does the float switch do?
It shuts off the water fill valve if the water level gets too high before the timed fill cycle ends. It is a safety device that helps prevent overflow.
My dishwasher still won't fill. Will this fix it?
Only if the float is the cause. A dishwasher that won't fill can also have a bad inlet valve, a clogged inlet screen, or a control problem. Check that the float moves freely and test the valve first.
Is W10195039 the same as WPW10195039?
Yes. W10195039 is the older Whirlpool number and WPW10195039 is its replacement. This float switch covers both.
Will this fit my dishwasher?
It is listed for many Whirlpool-built dishwashers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
EXP651 Dryer Belt and Idler Pulley Kit Replaces WPW10112954, W10837240
The EXP651 is an aftermarket dryer repair kit containing two essential drum drive components for select Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, and Roper dryers. The kit includes one drum belt (replaces WPW10112954) and one idler pulley assembly with bracket (replaces W10837240) — the two parts most commonly worn together when a dryer drum stops spinning or becomes noisy.
Replacing both the belt and idler pulley at the same time is the smart repair choice. Since the dryer must be disassembled to access either part, doing both in one repair saves you from having to take the machine apart again if the second part fails shortly after. This kit covers the two most common failure points in the Whirlpool-family dryer drum drive system.
Quick Answer
The EXP651 Dryer Belt and Idler Pulley Kit fixes dryers where the drum is not spinning, making loud squeaking or grinding noises, or the belt has broken. Includes one 93-1/4" x 5/16" 5-rib drum belt (WPW10112954) and one idler pulley assembly with bracket (W10837240). Compatible with select Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, and Roper dryers.
What's in the Kit
Part 1 of 2
Dryer Drum Belt — Replaces WPW10112954
93-1/4" L x 5/16" W x 1/8" H · 5-rib Multi-V rubber belt · Wraps around drum and connects to motor and idler pulleys to drive drum rotation
Part 2 of 2
Idler Pulley Assembly with Bracket — Replaces W10837240
2-1/8" pulley diameter · 6-1/4" L x 1-1/4" W x 3-7/16" H overall · Plastic/metal construction · Maintains correct belt tension to spin the drum · Fits Whirlpool dryers with lint screen inside door
Common Problems This Kit Fixes
Dryer drum not spinning — motor runs but drum stays still
Loud squeaking, squealing, or grinding noise during operation
Clothes not tumbling during the drying cycle
Thumping or slapping noise when dryer is running
Belt slipping off or repeatedly breaking
Burning rubber smell coming from the dryer
Dryer drum turning erratically or stopping while motor continues to run
Replaces Part Numbers
Drum Belt (WPW10112954) cross-references:
WPW10112954, W10112954, 1447719, AWP48873, PD00003553, EAP11748388, AP6015116, PS11748388.
Idler Pulley Assembly (W10837240) cross-references:
W10837240, W10547287, W10547290, 3387372, 3388674, W10118754, W10118756, W10837240VP, AWP41730, PD00025564, FIX11726337, AP5988716, PS11726337, 279640, AP3094197, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, PS334244.
If your part numbers are not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This kit is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric — fits models with lint screen inside door)
Maytag dryers (gas and electric)
Amana dryers
Kenmore / Sears dryers (select Whirlpool-built models)
KitchenAid dryers
Crosley dryers
Admiral dryers
Inglis dryers
Roper dryers
Note: The W10837240 idler pulley fits Whirlpool-family dryers with the lint screen located inside the door. If your dryer has the lint screen on top of the cabinet, a different idler pulley part number may be required. Contact our support team to confirm before ordering.
Key Features
Two-part kit covers the most common drum drive failures in Whirlpool-family dryers in a single repair
Belt: 93-1/4" L x 5/16" W, 5-rib Multi-V rubber — resists cracking, stretching, and heat damage
Idler pulley: 2-1/8" diameter pulley with arm and bracket — maintains correct belt tension for smooth drum rotation
Replacing both parts together saves a second disassembly if the other part fails soon after
Aftermarket replacement built to OEM-equivalent quality standards
Belt directly replaces WPW10112954 / W10112954 — no modification required
Idler pulley directly replaces W10837240 / W10547287 / W10547290 — no modification required
DIY-friendly repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Kit Part Number
EXP651
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Kit Includes
1x Drum Belt (WPW10112954), 1x Idler Pulley Assembly with Bracket (W10837240)
Belt Length
93-1/4 inches
Belt Width
5/16 inch
Belt Height
1/8 inch
Belt Ribs
5 ribs, 4 grooves (Multi-V)
Belt Material
Rubber
Pulley Diameter
2-1/8 inches
Pulley Overall Dimensions
6-1/4" L x 1-1/4" W x 3-7/16" H
Pulley Material
Plastic / Metal
Compatible Brands
Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, Roper
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen, then unscrew the Phillips screws inside the lint screen housing. Use a putty knife to release the top panel clips and lift the top panel. Remove the front panel to access the drum and drive components. Release belt tension at the old idler pulley, lift the drum slightly, and slide the old belt off. Remove the old idler arm assembly by unscrewing the mounting screw, then install the new W10837240 idler pulley assembly and secure with the screw. Loop the new WPW10112954 belt around the drum with the ribbed side facing inward, then route it around the new idler pulley and motor pulley. Consult your model's service manual or a model-specific repair video for the correct belt path. Reassemble and run a test cycle. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
Why should I replace the belt and idler pulley at the same time?
The belt and idler pulley wear together — when one fails, the other is usually close behind. Since the dryer must be fully disassembled to access either part, replacing both in a single repair saves you from having to take the machine apart again soon after. It also protects the new belt from being damaged by a worn pulley, and vice versa.
How does the W10837240 differ from other Whirlpool idler pulleys?
The W10837240 is the updated idler pulley arm and bracket assembly designed for Whirlpool-family dryers that have the lint screen inside the door. It replaces the older W10547287 and W10547290 assemblies. Some older or different Whirlpool models use a different idler pulley style — if you're unsure which one your dryer needs, contact our support team with your model number before ordering.
What is the difference between WPW10112954 and W10112954?
These are the same belt. WPW10112954 is the updated Whirlpool OEM part number that superseded the original W10112954. Both refer to the identical drum belt included in this kit.
Should I also replace the drum rollers at the same time?
It depends on the condition of your rollers. Since the dryer is already fully disassembled, it is a good opportunity to inspect the drum support rollers for flat spots, cracks, or wobbling. If they show any wear, replacing them at the same time is recommended to avoid a third disassembly. Check your model's roller part number before ordering.
Are these OEM or aftermarket parts?
Both parts in this kit are aftermarket replacements built to OEM-equivalent quality standards. They are not genuine Whirlpool OEM parts, but are manufactured to match the dimensions and performance of the original WPW10112954 belt and W10837240 idler pulley assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4681EA2001T Washer Drain Pump Motor
The XPARTCO 4681EA2001T is an aftermarket replacement drain pump motor assembly compatible with a wide range of LG and Kenmore front-load washers. The drain pump motor forces water out of the washer drum through the drain hose during and after the wash and spin cycles — when it fails, the washer will not drain, will display an OE error code, leave standing water in the drum, or produce a loud humming or grinding noise during the drain phase.
This drain pump motor is rated at 120V–127V, 60Hz, 85W, 1.4A with a flow rate of 45 liters per minute and a spin speed of 1,100–1,200 RPM. It is made from durable metal and ABS plastic and includes the pump impeller and a removable filter housing with sealing ring for quieter, smoother operation. Note: this is the motor assembly only — it reuses the existing pump housing from your washer. It directly replaces 4681EA2001N, 4681EA1007G, 4681EA1007D, AP5328388, and several additional cross-reference numbers. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 4681EA2001T Washer Drain Pump Motor fixes LG and Kenmore front-load washers showing OE error codes, not draining, leaving standing water, or making loud humming or grinding sounds during the drain cycle. Rated 120V–127V/60Hz/85W/1.4A, 45L/min, 1,100–1,200 RPM. Includes impeller and removable filter housing. Motor assembly only — reuses existing pump housing. Replaces 4681EA2001N, AP5328388, 4681EA1007G, and more.
Common Problems This Part Fixes
OE error code displayed — washer cannot drain within the allotted time
Washer not draining — standing water remaining in the drum after a cycle
Loud humming or buzzing during the drain cycle — motor running but impeller not turning
Grinding or rattling noise during draining — physical damage to pump components
Washer stopping mid-cycle due to a drain fault
Washer draining very slowly — worn pump motor below rated flow
Water leaking from the drain pump area
Replaces Part Numbers
This drain pump motor directly replaces the following OEM and cross-reference part numbers:
4681EA2001T, 4681EA1007G, 2003273, 4681EA1007D, 4681EA2001D, 4681EA2001N, 4681EA2001U, DP040-038, ALG51292, AH3579318, EA3579318, PD00001722, EAP3579318, AP5328388, PS3579318.
4681EA2001T is the current updated part number — it is the manufacturer-approved replacement for the older 4681EA2001N. If your washer or parts diagram shows 4681EA2001N, order 4681EA2001T.
Compatibility
This drain pump motor is compatible with select front-load washers from the following brands:
LG front-load washers — WM2xxx, WM3xxx, WM4xxx, WM5xxx, WM8xxx, WM9xxx series
Kenmore / Sears front-load washers (select LG-built models, including 796-series)
Important: This is the pump motor assembly only — it installs into your washer's existing pump housing. The pump housing is not included and is reused from your old assembly. Always verify your model number before ordering. Contact our support team if you're unsure.
Key Features
Forces water out of the drum through the drain hose during wash and spin cycles at 45 liters per minute
Rated 120V–127V, 60Hz, 85W, 1.4A — correct electrical specifications for compatible LG and Kenmore models
Spin speed: 1,100–1,200 RPM for powerful, efficient drainage
Includes pump impeller and removable filter housing with sealing ring
Removable filter housing allows easy cleaning without full pump disassembly
Sealing ring reduces vibration and noise during operation
Durable metal and ABS plastic construction — built to withstand repeated high-volume drainage cycles
Motor assembly only — installs into existing pump housing, no housing replacement needed
Resolves OE error code on compatible LG and Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
4681EA2001T
Also Replaces
4681EA2001N (updated current replacement)
Part Type
Washer Drain Pump Motor Assembly
Condition
Aftermarket Replacement
Application
LG and Kenmore Front-Load Washers
Voltage
120V – 127V AC
Frequency
60 Hz
Wattage
85W
Amperage
1.4A
Flow Rate
45 liters per minute
Spin Speed
1,100 – 1,200 RPM
Material
Metal / ABS Plastic
Includes
Motor assembly, impeller, removable filter housing, sealing ring
Note
Motor assembly only — existing pump housing is reused
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning any repair. Place towels and a shallow pan at the front of the washer to catch residual water. Open the small access panel at the lower front of the washer and drain any remaining water through the drain hose or filter port. Remove the front panel of the washer by unscrewing the top panel screws, then removing the door gasket retaining wire and door latch screws to free the front panel. With the front panel removed, the drain pump assembly is now visible at the lower front. Use a flat-head screwdriver to release the pump mounting clip, then disconnect the drain hoses using pliers to loosen the clamps. Disconnect the wire harness from the pump motor. Pull the motor assembly out of the pump housing. Install the new 4681EA2001T motor into the existing housing, reconnect the hoses and wire harness, secure the pump clip, and reassemble the front panel. Restore power and water supply, then run a drain/spin cycle to verify proper drainage. Tools needed: Phillips screwdriver, flat-head screwdriver, needle-nose pliers, slip-joint pliers, shallow pan.
Frequently Asked Questions
What is the difference between 4681EA2001T and 4681EA2001N?
These are the same drain pump motor — 4681EA2001T is the updated current part number that replaced the older 4681EA2001N. LG issued the updated number during a production cycle revision. If your washer or its documentation shows 4681EA2001N, 4681EA2001D, or any other older variant, the 4681EA2001T is the correct replacement to order.
What does the OE error code mean on an LG washer?
OE (or OE error) stands for "Outlet Error" — it means the washer was unable to drain within the expected time. Common causes include a clogged drain filter, a blocked or kinked drain hose, or a failed drain pump motor. Before replacing the motor, check and clean the drain filter and inspect the drain hose for kinks or blockages. If both are clear and the washer still shows OE, the pump motor has likely failed and needs replacement.
Does this include the pump housing?
No — the 4681EA2001T is the motor assembly only. It installs into your washer's existing pump housing, which is not included and does not need to be replaced in most cases. If your pump housing is cracked or damaged, you will need to source it separately. In most repairs, the housing is reused and only the motor assembly is replaced.
Should I check the drain filter before replacing the pump motor?
Yes — always check and clean the drain filter first. LG front-load washers have a coin trap and filter at the lower front that should be cleaned regularly. A heavily clogged filter or a foreign object jammed in the impeller can cause OE errors and loud humming without the pump motor being permanently damaged. Remove the filter, clear debris from the impeller area, and test the washer. If the problem persists after cleaning, the motor is the likely culprit.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from durable metal and ABS plastic to match the electrical specifications and performance of the original 4681EA2001T drain pump motor assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10837240 Dryer Idler Pulley
The XPARTCO W10837240 is an aftermarket replacement idler pulley assembly compatible with select Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, and Roper dryers. The idler pulley maintains correct tension on the drive belt, allowing the belt to spin the dryer drum smoothly and consistently. When the idler pulley wears out, the belt loses tension — causing squeaking, grinding noises, or a drum that stops spinning entirely.
This complete assembly includes the idler arm, pulley, and bracket — everything needed for a direct drop-in installation. The pulley is 2-1/8 inches in diameter and the overall assembly measures 6-1/4" L x 1-1/4" W x 3-7/16" H. It directly replaces OEM part numbers W10837240, W10547287, and W10547290, and fits Whirlpool-family dryers with the lint screen located inside the door. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The XPARTCO W10837240 Dryer Idler Pulley fixes dryers that are squeaking, grinding, or have a drum that won't spin due to lost belt tension. Includes idler arm, pulley, and bracket. Pulley diameter 2-1/8". Compatible with select Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, and Roper dryers. Fits models with lint screen inside the door.
Common Problems This Part Fixes
Loud squeaking or squealing noise during dryer operation
Grinding or rumbling noise as the drum rotates
Dryer drum not spinning — belt loses tension when pulley bearing fails
Belt repeatedly slipping off or breaking due to improper tension
Dryer drum turning erratically or stopping while motor continues to run
Excessive vibration or shaking during the drying cycle
Visible wear, cracking, or a pulley that no longer spins freely on its shaft
Replaces Part Numbers
This idler pulley assembly directly replaces the following OEM and cross-reference part numbers:
W10837240, W10547287, W10547290, 3387372, 3388674, W10118754, W10118756, W10837240VP, PD00025564, FIX11726337, AP5988716, PS11726337, 279640, AP3094197, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, PS334244.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric — fits models with lint screen inside door)
Maytag dryers (gas and electric)
Amana dryers
Kenmore / Sears dryers (select Whirlpool-built models)
KitchenAid dryers
Crosley dryers
Admiral dryers
Inglis dryers
Roper dryers
Important: The W10837240 fits Whirlpool-family dryers with the lint screen located inside the door. If your dryer has the lint screen on top of the cabinet, a different idler pulley may be required. Contact our support team with your model number to confirm before ordering.
Key Features
Maintains correct tension on the drive belt for smooth, consistent drum rotation every cycle
Complete assembly — includes idler arm, 2-1/8" diameter pulley, and bracket — ready to install
Overall dimensions: 6-1/4" L x 1-1/4" W x 3-7/16" H
Durable plastic and metal construction — resists wear and heat damage
Direct replacement for W10837240, W10547287, and W10547290 — no modification required
Updated design replaces older W10547287 and W10547290 assemblies
Aftermarket replacement built to OEM-equivalent quality standards
Often replaced together with the drum belt (WPW10112954 or 661570V) for a complete drum drive repair
DIY-friendly repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
W10837240
Part Type
Dryer Idler Pulley Assembly with Arm and Bracket
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Pulley Diameter
2-1/8 inches
Overall Dimensions
6-1/4" L x 1-1/4" W x 3-7/16" H
Material
Plastic / Metal
Color
White
Includes
Idler arm, pulley, and bracket assembly
Lint Screen Location
Fits dryers with lint screen inside the door
Compatible Brands
Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, Roper
Often Replaced With
WPW10112954 or 661570V Drum Belt
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen and unscrew the Phillips screws inside the lint screen housing. Use a putty knife to release the top panel clips and lift the top panel. Remove the front panel to access the drum and drive components. Release the drive belt tension by pushing the idler arm, then slide the belt off the idler pulley. Remove the mounting screw securing the old idler arm assembly and lift it out. Install the new W10837240 idler assembly, secure with the mounting screw, then re-route the drive belt around the new pulley and motor pulley. Reassemble the front panel, top panel, and restore power before running a test cycle. Tip: While the dryer is open, inspect the drum belt (WPW10112954) and drum support rollers for wear and replace if needed. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
What does the idler pulley do?
The idler pulley is a spring-tensioned wheel mounted on an arm and bracket inside the dryer. It presses against the drive belt to maintain the correct tension needed to keep the belt gripping the drum and motor pulley. Without proper tension, the belt slips, loses contact, or causes the drum to stop spinning. A worn or seized idler pulley is one of the most common causes of dryer squeaking and drum spin failure.
Does W10837240 replace W10547287 and W10547290?
Yes. The W10837240 is the updated part number that directly supersedes both the W10547287 and W10547290 idler pulley assemblies. If your dryer originally used either of those older part numbers, the W10837240 is the correct current replacement.
How do I know if my lint screen is inside the door?
Open the dryer door and look for a slot or housing just inside the door opening — typically at the top or bottom of the door opening — where you pull out the lint filter. If the filter pulls out from inside the door frame, the W10837240 is designed for your dryer style. If the lint screen pulls out from the top of the dryer cabinet, contact our support team with your model number to identify the correct idler pulley for your machine.
Should I replace the drive belt at the same time?
Yes — since the dryer is already disassembled to replace the idler pulley, it is highly recommended to also inspect and replace the drum belt (WPW10112954) at the same time. The belt and idler pulley wear together, and a worn belt on a new pulley — or vice versa — significantly shortens the life of the new part.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic and metal to match the dimensions and performance of the original W10837240 idler pulley assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WP21352320 Genuine OEM Whirlpool Washer Drive Belt
The WP21352320 is a genuine Whirlpool OEM drive belt for Whirlpool top-load washers. This belt connects the drive motor to the transmission at the bottom of the washer, and it's what actually spins the basket during the wash and spin cycles. Unlike a dryer's drum belt, which simply tumbles a drum, this washer drive belt has to transfer real torque to spin a heavy, water-filled basket, which puts it under considerably more mechanical stress.
Measuring approximately 51" long and 3/8" wide. A worn or broken belt produces a distinctive set of symptoms: the washer may not spin at all, spin only slowly, agitate poorly or not at all, fail to drain properly since the pump relies on the same drive system, or produce a burning smell or loud grinding noise as a worn belt slips against the pulley. One useful diagnostic tip worth knowing: a belt can look intact at a glance but still be worn out — if the sides of the belt appear shiny or glazed rather than matte, that's a sign of slippage-related wear even without a visible crack. It directly replaces 21001478, 21352320, 35-2073, 35-2320, AP6005822, WP21352320VP, and PS11738882.
Quick Answer
The WP21352320 Genuine OEM Whirlpool Washer Drive Belt fixes Whirlpool, Maytag, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Amana, Kenmore, KitchenAid, and Ikea top-load washers with a drum that won't spin, spins slowly, won't agitate, won't drain, or produces a burning smell or loud grinding noise. Approximately 51" long, 3/8" wide. Replaces 21001478, 21352320, 35-2073, 35-2320, AP6005822, WP21352320VP, PS11738882. A belt can look intact but still be worn out — check the sides for a shiny, glazed appearance, which indicates slippage wear even without a visible crack.
Common Problems This Part Fixes
Washer drum won't spin, or spins only slowly
Washer won't agitate during the wash cycle
Washer won't drain properly
Burning smell coming from the washer during operation
Loud grinding noise from underneath the washer
Washer that shakes or moves excessively during spin
Washer that won't start or stalls partway through a cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive belt directly replaces the following OEM and cross-reference part numbers:
WP21352320, 21352320, 21001478, 35-2073, 35-2320, 35-3662, PD00002418, EAP11738882, AP6005822, AWP46532, PS11738882, WP21352320VP
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive belt is compatible with select Whirlpool top-load washers, and also fits select Maytag, Roper, Admiral, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, and Ikea washers built on the Whirlpool platform, including model numbers such as HAV3460AWW.
Note: Always verify your full model number before ordering, since Whirlpool uses several different drive belts across its top-load washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified length, width, and material
Connects the drive motor to the transmission to spin the basket
Resolves "won't spin," "won't agitate," "won't drain," "burning smell," and "grinding noise" symptoms caused by belt failure
Approximately 51" long, 3/8" wide
Direct drop-in replacement matching the original belt routing
Replaces 21001478, 21352320, 35-2073, 35-2320, AP6005822, WP21352320VP, and PS11738882
Compatible with Whirlpool, Maytag, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Amana, Kenmore, KitchenAid, and Ikea top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP21352320
Part Type
Washer Drive Belt
Condition
Genuine OEM
Brand
Whirlpool
Application
Top-Load Washers
Length
Approx. 51 in.
Width
3/8 in.
Attaches To
Motor pulley and transmission
Repair Difficulty
Medium — basic hand tools required
Quantity
1 drive belt
Compatible Brands
Whirlpool, Maytag, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Amana, Kenmore, KitchenAid, Ikea
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Consider The Motor Pulley While You're In There Disconnect power at the outlet or shut off the circuit breaker, and shut off both the hot and cold water supply valves before beginning. Pull the washer out from the wall for full access. Wear work gloves. Locate the drive belt around the motor at the bottom of the washer. Use a flathead screwdriver or hex wrench to remove the screws holding the motor bracket in place, which releases tension on the belt. Carefully slide the motor bracket off the motor, and use pliers if needed to work the old belt off the pulley. While the bottom of the washer is accessible, this is a good time to inspect the motor pulley for wear as well, since it's a related component you'll already have exposed. Install the new WP21352320 belt around the pulley and transmission, following the same routing as the old belt, and make sure it's seated securely and tightened properly — a loose or improperly seated belt will slip and wear out quickly. Reattach the motor bracket with its screws. Restore the water supply and power, then run a test cycle to confirm the washer spins, agitates, and drains normally with no unusual noise. Tools needed: multi-bit screwdriver, hex wrench, standard pliers, work gloves.
Frequently Asked Questions
My belt looks fine — no cracks or visible damage. Could it still need replacing?
Yes, and this is a common source of confusion. A belt can appear intact with no cracks and still be worn out. Check the sides of the belt closely: if they look shiny or glazed rather than having a matte, textured surface, that glazing indicates the belt has been slipping against the pulley, which is a clear sign of wear even without visible cracking.
My washer pumps and drains but the drum spins slowly or not at all. Is this the belt?
Yes, this is one of the most direct symptoms of a worn or slipping drive belt. Since this belt is what actually transfers the motor's power to spin the basket, a worn belt can slip under load, causing slow or absent spinning even though the motor itself and the drain pump are both working normally.
Should I replace the motor pulley at the same time?
It's worth inspecting while you have the bottom of the washer accessible, even if you don't end up replacing it. A worn pulley can accelerate wear on a brand-new belt, so checking its condition during this repair is a reasonable precaution, especially if your old belt showed the glazed, slipping-related wear pattern.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original length, width, and routing configuration of the drive belt originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DD31-00005A Dishwasher Drain Pump Motor
The XPARTCO DD31-00005A is an aftermarket replacement drain pump motor for Samsung dishwashers. This pump uses an internal impeller to force wastewater out of the tub and through the drain hose during the drain phase of the wash cycle — it's the component doing the physical work every time your dishwasher empties itself between cycle stages and at the end of the wash.
Rated 120V, 0.8A. Over time, the impeller can wear down, debris can jam the motor, or the motor windings themselves can fail electrically. A failing drain pump produces a very recognizable pattern: standing water left in the tub after a cycle finishes, water leaking from underneath the dishwasher, unusually loud or grinding noise during the drain phase, or a pump that audibly tries to run for a moment and then shuts off right away without actually clearing the water. It directly replaces AP4342621 and PS4222308.
Quick Answer
The XPARTCO DD31-00005A Dishwasher Drain Pump Motor fixes Samsung dishwashers that won't drain, leave standing water in the tub, leak underneath the unit, or run unusually noisy during the drain phase. 120V, 0.8A. Replaces AP4342621, PS4222308. This is the drain pump — not the same part as the wash/circulation pump (DD31-00004B), which handles spraying water during the wash itself rather than draining it afterward.
Common Problems This Part Fixes
Dishwasher not draining — standing water left in the tub after a cycle
Water leaking from underneath the dishwasher
Unusually loud, grinding, or strange noise during the drain phase
Pump that tries to run briefly, then shuts off right away without draining
Dishwasher running noisily overall
Cycle that stalls or won't advance past the drain step
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
DD31-00005A, 1550731, DW0005A, AP4342621, ASM35435 PD00002014, PS4222308
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Samsung dishwashers, including model numbers such as:
DMR57LFB, DMR57LFS, DMR57LFW
DMR77LHB, DMR77LHS, DMR77LHW
DMR78AHB, DMR78AHS, DMR78AHW
DMT300RFB, DMT300RFS, DMT300RFW
DMT400RHB, DMT400RHS, DMT400RHW
DMT800RHB, DMT800RHS, DMT800RHW
Note — drain pump, not wash pump: This is the drain pump, which removes wastewater from the tub. It is a different part from the DD31-00004B wash/circulation pump motor, which sprays water through the spray arms during the wash itself. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pump your dishwasher needs.
Key Features
Aftermarket replacement drain pump motor — removes wastewater from the tub during the drain phase
Resolves "not draining," "standing water," "leaking underneath," and "noisy drain phase" symptoms caused by pump failure
Impeller-driven design for efficient water removal through the drain hose
Rated 120V, 0.8A
Direct drop-in replacement — matches the original mounting and hose connections
Replaces AP4342621 and PS4222308
Compatible with a range of Samsung dishwasher models
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DD31-00005A
OEM Part Number
DD31-00005A
Part Type
Dishwasher Drain Pump Motor
Condition
Aftermarket Replacement
Brand
Samsung
Function
Removes wastewater from the tub during the drain phase
Voltage
120V
Amperage
0.8 A
Related Part
DD31-00004B wash/circulation pump (different function, sold separately)
Repair Difficulty
Moderate — tight working space under the unit
Quantity
1 drain pump motor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Remove Standing Water First Unplug the dishwasher and shut off the water supply before beginning. Wear work gloves. If there's standing water left in the tub from the original failure, remove as much as possible by hand with a cup or towel before starting the repair. Access to the drain pump is typically from underneath the unit, which can mean a tight working space — pulling the dishwasher partially out from under the counter, or working from the front after removing the lower access panel, makes this considerably easier depending on your installation. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the drain hose connections from the old pump, remove its mounting screws or clips, and pull it free. Install the new DD31-00005A pump in the same position, reconnect the drain hose connections securely, and reconnect the electrical connector fully. Restore the water supply and power, then run a cycle and check underneath for leaks while confirming the tub drains completely at the end. Tools needed: Phillips screwdriver, pliers, towels or a small cup for removing standing water, work gloves.
Frequently Asked Questions
My dishwasher pump tries to run for a second, then shuts off. Is that the drain pump?
Yes, this is a documented symptom of a failing drain pump motor — one customer described exactly this pattern, where the pump attempted to run and then shut off right away without actually clearing the standing water. This typically points to a motor that's jammed, worn, or electrically failing rather than a clog, since a simple clog usually lets the motor keep running (just ineffectively) rather than shutting off immediately.
Access to my drain pump is really tight. Is that normal?
Yes, this is a common challenge with under-counter dishwasher installations — the drain pump often sits low and toward the back, and reaching it can mean working in a cramped space regardless of the model. Removing standing water first and having patience with the process makes a real difference, and pulling the unit partially forward, if your installation allows it, can improve access significantly.
Is this the same as the wash pump on my dishwasher?
No. This DD31-00005A is specifically the drain pump, which removes wastewater from the tub. Your dishwasher's separate wash/circulation pump (DD31-00004B) is what sprays water through the spray arms during the actual wash portion of the cycle. If your dishwasher isn't cleaning dishes well but drains fine, the wash pump — not this drain pump — is more likely the issue.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical rating, impeller design, and mounting configuration of the original DD31-00005A drain pump motor used in compatible Samsung dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH11X39237 Washer Drain Pump
The XPARTCO WH11X39237 is an aftermarket replacement drain pump and filter assembly compatible with select GE, GE Profile, and GE 2-in-1 Washer/Dryer Combo front-load washers in the GFW510, GFW550, GFW650, GFW655, GFW850, PFW, and PFQ series. The drain pump is responsible for removing water from the washer drum during the drain and spin cycles — when it fails, the washer will not drain, will leave standing water in the drum, or will produce unusual noises during the drain cycle.
This complete drain pump and filter assembly operates at 120V, 60Hz, 1.2A and includes the pump motor, impeller housing, and integrated filter. It directly replaces the discontinued WH11X29539 — WH11X39237 is the current manufacturer-approved updated part number. Also replaces AP6986715, 4962370, B25-3A04, and several additional cross-reference numbers. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO WH11X39237 Washer Drain Pump fixes GE front-load washers that won't drain, leave standing water in the drum, display drain error codes, or make loud humming or grinding noises during the drain cycle. Complete pump and filter assembly. 120V/60Hz/1.2A. Replaces discontinued WH11X29539. Compatible with GE GFW510, GFW550, GFW650, GFW655, GFW850, PFW, and PFQ series.
Common Problems This Part Fixes
Washer not draining — standing water remaining in the drum after a cycle
Drain error codes displayed on GE front-load washers (e.g. E23, E24, or pump-related codes)
Loud humming, grinding, or buzzing noise during the drain cycle
Washer stopping mid-cycle due to a drain fault
Water leaking from around the drain pump area
Drain pump running continuously but water not being expelled
Pump impeller jammed by debris and motor burned out
Replaces Part Numbers
This drain pump directly replaces the following OEM and cross-reference part numbers:
WH11X39237, WH11X29539, Hanyu B25-3A04, 9019841, PD00094541, AGE1260100, AP8054992, PS18351790.
WH11X39237 is the current manufacturer-approved replacement for the discontinued WH11X29539. If your appliance documentation lists WH11X29539, this is the correct updated part.
Compatibility
This drain pump is compatible with select front-load washers and laundry combos from the following GE product lines:
GE front-load washers — GFW510 series
GE front-load washers — GFW550 series
GE front-load washers — GFW650 series
GE front-load washers — GFW655 series
GE front-load washers — GFW850 series
GE Profile front-load washers — PFW870, PFW950, PFW955 series
GE Profile front-load washers — PFQ83 series
GE 2-in-1 Washer/Dryer Combo (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Complete drain pump and filter assembly — pump motor, impeller housing, and integrated filter all included
Removes water from the drum during drain and spin cycles for proper washer operation
Integrated filter traps lint, coins, and debris to prevent pump impeller damage and clogs
Electrical specs: 120V, 60Hz, 1.2A — correct for compatible GE front-load models
WH11X39237 is the current manufacturer-approved replacement for discontinued WH11X29539
Direct replacement — installs into existing pump housing with no modification required
Aftermarket replacement built to OEM-equivalent quality standards
Compatible with GFW510, GFW550, GFW650, GFW655, GFW850, PFW, and PFQ series
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
WH11X39237
Supersedes
WH11X29539 (discontinued)
Part Type
Washer Drain Pump and Filter Assembly
Condition
Aftermarket Replacement
Application
GE Front-Load Washers and 2-in-1 Washer/Dryer Combos
Voltage
120V AC
Frequency
60 Hz
Amperage
1.2A
Includes
Pump motor, impeller housing, and integrated filter
Compatible Series
GFW510, GFW550, GFW650, GFW655, GFW850, PFW870, PFW950, PFW955, PFQ83
Compatible Brands
GE, GE Profile
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning any repair. Place towels and a shallow pan under the pump access area to catch residual water. Remove the front lower access panel of the washer. Before removing the pump, first clean the pump filter (WH23X38617) and check for a clogged filter or debris in the pump housing — a jammed impeller is sometimes mistaken for a failed pump. If the pump motor is confirmed failed, disconnect the wire harness and drain hoses from the old pump assembly, then unscrew or unclip the pump from the mounting bracket. Install the new WH11X39237 pump assembly, reconnect the drain hoses and secure with clamps, reconnect the wire harness, and reinstall the access panel. Restore power and water supply, then run a drain-only cycle to verify proper drainage and check for leaks. Tools needed: Phillips screwdriver, pliers, shallow pan or towels.
Frequently Asked Questions
What is the difference between WH11X39237 and WH11X29539?
These are the same drain pump assembly — WH11X39237 is the current updated part number that GE issued to replace the discontinued WH11X29539. If your washer's documentation, parts diagram, or old pump label shows WH11X29539, the WH11X39237 is the correct replacement to order.
Should I check the pump filter before replacing the drain pump?
Yes — always check and clean the pump filter (WH23X38617) before replacing the drain pump. A heavily clogged filter can restrict water flow enough to mimic pump failure symptoms, and a foreign object jammed in the impeller can stall the pump motor without permanently damaging it. Remove the filter, clear any debris from the housing and impeller, and test the washer again. If the pump still fails to drain after cleaning, then pump replacement is the next step.
How do I know if my drain pump has failed?
A failed drain pump typically causes the washer to stop mid-cycle with a drain error code, or to finish a cycle with standing water in the drum. You may also hear a loud humming noise during the drain phase — this indicates the motor is running but the impeller is not turning (jammed or broken). A grinding noise suggests physical damage to the impeller or pump housing. If the pump is completely silent during the drain cycle despite power being delivered to it, the motor has likely burned out.
Is the WH11X39237 compatible with GE Profile and GE 2-in-1 models?
Yes — the WH11X39237 is compatible with select GE Profile front-load washers in the PFW870, PFW950, PFW955, and PFQ83 series, as well as select GE 2-in-1 Washer/Dryer Combo models. Always verify your specific model number before ordering to confirm compatibility.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the electrical specifications and physical dimensions of the original WH11X39237 drain pump assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO Dryer Repair Set
XPARTCO EXP526 Dryer Belt and Idler Pulley Set
2-piece drum drive repair set replacing 661570V and W10837240 on compatible Whirlpool-built dryers.
Product Overview
The XPARTCO EXP526 Dryer Belt and Idler Pulley Set combines two common dryer drive-system wear parts in one repair package: a drum drive belt and a complete idler pulley assembly with arm/bracket.
The belt transfers motor power to the dryer drum, while the idler assembly maintains the proper belt tension needed for smooth drum rotation.
Quick Answer
EXP526 includes 2 pieces: one 661570V-style drum belt and one W10837240-style idler pulley assembly. The belt is approximately 93-1/2 inches long, 1/4 inch wide, with 4 ribs and 3 grooves.
Common Problems This Kit May Fix
Dryer drum will not turn
Broken or stretched drum belt
Squealing or chirping from the idler area
Intermittent drum rotation
Belt slipping or running loose
Worn or seized idler pulley
Replaces and Cross-References
WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, PD00002505, EAP11742271, AP6009126, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, PD00023608, AP5983729, PS11722115, W10837240, W10547287, W10547290, 3387372, 3388674, W10118754, W10118756, W10837240VP, PD00025564, FIX11726337, AP5988716, PS11726337, 279640, AP3094197, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, PS334244
Cross-reference numbers are provided for identification. XPARTCO is an aftermarket replacement brand and is not manufactured by Whirlpool Corporation.
Compatibility
Fits select Whirlpool-built dryers using both the 661570V belt and W10837240 idler assembly. Verified examples include:
WED8300SW0
MEDB750YW0
NED7300WW1
110.C87571601
110.C87566601
110.C96562500
Important: This is only a partial model list. Some similar dryers use a different belt or idler design. Verify the complete dryer model number and original part numbers before ordering.
Key Features
Complete 2-piece drive repair set
Includes drum belt and idler pulley assembly
Idler includes pulley wheel, arm/bracket and axle
Helps restore proper drum rotation and belt tension
Quality XPARTCO aftermarket replacement
Product Specifications
Kit Number
EXP526
Brand
XPARTCO
Kit Contents
1 Drum Belt + 1 Idler Pulley Assembly
Belt Reference
661570V
Belt Length
Approx. 93-1/2 in.
Belt Width
Approx. 1/4 in.
Belt Rib/Groove
4 Ribs / 3 Grooves
Idler Reference
W10837240
Idler Type
Complete Pulley with Arm/Bracket
Condition
New Aftermarket Replacement
Installation Notes
Disconnect the dryer from electrical power before service. Shut off the gas supply on gas dryers.
Access the drum drive system according to the appliance service procedure.
Note the original belt routing around the motor pulley and idler before removal.
Install the idler assembly securely and confirm the pulley rotates freely.
Install the new belt with the ribbed side against the drum and motor pulley.
Route the belt through the idler correctly so proper tension is applied.
Rotate the drum by hand before reassembly to confirm smooth belt tracking.
Diagnostic tip: If a belt failed prematurely, inspect the drum rollers, motor pulley, drum alignment, and idler system before returning the dryer to service.
FAQ
What is included in EXP526?
One 661570V-style drum drive belt and one W10837240-style complete idler pulley assembly.
How many ribs does the belt have?
The 661570V-style belt has 4 ribs and 3 grooves and is approximately 93-1/2 inches long.
Is this a Genuine Whirlpool OEM kit?
No. EXP526 is a quality XPARTCO aftermarket replacement set designed to replace the listed OEM part numbers.
Will it fit every Whirlpool dryer?
No. Whirlpool-built dryers use multiple belt and idler designs. Verify your complete model number and the original belt/idler part numbers before ordering.
Shop With Confidence
Confirm your dryer model number before ordering. Compatibility support is available to help verify the correct belt and idler combination.
XPARTCO Replacement2-Piece Drive KitCompatibility SupportFast U.S. Shipping
