285727 Washer Agitator Assembly
Fits Specific Top Load Washer Models.
Replaces Part Number: 285727, 285559, 295559, 3347674, 3361598, 470865, AH334617, EA334617, AP3094515, PS334617.
Description: The Agitator is a Genuine OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles.
WP389386 Washer Lower Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP389386, 389386, 2418, 99989683, AP6008839, PS11741980.
Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.
Genuine OEM Whirlpool Washer Part
WP3951632 Washer Genuine OEM Lower Agitator
The lower agitator base moves back and forth during the wash cycle to help circulate clothing through the water and detergent.
Product Overview
The Whirlpool WP3951632 Washer Lower Agitator is the lower half, or base, of the agitator used in compatible top-load washing machines. During the wash cycle, the agitator moves back and forth to circulate clothing through the wash water and detergent for effective cleaning.
This is a new Genuine OEM Whirlpool replacement part manufactured to the original equipment specifications for proper fit and operation in compatible models.
Quick Answer
WP3951632 is the Genuine OEM Whirlpool lower agitator base for select top-load washers. It replaces part number 3951632. This listing is for the lower agitator only; the upper agitator, agitator dogs, cam, cap, bolt, dispenser, and other hardware are not included unless specifically shown in the product photographs.
Common Problems This Part May Fix
Washer fills and runs but clothing is not agitated properly
Lower agitator does not move during the wash cycle
Cracked, broken, or damaged agitator fins
Worn or stripped center connection on the agitator base
Agitator slips on the transmission shaft
Poor washing or uneven clothing movement
Replaces and Cross-References
WP3951632, 3951632, 547649, AP6008904, AWP47252, EAP11742045, PD00004360, PS11742045.
WP3951632 is the current manufacturer part number. Other numbers shown are previous manufacturer or retailer cross-reference numbers used to identify the same lower agitator.
Compatibility
Designed for select Whirlpool-built top-load washers, including certain models sold under the Whirlpool, Amana, Crosley, Estate, Inglis, and Kenmore brand names. Confirmed model examples include:
WTW4800BQ1
WTW4816FW1
WTW4816FW3
WTW4850XQ3
LSQ9010PW3
7MWTW1701DQ1
3RGSC9455JQ1
110.20232711
VAW3584GW0
Important: This is only a partial compatibility list. Agitators can look similar but use different shaft connections, heights, fins, and internal components. Verify the complete washer model number before ordering.
Key Features
Genuine OEM Whirlpool replacement part
Lower agitator base for compatible top-load washers
Moves clothing through wash water and detergent
Durable molded construction
Designed for original fit and operation
Direct replacement when WP3951632 is specified
Replaces original part number 3951632
Product Specifications
Manufacturer Part Number
WP3951632
Brand
Whirlpool
Part Type
Washer Lower Agitator / Agitator Base
Condition
New
Quality
Genuine OEM
Application
Top-Load Washing Machine
Primary Function
Moves clothing through wash water during agitation
Included
One Lower Agitator Base
Installation Notes
Unplug the washer before beginning the repair.
Remove the fabric-softener dispenser or agitator cap, if installed.
Remove the inner cap or seal to access the agitator retaining bolt.
Use the correct socket and extension to remove the center retaining bolt.
Lift the agitator assembly from the washer and separate the upper agitator from the lower base as required.
Inspect the agitator bolt, thrust washer, cam, agitator dogs, upper agitator, and transmission shaft for additional wear.
Install the new lower agitator in the same position, tighten the retaining bolt securely, and reinstall all caps or dispenser components.
Installation tip: A washer that does not agitate can also have worn agitator dogs, a damaged cam, a loose bolt, a failed drive component, or a transmission problem. Diagnose the appliance before ordering when the cause is uncertain.
Frequently Asked Questions
Is WP3951632 a genuine Whirlpool part?
Yes. WP3951632 is a Genuine OEM Whirlpool replacement lower agitator.
Does this listing include the complete agitator assembly?
No. This part is the lower agitator base only. The upper agitator, cam, agitator dogs, cap, dispenser, bolt, and related hardware are separate unless specifically shown or stated.
What part number does WP3951632 replace?
WP3951632 replaces the previous manufacturer part number 3951632.
Will this fit every Whirlpool washer?
No. It fits only select top-load washer models. Verify your complete model number and required manufacturer part number before purchasing.
Should I replace the agitator dogs at the same time?
Inspect the agitator dogs and cam while the agitator is disassembled. Replace them separately if they are worn, rounded, cracked, or slipping.
Shop With Confidence
Purchase the correct Genuine OEM replacement part for dependable fit and performance. Verify your washer model number before ordering, and contact our parts team when compatibility assistance is needed.
Genuine OEM WhirlpoolFast U.S. ShippingCompatibility SupportSecure Checkout
WP3347288 Washer Lower Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP3347288, 3347288, 3348245, 3352107, 519233, AP6008022, PS11741151.
Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.
WP3363003 Washer Upper Agitator
Fits Specific Top Load Washer Models.
Replaces Part Number: WP3363003, 3363003, 2654, AP6008106, PS11741237.
Description: The Upper Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines.
285751 Washer Genuine Agitator Dog Cam Kit
Replaces Part Numbers: 285751, 2837, 3351019, 387092, 3947410, AH334624, EA334624, OEM9283568, AP3094521, PS334624.
Description: This Agitator Kit is an OEM replacement part for specific Whirlpool top-loading washer models. Installed in the center of the wash basket, it aids in the mechanical agitation central to regular laundry cleaning.It contains the plastic cam and four plastic dogs needed to repair a malfunctioning or noisy agitator during the wash cycle.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WPW10352973 Washer Genuine Dispenser Actuator
Dispenser Drawer Switch Actuator for Washer
Replaces Part Numbers: WPW10352973, W10352973, W10065190, W10163975, W10283468, 8183186, AP6020256, PS11753574.
✅ Product Description:
Restore proper detergent dispensing with this genuine OEM WPW10352973 washer dispenser actuator. Designed to control the flow of detergent and fabric softener into your wash cycle, this part is a direct replacement for worn or non-functioning actuators in many Whirlpool, Maytag, Amana, Kenmore, and Crosley top-load washing machines.
Part Features:
Genuine OEM quality – built to factory specs
Replaces part numbers: WPW10352973, W10352973, W10065190, W10163975, W10283468, 8183186, AP6020256, PS11753574.
Controls dispenser drawer movement for proper release timing
Easy to install with basic tools
Fixes the following symptoms:
Dispenser drawer not opening
Detergent or softener not dispensing
Error codes related to actuator failure
Inconsistent or incomplete wash cycles
Compatible with:Many models from Whirlpool, Maytag, Kenmore, Amana, and more.(Check model number before ordering or contact us for fitment help.)
✅ Why Buy from Parts-O-Matic?
Guaranteed OEM-quality parts
Always Fast and Free U.S. shipping
Competitive pricing
Expert support for part compatibility
🛒 Get your washer working like new – order the WPW10352973 Dispenser Actuator now at Parts-O-Matic.com, and enjoy fast, free shipping with no minimum.
WH03X36897 Washer Genuine OEM Mode Shifter Actuator – Compatible with GE & Hotpoint Washers
Product Description
Restore proper wash and spin operation with the WH03X36897 Washer Genuine OEM Mode Shifter Actuator. This factory-approved component shifts the washer between agitation and spin modes during the wash cycle. A failing mode shifter can cause the washer to agitate but not spin, spin improperly, make clicking noises, or display cycle errors. Replacing it with this Genuine OEM actuator ensures precise shifting, reliable performance, and correct cycle operation.
Replaces Part Numbers
WH03X36897, WH18X27186, AP7225424, PD00087767, EAP17626543, PS17626543
Compatibility
This Genuine OEM mode shifter actuator fits select GE and Hotpoint top-load washers.
Example compatible models include (but are not limited to):GE GTW335ASN1WW, GTW465ASN2WW, GTW485ASJ1WSHotpoint HTW240ASK6WS
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for exact fit and dependable operation
🔄 Accurate Mode Shifting – Properly switches between wash and spin cycles
🔇 Quiet, Smooth Operation – Reduces clicking or erratic shifting noises
💪 OEM-Grade Durability – Designed for long service life under repeated cycles
🛡️ Fixes Common Issues – Solves no-spin, improper agitation, or cycle errors
📐 Product Specification
Part Number: WH03X36897
Component Type: Washer Mode Shifter Actuator
Voltage: 120V AC
Mounting: Direct-fit installation on transmission assembly
Function: Controls agitation-to-spin shifting
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Steps:
Disconnect power and tilt the washer back for bottom access.
Locate the mode shifter actuator near the transmission.
Disconnect the wiring harness and remove mounting screws.
Install the new WH03X36897 actuator and secure it in place.
Reconnect wiring, return washer upright, and restore power.
Run a test cycle to confirm proper shifting.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Restore correct washer cycle operation — Add to Cart Now for a factory-quality repair!
WP389140 Genuine OEM Whirlpool Washer Drive Block
The WP389140 is a genuine Whirlpool OEM drive block for large-capacity belt-drive and direct-drive top-load washers. This is a purely mechanical coupling component: it connects the inner spin basket to the transmission's drive shaft, so that when the transmission turns, the basket turns with it. Without a properly seated drive block, the connection between the motor's rotational power and the basket is lost or unreliable, even though every electrical component in the washer may be working perfectly.
Measuring approximately 2-5/16" high, this drive block is a wear component subject to gradual mechanical stress every time the washer agitates or spins. A worn or failed drive block produces a distinctive set of symptoms: the basket may spin freely without properly engaging, the washer may spin slowly and leave clothes excessively wet, or you may hear a loud knocking or banging noise during operation as the connection between the basket and drive shaft becomes loose or worn. It directly replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858.
Quick Answer
The WP389140 Genuine OEM Whirlpool Washer Drive Block fixes Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis top-load washers with a basket that spins freely without engaging, slow spinning that leaves clothes excessively wet, or loud knocking/banging noise during operation. Approximately 2-5/16" high. For large-capacity belt-drive and direct-drive washers. Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, 2858. This repair typically requires a spanner wrench to remove a large securing nut — budget for the right tool before starting.
Common Problems This Part Fixes
Washer basket spins freely without properly engaging during the wash or spin cycle
Washer spins slowly, leaving clothes excessively wet at the end of a cycle
Loud knocking or banging noise during operation
Washer shakes or moves noticeably during spin
Basket continues spinning after the cycle should have stopped
Inefficient wash and spin cycles overall due to poor basket engagement
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive block directly replaces the following OEM and cross-reference part numbers:
WP389140, 389140, 357782, 97360, PD00002363, EAP11741977, WP389140VP, AP6008836, AWP47839, J27-936, PS11741977.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive block is compatible with select Whirlpool large-capacity top-load washers (belt-drive and direct-drive), and also fits select Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers built on the Whirlpool platform, including model numbers such as:
NTW4516FW, NTW4516FW3, NTW4516FW4
WTW4816FW2, WTW4816FW3
RTW4516FW, NTW4605EW, WTW4800BQ
Note: Always verify your full model number before ordering, since Whirlpool uses different drive block designs across its washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified fit for a secure basket-to-transmission connection
Connects the inner spin basket to the transmission's drive shaft
Resolves "basket spins freely," "slow spin, clothes too wet," and "loud knocking noise" symptoms caused by drive block wear
Approximately 2-5/16" high
Designed for large-capacity belt-drive and direct-drive washer platforms
Direct drop-in replacement matching the original fit onto the spin tube notches
Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP389140
Part Type
Washer Drive Block
Condition
Genuine OEM
Brand
Whirlpool
Application
Large-Capacity Belt-Drive and Direct-Drive Top-Load Washers
Height
Approx. 2-5/16 in.
Function
Connects the inner spin basket to the transmission drive shaft
Related Component
Drive cam (commonly inspected/replaced during the same repair)
Repair Difficulty
Moderate — spanner wrench and washer disassembly required
Quantity
1 drive block
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, Inglis
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Spanner Wrench Required Disconnect power at the outlet or shut off the circuit breaker, and shut off the hot and cold water supply valves before beginning. Wear work gloves. Remove the washer's top and control console per your model's service instructions to access the inner tub assembly. Remove the agitator and any hardware securing the basket, which typically includes a large center nut — a spanner wrench is required to remove this nut, along with a socket and long extension for other fasteners; expect to remove a fair number of components to fully access the drive block. Lift the wash basket out to expose the drive block, which sits on the spin tube near the center of the transmission. Photograph the orientation of the old drive block and any surrounding hardware before removing it. Lift the old drive block free, and while it's accessible, inspect the drive cam nearby for wear as well, since it's commonly replaced at the same time. Slide the new WP389140 drive block into position, making sure it seats fully onto the spin tube notches, and reassemble the basket, hardware, agitator, console, and top panel in reverse order. Restore water and power, then run a test cycle through both wash and spin to confirm the basket engages properly with no unusual noise. Tools needed: multi-screwdriver, spanner wrench, socket set with long extension, work gloves.
Frequently Asked Questions
My washer basket spins freely and doesn't seem connected to anything. Is this the drive block?
Yes, this is the classic symptom of a failed drive block. Since this component is the mechanical link between the transmission's drive shaft and the inner spin basket, once it wears out or fails, the basket can spin independently without properly engaging, even though the motor and transmission are working normally.
Do I really need a spanner wrench for this repair?
Yes, on most models. Accessing the drive block requires removing a large nut that secures the basket assembly, and this nut is specifically designed to be removed with a spanner wrench rather than a standard socket. Trying to remove it without the correct tool risks damaging the nut or the surrounding components, so it's worth having one on hand before you start.
Should I replace the drive cam at the same time?
It's worth inspecting while you have the assembly open, since the drive cam sits in the same area and is commonly replaced alongside the drive block when a technician is already this far into the repair. If it shows visible wear, replacing both at once saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original dimensions and fit of the drive block originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ACP72929002CM Washer Shift Actuator
Coupling Assembly Shift actuator.
Fits specific LG top load washer models.
Replaces Part Numbers: ACP72929002, 4323EA2001C, 1958330, 2653835, ACP73029001, AH3522903, EA3522903, 4323EA2001B, 1327673, AH3577589, EA3577589, AP5674447, AP5258825, PS7786658, PS3522903, AP5245586, PS3577589
Description: This Top Load Washer Coupling Assembly is a replacement component specifically designed for specific LG brand top-loading washing machine models. This assembly connects the agitator shaft to the transmission inside the washer, allowing oscillating motions to be transferred through the transmission from the motor.
This is an aftermarket part that can be used as a replacement for the OEM part.
3360629 Washer Transmission Gearcase
Description: The Transmission is an OEM part for Whirlpool washing machines. This integral component is at the heart of the washing machine's operation, translating the motor's power into action by driving the agitator and spinning the drum. Regular inspection and maintenance can prolong the life of the transmission, but if these symptoms occur, it may be time to replace this critical component.
Replaces Part Number: 3360629, W10140307, 285362, 62621, 8546456, W10172898, WP62621, WP8546456, 285194, 285291, 285312, 285392, 285515, 3349296, 3360263, 3360629R, 3360630, 388763, 389229, 389230, 389244, 389246, 3946631, 3947637, 3949609, 423, 62528, 62531, 62534, 62570, 62668, 62680, 63025, 63167, 63320, 63563, 63910, 63999, 8532118, 99890390, 99890391, AH341974, EA341974, AP3096209, PS341974, W10140301, W10140304, W10155438, W10251783, W10251785.
