WH03X36897 Washer Genuine OEM Mode Shifter Actuator – Compatible with GE & Hotpoint Washers
Product Description
Restore proper wash and spin operation with the WH03X36897 Washer Genuine OEM Mode Shifter Actuator. This factory-approved component shifts the washer between agitation and spin modes during the wash cycle. A failing mode shifter can cause the washer to agitate but not spin, spin improperly, make clicking noises, or display cycle errors. Replacing it with this Genuine OEM actuator ensures precise shifting, reliable performance, and correct cycle operation.
Replaces Part Numbers
WH03X36897, WH18X27186, AP7225424, PD00087767, EAP17626543, PS17626543
Compatibility
This Genuine OEM mode shifter actuator fits select GE and Hotpoint top-load washers.
Example compatible models include (but are not limited to):GE GTW335ASN1WW, GTW465ASN2WW, GTW485ASJ1WSHotpoint HTW240ASK6WS
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for exact fit and dependable operation
🔄 Accurate Mode Shifting – Properly switches between wash and spin cycles
🔇 Quiet, Smooth Operation – Reduces clicking or erratic shifting noises
💪 OEM-Grade Durability – Designed for long service life under repeated cycles
🛡️ Fixes Common Issues – Solves no-spin, improper agitation, or cycle errors
📐 Product Specification
Part Number: WH03X36897
Component Type: Washer Mode Shifter Actuator
Voltage: 120V AC
Mounting: Direct-fit installation on transmission assembly
Function: Controls agitation-to-spin shifting
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Steps:
Disconnect power and tilt the washer back for bottom access.
Locate the mode shifter actuator near the transmission.
Disconnect the wiring harness and remove mounting screws.
Install the new WH03X36897 actuator and secure it in place.
Reconnect wiring, return washer upright, and restore power.
Run a test cycle to confirm proper shifting.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Restore correct washer cycle operation — Add to Cart Now for a factory-quality repair!
XPARTCO 285753A Washer Direct Drive Motor Coupler
The XPARTCO 285753A is an aftermarket replacement direct drive motor coupler (also called a motor coupling or drive coupler) compatible with a wide range of Whirlpool-family top-load washers including Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The motor coupler connects the drive motor shaft to the transmission — transferring the motor's power to the transmission to drive the agitator and spin the drum during wash and spin cycles. It is a deliberate weak point in the drivetrain: if the washer is overloaded, the coupler breaks apart first, protecting the far more expensive motor and transmission from damage.
This is the updated 285753A design with metal sleeves for added strength — it replaces all previous coupler styles and versions including the original 285753, 280152, 285743, and 285140. This kit includes 2 plastic coupling halves and 1 rubber isolation dampener. Dimensions approximately 2" L x 1-1/4" W x 2" H. Fits direct-drive top-load washers only — not compatible with belt-drive machines. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 285753A Washer Motor Coupler fixes top-load washers that fill and drain normally but will not agitate or spin. The motor coupler connects the motor to the transmission — when it breaks, the motor runs but neither the agitator nor the drum moves. Kit includes 2 plastic coupling halves and 1 rubber dampener. Updated design with metal sleeves. Replaces all previous coupler versions including 285753, 280152, 285743, 285140. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, and more direct-drive top-load washers.
Common Problems This Part Fixes
Washer fills with water and drains but will not agitate or spin
Motor runs (you can hear it) but agitator and drum do not move
Washer spins slowly or incompletely — clothes still very wet after spin cycle
Loud humming or buzzing from the motor area without agitation or spin
Burning rubber or plastic smell during the wash or spin cycle
Washer shakes excessively — broken coupler causing uneven power transfer
Broken plastic or rubber pieces visible inside the bottom of the washer cabinet
Replaces Part Numbers
This motor coupler directly replaces the following OEM and cross-reference part numbers:
285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AWP39583, PD00002353, AH1485646, EAP1485646, EA1485646, TJ285753, ER285753, AP3963893, PS1485646.
The 285753A replaces all previous motor coupler styles and versions. If your parts diagram shows any of the older numbers above, the 285753A is the correct current replacement.
Compatibility
This motor coupler is compatible with select direct-drive top-load washers from the following brands:
Whirlpool top-load washers (direct drive — no belt)
Kenmore / Sears top-load washers — 70 series, 80 series, 90 series, and 110 series (Whirlpool-built)
KitchenAid top-load washers
Maytag top-load washers (direct drive models)
Amana top-load washers
Roper top-load washers
Admiral top-load washers
Estate top-load washers
Crosley top-load washers
Inglis top-load washers
Magic Chef top-load washers
Important: The 285753A is for direct-drive top-load washers only — machines where the motor connects directly to the transmission without a belt. It is not compatible with front-load washers or older belt-drive top-load washers. If you can see a drive belt inside your washer cabinet, this is not the correct part.
Key Features
Connects the drive motor shaft to the transmission — transfers motor power to drive the agitator and spin drum
Intentional sacrificial part — designed to break before the motor or transmission during overload, saving far more expensive components
Updated 285753A design with metal sleeves — stronger than original all-plastic versions; replaces all previous coupler styles
Kit includes 2 plastic coupling halves and 1 rubber isolation dampener — complete assembly
Dimensions: approximately 2" L x 1-1/4" W x 2" H
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef direct-drive washers
Replaces all previous coupler versions including 285753, 280152, 285743, and 285140
Aftermarket replacement built to OEM-equivalent quality standards
Cost-effective DIY repair — typically under $15 and 30–45 minutes of work
Product Specifications
Part Number
285753A
Part Type
Washer Direct Drive Motor Coupler (Motor Coupling Kit)
Condition
Aftermarket Replacement
Application
Direct-Drive Top-Load Washers (no belt)
Dimensions
Approx. 2" L x 1-1/4" W x 2" H
Color
Black / Off-White
Material
Rubber / Plastic / Metal (metal sleeve inserts)
Kit Includes
2 plastic coupling halves, 1 rubber isolation dampener
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Remove the washer's cabinet by releasing the top panel clips and removing the front panel screws — the motor and transmission are at the bottom of the machine. The motor coupler is a three-piece assembly between the motor shaft and the transmission input shaft. Pull the motor forward to release it from the mounting clips. The broken coupler pieces will likely fall out at this point — inspect the motor shaft and transmission shaft for any remaining plastic debris and clear it. Press the new rubber dampener onto the motor shaft coupling half first, then onto the transmission shaft coupling half, and snap the motor back into the mounting clips. Verify both coupler halves are seated securely and the rubber dampener is centered between them. Reassemble the front panel and top panel. Restore power and run a short cycle to confirm the agitator and spin function normally. Work gloves recommended — sharp sheet metal edges inside the cabinet. Tools needed: Phillips screwdriver, 1/4" nut driver, flat-head screwdriver, work gloves.
Frequently Asked Questions
What does the motor coupler do?
The motor coupler is a three-piece assembly — two plastic coupling halves and a rubber dampener — that connects the drive motor shaft to the transmission input shaft in direct-drive washing machines. The motor spins the coupler, which transfers that rotation to the transmission, which in turn drives the agitator and drum. The rubber dampener absorbs shock and vibration between the rigid motor and transmission shafts during direction changes. The coupler is intentionally designed as the weakest link in the drivetrain — if the washer is overloaded or the transmission seizes, the coupler breaks first to protect the far more expensive motor and transmission from damage.
My washer fills and drains but won't agitate or spin — is the motor coupler the cause?
Yes — this is the classic symptom of a broken motor coupler. Because the pump is typically driven directly by the motor before the coupler connection, a broken coupler allows the motor to run and the pump to drain normally, but neither the agitator nor the spin drum receives any power. If you can hear the motor running but nothing moves, open the washer cabinet and inspect the coupler — you will likely find broken plastic pieces at the bottom of the cabinet near the motor and transmission.
Why does the motor coupler break?
The most common cause is overloading — packing too many heavy items into the washer creates enough mechanical resistance that the coupler snaps rather than allowing the motor to be damaged. Other causes include a worn or seized transmission, a worn motor, normal wear over many years of use, or a single sudden jam caused by a foreign object. If your coupler breaks a second time shortly after replacement, inspect the transmission for signs of wear or binding — a stiff or seized transmission will continue to break new couplers.
What is the difference between 285753 and 285753A?
The 285753A is the updated current version that superseded the original 285753. The A version incorporates metal sleeve inserts in the plastic coupling halves for improved strength and durability compared to the original all-plastic design. The 285753A replaces all previous versions — including 285753, 280152, 285743, and 285140 — and is the correct part to order regardless of which older number is listed in your washer's parts diagram.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and performance of the original 285753A motor coupler.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH03X30517 Washer Shift Actuator
The XPARTCO WH03X30517 is an aftermarket replacement shift actuator (mode shifter) for GE top-load washers, and also fits select Hotpoint and Kenmore models. Mounted at the bottom of the washer, this actuator changes the function of the washer's motor between agitation and spin cycles, effectively managing the conversion from agitation to high-speed rotation that removes moisture from clothing at the end of the wash.
Made mostly of plastic, with two mounting holes and a single wire harness connection. Over time, the actuator's internal motor can burn out or fail electrically. Symptoms of a failing shift actuator include the washer failing to switch between agitation and spin modes, the washer not spinning or agitating at all, abnormal noise or grinding during the cycle, or clothes coming out still soggy after a completed wash. It directly replaces WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752.
Quick Answer
The XPARTCO WH03X30517 Washer Shift Actuator fixes GE, Hotpoint, and Kenmore top-load washers that won't switch between agitation and spin, won't spin or agitate at all, or leave clothes still soggy after a wash. Sold individually. Replaces WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752. If your washer agitates and spins fine individually but still won't switch between the two modes after replacing this actuator, the underlying cause may lie elsewhere — one customer found this exact residual symptom after installing this part.
Common Problems This Part Fixes
Washer won't switch between agitation and spin modes
Washer not spinning or agitating at all
Abnormal noise or grinding during the wash cycle
Clothes still soggy after a completed wash cycle
No clicking sound heard when the washer attempts to change modes
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer shift actuator directly replaces the following OEM and cross-reference part numbers:
WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This shift actuator is compatible with select GE top-load washers, and also fits select Hotpoint and Kenmore washers built on the GE platform, including model numbers such as:
GTW680BSJ0WS, GTW680BSJ1WS, GTW680BSJ2WS, GTW680BSJ3WS, GTW680BSJ4WS, GTW680BSJ5WS, GTW680BSJ6WS, GTW680BSJ7WS
GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW220ACK7WW
GTW540ASP0WS, GTW540ASP1WS, GTW465ASN2WW, GTW500ASN1WS, GTW685BSL2WS
YTW4514SN0WS, YTW4514SN1WS, YTW4514PN0DG, YTW4514PN1DG
GTW335ASN0WW, GTW335ASN2WW, GTW460AMJ2WW, GTW750CPL0DG
GTW490ACJ1WW, GTW490ACJ1WS, GTW490ACJ6WW, GTW490ACJ6WS
HTW200ASK0WW, HTW200ASK1WW, HTW200ASK2WW, HTW200ASK3WW, HTW200ASK4WW
HTW240ASK0WS, HTW240ASK1WS, HTW240ASK2WS, HTW240ASK3WS, HTW240ASK4WS, HTW240ASK5WS, HTW240ASK6WS
Note: This is the standalone shift actuator only, sold individually. A related but separate combined kit exists that also includes a shift clutch (WH05X24185); if you also need the clutch, order it separately. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement shift actuator (mode shifter) — switches the motor between agitation and spin
Resolves "won't switch modes," "won't spin or agitate," and "clothes still soggy" symptoms caused by actuator failure
Mostly plastic construction, two mounting holes, single wire harness
Direct drop-in replacement matching the original mounting
Replaces WH03X30517, WH05X24435, WH05X25036, 290D1056G001, 4588015, 4961069, AP7014559, AGE25894, PD00068062, EAP16554752, PS16554752
Compatible with GE, Hotpoint, and Kenmore top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Sold individually
Typical repair takes 15 to 30 minutes
Product Specifications
Part Number
XPWH03X30517
OEM Part Number
WH03X30517
Part Type
Washer Shift Actuator (Mode Shifter)
Condition
Aftermarket Replacement
Material
Plastic
Mounting
Two screw holes
Wiring
Single wire harness
Related Part
WH05X24185 shift clutch (sold separately)
Repair Difficulty
Easy to Moderate — 15 to 30 minutes
Quantity
1 shift actuator (sold individually)
Compatible Brands
GE, Hotpoint, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting — Laying The Washer On Its Side Makes Access Easier Disconnect power at the outlet before beginning. Wear work gloves. This repair typically requires tipping or laying the washer on its side to access the bottom of the machine, where the shift actuator is mounted. Lay the washer down carefully, protecting the floor and the washer's exterior. Locate the shifter connector and unplug it, then remove the two screws holding the actuator in place. Take out the old actuator. Install the new WH03X30517 in the same position, securing it with the two mounting screws, and reconnect the wire harness connector fully. Stand the washer back upright. Restore power and run a test cycle to confirm the washer switches correctly between agitation and spin, listening for a clicking sound as it changes modes. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My washer won't switch from wash to spin, but it will spin if I catch it there. Is this the part I need?
Yes, this is a well-documented symptom of a failing shift actuator. One customer described their machine not going to wash mode with no clicking sound heard when the mode should change, which is a classic sign this part has failed. They accessed the actuator by laying the machine on its side, then unplugged the shifter connector and removed two screws to complete the swap.
I replaced this part but my washer still won't switch from wash to spin. What's going on?
This is a fair question, and it's worth knowing that replacing this actuator doesn't always resolve every mode-switching problem on its own. One customer replaced the mode shifter, cleared all codes, and confirmed the washer agitated and spun fine individually, but it still wouldn't switch between the two modes — suggesting a different or additional component may have been involved in their specific case. If you're still having trouble after installing this part, further diagnosis of the transmission or related components may be needed.
Does this come with the clutch too?
No, this listing is for the shift actuator only, sold individually. A related shift clutch, WH05X24185, is a separate part — if your repair requires replacing both, you'll need to order the clutch separately.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the mounting, wiring, and switching function of the original WH03X30517 shift actuator used in compatible GE, Hotpoint, and Kenmore top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
3360629 Washer Transmission Gearcase
Description: The Transmission is an OEM part for Whirlpool washing machines. This integral component is at the heart of the washing machine's operation, translating the motor's power into action by driving the agitator and spinning the drum. Regular inspection and maintenance can prolong the life of the transmission, but if these symptoms occur, it may be time to replace this critical component.
Replaces Part Number: 3360629, W10140307, 285362, 62621, 8546456, W10172898, WP62621, WP8546456, 285194, 285291, 285312, 285392, 285515, 3349296, 3360263, 3360629R, 3360630, 388763, 389229, 389230, 389244, 389246, 3946631, 3947637, 3949609, 423, 62528, 62531, 62534, 62570, 62668, 62680, 63025, 63167, 63320, 63563, 63910, 63999, 8532118, 99890390, 99890391, AH341974, EA341974, AP3096209, PS341974, W10140301, W10140304, W10155438, W10251783, W10251785.
AJU75152606 Genuine OEM LG Washer Water Inlet Valve Assembly
The AJU75152606 is a genuine LG OEM water inlet valve assembly for LG top-load agitator washing machines. This assembly connects to the washer's hot and cold water supply and controls the flow of water into the tub during the fill portion of the wash and rinse cycles — electrical signals from the control system open and close the appropriate water passage, filling the tub to the correct level and shutting off once it's reached.
This electric-powered valve assembly is finished in gray, designed for freestanding installation, and rated for an 8 lb capacity washer. Common causes of failure include mineral buildup or debris restricting flow through the valve, or general electrical wear in the solenoid coils. Symptoms of a failing valve include the washer not filling with water, hose leaks at the connections, the valve not opening fully, or reduced flow rate from internal buildup. Replacing this assembly requires removing the control panel and main top of the washer — a moderate difficulty repair. It directly replaces AP7005965.
Quick Answer
The AJU75152606 Genuine OEM LG Washer Water Inlet Valve Assembly fixes LG top-load agitator washers that won't fill with water, are leaking at the hose connections, or have reduced flow from internal buildup. Gray, electric-powered, 8 lb capacity rating. Replaces AP7005965. Not the same as the similarly-numbered AJU75152602 valve, which is used on different LG WT7000-series models — confirm your exact part number before ordering.
Common Problems This Part Fixes
Washer not filling with water
Hose leaks at the valve connections
Valve not opening fully, restricting water flow
Reduced flow rate from mineral buildup or debris
Overflow or filling problems from inconsistent water pressure
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AJU75152606, ALG53799, AP7005965, EAP16547657, PD00074631, PS16547657
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve assembly is compatible with select LG top-load agitator washing machines, including model numbers such as WT7000CW, WT7005CW, WT6100CW, WT6105CM, WT6105CW, T14A4SEHTW, T1490SEHTW, T15A4SEHT2, T1590SEHTW, T15A4SEHTW, T14A4SEHTC, T1490SEHTC, and T14A4SEHBW.
Note — not the same as AJU75152602: A similarly-numbered valve, AJU75152602, is a separate part used on other LG WT7000-series models (WT7100CW, WT7150CW, WT7300CV, WT7300CW, WT7400CW, WT7400CV, WT7405CV, WT7405CW, WT7800CW, WT7800CV, WT7900HBA, WT7155CW). The two numbers are easy to confuse given how close they are — always confirm the exact part number from your appliance or parts diagram before ordering. Contact our support team with your model number if you're unsure which valve your washer needs.
Key Features
Genuine LG OEM part — factory-specified solenoid design and flow rate
Regulates hot and cold water flow into the tub during fill
Resolves "won't fill," "hose leaks," "valve not opening fully," and "reduced flow" symptoms caused by valve failure
Electric-powered, gray finish
Designed for freestanding installation
Rated for 8 lb capacity washers
Direct drop-in replacement — matches the original mounting and hose connections
Replaces AP7005965
Compatible with LG top-load agitator washing machines
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AJU75152606
Part Type
Washer Water Inlet Valve Assembly
Condition
Genuine OEM
Brand
LG
Application
Top-Load Agitator Washing Machines
Color
Gray
Power Type
Electric
Installation Type
Freestanding
Capacity Rating
8 lb
Repair Difficulty
Moderate — requires control panel and main top removal
Quantity
1 valve assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Remove the washer's control panel and main top to access the inlet valve — this is a moderate difficulty repair due to the disassembly involved. Photograph the wiring and hose connections before disconnecting anything. Disconnect the water hoses and wiring connectors from the old valve. Unscrew and remove the old inlet valve assembly. Position the new AJU75152606 in the same location and secure it with screws. Reconnect the water hoses and wiring connectors fully. Reassemble the main top and control panel. Restore the water supply and power, then run a test cycle to confirm the washer fills correctly with no leaking at the hose connections. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
My washer isn't filling with water. Is this the right part?
Yes, this is the most direct symptom of a failed water inlet valve. Since this valve is what admits water from your household supply into the washer, a solenoid failure, mineral buildup, or debris can prevent water from entering properly, stopping the wash cycle from proceeding.
Is this the same as AJU75152602?
No, these are two separate LG valve part numbers used on different washer model series, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close number match.
Is this a difficult repair?
It's a moderate difficulty repair, since it requires removing the washer's control panel and main top to access the valve. Basic hand tools are sufficient, but budget more time than you would for a simpler part swap.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water inlet valve originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC97-16350U Washer Suspension Rod Kit (Set of 4)
The XPARTCO DC97-16350U is an aftermarket replacement washer suspension rod kit (set of 4) compatible with a wide range of Samsung top-load washers in the WA40, WA41, WA42, WA44, WA45, WA49, and WA50 series. The suspension rods are spring-loaded shock-absorbing rods that connect the outer washer tub to the top corners of the cabinet frame, suspending the tub and dampening the vibrations generated during agitation and high-speed spin cycles. When one or more rods lose tension, break, or degrade, the tub swings off-center and strikes the cabinet walls — causing violent shaking, loud banging, error code dc (out of balance), UE imbalance errors, and progressive damage to the machine.
Each rod measures 26.4–26.5 inches in overall length and 1-1/4 inches in diameter, constructed from spring steel with plastic end caps. The kit includes all 4 suspension rods — always replace all four at the same time since they wear at the same rate. It directly replaces DC97-16350S, DC97-16350T, DC97-16350E, DC97-16350C, DC97-16350D, DC97-16350K, DC97-05280W, 4962798, AP6884450, EAP12720841, PS12720841, and PD00065434. Wear gloves during installation — the rods are coated with grease. Installs in 20–30 minutes — no special tools required.
Quick Answer
The XPARTCO DC97-16350U Washer Suspension Rod Kit fixes Samsung top-load washers that vibrate violently, bang loudly, walk across the floor, or display dc or UE imbalance error codes during spin. Set of 4 rods, 26.4–26.5" long, 1-1/4" diameter, spring steel with plastic end caps. Replace all 4 at the same time. Wear gloves — rods are greased. Compatible with Samsung WA40–WA50 series. Replaces DC97-16350S, DC97-16350T, DC97-16350E, DC97-16350C, DC97-16350D, AP6884450, PS12720841.
Common Problems This Kit Fixes
Washer vibrating violently or shaking excessively during the spin cycle
Loud banging or thumping — tub striking the cabinet walls during spin
Washer "walking" or moving across the floor during high-speed spin
Error code dc displayed — Samsung out-of-balance error during spin
Error code UE displayed — unbalanced load error the washer cannot self-correct
Washer repeatedly stopping and rebalancing the load without completing the spin cycle
Visible broken, detached, or sagging suspension rod inside the washer cabinet
Rattling or clunking during agitation — tub no longer centered
Replaces Part Numbers
This suspension rod kit directly replaces the following OEM and cross-reference part numbers:
DC97-16350U, DC97-16350S, DC97-16350T, DC97-16350E, DC97-16350C, DC97-16350D, DC97-16350J, DC97-16350K, DC97-16350U, DC97-16350E, DC97-16350S, DC97-16350C, DC97-16350D, DC97-16350T, AP6884450, ASM34747, EAP12720841, PD00065434, PS12720841.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This suspension rod kit is compatible with select top-load washers from the following Samsung series:
Samsung WA40 series — WA400PJHDWR, WA40J3000AW, WA40A3005AW, WA44A3205AW and related models
Samsung WA41 series — WA41A3000AW and related models
Samsung WA42 series — WA422PRHDWR and related models
Samsung WA45 series — WA45H7000AW, WA45H7200AW, WA45K7600AW, WA45M7050AW, WA45N3050AW, WA45T3200AW, WA45T3400AW, WA45T3400AP, WA456DRHDSU, WA456DRHDWR and related models
Samsung WA49 series — WA49B5105AW, WA49B5205AW and related models
Samsung WA50 series — WA50R5200AW, WA50R5400AV, WA50R5400AW, WA50T5300AC and related models
Kenmore / Sears top-load washers (select Samsung-built models)
Important: The DC97-16350U rod is 26.4–26.5 inches long and is for Samsung WA40–WA50 series washers. Larger-capacity WA48–WA54 series models use the longer DC97-16350V rod (27.5 inches). Always measure your existing rods or verify your model number before ordering — using the wrong length rod can cause the tub to sit at the incorrect height inside the cabinet.
Key Features
Set of 4 suspension rods — complete replacement covering all four tub mounting points
Suspends and centers the outer tub within the cabinet — dampens agitation and spin vibration to prevent tub-to-cabinet contact
Resolves Samsung error codes dc (out of balance) and UE (unbalanced load)
Rod length: 26.4–26.5 inches overall; diameter: 1-1/4 inches
Spring steel construction with plastic end caps — durable and corrosion resistant
Rods are pre-coated with grease — wear work gloves during installation
Replace all 4 rods at the same time — rods wear together and partial replacement results in uneven tub support
No special tools required — installs in 20–30 minutes
Replaces DC97-16350S, DC97-16350T, DC97-16350E, DC97-16350C, DC97-16350D, and over 15 additional cross-references
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DC97-16350U
Part Type
Washer Suspension Rod and Spring Assembly
Condition
Aftermarket Replacement
Application
Samsung Top-Load Washers — WA40, WA41, WA42, WA44, WA45, WA49, WA50 series
Quantity
Set of 4 (replace all four rods at the same time)
Rod Length
26.4–26.5 inches overall
Rod Diameter
1-1/4 inches
Material
Spring steel / Plastic end caps
Color
Brass / Black / White / Pink
Lubrication
Pre-coated with grease — wear gloves during installation
Error Codes Resolved
dc (out of balance), UE (unbalanced load)
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Gloves Disconnect power and turn off the water supply before beginning. Wear work gloves throughout — the suspension rods are coated with grease. Remove the lid and the top panel (typically secured by screws under the lid hinge covers and at the rear corners). With the top panel removed, the four suspension rods are visible at the corners, each running from a mounting point on the tub rim up to a hook or bracket at the top corners of the cabinet frame. Note the orientation and attachment method of each rod before removing. Unhook the top of each rod from the cabinet bracket and lift the bottom cup off the tub mounting pin. Install each new DC97-16350U rod by seating the bottom cup onto the tub mounting pin and hooking the top over the cabinet bracket. Replace all four rods before reassembling. Reinstall the top panel and lid, restore power and water, and run a spin cycle to verify smooth, quiet, centered operation. Tools needed: Phillips screwdriver; no special tools required for the rods themselves.
Frequently Asked Questions
What is the difference between DC97-16350U and DC97-16350V?
Both are Samsung top-load washer suspension rods, but they are different lengths for different washer capacity generations. The DC97-16350U is approximately 26.4–26.5 inches long and is used on mid-capacity Samsung WA40 through WA50 series washers. The DC97-16350V is approximately 27.5 inches long and is used on larger-capacity WA48 through WA54 series washers. Using the wrong length rod causes the tub to sit at the wrong height inside the cabinet, which can cause new imbalance issues. Always measure your existing rods or verify your model number before ordering.
Why must I replace all 4 rods instead of just the broken one?
All four suspension rods experience the same amount of wear over the same number of wash cycles. When one rod fails, the remaining three have experienced the same stress and fatigue and are likely to fail soon after. Replacing only the broken rod leaves three worn rods supporting the tub unevenly — this can cause continued vibration, accelerate wear on the new rod, and require a second repair shortly after. Replacing all four at the same time ensures even tub support, fully resolves the imbalance, and prevents a repeat repair.
Do DC97-16350S, DC97-16350T, and DC97-16350E all cross to the DC97-16350U?
Yes — DC97-16350S, DC97-16350T, DC97-16350E, DC97-16350C, and DC97-16350D are all cross-reference part numbers for the same Samsung suspension rod assembly used across different production runs of the same washer series. Samsung updates part number suffixes during production revisions. All of these numbers have the same 26.4–26.5" length and are interchangeable with the DC97-16350U.
What do error codes dc and UE mean on Samsung washers?
Error code dc on Samsung top-load washers indicates the machine has detected an out-of-balance condition and stopped spinning to prevent damage. Error code UE indicates an unbalanced load that the washer cannot self-correct by redistributing. Both codes can be caused by an overloaded or unevenly distributed laundry load — but if the errors occur consistently even with normal, balanced loads, worn or broken suspension rods are the most common mechanical cause. Replacing the rod kit resolves these errors in most cases.
Is this an OEM or aftermarket part?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured from spring steel with plastic end caps to match the length and spring tension of the original DC97-16350U suspension rods.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WP389140 Genuine OEM Whirlpool Washer Drive Block
The WP389140 is a genuine Whirlpool OEM drive block for large-capacity belt-drive and direct-drive top-load washers. This is a purely mechanical coupling component: it connects the inner spin basket to the transmission's drive shaft, so that when the transmission turns, the basket turns with it. Without a properly seated drive block, the connection between the motor's rotational power and the basket is lost or unreliable, even though every electrical component in the washer may be working perfectly.
Measuring approximately 2-5/16" high, this drive block is a wear component subject to gradual mechanical stress every time the washer agitates or spins. A worn or failed drive block produces a distinctive set of symptoms: the basket may spin freely without properly engaging, the washer may spin slowly and leave clothes excessively wet, or you may hear a loud knocking or banging noise during operation as the connection between the basket and drive shaft becomes loose or worn. It directly replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858.
Quick Answer
The WP389140 Genuine OEM Whirlpool Washer Drive Block fixes Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis top-load washers with a basket that spins freely without engaging, slow spinning that leaves clothes excessively wet, or loud knocking/banging noise during operation. Approximately 2-5/16" high. For large-capacity belt-drive and direct-drive washers. Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, 2858. This repair typically requires a spanner wrench to remove a large securing nut — budget for the right tool before starting.
Common Problems This Part Fixes
Washer basket spins freely without properly engaging during the wash or spin cycle
Washer spins slowly, leaving clothes excessively wet at the end of a cycle
Loud knocking or banging noise during operation
Washer shakes or moves noticeably during spin
Basket continues spinning after the cycle should have stopped
Inefficient wash and spin cycles overall due to poor basket engagement
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive block directly replaces the following OEM and cross-reference part numbers:
WP389140, 389140, 357782, 97360, PD00002363, EAP11741977, WP389140VP, AP6008836, AWP47839, J27-936, PS11741977.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive block is compatible with select Whirlpool large-capacity top-load washers (belt-drive and direct-drive), and also fits select Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers built on the Whirlpool platform, including model numbers such as:
NTW4516FW, NTW4516FW3, NTW4516FW4
WTW4816FW2, WTW4816FW3
RTW4516FW, NTW4605EW, WTW4800BQ
Note: Always verify your full model number before ordering, since Whirlpool uses different drive block designs across its washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified fit for a secure basket-to-transmission connection
Connects the inner spin basket to the transmission's drive shaft
Resolves "basket spins freely," "slow spin, clothes too wet," and "loud knocking noise" symptoms caused by drive block wear
Approximately 2-5/16" high
Designed for large-capacity belt-drive and direct-drive washer platforms
Direct drop-in replacement matching the original fit onto the spin tube notches
Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP389140
Part Type
Washer Drive Block
Condition
Genuine OEM
Brand
Whirlpool
Application
Large-Capacity Belt-Drive and Direct-Drive Top-Load Washers
Height
Approx. 2-5/16 in.
Function
Connects the inner spin basket to the transmission drive shaft
Related Component
Drive cam (commonly inspected/replaced during the same repair)
Repair Difficulty
Moderate — spanner wrench and washer disassembly required
Quantity
1 drive block
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, Inglis
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Spanner Wrench Required Disconnect power at the outlet or shut off the circuit breaker, and shut off the hot and cold water supply valves before beginning. Wear work gloves. Remove the washer's top and control console per your model's service instructions to access the inner tub assembly. Remove the agitator and any hardware securing the basket, which typically includes a large center nut — a spanner wrench is required to remove this nut, along with a socket and long extension for other fasteners; expect to remove a fair number of components to fully access the drive block. Lift the wash basket out to expose the drive block, which sits on the spin tube near the center of the transmission. Photograph the orientation of the old drive block and any surrounding hardware before removing it. Lift the old drive block free, and while it's accessible, inspect the drive cam nearby for wear as well, since it's commonly replaced at the same time. Slide the new WP389140 drive block into position, making sure it seats fully onto the spin tube notches, and reassemble the basket, hardware, agitator, console, and top panel in reverse order. Restore water and power, then run a test cycle through both wash and spin to confirm the basket engages properly with no unusual noise. Tools needed: multi-screwdriver, spanner wrench, socket set with long extension, work gloves.
Frequently Asked Questions
My washer basket spins freely and doesn't seem connected to anything. Is this the drive block?
Yes, this is the classic symptom of a failed drive block. Since this component is the mechanical link between the transmission's drive shaft and the inner spin basket, once it wears out or fails, the basket can spin independently without properly engaging, even though the motor and transmission are working normally.
Do I really need a spanner wrench for this repair?
Yes, on most models. Accessing the drive block requires removing a large nut that secures the basket assembly, and this nut is specifically designed to be removed with a spanner wrench rather than a standard socket. Trying to remove it without the correct tool risks damaging the nut or the surrounding components, so it's worth having one on hand before you start.
Should I replace the drive cam at the same time?
It's worth inspecting while you have the assembly open, since the drive cam sits in the same area and is commonly replaced alongside the drive block when a technician is already this far into the repair. If it shows visible wear, replacing both at once saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original dimensions and fit of the drive block originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH01X27538 Washer Drive Belt
The Genuine OEM GE WH01X27538 is a washer drive belt for GE and Hotpoint top-load washers. It is a 5-rib belt with 4 grooves, approximately 22.87 inches long. The belt connects the drive motor to the transmission pulley, so the motor can spin the basket and agitate the clothes. A worn, stretched, or broken belt can cause a washer that won't spin or agitate, a slow spin, squealing, or noise during the cycle.
This is the original GE part. Belts differ between washer families, so check the part number against your model before ordering.
Quick Answer
The Genuine OEM WH01X27538 Drive Belt fixes a GE or Hotpoint top-load washer that won't spin or agitate, spins slowly, or squeals or makes noise because the drive belt is worn or broken. Classic symptom: the motor runs, but the basket or agitator doesn't turn.
Common Problems This Part Fixes
Motor runs but the basket or agitator doesn't turn
Washer won't spin or agitate
Slow spin or poor wash performance
Squealing or noise during the cycle
Visibly worn, cracked, stretched, or broken belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drive belt directly replaces the following part number:
WH01X27538, replaces 290D1101P005, 4587903, 5PJ 586 SJ 161, AGE25699, AP6328256, OEM18984777, PD00043350, PS12299369
Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This drive belt is listed for GE and Hotpoint top-load washers, including these examples:
GE GTW220ACK4WW, GTW220ACK5WW, GTW330ASK4WW, GTW335ASN1WW
GE GTW460ASJ8WW, GTW460ASJ9WW, GTW460ASJAWW
Hotpoint HTW200ASK3WW, HTW240ASK5WS, HTW240ASK6WS
Note: The models above are a small sample, not a full list. Washer belts differ between families, so compare your old belt to this one (approximately 22.87 inches, 5 ribs) and check your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE drive belt for GE and Hotpoint top-load washers
5-rib, 4-groove design, approximately 22.87 inches long
Connects the drive motor to the transmission pulley
Resolves no-spin, no-agitate, and noise problems caused by a worn belt
Typically a 30 minute to 1 hour repair
Product Specifications
Part Number
WH01X27538
OEM Part Number
WH01X27538
Part Type
Washer Drive Belt
Condition
Genuine OEM
Belt Length
Approx. 22.87 Inches
Belt Profile
5-Rib, 4-Groove
Application
GE & Hotpoint Top-Load Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before beginning, and wear work gloves to protect your hands. Access to the belt depends on your model, so follow its service guide to reach the motor and pulleys. Note how the old belt is routed, remove it, and fit the new belt on the same pulleys. Check that it is seated in the pulley grooves before reassembling.
Frequently Asked Questions
My washer motor runs but the basket won't turn. Is this the part I need?
A broken or slipping drive belt is a common cause. If the belt looks worn, cracked, or loose, replacing it is a good first step.
How long is this belt?
It is approximately 22.87 inches long, with 5 ribs and 4 grooves. If your old belt is a very different length or has a different number of ribs, check your model number before ordering.
Is this a top-load or front-load part?
It is listed for GE and Hotpoint top-load washers. If you are unsure which belt your washer uses, check your model number or contact our support team.
Is this an easy repair?
Retailers list it at roughly 30 minutes to 1 hour, though it depends on your model. Follow your model's service guide to reach the motor and pulleys.
Will this fit my washer?
It is listed for many GE and Hotpoint washers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10528947 Washer Drive Hub Kit
The XPARTCO W10528947 is an aftermarket replacement washer basket drive hub kit compatible with select top-load washing machines from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. The drive hub is a critical transmission component that connects the spin basket to the spin shaft, transferring power from the motor to rotate the wash basket and agitate laundry during each cycle.
This kit includes one basket drive hub and one drive block retainer — everything needed to restore proper spinning and agitation function. Common causes of drive hub failure include normal wear over time, strain from heavy or unbalanced loads, and physical damage from impact. A worn or cracked hub typically results in the basket slipping, failing to spin, or producing loud clicking and grinding noises during operation.
Quick Answer
The XPARTCO W10528947 Washer Drive Hub Kit fixes washers that won't spin, spin weakly, make clicking or grinding noises, or leave clothes too wet after the cycle. It connects the spin basket to the spin shaft and is compatible with select Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis top-load washers.
Common Problems This Part Fixes
Washer not spinning or agitating at all
Weak or slow spin — clothes coming out too wet
Clicking, grinding, or loud noises during spin cycle
Basket slipping under load
Washer pumping but not spinning
Excessive shaking or movement during operation
Replaces Part Numbers
This kit directly replaces the following OEM and cross-reference part numbers:
W10528947, 2684908, W10396887, W10528947VP, W11771931, EAP6012095, AWP40580, PD00024946, AP5665171, PS6012095.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive hub kit is compatible with select top-load washers from the following brands:
Whirlpool top-load washers
Maytag top-load washers (including Bravos series)
Kenmore top-load washers (select models)
Amana top-load washers
Admiral top-load washers
Crosley top-load washers
Inglis top-load washers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Connects the spin basket to the spin shaft — restoring proper agitation and spin performance
Aftermarket replacement built to OEM-equivalent quality standards
Kit includes one basket drive hub and one drive block retainer for a complete repair
Made from durable plastic construction designed to withstand regular wash cycle stress
DIY-friendly repair — installs with basic hand tools in 30–60 minutes
Budget-friendly alternative to OEM at a lower cost without sacrificing performance
Product Specifications
Part Number
W10528947
Part Type
Washer Basket Drive Hub Kit
Condition
Aftermarket Replacement
Application
Top-Load Washing Machine
Material
Durable Plastic (ABS)
Hub Dimensions
3-5/8" Diameter x 13/16" H
Retainer Clip Length
2-7/8"
Kit Includes
1 Basket Drive Hub + 1 Drive Block Retainer
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, Inglis
Installation Notes
⚠️ Safety First — Disconnect Power and Water Before Starting Unplug the washer from the power source and shut off the hot and cold water supply valves before beginning any repair. Remove the agitator or impeller (depending on your model) to access the drive hub. Unscrew the old hub and retainer, install the new drive hub kit in the same position, and reassemble the washer. Tools needed: multi-bit screwdriver, 7/16-inch socket with extension, and a nut driver. Allow 30–60 minutes for a complete repair. Consult your washer's service manual for model-specific instructions.
Frequently Asked Questions
Will the W10528947 fit my washer?
This kit is compatible with select top-load washers from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. Always verify your washer's model number before ordering. Contact our support team if you need help confirming compatibility.
What does the drive hub do?
The drive hub connects the spin basket to the spin shaft beneath the agitator. It transfers power from the motor to rotate the wash basket during the spin and agitation cycles. When the hub wears out or cracks, the basket can slip or stop spinning entirely.
What are the signs that my drive hub needs replacement?
Common signs include: the washer won't spin or agitate, the spin cycle is weak or slow, clothes come out too wet, or you hear clicking and grinding noises during operation. Excessive shaking or movement during the cycle can also indicate a worn hub.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is designed to deliver reliable, long-lasting performance at a more affordable price point.
What is included in the kit?
The kit includes one basket drive hub and one drive block retainer — the two components needed for a complete drive hub replacement.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. Our team is available to help you verify compatibility before you buy.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
W11457841 Genuine OEM Whirlpool Washer Lid Strike
The W11457841 is a Genuine OEM Whirlpool replacement washer lid strike compatible with select Whirlpool, Maytag, and Kenmore HE top-load washers — including the Whirlpool WTW5100, WTW5105, WTW6120, WTW7120, WTW8120, WTW8127 series, and the Maytag MVW6200, MVW6230, MVW7230, MVW7232, MVW8230 series. The lid strike is the plastic component attached to the underside of the washer lid that physically engages the lid lock mechanism when the lid is closed. As the lid lowers into place, the strike enters the lock slot and activates the lid switch — signaling the control board that the lid is securely closed and the washer is safe to start agitation and spin.
When the lid strike fails — typically by breaking off, cracking, or wearing down — the lid lock can't be properly activated, and the washer will not start, will stop mid-cycle, or will refuse to advance to the spin cycle. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the W11457841 is the current production part, directly superseding W11091027. It also replaces 4959179, AP6987306, EAP16218028, PD00061788, and PS16218028. Installation is fast and simple — a counterclockwise twist removes the old strike, and a clockwise twist installs the new one. Installs in under 5 minutes, no special tools required.
Quick Answer
The W11457841 Genuine OEM Whirlpool Washer Lid Strike fixes Whirlpool, Maytag, and Kenmore HE top-load washers that won't start, won't lock the lid, stop mid-cycle, or won't advance to spin because the lid strike is broken or worn. Plastic strike that attaches to the underside of the washer lid and activates the lid lock and switch. Twist-in installation. Genuine OEM. Replaces W11091027, 4959179, AP6987306, EAP16218028, PD00061788, PS16218028. Compatible with Whirlpool WTW5100/5105/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series.
Common Problems This Part Fixes
Washer not starting — lid strike not engaging the lid lock
Lid won't lock at the start of the cycle
Washer stops mid-cycle with a lid-related fault
Washer fills with water but won't agitate or advance to spin
Lid strike visibly broken, cracked, or missing on the underside of the lid
Strike worn down — physically fits the lock slot but no longer activates the lid switch
Repeated lid lock errors despite the lid appearing to close normally
Replaces Part Numbers
This washer lid strike directly replaces the following OEM and cross-reference part numbers:
W11457841, W11091027, AP6987306, AWP44638, PD00061788, EAP16218028, PS16218028.
W11457841 is the current production part superseding W11091027. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This lid strike is compatible with select HE top-load washers from the following brands and series:
Whirlpool top-load washers — WTW5100HC0, WTW5100HC1, WTW5100HC2, WTW5100HW0, WTW5100HW1, WTW5100HW2 series
Whirlpool top-load washers — WTW5105HC0, WTW5105HC1, WTW5105HC2, WTW5105HW0, WTW5105HW1, WTW5105HW2 series
Whirlpool top-load washers — WTW6120HC0, WTW6120HC1, WTW6120HC2, WTW6120HW0, WTW6120HW1, WTW6120HW2 series
Whirlpool top-load washers — WTW7120HC0, WTW7120HW0 series
Whirlpool top-load washers — WTW8120HC0, WTW8120HW0 series
Whirlpool top-load washers — WTW8127LC0, WTW8127LC1, WTW8127LW0 series
Maytag top-load washers — MVW6200KW0, MVW6200KW1, MVW6200KW2, MVW6200KW3 series
Maytag top-load washers — MVW6230HC0, MVW6230HC1, MVW6230HC2, MVW6230HW0, MVW6230HW1, MVW6230HW2 series
Maytag top-load washers — MVW6230RHW0, MVW6230RHW1, MVW6230RHW2 series
Maytag top-load washers — MVW7230HC0, MVW7230HW0, MVW7230HW1 series
Maytag top-load washers — MVW7232HC0, MVW7232HW0, MVW7232HW2 series
Maytag top-load washers — MVW8230HC0 series
Kenmore / Sears top-load washers (Whirlpool-built — select 110-series models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Plastic strike attaches to the underside of the washer lid and engages the lid lock mechanism when the lid closes
Activates the lid switch to signal the control board that the lid is securely closed and the washer is safe to start
Twist-in/twist-out installation — no tools or hardware required; counterclockwise to remove, clockwise to install
Current production part — directly supersedes W11091027
Replaces W11091027, 4959179, AP6987306, EAP16218028, PD00061788, and PS16218028
Compatible with Whirlpool WTW5100/5105/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series HE top-load washers, plus select Kenmore Whirlpool-built models
Fast DIY repair — installs in under 5 minutes
Product Specifications
Part Number
W11457841
Supersedes
W11091027
Part Type
Washer Lid Strike
Condition
Genuine OEM
Application
HE Top-Load Washers (Whirlpool/Maytag/Kenmore platform)
Material
High-strength plastic
Installation
Twist-in (clockwise) / twist-out (counterclockwise) — no tools required
Mounting Location
Underside of washer lid
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting — Wear Work Gloves Disconnect power before beginning. Wear work gloves to protect your hands. Open the washer lid and locate the lid strike on the underside of the lid — it's the small plastic peg that drops into the lock slot when the lid is closed. To remove the old strike: rotate the strike counterclockwise until the retaining tab breaks free and pulls back, then pull the old strike straight out. To install the new W11457841: align it with the mounting hole in the same orientation as the old one, and rotate clockwise until you hear or feel the retainer tab click into place. Close the lid and confirm the strike engages the lock slot properly. Restore power, start a test cycle, and confirm the lid locks and the washer begins normal operation. Tools needed: work gloves only — no tools required for the strike itself.
Frequently Asked Questions
What's the difference between the lid strike, lid lock, and lid switch?
These three components work together as a safety system. The lid strike (W11457841) is the small plastic peg attached to the underside of the lid that physically enters the lock slot when the lid closes. The lid lock is the mechanism in the washer cabinet that grips the strike and physically locks the lid closed during the spin cycle. The lid switch is the electrical sensor inside the lock assembly that signals the control board when the strike is engaged. If the strike is broken or missing, none of the three can do their job — even if the lock and switch are working perfectly. Replacing just the strike often resolves "won't start" issues without needing to replace the more expensive lock assembly.
What is the difference between W11457841 and W11091027?
These are the same lid strike across production revisions. W11091027 was the earlier OEM part number, and W11457841 is the current production version that Whirlpool issued as a direct replacement. Both parts are physically and functionally identical — if your washer's parts diagram shows W11091027, the W11457841 is the correct current replacement, and this listing covers both numbers.
My washer won't start and the lid seems to close normally — could this be the strike?
Yes, this is one of the most common symptoms of lid strike failure on compatible Whirlpool and Maytag washers. Even though the lid appears to close, if the strike has cracked or worn down it may not physically engage the lock or activate the switch correctly. Visually inspect the strike on the underside of the lid — if it's broken, missing, or chipped, replacement is straightforward. If the strike looks intact and the washer still won't start, the lid lock assembly itself or the wiring harness may need attention.
Do I really not need any tools to install this?
Correct — the W11457841 lid strike uses a twist-in design with no screws or hardware. To remove the old strike, rotate it counterclockwise until the internal retaining tab breaks free, then pull it out. To install the new one, push it into the mounting hole and twist clockwise until it clicks into place. The whole replacement typically takes under 5 minutes once you have the new part in hand. Work gloves are recommended to protect your hands while gripping the small plastic part, but no other tools are needed.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same lid strike installed in compatible Whirlpool, Maytag, and Kenmore HE top-load washers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
W10775188 Washer Genuine OEM Washplate
Replaces Part Numbers: W10775188, 4282681, W10698538, W10834891, AP5959417, PS11699797.
W10775188 Washer Washplate – Genuine OEM Part
Restore optimal cleaning power with the W10775188 Washer Washplate. This Genuine OEM part replaces a worn or damaged washplate to ensure efficient agitation and even cleaning performance.
Key Features:
✅ Genuine OEM Part – built to factory specs
🔁 Replaces: 4282681, W10698538, W10834891, AP5959417, PS11699797
🌀 Provides powerful agitation for deep cleaning
🛠️ Fits select Whirlpool, Maytag, and Amana top-load washers
🧰 Easy to install – includes center bolt
⚠️ Always unplug your washer before servicing. Need help with compatibility? Contact us!
📦 Part Number: W10775188
