EAU63923602 Refrigerator Genuine OEM Condenser Fan Motor – Compatible with LG & Kenmore Refrigerators
Product Description
Restore proper airflow and efficient cooling with the EAU63923602 Refrigerator Genuine OEM Condenser Fan Motor. This factory-approved motor circulates air across the condenser coils to help dissipate heat from the refrigeration system. A failed condenser fan motor can cause the refrigerator to run warm, overheat, make loud noises, or stop cooling efficiently. Installing this Genuine OEM condenser fan motor ensures exact fit, quiet operation, and long-lasting performance.
Replaces Part Numbers
EAU63923602, ODM-001F-4B, PD00057884, EAP12383670, AP6317196, 4877338, PS12383670.
Compatibility
This Genuine OEM condenser fan motor fits select LG and Kenmore (LG-manufactured) refrigerators.
Example compatible models include (but are not limited to):LG LFXS24623S, LFXC24726SKenmore 795.71033.010, 795.74023.411
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for exact fit and reliability
🌬️ Restores Proper Airflow – Cools condenser coils for efficient operation
🔇 Quiet Performance – Smooth motor design reduces noise and vibration
💪 OEM-Grade Durability – Built for continuous operation in warm environments
🛡️ Fixes Common Issues – Solves warm temperatures, overheating, or loud fan noise
📐 Product Specification
Part Number: EAU63923602
Component Type: Refrigerator Condenser Fan Motor
Voltage: 120V AC
Mounting: Rear lower condenser fan assembly
Rotation: OEM-matched direction
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the refrigerator before servicing. Condenser components may be hot—allow time to cool.
Steps:
Disconnect power and remove the rear lower access panel.
Locate the condenser fan motor assembly.
Disconnect the wiring harness and remove mounting screws.
Install the new EAU63923602 motor in the same position.
Reconnect wiring, reinstall the panel, and restore power.
Confirm proper fan operation and airflow.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Restore efficient refrigerator cooling with confidence — Add to Cart Now for a factory-quality repair!
EAU63923601 Refrigerator Condenser Fan Motor - Compatible with LG, Haier, Kenmore/Sears Refrigerators
Product Description
Keep your refrigerator cool and efficient with the replacement EAU63923601 Refrigerator Condenser Fan Motor from Parts-O-Matic. This high-quality motor, designed for LG, Haier, and Kenmore/Sears refrigerators, circulates air across the condenser coil to dissipate heat, ensuring optimal cooling performance. Made with durable ABS plastic and metal components (DC 12V, 1A, 4-wire 4-pin), this motor addresses issues like overheating, noisy operation, poor cooling, or fan failure.
Note: Includes one condenser fan motor. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement.
Replaces part numbers: EAU63923601, ODM-001F-4A, LFXS26596S, 4877337, AP6317195, PS12383669, EAP12383669, PD00046601, EAU63923604
Compatibility:
Compatible with models including but not limited to:
LG: LFXS28968S, LFXS28968S/00, LMXS28626S, LMXS28626S/00, LFXS26596S, LRMDS3006S, LMWS27626S, LRFVS3006D
Haier: Select models requiring EAU63923601 or compatible condenser fan motors
Kenmore/Sears: Select models requiring EAU63923601 or compatible condenser fan motors
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Haier, and Kenmore/Sears refrigerator models.
🔥 Specifications: replacement condenser fan motor, DC 12V, 1A, 4-wire 4-pin connector, shaft length 46mm, shaft diameter 3mm, line length 72cm (28.34in), ABS plastic/metal construction, 3.15" x 3.15" x 2.76", 5.29 oz.
💰 Cost-Effective Alternative: replacement motor offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, work gloves; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves issues like refrigerator overheating, excessive noise, poor cooling, or fan failure.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Restore your refrigerator’s cooling efficiency today!
Add to cart now for a budget-friendly fix!
EAU63923602 Refrigerator Condenser Fan Motor - Compatible with LG, Kenmore Refrigerators
Product Description
Restore your refrigerator’s cooling performance with the EAU63923602 Condenser Fan Motor. This replacement motor powers the condenser fan to dissipate heat from the coils, ensuring efficient cooling. Designed for select Kenmore, LG refrigerators, it fixes issues like poor cooling, freezer too warm, compressor overheating, or loud noises. Note: Includes one condenser fan motor. Take photos of wiring during disassembly and clean condenser coils before installation.
Replaces part numbers: EAU63923602, ODM-001F-4B, PD00057884, EAP12383670, AP6317196, 4877338, PS12383670.
Key Features:
✅ Brand Compatibility: Fits select LG, Kenmore refrigerator models.
❄️ Specifications: Condenser fan motor, 12V DC, 1A.
💰 Cost-Effective: OEM performance at a competitive price.
🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 20–40 minutes.
🛡️ Reliable Fixes: Resolves poor cooling, freezer too warm, compressor overheating, or noisy operation.
Installation Notes:
Safety First: Unplug the refrigerator before installation to avoid electrical shock.
Clean condenser coils to ensure optimal performance.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your refrigerator running efficiently today!
Add to cart now for a budget-friendly fix!
XPARTCO 4681JB1029B Refrigerator Condenser Fan Motor
13Vdc, 1.55W, 120mA, CCW.
Fits specific LG refrigerator models.
Replaces Part Numbers: 4681JB1029B, 4681JB1017B, 4681JB1017E, 4681JB1027B, AP4437343, OEM17749374, PS3523329.
Description: This Condenser Fan Motor is a replacement part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W10124096 Refrigerator Condenser Fan Motor
The XPARTCO W10124096 is an aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators, including Kenmore, Maytag, KitchenAid, Amana, and Jenn-Air models. The condenser fan motor pulls air across the condenser coils to carry heat away from the refrigerant. When the motor wears out or fails, the refrigerator may run warmer than normal, cool poorly, or make unusual noise.
The kit includes the fan motor, a fan blade, and a jumper wire harness for installations where the original motor used a 3-pin connector. It replaces many earlier Whirlpool motor numbers, so the new kit may look different from your original motor. This is the condenser fan, near the compressor, not the evaporator fan inside the freezer or fresh food compartment.
Quick Answer
The XPARTCO W10124096 Condenser Fan Motor Kit fixes a Whirlpool-built refrigerator that runs warm, cools poorly, or makes noise because the condenser fan motor has failed. Kit includes the motor, fan blade, and jumper harness. Classic symptom: the compressor area is noisy, or the condenser fan doesn't spin while the compressor runs.
Common Problems This Part Fixes
Refrigerator running warmer than usual or cooling poorly
Noisy refrigerator near the compressor
Condenser fan not running
Worn or damaged condenser fan motor or blade
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This condenser fan motor kit directly replaces the following part numbers:
W10124096, 1378525, 2188538, 2188727, 2188728, 2188729, 2188732, 2188891, 2206005, 2315538, 2315558, W10124096VP, W10130108, W10204250, W10509333, W10861645, AH1957416, AP4318657, AWP40429, EA1957416, EAP1957416, PD00002509, PS1957416
These numbers span several generations of Whirlpool's own part numbering for this motor. Confirm against your refrigerator's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This condenser fan motor kit is listed for Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, and Jenn-Air refrigerators, including these examples:
Models ED5FHAXSB03, 8ET1FTKXKT05, GI15NDXTB0, 7GD27DIXHB00
Models 10644022600, 10653254200, BRS62ABANA00, MSD2658KES02
Note: The models above are a small sample of a list of hundreds, not a full list. Some retailer lists include drawer and bin models, so verify fit with your full model number. Contact our support team to confirm fit before ordering.
Key Features
Aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators
Kit includes the fan motor, fan blade, and a jumper wire harness for 3-pin connectors
Moves air across the condenser coils to help the refrigerator cool
Resolves warm-running and noise problems caused by a failed motor
Replaces 13 earlier Whirlpool part numbers
Product Specifications
Part Number
XPW10124096
OEM Part Number
W10124096
Part Type
Refrigerator Condenser Fan Motor Kit
Condition
Aftermarket Replacement
Kit Includes
Fan Motor, Fan Blade, Jumper Wire Harness
Application
Whirlpool, Kenmore, Maytag, KitchenAid, Amana & Jenn-Air Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator before beginning, and move perishable food to a cooler or another refrigerator. Wear work gloves. Follow your model's service guide to reach the condenser fan, which is near the compressor. Note how the wiring is connected, disconnect it, and remove the old motor and blade. Fit the new motor and blade in the same position and reconnect the wiring. Use the supplied jumper harness only if your original motor used a 3-pin connector. Restore power and check that the fan runs.
Frequently Asked Questions
My refrigerator is running warm. Is this the part I need?
A failed condenser fan motor is one possible cause, since the condenser can't shed heat without airflow. Check that the condenser coils are clean and that the fan turns freely. If the fan doesn't run or the motor is noisy or worn, this kit is the repair.
Is this the condenser fan or the evaporator fan?
This is the condenser fan motor, which cools the condenser coils near the compressor. The evaporator fan is a different part located inside the cabinet. Check your parts diagram if you are unsure.
When do I use the jumper wire harness?
The kit includes a jumper harness for installations where the original motor used a 3-pin connector. If your original connector is different, compare it to the new motor, or contact our support team.
Will this fit my refrigerator?
It is listed for hundreds of Whirlpool-built refrigerators, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WR60X46085 Refrigerator Condenser Motor Fan Blade
The WR60X46085 is a genuine OEM condenser Motor fan blade assembly for GE, Hotpoint, and RCA refrigerators. The blade presses onto the condenser fan motor shaft and pulls air across the condenser coil and compressor, carrying heat away so the sealed system can cool properly. When a blade cracks, loses a vane, or works loose on the shaft, the fan becomes noisy or unbalanced, or stops moving air, and the compressor and condenser start running hot.
This is a genuine OEM part from GE Appliances, not an aftermarket equivalent, so the blade matches the original factory fit and balance. Note that this is the blade only. The condenser fan motor is a separate part, so if the motor itself has failed, the blade alone will not fix the problem.
Quick Answer
The Genuine OEM WR60X46085 Condenser Motor Fan Blade fixes a GE, Hotpoint, or RCA refrigerator with a noisy, rattling, or vibrating condenser fan, or a fan that spins without moving air because the blade is cracked, damaged, or loose. Genuine OEM, replaces the earlier WR60X10207 and WR60X10088 blades. Classic symptom: rattling or buzzing from the bottom rear of the refrigerator, or a warm cabinet with a compressor that runs constantly.
Common Problems This Part Fixes
Rattling, buzzing, or vibrating noise from the condenser fan area
Visibly cracked, chipped, or broken blade vanes
Blade loose on the motor shaft or spinning without moving air
Compressor running constantly or running hot from poor condenser airflow
Refrigerator not cooling well because heat isn't being removed from the condenser coil
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This condenser fan blade replaces the following part numbers:
WR60X46085, WR60X10207, WR60X10088, AGE1580527, AP8075891, EAP1022410, PD00097217, PS1022410
GE has superseded WR60X10088 with WR60X10207, and WR60X10207 with the current WR60X46085. If your parts diagram or old blade shows either earlier number, the WR60X46085 is the current genuine replacement.
Compatibility
This blade is listed for refrigerators from the following brands:
GE refrigerators
Hotpoint refrigerators
RCA refrigerators
Note: A full model list isn't shown here, so confirm fit by matching the number on your old blade or your refrigerator's parts diagram against the Replaces list above, or contact our support team with your model number and we'll verify before you order. This is the blade only. The condenser fan motor is sold separately.
Key Features
Genuine OEM GE condenser Motor fan blade assembly, not an aftermarket equivalent
Current part number, superseding WR60X10207 and WR60X10088
Restores quiet, balanced airflow across the condenser coil
Authorized by GE for refrigerator models using flammable refrigerant such as R600a
Blade only. Motor not included
Simple replacement, typically 15–30 minutes
Product Specifications
Part Number
WR60X46085
OEM Part Number
WR60X46085
Part Type
Refrigerator Condenser Motor Fan Blade
Condition
Genuine OEM
Manufacturer
GE Appliances
Supersedes
WR60X10207, WR60X10088
Included
Condenser Fan Blade Only
Application
GE, Hotpoint & RCA Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator before starting. Pull the unit out and remove the rear or lower access panel to reach the condenser fan, which sits near the compressor. Pull the old blade off the motor shaft, noting how far it sits on the shaft and which way it faces. Press the new blade on to the same position, making sure it spins freely without touching the shroud or motor. While the panel is off, vacuum dust from the condenser coil and fan area, since buildup is a common cause of overheating. Replace the panel, push the refrigerator back, and restore power.
Frequently Asked Questions
My refrigerator is making a rattling noise at the back — is this the part I need?
It could be. A cracked, chipped, or loose condenser fan blade is a common source of rattling or vibration near the compressor. Inspect the blade for damage and check that it spins freely. If the blade looks fine but the fan won't turn, the condenser fan motor may be the problem instead.
Does this include the motor?
No. This is the fan blade only. The condenser fan motor is a separate part.
My old blade is a WR60X10207 or WR60X10088. Will this work?
Yes. WR60X46085 is the current GE part number that supersedes both earlier numbers.
Is this a genuine GE part?
Yes. This is a genuine OEM part from GE Appliances, not an aftermarket equivalent.
Will this fit my refrigerator?
It is listed for GE, Hotpoint, and RCA refrigerators. Match the number on your old blade or parts diagram against the Replaces list, or contact our support team with your model number and we'll confirm fit before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR60X26866 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X26866 is an aftermarket replacement axial evaporator fan motor for the fresh food section of select GE French door refrigerators, including the CFE28, CFE29, CWE23, CYE22, CYE23, DFE28, DFE29, GFD28, GFE26, GFE27, GFE28, GFE29, GFS26, GFS28, GNE26, GNE29, GYE22, GYS22, PFD28, PFE28, PFE29, PWE23, PYD22, PYE22, PYE23, and ZWE23 series. The evaporator fan motor pulls air through the evaporator coils to remove heat from the circulating air inside the refrigerator. Without a functioning evaporator fan, the refrigerator compartment cannot maintain its target temperature even when the compressor and condenser are running normally — the cold air generated at the evaporator simply isn't being circulated to the food storage areas.
The WR60X26866 is a DC motor rated at 13.6V DC, 0.16A, with a fan housing measuring 3-4/7"L x 2"W x 3-1/8"H, plus a multi-color wire harness and plug approximately 11-1/2" long. It includes the axial fan blade and harness as a complete assembly. It directly replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, and PS12172983. Important: if your refrigerator was built between May 2014 and March 2015 with serial range FF–HD, the unit's software must be updated before installing this fan motor — see FAQ below. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO WR60X26866 Refrigerator Evaporator Fan Motor fixes GE French door refrigerators where the fridge isn't cooling but the freezer is cold, the evaporator coils are frosted over, the ice maker isn't working due to insufficient cooling, or there's loud humming or grinding from the freezer area. Axial fan motor, 13.6V DC, 0.16A. Fan housing: 3-4/7"L x 2"W x 3-1/8"H; harness ~11-1/2"L. Replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, PS12172983. Note: May 2014 – Mar 2015 build refrigerators (serial range FF–HD) require a software update before installation.
Common Problems This Part Fixes
Refrigerator not cooling properly while the freezer remains cold — classic evaporator fan failure
Freezer cold but fridge warm — fresh food compartment air not being circulated
Frosty or frozen evaporator coils due to insufficient air circulation
Ice maker failure caused by inadequate cooling in the compartment
Loud humming, grinding, or buzzing noise from the freezer or fresh food compartment
Refrigerator running continuously without reaching set temperature
Fan blade not spinning freely or seized when checked by hand
Multimeter shows no continuity through the motor windings
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE French door refrigerators, including:
GE refrigerators — CFE28, CFE29, CWE23, CYE22, CYE23 series (CFE28TP2MBS1, CFE28USHNSS, CWE23SP2MBS1, CYE22TP2MBS1 and related)
GE refrigerators — DFE28, DFE29 series (DFE28JELCDS and related)
GE refrigerators — GFD28, GFE26, GFE27, GFE28, GFE29 series (GFD28GBLBTS, GFE26GGHEBB and related)
GE refrigerators — GFS26, GFS28, GNE26, GNE29 series
GE refrigerators — GYE22, GYS22 series (GYE22HMKEES and related)
GE refrigerators — PFD28, PFE28, PFE29 series (PFE28KELFDS and related)
GE refrigerators — PWE23 series (PWE23KSKDSS and related)
GE refrigerators — PYD22, PYE22, PYE23 series (PYE22KSKBSS and related)
GE refrigerators — ZWE23 series and select related Café and Profile French door models
Important — Software Update Requirement: If your GE refrigerator was manufactured between May 2014 and March 2015 with a serial number in the range FF–HD, the refrigerator's control software must be updated by GE factory service (or via Software Update Module WR98R882802) before installing this fan motor. Installing the new motor without the software update on these affected units may result in improper performance. Check your refrigerator's serial number plate before ordering.
Key Features
Axial evaporator fan motor for the fresh food section of GE French door refrigerators
Pulls air through the evaporator coils to remove heat and circulate cold air through the refrigerator compartment
DC motor — rated 13.6V DC, 0.16A — runs on DC voltage from the refrigerator control board
Includes the axial fan blade and pre-attached multi-color wire harness with plug
Fan housing dimensions: 3-4/7"L x 2"W x 3-1/8"H; harness and plug approximately 11-1/2" long
Quiet operation — engineered to minimize hum and vibration in the refrigerator cabinet
Plastic and metal construction, black housing with multi-color harness
Replaces an extensive list of GE part numbers including WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, and additional cross-references
Compatible with GE, GE Café, and GE Profile French door refrigerators in the CFE, CWE, CYE, DFE, GFD, GFE, GFS, GNE, GYE, GYS, PFD, PFE, PWE, PYD, PYE, and ZWE series
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
WR60X26866
Part Type
Refrigerator Evaporator Fan Motor (Fresh Food / Axial)
Condition
Aftermarket Replacement
Application
GE French Door Refrigerators
Voltage
13.6V DC
Amperage
0.16A
Fan Type
Axial
Fan Housing Dimensions
3-4/7"L x 2"W x 3-1/8"H
Harness Length
Approximately 11-1/2 inches
Color
Black housing with multi-color harness
Material
Plastic / Metal
Includes
Axial fan motor assembly with harness
Software Update Required
For May 2014 – Mar 2015 builds (serial range FF–HD) — use WR98R882802
Compatible Brands
GE, GE Café, GE Profile
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor for the fresh food section is mounted on the back wall of the fresh food (refrigerator) compartment, behind an access panel. Take a photo of the existing fan position and wire harness routing before disconnecting. Remove the shelves and any internal components blocking access to the back wall, then remove the screws holding the rear access panel in place. Disconnect the fan motor's wire harness connector and remove the mounting screws securing the old motor. Note the fan blade orientation on the motor shaft. Install the new WR60X26866 motor assembly in the same position with the blade facing the same direction, reconnect the wiring harness, and reinstall the mounting screws and access panel. Replace the shelves and other internal components, restore power, and confirm the fan spins and the refrigerator cools properly. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
My fridge is warm but my freezer is cold — is the evaporator fan motor the problem?
Yes — this is one of the most recognizable symptoms of evaporator fan motor failure on GE French door refrigerators with a separate fresh food evaporator. The freezer side has its own cooling circuit and remains cold, while the fresh food side relies on this fan to circulate air across its evaporator coils. When the fan fails, the freezer continues working but the fresh food compartment loses its cold air supply, warming up while the freezer stays at temperature. If you also notice frost building up on the evaporator coils behind the back panel of the fresh food compartment, the fan failure is confirmed.
What is the software update requirement for May 2014 – March 2015 refrigerators?
GE issued a software update for certain refrigerators manufactured between May 2014 and March 2015 (serial range FF–HD) before they could properly support newer revisions of the WR60X26866 evaporator fan motor. If your refrigerator falls in this date and serial range, the control software must be updated before installing this fan motor — either by GE factory service or by using the Software Update Module part WR98R882802. Installing the new fan on an unupdated unit can result in improper performance. Check the serial number plate inside your refrigerator (typically on the left side wall) to confirm whether your unit is affected. Refrigerators built outside this range do not require the update.
How do I test if the evaporator fan motor has failed?
Unplug the refrigerator, then access the fan behind the rear panel of the fresh food compartment. First, try turning the fan blade by hand — if it doesn't spin freely, is stiff, or seizes, the motor bearing has failed. Next, listen during normal operation — if the motor is unusually noisy or makes a grinding sound, the bearings are worn even if it still spins. Finally, with the unit unplugged and the motor disconnected, use a multimeter on the motor windings to check for continuity. If the windings show no continuity, the motor has failed electrically. Also check for approximately 11–14V DC at the connector when the refrigerator is running — if voltage is present but the motor doesn't spin, the motor has failed.
My fridge has two evaporator fans — which one does this replace?
Some GE French door refrigerators have separate evaporator fan motors for the freezer and the fresh food sections. The WR60X26866 is the fresh food evaporator fan motor — it's the axial fan located behind the rear panel of the fresh food compartment, not in the freezer. If your symptom is "freezer cold, fridge warm," this is the correct part. If your symptom is "freezer warm" or "ice maker not making ice but fridge is fine," the freezer evaporator fan motor (a different part number) is more likely the cause. Confirm which compartment has the cooling problem before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions, fan housing, electrical specifications, and pre-attached wire harness configuration of the original WR60X26866 evaporator fan motor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR60X25858 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X25858 is an aftermarket replacement freezer evaporator fan motor for GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore models. Located in the freezer compartment, this motor circulates air across the evaporator coil and out into the freezer and, on many models, the fresh food compartment, drawing heat out of the air to maintain consistent, efficient cooling throughout the appliance.
Rated 13.6V DC, 0.23 amps, with fan dimensions of approximately 4.5" x 4.5" and a wiring harness and plug extending about 8.25" from the frame. Common causes of failure include worn motor bearings or electrical failure over time. Symptoms of a failing evaporator fan motor include the freezer failing to cool properly and warming up, insufficient airflow, excessive frost buildup, higher-than-normal freezer temperatures, or unusual noise — often caused by frost or ice rubbing against the fan blade as it turns. It directly replaces WR60X25858, WR60X10340, 4931166, 239D1371P002, U11P14MS7AA3-57A61, AGE29632, AP6891698, EAP12727431, PD00054264, PS12727431.
Quick Answer
The XPARTCO WR60X25858 Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators with a freezer that's warming up, insufficient airflow, excessive frost, or unusual noise from the fan area. 13.6V DC, 0.23A, ~4.5" x 4.5", 8.25" harness. Replaces WR60X25858, WR60X10340, 4931166, 239D1371P002, U11P14MS7AA3-57A61, AGE29632, AP6891698, EAP12727431, PD00054264, PS12727431. If your freezer isn't cold, check the evaporator fan first — but while you're in there, cleaning frost or ice off the fan blade and vacuuming the condenser coils are worthwhile companion steps.
Common Problems This Part Fixes
Freezer not cooling properly, warming up
Insufficient airflow through the freezer compartment
Excessive frost buildup
Higher-than-normal freezer temperatures
Unusual noise from the fan area, including frost or ice rubbing on the blade
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This freezer evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X25858, WR60X10340, 4931166, 239D1371P002, U11P14MS7AA3-57A61, AGE29632, AP6891698, EAP12727431, PD00054264, PS12727431
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators built on the GE platform, including model numbers such as DFE29JSDFSS and DFE29JGDAWW.
Note: GE uses several different evaporator fan motors across its refrigerator lineup, including WR60X26866 and WR60X26033 for other models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Aftermarket replacement motor — built to OEM-equivalent design and airflow rating
Circulates air across the evaporator coil to draw heat out and cool the freezer
Resolves "freezer warming up," "insufficient airflow," "excessive frost," and "unusual noise" symptoms
Rated 13.6V DC, 0.23 amps
Approximately 4.5" x 4.5", with an 8.25" wiring harness and plug
Direct drop-in replacement matching the original mounting and connections
Replaces WR60X25858, WR60X10340, 4931166, 239D1371P002, U11P14MS7AA3-57A61, AGE29632, AP6891698, EAP12727431, PD00054264, PS12727431
Compatible with GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY-friendly repair, typically 15 to 30 minutes
Product Specifications
Part Number
XPWR60X25858
OEM Part Number
WR60X25858
Part Type
Freezer Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
GE
Location
Freezer compartment
Voltage
13.6V DC
Amperage
0.23 A
Fan Dimensions
Approx. 4.5" x 4.5"
Harness/Plug Length
Approx. 8.25" from frame
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Profile, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Clear Any Frost Or Ice From The Fan Area Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Locate the evaporator fan motor in the freezer compartment, typically behind an interior panel covering the evaporator coil assembly. If there's noticeable frost or ice buildup around the fan or coil, allow it to fully defrost before continuing — restricted airflow from ice is a common contributor to fan motor strain and noise. Remove the panel to access the fan motor, then disconnect the wiring harness from the old motor. Remove the mounting screws or clips securing the old motor and pull it free, along with the fan blade if it doesn't transfer separately. Install the new WR60X25858 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the interior panel. While you're in this area, vacuuming out any accessible condenser coils is a good complementary maintenance step. Restore power and monitor the freezer's temperature over the next 24 hours to confirm normal, quiet operation and consistent cooling. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My freezer isn't cold anymore. Is this the part I need?
Yes, this is one of the most common causes of a freezer that won't cool. One customer specifically reached out after their freezer wasn't cold, watched a diagnostic video explaining the evaporator fan's role, and confirmed this motor was the cause before ordering the replacement.
I hear a strange noise from inside my freezer. Could this be the fan motor?
Yes, this is a well-documented symptom. Noise often occurs when the fan motor itself is wearing out, or when frost or ice has built up enough to rub against the spinning fan blade. Clearing any ice buildup before replacing the motor helps you confirm whether the noise was from ice contact or the motor itself.
Should I do anything else while I have the freezer open for this repair?
It's a good opportunity to check for and clear any frost or ice buildup around the fan and coil area, since restricted airflow can contribute to fan strain. One customer also vacuumed out the condenser coils during the same repair, which is a reasonable companion maintenance step while everything is accessible.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the motor design, voltage, and connection type of the original WR60X25858 evaporator fan motor used in compatible GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WP2315548 Refrigerator Genuine Evaporator Fan Motor
Replaces Part Numbers: WP2315548, 2315548, 1194733, 2220149, AP6007249, PS11740361.
Description: The Evaporator Fan Motor is a Genuine OEM part for specific Whirlpool, Maytag refrigerator models. It is responsible for circulating cold air within the fridge and freezer compartments, helping to maintain even temperatures and keep food fresh. Causes of a bad evaporator fan motor include failure due to normal wear and tear over time, damage due to improper cleaning, or issues with the motor's electronic components.
XPARTCO 4681JB1029A Refrigerator Evaporator Fan Motor – Compatible with LG and Kenmore Refrigerators
Product Description
Keep your refrigerator cooling evenly with the XPARTCO 4681JB1029A Refrigerator Evaporator Fan Motor. This Fan Motor is a replacement component for specific LG, Kenmore refrigerator models. It operates the circulation fan located in the back of the refrigerator compartment, distributing cool air evenly throughout. The motor enables constant airflow across shelves and compartments to maintain consistent temperatures and humidity levels. Causes of a bad fan motor include failure of bearings or windings due to prolonged use.
Replaces Part Numbers
4681JB1029A, EAU60694507, 1330410, 4681JB1010C, 4681JB1017A, 4681JB1017D, 4681JB1027A, EAU61762902, EAU41921810, PD00037982, EAP3523328, AH3523328, EA3523328, AP4438221, PS3523328.
Compatibility
This replacement evaporator fan motor fits select LG and Kenmore refrigerators.
Example compatible models include (but are not limited to): LG LFX25960ST, LG LFX28968ST, and Kenmore 795.77543600.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to meet OEM airflow and reliability standards
❄️ Efficient Air Circulation – Distributes cold air evenly through refrigerator and freezer
💰 Affordable Solution – Quality replacement at a lower cost than OEM parts
🛠️ DIY Installation – Simple plug-in wiring connector for quick installation
🛡️ Fixes Common Issues – Solves frost buildup, uneven cooling, or noisy fan problems
📐 Product Specification
Part Number: 4681JB1029A
Component Type: Refrigerator Evaporator Fan Motor
Material: Metal motor housing with balanced plastic fan blade
Mounting: Direct-fit replacement in freezer evaporator compartment
Operating Conditions: Designed for continuous low-temperature operation
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the refrigerator before performing repairs to prevent electrical shock.
Steps:
Unplug the refrigerator.
Remove shelves and freezer rear panel to access the evaporator area.
Disconnect the wiring harness and mounting screws on the old fan motor.
Install the new XPARTCO 4681JB1029A motor, reconnect wiring, and secure the panel.
Restore power and verify quiet, consistent airflow.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore efficient, even cooling — Add to Cart Now for a reliable, budget-friendly repair!
WR60X25858 Freezer Genuine OEM Evaporator Fan Motor
The WR60X25858 is a genuine GE OEM freezer evaporator fan motor for GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore models. Located in the freezer compartment, this motor circulates air across the evaporator coil and out into the freezer and, on many models, the fresh food compartment, drawing heat out of the air to maintain consistent, efficient cooling throughout the appliance.
Rated 13.6V DC, 0.23 amps, with fan dimensions of approximately 4.5" x 4.5" and a wiring harness and plug extending about 8.25" from the frame. Common causes of failure include worn motor bearings or electrical failure over time. Symptoms of a failing evaporator fan motor include the freezer failing to cool properly and warming up, insufficient airflow, excessive frost buildup, higher-than-normal freezer temperatures, or unusual noise — often caused by frost or ice rubbing against the fan blade as it turns. It directly replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431.
Quick Answer
The WR60X25858 Freezer Genuine OEM Evaporator Fan Motor fixes GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators with a freezer that's warming up, insufficient airflow, excessive frost, or unusual noise from the fan area. 13.6V DC, 0.23A, ~4.5" x 4.5", 8.25" harness. Replaces 239D1371P002, 3033253, 4931166, AP5669723, AP6891698, EAP12727431, EAP7320382, PS12727431, PS7320382, U11P14MS7AA3-57A61, WR60X10340, AGE29632. If your freezer isn't cold, check the evaporator fan first — but while you're in there, cleaning frost or ice off the fan blade and vacuuming the condenser coils are worthwhile companion steps.
Common Problems This Part Fixes
Freezer not cooling properly, warming up
Insufficient airflow through the freezer compartment
Excessive frost buildup
Higher-than-normal freezer temperatures
Unusual noise from the fan area, including frost or ice rubbing on the blade
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This freezer evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators built on the GE platform, including model numbers such as DFE29JSDFSS and DFE29JGDAWW.
Note: GE uses several different evaporator fan motors across its refrigerator lineup, including WR60X26866 and WR60X26033 for other models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Genuine GE OEM part — factory-specified motor design and airflow rating
Circulates air across the evaporator coil to draw heat out and cool the freezer
Resolves "freezer warming up," "insufficient airflow," "excessive frost," and "unusual noise" symptoms
Rated 13.6V DC, 0.23 amps
Approximately 4.5" x 4.5", with an 8.25" wiring harness and plug
Direct drop-in replacement matching the original mounting and connections
Replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
Compatible with GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, typically 15 to 30 minutes
Product Specifications
Part Number
WR60X25858
Part Type
Freezer Evaporator Fan Motor
Condition
Genuine OEM
Brand
GE
Location
Freezer compartment
Voltage
13.6V DC
Amperage
0.23 A
Fan Dimensions
Approx. 4.5" x 4.5"
Harness/Plug Length
Approx. 8.25" from frame
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Profile, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Clear Any Frost Or Ice From The Fan Area Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Locate the evaporator fan motor in the freezer compartment, typically behind an interior panel covering the evaporator coil assembly. If there's noticeable frost or ice buildup around the fan or coil, allow it to fully defrost before continuing — restricted airflow from ice is a common contributor to fan motor strain and noise. Remove the panel to access the fan motor, then disconnect the wiring harness from the old motor. Remove the mounting screws or clips securing the old motor and pull it free, along with the fan blade if it doesn't transfer separately. Install the new WR60X25858 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the interior panel. While you're in this area, vacuuming out any accessible condenser coils is a good complementary maintenance step. Restore power and monitor the freezer's temperature over the next 24 hours to confirm normal, quiet operation and consistent cooling. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My freezer isn't cold anymore. Is this the part I need?
Yes, this is one of the most common causes of a freezer that won't cool. One customer specifically reached out after their freezer wasn't cold, watched a diagnostic video explaining the evaporator fan's role, and confirmed this motor was the cause before ordering the replacement.
I hear a strange noise from inside my freezer. Could this be the fan motor?
Yes, this is a well-documented symptom. Noise often occurs when the fan motor itself is wearing out, or when frost or ice has built up enough to rub against the spinning fan blade. Clearing any ice buildup before replacing the motor helps you confirm whether the noise was from ice contact or the motor itself.
Should I do anything else while I have the freezer open for this repair?
It's a good opportunity to check for and clear any frost or ice buildup around the fan and coil area, since restricted airflow can contribute to fan strain. One customer also vacuumed out the condenser coils during the same repair, which is a reasonable companion maintenance step while everything is accessible.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, voltage, and connection type of the evaporator fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR60X26866 Genuine OEM GE Refrigerator Axial Evaporator Fan Motor
The WR60X26866 is a Genuine OEM GE replacement axial evaporator fan motor manufactured by GE to factory specifications, designed as a direct fit for the fresh food section of select GE French door refrigerators, including the CFE28, CFE29, CWE23, CYE22, CYE23, DFE28, DFE29, GFD28, GFE26, GFE27, GFE28, GFE29, GFS26, GFS28, GNE26, GNE29, GYE22, GYS22, PFD28, PFE28, PFE29, PWE23, PYD22, PYE22, PYE23, and ZWE23 series. The evaporator fan motor pulls air through the evaporator coils to remove heat from the circulating air inside the refrigerator. Without a functioning evaporator fan, the refrigerator compartment cannot maintain its target temperature even when the compressor and condenser are running normally — the cold air generated at the evaporator simply isn't being circulated to the food storage areas.
The WR60X26866 is a DC motor rated at 13.6V DC, 0.16A, with a fan housing measuring 3-4/7"L x 2"W x 3-1/8"H, plus a multi-color wire harness and plug approximately 11-1/2" long. It includes the axial fan blade and harness as a complete assembly. It directly replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, and PS12172983. Important: if your refrigerator was built between May 2014 and March 2015 with serial range FF–HD, the unit's software must be updated before installing this fan motor — see FAQ below. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The WR60X26866 Genuine OEM GE Refrigerator Axial Evaporator Fan Motor fixes GE French door refrigerators where the fridge isn't cooling but the freezer is cold, the evaporator coils are frosted over, the ice maker isn't working due to insufficient cooling, or there's loud humming or grinding from the freezer area. Axial fan motor, 13.6V DC, 0.16A. Fan housing: 3-4/7"L x 2"W x 3-1/8"H; harness ~11-1/2"L. Replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, PS12172983. Note: May 2014 – Mar 2015 build refrigerators (serial range FF–HD) require a software update before installation.
Common Problems This Part Fixes
Refrigerator not cooling properly while the freezer remains cold — classic evaporator fan failure
Freezer cold but fridge warm — fresh food compartment air not being circulated
Frosty or frozen evaporator coils due to insufficient air circulation
Ice maker failure caused by inadequate cooling in the compartment
Loud humming, grinding, or buzzing noise from the freezer or fresh food compartment
Refrigerator running continuously without reaching set temperature
Fan blade not spinning freely or seized when checked by hand
Multimeter shows no continuity through the motor windings
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE French door refrigerators, including:
GE refrigerators — CFE28, CFE29, CWE23, CYE22, CYE23 series (CFE28TP2MBS1, CFE28USHNSS, CWE23SP2MBS1, CYE22TP2MBS1 and related)
GE refrigerators — DFE28, DFE29 series (DFE28JELCDS and related)
GE refrigerators — GFD28, GFE26, GFE27, GFE28, GFE29 series (GFD28GBLBTS, GFE26GGHEBB and related)
GE refrigerators — GFS26, GFS28, GNE26, GNE29 series
GE refrigerators — GYE22, GYS22 series (GYE22HMKEES and related)
GE refrigerators — PFD28, PFE28, PFE29 series (PFE28KELFDS and related)
GE refrigerators — PWE23 series (PWE23KSKDSS and related)
GE refrigerators — PYD22, PYE22, PYE23 series (PYE22KSKBSS and related)
GE refrigerators — ZWE23 series and select related Café and Profile French door models
Important — Software Update Requirement: If your GE refrigerator was manufactured between May 2014 and March 2015 with a serial number in the range FF–HD, the refrigerator's control software must be updated by GE factory service (or via Software Update Module WR98R882802) before installing this fan motor. Installing the new motor without the software update on these affected units may result in improper performance. Check your refrigerator's serial number plate before ordering.
Key Features
Axial evaporator fan motor for the fresh food section of GE French door refrigerators
Pulls air through the evaporator coils to remove heat and circulate cold air through the refrigerator compartment
DC motor — rated 13.6V DC, 0.16A — runs on DC voltage from the refrigerator control board
Includes the axial fan blade and pre-attached multi-color wire harness with plug
Fan housing dimensions: 3-4/7"L x 2"W x 3-1/8"H; harness and plug approximately 11-1/2" long
Quiet operation — engineered to minimize hum and vibration in the refrigerator cabinet
Plastic and metal construction, black housing with multi-color harness
Replaces an extensive list of GE part numbers including WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, and additional cross-references
Compatible with GE, GE Café, and GE Profile French door refrigerators in the CFE, CWE, CYE, DFE, GFD, GFE, GFS, GNE, GYE, GYS, PFD, PFE, PWE, PYD, PYE, and ZWE series
Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
WR60X26866
Part Type
Refrigerator Evaporator Fan Motor (Fresh Food / Axial)
Condition
Genuine OEM
Application
GE French Door Refrigerators
Voltage
13.6V DC
Amperage
0.16A
Fan Type
Axial
Fan Housing Dimensions
3-4/7"L x 2"W x 3-1/8"H
Harness Length
Approximately 11-1/2 inches
Color
Black housing with multi-color harness
Material
Plastic / Metal
Includes
Axial fan motor assembly with harness
Software Update Required
For May 2014 – Mar 2015 builds (serial range FF–HD) — use WR98R882802
Compatible Brands
GE, GE Café, GE Profile
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor for the fresh food section is mounted on the back wall of the fresh food (refrigerator) compartment, behind an access panel. Take a photo of the existing fan position and wire harness routing before disconnecting. Remove the shelves and any internal components blocking access to the back wall, then remove the screws holding the rear access panel in place. Disconnect the fan motor's wire harness connector and remove the mounting screws securing the old motor. Note the fan blade orientation on the motor shaft. Install the new WR60X26866 motor assembly in the same position with the blade facing the same direction, reconnect the wiring harness, and reinstall the mounting screws and access panel. Replace the shelves and other internal components, restore power, and confirm the fan spins and the refrigerator cools properly. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
My fridge is warm but my freezer is cold — is the evaporator fan motor the problem?
Yes — this is one of the most recognizable symptoms of evaporator fan motor failure on GE French door refrigerators with a separate fresh food evaporator. The freezer side has its own cooling circuit and remains cold, while the fresh food side relies on this fan to circulate air across its evaporator coils. When the fan fails, the freezer continues working but the fresh food compartment loses its cold air supply, warming up while the freezer stays at temperature. If you also notice frost building up on the evaporator coils behind the back panel of the fresh food compartment, the fan failure is confirmed.
What is the software update requirement for May 2014 – March 2015 refrigerators?
GE issued a software update for certain refrigerators manufactured between May 2014 and March 2015 (serial range FF–HD) before they could properly support newer revisions of the WR60X26866 evaporator fan motor. If your refrigerator falls in this date and serial range, the control software must be updated before installing this fan motor — either by GE factory service or by using the Software Update Module part WR98R882802. Installing the new fan on an unupdated unit can result in improper performance. Check the serial number plate inside your refrigerator (typically on the left side wall) to confirm whether your unit is affected. Refrigerators built outside this range do not require the update.
How do I test if the evaporator fan motor has failed?
Unplug the refrigerator, then access the fan behind the rear panel of the fresh food compartment. First, try turning the fan blade by hand — if it doesn't spin freely, is stiff, or seizes, the motor bearing has failed. Next, listen during normal operation — if the motor is unusually noisy or makes a grinding sound, the bearings are worn even if it still spins. Finally, with the unit unplugged and the motor disconnected, use a multimeter on the motor windings to check for continuity. If the windings show no continuity, the motor has failed electrically. Also check for approximately 11–14V DC at the connector when the refrigerator is running — if voltage is present but the motor doesn't spin, the motor has failed.
My fridge has two evaporator fans — which one does this replace?
Some GE French door refrigerators have separate evaporator fan motors for the freezer and the fresh food sections. The WR60X26866 is the fresh food evaporator fan motor — it's the axial fan located behind the rear panel of the fresh food compartment, not in the freezer. If your symptom is "freezer cold, fridge warm," this is the correct part. If your symptom is "freezer warm" or "ice maker not making ice but fridge is fine," the freezer evaporator fan motor (a different part number) is more likely the cause. Confirm which compartment has the cooling problem before ordering.
Is this an OEM or aftermarket part?
This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same axial evaporator fan motor installed in compatible GE, GE Café, and GE Profile French door refrigerators from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
