W11414076 Genuine OEM Whirlpool Dishwasher Circulation Pump Motor Assembly
The W11414076 is a Genuine OEM Whirlpool replacement circulation pump and motor assembly compatible with a wide range of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea dishwashers. The circulation pump is the heart of the wash system — it pressurizes and delivers water to the spray arms, driving the jets that blast food and residue off your dishes throughout the wash and rinse cycles. When the circulation pump fails, cleaning performance collapses: dishes come out dirty or unrinsed, water pressure at the spray arms drops, and the machine may make loud droning or grinding noises.
This is a complete circulation pump and motor assembly. Common causes of failure include worn motor bearings (which produce a continuous drone that gets louder over time), deteriorated impellers, and seal breakdowns. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the W11414076 is the current production part that supersedes W11122133. It also replaces AP6980104, EAP12745416, PS12745416, 4958907, and OEM20940317. Note: this assembly does not include the drain pump — your existing drain pump transfers over to the new assembly during installation. Installs in 45–90 minutes with basic hand tools (the dishwasher must be pulled out and laid on its back to access the pump).
Quick Answer
The W11414076 Genuine OEM Whirlpool Dishwasher Circulation Pump Motor Assembly fixes Whirlpool, KitchenAid, Maytag, Jenn-Air, and Amana dishwashers where dishes come out dirty or unrinsed, water pressure at the spray arms is weak, water pools in the tub, or the motor makes a loud droning/grinding noise. Complete circulation pump + motor assembly. Genuine OEM. Current part superseding W11122133; also replaces AP6980104, EAP12745416, PS12745416, 4958907, OEM20940317. Before ordering: if the motor runs but water is weak, try cleaning the impeller filter screen first — see the FAQ.
Common Problems This Part Fixes
Dishes coming out dirty or unrinsed — circulation pump not delivering water to the spray arms
Weak water pressure at the spray arms — impeller worn or motor failing
Loud droning noise that gets louder over time — worn motor bearings
Grinding or unusual noise during operation
Water retention/pooling in the bottom of the tub
Leaks from the pump housing — seal breakdown
Motor humming but spray arms barely turning
Reduced cleaning performance overall
Motor not running at all — failed pump motor windings
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This circulation pump motor assembly directly replaces the following OEM and cross-reference part numbers:
W11414076, W11122133, AP6980104, EAP12745416, PS12745416, 4958907, OEM20940321, AWP45352, PD00070783
W11414076 is the current OEM production part superseding W11122133. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This circulation pump motor assembly is compatible with select dishwashers from the following brands:
Whirlpool dishwashers — select models (verify with your parts diagram)
KitchenAid dishwashers — select models
Maytag dishwashers — select models
Jenn-Air dishwashers — select models
Amana dishwashers — select models
Magic Chef dishwashers — select models
Admiral dishwashers — select models
Norge dishwashers — select models
Roper dishwashers — select models
Kenmore / Sears dishwashers — select Whirlpool-built models
Ikea dishwashers — select Whirlpool-built models
This assembly may comprise several parts — refer to your specific parts diagram to verify included items. Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Circulation pump and motor assembly — pressurizes and delivers water to the spray arms for effective cleaning and rinsing
Resolves "dirty dishes," "weak water pressure," "loud droning motor," "grinding noise," and "water pooling" symptoms when caused by pump failure
Addresses the common failure modes: worn motor bearings, deteriorated impellers, and seal breakdowns
Current OEM production part — directly supersedes W11122133
Also replaces AP6980104, EAP12745416, PS12745416, 4958907, and OEM20940317
Motor separates from the pump case with 3 Torx screws — some customers replace only the motor if the pump case is fine
Drain pump is not included — your existing drain pump transfers to the new assembly
Compatible with Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea dishwashers
DIY repair — installs in 45–90 minutes with basic hand tools
Product Specifications
Part Number
W11414076
Supersedes
W11122133
Part Type
Dishwasher Circulation Pump & Motor Assembly
Condition
Genuine OEM
Application
Dishwashers (Whirlpool platform)
Function
Delivers water to the spray arms for washing and rinsing
Motor Attachment
Separates from pump case with 3 Torx screws
Drain Pump
Not included — transfer your existing drain pump
Location
Bottom of dishwasher (access by laying unit on its back)
Compatible Brands
Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea
Installation Notes
⚠️ Unplug Dishwasher and Shut Off Water Before Starting — Wear Work Gloves — Major Access Required Disconnect power at the breaker and shut off the water supply before beginning. Wear work gloves to protect your hands. This is a more involved repair because the circulation pump is on the bottom of the dishwasher. Throw the circuit breaker, remove the lower access panel, and open the electrical box to completely disconnect the electrical from the dishwasher. Disconnect the water supply line and the drain line. Remove the anchor screws securing the dishwasher to the counter, then pull the dishwasher out of the cabinet. Have a large towel ready — rotate the dishwasher and lay it on its back to access the pump on the bottom. Photograph everything before disconnecting. Disconnect all connections to the main circulation pump: the drain pump, the electrical connections, the leak-detection plate and circuit, and the water lines. Undo all clamps to the circulation pump. Remove the old circulation pump assembly. Transfer your existing drain pump to the new W11414076 assembly — it is not included. (If you're only replacing a noisy motor and the pump case is good, the motor separates from the case with 3 Torx screws and can be swapped on its own.) Install the new assembly, reconnect the drain pump, electrical connections, leak-detection plate, water lines, and all clamps, matching your photos. Stand the dishwasher back up, slide it into the cabinet, reconnect water/drain/electrical, and secure the anchor screws. Run a short test cycle and check for leaks. Note: use your dishwasher's onboard diagnostic function to confirm the pump was the issue — light/error codes vary by model, so check the quick guide that came with your specific dishwasher rather than relying on codes listed online for other models. Tools needed: Phillips screwdriver, Torx driver (T-set), nut driver, pliers, large towel, work gloves.
Frequently Asked Questions
The motor runs but water barely reaches the spray arms — do I definitely need a new pump?
Maybe not — try this first, because it could save you the entire repair. On many KitchenAid/Whirlpool-platform dishwashers, there's a fine filter screen INSIDE the circulation pump on the impeller. This screen can clog with microplastics and fine food particles over time (sometimes after a surprisingly small number of wash cycles), which chokes off water flow even though the motor is running perfectly. The screen can look clean but still be blocked — a real-world test is to hold water in the mesh cup: if it holds water like a cup instead of draining freely, it's clogged. Cleaning it with a toothbrush restores full flow. To access it you do have to pull the pump (the same disassembly as replacing it, then 2 Torx screws to open the pump), so if you're already this far in, disassemble and inspect the screen BEFORE installing a new pump — you may find the old pump is perfectly good. Running a dishwasher-safe cleaning product through the machine first is also worth a try.
My dishwasher motor is loud and getting louder — is that the pump?
Yes, that's a classic sign of worn circulation pump motor bearings. The motor bearings wear out over time, and as they degrade they produce a continuous drone that steadily gets louder. Once the bearings have failed, the noise won't go away on its own and the motor should be replaced. On this assembly, the motor separates from the pump case with 3 Torx screws — some customers who only have a bearing/noise problem (and an otherwise good pump case) simply swap the motor and reuse the case. If you order the full assembly, you get both, and you can decide during the repair whether to swap just the motor or the whole thing.
Does this come with the drain pump?
No — the W11414076 is the circulation pump and motor assembly, and it does not include the drain pump. During installation, you'll transfer your existing drain pump from the old assembly to the new one (it detaches and reattaches). This is normal for this repair. If your drain pump is also failing (separate symptoms: won't drain, water left standing after the cycle), that's a different part you'd order separately. The circulation pump handles washing/spray pressure; the drain pump handles emptying the tub.
What's the difference between W11414076 and W11122133?
These are the same circulation pump assembly across production revisions. W11122133 was the earlier OEM part number, and W11414076 is the current production version that Whirlpool issued as its direct replacement. Both are physically and functionally interchangeable — if your dishwasher's parts diagram shows W11122133, the W11414076 is the correct current replacement, and this listing covers both. The cross-references AP6980104, PS12745416, and 4958907 are additional catalog identifiers for the same part.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same circulation pump and motor assembly installed in compatible Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, and Kenmore Whirlpool-built dishwashers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ERP 5304506516 Dishwasher Upper Spray Arm
Dishwasher Upper Spray Arm
Replaces Part Numbers: 5304506516, 154754502, 154478201, 154478202, 154607802, 154698901, 154698902, AP6036336, PS11770483.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 8269145 Dishwasher Mounting Bracket (Pack of 2) – Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana Dishwashers
Product Description
Securely mount your dishwasher with the XPARTCO 8269145 Dishwasher Mounting Bracket (Pack of 2). These brackets are designed to fasten your dishwasher to the countertop, cabinet, or side panel to prevent shifting during use. Perfect for installations where stability is critical, this kit provides a reliable and cost-effective replacement solution.
Replaces Part Numbers
WP8269145, 8269145, PD00002628, EAP11745496, AP6012289, PS11745496, WP8269145VP.
Compatibility
These mounting brackets are compatible with select Whirlpool, Kenmore, KitchenAid, Maytag, and Amana dishwashers.
Example compatible models include (but are not limited to): Whirlpool WDF520PADM7, KitchenAid KUDS30IXBL8, Kenmore 665.13293K114.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Broad Compatibility – Works with Whirlpool, Kenmore, KitchenAid, Maytag, and Amana dishwashers
🔧 Secure Mounting – Keeps dishwasher firmly attached to cabinets or countertop
💰 Cost-Effective Alternative – OEM-equivalent quality at a lower price
🛠️ Easy Installation – Installs in minutes with standard tools
📦 Value Pack – Includes 2 brackets for a complete repair or installation
📐 Product Specification
Part Number: 8269145
Component Type: Dishwasher Mounting Bracket (Pack of 2)
Material: Heavy-duty metal construction
Mounting: Attaches to countertop, side cabinet, or panel
Operating Conditions: Standard dishwasher installations
Compliance: OEM-equivalent performance standards
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, drill (if required)
⚠️ Safety First: Always disconnect power before working on your dishwasher to avoid electrical shock.
Steps:
Unplug dishwasher and turn off water supply.
Open dishwasher door and locate mounting positions.
Position bracket at the top or side of dishwasher frame.
Secure bracket with screws to the cabinet or countertop.
Reconnect power, turn on water, and test installation.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Secure your dishwasher properly with this budget-friendly fix — Add to Cart Now for fast, reliable installation!
WD21X25468 Genuine OEM GE Dishwasher Pressure Sensor Assembly
The WD21X25468 is a Genuine OEM GE replacement dishwasher pressure sensor assembly compatible with a wide range of GE, GE Profile, GE Café, Hotpoint, Haier, and Monogram dishwashers in the GDF, GDT, GDP, PDT, CDT, ZDT, QDP, and HDF series. The pressure sensor monitors water pressure inside the dishwasher tub during fill and drain cycles and sends real-time readings to the electronic control board. The control board uses these readings to calculate the correct amount of water needed for each wash cycle and to confirm that the tub has drained properly before advancing to the next cycle phase.
When the pressure sensor fails — or when it becomes clogged with grease, food residue, or mineral buildup — the dishwasher may not fill with water, may overfill, may stop mid-cycle, may fail to drain correctly, or may display error codes H2O or FTD (Failure to Drain). This Genuine OEM part is manufactured by GE to factory specifications. It directly replaces AP6976524, PS12741258, EAP12741258, 4962334, 37640602, and 265D3356P001. Sold individually. Installs in 15–20 minutes — a screwdriver is the only tool required for most models.
Quick Answer
The WD21X25468 Genuine OEM GE Dishwasher Pressure Sensor Assembly fixes GE dishwashers displaying error codes H2O or FTD (Failure to Drain), not filling with water, overfilling, stopping mid-cycle, or running excessive noise from the spray arms. Monitors water level and pressure — signals the control board to fill, wash, and drain correctly. Genuine OEM. Replaces AP6976524, PS12741258, EAP12741258, 4962334, 37640602, 265D3356P001. Sold individually. Compatible with GE GDF, GDT, PDT, CDT, ZDT, QDP, HDF, and related series.
Common Problems This Part Fixes
Error code H2O displayed — dishwasher not receiving enough water or no water at all
Error code FTD (Failure to Drain) displayed — sensor not confirming tub has drained
Dishwasher not filling with water when a cycle is started
Dishwasher overfilling — sensor not signaling the control board to stop filling
Dishwasher stopping mid-cycle without completing the wash
Excessive noise during operation — sensor not accurately controlling spray arm water pressure
Dishwasher requires priming with water to start (filling the tub manually before it will run)
Replaces Part Numbers
This pressure sensor directly replaces the following OEM and cross-reference part numbers:
WD21X25468, 265D3356P001, AGE24772, AP6976524, EAP12741258, PD00067609, PS12741258.
Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This pressure sensor is compatible with a wide range of dishwashers from the following GE product lines:
GE dishwashers — GDF450, GDF510, GDF511, GDF535, GDF550, GDF565, GDF570, GDF630, GDF640, GDF645 series
GE dishwashers — GDT530, GDT535, GDT565, GDT580, GDT605, GDT625, GDT630, GDT635, GDT645, GDT695 series
GE dishwashers — GDP615, GDP645, GDP665 series
GE Profile dishwashers — PDT715, PDT775, PDT785 series
GE Café dishwashers — CDT800, CDT875 series
GE Monogram dishwashers — ZDT800, ZDT870, ZDT925, ZDT985 series
Hotpoint dishwashers — HDF310, HDF330 series
Haier dishwashers (select GE-platform models)
GE / Café / Profile — QDP555 series
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance
Monitors water pressure inside the tub throughout fill and drain cycles — signals the control board to fill to the correct level and confirm complete drainage
Resolves H2O and FTD error codes on compatible GE dishwashers
Sensor can also fail due to grease or mineral buildup blocking the pressure port — cleaning may resolve the issue without replacement
Replaces AP6976524, PS12741258, EAP12741258, 4962334, 37640602, and 265D3356P001
Compatible with GE GDF, GDT, GDP, PDT, CDT, ZDT, QDP, HDF, and Hotpoint dishwasher series
Sold individually
Quick DIY repair — installs in 15–20 minutes with a screwdriver
Product Specifications
Part Number
WD21X25468
Part Type
Dishwasher Pressure Sensor Assembly (Pressure Switch)
Condition
Genuine OEM
Application
GE, GE Profile, GE Café, GE Monogram, Hotpoint, Haier Dishwashers
Function
Monitors tub water level and pressure — signals control board for fill and drain control
Error Codes Resolved
H2O (no/low water), FTD (Failure to Drain)
Sold As
Single sensor assembly
Compatible Brands
GE, GE Profile, GE Café, GE Monogram, Hotpoint, Haier
Installation Notes
⚠️ Unplug Dishwasher and Shut Off Water Before Starting Disconnect power and shut off the water supply before beginning. On most compatible GE models, the pressure sensor is located near the bottom of the dishwasher tub, accessible after removing the lower front kick panel (secured by one or two screws). The sensor assembly connects to a small hose and a wiring harness connector. Tip: before replacing the sensor, remove it and inspect the pressure port and hose for grease, food residue, or mineral buildup — a clogged sensor port can cause H2O and FTD errors without the sensor itself being electrically failed. Clean the port and hose with warm water and a small brush, reinstall, and test the dishwasher. If the error codes persist after cleaning, replace the WD21X25468 sensor. To replace: disconnect the hose and wiring harness from the old sensor, unclip or unscrew the sensor from its mounting bracket, and install the new sensor in the same position. Reconnect the hose and harness, restore power and water, and run a test cycle. Tools needed: Phillips screwdriver.
Frequently Asked Questions
What does the dishwasher pressure sensor do?
The pressure sensor monitors the water pressure — and therefore the water level — inside the dishwasher tub throughout the wash cycle. It sends continuous readings to the electronic control board, which uses the data to determine how much water to add during fill, when to stop filling, and whether the tub has drained completely before advancing to the next cycle phase. An accurate pressure sensor is essential for the dishwasher to fill to the correct level (not too much, not too little), wash with the correct spray arm pressure, and drain fully before moving on to rinse or dry cycles.
What do error codes H2O and FTD mean on GE dishwashers?
H2O error code on compatible GE dishwashers indicates that the dishwasher is not detecting enough water in the tub — either water is not filling at all, or the pressure sensor is not sensing the water that has filled. FTD (Failure to Drain) code indicates the dishwasher has not confirmed that the tub has drained within the expected time. Both codes can be caused by a faulty pressure sensor, a clogged sensor port, a failed fill valve, a blocked drain system, or control board issues. The pressure sensor should be inspected and tested first since it is the most accessible and commonly replaced component for these two error codes.
Should I try cleaning the sensor before replacing it?
Yes — absolutely. The pressure sensor on GE dishwashers can produce H2O and FTD error codes when its pressure port or connected hose becomes clogged with grease, food residue, or hard water mineral deposits — even if the sensor itself is electrically intact. Before ordering a replacement, remove the sensor, inspect the pressure port opening, and clean it thoroughly with warm water and a small brush. Flush the connected hose to clear any buildup. Reinstall and run a test cycle. If the error codes return, the sensor has electrically failed and needs replacement with the WD21X25468.
My dishwasher won't fill unless I pour water in manually first — is this the pressure sensor?
Yes — this is a classic symptom of a clogged or failed pressure sensor. When the sensor port is blocked, the sensor reads zero pressure (empty tub) even when the dishwasher starts. In some cases the control board interprets this as a drainage confirmation and will not initiate the fill cycle. Pouring water into the filter manually raises the physical water level enough to trigger filling. Check and clean the sensor port as described above. If cleaning does not resolve the issue, replace the WD21X25468 sensor.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same pressure sensor assembly installed in compatible GE, GE Profile, GE Café, Hotpoint, and related brand dishwashers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WD08X10057 Dishwasher Door Gasket
📝 Product Description
Stop leaks and restore a tight door seal with the XPARTCO WD08X10057 Dishwasher Door Gasket. This Dishwasher Door Gasket is a replacement Part designed for specific GE, Hotpoint dishwasher models. This part is crucial as it seals the gap between the dishwasher tub's opening and the outer edge of the door. The gasket prevents water leakage during operation. With a length of 89 inches and a width of one-sixteenth of an inch, this door gasket is a perfect fit for models that it's designed for. It's an ideal replacement for old gaskets that are cracked, torn, or shrunken.
⚡ Quick Answer
If your dishwasher is leaking from the door or you notice moisture around the front, the WD08X10057 door gasket may be worn or damaged. Replacing it restores a proper seal and prevents leaks.
🔄 Replaces Part Numbers
Replaces OEM part number: WD08X10057, 1088473, WD08X10014, WD8X10014, AGE24065, EAP958908, PD00001117, AP3798079, PS958908.
🔧 Compatibility
This dishwasher door gasket is compatible with many GE, Hotpoint, and other GE-manufactured dishwashers.
✔️ GE Dishwashers
✔️ Hotpoint Dishwashers
✔️ GE Profile Dishwashers
Always verify your appliance model number before ordering to ensure proper fit.
🛠️ Common Problems This Part Fixes
❌ Water leaking from dishwasher door
❌ Moisture buildup around door seal
❌ Poor sealing causing inefficient washing
❌ Cracked, brittle, or worn gasket
✨ Key Features
✔️ Designed for GE dishwasher compatibility
✔️ Creates a tight, leak-proof door seal
✔️ High-quality flexible rubber construction
✔️ Easy to install replacement
📊 Product Specification
Part Number: WD08X10057
Part Type: Dishwasher Door Gasket
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Material: Flexible Rubber
⏳ When Should You Replace This Gasket?
Replace the gasket if you notice water leaking from the door, visible cracks, stiffness, or if the seal no longer fits snugly.
⚠️ Installation Notes
⚠️ Disconnect power before installation. Remove the old gasket from the channel and press the new gasket evenly into place around the door frame.
❓ Frequently Asked Questions
🔹 Will this gasket fit my dishwasher?This gasket fits many GE and compatible dishwashers. Always verify your model number.
🔹 What does a dishwasher door gasket do?It seals the dishwasher door to prevent water from leaking during operation.
🔹 What are signs of a bad gasket?Water leaking, cracks, stiffness, or improper sealing are common signs.
🔹 Is installation difficult?No, most installations are simple and require no special tools.
🛒 Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality aftermarket parts. We offer fast shipping, reliable products, and expert support.
✔️ Fast Shipping✔️ Quality Tested Parts✔️ Compatibility Support
WD21X10224 Genuine GE / Hotpoint Dishwasher Interlock Switch
Replaces Part Numbers:AP3872949, 1168295, AH1021382, EA1021382, PS1021382
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WD19X25278 Dishwasher Genuine OEM Diverter Assembly
Replaces Part Numbers: WD19X25278, WD18X21678, 4922277, WD00X25260, AP6871922, PS12710077.
Description: This Diverter Valve Assembly Kit serves a Genuine OEM replacement Part for specific GE dishwasher models. Its key function is to provide an alternative passage for water to reach the upper spray arms of the dishwasher. A faulty or damaged diverter valve often manifests as water leaks within the dishwasher. When such leaks occur and can be traced back to the diverter valve, this assembly kit offers a comprehensive solution. It includes all necessary components and fasteners to efficiently replace the valve. This kit is suitable for use with specific General Electric dishwasher models.
3405-001117 Genuine OEM Refrigerator Dispenser Control Switch - Compatible with Samsung
Product Description
Restore your refrigerator’s dispenser functionality with the 3405-001117 Genuine OEM Refrigerator Dispenser Control Switch. This Samsung-manufactured microswitch is designed for select Samsung refrigerators, controlling the activation of the water and ice dispenser mechanism. It ensures reliable dispensing, addressing issues like unresponsive or intermittent water/ice dispensing for a seamless user experience.
Note: Includes (1) dispenser control microswitch. Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: 3405-001117, DA34-00011A, 110634, 3727507, PD00033242, EAP11712663, AP5962465, PS11712663.
Compatibility:
Compatible with select Samsung refrigerator models, including but not limited to:
Samsung: RS2530BBP, RS2530BSH, RS2530BWP, RS2555BB, RS2555SL, RS2555SW, RS2577BB, RS2577SL, RS2577SW, RS2630SH, RS2630WW, RS265LABP, RS265LAWP, RS277ACBP, RS277ACPN, RS277ACWP
Common models: Samsung RS253BABB, RS253BAVQ, RS255BABB, RS255BASB, RS257BARB
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung refrigerators with water and ice dispensers.
🔧 Specifications: Genuine OEM Samsung microswitch, single-pole, double-throw (SPDT), 0.1A, 125/250V.
💪 Reliable Performance: Ensures precise activation of the water and ice dispenser mechanism.
🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves unresponsive or intermittent water/ice dispensing issues.
Product Specification
Part Number: 3405-001117
Component Type: Refrigerator dispenser control switch
Material: Durable plastic housing with metal contacts
Operating Conditions: 0.1A, 125/250V, suitable for refrigerator dispenser environments
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator’s dispenser working smoothly today!
Add to cart now for a reliable fix!
XPARTCO W11612326 Dishwasher Circulation Pump (OE)
OE-style dishwasher circulation pump designed to move water through the spray arms and restore proper dishwasher wash performance.
✓ Dishwasher Repair Part ✓ Replaces W11612326 ✓ Compatibility Support
Product Description
The XPARTCO W11612326 Dishwasher Circulation Pump moves water through the dishwasher spray arms during the wash cycle. A faulty circulation pump can cause poor cleaning, weak water pressure, unusual pump noise, or incomplete wash performance.
Replacing a failed dishwasher circulation pump can help restore proper water circulation and improve dishwashing results.
What is OE ?: “OE” (Original Equipment) parts are built to the same specifications, materials, and performance standards as the original factory parts. They offer identical fit and function to OEM (Original Equipment Manufacturer) components but are typically sold under independent brands like XPARTCO for better affordability.
Quick Answer
If your dishwasher is not cleaning properly, has weak spray arm pressure, or makes unusual pump noise, the W11612326 circulation pump may need replacement.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not cleaning dishes properly
Weak spray arm water pressure
Water not circulating during wash cycle
Unusual circulation pump noise
Poor dishwasher wash performance
Replaces part Number
W11612326, W10879262, W10805386, W11521435, AP7193729, PS16744934, 4460096, AP6027386, AWP45622, AP16744934, PD00080710, PS11759751.
Compatibility
This part fits select Whirlpool, KitchenAid, Maytag, Amana, and compatible dishwasher models using part number W11612326.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Dishwasher circulation pump replacement
Helps restore proper water circulation
Supports spray arm water pressure
Designed for compatible dishwasher models
“OE” (Original Equipment) parts are built to the same specifications, materials, and performance standards as the original factory parts.
Product Specifications
Brand
XPARTCO
Part Type
Dishwasher Circulation Pump
Primary Part Number
W11612326-OE
Compatible Appliance Type
Dishwasher
Condition
New
Installation
Disconnect power and water supply before installation. Inspect hoses, seals, and wiring connections after installation.
Troubleshooting Guide
⚠️ Disconnect power and water supply before servicing the dishwasher.
Check spray arms and filters for blockage before replacing the pump.
Inspect the circulation pump area for leaks or unusual noise.
Verify wiring connections are secure.
Replace the circulation pump if water circulation problems continue.
When Should You Replace This Part?
Replace the dishwasher circulation pump if the dishwasher has poor cleaning performance, weak spray pressure, unusual pump noise, or water is not circulating during the wash cycle.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ OE-Style Replacement ✓ Compatibility Support ✓ Secure Checkout
W10518394 Genuine OEM Whirlpool Dishwasher Heating Element
The W10518394 is a Genuine OEM Whirlpool replacement dishwasher heating element compatible with select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore Whirlpool-built dishwashers — including the WDF, WDT, ADB, and related series. The heating element is mounted at the bottom of the dishwasher tub and serves two purposes: it heats the wash water to the temperature required by the selected cycle (improving cleaning performance and helping detergent dissolve and work effectively), and it provides drying heat at the end of the cycle to evaporate moisture from dishes during the heated dry phase. When the element fails, dishes come out wet, glassware is spotted or cloudy, and wash performance noticeably degrades.
This is an oval-shape element rated 1200W, approximately 15"L x 3"W x 3"H. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the W10518394 directly replaces W10518394VP, W10134009, W10441445, 8194250, 8563007, 8563464, 8572861, 2977737, 1381534, 8268559, A3-06, AP4325066, AP5690151, EAP9605070, PD00012075, PS1960583, and PS9605070. The element mounts to the bottom of the tub with large nuts on the underside — the rubber washer (Whirlpool 717273) and heater nut (Whirlpool 8268548) are sold separately if they need replacement. Important: after installation on most Whirlpool dishwashers, you must run the diagnostic mode to reset the control board to recognize the new element. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The W10518394 Genuine OEM Whirlpool Dishwasher Heating Element fixes Whirlpool, Maytag, KitchenAid, Amana, and Kenmore dishwashers where dishes come out wet, glassware is spotted, wash water isn't getting hot, or the heated dry phase isn't working. Oval shape, 1200W, ~15"L x 3"W x 3"H. Genuine OEM. Replaces W10518394VP, W10134009, W10441445, 8194250, 8563007, 8563464, 8572861, 2977737, AP4325066, AP5690151, PS1960583, PS9605070. Diagnostic reset required on most Whirlpool dishwashers after installation. Rubber washer (717273) and heater nut (8268548) sold separately if needed.
Common Problems This Part Fixes
Dishes coming out wet at the end of the cycle — element not providing heat for the drying phase
Wash water not getting hot enough — poor cleaning performance even with proper detergent
Glassware coming out cloudy or spotted — water not reaching temperature for proper detergent activation
Heated dry cycle not working — no warm air at the end of the cycle
Element visibly burned through, broken, or showing arcing damage
Multimeter continuity test on the element shows an open circuit (no continuity)
Heating element showing the wrong region glowing red (only a 6" segment heating rather than the whole element)
Detergent not fully dissolving — water too cool to activate the formulation
Replaces Part Numbers
This dishwasher heating element directly replaces the following OEM and cross-reference part numbers:
W10518394, 2977737, 8194250, 8563007, 8572861, W10134009, W10441445, W10518394VP, AWP40983, PD00004893, EAP8260087, AP5690151, PS8260087.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Always confirm the shape and dimensions of your old element match this oval ~15" element before ordering — some Whirlpool dishwashers use a different horseshoe-style element instead.
Compatibility
This dishwasher heating element is compatible with select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore dishwashers, including:
Whirlpool dishwashers — WDF330PAHS, WDF520PADM, WDT720PADM, WDT730PAHZ series and related models
Whirlpool dishwashers — additional WDF and WDT series models (verify with parts diagram)
Maytag dishwashers — select models (verify with parts diagram)
KitchenAid dishwashers — select models
Amana dishwashers — ADB1400AGW and related models
Kenmore / Sears dishwashers — select Whirlpool-built models
Important — Confirm Element Shape Before Ordering: The W10518394 is an oval-shape heating element approximately 15" in length. Some Whirlpool-platform dishwashers use a different horseshoe-style heating element instead, which is NOT interchangeable with this one. Before ordering, visually compare your old element's shape and length to this part, or check your dishwasher's parts diagram to confirm W10518394 is the correct element for your specific model. If your element is horseshoe-shaped, you need a different part number — contact our support team with your model number.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Heats wash water for optimal cleaning performance and provides drying heat during the heated dry phase
Rated 1200W for efficient heating and reliable temperature control
Oval-shape element approximately 15" L x 3" W x 3" H
Mounts in the bottom of the dishwasher tub, secured underneath with large nuts
Note: rubber washer (Whirlpool 717273) and heater nut (Whirlpool 8268548) sold separately if yours need replacement
Diagnostic reset required on most Whirlpool dishwashers after installation (typically pressing any 3 buttons in sequence 3 times)
Replaces 18+ OEM and cross-reference part numbers including W10518394VP, W10134009, W10441445, 8194250, 8563007, 8563464, 8572861, AP4325066, AP5690151, PS1960583, PS9605070
Compatible with Whirlpool WDF and WDT series, Maytag, KitchenAid, Amana ADB1400AGW, and Kenmore Whirlpool-built dishwashers
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
W10518394
Part Type
Dishwasher Heating Element
Condition
Genuine OEM
Application
Dishwashers (Whirlpool platform)
Shape
Oval (NOT interchangeable with horseshoe-style elements)
Wattage
1200W
Dimensions
Approximately 15" L x 3" W x 3" H
Mounting Location
Bottom of dishwasher tub
Related Parts (Sold Separately)
Rubber Washer (717273), Heater Nut (8268548)
Post-Install Step
Diagnostic reset required on most Whirlpool dishwashers
Compatible Brands
Whirlpool, Maytag, KitchenAid, Amana, Kenmore
Installation Notes
⚠️ Unplug Dishwasher and Shut Off Water Before Starting — Don't Touch Element with Bare Hands Disconnect power at the breaker and shut off the water supply at the valve under the sink before beginning. Wear work gloves and safety glasses to protect your hands and eyes. Handle the new heating element only by the metal end terminals or its support brackets — do NOT touch the heating coil itself with bare fingers; skin oils can cause hot spots that shorten element life. From inside the dishwasher tub, the element is visible at the bottom — it's the looped metal coil running along the floor of the tub. Remove the bottom rack and any debris to clear access. To access the wire connections and mounting nuts, you'll need to either reach underneath the dishwasher from the front access panel or, on some installations, pull the dishwasher out partially. From underneath: disconnect the two wires from the bottom of the element terminals (photograph the wire connections first to ensure correct reinstallation). Remove the plastic nuts holding the element terminals in place. From inside the tub, lift the old element straight up and out. Inspect the rubber washers — if they're cracked, hardened, or torn, replace them now with new 717273 washers. Install the new W10518394 element through the same mounting holes, replace the rubber washers if needed, and secure with the plastic nuts (or new 8268548 nuts) from underneath. Reconnect the two wires to the terminals matching your original orientation. Important: after restoring power, run the Whirlpool diagnostic mode to reset the control board — on most models this is done by pressing any three buttons in sequence three times and closing the door, which initiates a ~30-minute diagnostic cycle. The new element will not be recognized by the control until this is done. Tools needed: Phillips screwdriver, 5/8" wrench, 5/16" nut driver, 3/4" wrench, work gloves, safety glasses.
Frequently Asked Questions
Why are my dishes coming out wet — is the heating element the cause?
Most likely, yes — wet dishes are the classic signature of a failed dishwasher heating element. The element provides heat for the dry phase, evaporating moisture from dish surfaces. When it fails, dishes simply air-dry, which leaves them wet (especially plastics and the interior of inverted glassware). To confirm: with the dishwasher unplugged, disconnect the wires from the element and check continuity with a multimeter. A working element shows continuity; a failed element shows an open circuit (infinite resistance). Also check that you have the heated dry option enabled in your cycle settings — some users mistakenly turn off heated dry and then assume the element has failed.
After installing the new element, the dishwasher still isn't heating — why?
On most Whirlpool dishwashers, you must run the diagnostic mode after replacing the heating element so the control board recognizes the new part. To enter diagnostic mode on most Whirlpool models, press any three buttons in sequence three times rapidly, then close the door — this starts a roughly 30-minute diagnostic cycle that resets the heater logic. If you've installed the new element correctly and it still isn't heating after the diagnostic cycle, also check the high-limit thermostat (a safety component that can stop power to the element if it has failed open). Confirm your wire connections are tight on the element terminals as well.
How is the W10518394 different from horseshoe-shape heating elements?
The W10518394 is an oval-shape element about 15" in length. Some Whirlpool-platform dishwashers — even similar-looking models — use a horseshoe-shape element instead, which has a different mounting hole pattern and shape that won't fit positions designed for the oval element. The two are NOT interchangeable. Before ordering, compare your old element to a photo of the W10518394, or check your dishwasher's parts diagram. If your old element is horseshoe-shaped, contact our support team with your model number and we'll help identify the correct horseshoe-style element for your dishwasher.
Do I need to replace the rubber washers and nuts when installing this?
Not always — they're reusable as long as they're in good condition. Inspect the rubber washers (Whirlpool 717273) for cracks, hardening, or tears. If they're brittle or torn, replace them now while you have the element out — they prevent water leaks from the tub at the element mounting points. The plastic heater nuts (Whirlpool 8268548) are usually reusable unless visibly damaged. Both parts are sold separately if you need replacements. Reusing torn rubber washers is the most common cause of leaks after this repair, so don't skip the inspection.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same heating element installed in compatible Whirlpool, Maytag, KitchenAid, Amana, and Kenmore Whirlpool-built dishwashers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WD26X23258 Dishwasher Genuine Circulation Pump
Genuine dishwasher circulation pump designed to move water through the spray arms and restore proper wash performance.
✓ Genuine Part ✓ Replaces WD26X23258 ✓ Compatibility Support
Product Description
This Pump is a Genuine component for specific GE dishwasher models. It refers to the water pump component that circulates water throughout the dishwasher during cycles. Common cause of a faulty pump can include normal wear over many uses. The continuous motor operation puts strain on internal seals and impellers. Mineral deposits from hard water can also clog pump parts over time.
Replacing a faulty circulation pump can help restore proper water movement and improve dishwasher cleaning performance.
Quick Answer
If your dishwasher is not washing properly, has weak spray pressure, or makes unusual pump noise, the WD26X23258 circulation pump may need replacement.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not cleaning dishes properly
Weak spray arm water pressure
Circulation pump noise
Water not circulating during wash cycle
Poor wash performance
Replaces part Number
WD26X23258, 4466766, WD26X22285, WD26X22518, WD26X22826, AGE25293, AP6039424, EAP11772000, PD00041691, PS11772000.
Compatibility
This part fits select GE, Hotpoint, Kenmore, and compatible dishwasher models using part number WD26X23258.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Genuine dishwasher circulation pump
Helps restore proper water circulation
Supports spray arm water pressure
Designed for compatible dishwasher models
Reliable replacement component
Product Specifications
Brand
GE
Part Type
Dishwasher Circulation Pump
Primary Part Number
WD26X23258
Compatible Appliance Type
Dishwasher
Condition
Genuine New
Installation
Disconnect power and water supply before installation. Inspect hoses and seals for leaks after installation.
Troubleshooting Guide
⚠️ Disconnect power and water supply before servicing the dishwasher.
Check spray arms for blockage before replacing the pump.
Inspect pump area for leaks or unusual noise.
Verify wiring connections are secure.
Replace the circulation pump if water circulation problems continue.
When Should You Replace This Part?
Replace the dishwasher circulation pump if the dishwasher has poor cleaning performance, weak spray pressure, unusual pump noise, or water is not circulating during the wash cycle.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Genuine Parts ✓ Compatibility Support ✓ Secure Checkout
