3W40025L Genuine LG OEM Dishwasher Micro Switch – Compatible with LG Dishwashers
Product Description
Restore proper operation to your dishwasher with the 3W40025L Genuine LG OEM Dishwasher Micro Switch. This small but essential component detects door position or button activations, ensuring cycles start and stop correctly. A failed micro switch can cause the dishwasher not to run, stop mid-cycle, or display error codes. Replacing it with this genuine LG part restores dependable performance and safety.
Replaces Part Numbers
3W40025L, D3V-16G-1C25, PD00035953, EAP5574491, AP5650845 PS5574491.
Compatibility
This micro switch is compatible with select LG dishwashers.
Example compatible models include (but are not limited to): LG LDF7774ST, LDF8764ST, and LDF6810ST.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 OEM Replacement – Genuine LG part for reliable performance
🔒 Cycle Safety – Ensures proper door detection and cycle control
💰 Cost-Effective OEM Part – Built to last with factory-tested quality
🛠️ Easy to Install – Small component, quick replacement with basic tools
🛡️ Fixes Common Issues – Resolves dishwashers not starting, stopping mid-cycle, or showing error codes
📐 Product Specification
Part Number: 3W40025L
Component Type: Dishwasher Micro Switch, 16A 125/250VAC
Material: High-durability plastic housing with electrical contacts
Mounting: Direct replacement switch with snap-in or screw mount
Operating Conditions: Designed for standard dishwasher use
Compliance: Genuine LG OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers
⚠️ Safety First: Always disconnect the dishwasher from power before starting repairs.
Steps:
Disconnect power supply to dishwasher.
Access control panel or door latch assembly (depending on model).
Locate and remove the faulty micro switch.
Install the new 3W40025L switch and reconnect wiring.
Reassemble the control panel or door latch assembly.
Restore power and test dishwasher operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your dishwasher running properly again — Add to Cart Now for a genuine, factory-approved fix!
A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor
The A00126401 is a genuine Frigidaire OEM drain pump motor assembly for Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers. At the end of each wash cycle, this pump is what actually pushes the used wash water out of the tub and through the drain hose, clearing the way for the next fill. An internal impeller spins to create that flow, drawing water in and forcing it out through the drain line.
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM, with 1/4" male terminals, this assembly includes the pump motor, impeller, and seal. Common causes of failure include clogs from food particles or debris interfering with the impeller, worn or damaged impeller blades, and electrical failure of the motor itself. A failing drain pump typically shows up as water not draining from the dishwasher, water pooling at the bottom of the tub after a cycle, a grinding or humming noise from the pump area, or the dishwasher refusing to start a new cycle because it detects standing water left over from the last one. It directly replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535.
Quick Answer
The A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers that won't drain, pool water at the bottom of the tub, make grinding or humming noises, or won't start a new cycle due to leftover water. 120V, 60Hz, 35W, 0.8A, 3600RPM. Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, EAP2363535. Before replacing the pump, check the drain hose and sump screen for a simple clog — one customer replaced the pump, still had no drainage, and found a clogged drain hose was the actual cause.
Common Problems This Part Fixes
Dishwasher won't drain at the end of the cycle
Water pooling at the bottom of the tub after a completed cycle
Grinding or humming noise coming from the pump area
Dishwasher won't start a new cycle because it detects leftover water from the previous one
Dishes not getting properly cleaned due to poor water circulation
Pump running but producing little or no actual drainage
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
A00126401, 154736201, 3015405, 5304492415, PD00000922, EAP2363535, AFR20557, AP5690431, PS8689824
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Frigidaire dishwashers, and also fits select Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore/Sears dishwashers built on the same platform.
Note: This assembly includes the pump motor, impeller, and seal. Whether a check valve flapper is included can vary by supplier batch — inspect your old pump's flapper condition before assuming one is included, and contact our support team if you need to confirm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified motor speed and impeller design
Pumps water out of the tub and through the drain hose at the end of each cycle
Resolves "won't drain," "water pooling," "grinding or humming noise," and "won't start due to leftover water" symptoms caused by pump failure
Includes pump motor, impeller, and seal
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM
1/4" male terminals for a direct plug-in electrical fit
Direct drop-in replacement — no modification required
Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535
Compatible with Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
A00126401
Part Type
Dishwasher Drain Pump Motor Assembly
Condition
Genuine OEM
Brand
Frigidaire
Voltage
120V
Frequency
60 Hz
Wattage
35 W
Amperage
0.8 A
Motor Speed
3600 RPM
Terminals
1/4" male
Kit Contents
Pump motor, impeller, seal
Dimensions
Approx. 3-1/4"L x 2-1/2"W x 3-3/4"H
Color
White / Green
Repair Difficulty
Easy to Moderate — under an hour
Quantity
1 drain pump motor assembly
Compatible Brands
Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, Kenmore
Installation Notes
⚠️ Unplug Dishwasher Before Starting — Rule Out A Simple Clog First Before replacing the pump, check the drain hose and the sump screen at the bottom of the tub for a clog — food debris and buildup in the hose can produce identical "won't drain" symptoms to a failed pump, and clearing a clog costs nothing but a few minutes. One customer replaced the pump entirely, still had no drainage, and only afterward discovered the actual cause was a clogged drain hose; disconnecting and running a cycle without the hose attached can help confirm whether the pump itself is pushing water. Once you've confirmed the pump needs replacing, disconnect power at the outlet or shut off the circuit breaker, and pull the dishwasher out from under the counter for access to the underside — removing the two screws securing it to the counter first. Have a drain pan or towels ready for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the two wire connectors from the old pump, remove the three screws securing it in place, and disconnect the hose connections, then pull the old pump free. Install the new A00126401 in the same position, reconnect the hose connections, and reconnect the two wire connectors. Secure the pump with its three mounting screws. Slide the dishwasher back into place and secure it to the counter, restore power, and run a full test cycle to confirm normal draining with no leaks or unusual noise. Tools needed: Phillips screwdriver, flat-blade screwdriver, needle-nose pliers, drain pan, work gloves.
Frequently Asked Questions
My dishwasher won't drain. How do I know if it's actually the pump and not something simpler?
Check the drain hose and the sump screen at the bottom of the tub for a clog first — this is a genuinely common cause of "won't drain" symptoms and costs nothing to rule out. If the hose and screen are clear and the pump still won't run, test the pump motor with a multimeter for continuity. If there's no continuity, or the pump is getting power but still won't run, replacement is the correct fix.
I already replaced the pump and it's still not draining. What should I check next?
This has happened to real customers, and the cause was ultimately a clogged drain hose rather than the pump itself. If replacing the pump didn't solve the drainage problem, disconnect the drain hose and run a test cycle to see whether water is being pushed out at all — if it is, the hose downstream is the likely culprit and worth snaking out or replacing.
Does this kit include the check valve flapper?
This varies by supplier batch — this assembly reliably includes the pump motor, impeller, and seal, but flapper inclusion isn't consistent across all sources. Inspect your old pump's flapper for wear or damage before installation, and contact our support team if you need to confirm whether a flapper is included with your specific order.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original motor speed, impeller design, and terminal configuration of the drain pump originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WD21X10519 Dishwasher Flood Switch – Compatible with GE, Hotpoint, and RCA Dishwashers
Product Description
Prevent overfilling and protect your dishwasher from water damage with the XPARTCO WD21X10519 Dishwasher Flood Switch. This Flood Switch Assembly is a replacement part compatible with GE dishwashers. The dishwasher flood switch and thermistor assembly is responsible for detecting and preventing water from overflowing the dishwasher. It is located at the base of the tub and detects when water is present in the base from a leak, preventing the water inlet valve from filling further. The thermistor shuts off the water flow from the valve if the incoming water temperature is outside of the acceptable range.
Replaces Part Numbers
WD21X10519, 3028650, WD21X10492, WD21X20204, PD00023214, EAP8690623, AP5781465, PS8690623.
Compatibility
This replacement flood switch fits select GE, Hotpoint, and RCA dishwashers.
Example compatible models include (but are not limited to): GE GSD2100V65BB, GDF520PGJ2WW, Hotpoint HDA3600H35BB, and RCA RBD3300G00BB.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to meet OEM performance and safety standards
💧 Prevents Overfilling – Accurately detects water level and stops excessive filling
💰 Budget-Friendly Alternative – Provides OEM-like reliability at a lower cost
🛠️ Quick & Easy Installation – Simple wiring connection for fast repair
🛡️ Fixes Common Issues – Solves leaking, overfilling, or dishwasher not filling problems
📐 Product Specification
Part Number: WD21X10519
Component Type: Dishwasher flood Switch
Material: Plastic flood housing with integrated electrical microswitch
Mounting: Direct-fit installation beneath dishwasher tub
Function: Monitors water level and signals control board
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, pliers (optional)
⚠️ Safety First: Always unplug the dishwasher or turn off its circuit breaker before servicing.
Steps:
Disconnect power to the dishwasher.
Remove the toe-kick panel to access the flood switch area.
Disconnect the wiring connector from the old switch.
Twist or unclip the old flood switch and remove it.
Install the new XPARTCO WD21X10519 switch in the same position.
Reconnect wiring, reinstall toe-kick panel, and restore power.
Run a quick fill test to confirm proper operation.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your dishwasher from overfilling — Add to Cart Now for a reliable, cost-effective repair!
(2 Pack) WD01X21740 Dishwasher Mounting Bracket - Compatible with GE, Hotpoint, RCA
Product Description
Secure your dishwasher with the XPARTCO WD01X21740 Dishwasher Mounting Bracket. This high-quality replacement part is designed for select GE, Hotpoint, RCA, and other compatible dishwashers, ensuring a stable connection to the countertop or cabinet to prevent tipping during loading or unloading. Made of durable galvanized iron, it matches OEM standards for fit and performance, addressing issues like loose or wobbly dishwashers.
Note: Includes one mounting bracket. Disconnect power before installation. Two brackets are typically required per dishwasher.
Replaces part numbers: WD01X21740, WD01X10598, 4179435, PD00026672, EAP11700868, AP5981620, PS11700868.
Compatibility:
Compatible with models including but not limited to:
GE: ADT521PGFOBS, CDT725SSFOSS, CDT765SSF1SS, CDT765SSFOSS, GDF510PGD0BB, GDF510PGD0WW, GDF510PGJ0BB, GDF510PGJ0WW, GDF510PGM0BB, GDF510PGM0WW, GDF510PSD0SS, GDF510PSJ0SS, GDF510PSM0SS, GDF520PGD0BB, GDF520PGD0CC, GDF520PGD0WW, GDF520PGJ0BB, GDF520PGJ0CC, GDF520PGJ0WW, GDF520PSF0SS, GDF520PSJ0SS, GDF540HGD0BB, GDF540HGD0WW, GDF540HGJ0BB, GDF540HGJ0WW, GDF540HSD0SS, GDF540HSJ0SS, GDF570SGD0BB, GDF570SGF0BB, GDF570SGF0CC, GDF570SGF0WW, GDF570SGJ0BB, GDF570SGJ0CC, GDF570SGJ0WW, GDF570SSF0SS, GDF570SSJ0SS, GDT530PGD0BB, GDT530PGD0WW, GDT530PSD0SS, GDT535PGJ0BB, GDT535PGJ0WW, GDT535PSJ0SS, GDT545PGJ0BB, GDT545PGJ0WW, GDT545PSJ0SS, GDT550HGD0BB, GDT550HGD0WW, GDT550HSD0SS
Hotpoint, RCA: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and other compatible dishwashers.
🔐 Specifications: High-quality galvanized iron mounting bracket.
💪 Reliable Performance: Durable construction ensures stable dishwasher mounting and long-lasting use.
🛠️ Easy Installation: Requires screwdriver; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Prevents dishwasher tipping, resolves loose or wobbly installations.
Product Specification
Part Number: XPARTCO WD01X21740
Component Type: Dishwasher mounting bracket
Material: Galvanized iron
Mounting: Screw-mounted to countertop or cabinet
Operating Conditions: Suitable for household dishwasher environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher secure today!
Add to cart now for a reliable fix!
5304517587 Dishwasher Switch Assembly
Description: The Switch Assembly is an OEM replacement part for specific Frigidaire dishwasher models. It contains a touchpad and electronic controls that operate wash cycles and drying features.
Replaces Part Numbers:5304517587, 4840235, AP6802340, PS12585690.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WPW10352973 Washer Genuine Dispenser Actuator
Dispenser Drawer Switch Actuator for Washer
Replaces Part Numbers: WPW10352973, W10352973, W10065190, W10163975, W10283468, 8183186, AP6020256, PS11753574.
✅ Product Description:
Restore proper detergent dispensing with this genuine OEM WPW10352973 washer dispenser actuator. Designed to control the flow of detergent and fabric softener into your wash cycle, this part is a direct replacement for worn or non-functioning actuators in many Whirlpool, Maytag, Amana, Kenmore, and Crosley top-load washing machines.
Part Features:
Genuine OEM quality – built to factory specs
Replaces part numbers: WPW10352973, W10352973, W10065190, W10163975, W10283468, 8183186, AP6020256, PS11753574.
Controls dispenser drawer movement for proper release timing
Easy to install with basic tools
Fixes the following symptoms:
Dispenser drawer not opening
Detergent or softener not dispensing
Error codes related to actuator failure
Inconsistent or incomplete wash cycles
Compatible with:Many models from Whirlpool, Maytag, Kenmore, Amana, and more.(Check model number before ordering or contact us for fitment help.)
✅ Why Buy from Parts-O-Matic?
Guaranteed OEM-quality parts
Always Fast and Free U.S. shipping
Competitive pricing
Expert support for part compatibility
🛒 Get your washer working like new – order the WPW10352973 Dispenser Actuator now at Parts-O-Matic.com, and enjoy fast, free shipping with no minimum.
WD24X10018 Dishwasher Genuine Piston & Nut Assembly
Replaces Part Numbers: WD24X10018, 821081, WD22X0133, WD22X133, WD24X0199, WD24X0220, WD24X199, WD24X220, AH260690, EA260690, AP2617344, PS260690.
Description: This Piston & Nut Assembly is a Genuine parts for specific GE dishwasher models. It plays a critical role in the dishwasher’s water management system, helping to control water flow and ensuring proper drainage during the wash cycle. You should replace this piston & nut assembly if it becomes worn out or damaged. Common causes of a bad piston & nut assembly can include mineral buildup from hard water, general wear and tear from regular use, or physical damage due to debris or foreign objects in the dishwasher.
XPARTCO WD01X21740 Dishwasher Mounting Bracket - Compatible with GE, Hotpoint, RCA
Product Description
Secure your dishwasher with the XPARTCO WD01X21740 Dishwasher Mounting Bracket. This high-quality replacement part is designed for select GE, Hotpoint, RCA, and other compatible dishwashers, ensuring a stable connection to the countertop or cabinet to prevent tipping during loading or unloading. Made of durable galvanized iron, it matches OEM standards for fit and performance, addressing issues like loose or wobbly dishwashers.
Note: Includes one mounting bracket. Disconnect power before installation. Two brackets are typically required per dishwasher.
Replaces part numbers: WD01X21740, WD01X10598, 4179435, PD00026672, EAP11700868, AP5981620, PS11700868.
Compatibility:
Compatible with models including but not limited to:
GE: ADT521PGFOBS, CDT725SSFOSS, CDT765SSF1SS, CDT765SSFOSS, GDF510PGD0BB, GDF510PGD0WW, GDF510PGJ0BB, GDF510PGJ0WW, GDF510PGM0BB, GDF510PGM0WW, GDF510PSD0SS, GDF510PSJ0SS, GDF510PSM0SS, GDF520PGD0BB, GDF520PGD0CC, GDF520PGD0WW, GDF520PGJ0BB, GDF520PGJ0CC, GDF520PGJ0WW, GDF520PSF0SS, GDF520PSJ0SS, GDF540HGD0BB, GDF540HGD0WW, GDF540HGJ0BB, GDF540HGJ0WW, GDF540HSD0SS, GDF540HSJ0SS, GDF570SGD0BB, GDF570SGF0BB, GDF570SGF0CC, GDF570SGF0WW, GDF570SGJ0BB, GDF570SGJ0CC, GDF570SGJ0WW, GDF570SSF0SS, GDF570SSJ0SS, GDT530PGD0BB, GDT530PGD0WW, GDT530PSD0SS, GDT535PGJ0BB, GDT535PGJ0WW, GDT535PSJ0SS, GDT545PGJ0BB, GDT545PGJ0WW, GDT545PSJ0SS, GDT550HGD0BB, GDT550HGD0WW, GDT550HSD0SS
Hotpoint, RCA: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and other compatible dishwashers.
🔐 Specifications: High-quality galvanized iron mounting bracket.
💪 Reliable Performance: Durable construction ensures stable dishwasher mounting and long-lasting use.
🛠️ Easy Installation: Requires screwdriver; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Prevents dishwasher tipping, resolves loose or wobbly installations.
Product Specification
Part Number: XPARTCO WD01X21740
Component Type: Dishwasher mounting bracket
Material: Galvanized iron
Mounting: Screw-mounted to countertop or cabinet
Operating Conditions: Suitable for household dishwasher environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher secure today!
Add to cart now for a reliable fix!
🚰 DD82-01588A Dishwasher Water Inlet Valve – Genuine OEM Samsung Part
🔁 Replaces These Part Numbers
DD82-01588A (primary OEM)
Also Replaces PS12593084, AP6807545, DD81-02265A, AP6244375, PS12085633.
Description: This Dishwasher Water Inlet Valve Assembly is essential for regulating the water flow into dishwasher, ensuring optimal cleaning performance. This replacement Genuine OEM part is engineered to provide precise water control, preventing leaks and maintaining efficient operation.
✅ Key Features
Genuine Samsung OEM part – DD82-01588A
Precision-engineered to match factory standards
Controls cold water intake with accurate timing and pressure
Easy to install using standard tools
Tested for leak-free performance
🔧 Fixes Common Symptoms
Dishwasher won’t fill or fills slowly
Error codes related to water inlet
No water intake at cycle start
Valve leaks or hums without water flow
🚚 Why Buy from Parts‑O‑Matic?
✅ Genuine OEM quality — not a knock‑off
✅ Always Fast and Free U.S. shipping
✅ Expert customer support for part fitment
✅ Trusted by DIYers and appliance professionals
🛒 Restore proper water fill and cycle reliability — order your DD82-01588A OEM water inlet valve today from Parts‑O‑Matic and enjoy speedy, free delivery.
DC62-30314L Dishwasher Water Valve - Compatible with Samsung Dishwashers
Product Description
Ensure your dishwasher operates efficiently with the replacement DC62-30314L Dishwasher Water Valve. This high-quality replacement water inlet valve, designed for Samsung dishwashers, regulates water flow to ensure proper filling during wash cycles. Constructed from durable plastic and metal, this single-coil valve addresses issues like no water entering, continuous filling, leaks, or abnormal noises.
Note: Includes one water inlet valve. Shut off water supply and unplug the dishwasher before installation.
Replaces part numbers: DC62-30314L, 3992459, 33290415, PD00041597, EAP4208749, AP5582579, PS4209101, EAP4209101.
Compatibility:
Compatible with models including but not limited to:
Samsung: DW80H9970US/AA, DW80J7550UG/AA, DW80K5050UB/AA, DW80K5050UG/AA, DW80K5050US/AA, DW80K5050UW/AA, DW80K7050UG/AA, DW80R9950QN/AA, DW80R9950UG/AA, DW80R9950US/AA, DW80R9950UT/AA, DW80R5060US/AA, DW80R5061US/AA, DW80J3020UW/AA, DW60M9990AP/AA
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dishwasher models.
🔥 Specifications: replacement water inlet valve, single-coil, plastic and metal construction, 110-120V, 60Hz, 0.75" inlet (GHT), 0.75" outlet (FPT), designed for reliable water flow regulation.
💰 Cost-Effective Alternative: replacement valve offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 20–40 minutes.
🛡️ Reliable Fixes: Resolves no water, continuous filling, leaks, abnormal noises, or improper cleaning.
Installation Notes:
Safety First: Unplug the dishwasher and shut off the water supply before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a budget-friendly fix!
