WE11X203 Dryer Genuine OEM Heater Restring Coil Kit
Dryer heating element restring kit. This kit replaces the existing heating coil in your dryer. This Heater restring Coil Replaces WE11X103 Heater Restring Coil.
The diameter of the coil is 1/2" OD it stretches around the pan over the ceramic insulators.
Replaces Part Numbers:WE11X203, AH265619, AP2620176, DE333, EA265619, K35-408, PS265619, WE11X0203, WE11X103C
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WP8544771 Dryer Genuine OEM Heating Element
The WP8544771 is a genuine Whirlpool OEM heating element assembly for Whirlpool, Maytag, Kenmore, Amana, Crosley, and Inglis electric dryers. This assembly includes the housing with the heating element coil and insulators attached, and is what generates the heat used to dry your clothes throughout the cycle.
Rated 5400 watts, 240 volts. Over time, the coil can burn through at a weak point, causing an open circuit and a complete loss of heat. According to Whirlpool's own guidance, if a dryer stops heating, the heating element may have failed, but it's not actually the most common cause — a blown thermal fuse is more frequently the culprit, so it's worth checking that first. Symptoms of a failed heating element include the dryer running a full cycle with no heat, insufficient heat, or drying times that have gradually gotten longer. It directly replaces 8544771, W10836011, WP8544771VP, 1180054, AP6013115, AWP48654, DE4771, EAP11746337, PAT NO 7154072, PD00002399, PS11746337. As a genuine OEM part, the WP8544771 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The WP8544771 Dryer Genuine OEM Heating Element fixes Whirlpool, Maytag, Kenmore, Amana, Crosley, and Inglis electric dryers with no heat, insufficient heat, or drying times that have gotten longer. 5400W, 240V. Replaces 8544771, W10836011, WP8544771VP, 1180054, AP6013115, AWP48654, DE4771, EAP11746337, PAT NO 7154072, PD00002399, PS11746337. Check the thermal fuse first — per Whirlpool's own guidance, a blown thermal fuse is a more common cause of no-heat than a failed heating element.
Common Problems This Part Fixes
Dryer runs a full cycle but produces no heat at all
Dryer produces some heat, but not enough to dry clothes properly
Drying times that have gradually gotten longer than they used to
Clothes coming out cold or barely warm at the end of a cycle
Visible break or burned-through section in the heating coil
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers:
8544771, W10836011, WP8544771VP, 1180054, AP6013115, AWP48654, DE4771, EAP11746337, PAT NO 7154072, PD00002399, PS11746337
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This heating element is compatible with select Whirlpool electric dryers, and also fits select Maytag, Kenmore, Amana, Crosley, and Inglis dryers built on the Whirlpool platform, including model numbers such as:
WED75HEFW, WED72HEDW, WED70HEBW, WED7590FW, WED9750WL0, WED8540FW0, WED9200SQ0, WED9500TW2, WED8300SW0, WED86HEBW0, WED9151YW0
MED3500FW, MEDB880BW0, MED6000XW1
Kenmore 11087729700, 11087872602, 11068102310, 11087089601
Note: This element is commonly purchased alongside the 280148 thermal cut-off kit (8557403 high-limit thermostat and 8318314 thermal fuse), since these components attach to the heating element assembly and often warrant replacement at the same time. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified coil design and housing
Includes housing, heating coil, and insulators
Resolves "no heat," "insufficient heat," and "drying takes too long" symptoms caused by a burned-through coil
Rated 5400W, 240V
Direct drop-in replacement — no modification required
Replaces 8544771, W10836011, WP8544771VP, 1180054, AP6013115, AWP48654, DE4771, EAP11746337, PAT NO 7154072, PD00002399, PS11746337
Compatible with Whirlpool, Maytag, Kenmore, Amana, Crosley, and Inglis electric dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Typically a 30 to 60 minute DIY repair
Product Specifications
Part Number
WP8544771
Part Type
Dryer Heating Element Assembly
Condition
Genuine OEM
Wattage
5400 W
Voltage
240V
Includes
Housing, heating coil, insulators
Dimensions
Approx. 14.1" x 6.3" x 2.3"
Related Part
280148 thermal cut-off kit (8557403 thermostat + 8318314 fuse, sold separately)
Repair Difficulty
Easy to Moderate — 30 to 60 minutes
Quantity
1 heating element assembly
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis
Installation Notes
⚠️ Unplug Dryer Before Starting — A 1/4" Dowel Or Rod Helps Release The Rear Clip Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. On many models, the heating element assembly can be removed from the front after removing the bottom "toe" panel. There's also a clip at the back of the assembly where it connects to the warm air duct leading into the dryer drum — this clip can be released from the front using a piece of 1/4" dowel or rod, which saves you from having to remove the back cover separately. Photograph the wiring before disconnecting anything. Disconnect the wire terminals from the old element, release the rear clip, and pull the assembly free. Since the thermal fuse and high-limit thermostat typically attach directly to this heating element assembly, this is a good opportunity to inspect or replace them at the same time, even if they're still technically working, since they share the same duty cycle and stress. Install the new 8544771 in the same position, reconnect the wire terminals, and re-engage the rear clip. Reassemble the toe panel or back cover. Restore power and run a test cycle to confirm the dryer is heating normally. Tools needed: Phillips screwdriver, 1/4" nut driver, 1/4" dowel or rod, work gloves.
Frequently Asked Questions
My dryer isn't heating. Should I replace the heating element first?
Not necessarily as your first step. Per Whirlpool's own guidance, while a failed heating element can cause a no-heat symptom, it's not actually the most common cause — a blown thermal fuse is more frequently the reason a dryer stops heating. It's worth checking the thermal fuse first, since it's a simpler and less expensive part to test and replace.
Is there an easier way to release the rear clip without removing the back cover?
Yes. One customer found that the clip at the back of the heating element assembly, where it connects to the warm air duct, can be released from the front of the dryer using a piece of 1/4" dowel or rod, avoiding the need to remove the back cover separately. They only discovered this after already taking the back cover off, so it's worth trying this approach first.
Should I replace the thermal fuse and thermostat while I'm in there?
It's worth considering. Since the thermal cut-off fuse and high-limit thermostat typically attach directly to the heating element assembly, one customer chose to replace both at the same time as the element, even though they were still technically working, simply because they were already accessible during the same repair. Our 280148 kit bundles the matching 8557403 thermostat and 8318314 fuse for this exact purpose.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original coil design, wattage, and housing configuration of the heating element assembly originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 279838 Dryer Heating Element
The XPARTCO 279838 is an aftermarket replacement heating element for Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Crosley, Admiral, Inglis, KitchenAid, and Jenn-Air electric dryers. This element is the source of virtually all the heat in the dryer: current flows through a nickel-chromium coil, which glows and radiates heat as the blower pushes air across it and into the drum. This part is often nicknamed the "shorty" because of its compact size compared to the larger, older Whirlpool element it replaced, part number 4391960 — the shorty design is used on dryers with the lint filter positioned on the top right near the control housing.
Over years of use, the coil typically fails with a visible break somewhere along its length — a section simply burns through and the circuit opens, cutting off heat entirely. A quick way to check: a healthy element reads approximately 9 to 10 ohms across its terminals with a multimeter; a reading of no resistance (open circuit) confirms the element has failed. This element shares the same dryer platform as our WP3392519 thermal fuse and works alongside a cycling thermostat and high-limit thermostat in the same heating circuit — all commonly checked or replaced together when a dryer stops heating. It directly replaces 279837, WP279837, 2438, 279838VP, 279838A, 3398063, 3398064, 3403585, 8565582, W10724237, AP3094254, AH334313, EA334313, PS334313, and PS3343130.
Quick Answer
The XPARTCO 279838 Dryer Heating Element fixes Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Crosley, Admiral, Inglis, KitchenAid, and Jenn-Air electric dryers with no heat, insufficient heat, or drying times that have gotten noticeably longer. Also called the "shorty" element. Replaces 279837, WP279837, 2438, 279838VP, 279838A, 3398063, 3398064, 3403585, 8565582, W10724237, AP3094254, AH334313, EA334313, PS334313, PS3343130. A healthy element reads approximately 9-10 ohms with a multimeter; if the dryer has no heat at all, also check the thermal fuse (such as our WP3392519 listing) before assuming the element is at fault — a blown fuse produces the identical symptom.
Common Problems This Part Fixes
Dryer runs a full cycle but produces no heat at all
Dryer produces some heat, but not enough to dry clothes properly
Drying times that have gotten noticeably longer than they used to
Clothes coming out cold or barely warm at the end of a cycle
Visible break or burned-through section in the heating coil
Element that reads no resistance (open circuit) on a multimeter continuity or ohms test
Dryer that heats inconsistently, cycling on and off unexpectedly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers:
279838, WP279837, 279837, 2438, 279838A, 279838VP, 3398063, 3398064, 3403585, 8565582, W10724237, AH334313, AP3094254, AWP39215, PD00002351, EA334313, OEM9282771, PS334313.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This heating element is compatible with select Whirlpool electric dryers, and also fits select Kenmore, Maytag, Amana, Roper, Estate, Crosley, Admiral, Inglis, KitchenAid, and Jenn-Air dryers built on the same platform, including model numbers such as:
LER5624DQ0, LER4634EQ2
NED4655EW, NED4600YQ1
WED4815EW, WED4800BQ1, WED49STBW1, WED8300SW0
MEDC465HW, MEDC215EW, MEDX655DW, MEDX655DW1
RED4640YQ1, AED4675YQ1, AED4475TQ1
EED4400WQ0
Kenmore 70, 80, 90, 300, 400, 500, and 600 Series Model 110
Note: This element fits Whirlpool-platform dryers with the lint filter positioned on the top right near the control housing. It is a compact "shorty" design and is not the same element as the larger, older 4391960 used on earlier Whirlpool dryers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement heating element — generates the heat that dries clothes
Resolves "no heat," "insufficient heat," and "drying takes too long" symptoms caused by a burned-through coil
Nickel-chromium coil for effective, heat-and-abrasion-resistant heating
Compact "shorty" design for dryers with the lint filter near the control housing
Direct drop-in replacement — no modification required
Replaces 279837, WP279837, 2438, 279838VP, 279838A, 3398063, 3398064, 3403585, 8565582, W10724237, AP3094254, AH334313, EA334313, PS334313, and PS3343130
Compatible with Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Crosley, Admiral, Inglis, KitchenAid, and Jenn-Air electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XP279838
OEM Part Number
279838
Part Type
Dryer Heating Element Assembly ("Shorty")
Condition
Aftermarket Replacement
Coil Material
Nickel-chromium
Typical Resistance (Healthy Element)
Approx. 9-10 ohms
Legacy Predecessor
4391960 (larger, older design, not interchangeable)
Related Components
Cycling thermostat, high-limit thermostat, thermal fuse (see our WP3392519 listing)
Repair Difficulty
Medium — basic electrical skills and dryer panel disassembly required
Quantity
1 heating element assembly
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Crosley, Admiral, Inglis, KitchenAid, Jenn-Air
Installation Notes
⚠️ Unplug Dryer Before Starting — Test Resistance Before Assuming It's The Element Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel or the front, depending on your model, to reach the heater duct/blower housing area where the element is mounted. Before removing anything, inspect the old element visually for a break in the coil — sometimes you can see it directly, or feel it by gently wiggling each section of the coil. If nothing is visibly broken, test with a multimeter: place one probe on each terminal and look for a reading of approximately 9-10 ohms on a good element; no resistance at all confirms the element has failed. Photograph the wiring before disconnecting anything. Disconnect the wire terminals from the old element, remove the mounting screws or clips holding it in the duct housing, and pull it free. Install the new 279838 assembly in the same position, reconnect the wire terminals, and secure the mounting hardware — if the original connection wire shows burning or damage, replace it as well rather than reusing a damaged connector. Reassemble the panel, restore power, and run a test cycle to confirm the dryer is heating normally. Tools needed: 1/4" nut driver, 5/16" wrench, Phillips screwdriver, multimeter, work gloves.
Frequently Asked Questions
How do I test whether the element is actually bad?
Start with a visual inspection — often you can see a break directly in the coil, or find it by gently wiggling each section to check for a loose or separated point. If nothing is visible, use a multimeter set to ohms and place one probe on each terminal. A good element typically reads approximately 9 to 10 ohms; a reading of no resistance at all (open circuit) confirms the element has failed and needs replacing.
My dryer has no heat at all. Should I replace the element first, or check something else?
Check the thermal fuse first, since a blown fuse produces the exact same "no heat at all" symptom as a failed heating element and is a cheaper, faster part to test and replace — our WP3392519 listing covers the thermal fuse used on this same dryer platform. If the fuse tests good and the dryer still has no heat, the element itself is the next thing to test.
What's the difference between this "shorty" element and the older 4391960?
Both are Whirlpool dryer heating elements, but this 279838 is a more compact design used on dryers with the lint filter positioned on the top right near the control housing, while 4391960 is the larger, older element used on earlier Whirlpool dryer platforms. They are not interchangeable, so confirm which style your dryer uses — checking your model number or comparing the physical size of your old element — before ordering.
Should I check the connection wire while I'm replacing the element?
Yes, it's worth a look. The wire connecting to the element terminals can occasionally show burning or damage if the element was arcing or overheating before it failed. If you notice any discoloration, melting, or damage on the connection wire, replace it along with the element rather than reusing a compromised connector.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the nickel-chromium coil composition, resistance rating, compact "shorty" form factor, and terminal configuration of the original 279838 heating element used in compatible Whirlpool, Kenmore, Maytag, Amana, Roper, and related dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
5301EL1001J Dryer Genuine Heating Element
Fits Specific LG Dryer Models.
240V, 5400W complete assembly with housing and thermostats
Replaces Part Numbers: 5301EL1001J, 5301EL1001A, 1377645, AEG72910307, AH3527791, AP4439759, EA3527791, PS3527791, 5301EL1001H, 1377645, 5301EL1001E, 5301EL1001G, 5301EL1001S, 5301EL1001U, 5301EL1001W, AH3527790, AP5072170, EA3527790, PS3527790, AEG72910301, AP5669354, AEG72910309, AP7211081.
Description: This Heater Assembly is a Genuine OEM part for specific LG dryer models. This component is responsible for generating the heat required to dry clothes effectively. It consists of a heating element and necessary components that work together to maintain the desired drying temperature, ensuring clothes come out dry and ready to wear. Causes of a bad heater assembly can include wear and tear from regular use, overheating, electrical issues, or damage to the heating element itself. A malfunctioning heater assembly can lead to inefficient drying or no heat at all.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.go
5300622032 Genuine OEM Dryer Heater Restring - Compatible with Frigidaire, Electrolux, Kenmore
Product Description
Restore optimal drying performance with the 5300622032 Genuine OEM Dryer Heater Restring. This authentic Frigidaire-manufactured heating element restring coil is designed for select Frigidaire, Electrolux, Gibson, Kelvinator, Tappan, White Westinghouse, and Kenmore dryers, generating heat to efficiently dry clothes. Built for durability and precise fit, it addresses issues like no heat or insufficient heat.
Note: Includes one heating element restring coil with 1/4" terminals (4600 watts, 240 volts). Does not include heater housing insulators (131472100) or terminal block (3202786). Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: 5300622032, 08015672, 3202787, 3281114, AH451031, DE335, EA451031, NQ00622032, Q000622032, Q622032, TJ90DE335, WQ622032, PD00000126, EAP451031, AP2135127, PS451031.
Compatibility:
Compatible with models including but not limited to:
Frigidaire: FDE646GES0, FDE747GES0, FDE847GES0, F31C336ES0, F31C436ES0
Gibson: GSE746RFS0, GSE746RFS1, GDE336RES1, GDE546RES0
Tappan: TDE336RED0, TDE546REW0
Kenmore, Electrolux, Kelvinator, White Westinghouse: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Frigidaire, Electrolux, Gibson, Kelvinator, Tappan, White Westinghouse, and Kenmore dryers.
🔧 Specifications: Genuine OEM heating element restring coil, 1/4" terminals, 4600 watts, 240 volts.
💪 Reliable Performance: Authentic Frigidaire part ensures efficient heat generation and long-lasting operation.
🛠️ Easy Installation: Requires screwdriver, pliers, and nut driver; typically installed in 30–45 minutes.
🛡️ Effective Fixes: Resolves no heat or insufficient heat in the dryer.
Product Specification
Part Number: 5300622032
Component Type: Dryer heating element restring coil
Material: Metal alloy coil
Electrical Rating: 4600 watts, 240 volts
Mounting: Fits within existing heater housing, screw-mounted
Operating Conditions: Suitable for household dryer environments
Compliance: UL listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer heating efficiently today!
Add to cart now for a reliable fix!
ERP DA47-00244Q Refrigerator Defrost Heater
Replaces Part Numbers:DA47-00244Q, AP5587899, PS4140528.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
00701751 Refrigerator Genuine Defrost Heater
Replaces Part Numbers: 00701751, 00660332, 2000209, 660332, 701751, AH3484061, EA3484061, PS3484061, OEM18267702, AP4566925, PS8735951.
Description: This Defrost Heater Assembly is a Genuine part for Specific Bosch, Thermador refrigerator models. It plays a crucial role in the refrigerator's defrost cycle, melting away any frost that accumulates on the evaporator coils.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP 5300622034 Dryer Heater Restring
Replaces Part Numbers: 5300622034, AH451032, EA451032, AP2135128, PS451032.
Terminal Size: 5/16 inch
4600 Watts 240 Volts.
Restring Coil for 131553900, WE14X10015
Description: This Electric Dryer Heating Element is a replacement part for specific Frigidaire dryer models. Located within the dryer drum cavity, this component produces the necessary hot air to evaporate moisture from wet laundry. Terminal Size: 5/16 inch. This electric dryer heating element restring coil does not include the heater housing insulators.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO 3387747 Dryer Heating Element Replaces WP3387747
The XPARTCO 3387747 is an aftermarket replacement heating element assembly for Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper electric dryers. This element is the source of virtually all the heat in the dryer: current flows through a nickel-chromium coil, which glows and radiates heat as the blower pushes air across it and into the drum. Everything downstream — the drum temperature, the drying time, the final dampness of your clothes — depends on this coil working correctly.
Rated 5400W at 240V, with two 5/16" terminals for a direct connection. The nickel-chromium coil is rated at roughly 85% nickel-chromium content for effective, heat-and-abrasion-resistant heating, and it's mounted in high-temperature ceramic insulators that hold it firmly in the frame so it won't loosen or shift under the vibration of a running dryer. Over years of use, the coil itself typically fails with a visible break somewhere along its length — a section simply burns through and the circuit opens, cutting off heat entirely. It directly replaces WP3387747, WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, and PD00002365.
Quick Answer
The XPARTCO 3387747 Dryer Heating Element fixes Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper electric dryers with no heat, insufficient heat, or drying times that have gotten noticeably longer. 5400W, 240V, two 5/16" terminals. Replaces WP3387747, WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, PD00002365. If the dryer has no heat at all, check the thermal fuse first — it's a cheaper, faster fix, and a blown fuse produces the same "no heat" symptom as a failed element.
Common Problems This Part Fixes
Dryer runs a full cycle but produces no heat at all
Dryer produces some heat, but not enough to dry clothes properly
Drying times that have gotten noticeably longer than they used to
Clothes coming out cold or barely warm at the end of a cycle
Visible break or burned-through section in the heating coil
Element that tests as an open circuit (no continuity) with a multimeter
Dryer that heats inconsistently, cycling on and off unexpectedly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers:
WP3387747, WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, PD00002365
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This heating element is compatible with select Whirlpool electric dryers, and also fits select Kenmore, Maytag, KitchenAid, Amana, and Roper dryers built on the same platform, including model numbers such as:
GEW9200LW0, GEW9200LW1, GEW9250PL0, GEW9250PW0, GEW9250PW1
GEQ9800PW1, GEQ9800PW2
MEDB835DW4, MEDC700VW0
WED5100HW1, WED5500XW1, WED5700AC1, WED6120HW1, WED6620HW1, WED8300SW2
MED5500FW1, MED6230HW1, MED6230RHW1
Kenmore 110.82822101
Note: Always verify your full model number before ordering, since Whirlpool uses several different heating elements across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement heating element assembly — generates the heat that dries clothes
Resolves "no heat," "insufficient heat," and "drying takes too long" symptoms caused by a burned-through coil
Nickel-chromium coil (approx. 85% Ni-Cr content) for effective, heat-and-abrasion-resistant heating
High-temperature ceramic insulators hold the coil firmly in the frame against vibration
Rated 5400W at 240V
Two 5/16" terminals for a direct connection
Approximately 10"L x 6"W x 1"H
Direct drop-in replacement — no modification required
Replaces WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, and PD00002365
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
3387747
OEM Part Number
WP3387747
Part Type
Dryer Heating Element Assembly
Condition
Aftermarket Replacement
Wattage
5400 W
Voltage
240V
Terminals
2 (5/16")
Coil Material
Nickel-chromium (approx. 85% Ni-Cr)
Insulators
High-temperature ceramic
Dimensions
Approx. 10"L x 6"W x 1"H
Repair Difficulty
Medium — basic electrical skills and dryer panel disassembly required
Quantity
1 heating element assembly
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper
Installation Notes
⚠️ Unplug Dryer Before Starting — Test Continuity Before Assuming It's The Element Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel or the front, depending on your model, to reach the heater duct/blower housing area where the element is mounted. Before removing anything, test the old element with a multimeter set to continuity — a healthy element reads continuous end to end, while a failed one (with a visible break in the coil) reads open. Photograph the wiring before disconnecting anything. Disconnect the two wire terminals from the old element, remove the mounting screws or clips holding it in the duct housing, and pull it free. Install the new 3387747 assembly in the same position, reconnect the two wire terminals, and secure the mounting hardware. While the dryer is open, this is a good time to fully clean the exhaust vent ducting from the lint trap to the outside vent hood — restricted airflow is a major cause of heating element failure, and a fresh element installed into a clogged system will likely fail again prematurely. Reassemble the panel, restore power, and run a test cycle to confirm the dryer is heating normally. Tools needed: 1/4" nut driver, 5/16" wrench, Phillips screwdriver, multimeter, work gloves.
Frequently Asked Questions
My dryer has no heat at all. Should I replace the element first, or check something else?
Check the thermal fuse first. A blown thermal fuse produces the exact same "no heat at all" symptom as a failed heating element, and it's a much cheaper, faster part to test and replace. Whirlpool's own service guidance recommends checking the thermal fuse before replacing the element. If the fuse tests good and the dryer still has no heat, the element itself is the next thing to test and likely replace.
How can I tell if the element has actually failed?
The most reliable way is a continuity test with a multimeter — set it to continuity mode, disconnect the element's wires, and touch a probe to each terminal. A healthy element shows continuity (a complete circuit); a failed one shows open (no continuity), which usually corresponds to a visible break or burned-through section somewhere in the coil if you inspect it closely.
Why does the listing recommend cleaning the vent duct during this repair?
Restricted airflow from a lint-clogged exhaust duct is one of the most common root causes of heating element failure — when air can't move through the system properly, heat builds up around the element well beyond its designed operating range, accelerating wear and often leading directly to a burned-through coil. Since you'll already have the dryer open for this repair, cleaning the full duct run from the lint trap to the outside vent hood is a good use of the same trip and helps the new element last.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the 5400W/240V electrical rating, nickel-chromium coil composition, ceramic insulator mounting, and terminal configuration of the original WP3387747 heating element used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
