(4 Pack) XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse – Universal HVAC Replacement
Product Description
Protect your HVAC system’s control board with the XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse (4 Pack). These high-quality aftermarket blade fuses are designed to safeguard furnace and air conditioner control boards from electrical overloads and short circuits. A blown 5-amp fuse can cause the HVAC system to stop working entirely. Replacing it with reliable XPATC5 fuses helps restore operation while protecting sensitive electronic components.
XPATC5 fuses are commonly used in residential HVAC systems and are ideal to keep on hand for quick repairs.
Replaces Part Numbers
ATC-5, ATO-5, 5 Amp HVAC Control Fuse, Furnace Control Board Fuse, Air Conditioner 5A Fuse
Compatibility
This 5 amp HVAC control board fuse is compatible with many furnace and air conditioner systems from manufacturers including Carrier, Trane, Lennox, Goodman, Rheem, York, and others that use standard ATC/ATO 5-amp blade fuses.
Always verify fuse amperage and type before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent electrical specifications
⚡ 5 Amp Rating – Protects HVAC control boards from overloads
🧯 Critical Safety Component – Helps prevent damage to circuit boards
📦 Convenient 4-Pack – Keep spares on hand for future service
💰 Cost-Effective Solution – Affordable alternative to OEM HVAC fuses
📐 Product Specification
Part Number: XPATC5
Component Type: HVAC Control Board Fuse
Amperage Rating: 5 Amp
Voltage Rating: 32V
Fuse Style: ATC / ATO Blade Fuse
Quantity: 4-Pack
Application: Furnace & air conditioner control boards
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Needle-nose pliers or fuse puller
⚠️ Safety First: Always turn off power to the HVAC system before replacing fuses to avoid electrical shock or equipment damage.
Basic Steps:
Shut off power to the furnace or air conditioner.
Open the control board access panel.
Locate the blown 5-amp fuse.
Remove and replace it with a new XPATC5 fuse.
Restore power and test system operation.
⏱️ Time Required: 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket HVAC Parts
🔄 30-Day Return Policy
Protect your HVAC system and keep it running — Add to Cart Now for a reliable, budget-friendly solution!
WP3387749 Dryer Genuine OEM Heating Element – Compatible with Whirlpool, Kenmore, Maytag Dryers
Product Description
Restore your dryer’s heating performance with the WP3387749 Dryer Genuine OEM Heating Element. This factory-approved replacement part generates the heat needed to dry laundry efficiently. A failed heating element may cause your dryer to run but not heat, take longer to dry clothes, or shut down during cycles. Replacing it with this genuine OEM part ensures safe operation and long-lasting performance.
Replaces Part Numbers
WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418.
Compatibility
This heating element is compatible with select Whirlpool, Kenmore, Maytag dryers.
Example compatible models include (but are not limited to): Whirlpool LER4634EQ2, Kenmore 110.96573220, and Maytag MEDC215EW1.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Wide Compatibility – Fits Whirlpool, Kenmore, Maytag dryers
🔥 Restores Heating – Generates reliable, consistent heat for drying
💰 Cost-Effective OEM Repair – Genuine part ensures durability and performance
🛠️ DIY Friendly – Installs with standard tools in under 30 minutes
🛡️ Fixes Common Issues – Solves no-heat problems, long drying times, or mid-cycle shutdowns
📐 Product Specification
Part Number: WP3387749
Component Type: Dryer Heating Element
Material: High-temperature resistant metal coil with mounting housing
Mounting: Direct replacement heating element assembly
Operating Conditions: Designed for residential dryers
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Always unplug the dryer before beginning repairs to prevent electrical shock.
Steps:
Disconnect power and remove dryer rear access panel.
Locate the heating element housing inside the dryer.
Disconnect wire terminals and remove screws securing the old element.
Slide out defective element and install the new WP3387749.
Reconnect wires, secure housing, and reinstall rear panel.
Restore power and test dryer heating.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your dryer heating again — Add to Cart Now for a safe, factory-approved repair!
WP3387749 Dryer Genuine OEM Heating Element
Cross Reference Information
Part Number WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418.
17438200000109 Genuine OEM Midea Dryer Heating Element Assembly
The 17438200000109 is a Genuine OEM Midea replacement dryer heating element assembly compatible with a wide range of Midea and Insignia electric dryers, including the MLE41N1AWW, MLE43A3AWW, MLE47A3AGG, MLE47C3AWW, MLE47C4AWW, MLE47R5BWW, MLTE37N1BWW, CDE41N1AW, CLADE67W, LE43A3AWW, MDD160A2301E1305, and Insignia NS-FDRE67WH8A-C series. The heating element uses electrical resistance to generate the heat that warms air as it circulates through the dryer drum, evaporating moisture from wet clothes. Without a functioning heating element, the dryer will tumble and run normally but produce no heat, leaving clothes damp at the end of a cycle.
As a Genuine OEM part manufactured by Midea to factory specifications, the 17438200000109 is the complete heater assembly housing. It directly replaces 302461060002 and MDA17438200000109 (alternate catalog references for the same assembly). Note: when an electric dryer heating element fails due to overheating, the paired high-limit thermostat (Midea 17400513000460) is often stressed as well — inspecting or replacing it at the same time is recommended. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The 17438200000109 Genuine OEM Midea Dryer Heating Element Assembly fixes Midea and Insignia electric dryers that tumble normally but produce no heat, dry unevenly, or take much longer than usual to dry a load. Complete heater assembly housing. Genuine OEM. Replaces 302461060002, MDA17438200000109. Compatible with Midea MLE41N1AWW, MLE43A3AWW, MLE47A3AGG, MLE47C3AWW, MLE47C4AWW, MLE47R5BWW, MLTE37N1BWW, CDE41N1AW, CLADE67W, LE43A3AWW, MDD160A2301E1305, and Insignia NS-FDRE67WH8A-C electric dryers. Often paired with thermostat replacement (Midea 17400513000460).
Common Problems This Part Fixes
Dryer tumbles normally but produces no heat
Dryer takes significantly longer than usual to dry a full load
Clothes coming out damp or only partially dried at the end of a cycle
Uneven heat distribution — some loads dry while others don't
Heating element visibly burned through, broken, or showing signs of arcing
Dryer trips the circuit breaker when the heat setting is selected — shorted element
Burning smell during operation — element arcing at a weak point in the coil
Replaces Part Numbers
This heating element assembly directly replaces the following OEM and cross-reference part numbers:
17438200000109, AP7157535, PS18188573, MDA17438200000109
Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This heating element assembly is compatible with select Midea and Insignia electric dryers, including:
Midea MLE41N1AWW, MLE41N1AWWC electric dryers
Midea MLE43A3AWW, LE43A3AWW, LE43A3AWWFR electric dryers
Midea MLE47A3AGG electric dryer
Midea MLE47C3AWW, MLE47C4AWW electric dryers
Midea MLE47R5BWW electric dryer
Midea MLTE37N1BWW electric dryer
Midea CDE41N1AW electric dryer
Midea CLADE67W electric dryer
Midea MDD160A2301E1305 electric dryer
Insignia NS-FDRE67WH8A-C electric dryer (6.7 cu. ft., Midea-built)
Insignia NS-TDRE67W1 electric dryer (Midea-built)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Midea to factory specifications — guaranteed fit and performance
Complete heater assembly housing — generates the heat needed for the drying cycle
Delivers consistent, even heat distribution to reduce drying time and energy consumption
Durable construction designed to withstand frequent daily drying cycles
Replaces 302461060002 and MDA17438200000109
Compatible with Midea MLE, LE, CDE, CLADE, MLTE, and MDD series electric dryers, plus Insignia Midea-built models
Installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
17438200000109
Part Type
Dryer Heating Element Assembly
Condition
Genuine OEM
Application
Electric Dryers (Midea platform)
Often Replaced With
High-Limit Thermostat (Midea 17400513000460)
Compatible Brands
Midea, Insignia (Midea-built)
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Pull the dryer away from the wall and remove the rear service panel to expose the heating element housing. Take a photo of the wiring before disconnecting anything — this is important since the high-limit thermostat and thermal cut-off wiring are both in the same area as the element leads and it's easy to mix up terminals. Disconnect the high-limit thermostat/thermal cut-off wiring and the element leads from the old heating element assembly. Remove the mounting screws securing the element housing and slide the old assembly out. Install the new 17438200000109 assembly in the same orientation, reconnect all wires snugly to the correct terminals as documented in your photo, and reinstall the mounting screws. Reassemble the rear service panel, restore power, and run a test heat cycle to confirm the dryer is heating properly. Tip: while the rear panel is open, inspect the high-limit thermostat (Midea 17400513000460) — if the original element failed due to overheating, the thermostat may also need replacement. Tools needed: Phillips screwdriver, nut driver.
Frequently Asked Questions
How do I know if my dryer's heating element has failed?
The clearest sign is a dryer that tumbles and runs through a complete cycle normally but produces little or no heat, leaving clothes damp or only partially dried. You may also notice the dryer taking significantly longer than usual to dry a load as it tries to compensate with extended tumbling time. Visually inspecting the element after removing the rear panel can reveal burn marks, breaks in the coil, or visible arcing damage. A multimeter continuity test on the disconnected element will also confirm failure — a working element shows continuity, while a failed element reads an open circuit.
Should I replace the thermostat at the same time as the heating element?
It's a good idea to inspect it. When a heating element fails due to overheating — rather than simple end-of-life wear — the paired high-limit thermostat (Midea 17400513000460) located in the same area can also be stressed by the same heat event. Since the rear panel must already be open to replace the element, checking the thermostat's continuity at the same time is a quick step that can prevent a repeat repair if the thermostat is also on the verge of failing.
What is the difference between 17438200000109 and 302461060002?
These are the same heating element assembly. 302461060002 and MDA17438200000109 are alternate catalog reference numbers used by some parts suppliers for the identical Midea heater assembly. If your dryer's parts diagram or supplier listing shows either of these numbers, the 17438200000109 is the correct part and this listing covers all three references.
Does this element fit my Insignia dryer?
Yes — Insignia is a Best Buy house brand, and several Insignia electric dryer models (including the NS-FDRE67WH8A-C and NS-TDRE67W1) are manufactured by Midea and use the same internal components, including this heating element assembly. Always verify your specific Insignia model number before ordering to confirm compatibility.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Midea to factory specifications. It is the exact same heating element assembly installed in compatible Midea and Insignia electric dryers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 0130F00010 Gas Furnace Flame Sensor
Fits the Specific Goodman Gas Furnace models
Replaces Part Numbers:TJFLS013, AP6326767, 0130F00010
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 62-23543-01 Gas Furnace Flame Sensor – Compatible with Rheem, Ruud, and WeatherKing Furnaces
Product Description
Restore safe and reliable furnace operation with the XPARTCO 62-23543-01 Gas Furnace Flame Sensor. This high-quality aftermarket replacement detects the presence of a burner flame and signals the control board to keep the gas valve open. A dirty or failed flame sensor can cause short cycling, ignition failure, or a furnace that won’t stay lit. Replacing it with this durable XPARTCO sensor ensures proper flame detection and dependable heating performance.
Specification :
The furnace flame sensor is designed to detect the flame.
1/4”male quick connect, Angle - sensor offset: 90 degree.
Replaces Part Numbers
62-23543-01,62-23543-02, 62-23543-03, 62-23543-04
Compatibility
This replacement flame sensor fits select Rheem, Ruud, and WeatherKing gas furnaces.
Example compatible models include (but are not limited to):Rheem RGRJ series, Ruud UGDG series, WeatherKing RGRA series.
Always verify your furnace’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM flame-sensing performance
🔥 Accurate Flame Detection – Ensures gas valve remains open only when flame is present
💰 Cost-Effective Repair – Reliable alternative to expensive OEM sensors
🛠️ Simple Installation – Direct-fit design with single mounting screw
🛡️ Fixes Common Issues – Solves furnace short cycling, ignition failure, or burner shutdown
📐 Product Specification
Part Number: 62-23543-01
Component Type: Gas Furnace Flame Sensor
Material: Stainless steel sensor rod with ceramic insulator
Mounting: Single-screw bracket mount
Electrical Connection: Spade terminal
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, fine abrasive pad (optional for cleaning)
⚠️ Safety First: Turn off power and gas supply to the furnace before servicing.
Steps:
Shut off furnace power and gas supply.
Locate the flame sensor near the burner assembly.
Disconnect the wire and remove the mounting screw.
Install the new XPARTCO 62-23543-01 flame sensor.
Reconnect the wire, restore power and gas, and test furnace operation.
⏱️ Time Required: 5–10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance & HVAC Parts Supplier
🔄 30-Day Return Policy
Restore safe furnace ignition and heating — Add to Cart Now for a reliable, budget-friendly replacement!
WP8544772 Dryer Genuine OEM Heating Element
Replaces part Numbers: WP8544772, 8544772, 1180055, AP6013116, PS11746338.
Restore your dryer’s heating performance with the WP8544772 Heating Element. This Genuine OEM part is designed to provide consistent, efficient heat for drying your clothes quickly and evenly.
Key Features:
✅ Genuine OEM Part – built for performance and durability
🔁 Replaces: WP8544772, 8544772, 1180055, AP6013116, PS11746338.
🔥 Produces the necessary heat for drying cycles
🛠️ Fits select Whirlpool, Kenmore, Maytag, Amana, and Crosley dryers
🧰 Easy to install – plug-and-play direct replacement
⚠️ Unplug dryer before servicing. Need help confirming fit? We’re here to assist!
📦 Part Number: WP8544772💯 30-Day Money Back Guarantee
WP661566 Dishwasher Genuine High Limit Thermostat
Replaces Part Number: WP661566, 661566, W10339474, 2887, 3369777, 3370783, 3371618, 4171694, WP661566VP, AP6010246, PS11743423.
Description: The High Limit Thermostat is a Genuine OEM part for specific Kenmore, Whirlpool dishwasher models. This safety feature is designed to prevent the dishwasher from overheating by shutting off the power if the internal temperature exceeds a certain limit. It acts as a safeguard against potential hazards, such as fires, and ensures the dishwasher operates within safe temperature ranges.
W11025156 Genuine OEM Whirlpool Dryer Heating Element
The W11025156 is a genuine Whirlpool OEM heating element for Whirlpool, Kenmore, and Maytag electric dryers. This element is the source of virtually all the heat in the dryer: it converts electrical energy into heat, which the blower then circulates through the drum to dry your clothes. Even heat distribution from a properly functioning element is what keeps drying times consistent and prevents the dryer from having to run longer cycles to compensate.
Over years of use, the coil typically fails with a visible break somewhere along its length — a section simply burns through and the circuit opens, cutting off heat entirely. Symptoms of a failing element include clothes taking too long to dry, clothes coming out cold, or the dryer not heating at all. This part is also essential for preventing overheating, since a properly functioning element operates within its designed parameters rather than drawing excess current trying to compensate for a partial failure. It directly replaces W10608823.
Quick Answer
The W11025156 Genuine OEM Whirlpool Dryer Heating Element fixes Whirlpool, Kenmore, and Maytag electric dryers with no heat, insufficient heat, or drying times that have gotten noticeably longer. Replaces W10608823. Before replacing, clean out or inspect your exhaust venting — restricted airflow is a common cause of premature heating element failure, and a fresh element installed into a clogged system is likely to fail again.
Common Problems This Part Fixes
Dryer runs a full cycle but produces no heat at all
Dryer produces some heat, but not enough to dry clothes properly
Drying times that have gotten noticeably longer than they used to
Clothes coming out cold or barely warm at the end of a cycle
Visible break or burned-through section in the heating coil
Dryer not drying laundry despite completing a normal cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers:
W11025156, W10608823, 4461512, W10608823, AP6037386, AWP42261, EAP11770230, PD00034419, PS11770230.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This heating element is compatible with select Whirlpool electric dryers, and also fits select Kenmore and Maytag dryers built on the same platform, including model numbers such as:
MEDB855DC2, MEDB955FC1, MEDB955FW1 (Maytag)
YWED8000DW1, YWED8500DW1, WED9500EC0, WED9500EW0, WED8700EC2
Kenmore 11061632610, 11061632611, 11061632612, 11061633610, 11061633611
Kenmore 11068132411, 11068132412, 11068132413, 11068133411, 11068133412, 11068133413
Kenmore 11069132411, 11069132412, 11069132413, 11069133411, 11069133412, 11069133413
Kenmore 110C61633610, 110C68132413
Note: Always verify your full model number before ordering, since Whirlpool uses several different heating elements across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified coil design and electrical rating
Converts electrical energy into heat, circulated through the drum by the blower
Resolves "no heat," "insufficient heat," and "drying takes too long" symptoms caused by a burned-through coil
Ensures even heat distribution for consistent drying performance
Direct drop-in replacement — no modification required
Replaces W10608823
Compatible with Whirlpool, Kenmore, and Maytag electric dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W11025156
Part Type
Dryer Heating Element
Condition
Genuine OEM
Brand
Whirlpool
Function
Generates heat to dry clothes, circulated through the drum
Repair Difficulty
Medium — basic electrical skills and dryer panel disassembly required
Quantity
1 heating element
Compatible Brands
Whirlpool, Kenmore, Maytag
Installation Notes
⚠️ Unplug Dryer Before Starting — Clean The Vent While You Have The Panel Open Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the back panel: a 1/4" ratchet with a 5/16" socket handles most of the screws, and using a socket adapter on a screw gun can speed up removing and reinstalling the panel, since there are several screws to deal with. With the panel off, locate the heating element in the duct housing. Photograph the wiring before disconnecting anything. Disconnect the wire terminals from the old element, remove the mounting screws or clips holding it in the duct housing, and pull it free. Install the new W11025156 in the same position, reconnect the wire terminals, and secure the mounting hardware. While the dryer is open, this is a good time to fully clean the exhaust vent ducting from the lint trap to the outside vent hood — restricted airflow is a major cause of heating element failure, and a fresh element installed into a clogged system will likely fail again prematurely. Reassemble the panel, restore power, and run a test cycle to confirm the dryer is heating normally. Tools needed: 1/4" ratchet, 5/16" socket, work gloves.
Frequently Asked Questions
My dryer runs a full cycle but the clothes are still wet. Is this the heating element?
It's a strong possibility, especially if you've noticed drying times gradually getting longer before the dryer stopped heating altogether. One customer described exactly this symptom — "dryer not drying laundry" — and resolved it with this exact replacement element.
Do I need any special tools for this repair?
Just basic hand tools. A 1/4" ratchet with a 5/16" socket handles the back panel screws on most models. Using a socket adapter on a screw gun can speed up the process, since there are several screws to remove and reinstall on the back panel alone.
Why does the listing recommend cleaning the vent during this repair?
Restricted airflow from a lint-clogged exhaust duct is one of the most common root causes of heating element failure — when air can't move through the system properly, heat builds up around the element well beyond its designed operating range, accelerating wear and often leading directly to a burned-through coil. Since you'll already have the dryer open for this repair, cleaning the full duct run from the lint trap to the outside vent hood is a good use of the same trip and helps the new element last.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original coil design and electrical rating of the heating element originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
17438000001584 Genuine OEM Midea Dryer Belt Safety Switch
The 17438000001584 is a Genuine OEM Midea replacement belt safety switch compatible with select Midea, Criterion, and Insignia electric and gas dryers. This safety switch is positioned near the drive belt and tensioner pulley assembly, where it monitors belt-related conditions and interrupts electrical flow to the motor or heating circuit if a fault or unsafe condition is detected — such as a broken or severely slipped drive belt. This is a key safety mechanism: if the belt fails and the drum can no longer be safely driven, this switch helps prevent the motor from continuing to run unsafely or the heater from continuing to operate without normal airflow from drum rotation.
When this switch fails, the dryer may not start, may shut off unexpectedly during operation, or may fail to heat even though other components test correctly. As a Genuine OEM part manufactured by Midea to factory specifications, the 17438000001584 measures 2"L x 2"W x 3"H and weighs approximately 1 oz. It is found on the same parts diagram as the drive belt, tensioner pulley assembly, and drum support components on compatible models. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The 17438000001584 Genuine OEM Midea Dryer Belt Safety Switch fixes Midea, Criterion, and Insignia dryers that won't start, shut off unexpectedly during operation, or fail to heat despite other components testing normally. Mounted near the drive belt and tensioner pulley assembly — interrupts power if a fault or unsafe belt condition is detected. Dimensions: 2"L x 2"W x 3"H, approx. 1 oz. Genuine OEM. Compatible with Midea MLG45N3BMG, Criterion CDG41N1AW, CDG45N1AW, and related Midea-platform dryer models.
Common Problems This Part Fixes
Dryer not starting — safety switch not signaling normal belt/drive conditions
Dryer shutting off unexpectedly partway through a cycle
Dryer not heating despite the heating element, thermostat, and other components testing normal
Dryer behaving erratically after a drive belt failure or replacement
Intermittent power interruption during operation traced to this switch area
Switch contacts failing continuity test with a multimeter
Replaces Part Numbers
This belt safety switch directly replaces the following part number:
17438000001584, AP7157511, PS18188483
This is the Midea manufacturer part number used across multiple Midea, Criterion, and Insignia dryer models. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This belt safety switch is compatible with select Midea, Criterion, and Insignia dryers, including:
Midea MLG45N3BMG gas dryer
Midea MLG45N1BWW, MLG45N3BWW, and related MLG gas dryer series
Midea MLE series electric dryers (select models)
Criterion CDG41N1AW, CDG45N1AW gas dryers (air vent series)
Insignia electric and gas dryers built on the Midea platform (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Midea to factory specifications — guaranteed fit and performance
Safety switch mounted near the drive belt and tensioner pulley assembly
Interrupts electrical flow to the motor or heating circuit if a fault or unsafe belt-related condition is detected
Compact design: 2"L x 2"W x 3"H, approximately 1 oz
Compatible with Midea MLG/MLE series, Criterion CDG series, and Insignia Midea-built dryers
Installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
17438000001584
Part Type
Dryer Belt Safety Switch
Condition
Genuine OEM
Application
Electric and Gas Dryers (Midea platform)
Dimensions
2"L x 2"W x 3"H
Weight
Approximately 1 oz
Location
Near drive belt and tensioner pulley assembly
Compatible Brands
Midea, Criterion, Insignia
Installation Notes
⚠️ Unplug Dryer Before Starting (Shut Off Gas First on Gas Models) — Wear Work Gloves Disconnect power before beginning (and shut off the gas supply first if you have a gas dryer model). Wear work gloves — there are sharp metal edges inside the dryer cabinet. Remove the lint filter housing screws, release the top panel locking clips with a putty knife, and lift the top panel. Remove the front panel to access the drum, drive belt, and tensioner pulley assembly. Locate the belt safety switch in this area — refer to your model's parts diagram to confirm its exact mounting position, as it is positioned near the belt and tensioner pulley support. Photograph the wire connections before disconnecting. Disconnect the wires from the old switch, remove the mounting screw or clip, and pull the switch free. Install the new 17438000001584 switch in the same position, secure the mounting hardware, and reconnect the wires. While this area is open, it's a good time to inspect the drive belt and tensioner pulley for wear, since this switch is related to belt operation. Reassemble the front panel and top panel in reverse order. Restore gas and power, and run a test cycle to confirm the dryer starts and runs normally. Tools needed: Phillips screwdriver, putty knife, work gloves.
Frequently Asked Questions
What does the belt safety switch do?
The belt safety switch monitors belt-related conditions near the drive belt and tensioner pulley assembly and interrupts electrical flow to the motor or heating circuit if it detects a fault or unsafe condition — such as a broken or badly slipped drive belt. This is a protective measure: if the belt has failed and the drum can no longer be driven normally, the switch helps prevent continued unsafe operation of the motor or heater. It works alongside other safety components in the dryer (like the door/cover switch and thermal limiters) as part of an overall safety system.
My dryer just had a belt replacement and now isn't working right — could this switch be involved?
It's possible. Since this switch is positioned near the belt and tensioner pulley assembly, it can be disturbed, dislodged, or its connector improperly reseated during a belt replacement. If your dryer is behaving erratically after a recent belt repair — failing to start, shutting off, or not heating — check that this switch's connector is fully seated and that the switch itself wasn't damaged during the repair. If the connector is good and the switch tests as an open circuit with a multimeter, it has failed and needs replacement.
How do I test if this safety switch has failed?
Unplug the dryer, disconnect the switch's wire connector, and set your multimeter to continuity mode. With the belt and tensioner mechanism in their normal operating position, the switch should show closed continuity (allowing current to flow). If the switch shows an open circuit when it should be closed, it has failed and needs replacement. Always refer to your specific model's wiring diagram to confirm the expected switch state, since exact behavior can vary by dryer model.
Does this switch fit Insignia and Criterion dryers as well as Midea?
Yes — Insignia (Best Buy) and Criterion (Sears/Kmart) are house brands whose dryers in certain configurations are manufactured by Midea and use the same internal components, including this belt safety switch. Confirmed Criterion models include the CDG41N1AW and CDG45N1AW gas dryers. Always verify your specific model number before ordering to confirm compatibility.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Midea to factory specifications. It is the exact same belt safety switch installed in compatible Midea, Criterion, and Insignia dryers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DG64-00472B Gas Range / Stove Burner Knob
Fits Specific Samsung Range / Cooktop models.
Replaces Part Numbers: DG64-00472B, DG64-00347B, 3555006, AP5949297, PS9865173.
Description: The Knob Assembly is a replacement Part designed for adjusting the temperature of specific Samsung surface burner models. It accepts a D-shaped shaft and is sold individually.
This is an aftermarket part that can be used as a replacement for the OEM part.
17438100000436 Combo Washer / Dryer Genuine OEM Heating Element
Genuine OEM heating element designed for select Midea and Magic Chef combo washer / dryer units to restore proper drying heat.
✓ Genuine OEM Part ✓ Replaces 17438100000436 ✓ Compatibility Support
Product Description
The 17438100000436 Combo Washer / Dryer Genuine OEM Heating Element is designed for select Midea and Magic Chef combo washer / dryer units. This heating element produces heat during the drying cycle and helps restore proper drying performance.
A failed heating element can cause no heat, long drying times, damp clothes after the cycle, or inconsistent drying temperature.
Quick Answer
If your Midea or Magic Chef combo washer / dryer is not heating, takes too long to dry, or leaves clothes damp after the drying cycle, the 17438100000436 heating element may need replacement.
⚠️ Always verify your combo washer / dryer model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Combo washer / dryer not heating
Clothes still damp after drying cycle
Drying cycle takes too long
Inconsistent drying temperature
Failed or burned-out heating element
Replaces part Number
17438100000436, AP7157526, AP6984785, PS18188537
Compatibility
This genuine OEM heating element fits select Midea and Magic Chef combo washer / dryer models using part number 17438100000436.
Always verify your combo washer / dryer model number before ordering. Contact our support team if you’re unsure.
Key Features
Genuine OEM heating element
Designed for select Midea and Magic Chef combo washer / dryer units
Helps restore proper drying heat
Supports reliable drying cycle performance
Direct replacement component for compatible models
Product Specifications
Brand
Midea / Magic Chef
Part Type
Combo Washer / Dryer Heating Element
Primary Part Number
17438100000436
Compatible Appliance Type
Combo Washer / Dryer
Condition
Genuine New
Installation
Disconnect power before installation. Inspect wiring, thermal fuse, thermostat, airflow path, and related heating components before testing appliance operation.
Troubleshooting Guide
⚠️ Disconnect power before servicing the appliance.
Check for lint buildup or airflow restrictions before replacing the heating element.
Inspect the heating element for visible breaks, burns, or damage.
Check related thermostats, thermal fuse, and wiring connections.
Replace the heating element if no-heat or poor drying problems continue.
When Should You Replace This Part?
Replace the heating element if the Midea or Magic Chef combo washer / dryer does not heat, takes too long to dry, leaves clothes damp, or shows signs of a burned-out heating element.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Genuine Parts ✓ Compatibility Support ✓ Secure Checkout
```
