XPARTCO DA31-00334C Refrigerator Evaporator Fan Motor
The XPARTCO DA31-00334C is an aftermarket replacement evaporator fan motor for Samsung bottom-mount and side-by-side refrigerators. This small brushless DC (BLDC) motor sits behind the freezer's rear panel, directly in front of the evaporator coil, and its job is to pull cold air off that coil and push it through the duct system into both the freezer and fresh food compartments. Without it circulating air, the coil itself keeps getting cold, but that cold air never reaches your food — the freezer may still work reasonably well since it sits closer to the coil, while the fresh food side drifts warmer and warmer since it depends entirely on ducted airflow from the back.
Rated at 12V DC, 2.5W, 0.12A, running at approximately 1,870 RPM. As a brushless design, this motor has no physical brushes to wear out, so failure typically comes from a worn bearing that lets the blade wobble or bind, a winding that has burned out electrically, or a blade that has become jammed by a chunk of built-up frost or freezer debris. It directly replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, and EAP12590897. Also compatible with select Kenmore refrigerators built on the Samsung platform.
Quick Answer
The XPARTCO DA31-00334C Refrigerator Evaporator Fan Motor fixes Samsung bottom-mount and side-by-side refrigerators with uneven cooling, a fresh food compartment that's warmer than it should be, frost or ice buildup at the back or bottom of the freezer, or a grinding/buzzing noise from inside the cabinet. Brushless DC (BLDC) motor, 12V DC, 2.5W, 0.12A, ~1,870 RPM. Replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, EAP12590897. Verify your model number before ordering — Samsung uses several different evaporator fan motors, and this is not the same part as our DA81-06013A listing.
Common Problems This Part Fixes
Fresh food compartment running warmer than the freezer, or warmer than it used to
Uneven temperatures between shelves or between the fresh food and freezer sides
Frost or ice buildup accumulating at the back panel or bottom of the freezer
Grinding, buzzing, or rattling noise coming from inside the refrigerator cabinet
Noise that stops when the freezer door is opened and starts again once it's closed
Freezer holding temperature reasonably well while the fresh food side drifts warm
Fan blade that doesn't spin freely, or spins with noticeable wobble, when checked by hand
Refrigerator running constantly as the compressor tries to compensate for poor air circulation
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
DA31-00334C, DA31-00287B, DA96-00968A, 12035GE-12M-YT, 12V DC 0.26A, ARES2120RA, Model # 12035GE-12M-YT, AP6803162, ASM1061854, EAP12590897, PD00075168, PS12590897.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Samsung bottom-mount and side-by-side refrigerators, and also fits select Kenmore refrigerators built on the Samsung platform.
Note — not the same motor as DA81-06013A: Samsung uses several different evaporator fan motor designs across its refrigerator lineup. The DA31-00334C is a distinct part from our DA81-06013A listing, which is built for a different model family and has its own connector and mounting configuration. Fitting the wrong motor can result in a connector that won't mate with your wiring harness or a fan blade that doesn't clear the housing correctly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator.
Key Features
Brushless DC (BLDC) evaporator fan motor — no brushes to wear out over time
Circulates cold air from the evaporator coil throughout the freezer and fresh food compartments
Resolves "fresh food too warm," "uneven cooling," "frost buildup," and "grinding or buzzing noise" symptoms caused by fan motor failure
Rated 12V DC, 2.5W, 0.12A, approximately 1,870 RPM
Direct drop-in replacement matching the original mounting bracket and blade fitment
Replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, and EAP12590897
Compatible with select Samsung and Kenmore (Samsung-platform) refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPDA31-00334C
OEM Part Number
DA31-00334C
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
Samsung
Motor Type
Brushless DC (BLDC)
Voltage
12V DC
Wattage
2.5 W
Amperage
0.12 A
Speed
~1,870 RPM
Application
Bottom-Mount and Side-by-Side Refrigerators
Quantity
1 fan motor
Compatible Brands
Samsung, select Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Let The Freezer Thaw If Iced Over Disconnect power at the outlet before beginning, and remove all food from the freezer to a cooler for the duration of the repair. Wear work gloves. Access is through the freezer's rear interior panel: remove the shelving and bins as needed, then remove the screws securing the back panel and set it aside to expose the evaporator coil and fan assembly. If you see significant frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours (or run a manual defrost) before continuing, since ice can be masking the actual point of failure and can also make the old motor difficult to remove cleanly. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free — on many models the blade is a separate piece that pulls off the motor shaft. Transfer the fan blade to the new motor if it isn't included, or install the new blade supplied with this motor, matching the original orientation. Mount the new DA31-00334C in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
My freezer seems fine but the fresh food section is warm. Is this really the fan motor?
Yes, this is a very common and telling symptom pattern. The freezer compartment sits right next to the evaporator coil and can stay reasonably cold through simple proximity even with poor air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, while the freezer may seem to lag only slightly behind.
I hear a grinding or buzzing noise that stops when I open the freezer door. What does that mean?
This is a classic symptom of a worn fan motor bearing or a blade that's catching on built-up frost. Opening the door often triggers the refrigerator's internal light switch or door sensor, which can cut power to the fan momentarily — the noise stops because the fan stops spinning, then resumes once the door closes and the fan restarts. If you can see or reach the fan blade with the freezer open, check whether it spins freely and smoothly by hand; a blade that wobbles, binds, or contacts the housing points to the motor as the cause.
There's a lot of frost around the back panel of my freezer. Should I fix that before replacing the fan?
It's worth understanding which came first. Excess frost can be a cause of fan failure — a jammed blade can burn out the motor over time — or a result of it, since poor air circulation lets moisture condense and freeze unevenly around the coil area. Either way, thawing the ice out fully before you install the new motor makes the repair easier and lets you confirm the blade spins freely once everything is defrosted, rather than immediately jamming again on refrozen ice.
Do I need to transfer the fan blade from my old motor?
It depends on what's included with your specific order — check whether a blade came with your new motor before removing the old one. If a blade is not included, the blade from your original motor typically pulls off the shaft and can be transferred over. Photograph the blade's orientation on the shaft before removing it so you can reinstall it the same way; an improperly oriented blade can affect airflow or contact the housing.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 2.5W, 0.12A, ~1,870 RPM), brushless motor design, and mounting configuration of the original DA31-00334C evaporator fan motor used in compatible Samsung and Kenmore refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DA32-00011E Refrigerator Temperature Sensor
Replaces Part Numbers: DA32-00011E, DA32-00006N, AP4140987, PS4138598.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 4681JB1029B Refrigerator Condenser Fan Motor
13Vdc, 1.55W, 120mA, CCW.
Fits specific LG refrigerator models.
Replaces Part Numbers: 4681JB1029B, 4681JB1017B, 4681JB1017E, 4681JB1027B, AP4437343, OEM17749374, PS3523329.
Description: This Condenser Fan Motor is a replacement part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 4681JB1027C Refrigerator Evaporator Fan Motor
Replaces Part Numbers: 4681JB1027C, EAU60694512, 4681JB1027V, 4681JK1004E, AH3523323, EA3523323, EAU52096201, EAU60694529, SM1027C, AP4507961, PS3523323.
Replaces LG #4681JB1027C.
13VDC, 3.1 W, .24A.
Has quick disconnect.
Description: This Fan Motor is a replacement part for specific LG refrigerator models. It is essential for circulating air throughout the refrigerator and freezer compartments, ensuring that the temperature is evenly distributed and maintained at the set levels. This motor powers the fan that helps to cool the evaporator coils and dissipate heat, which is vital for the appliance's cooling efficiency.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO MHY62044106 Refrigerator Door Mullion Spring - Compatible with LG, Kenmore Refrigerators
Product Description
Restore proper sealing in your refrigerator with the replacement MHY62044106 Refrigerator Door Mullion Spring. This high-quality spring, designed for LG and Kenmore French-door refrigerators, ensures the mullion flap closes securely, maintaining an airtight seal between the doors to prevent energy loss and maintain cooling efficiency. Made of heavy-duty steel with a clockwise winding and 6 coils, this spring fits into the mullion hinge to resolve issues like doors not closing properly, mullion flap misalignment, or beeping alarms.
Note: Includes one spring. Disconnect power before installation.
Replaces part numbers: MHY62044106, 2676261, MHY62044104, PD00035635, EAP6012670, AP5657415, PS6012670
Compatibility:
Compatible with models including but not limited to:
LG: LFC25765ST, LFX21976ST, LFX25973ST, LFX25976ST, LFX25978SB, LFX25978ST, LFX25991ST, LFX28968SB, LFX28968ST, LFX28978SB, LFX28978ST, LFX28979ST, LFX31925SB, LFX31925ST, LFX31935ST, LFX31945ST, LMX28988ST, LMX31985ST
Kenmore: 795.71054.010, 795.71056.011, 795.71063.011
Other LG models: GF-B620BSL, GF-B620PL, GF-D613SL, GF-L613PL, GM-F208ST, GR-L218ASL, GR-L218CSL
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG and Kenmore French-door refrigerator models.
🔥 Specifications: replacement mullion spring, clockwise wound, 6 coils, heavy-duty steel, approximately 1-1/8" long, two legs (one shorter for door side), corrosion-resistant.
💰 Cost-Effective Alternative: replacement spring offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, pliers, work gloves; typically installed in 15–30 minutes.
🛡️ Reliable Fixes: Resolves doors not closing, mullion flap misalignment, beeping alarms, or cooling inefficiencies.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your refrigerator seals perfectly today!
Add to cart now for a budget-friendly fix!
XPARTCO WR60X10185 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X10185 is an aftermarket replacement evaporator fan motor located in the freezer compartment, for GE, Hotpoint, and select Kenmore, Haier, Monogram, and Café refrigerators. This motor pulls air across the evaporator coils to strip heat from it, then circulates that cold air through the freezer and, via ducting, to the fresh food compartment. This particular motor does not include a thermistor — it ships as a fan motor with a 4-wire harness on a 6-pin connector, with two of those six pin slots left empty. If your refrigerator's original connector has a white thermistor wire in it, or a separate connector for a freezer light, this is not the correct motor for your unit.
Rated 9.75V DC, 3.25W. A fan motor generally has a long service life, but it can burn out quickly if debris or ice buildup obstructs the blade and forces the motor to work against resistance it wasn't designed for. Common symptoms of a failing motor include unusual noise from the freezer, a fresh food compartment that's warmer than it should be while the freezer stays reasonably cold, frost or ice accumulating around the fan or coil, and a refrigerator that runs constantly trying to compensate for lost circulation. It directly replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, EAP1019114, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, and WR60X10157. As an aftermarket replacement, the WR60X10185 is built to OEM-equivalent quality standards.
Quick Answer
The XPARTCO WR60X10185 Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, and select Kenmore refrigerators where the fresh food section runs warm while the freezer stays cold, there's unusual noise from the freezer, or frost is building up around the coil. 9.75V DC, 3.25W, 4-wire harness on a 6-pin connector (2 pins empty). Does NOT include a thermistor. Replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, WR23X10353, WR23X10355, WR23X10364, WR60X10043, WR60X10154, and others listed below. If your old connector has a white thermistor wire, you need WR60X10074 instead; if it has a light connector, you need WR23X10467.
Common Problems This Part Fixes
Fresh food compartment running warmer than normal while the freezer stays reasonably cold
Unusual noise — humming, buzzing, or grinding — coming from the freezer
Freezer not cooling properly, which in turn affects compressor performance
Frost or ice buildup accumulating around the fan blade or evaporator coil
Refrigerator running continuously as it struggles to maintain temperature
Fan motor that has burned out due to an obstruction preventing the blade from turning
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10185, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, WR60X10157, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, 197D2039P013, 1170107, UDQT26GE4, AP3875639, AGE29155, PD00000986, PS1019114, EAP1019114
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform.
Note — check your connector before ordering: GE uses several different evaporator fan motor variants that look nearly identical, and choosing the wrong one means the connector or function won't match your refrigerator. This WR60X10185 motor has no thermistor and a plain 4-wire harness with 2 empty slots on its 6-pin connector. If your old motor's connector has a white thermistor wire in it, you need WR60X10074 instead (harness with integrated thermistor). If your old connector instead has a dedicated light connector, you need WR23X10467. This part is also a separate motor from our WR60X10318 listing, which is a side-by-side platform assembly with its own integrated thermistor and a longer harness. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator.
Key Features
Aftermarket replacement built to match GE's factory-specified motor and blade design
Pulls air across the evaporator coils and circulates it through the freezer and fresh food compartments
Resolves "fresh food warm while freezer stays cold," "unusual noise," and "frost buildup" symptoms caused by fan motor failure
Rated 9.75V DC, 3.25W
Includes the fan motor and 4-wire harness assembly (does not include thermistor)
Direct drop-in replacement matching the original mounting and blade fitment
Replaces a wide range of legacy WR23X and WR60X part numbers plus AP3875639 and PS1019114
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPWR60X10185
OEM Part Number
WR60X10185
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
GE
Location
Freezer compartment
Voltage
9.75V DC
Wattage
3.25 W
Harness
4-wire, 6-pin connector (2 pins unused)
Includes Thermistor
No
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Kenmore, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Check Your Connector Type First Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before removing the old motor, look closely at its connector: confirm it's a plain 4-wire harness with no thermistor wire and no separate light connector, matching this replacement. Access is through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10185 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
How do I know if I need this motor or the one with the thermistor?
Look directly at your old motor's electrical connector before ordering. This WR60X10185 motor has a plain 4-wire harness on a 6-pin plug, with two of the six pin positions left empty — there's no thermistor wire involved. If your connector instead has a white thermistor wire running into it, you'll need WR60X10074, which includes an integrated thermistor and is not interchangeable with this motor. If your connector has a separate plug specifically for a freezer light, you'll need WR23X10467 instead.
My fresh food section is warm but the freezer seems fine. Is this the right part?
Yes, this is a very common and telling symptom pattern. The freezer sits right next to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, and GE's own guidance confirms that a fresh-food-warm/freezer-fine pattern points to this fan.
Why would a fan motor "burn out quickly" instead of just wearing out slowly?
While this motor generally has a long service life, it can fail rapidly if something obstructs the fan blade from turning — commonly built-up frost or ice, or occasionally debris. When the blade can't turn freely, the motor works against resistance it wasn't designed for, which accelerates internal wear and can burn it out much faster than normal aging would. Clearing ice from around the fan before or during replacement helps prevent stressing the new motor the same way.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the original 9.75V, 3.25W motor design, blade fitment, and 4-wire harness configuration of the fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine Refrigerator Replacement Part
DA97-12625A Refrigerator Genuine Auto-Close Lever
Genuine auto-close lever for select refrigerator door hinge and closure systems.
Product Overview
The DA97-12625A Refrigerator Auto-Close Lever is a genuine replacement part designed for compatible refrigerators. The lever works with the door hinge and closure mechanism to help guide the refrigerator door into the proper closed position.
Use this part when the original lever is cracked, worn, broken, loose, or no longer helping the door close correctly.
Quick Answer
DA97-12625A is a genuine refrigerator auto-close lever for compatible door closure assemblies. Replace it when the original lever is damaged or the door no longer closes and aligns as intended.
Common Problems This Part May Fix
Refrigerator door does not close smoothly
Door does not pull fully into the closed position
Auto-close action is weak or inconsistent
Lever is cracked, broken, or worn
Door alignment changes near the closed position
Replaces and Cross-References
DA97-12625A, DA97-13070A, 3527780, AP5620329, ASM32839, EAP4176636, PD00027974, PS4176636
Part number is provided for identification. This listing is for a genuine replacement part.
Compatibility
Fits select refrigerators that specify auto-close lever part number DA97-12625A.
Important: Verify the complete refrigerator model number, door position, and original lever part number before ordering. Similar-looking hinge and closure components may differ by model or door side.
Key Features
Genuine replacement part
Designed for compatible refrigerator door closure systems
Helps guide the door into the closed position
Supports proper door alignment near closing
Direct replacement for applications calling for DA97-12625A
Product Specifications
Part Number
DA97-12625A
Part Type
Refrigerator Auto-Close Lever
Application
Compatible Refrigerator Door Systems
Function
Assists door closing and alignment
Condition
New
Part Quality
Genuine Replacement Part
Package Quantity
1 Auto-Close Lever
Installation & Troubleshooting Notes
Disconnect refrigerator power before service.
Support the door if hinge or closure hardware must be loosened or removed.
Inspect the original auto-close lever for cracks, wear, deformation, or looseness.
Check nearby hinge and closure components for related wear or damage.
Install the replacement lever in the same position and orientation as the original.
Confirm the door opens, aligns, and closes smoothly before returning the refrigerator to normal use.
Diagnostic tip: A door that does not close correctly may also have worn hinges, loose mounting hardware, cabinet leveling issues, or gasket interference. Inspect the full door system before replacing only the lever.
Frequently Asked Questions
What does DA97-12625A do?
It works with the refrigerator door closure system to help guide the door into the proper closed position.
Is DA97-12625A a genuine part?
Yes. This listing is for a genuine refrigerator auto-close lever.
When should this lever be replaced?
Replace it if it is cracked, broken, excessively worn, loose, or no longer supporting proper door closing.
Will this fit every refrigerator?
No. Match the complete refrigerator model number, door position, and original part number before ordering.
Shop With Confidence
Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether DA97-12625A is correct for your appliance.
Genuine ReplacementDoor Closure PartModel Fitment SupportFast U.S. Shipping
EXPHV14 Microwave H. V. Diode
Replaces Part Numbers: 00625682, 10001605, 3278398, AP5804800, PS8770335, W11256462, W10492276, W10492278, W10886077, WPW10492276, WPW10575765, 4393600, 461964697812, 4845678, 8184664, 8205361, W10163432, W10245187, W10575765, W11222648, AP6784287, PS12584264.
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
ERP 6750CL0001D Refrigerator Compressor Overload Protector
Fits Specific LG, Kenmore Refrigerator Models.
This Compressor Overload is an essential replacement part designed specifically for Specific Kenmore brand refrigerators. Compatible with a wide range of LG models, this overload ensures optimal cooling performance and extends the lifespan of your refrigerator.
Replaces Part Number 6750CL0001D, AH3603394, EA3603394, AP5331981, PS3603394.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
XPARTCO DA32-10104N Refrigerator Temperature Sensor
The XPARTCO DA32-10104N is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. This sensor is mounted on or near the evaporator coil and continuously monitors the internal temperature of the refrigerator compartment, transmitting real-time readings to the electronic control board.
Based on the data received from the sensor, the control board regulates the compressor, evaporator fan motor, and defrost system to maintain the set temperature. When this sensor fails or drifts out of calibration, the control board receives inaccurate temperature readings — leading to a refrigerator that runs too cold, too warm, or triggers a 5E/SE error code. Features a 9-inch cord for easy installation and a sensitive thermal element with temperature detection accuracy of ±0.1°C.
Quick Answer
The XPARTCO DA32-10104N Refrigerator Temperature Sensor fixes refrigerators that are too warm, too cold, display a 5E/SE error code, or have inconsistent temperatures that spoil food. It monitors internal refrigerator temperature and sends data to the control board to regulate cooling. Compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators.
Common Problems This Part Fixes
Refrigerator running too warm — food spoiling faster than normal
Refrigerator running too cold — food or drinks freezing in the fresh food section
5E or SE error code displayed on the control panel
Inconsistent or fluctuating temperatures inside the refrigerator
Compressor running continuously without reaching set temperature
Excessive frost or ice buildup on evaporator coils
Replaces Part Numbers
This sensor directly replaces the following OEM and cross-reference part numbers:
DA32-10104N, DA32-10104V, 2030330, ASM1216617, PD00026468, EAP4138666, AP4979323, PS4138666.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select refrigerators from the following brands:
Samsung French door refrigerators
Samsung side-by-side refrigerators
Samsung bottom freezer refrigerators
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Monitors internal refrigerator temperature and sends real-time data to the electronic control board
Fixes 5E/SE error codes caused by a faulty or out-of-calibration temperature sensor
Temperature detection accuracy of ±0.1°C for precise cooling control
9-inch cord length for easy installation and connection to the control board
Aftermarket replacement built to OEM-equivalent quality standards
Direct drop-in replacement — no modification required
DIY-friendly repair — installs with basic hand tools in 30–45 minutes
Product Specifications
Part Number
DA32-10104N
Part Type
Refrigerator Temperature Sensor (Thermistor)
Condition
Aftermarket Replacement
Application
Refrigerator Temperature Control System
Cord Length
9 inches
Detection Accuracy
±0.1°C
Resistance at 70°F
~9.3K ohms
Resistance at 90°F
~7.7K ohms
Resistance at 100°F
~6.2K ohms
Resistance at 120°F
~4.3K ohms
Compatible Brands
Samsung
Installation Notes
⚠️ Safety First — Unplug Refrigerator Before Starting Unplug the refrigerator from the power source before beginning any repair. Safely remove and store any food that could deteriorate while the power is off. Wear work gloves to protect your hands. The DA32-10104N sensor is located near the evaporator coil, typically behind the rear panel inside the refrigerator or freezer compartment. Remove the panel, locate the sensor along the yellow wire, disconnect the old sensor from its plug, and connect the new sensor in the same position. Reassemble the panel and restore power. Allow 24 hours for the refrigerator to return to normal operating temperature. Tip: Before replacing, test the old sensor with a multimeter — resistance readings outside the values in the specs table above confirm a faulty sensor. Consult your refrigerator's service manual for model-specific instructions.
Frequently Asked Questions
Will the DA32-10104N fit my Samsung refrigerator?
This sensor is compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. Use the model search above to verify your model, or contact our support team before ordering.
What does the temperature sensor do?
The temperature sensor (thermistor) continuously monitors the internal temperature of the refrigerator and sends readings to the electronic control board. The control board uses this data to regulate the compressor, fans, and defrost system to maintain the set temperature. When the sensor fails or drifts out of range, the control board receives inaccurate data and cannot maintain proper cooling.
What are signs that my temperature sensor needs replacement?
Common signs include: the refrigerator running too warm or too cold, food spoiling faster than normal, a 5E or SE error code on the display, inconsistent temperatures, or the compressor running continuously without reaching the set temperature.
How do I test the DA32-10104N sensor before replacing it?
Use a multimeter to measure the resistance across the sensor terminals. At 70°F the reading should be approximately 9.3K ohms, at 90°F approximately 7.7K ohms, at 100°F approximately 6.2K ohms, and at 120°F approximately 4.3K ohms. Readings significantly outside these values indicate a faulty sensor that needs replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is designed to deliver reliable, accurate temperature sensing at a more affordable price point.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Refrigerator Replacement Part
DA97-14992A Refrigerator Genuine Auto-Close Lever
Genuine auto-close lever for select refrigerator door hinge and closure systems.
Product Overview
The DA97-14992A Refrigerator Auto-Close Lever is a genuine replacement part designed for compatible refrigerators. The lever works with the door hinge and closure mechanism to help guide the refrigerator door into the proper closed position.
Use this part when the original lever is cracked, worn, broken, loose, or no longer helping the door close correctly.
Quick Answer
DA97-14992A is a genuine refrigerator auto-close lever for compatible door closure assemblies. Replace it when the original lever is damaged or the door no longer closes and aligns as intended.
Common Problems This Part May Fix
Refrigerator door does not close smoothly
Door does not pull fully into the closed position
Auto-close action is weak or inconsistent
Lever is cracked, broken, or worn
Door alignment changes near the closed position
Replaces and Cross-References
DA97-14992A, 3974211, AP5915404, ASM138875, EAP9604575, PD00039402, PS9604575
Part number is provided for identification. This listing is for a genuine replacement part.
Compatibility
Fits select refrigerators that specify auto-close lever part number DA97-14992A.
Important: Verify the complete refrigerator model number, door position, and original lever part number before ordering. Similar-looking hinge and closure components may differ by model or door side.
Key Features
Genuine replacement part
Designed for compatible refrigerator door closure systems
Helps guide the door into the closed position
Supports proper door alignment near closing
Direct replacement for applications calling for DA97-14992A
Product Specifications
Part Number
DA97-14992A
Part Type
Refrigerator Auto-Close Lever
Application
Compatible Refrigerator Door Systems
Function
Assists door closing and alignment
Condition
New
Part Quality
Genuine Replacement Part
Package Quantity
1 Auto-Close Lever
Installation & Troubleshooting Notes
Disconnect refrigerator power before service.
Support the door if hinge or closure hardware must be loosened or removed.
Inspect the original auto-close lever for cracks, wear, deformation, or looseness.
Check nearby hinge and closure components for related wear or damage.
Install the replacement lever in the same position and orientation as the original.
Confirm the door opens, aligns, and closes smoothly before returning the refrigerator to normal use.
Diagnostic tip: A door that does not close correctly may also have worn hinges, loose mounting hardware, cabinet leveling issues, or gasket interference. Inspect the full door system before replacing only the lever.
Frequently Asked Questions
What does DA97-14992A do?
It works with the refrigerator door closure system to help guide the door into the proper closed position.
Is DA97-14992A a genuine part?
Yes. This listing is for a genuine refrigerator auto-close lever.
When should this lever be replaced?
Replace it if it is cracked, broken, excessively worn, loose, or no longer supporting proper door closing.
Will this fit every refrigerator?
No. Match the complete refrigerator model number, door position, and original part number before ordering.
Shop With Confidence
Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether DA97-14992A is correct for your appliance.
Genuine ReplacementDoor Closure PartModel Fitment SupportFast U.S. Shipping
