XPARTCO W10498976 Refrigerator Water Inlet Valve Replaces WPW10498976
The XPARTCO W10498976 is an aftermarket replacement refrigerator water inlet valve assembly compatible with select Whirlpool, Maytag, KitchenAid, Kenmore, and Ikea bottom-freezer and French door refrigerators in the WRB, WRF, MBF, GX5, GB9, GB2, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the refrigerator that controls the flow of water from the household supply line to the ice maker and, on models with a door dispenser, to the water dispenser. When the solenoid coil burns out or the valve seat becomes clogged with mineral deposits, the ice maker stops producing ice, the water dispenser stops working, water trickles weakly, or water leaks from the valve body.
Rated 120V, 50/60Hz, 35W solenoid, this valve measures 3-1/2"L x 2-3/4"W x 3"H and includes the valve body and mounting bracket. It connects via 1/4" inlet fitting to the household supply line and uses push-in tube fittings on the outlet side. It directly replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, 2315508, IMV-576, AP6022334, EAP11755667, PD00024636, PS11755667, WP2315576, and WV8047. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO W10498976 Refrigerator Water Inlet Valve fixes Whirlpool-family bottom-freezer and French door refrigerators where the ice maker is not making ice, the water dispenser is not working or producing only a trickle, or water is leaking from the back of the refrigerator. 120V/50-60Hz/35W solenoid, 3-1/2"L x 2-3/4"W x 3"H, includes bracket. 1/4" inlet connection. Replaces WPW10498976, W10420082, W10498974, K-78200, 2684516, AP6022334, PS11755667. Compatible with Whirlpool WRB/WRF, Maytag MBF, KitchenAid, Kenmore, and Ikea.
Common Problems This Part Fixes
Ice maker not producing ice or producing very small cubes due to insufficient water supply
Water dispenser not working — no water flows when the lever or button is pressed
Water dispenser producing only a trickle — valve partially blocked or solenoid weakening
Water leaking from behind the refrigerator near the water valve
Ice maker fills but overflows — valve stuck open and not closing properly
Humming sound near the back of the refrigerator when requesting ice or water — solenoid energized but valve not opening
No water reaching the refrigerator despite supply line being connected and pressurized
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
WPW10498976, W10498976, W10420082, AWP50873, EAP11755667, PD00024636, AP6022334, PS11755667.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select bottom-freezer and French door refrigerators from the following brands and series:
Whirlpool refrigerators — WRB322, WRB329, WRF535, WRF555, and related WRB/WRF series (French door and bottom-freezer models)
Maytag refrigerators — MBF1958, MBF2258, and related MBF series
KitchenAid refrigerators — select bottom-freezer and French door models
Kenmore / Sears refrigerators — select Whirlpool-built models
Ikea refrigerators — select models (Whirlpool-built)
Other Whirlpool-platform models including GB9, GB2, GX5, GX2, ET1CH, ET8CH, IX5HH, ED22, and related series
Note: Always verify your exact model number before ordering — water inlet valves are model-specific and not universal across all refrigerator configurations. Check that the supply line connection size (1/4") matches your existing supply line before purchasing.
Key Features
Solenoid-operated valve — opens on command from the refrigerator's control board to supply water to the ice maker and water dispenser
Rated 120V, 50/60Hz, 35W — correct electrical specifications for compatible Whirlpool-family refrigerators
Dimensions: 3-1/2"L x 2-3/4"W x 3"H — includes mounting bracket for direct installation
1/4" inlet connection — matches standard residential refrigerator supply line diameter
Push-in outlet tube fittings — easy connection to existing water supply tubing inside the refrigerator
Plastic and metal construction — durable and resistant to mineral buildup
Replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, AP6022334, and over 10 additional cross-references
Compatible with Whirlpool WRB/WRF series, Maytag MBF series, KitchenAid, Kenmore, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
W10498976
OEM Part Number
WPW10498976
Part Type
Refrigerator Water Inlet Valve Assembly
Condition
Aftermarket Replacement
Application
Bottom-Freezer and French Door Refrigerators
Voltage
120V AC
Frequency
50/60 Hz
Solenoid Wattage
35W
Dimensions
3-1/2"L x 2-3/4"W x 3"H
Inlet Connection
1/4 inch
Color
Brown / Blue / Yellow / Gray
Material
Plastic / Metal
Includes
Water valve body and mounting bracket
Compatible Brands
Whirlpool, Maytag, KitchenAid, Kenmore, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the household water supply valve before beginning. Place a towel and small container under the valve area to catch residual water. Pull the refrigerator away from the wall to access the back lower panel — remove the panel screws to expose the water inlet valve. Photograph the wiring harness connections and water tube connections before disconnecting. Turn off the water supply and disconnect the 1/4" supply line from the valve inlet — use an adjustable wrench, as some compression fittings may be stuck. Squeeze the plastic retaining clips on the outlet tube fittings and pull the internal water tubes free. Disconnect the wiring harness. Unscrew the mounting bracket and remove the old valve. Install the new W10498976 valve with its bracket, reconnect the internal water tubes (push until they click), reconnect the wire harness and supply line. Restore water supply and power. Run a water dispenser test and check for leaks. Tools needed: Phillips screwdriver, adjustable wrench, needle-nose pliers.
Frequently Asked Questions
What does the refrigerator water inlet valve do?
The water inlet valve is an electrically controlled solenoid valve that opens on command from the refrigerator's control board to allow household water pressure to push water through to the ice maker fill tube or the water dispenser. When the ice maker calls for water or you press the dispenser lever, the board sends voltage to the solenoid coil, which opens the valve. When the demand is satisfied, the voltage stops, the spring closes the valve, and water flow stops. A failed solenoid coil — or a valve seat clogged with mineral deposits — prevents the valve from opening or closing correctly, causing no water, weak water, overflow, or dripping.
What is the difference between W10498976 and WPW10498976?
These are the same water inlet valve. WPW10498976 is the updated Whirlpool OEM part number that superseded the original W10498976. The W10420082 and W10498974 are also cross-references for this same valve from earlier production runs. This aftermarket replacement is compatible with all of these numbers.
How do I know if the water inlet valve has failed vs. something else?
First confirm the household water supply valve behind the refrigerator is fully open and the supply line is not kinked. Then check the water filter — a clogged filter is one of the most common causes of weak or no water flow and is mistaken for a valve failure. If both supply pressure and the filter are good, test the valve's solenoid coil with a multimeter — a working coil reads 200–500 ohms of resistance; an open circuit confirms failure. If the solenoid tests good but the valve still does not open when the control board sends voltage, the valve seat may be physically clogged with mineral deposits and the valve needs to be replaced.
My ice maker is not working but my water dispenser is fine — is it the valve?
Possibly — but if the water dispenser works normally, the main valve solenoid is likely functioning. On some refrigerator configurations, the ice maker and the dispenser are controlled by separate solenoid ports on the valve assembly. If only the ice maker port has failed, the dispenser can continue working while ice production stops. Test the ice maker solenoid coil separately. However, a more common cause of ice maker failure with a working dispenser is the ice maker module, freezer temperature, or ice maker shut-off arm — rule out those causes before replacing the valve.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from plastic and metal to match the electrical specifications and dimensions of the original WPW10498976 water inlet valve assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Whirlpool OEM Part
Whirlpool W10918008 Refrigerator Door Closer - Gray (Left Hand)
Left-hand gray refrigerator door closer for the door hinge and closing assembly.
Quick Answer
W10918008 is a genuine Whirlpool OEM left-hand gray refrigerator door closer. It works with the door hinge and closure mechanism to help guide the refrigerator door into its proper closed position and replaces earlier part number W10833741.
Product Description
The W10918008 door closer works with the refrigerator door hinge and closing mechanism to guide the left-hand fresh-food door through the final portion of its closing movement. The closer helps the door settle into its intended closed position as the hinge moves.
A cracked or worn closer can cause the door to close unevenly, need extra force near the end of travel, or fail to settle into position correctly. A door that remains partially open can allow cold air to escape, which may contribute to temperature problems, condensation, frost, and longer compressor run time.
Symptoms This Part Fixes
Left-hand refrigerator door does not close smoothly
Door needs an extra push near the fully closed position
Door feels uneven or shifts as it closes
Auto-closing action is weak or inconsistent
Original closer is visibly cracked, worn, or broken
Door does not settle securely into its normal closed position
Replaces Part Numbers
Use these verified numbers to identify the correct replacement:
W10918008, W10833741, 4461320, AP6038207, AWP42675, EAP11770044, PD00065465, PS11770044
Cross-reference numbers are listed for identification only. This listing ships the genuine Whirlpool OEM part.
Compatibility
Fits select Whirlpool-built refrigerators that specify part number W10918008, including the following verified model examples:
WRF532SNHZ06 · JFC2089BEP07 · MFC2062FEZ08 · WRF535SMHZ06 · KRFF302ESS05 · MFI2570FEZ12 · WRF535SWHZ06 · KRFF302EWH04 · WRFA35SWHZ06 · WRF535SMHZ07
⚠️ Important: This is the left-hand gray door closer. Always verify your refrigerator's complete model number, door side, and original part number before ordering. Contact our support team if you're unsure.
Key Features
Genuine Whirlpool OEM replacement part
Manufacturer part number W10918008
Left-hand refrigerator door position
Gray finish
Replaces previous part number W10833741
Designed for the refrigerator door closing and hinge assembly
Product Specifications
Part Number
W10918008
Brand
Whirlpool
Part Type
Refrigerator Door Closer / Closing Cam
Assembly
Refrigerator Door / Hinge Closing Assembly
Position
Left Hand
Color
Gray
Function
Helps guide the refrigerator door into the closed position
Part Quality
Genuine Whirlpool OEM
Condition
New
Installation Notes
Disconnect refrigerator power before service.
Support the refrigerator door before loosening or removing hinge-related hardware.
Confirm that the existing closer is on the left-hand side and matches W10918008 or previous part number W10833741.
Inspect the closer, hinge, mounting points, and nearby hardware for cracks, wear, looseness, or deformation.
Remove the original closer while noting its installed position and orientation.
Install W10918008 in the same left-hand position.
Reassemble the hinge hardware and verify that the door opens, aligns, and closes normally.
⚠️ Diagnostic tip: Poor door closing can also be caused by worn hinge components, loose hardware, cabinet leveling problems, or gasket interference. Inspect the complete door system before replacing only the closer.
Frequently Asked Questions
What does Whirlpool W10918008 do?
W10918008 is the left-hand refrigerator door closer. It works with the door hinge and closing mechanism to help guide the door through the final portion of its travel and into the proper closed position.
Is W10918008 a genuine Whirlpool OEM part?
Yes. W10918008 is a genuine Whirlpool OEM refrigerator door closer. It is used on select Whirlpool-built refrigerator models and brands.
How can I check whether the door closer is actually damaged?
Open the left-hand refrigerator door and slowly move it through the final portion of closing while watching the lower hinge and closer area. If the closer is visibly cracked, broken, deformed, loose, or fails to move smoothly while the hinge hardware remains secure, the closer may need replacement.
Does the left-hand position matter?
Yes. W10918008 is specifically identified as the left-hand gray door closer. The matching right-hand closer is a different part, so verify the door side and complete appliance model before ordering.
Why should I match the model number instead of comparing the part visually?
Door closers can look very similar while having different geometry, mounting points, colors, or left/right orientation. Matching the complete refrigerator model and manufacturer part number is more reliable than appearance alone.
What should I inspect while replacing the closer?
Inspect the hinge, mounting hardware, door alignment, and gasket contact while the door is supported. If another closure component is worn or loose, replacing the closer alone may not fully correct the door problem.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPHVP-16 Microwave Convection Oven High Voltage Diode – Replaces TurboChef 100481 – Compatible with Commercial & Residential Microwave Models
Product Description
Restore proper heating performance in your commercial or residential microwave with the XPHVP-16 Microwave Convection Oven High Voltage Diode. This high-quality aftermarket diode replaces TurboChef 100481 and is engineered to handle the elevated heat and voltage levels found in high-speed ovens and convection microwave systems. A failing HV diode can cause the microwave to run without heating, blow fuses, or produce loud humming sounds. Installing this XPHVP-16 diode restores safe high-voltage operation and consistent heating.
Replaces Part Numbers
XPHVP-16, TurboChef 100481, HV07-16, HVP-16, TBC100481, CKTE100481 equivalent high-voltage microwave diodes.
Compatibility
This aftermarket high-voltage diode replaces TurboChef 100481 and fits many commercial and household microwave or convection microwave ovens, including:
Fits specific TurboChef models including Bullet, ECO ST, Encore, Encore 2, G5, I3, NGC, NGC2, NGO, Sota/I1, TORNADO 2, i5.
Typical compatible equipment includes:TurboChef High-Speed Ovens, and other convection microwave systems requiring a 12–16kV diode.
Always verify electrical specifications before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to replace TurboChef 100481 and match OEM electrical performance
🔥 High-Heat & High-Voltage Rated – Built for demanding commercial microwave environments
💰 Cost-Effective Commercial Repair – A reliable alternative to costly OEM replacement parts
🛡️ Solves Common Issues – Fixes no-heat conditions, humming, blown fuses, and weak heating output
📐 Product Specification
Part Number: XPHVP-16
Replaces: TurboChef 100481
Component Type: High Voltage Rectifier Diode
Voltage Rating: 12–16 kV peak
Current Rating: Max. Forward Current 750MA
Polarity: Standard microwave HV polarity (stripe = cathode)
Material: Heat-resistant high-voltage diode with insulated leads
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Screwdriver, insulated gloves, needle-nose pliers
⚠️ Safety First: Microwave and commercial oven repairs involve dangerously high voltage even when unplugged. Only qualified technicians should replace HV components.
Steps (for trained professionals):
Disconnect power and properly discharge the HV capacitor.
Remove the microwave or oven’s service cover.
Locate the HV diode near the capacitor and transformer.
Remove the old diode and install the new XPHVP-16, ensuring correct polarity.
Reassemble unit and test heating performance.
⏱️ Time Required: 20–30 minutes (professional repair recommended)
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance & Commercial Equipment Parts Supplier
🔄 30-Day Return Policy
Restore powerful, consistent heating — Add to Cart Now for a reliable and cost-effective replacement!
Genuine OEM W11613295 Refrigerator Condenser Fan Motor
The Genuine OEM Whirlpool W11613295 is the condenser fan motor for select Whirlpool, Maytag, Kenmore and KitchenAid refrigerators. The motor runs when the compressor runs, pulling air across the condenser coils to cool the compressor and the coils. When it fails or its bearings wear out, the refrigerator may get noisy or warm up.
This is the original Whirlpool part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering.
Quick Answer
The Genuine OEM W11613295 Condenser Fan Motor replaces the condenser fan motor on a compatible refrigerator when it has failed. Replaces W11387394, W11123104, W10239053, WPW10239053, W10609117, W11117459, W10909377, W11373924, W11505534, 12825101 and 8208221. Classic symptoms: the refrigerator is noisy, or the fridge and freezer are too warm.
Common Problems This Part Fixes
Noisy refrigerator, such as a rattling or vibrating condenser fan
Refrigerator or freezer too warm, or not cooling
Fan not running or the motor overheating
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This condenser fan motor replaces or supersedes the following part numbers:
W11613295, W11387394, W10239053, W10609117, W11117459, W11123104, WPW10239053, 12825101, W10909377, W11373924, W11505534, FDQR107WD, UDQR107A1, FDQG107W2, 81623ZT, 115V-60HZ 3.0W E.P., AP7196151, AWP45631, PD00083292
If your old motor shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This condenser fan motor is listed for frost-free refrigerators from Whirlpool, Maytag, Kenmore and KitchenAid.
Note: Retailers show different model lists for the numbers this motor replaces, so we have not published a model list here. Check your full model number against your parts diagram, or contact our support team and we'll verify fit before you order.
Key Features
Genuine OEM Whirlpool part, not an aftermarket equivalent
Pulls air across the condenser coils to cool the compressor and coils
Replaces eleven earlier Whirlpool motor part numbers
Sold individually
Product Specifications
Part Number
W11613295
OEM Part Number
W11613295
Part Type
Refrigerator Condenser Fan Motor
Condition
Genuine OEM
Manufacturer
Whirlpool
Quantity
1 Motor
Application
Select Whirlpool-Built Refrigerators
Installation Notes
⚠️ Disconnect Power Before Installing Unplug the refrigerator before you begin. The motor is at the back or bottom of the refrigerator near the condenser coils, so you will need to pull the refrigerator out and remove the back panel. Unplug the motor's electrical connector, remove the screws or brackets holding the old motor, and take it out. Install the new motor and secure it, reconnect the connector, and replace the back panel. Restore power and check that the fan runs quietly.
Frequently Asked Questions
My refrigerator is noisy or too warm. Is this the part I need?
It can be. Check for dirt on the condenser coils and for anything blocking the fan blade first. If the fan doesn't turn freely or the bearings are noisy, replace the motor.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent.
Does this replace my old motor number?
It replaces W11387394, W11123104, W10239053, WPW10239053, W10609117, W11117459, W10909377, W11373924, W11505534, 12825101 and 8208221. If your motor shows another number, contact our support team and we'll check it.
Will this fit my refrigerator?
It is listed for many Whirlpool-built refrigerators. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Whirlpool OEM Part
Whirlpool W10918010 Refrigerator Door Closer - Gray (Right Hand)
Right-hand gray refrigerator door closer for the door hinge and closing assembly.
Quick Answer
W10918010 is a genuine Whirlpool OEM right-hand gray refrigerator door closer. It works with the door hinge and closure mechanism to help guide the refrigerator door into its proper closed position and replaces earlier part number W10833739.
Product Description
The W10918010 door closer works with the refrigerator door hinge and closing mechanism to guide the right-hand fresh-food door through the final portion of its closing movement. The shaped closer surface helps the door settle into its intended closed position as the hinge moves.
A cracked or worn closer can cause the door to close unevenly, need extra force near the end of travel, or fail to settle into position correctly. A door that remains partially open can allow cold air to escape, which may contribute to temperature problems, condensation, frost, and longer compressor run time.
Symptoms This Part Fixes
Right-hand refrigerator door does not close smoothly
Door needs an extra push near the fully closed position
Door feels uneven or shifts as it closes
Auto-closing action is weak or inconsistent
Original closer is visibly cracked, worn, or broken
Door does not settle securely into its normal closed position
Replaces Part Numbers
Use these verified numbers to identify the correct replacement:
W10918010, W10833739, 4461321, AP6038208, AWP42677, EAP11770045, PD00073761, PS11770045
Cross-reference numbers are listed for identification only. This listing ships the genuine Whirlpool OEM part.
Compatibility
Fits select Whirlpool-built refrigerators that specify part number W10918010, including the following verified model examples:
WRF532SNHZ06 · JFC2089BEP07 · MFC2062FEZ08 · WRF535SMHZ06 · KRFF302ESS05 · MFI2570FEZ12 · WRF535SWHZ06 · KRFF302EWH04 · WRFA35SWHZ06 · WRF535SMHZ07
⚠️ Important: This is the right-hand gray door closer. Always verify your refrigerator's complete model number, door side, and original part number before ordering. Contact our support team if you're unsure.
Key Features
Genuine Whirlpool OEM replacement part
Manufacturer part number W10918010
Right-hand refrigerator door position
Gray finish
Replaces previous part number W10833739
Designed for the refrigerator door closing and hinge assembly
Product Specifications
Part Number
W10918010
Brand
Whirlpool
Part Type
Refrigerator Door Closer
Assembly
Refrigerator Door / Hinge Closing Assembly
Position
Right Hand
Color
Gray
Function
Helps guide the refrigerator door into the closed position
Part Quality
Genuine Whirlpool OEM
Condition
New
Installation Notes
Disconnect refrigerator power before service.
Support the refrigerator door before loosening or removing hinge-related hardware.
Confirm that the existing closer is on the right-hand side and matches W10918010 or previous part number W10833739.
Inspect the closer, hinge, mounting points, and nearby hardware for cracks, wear, looseness, or deformation.
Remove the original closer while noting its installed position and orientation.
Install W10918010 in the same right-hand position.
Reassemble the hinge hardware and verify that the door opens, aligns, and closes normally.
⚠️ Diagnostic tip: Poor door closing can also be caused by worn hinge components, loose hardware, cabinet leveling problems, or gasket interference. Inspect the complete door system before replacing only the closer.
Frequently Asked Questions
What does Whirlpool W10918010 do?
W10918010 is the right-hand refrigerator door closer. It works with the door hinge and closing mechanism to help guide the door through the final portion of its travel and into the proper closed position.
Is W10918010 a genuine Whirlpool OEM part?
Yes. W10918010 is documented as a genuine Whirlpool OEM refrigerator door closer. It is also used on select Whirlpool-built appliance brands and models.
How can I check whether the door closer is actually damaged?
Open the right-hand refrigerator door and slowly move it through the final portion of closing while watching the lower hinge and closer area. If the closer is visibly cracked, broken, deformed, loose, or fails to move smoothly while the hinge hardware remains secure, the closer may need replacement.
Does the right-hand position matter?
Yes. W10918010 is specifically identified as the right-hand gray door closer. The matching left-hand closer is a different part, so verify the door side and complete appliance model before ordering.
Why should I match the model number instead of comparing the part visually?
Door closers can look very similar while having different geometry, mounting points, colors, or left/right orientation. Matching the complete refrigerator model and manufacturer part number is more reliable than appearance alone.
What should I inspect while replacing the closer?
Inspect the hinge, mounting hardware, door alignment, and gasket contact while the door is supported. If another closure component is worn or loose, replacing the closer alone may not fully correct the door problem.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XP20AGC Microwave Line Fuse
20A, Glass Fuse
6X32MM
Replaces Part Numbers: 5304509451, 5304464087, 5304488359, 4583647, AP6230606, PS12071294, WB27X11138, 1810711, 261201200040, AH3486694, EA3486694, AP4980426, PS3486694.
Description: This Fuse is a replacement part for select microwave models. It's a critical safety component designed to protect the microwave from electrical overload by breaking the circuit if the current is too high. This fuse is specifically tailored to fit and function properly with Frigidaire microwave models, ensuring safety and reliability.
XPARTCO WB02X10646 Hood Line Fuse
The replacement WB02X10646 Hood Line Fuse is designed for select GE range hood models. This fuse protects the hood’s electrical system (e.g., fan or light circuits) from power surges or faults. Ideal for restoring functionality to GE appliances experiencing hood-related power issues, such as fan or light failures.
Note: Disconnect power before installation. Verify voltage and amperage compatibility with your appliance model.
Replaces part numbers: WB02X10646, 873971, AH223926, EA223926, WB02X10584, WB2X10584, WB2X10646, AP3423517, PS223926.
Compatibility (WB02X10646):
Compatible with select GE microwave and range hood models, including but not limited to:
GE: JVM series, Profile, Cafe, Monogram (specific models pending verification)
Verify your model number or contact our support team for assistance.
Key Features (WB02X10646):
✅ Brand Compatibility: Fits select GE microwave and range hood models.
🔥 Specifications: Replacement hood line fuse, specifications vary by model (typically 125V–250V, verify amperage), heat-resistant.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes.
🛡️ Reliable Fixes: Addresses hood-related issues like fan or light not working.
Installation Notes (WB02X10646):
Safety First: Disconnect the appliance from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or hood running today!
Add to cart now for a budget-friendly fix!
Genuine OEM 6201EC1006T Washer Noise Filter
The Genuine OEM LG 6201EC1006T is the noise filter for select LG washers. It filters the electrical power coming into the washer, reducing electrical noise and helping protect the control board from interference and power surges. Replace it when the washer has no power or intermittent power, or shows signs of a failed filter.
This is the original LG part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering, because LG uses a similar filter with a different part number on other models.
Quick Answer
The Genuine OEM 6201EC1006T Washer Noise Filter replaces a failed noise filter on a compatible LG washer. Replaces 6201EC1006A, 6201EC1006L and 6201EC1006Q. Classic symptoms: the washer has no power or loses power intermittently, or you hear increased buzzing.
Common Problems This Part Fixes
Washer has no power
Intermittent power or power fluctuations
Washer won't start
Increased buzzing or electrical noise
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This noise filter replaces or supersedes the following part numbers:
6201EC1006T, 6201EC1006L, 6201EC1006U, 6201EC1007B, 2226388, 6201EC1006A, 6201EC1006E, 6201EC1006Q, 6201EC1006W, AH3528920, EA3528920, ALG51983, AP5251356, EAP3528920, PD00001858, PS3528920
If your old filter shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This noise filter is listed for LG washers, including these examples:
LG WM3455HS, WM3455HW, WM3987HW, WM3677HW
LG WM2301HR, WM2301HW, WM2350HRC, WM3431HS
LG WM3997HVA, WM2277HB, WM2032HW, WM0642HW
Note: The models above are a sample, not a full list, and some retailers also list this part for certain LG dishwashers and Kenmore models. Look-alike filters such as 6201EC1006U are sold under different part numbers. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM LG part, not an aftermarket equivalent
Filters incoming power to reduce electrical noise
Helps protect the control board from interference and surges
Replaces three earlier LG filter part numbers
Sold individually
Product Specifications
Part Number
6201EC1006T
OEM Part Number
6201EC1006T
Part Type
Washer Noise Filter
Condition
Genuine OEM
Manufacturer
LG
Quantity
1 Filter
Application
Select LG Washers
Installation Notes
⚠️ Unplug The Washer First Unplug the washer before you start. Take a photo of the wiring connections before disconnecting anything, then transfer the connectors to the new filter in the same positions and secure it. If the washer still has no power after the replacement, the cause may be another component such as the power or main control board or a damaged wiring harness.
Frequently Asked Questions
My LG washer has no power. Is this the fix?
Possibly. A failed noise filter can cut power to the washer, but a bad power or control board or damaged wiring can cause the same symptom, so check those too.
Is this an OEM or aftermarket part?
This is a genuine OEM part from LG, not an aftermarket equivalent.
Is this a control board?
No. It is a noise filter that sits in the washer's power supply and helps protect the control board. It does not replace the main control board.
Will this fit my washer?
It is listed for many LG washers, but the model list above is only a sample and some models use a different filter. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM DA82-01415A Refrigerator Water Leakage Repair Kit
The Genuine OEM Samsung DA82-01415A is a water leakage repair kit (also sold as a water leak service kit) for select Samsung bottom-freezer and French door refrigerators. It addresses water leaking from the defrost drain, where a frozen or poorly sealed drain lets ice build up on the evaporator and meltwater overflow under the crisper drawers. The kit includes a replacement drain tube with cap and foam sealing pieces for the evaporator drain plate.
This is the original Samsung part, not an aftermarket equivalent. It is sold as a kit. Check your model number before ordering.
Quick Answer
The Genuine OEM DA82-01415A Water Leakage Repair Kit repairs the defrost drain on a compatible Samsung refrigerator that is leaking water. Classic symptoms: water pooling at the bottom of the refrigerator or under the crisper drawers, frost building up on the evaporator, or a frozen drain tube.
Common Problems This Kit Fixes
Water pooling at the bottom of the refrigerator or under the crisper drawers
Condensate leaking around the evaporator
Excess frost forming on the evaporator cover
Frozen or iced-over defrost drain tube
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water leakage repair kit is listed under the following part number:
DA82-01415A replaces DA62-03441A, 3436781, AP5957964, ASM31603, EAP10058968, PD00024858, PS10058968
If your old kit shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This kit is listed for Samsung bottom-freezer and French door refrigerators with dual evaporators. Retailers do not publish a full model list for this kit.
Note: Samsung sells similar-looking leak kits and drain parts under different part numbers, and newer refrigerators may already have a factory-installed drain tube. Send us your full model number, or check it against your parts diagram, and we'll verify fit before you order.
Key Features
Genuine OEM Samsung part, not an aftermarket equivalent
Replacement defrost drain tube with cap
Foam sealing pieces for the evaporator drain plate
Sold as a kit
Product Specifications
Part Number
DA82-01415A
OEM Part Number
DA82-01415A
Part Type
Refrigerator Water Leakage Repair Kit
Condition
Genuine OEM
Manufacturer
Samsung
Quantity
1 Kit
Application
Select Samsung Bottom-Freezer and French Door Refrigerators
Installation Notes
⚠️ Disconnect Power Before Installing Unplug the refrigerator and remove any food that could spoil. Remove the evaporator cover and check that the defrost heater and defrost sensor work, because a failed heater or sensor will cause the drain to freeze again. Take care when moving the evaporator and drain plate, because damage to the evaporator coil can ruin the sealed system. Fit the new drain tube and foam seals, put the cover back, and fully thaw any ice in the drain before you restore power. Reviewers suggest having Phillips and flat-head screwdrivers and pliers on hand and consulting your model's service manual.
Frequently Asked Questions
My refrigerator is leaking water. Is this kit the fix?
It can be, if the leak comes from a frozen or poorly sealed defrost drain. Before buying, check that the defrost heater and defrost sensor work, because a failed heater or sensor can cause the same leak.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Samsung, not an aftermarket equivalent.
What is in the kit?
It includes a replacement drain tube with cap and foam sealing pieces for the evaporator drain plate. Retailers describe the full contents differently, so contact our support team if you need to confirm them before ordering.
Will this fit my refrigerator?
It is listed for Samsung bottom-freezer and French door refrigerators with dual evaporators, but no model list is published. Send us your full model number, or check it against your parts diagram, and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH23X29940 Washer Cold Water Inlet Valve
The Genuine OEM GE WH23X29940 is the cold water inlet valve for select GE washers and laundry centers. It controls the flow of cold water into the washer. When the valve fails, the washer may not fill with cold water, may not fill at all, or may leak at the valve.
This is the original GE part, not an aftermarket equivalent. It is sold individually and is the cold water valve only. The hot water valve is a separate part, so check your model number and parts diagram before ordering.
Quick Answer
The Genuine OEM WH23X29940 Washer Cold Water Inlet Valve replaces a worn or failed cold water valve on a compatible GE washer. Classic symptoms: the washer won't fill with cold water or fills slowly, or water leaks at the valve.
When To Replace This Part
Washer doesn't fill with cold water
Washer fills slowly or not at all
Water leaks at the valve
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Part Number
This cold water inlet valve is GE part number:
WH23X29940 replaces AGE26167, AP6981903, EAP12743644, PD00077928, PS12743644
If your old valve shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This cold water inlet valve is listed for select GE laundry centers and washers, including these examples:
GE GFQ14ESSN0WW, GFQ14ESSN1WW
Note: The models above are a sample, not a full list. GE sells other water valves, including hot water valves such as WH23X29538, under different part numbers. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Cold water inlet valve for select GE washers and laundry centers
Sold individually
Product Specifications
Part Number
WH23X29940
OEM Part Number
WH23X29940
Part Type
Washer Cold Water Inlet Valve
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Valve
Application
Select GE Washers and Laundry Centers
Installation Notes
⚠️ Unplug The Washer And Shut Off The Water Unplug the washer and shut off the hot and cold water supplies before you start. Water can remain in the hoses and valve, so have towels ready. Take a photo of the hose and wiring connections before disconnecting anything, then transfer them to the new valve in the same positions. Turn the water back on slowly and check for leaks before using the washer.
Frequently Asked Questions
My washer isn't filling with cold water. Is the valve the fix?
Possibly. A failed cold water valve can cause it, but a clogged valve screen, a closed supply faucet or a wiring or control problem can too, so check those first.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
Is this the hot or cold water valve?
This is the cold water inlet valve. The hot water valve is a separate part with a different part number.
Will this fit my washer?
It is listed for select GE washers, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH13X28339 Washer Cold Water Inlet Valve
The Genuine OEM GE WH13X28339 is the cold water inlet valve for select GE washers. It controls the flow of cold water into the washer. When the valve fails, the washer may not fill with cold water, may not fill at all, or may leak at the valve.
This is the original GE part, not an aftermarket equivalent. It is sold individually and is the cold water valve only. The hot water valve is a separate part (for example WH13X28374), so check your model number and parts diagram before ordering.
Quick Answer
The Genuine OEM WH13X28339 Washer Cold Water Inlet Valve replaces a worn or failed cold water valve on a compatible GE washer. Classic symptoms: the washer won't fill with cold water or fills slowly, or water leaks at the valve.
When To Replace This Part
Washer doesn't fill with cold water
Washer fills slowly or not at all
Water leaks at the valve
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Part Number
This cold water inlet valve is GE part number:
WH13X28339 replaces AGE846943, AP6889114, EAP12723091, PD00064396, PS12723091
If your old valve shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This cold water inlet valve is listed for select GE washers.
Note: GE sells other water valves, including hot water valves such as WH13X28374, under different part numbers. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Cold water inlet valve for select GE washers
Sold individually
Product Specifications
Part Number
WH13X28339
OEM Part Number
WH13X28339
Part Type
Washer Cold Water Inlet Valve
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Valve
Application
Select GE Washers
Installation Notes
⚠️ Unplug The Washer And Shut Off The Water Unplug the washer and shut off the hot and cold water supplies before you start. Water can remain in the hoses and valve, so have towels ready. Take a photo of the hose and wiring connections before disconnecting anything, then transfer them to the new valve in the same positions. Turn the water back on slowly and check for leaks before using the washer.
Frequently Asked Questions
My washer isn't filling with cold water. Is the valve the fix?
Possibly. A failed cold water valve can cause it, but a clogged valve screen, a closed supply faucet or a wiring or control problem can too, so check those first.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
Is this the hot or cold water valve?
This is the cold water inlet valve. The hot water valve is a separate part with a different part number.
Will this fit my washer?
It is listed for select GE washers, but we do not have a complete model list. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH13X28374 Washer Hot Water Inlet Valve
The Genuine OEM GE WH13X28374 is the hot water inlet valve for select GE washers. It controls the flow of hot water into the washer, which the washer uses to fill and to reach the right wash temperature. When the valve fails, the washer may not fill with hot water, may not fill at all, or may leak at the valve.
This is the original GE part, not an aftermarket equivalent. It is sold individually and is the hot water valve only. The cold water valve is a separate part, so check your model number and parts diagram before ordering.
Quick Answer
The Genuine OEM WH13X28374 Washer Hot Water Inlet Valve replaces a worn or failed hot water valve on a compatible GE washer. Classic symptoms: no hot water or water that won't fill, or water leaking at the valve.
When To Replace This Part
Washer doesn't fill with hot water
Washer fills slowly or not at all
Water leaks at the valve
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Part Number
This hot water inlet valve is GE part number:
WH13X28374, 4977547, AGE26378, AP6889115, EAP12723092, PD00064395, PS12723092
If your old valve shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This hot water inlet valve is listed for select GE washers, including these examples:
GE GFQ14ESSN0WW, GFQ14ESSN1WW
GE GFW148SSM0WW, GFW148SSM1WW
GE QFW150SSN0WW, QFW150SSN1WW
Note: The models above are a sample, not a full list. GE sells other water valves, including cold water valves, under different part numbers. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Hot water inlet valve for select GE washers
Sold individually
Product Specifications
Part Number
WH13X28374
OEM Part Number
WH13X28374
Part Type
Washer Hot Water Inlet Valve
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Valve
Application
Select GE Washers
Installation Notes
⚠️ Unplug The Washer And Shut Off The Water Unplug the washer and shut off the hot and cold water supplies before you start. Water can remain in the hoses and valve, so have towels ready. Take a photo of the hose and wiring connections before disconnecting anything, then transfer them to the new valve in the same positions. Turn the water back on slowly and check for leaks before using the washer.
Frequently Asked Questions
My washer isn't filling with hot water. Is the valve the fix?
Possibly. A failed hot water valve can cause it, but a clogged valve screen, a closed supply faucet or a wiring or control problem can too, so check those first.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
Is this the hot or cold water valve?
This is the hot water inlet valve. The cold water valve is a separate part with a different part number.
Will this fit my washer?
It is listed for select GE washers, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
