ERP DC97-05280S Washer Suspension Rod
Replaces Part Numbers: DC97-05280S, 3998020, AP5799907, PS8764053
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP WD12X10277 Dishwasher Lower Dish rack Roller Axle
Single Pack
Gray Color
Replaces Part Number: WD12X10277, WD12X10075, WD12X10101, WD12X10126, WD12X10261
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WD19X25278 Dishwasher Genuine OEM Diverter Assembly
Replaces Part Numbers: WD19X25278, WD18X21678, 4922277, WD00X25260, AP6871922, PS12710077.
Description: This Diverter Valve Assembly Kit serves a Genuine OEM replacement Part for specific GE dishwasher models. Its key function is to provide an alternative passage for water to reach the upper spray arms of the dishwasher. A faulty or damaged diverter valve often manifests as water leaks within the dishwasher. When such leaks occur and can be traced back to the diverter valve, this assembly kit offers a comprehensive solution. It includes all necessary components and fasteners to efficiently replace the valve. This kit is suitable for use with specific General Electric dishwasher models.
ERP DC97-16350C Washer Suspension Support Rod - Compatible with Samsung Washers
Product Description
Stabilize your washer with the replacement DC97-16350C Washer Suspension Support Rod. This replacement suspension rod and spring assembly is designed for select Samsung top-load washers, supporting the washer tub to minimize vibration and noise during operation. It addresses issues like excessive shaking, off-balance drums, or "DC" error codes, offering a cost-effective alternative to OEM parts.
Note: Includes one suspension rod and spring assembly (approximately 25.6" long). Sold individually; recommend replacing all four rods for optimal performance. Disconnect power before installation. Verify compatibility with your washer model.
Replaces part numbers: DC97-16350C, DC97-16350J, 3282689, DC97-05280K, PD00007282, EAP4221572, AP5623264, PS4221572.
Compatibility:
Compatible with models including but not limited to:
Samsung: WA400PJHDWR/AA-01, WA400PJHDWR/AA-02, WA400PJHDWR/AA-03, WA422PRHDWR/AA-00, WA422PRHDWR/AA-01, WA422PRHDWR/AA-02, WA45H7000AW/A2, WA45M7050AW/A4
Other brands: Select models requiring DC97-16350C
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung top-load washers requiring DC97-16350C.
🔥 Specifications: Replacement suspension rod and spring assembly, approximately 25.6" long, designed to absorb shock and reduce vibration.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 10–15 minutes per rod.
🛡️ Effective Fixes: Resolves excessive shaking, off-balance drums, noise, or "DC" error codes.
Product Specification
Part Number: DC97-16350C
Component Type: Washer suspension support rod and spring assembly
Material: Durable ABS plastic and metal with high-tension spring
Dimensions: Approximately 25.6" L (rod and spring assembly)
Operating Conditions: Suitable for high-vibration washer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source before installation.
Tools Needed: Phillips screwdriver, work gloves, optional pliers.
Process: Access the washer tub, remove the old suspension rod, and install the new one, ensuring secure attachment to the tub and base.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
PK136277-1 Lower Dishrack Roller and Axle Set
Single Pack
Replaces part Numbers: WD12X10136, WD12X10277
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
17438100000436 Combo Washer / Dryer Genuine OEM Heating Element
Genuine OEM heating element designed for select Midea and Magic Chef combo washer / dryer units to restore proper drying heat.
✓ Genuine OEM Part ✓ Replaces 17438100000436 ✓ Compatibility Support
Product Description
The 17438100000436 Combo Washer / Dryer Genuine OEM Heating Element is designed for select Midea and Magic Chef combo washer / dryer units. This heating element produces heat during the drying cycle and helps restore proper drying performance.
A failed heating element can cause no heat, long drying times, damp clothes after the cycle, or inconsistent drying temperature.
Quick Answer
If your Midea or Magic Chef combo washer / dryer is not heating, takes too long to dry, or leaves clothes damp after the drying cycle, the 17438100000436 heating element may need replacement.
⚠️ Always verify your combo washer / dryer model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Combo washer / dryer not heating
Clothes still damp after drying cycle
Drying cycle takes too long
Inconsistent drying temperature
Failed or burned-out heating element
Replaces part Number
17438100000436, AP7157526, AP6984785, PS18188537
Compatibility
This genuine OEM heating element fits select Midea and Magic Chef combo washer / dryer models using part number 17438100000436.
Always verify your combo washer / dryer model number before ordering. Contact our support team if you’re unsure.
Key Features
Genuine OEM heating element
Designed for select Midea and Magic Chef combo washer / dryer units
Helps restore proper drying heat
Supports reliable drying cycle performance
Direct replacement component for compatible models
Product Specifications
Brand
Midea / Magic Chef
Part Type
Combo Washer / Dryer Heating Element
Primary Part Number
17438100000436
Compatible Appliance Type
Combo Washer / Dryer
Condition
Genuine New
Installation
Disconnect power before installation. Inspect wiring, thermal fuse, thermostat, airflow path, and related heating components before testing appliance operation.
Troubleshooting Guide
⚠️ Disconnect power before servicing the appliance.
Check for lint buildup or airflow restrictions before replacing the heating element.
Inspect the heating element for visible breaks, burns, or damage.
Check related thermostats, thermal fuse, and wiring connections.
Replace the heating element if no-heat or poor drying problems continue.
When Should You Replace This Part?
Replace the heating element if the Midea or Magic Chef combo washer / dryer does not heat, takes too long to dry, leaves clothes damp, or shows signs of a burned-out heating element.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Genuine Parts ✓ Compatibility Support ✓ Secure Checkout
```
XPARTCO WE01X24552 Dryer Timer Knob - Compatible with GE Dryers
Product Description
Restore your dryer’s functionality with the WE01X24552 Dryer Timer Knob from Parts-O-Matic. This high-quality replacement knob is designed for select GE dryer models, enabling precise control of settings such as cycle type, temperature, or start/stop functions. Crafted from durable, impact-resistant plastic with a secure D-shaped stem, it ensures a reliable fit for worn, cracked, or missing knobs.
Note: Always disconnect power before installation. Verify model compatibility with your dryer.
Replaces Part Numbers: WE01X24552, 4396547, AP6026722, AGE25750, EAP11736611, OEM18080175, PD00041231, PS11736611.
Compatibility
Compatible with GE dryer models, including but not limited to:
GTD42EASJWW
GTD65EBSJWS
GTD33EASKWW
GTX42EASJWW
Verify your model number using the dryer’s manual or contact Parts-O-Matic support for assistance.
Key Features
✅ Brand Compatibility: Specifically designed for select GE dryer models.
🔥 Specifications: Made of durable plastic, D-shaped stem, matte white or chrome finish (color may vary), dimensions approximately 2.5" diameter x 1.2" height.
💰 Cost-Effective: Offers OEM-equivalent performance at a budget-friendly price.
🛠️ Easy Installation: Tool-free installation, completes in 2–5 minutes.
🛡️ Reliable Fixes: Resolves issues with broken, stripped, or non-functional knobs.
Installation Instructions
Safety First: Unplug the dryer from the power source to prevent electrical hazards.
Gently pull the old knob straight off the control shaft. Use a flat head screwdriver to pry if needed, but avoid excessive force.
Align the WE01X24552 knob’s D-shaped stem with the control shaft and push firmly until secure.
Test the knob by turning it to confirm proper engagement with dryer settings.
Estimated Time: 2–5 minutes
Product Specifications
Material: High-impact plastic
Color: Matte white or chrome (varies by model)
Dimensions: 2.5" diameter x 1.2" height (approximate)
Weight: 0.5 oz
Stem Type: D-shaped for secure fit
SKU: REP-WE01X24552
8269144A Dishwasher Genuine Drain Hose Extension
Replaces Part Number: 8269144A, 1489097, 8269144, AH2358130, EA2358130, AP4399659, PS2358130.
Description: This Drain Hose is a Genuine OEM part for select Whirlpool dishwasher models. This flexible hose is designed to carry waste water from the dishwasher to the kitchen drain system or garbage disposal, ensuring that the dishwasher drains properly after each wash cycle. Common causes of damage to the Drain Hose often involve regular wear and tear, bending or kinking of the hose during installation or maintenance activities, or deterioration over time due to exposure to hot water and detergents.
WR60X10257 (OE) Refrigerator Evaporator Fan Motor
The WR60X10257 is an OE (Original Equipment) evaporator fan motor, also known as an AC/DC fan motor, for GE and Hotpoint refrigerators. Located at the back of the freezer, this motor circulates air across the evaporator coils, which convert refrigerant into cooling capacity — the fan is what carries that cold air into both the freezer and fresh food compartments.
Rated 115V, 60Hz, 2.4W. Common failure causes include worn motor bearings and general electrical wear. A failing motor produces a recognizable symptom: the freezer may stay reasonably cold while the fresh food section runs warm, since the fresh food compartment depends entirely on this fan to receive circulated cold air. Other symptoms include unusual noise from the freezer or inconsistent cooling overall. It directly replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, and PD00028496.
Quick Answer
The WR60X10257 (OE) Refrigerator Evaporator Fan Motor fixes GE and Hotpoint refrigerators where the freezer stays cold but the fresh food section runs warm, there's unusual noise from the freezer, or cooling is inconsistent. 115V, 60Hz, 2.4W. Replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, PD00028496. This is a 115V AC-powered motor — a different design from the 9.75V DC evaporator fan motors in our WR60X10074, WR60X10185, and WR60X10318 listings. Always match your original motor's voltage type before ordering.
Common Problems This Part Fixes
Freezer stays cold but the fresh food compartment runs warm
Refrigerator or freezer sections too warm overall
Unusual noise — humming, buzzing, or grinding — coming from the freezer
Inconsistent or fluctuating refrigerator temperatures
Refrigerator running constantly as it struggles to maintain temperature
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
What Is an OE Part?
OE (Original Equipment) means this part is manufactured by the same original supplier that produces the Genuine OEM version — identical fit, materials, and performance. The only difference is packaging: OE parts ship under our XPARTCO brand rather than the appliance manufacturer's branded box, which is why they can't be listed as Genuine OEM. You get factory-original quality at a more affordable price.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10257, 1373246, 200D5001P003, UDQR002GNL, WR60X10129, AP4318644, EAP1766252, PS1766252, AGE29237, PD00028496
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Haier, Monogram, and Café refrigerators built on the GE platform, including model numbers such as ETS22SBPARBS, ETS22SBSARSS, and GTS22FBPBRWW.
Note — 115V AC, not 9.75V DC: This motor is a different design and voltage class from the DC evaporator fan motors used on other GE refrigerator platforms, including our WR60X10074, WR60X10185, and WR60X10318 listings (all 9.75V DC). Check your old motor's voltage rating, printed on the motor itself, before ordering — a DC motor and this AC motor are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
OE (Original Equipment) evaporator fan motor, also known as an AC/DC fan motor
Circulates air across the evaporator coils to cool the freezer and fresh food compartments
Resolves "freezer cold but fridge warm," "unusual noise," and "inconsistent cooling" symptoms caused by fan motor failure
Rated 115V, 60Hz, 2.4W
Direct drop-in replacement matching the original mounting and blade fitment
Replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, and PD00028496
Compatible with GE, Hotpoint, Haier, Monogram, and Café refrigerators
OE (Original Equipment) — manufactured by the same original supplier as the Genuine OEM part
Product Specifications
Part Number
WR60X10257-OE
Part Type
Refrigerator Evaporator Fan Motor
Designation
OE (Original Equipment)
Compatible Brand
GE
Location
Back of the freezer, over the evaporator coils
Voltage
115V AC
Frequency
60 Hz
Wattage
2.4 W
Dimensions
4"H x 2-3/4"W x 17"D
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10257 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My freezer is cold but the fridge section is warm. Is this the right part?
Yes, this is a very common and telling symptom pattern. The freezer sits close to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on this fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area.
How do I know if I need this 115V motor or one of your DC motors?
Check the voltage rating printed directly on your old motor before ordering. This WR60X10257 is a 115V AC-powered motor, while our WR60X10074, WR60X10185, and WR60X10318 listings are all 9.75V DC motors used on different GE refrigerator generations. The two motor types are not interchangeable, so matching the voltage rating on your original motor is the most reliable way to confirm which one you need.
Is this a genuine OEM part?
This is an OE (Original Equipment) part sold under our XPARTCO brand. OE parts are manufactured by the same original supplier that produces the Genuine OEM part, so the fit, materials, and performance are identical — the difference is that OE parts ship in XPARTCO packaging rather than the appliance manufacturer's branded box, which is why we can't list them as Genuine OEM. This gives you factory-original quality at a more affordable price than the branded version.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
8540101CM Washer Drive Belt
Washing machine inner tub drive belt
6 Rib, 51.33"
Description: The Drive Belt is a replacement for specific Whirlpool, Maytag, Kenmore washer models. It transmits power from the washer motor to the tub, causing it to rotate during wash and spin cycles Causes of a worn drive belt can include repetitive cycles over years of use. The belt undergoes stress each time the tub is set in motion. Damage from slipping off pulleys during operation can also affect the belt.
Replaces Part NumbersWP8540101, 8540101, 8540348, AP6013037, PS11746258
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
WD21X10224 Genuine GE / Hotpoint Dishwasher Interlock Switch
Replaces Part Numbers:AP3872949, 1168295, AH1021382, EA1021382, PS1021382
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
