W10518394 Genuine OEM Whirlpool Dishwasher Heating Element
The W10518394 is a Genuine OEM Whirlpool replacement dishwasher heating element compatible with select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore Whirlpool-built dishwashers — including the WDF, WDT, ADB, and related series. The heating element is mounted at the bottom of the dishwasher tub and serves two purposes: it heats the wash water to the temperature required by the selected cycle (improving cleaning performance and helping detergent dissolve and work effectively), and it provides drying heat at the end of the cycle to evaporate moisture from dishes during the heated dry phase. When the element fails, dishes come out wet, glassware is spotted or cloudy, and wash performance noticeably degrades.
This is an oval-shape element rated 1200W, approximately 15"L x 3"W x 3"H. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the W10518394 directly replaces W10518394VP, W10134009, W10441445, 8194250, 8563007, 8563464, 8572861, 2977737, 1381534, 8268559, A3-06, AP4325066, AP5690151, EAP9605070, PD00012075, PS1960583, and PS9605070. The element mounts to the bottom of the tub with large nuts on the underside — the rubber washer (Whirlpool 717273) and heater nut (Whirlpool 8268548) are sold separately if they need replacement. Important: after installation on most Whirlpool dishwashers, you must run the diagnostic mode to reset the control board to recognize the new element. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The W10518394 Genuine OEM Whirlpool Dishwasher Heating Element fixes Whirlpool, Maytag, KitchenAid, Amana, and Kenmore dishwashers where dishes come out wet, glassware is spotted, wash water isn't getting hot, or the heated dry phase isn't working. Oval shape, 1200W, ~15"L x 3"W x 3"H. Genuine OEM. Replaces W10518394VP, W10134009, W10441445, 8194250, 8563007, 8563464, 8572861, 2977737, AP4325066, AP5690151, PS1960583, PS9605070. Diagnostic reset required on most Whirlpool dishwashers after installation. Rubber washer (717273) and heater nut (8268548) sold separately if needed.
Common Problems This Part Fixes
Dishes coming out wet at the end of the cycle — element not providing heat for the drying phase
Wash water not getting hot enough — poor cleaning performance even with proper detergent
Glassware coming out cloudy or spotted — water not reaching temperature for proper detergent activation
Heated dry cycle not working — no warm air at the end of the cycle
Element visibly burned through, broken, or showing arcing damage
Multimeter continuity test on the element shows an open circuit (no continuity)
Heating element showing the wrong region glowing red (only a 6" segment heating rather than the whole element)
Detergent not fully dissolving — water too cool to activate the formulation
Replaces Part Numbers
This dishwasher heating element directly replaces the following OEM and cross-reference part numbers:
W10518394, 2977737, 8194250, 8563007, 8572861, W10134009, W10441445, W10518394VP, AWP40983, PD00004893, EAP8260087, AP5690151, PS8260087.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Always confirm the shape and dimensions of your old element match this oval ~15" element before ordering — some Whirlpool dishwashers use a different horseshoe-style element instead.
Compatibility
This dishwasher heating element is compatible with select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore dishwashers, including:
Whirlpool dishwashers — WDF330PAHS, WDF520PADM, WDT720PADM, WDT730PAHZ series and related models
Whirlpool dishwashers — additional WDF and WDT series models (verify with parts diagram)
Maytag dishwashers — select models (verify with parts diagram)
KitchenAid dishwashers — select models
Amana dishwashers — ADB1400AGW and related models
Kenmore / Sears dishwashers — select Whirlpool-built models
Important — Confirm Element Shape Before Ordering: The W10518394 is an oval-shape heating element approximately 15" in length. Some Whirlpool-platform dishwashers use a different horseshoe-style heating element instead, which is NOT interchangeable with this one. Before ordering, visually compare your old element's shape and length to this part, or check your dishwasher's parts diagram to confirm W10518394 is the correct element for your specific model. If your element is horseshoe-shaped, you need a different part number — contact our support team with your model number.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Heats wash water for optimal cleaning performance and provides drying heat during the heated dry phase
Rated 1200W for efficient heating and reliable temperature control
Oval-shape element approximately 15" L x 3" W x 3" H
Mounts in the bottom of the dishwasher tub, secured underneath with large nuts
Note: rubber washer (Whirlpool 717273) and heater nut (Whirlpool 8268548) sold separately if yours need replacement
Diagnostic reset required on most Whirlpool dishwashers after installation (typically pressing any 3 buttons in sequence 3 times)
Replaces 18+ OEM and cross-reference part numbers including W10518394VP, W10134009, W10441445, 8194250, 8563007, 8563464, 8572861, AP4325066, AP5690151, PS1960583, PS9605070
Compatible with Whirlpool WDF and WDT series, Maytag, KitchenAid, Amana ADB1400AGW, and Kenmore Whirlpool-built dishwashers
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
W10518394
Part Type
Dishwasher Heating Element
Condition
Genuine OEM
Application
Dishwashers (Whirlpool platform)
Shape
Oval (NOT interchangeable with horseshoe-style elements)
Wattage
1200W
Dimensions
Approximately 15" L x 3" W x 3" H
Mounting Location
Bottom of dishwasher tub
Related Parts (Sold Separately)
Rubber Washer (717273), Heater Nut (8268548)
Post-Install Step
Diagnostic reset required on most Whirlpool dishwashers
Compatible Brands
Whirlpool, Maytag, KitchenAid, Amana, Kenmore
Installation Notes
⚠️ Unplug Dishwasher and Shut Off Water Before Starting — Don't Touch Element with Bare Hands Disconnect power at the breaker and shut off the water supply at the valve under the sink before beginning. Wear work gloves and safety glasses to protect your hands and eyes. Handle the new heating element only by the metal end terminals or its support brackets — do NOT touch the heating coil itself with bare fingers; skin oils can cause hot spots that shorten element life. From inside the dishwasher tub, the element is visible at the bottom — it's the looped metal coil running along the floor of the tub. Remove the bottom rack and any debris to clear access. To access the wire connections and mounting nuts, you'll need to either reach underneath the dishwasher from the front access panel or, on some installations, pull the dishwasher out partially. From underneath: disconnect the two wires from the bottom of the element terminals (photograph the wire connections first to ensure correct reinstallation). Remove the plastic nuts holding the element terminals in place. From inside the tub, lift the old element straight up and out. Inspect the rubber washers — if they're cracked, hardened, or torn, replace them now with new 717273 washers. Install the new W10518394 element through the same mounting holes, replace the rubber washers if needed, and secure with the plastic nuts (or new 8268548 nuts) from underneath. Reconnect the two wires to the terminals matching your original orientation. Important: after restoring power, run the Whirlpool diagnostic mode to reset the control board — on most models this is done by pressing any three buttons in sequence three times and closing the door, which initiates a ~30-minute diagnostic cycle. The new element will not be recognized by the control until this is done. Tools needed: Phillips screwdriver, 5/8" wrench, 5/16" nut driver, 3/4" wrench, work gloves, safety glasses.
Frequently Asked Questions
Why are my dishes coming out wet — is the heating element the cause?
Most likely, yes — wet dishes are the classic signature of a failed dishwasher heating element. The element provides heat for the dry phase, evaporating moisture from dish surfaces. When it fails, dishes simply air-dry, which leaves them wet (especially plastics and the interior of inverted glassware). To confirm: with the dishwasher unplugged, disconnect the wires from the element and check continuity with a multimeter. A working element shows continuity; a failed element shows an open circuit (infinite resistance). Also check that you have the heated dry option enabled in your cycle settings — some users mistakenly turn off heated dry and then assume the element has failed.
After installing the new element, the dishwasher still isn't heating — why?
On most Whirlpool dishwashers, you must run the diagnostic mode after replacing the heating element so the control board recognizes the new part. To enter diagnostic mode on most Whirlpool models, press any three buttons in sequence three times rapidly, then close the door — this starts a roughly 30-minute diagnostic cycle that resets the heater logic. If you've installed the new element correctly and it still isn't heating after the diagnostic cycle, also check the high-limit thermostat (a safety component that can stop power to the element if it has failed open). Confirm your wire connections are tight on the element terminals as well.
How is the W10518394 different from horseshoe-shape heating elements?
The W10518394 is an oval-shape element about 15" in length. Some Whirlpool-platform dishwashers — even similar-looking models — use a horseshoe-shape element instead, which has a different mounting hole pattern and shape that won't fit positions designed for the oval element. The two are NOT interchangeable. Before ordering, compare your old element to a photo of the W10518394, or check your dishwasher's parts diagram. If your old element is horseshoe-shaped, contact our support team with your model number and we'll help identify the correct horseshoe-style element for your dishwasher.
Do I need to replace the rubber washers and nuts when installing this?
Not always — they're reusable as long as they're in good condition. Inspect the rubber washers (Whirlpool 717273) for cracks, hardening, or tears. If they're brittle or torn, replace them now while you have the element out — they prevent water leaks from the tub at the element mounting points. The plastic heater nuts (Whirlpool 8268548) are usually reusable unless visibly damaged. Both parts are sold separately if you need replacements. Reusing torn rubber washers is the most common cause of leaks after this repair, so don't skip the inspection.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same heating element installed in compatible Whirlpool, Maytag, KitchenAid, Amana, and Kenmore Whirlpool-built dishwashers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11612326 Dishwasher Circulation Pump (OE)
OE-style dishwasher circulation pump designed to move water through the spray arms and restore proper dishwasher wash performance.
✓ Dishwasher Repair Part ✓ Replaces W11612326 ✓ Compatibility Support
Product Description
The XPARTCO W11612326 Dishwasher Circulation Pump moves water through the dishwasher spray arms during the wash cycle. A faulty circulation pump can cause poor cleaning, weak water pressure, unusual pump noise, or incomplete wash performance.
Replacing a failed dishwasher circulation pump can help restore proper water circulation and improve dishwashing results.
What is OE ?: “OE” (Original Equipment) parts are built to the same specifications, materials, and performance standards as the original factory parts. They offer identical fit and function to OEM (Original Equipment Manufacturer) components but are typically sold under independent brands like XPARTCO for better affordability.
Quick Answer
If your dishwasher is not cleaning properly, has weak spray arm pressure, or makes unusual pump noise, the W11612326 circulation pump may need replacement.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not cleaning dishes properly
Weak spray arm water pressure
Water not circulating during wash cycle
Unusual circulation pump noise
Poor dishwasher wash performance
Replaces part Number
W11612326, W10879262, W10805386, W11521435, AP7193729, PS16744934, 4460096, AP6027386, AWP45622, AP16744934, PD00080710, PS11759751.
Compatibility
This part fits select Whirlpool, KitchenAid, Maytag, Amana, and compatible dishwasher models using part number W11612326.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Dishwasher circulation pump replacement
Helps restore proper water circulation
Supports spray arm water pressure
Designed for compatible dishwasher models
“OE” (Original Equipment) parts are built to the same specifications, materials, and performance standards as the original factory parts.
Product Specifications
Brand
XPARTCO
Part Type
Dishwasher Circulation Pump
Primary Part Number
W11612326-OE
Compatible Appliance Type
Dishwasher
Condition
New
Installation
Disconnect power and water supply before installation. Inspect hoses, seals, and wiring connections after installation.
Troubleshooting Guide
⚠️ Disconnect power and water supply before servicing the dishwasher.
Check spray arms and filters for blockage before replacing the pump.
Inspect the circulation pump area for leaks or unusual noise.
Verify wiring connections are secure.
Replace the circulation pump if water circulation problems continue.
When Should You Replace This Part?
Replace the dishwasher circulation pump if the dishwasher has poor cleaning performance, weak spray pressure, unusual pump noise, or water is not circulating during the wash cycle.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ OE-Style Replacement ✓ Compatibility Support ✓ Secure Checkout
Genuine Bosch OEM
Bosch 00640476 Dishwasher Genuine OEM Terminal Box
Original Bosch dishwasher terminal box with terminal block for select Bosch, Thermador, Gaggenau, and Kenmore dishwashers.
Product Overview
The Bosch 00640476 Dishwasher Terminal Box is a genuine OEM electrical connection enclosure used on compatible dishwashers. It houses the terminal block where household electrical power connects to the dishwasher wiring harness.
This assembly is supplied with the terminal block. The separate wiring/terminal-box cover is not included; Bosch identifies the matching cover as part 00640477.
Quick Answer
00640476 is a Genuine Bosch OEM dishwasher terminal box with terminal block. It replaces earlier part 640476. The cover is sold separately as 00640477.
Common Problems This Part May Fix
Dishwasher will not start because of a damaged power connection
Burned, overheated, or melted terminal connections
Loose or damaged line-voltage wiring connection
Damaged terminal block or terminal-box housing
Intermittent power caused by compromised terminal connections
Replaces and Cross-References
00640476, 1378543, 640476, ABS11577, AP3962500, EAP8729475, PD00023793, PS8729475
Cross-reference numbers are provided for identification. Bosch 00640476 is the Genuine OEM part.
Compatibility
Used on select Bosch-built dishwashers sold under Bosch, Thermador, Gaggenau, and Kenmore brands. Verified model examples include:
SHE55C05UC/58
SHE43F15UC/61
SHE4AM16UC/02
SHX3AM06UC/01
SHX3AR56UC/07
S36KMK15UC/05
DWHD410HPR/60
63013903010
63013909012
Important: This is only a partial compatibility list. Bosch uses E-Nr./model revisions, so verify the complete model number including the suffix before ordering.
Key Features
Genuine Bosch OEM replacement part
Includes terminal box and terminal block
Connects household electrical power to dishwasher wiring
Replaces Bosch part 640476
For select Bosch-built dishwasher platforms
Cover 00640477 is sold separately
Product Specifications
Manufacturer Part Number
00640476
Manufacturer
Bosch
Part Type
Dishwasher Terminal Box / Terminal Block Assembly
Condition
New
Part Quality
Genuine OEM
Terminal Block Included
Yes
Cover Included
No
Matching Cover
00640477, sold separately
Application
Select Bosch-built dishwashers
Installation Notes
Shut off the dishwasher circuit breaker and verify power is off before beginning service.
Remove the lower access panel as required for the model.
Photograph and label existing wire connections before disconnecting them.
Inspect supply wiring and the dishwasher harness for heat damage, burned insulation, or loose conductors.
Transfer wiring to the new terminal block according to the dishwasher wiring diagram and installation instructions.
Secure strain relief and wiring so no bare conductor is exposed.
Install the proper terminal-box cover before restoring power.
Electrical safety: This part carries household line voltage. If wiring is burned, melted, or damaged, correct the underlying connection problem and replace damaged wiring as required. Installation should be performed by a qualified person when local electrical codes or conditions require it.
Frequently Asked Questions
Is 00640476 a Genuine Bosch OEM part?
Yes. It is manufactured by Bosch as an original equipment replacement terminal box.
Does this include the terminal block?
Yes. Bosch describes 00640476 as a terminal box with terminal block.
Is the cover included?
No. The matching wiring/terminal-box cover is Bosch part 00640477 and is sold separately.
Does 00640476 replace 640476?
Yes. 640476 is the earlier Bosch part number superseded by 00640476.
Will it fit every Bosch dishwasher?
No. Compatibility depends on the full Bosch E-Nr./model and revision. Verify the complete model number before purchase.
Shop With Confidence
Use the complete dishwasher model or E-Nr. to confirm fitment before ordering. Genuine Bosch OEM construction helps ensure the correct electrical connection design for compatible models.
Genuine Bosch OEMTerminal Block IncludedCompatibility SupportNew Part
5304517203 Genuine OEM Frigidaire Dishwasher Lower Spray Arm
The 5304517203 is a genuine Frigidaire OEM lower spray arm for Frigidaire, Electrolux, Gibson, Crosley, Kelvinator, Westinghouse, and Kenmore dishwashers. Positioned at the bottom of the dishwasher tub, this arm rotates as water is pumped through it, spraying water in all directions through its nozzle openings to clean dishes in the lower rack. It snaps directly into the bottom sump assembly and is essential for proper water distribution during the wash cycle.
Made of durable plastic and metal, finished in gray/blue. Over time, the arm can crack, warp, or wear from general use and repeated exposure to hot water and detergent — high heat exposure in particular is a documented cause of failure. A broken or worn spray arm typically shows up as visible damage on the arm itself, dishes in the lower rack not getting cleaned properly, reduced or uneven water coverage, or the arm having difficulty rotating or getting stuck. It directly replaces 154568001, 5304506526, 154568002, 1542508, 154250801, 154250901, 154281101, 1543358, 154414101, 154414102, 4840174, PD00047210, EAP12585623, AP6783883, AFR18880, PS12585623
Quick Answer
The 5304517203 Genuine OEM Frigidaire Dishwasher Lower Spray Arm fixes Frigidaire, Electrolux, Gibson, Crosley, Kelvinator, Westinghouse, and Kenmore dishwashers where the lower rack isn't getting cleaned properly, water coverage is reduced or uneven, or the arm won't rotate freely or has visible cracks. Snaps into the bottom sump assembly. Replaces 154568001, 5304506526, 154568002, 1542508, 154250801, 154250901, 154281101, 1543358, 154414101, 154414102, 4840174, PD00047210, EAP12585623, AP6783883, AFR18880, PS12585623. After installing, confirm the arm spins freely by hand and doesn't contact the heating element before running a cycle.
Common Problems This Part Fixes
Dishes in the lower rack not getting cleaned properly
Reduced or uneven water coverage during the wash cycle
Spray arm that won't rotate freely or gets stuck
Visible cracks, warping, or damage on the arm itself
Arm that has come loose or detached from the sump assembly
Clogged nozzle holes reducing water pressure and spray coverage
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher lower spray arm directly replaces the following OEM and cross-reference part numbers:
5304517203, 154568001, 5304506526, 154568002, 1542508, 154250801, 154250901, 154281101, 1543358, 154414101, 154414102, 4840174, PD00047210, EAP12585623, AP6783883, AFR18880, PS12585623
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lower spray arm is compatible with select Frigidaire dishwashers, and also fits select Electrolux, Gibson, Crosley, Kelvinator, Westinghouse, and Kenmore dishwashers built on the same platform.
Note: Non-genuine versions of this exact part number are sold by several third-party sellers. A customer using a non-genuine version of this spray arm reported it came loose and broke during operation, so confirm you're ordering the genuine Frigidaire part rather than a lower-cost imitation. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified nozzle pattern and rotation fit
Snaps directly into the bottom sump assembly for a secure, no-tools installation
Resolves "not cleaning lower rack dishes," "uneven water coverage," and "won't rotate freely" symptoms
Durable plastic and metal construction, gray/blue finish
Approximate dimensions: 16.00" x 3.10" x 3.10" (L x W x H)
Direct drop-in replacement — no modification required
Replaces 154568001, 5304506526, 154568002, 1542508, 154250801, 154250901, 154281101, 1543358, 154414101, 154414102, 4840174, PD00047210, EAP12585623, AP6783883, AFR18880, PS12585623
Compatible with Frigidaire, Electrolux, Gibson, Crosley, Kelvinator, Westinghouse, and Kenmore dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
5304517203
Part Type
Dishwasher Lower Spray Arm
Condition
Genuine OEM
Brand
Frigidaire
Location
Bottom of the dishwasher tub, in the lower sump assembly
Material
Plastic and metal
Color
Gray / Blue
Dimensions
Approx. 16.00" x 3.10" x 3.10" (L x W x H)
Repair Difficulty
Very Easy — no tools required
Quantity
1 lower spray arm
Compatible Brands
Frigidaire, Electrolux, Gibson, Crosley, Kelvinator, Westinghouse, Kenmore
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Confirm Clearance From The Heating Element Disconnect power to the dishwasher and shut off the water supply before beginning. Wear work gloves. Open the dishwasher and pull out the lower rack, setting it aside. Remove the old lower spray arm by releasing the locking tabs on each side and gently pulling it off the sump assembly. Snap the new 5304517203 spray arm onto the sump assembly in the same position. Before closing everything up, spin the arm gently by hand to confirm it rotates freely and does not make contact with the heating element — a real customer account described a spray arm and its support becoming loose and falling into the tub during use, so it's worth double-checking that the arm is fully and securely seated before running a cycle. Return the lower dish rack to its position and close the dishwasher door. Restore power and water, then run a test cycle to confirm the arm spins smoothly and dishes in the lower rack are getting properly cleaned. Tools needed: none.
Frequently Asked Questions
My dishes in the lower rack aren't getting clean. Is this the part I need?
Yes, this is one of the most common symptoms of a worn or damaged lower spray arm. If the arm is cracked, clogged, or not rotating freely, water can't reach dishes in the lower rack evenly, leaving them dirty even when the upper rack comes out clean.
I've read that a spray arm can come loose during operation. How do I prevent that?
This has been reported, particularly with non-genuine imitation parts under the same number. To help prevent it, make sure the new arm snaps fully and securely onto the sump assembly during installation, and spin it gently by hand to confirm it's seated correctly and rotates without wobbling before running your first cycle with it installed.
Do I need any tools to replace this spray arm?
No. This is a simple snap-in, snap-out repair — release the locking tabs on the old arm to remove it, and press the new one onto the sump assembly until it clicks into place. No tools are required.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original nozzle pattern, dimensions, and sump connection of the lower spray arm originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DD62-00084A Dishwasher Genuine OEM Water Valve
Description: This Water Valve is a Genuine OEM part compatible with specific Samsung dishwasher models. It is responsible for opening and closing the water supply to the dishwasher. It regulates the water pressure and ensures the proper amount of water is dispensed for each cycle. Causes of a faulty water valve can include wear and tear over time, sediment or debris buildup, electrical component failure, or damage due to high water pressure. These factors can result in issues such as inadequate water flow, leaks, or the dishwasher not filling or draining properly.
Replaces Part Numbers: DD62-00084A, AP5178218, PS4222448
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WPW10352973 Washer Genuine Dispenser Actuator
Dispenser Drawer Switch Actuator for Washer
Replaces Part Numbers: WPW10352973, W10352973, W10065190, W10163975, W10283468, 8183186, AP6020256, PS11753574.
✅ Product Description:
Restore proper detergent dispensing with this genuine OEM WPW10352973 washer dispenser actuator. Designed to control the flow of detergent and fabric softener into your wash cycle, this part is a direct replacement for worn or non-functioning actuators in many Whirlpool, Maytag, Amana, Kenmore, and Crosley top-load washing machines.
Part Features:
Genuine OEM quality – built to factory specs
Replaces part numbers: WPW10352973, W10352973, W10065190, W10163975, W10283468, 8183186, AP6020256, PS11753574.
Controls dispenser drawer movement for proper release timing
Easy to install with basic tools
Fixes the following symptoms:
Dispenser drawer not opening
Detergent or softener not dispensing
Error codes related to actuator failure
Inconsistent or incomplete wash cycles
Compatible with:Many models from Whirlpool, Maytag, Kenmore, Amana, and more.(Check model number before ordering or contact us for fitment help.)
✅ Why Buy from Parts-O-Matic?
Guaranteed OEM-quality parts
Always Fast and Free U.S. shipping
Competitive pricing
Expert support for part compatibility
🛒 Get your washer working like new – order the WPW10352973 Dispenser Actuator now at Parts-O-Matic.com, and enjoy fast, free shipping with no minimum.
WPW10481149 Dishwasher Touchpad and Control Panel
Fits Specific KitchenAid Dishwasher Models
Color: White
Replaces Part Numbers: WPW10481149, W10356933, W10481149, AP6022134, PS11755463.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11175771 Genuine OEM Whirlpool Dishwasher Water Valve
The W11175771 is a genuine Whirlpool OEM water inlet valve for Whirlpool, Kenmore, KitchenAid, Amana, Crosley, Magic Chef, and Inglis dishwashers, located behind the lower kick plate panel in either the right or left corner. This valve controls the flow of water into the appliance during the wash cycle — an electrical solenoid plunger opens and closes the valve to admit exactly the right amount of water at the appropriate stages of the dishwasher's cycle.
Measuring approximately 3.37" in height, this is a superseding part, replacing the earlier W10872255 and W11130744 valve numbers so older models can be updated with the current version. Over time, a screen inside the valve can become clogged with sediment — this screen isn't designed to be cleaned or serviced, so a clog means the whole valve needs to be replaced. A failing valve produces a clear set of symptoms: the dishwasher not filling with enough water or not filling at all, leaking into the dishwasher while not in use, or overfilling with too much water. It directly replaces AP6339872, W10195047, W10327250, W10872255, W11130744, W10327249, W10316814, and W11130743.
Quick Answer
The W11175771 Genuine OEM Whirlpool Dishwasher Water Valve fixes Whirlpool, Kenmore, KitchenAid, Amana, Crosley, Magic Chef, and Inglis dishwashers that aren't filling with water, are leaking, or are overfilling. Located behind the lower kick plate panel. Replaces AP6339872, W10195047, W10327250, W10872255, W11130744, W10327249, W10316814, W11130743. While the dishwasher is disassembled for this repair, consider also checking or replacing the water supply adapter, since it's in the same area and easy to inspect at the same time.
Common Problems This Part Fixes
Dishwasher not filling with enough water, or not filling at all
Water leaking into the dishwasher while it's not in use
Dishwasher overfilling with too much water
High-pitched whining sound while the dishwasher is filling
Poor washing results or an error code related to water fill
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11175771, 3015468, 328C151-T, 4451572, 4843711, AP5804368, AP6024301, AP6339872, EAP11738107, EAP12578165, EAP3406951, AWP43823, PD00052484, PS11738107, PS12578165
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select Whirlpool dishwashers, and also fits select Kenmore, KitchenAid, Amana, Crosley, Magic Chef, and Inglis dishwashers built on the Whirlpool platform, including model numbers such as WDF130PAHB1, WDF130PAHB2, WDF130PAHS1, WDF130PAHS2, WDF130PAHW2, WDF330PAHB3, WDF330PAHW4, WDF331PAHB1, WDF520PADB9, WDF520PADM, WDT730PAHZ, WDT720PADM, WDF330PAHS, ADB1400AGW, KDTE104ESS1, and Kenmore 66513222N410 through N414.
Note: Always verify your full model number before ordering, since similar-looking dishwasher water valves can vary between models. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified solenoid design and flow rate
Regulates water flow into the dishwasher via an electrical solenoid plunger
Resolves "won't fill," "leaking," "overfilling," and "whining noise" symptoms caused by valve failure
Superseding part — current replacement for the earlier W10872255 and W11130744 valves
Approximately 3.37" in height
Direct drop-in replacement — matches the original mounting and hose connections
Replaces AP6339872, W10195047, W10327250, W10872255, W11130744, W10327249, W10316814, and W11130743
Compatible with Whirlpool, Kenmore, KitchenAid, Amana, Crosley, Magic Chef, and Inglis dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W11175771
Part Type
Dishwasher Water Inlet Valve
Condition
Genuine OEM
Brand
Whirlpool
Location
Behind the lower kick plate panel, right or left corner
Height
3.37"
Supersedes
W10872255, W11130744
Screen Serviceable
No — replace valve if clogged
Repair Difficulty
Easy to Moderate — approx. 15 to 30 minutes
Quantity
1 valve
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Amana, Crosley, Magic Chef, Inglis
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Remove the bottom front kick plate to access the interior, where the valve is located behind the panel in either the right or left corner depending on your model. Photograph the wiring and hose connections before disconnecting anything. Disconnect the water line, the electrical connector, and remove the mounting screws securing the old valve, then pull it free. Install the new W11175771 in the same position, securely reconnect the water line and electrical connector, and secure the mounting screws. While you're in this area, it's worth inspecting the water supply adapter for wear, since it's a related part in the same location that's easy to check while everything is already accessible. Reinstall the kick plate, restore the water supply and power, then run a test cycle to confirm the dishwasher fills correctly with no leaks. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
My dishwasher isn't filling with water at all. Is this the right part?
Yes, this is the most direct symptom of a failed water inlet valve. Since this valve is what admits water from your household supply into the dishwasher, a solenoid failure or internal blockage can prevent any water from entering at all, stopping the wash cycle from proceeding.
Can I just clean the valve's screen instead of replacing the whole thing?
No — the screen inside this valve isn't designed to be cleaned or serviced. If it becomes clogged with sediment from your household water supply, the entire valve should be replaced rather than attempting to clean or repair the screen itself.
My dishwasher makes a high-pitched whining sound while filling. Is that this valve?
Yes, this is a documented symptom of a failing water inlet valve. One customer specifically traced an "obnoxious high-pitched whining sound when filling with water" to this exact valve and resolved it with a straightforward replacement in about 15 minutes.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water inlet valve originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WD19X25278 Dishwasher Diverter Assembly
The XPARTCO WD19X25278 is an aftermarket replacement diverter assembly for GE dishwashers, and also fits select Hotpoint, Haier, Monogram, and Café models. This assembly controls the flow of water to the spray arms, directing wash water to the upper or lower spray arm at the correct point in the cycle for thorough, even cleaning.
The assembly includes a valve and float mechanism designed to optimize water flow while minimizing noise. Common causes of failure include a worn or cracked diverter valve, or a rubber boot/hose connection that develops a leak over time. Symptoms of a failing diverter assembly include water pooling underneath the dishwasher, poor washing performance from one or both spray arms, or unusual noise during the wash cycle. It directly replaces AP6871922, WD18X21678, 4922277, PS12710077, WD00X25260, WD19X25259, and WD19X25278-25PK.
Quick Answer
The XPARTCO WD19X25278 Dishwasher Diverter Assembly fixes GE, Hotpoint, Haier, Monogram, and Café dishwashers with water pooling underneath the unit, poor washing performance from the spray arms, or unusual noise during the cycle. Replaces AP6871922, WD18X21678, 4922277, PS12710077, WD00X25260, WD19X25259, WD19X25278-25PK. Make sure the diverter is fully engaged with the spout on the wash pump before tightening the hose clamp — one customer had the tube cut when tightening the clamp without full engagement first.
Common Problems This Part Fixes
Water pooling or leaking underneath the dishwasher
Poor washing performance from one or both spray arms
Unusual noise during the wash cycle
Water not properly directed to the correct spray arm
Inconsistent cleaning results between the upper and lower racks
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher diverter assembly directly replaces the following OEM and cross-reference part numbers:
WD19X25278, 4466639, 4922277, WD00X25260, WD18X21678, WD19X25259, WD19X25278-25PK, AP6024268, AP6871922, AGE24645, PD00049646, EAP11736568, EAP12710077, PS11736568, PS12710077
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This diverter assembly is compatible with select GE dishwashers, and also fits select Hotpoint, Haier, Monogram, and Café dishwashers built on the GE platform, including model numbers such as ADT521PGJ0BS, ADT521PGJ0WS, ADT521PGJ2BS, GDT655SGJ5BB, GDF510PGJ0BB, GDF511PGM0WW, GDF520PGJ0BB, and GDF530PGM0BB.
Note: The assembly may include multiple parts depending on your model — refer to your appliance's parts diagram for a complete list. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement diverter assembly — controls water flow to the spray arms
Resolves "water pooling underneath," "poor spray arm performance," and "unusual noise" symptoms
Valve and float assembly engineered to optimize water flow while minimizing noise
Direct drop-in replacement matching the original mounting and connections
Replaces AP6871922, WD18X21678, 4922277, PS12710077, WD00X25260, WD19X25259, and WD19X25278-25PK
Compatible with GE, Hotpoint, Haier, Monogram, and Café dishwashers
Aftermarket replacement built to OEM-equivalent quality standards
DIY-friendly repair
Product Specifications
Part Number
WD19X25278
OEM Part Number
WD19X25278
Part Type
Dishwasher Diverter Valve Assembly
Condition
Aftermarket Replacement
Function
Controls water flow direction to the upper and lower spray arms
Design
Valve and float assembly
Repair Difficulty
Easy to Moderate — DIY-friendly
Quantity
1 diverter assembly
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Fully Engage The Spout Before Tightening The Clamp Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Open the dishwasher door and remove the racks to expose the bottom of the dishwasher. Locate the diverter assembly at the bottom of the unit and remove the two screws securing it in place. Disconnect the old assembly from the wash pump spout and any hose connections. Before tightening the hose clamp on the new assembly, make sure the diverter is fully and securely engaged with the spout on the wash pump. One customer had their diverter's tube cut when the clamp was tightened without the assembly being fully seated first — take your time to confirm a proper seat before applying clamp pressure. Secure the new WD19X25278 assembly in place with the two mounting screws. Reconnect any hose connections and reinstall the dish racks. Restore the water supply and power, then run a test cycle — ideally checking underneath the unit partway through — to confirm no leaking from the diverter area and correct water distribution to both spray arms. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
I'm seeing water pooling under my dishwasher. Is this the part I need?
Yes, this is a commonly documented symptom. If the diverter's rubber boot or hose connection has developed a leak, water can spray or drip during the wash cycle and collect underneath the unit. One customer traced their leak to a factory-defective hose in the diverter assembly, and unfortunately the leaking water had also gotten into their circulation pump motor over several loads, eroding the motor brushes — so it's worth inspecting the pump motor as well if you've had a diverter leak for a while before noticing it.
Any tips to avoid damaging the new part during installation?
Yes — make sure the new diverter is fully engaged with the spout on the wash pump before tightening the hose clamp. One customer's first replacement part was ruined because the clamp was tightened before the assembly was properly seated, which cut into the tube. Taking an extra moment to confirm a full, secure connection before clamping down prevents this.
Is this a difficult repair?
No, this is generally a DIY-friendly repair. It involves removing the dish racks, unscrewing two mounting screws to access the diverter at the bottom of the dishwasher, and swapping the assembly, typically without needing to pull the dishwasher out from under the counter.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the valve and float design, mounting configuration, and connections of the original WD19X25278 diverter assembly used in compatible GE, Hotpoint, Haier, Monogram, and Café dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
8558953 Dishwasher Touchpad and Control Panel
Genuine OEM
Fits Specific Kenmore Dishwasher Models
Replaces Part Numbers: WP8558953, 8558953, 1066185, 8558928, 8563373, AP6013229, PS11746451.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
5304517587 Dishwasher Switch Assembly
Description: The Switch Assembly is an OEM replacement part for specific Frigidaire dishwasher models. It contains a touchpad and electronic controls that operate wash cycles and drying features.
Replaces Part Numbers:5304517587, 4840235, AP6802340, PS12585690.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
