5304517587 Dishwasher Switch Assembly
Description: The Switch Assembly is an OEM replacement part for specific Frigidaire dishwasher models. It contains a touchpad and electronic controls that operate wash cycles and drying features.
Replaces Part Numbers:5304517587, 4840235, AP6802340, PS12585690.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
8558953 Dishwasher Touchpad and Control Panel
Genuine OEM
Fits Specific Kenmore Dishwasher Models
Replaces Part Numbers: WP8558953, 8558953, 1066185, 8558928, 8563373, AP6013229, PS11746451.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WD21X10224 Genuine GE / Hotpoint Dishwasher Interlock Switch
Replaces Part Numbers:AP3872949, 1168295, AH1021382, EA1021382, PS1021382
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
00770657 Genuine OEM Bosch Dishwasher Silverware / Cutlery Drawer
The 00770657 is a genuine Bosch OEM cutlery drawer — a dedicated third-rack silverware caddy that sits in the upper interior of the dishwasher tub, above the top rack, on select Bosch dishwashers equipped with a third rack add-on compartment. Rather than loading silverware into a basket down in the lower rack, this drawer holds forks, spoons, and knives flat in their own dedicated level, laid out individually with room around each piece so water and detergent can reach every surface. It rides on durable rollers along rails built into the tub, sliding smoothly in and out for loading and unloading, and its position at the top of the tub gives it a clear, unobstructed line to the upper spray arm for targeted cleaning.
The tray and support grid inside the drawer are open enough to let water flow freely through while still keeping utensils separated and organized. Because it's a lightweight tray sitting in a hot, wet, chemically active environment for years, common failure points include a metal frame that rusts through and eventually collapses under its own weight, plastic that becomes brittle or begins visibly disappearing from years of heat exposure, and dividers that crack or break, letting silverware jumble together. It directly replaces AP5788109, 00689507, 3279853, and PS8747441. As a genuine OEM part, the 00770657 is manufactured by Bosch to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The 00770657 Genuine OEM Bosch Dishwasher Silverware / Cutlery Drawer fixes Bosch (and compatible Thermador, Gaggenau, and select Kenmore) dishwashers with a third-rack cutlery drawer that has rusted through, has cracked or broken dividers, has become gummy or sticky and won't slide smoothly, or has cracks exposing silverware to the heating element below. Rides on rollers for smooth in-and-out extension. Replaces AP5788109, 00689507, 3279853, PS8747441. This is the roller-equipped cutlery drawer — a similar-looking companion part, 00770656, is a different drawer design without rollers, so double-check which one your dishwasher uses.
Common Problems This Part Fixes
Metal frame of the cutlery drawer rusted through or visibly corroding
Drawer frame collapsing or sagging under the weight of silverware
Missing or broken dividers letting silverware commingle instead of staying separated
Drawer glides that have become gummy or sticky from food residue buildup, obstructing smooth movement
Cracks or holes in the drawer exposing silverware to direct contact with the heating element
Plastic that has become brittle, discolored, or is visibly disappearing after years of heat exposure
Silverware not getting fully clean due to poor spray coverage from a warped or damaged drawer
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher cutlery drawer directly replaces the following OEM and cross-reference part numbers:
00770657, AP5788109, 00689507, 3279853, ABS12031, EAP8747441, PD00043732, PS8747441
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cutlery drawer is compatible with select Bosch dishwashers equipped with a third rack add-on compartment, and is also compatible with Thermador, Gaggenau, and select Kenmore dishwashers configured with a triple-rack setup, including model numbers such as:
SHE68T52UC, SHE68T55UC, SHE68T56UC, SHE68TL5UC
SHE863WF5N, SHE863WF6N
SHP65T56UC, SHP65TL2UC
SHV68T53UC, SHV68TL3UC, SHV863WD3N
SHVM63W53N, SHXM63W55N, SHXM63WS5N
Each of these models spans multiple production suffixes (such as /01, /02, /07, and /09) — check your full model and production number for exact confirmation.
Note — check for rollers: This drawer rides on rollers. A similar-looking companion part, 00770656, is a separate cutlery drawer design used on other Bosch/Thermador/Gaggenau models without the roller mechanism. The two are not interchangeable. Check whether your existing drawer slides on visible rollers before ordering, and always verify your full model and production number. Contact our support team with your model number if you're unsure which drawer fits your dishwasher.
Key Features
Genuine Bosch OEM part — factory-specified frame, grid, and roller mechanism
Dedicated third-rack cutlery drawer positioned above the top rack for optimal spray-arm targeting
Resolves "rusted frame," "broken dividers," "sticky glides," and "cracked drawer" symptoms caused by wear and corrosion
Multi-level basket layout keeps silverware separated for full surface exposure to wash spray
Rides smoothly on rollers for easy extension and retraction when loading and unloading
Open tray and support grid design allows water and detergent to flow through freely
Direct drop-in replacement — no tools required, simply slides into place on existing rails
Replaces AP5788109, 00689507, 3279853, and PS8747441
Compatible with Bosch, Thermador, Gaggenau, and select Kenmore third-rack dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
00770657
Part Type
Dishwasher Third-Rack Cutlery / Silverware Drawer
Condition
Genuine OEM
Brand
Bosch
Location
Upper interior of the tub, above the top rack
Mounting
Rides on rollers along built-in tub rails
Design
Multi-level basket grid with open tray for water flow
Repair Difficulty
Very Easy — no tools required
Quantity
1 cutlery drawer
Compatible Brands
Bosch, Thermador, Gaggenau, select Kenmore
Installation Notes
This is one of the simplest repairs in the entire dishwasher — no tools, no wiring, and no water lines to disconnect. Open the dishwasher door fully. Locate the existing cutlery drawer at the top of the tub, above the upper rack, and slide it forward and out along its rails until it clears the cabinet. Line up the new 00770657 drawer with the same rollers and rails, and slide it in until it seats fully at the back of the tub. Close the door and run a cycle to confirm the drawer sits securely and doesn't rattle or shift during operation.
Frequently Asked Questions
Does my drawer use rollers, or is it the other style?
Slide your existing drawer out partway and look underneath or along the sides — this 00770657 drawer rides on visible roller wheels along the tub rails. If your drawer instead has a simpler glide track with no rollers, you likely have the companion part, 00770656, which is a different design used on other models. The two aren't interchangeable, so it's worth confirming before ordering.
My drawer's metal frame has rusted through. Is that just cosmetic, or should I replace it?
It's worth replacing rather than living with it. Once the metal frame starts rusting through, it typically continues to weaken and can eventually collapse under the weight of loaded silverware, sometimes suddenly. Customers who've dealt with this describe the original frame rusting to the point of failure over time — replacing it before it fully gives out avoids a mid-cycle collapse and keeps your utensils properly organized and exposed to the wash spray.
Do I need any tools to install this?
No. This is a genuinely tool-free repair — slide the old drawer out along its rails, then slide the new one in until it seats. Customers consistently describe this as one of the easiest dishwasher parts to swap.
I see cracks or holes in my drawer near the bottom. Is that a safety concern?
It can be, depending on where the damage is. If cracks or holes are positioned where silverware could shift down and make direct contact with the dishwasher's heating element, that's worth addressing rather than ignoring, since it can affect both the cleaning process and the condition of your utensils over repeated cycles. Replacing a cracked or holed drawer resolves this.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Bosch to factory specifications — guaranteed fit, materials, and performance. It matches the original roller mechanism, basket grid layout, and dimensions of the cutlery drawer originally installed in your third-rack-equipped Bosch, Thermador, Gaggenau, or compatible Kenmore dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11175771 Dishwasher Water Valve
Product Overview
The XPARTCO W11175771 Dishwasher Water Valve controls the flow of water into your dishwasher during the fill cycle. This high-quality aftermarket inlet valve ensures the proper amount of water enters the unit, allowing for efficient and effective cleaning performance.
Quick Answer
If your dishwasher is not filling with water, filling too slowly, or not cleaning properly, the W11175771 water valve may be faulty. Replacing it restores proper water flow and washing performance.
Replaces Part Numbers
Replaces OEM part number: W11175771, W10195047, W10327250, W10872255, W11130744, EAP12578165, AWP43823, PD00052484, AP6339872, PS12578165, WPW10327249, W10327249, W10316814, 3015511, W11130743, PD00052484, EAP12578165, AP6019618, PS11752927.
Compatibility
This dishwasher water inlet valve is compatible with select Whirlpool, Maytag, KitchenAid, and other compatible dishwashers.
Example compatible models include (but are not limited to):
Whirlpool WDF520PADM7, WDT750SAKZ0
KitchenAid KDFE204KPS0
Maytag MDB4949SHZ0
Kenmore 665.13242K701
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not filling with water
Slow or weak water fill
Dishes not cleaning properly
Water flow issues during wash cycle
Key Features
Controls water intake during fill cycle
Ensures proper water flow
High-quality aftermarket replacement
Durable and reliable construction
Product Specifications
Part Number: XPW11175771
Part Type: Dishwasher Water Inlet Valve
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Dishwasher Water Fill System
Troubleshooting Guide
No water entering → Faulty valve
Slow fill → Clogged or weak valve
Poor cleaning → Insufficient water supply
When Should You Replace This Valve?
Replace this valve if your dishwasher fails to fill with water, fills too slowly, or does not clean dishes effectively.
Installation Notes
⚠️ Disconnect power and water supply before installation. Access the inlet valve from the bottom or rear of the unit and install securely according to your dishwasher model.
Related Parts
Dishwasher Float Switch
Circulation Pump
Drain Pump
Frequently Asked Questions
Will this valve fit my dishwasher?This valve fits many Whirlpool and compatible models. Always verify your model number.
What does a water inlet valve do?It controls the amount of water entering the dishwasher.
What are signs of a bad valve?No fill, slow fill, or poor cleaning performance.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
🚰 DD82-01588A Dishwasher Water Inlet Valve – Genuine OEM Samsung Part
🔁 Replaces These Part Numbers
DD82-01588A (primary OEM)
Also Replaces PS12593084, AP6807545, DD81-02265A, AP6244375, PS12085633.
Description: This Dishwasher Water Inlet Valve Assembly is essential for regulating the water flow into dishwasher, ensuring optimal cleaning performance. This replacement Genuine OEM part is engineered to provide precise water control, preventing leaks and maintaining efficient operation.
✅ Key Features
Genuine Samsung OEM part – DD82-01588A
Precision-engineered to match factory standards
Controls cold water intake with accurate timing and pressure
Easy to install using standard tools
Tested for leak-free performance
🔧 Fixes Common Symptoms
Dishwasher won’t fill or fills slowly
Error codes related to water inlet
No water intake at cycle start
Valve leaks or hums without water flow
🚚 Why Buy from Parts‑O‑Matic?
✅ Genuine OEM quality — not a knock‑off
✅ Always Fast and Free U.S. shipping
✅ Expert customer support for part fitment
✅ Trusted by DIYers and appliance professionals
🛒 Restore proper water fill and cycle reliability — order your DD82-01588A OEM water inlet valve today from Parts‑O‑Matic and enjoy speedy, free delivery.
