00770657 Genuine OEM Bosch Dishwasher Silverware / Cutlery Drawer
The 00770657 is a genuine Bosch OEM cutlery drawer — a dedicated third-rack silverware caddy that sits in the upper interior of the dishwasher tub, above the top rack, on select Bosch dishwashers equipped with a third rack add-on compartment. Rather than loading silverware into a basket down in the lower rack, this drawer holds forks, spoons, and knives flat in their own dedicated level, laid out individually with room around each piece so water and detergent can reach every surface. It rides on durable rollers along rails built into the tub, sliding smoothly in and out for loading and unloading, and its position at the top of the tub gives it a clear, unobstructed line to the upper spray arm for targeted cleaning.
The tray and support grid inside the drawer are open enough to let water flow freely through while still keeping utensils separated and organized. Because it's a lightweight tray sitting in a hot, wet, chemically active environment for years, common failure points include a metal frame that rusts through and eventually collapses under its own weight, plastic that becomes brittle or begins visibly disappearing from years of heat exposure, and dividers that crack or break, letting silverware jumble together. It directly replaces AP5788109, 00689507, 3279853, and PS8747441. As a genuine OEM part, the 00770657 is manufactured by Bosch to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The 00770657 Genuine OEM Bosch Dishwasher Silverware / Cutlery Drawer fixes Bosch (and compatible Thermador, Gaggenau, and select Kenmore) dishwashers with a third-rack cutlery drawer that has rusted through, has cracked or broken dividers, has become gummy or sticky and won't slide smoothly, or has cracks exposing silverware to the heating element below. Rides on rollers for smooth in-and-out extension. Replaces AP5788109, 00689507, 3279853, PS8747441. This is the roller-equipped cutlery drawer — a similar-looking companion part, 00770656, is a different drawer design without rollers, so double-check which one your dishwasher uses.
Common Problems This Part Fixes
Metal frame of the cutlery drawer rusted through or visibly corroding
Drawer frame collapsing or sagging under the weight of silverware
Missing or broken dividers letting silverware commingle instead of staying separated
Drawer glides that have become gummy or sticky from food residue buildup, obstructing smooth movement
Cracks or holes in the drawer exposing silverware to direct contact with the heating element
Plastic that has become brittle, discolored, or is visibly disappearing after years of heat exposure
Silverware not getting fully clean due to poor spray coverage from a warped or damaged drawer
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher cutlery drawer directly replaces the following OEM and cross-reference part numbers:
00770657, AP5788109, 00689507, 3279853, ABS12031, EAP8747441, PD00043732, PS8747441
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cutlery drawer is compatible with select Bosch dishwashers equipped with a third rack add-on compartment, and is also compatible with Thermador, Gaggenau, and select Kenmore dishwashers configured with a triple-rack setup, including model numbers such as:
SHE68T52UC, SHE68T55UC, SHE68T56UC, SHE68TL5UC
SHE863WF5N, SHE863WF6N
SHP65T56UC, SHP65TL2UC
SHV68T53UC, SHV68TL3UC, SHV863WD3N
SHVM63W53N, SHXM63W55N, SHXM63WS5N
Each of these models spans multiple production suffixes (such as /01, /02, /07, and /09) — check your full model and production number for exact confirmation.
Note — check for rollers: This drawer rides on rollers. A similar-looking companion part, 00770656, is a separate cutlery drawer design used on other Bosch/Thermador/Gaggenau models without the roller mechanism. The two are not interchangeable. Check whether your existing drawer slides on visible rollers before ordering, and always verify your full model and production number. Contact our support team with your model number if you're unsure which drawer fits your dishwasher.
Key Features
Genuine Bosch OEM part — factory-specified frame, grid, and roller mechanism
Dedicated third-rack cutlery drawer positioned above the top rack for optimal spray-arm targeting
Resolves "rusted frame," "broken dividers," "sticky glides," and "cracked drawer" symptoms caused by wear and corrosion
Multi-level basket layout keeps silverware separated for full surface exposure to wash spray
Rides smoothly on rollers for easy extension and retraction when loading and unloading
Open tray and support grid design allows water and detergent to flow through freely
Direct drop-in replacement — no tools required, simply slides into place on existing rails
Replaces AP5788109, 00689507, 3279853, and PS8747441
Compatible with Bosch, Thermador, Gaggenau, and select Kenmore third-rack dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
00770657
Part Type
Dishwasher Third-Rack Cutlery / Silverware Drawer
Condition
Genuine OEM
Brand
Bosch
Location
Upper interior of the tub, above the top rack
Mounting
Rides on rollers along built-in tub rails
Design
Multi-level basket grid with open tray for water flow
Repair Difficulty
Very Easy — no tools required
Quantity
1 cutlery drawer
Compatible Brands
Bosch, Thermador, Gaggenau, select Kenmore
Installation Notes
This is one of the simplest repairs in the entire dishwasher — no tools, no wiring, and no water lines to disconnect. Open the dishwasher door fully. Locate the existing cutlery drawer at the top of the tub, above the upper rack, and slide it forward and out along its rails until it clears the cabinet. Line up the new 00770657 drawer with the same rollers and rails, and slide it in until it seats fully at the back of the tub. Close the door and run a cycle to confirm the drawer sits securely and doesn't rattle or shift during operation.
Frequently Asked Questions
Does my drawer use rollers, or is it the other style?
Slide your existing drawer out partway and look underneath or along the sides — this 00770657 drawer rides on visible roller wheels along the tub rails. If your drawer instead has a simpler glide track with no rollers, you likely have the companion part, 00770656, which is a different design used on other models. The two aren't interchangeable, so it's worth confirming before ordering.
My drawer's metal frame has rusted through. Is that just cosmetic, or should I replace it?
It's worth replacing rather than living with it. Once the metal frame starts rusting through, it typically continues to weaken and can eventually collapse under the weight of loaded silverware, sometimes suddenly. Customers who've dealt with this describe the original frame rusting to the point of failure over time — replacing it before it fully gives out avoids a mid-cycle collapse and keeps your utensils properly organized and exposed to the wash spray.
Do I need any tools to install this?
No. This is a genuinely tool-free repair — slide the old drawer out along its rails, then slide the new one in until it seats. Customers consistently describe this as one of the easiest dishwasher parts to swap.
I see cracks or holes in my drawer near the bottom. Is that a safety concern?
It can be, depending on where the damage is. If cracks or holes are positioned where silverware could shift down and make direct contact with the dishwasher's heating element, that's worth addressing rather than ignoring, since it can affect both the cleaning process and the condition of your utensils over repeated cycles. Replacing a cracked or holed drawer resolves this.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Bosch to factory specifications — guaranteed fit, materials, and performance. It matches the original roller mechanism, basket grid layout, and dimensions of the cutlery drawer originally installed in your third-rack-equipped Bosch, Thermador, Gaggenau, or compatible Kenmore dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine GE OEM Part
GE WD24X25325 Dishwasher Genuine Fan Vent Assembly
Genuine GE door-vent blower/fan assembly for select GE and Haier dishwashers.
Product Overview
The GE WD24X25325 Dishwasher Fan Vent Assembly is a genuine OEM replacement used in the dishwasher door ventilation system.
The blower circulates air through the door vent during the drying portion of the cycle to help reduce retained moisture and improve drying performance.
Quick Answer
WD24X25325 is a Genuine GE OEM dishwasher door-vent blower/fan motor assembly. It is used on select GE and Haier dishwashers and helps move moist air through the door vent during drying.
Common Problems This Part May Fix
Poor drying performance
Excess moisture remaining after a cycle
Door vent fan does not run
Unusual noise from the vent/blower area
Moist air is not being exhausted through the door vent
Replaces and Cross-References
WD24X25325, 265D2664G005, U40G12BS3A5-51, AGE25072, AP6972063, EAP12726435, PD00073154, PS12726435.
Cross-reference numbers are supplied for identification. Always verify the complete dishwasher model number before ordering.
Compatibility
Fits select GE and Haier dishwashers. Compatible model examples include:
CDT800P2N0S1
CDT805P2N0S1
CDT845P2N3S1
DDT700SBN0TS
GDF645SSN0SS
GDT645SFN3DS
GDT665SFN0DS
GDP665SYN3FS
PDT715SYN2FS
PDT715SFN0DS
PDP715SYN3FS
QDP555SYN0FS
Important: This is only a partial compatibility list. Confirm the exact dishwasher model number before purchase because similar models may use a different vent or blower assembly.
Key Features
Genuine GE Appliances OEM part
Complete door-vent blower/fan assembly
Circulates air through the dishwasher door vent
Helps reduce moisture during drying
For select GE and Haier dishwashers
Product Specifications
Manufacturer
GE Appliances
Manufacturer Part Number
WD24X25325
Part Type
Dishwasher Fan Vent / Door Vent Blower Assembly
Condition
New
Part Quality
Genuine OEM
Application
Dishwasher Door Ventilation / Drying System
Approx. Shipping Weight
0.5 lb
Installation Notes
Disconnect electrical power to the dishwasher at the breaker before service.
Access the door vent assembly according to the appliance service procedure.
Disconnect the wiring connector carefully before removing the old fan assembly.
Transfer or reuse any hardware only as directed for the specific model.
Confirm the vent path is clear and the new assembly is fully seated before reassembly.
Diagnostic note: Poor drying can also result from rinse-aid settings, heating-system faults, blocked vent passages, or control issues. Confirm the fan assembly is defective before replacing it.
Frequently Asked Questions
Is WD24X25325 a Genuine GE OEM part?
Yes. GE Appliances identifies WD24X25325 as a genuine replacement fan vent assembly.
What does this fan assembly do?
It circulates air through the dishwasher door vent to help reduce moisture during the drying stage.
Does it fit every GE dishwasher?
No. It fits specific GE and Haier models. Verify the complete model number before ordering.
Is this only the fan motor?
This listing is for the complete WD24X25325 fan vent / door-vent blower assembly as supplied by GE.
Shop With Confidence
Use your dishwasher's complete model number to confirm fitment before purchase.
Genuine GE OEMFan Vent AssemblyModel Verification RecommendedFast U.S. Shipping
W11087376 Dishwasher Genuine OEM Pump and Motor Assembly
Fits specific Whirlpool, Maytag, Kenmore Dishwasher models
Description: This Dishwasher Pump & Motor is an OEM replacement part for specific Whirlpool dishwasher models. As the main component for water circulation, it contains both the water pump and motor required to power it.
Replaces Part Numbers:W11087376, W10917114, 4534143, AP6237961, PS12074533.
California Residents only
WARNING: California’s Proposition 65
DD31-00016B Dishwasher Drain Pump Motor - Compatible with Samsung Dishwashers
Product Description
Restore your dishwasher’s performance with the DD31-00016B Dishwasher Drain Pump Motor. This genuine OEM replacement pump ensures efficient water drainage during wash and rinse cycles, preventing water pooling and error codes. Designed for Samsung dishwashers.
Replaces part numbers: DD31-00016B, AP7244901, PS17504318, EAP17504318, PD00089738.
Verify your model number or contact support for assistance.
Key Features:
✅ Brand Compatibility: Fits select Samsung dishwasher models.
💧 Specifications: OEM drain pump motor, 120V, 60Hz, 3.5" x 3.5" x 2.5", with plastic impeller and electrical connector for reliable drainage. DD31-00016B Motor Bldc PUMP; BD15-3C, 2800-3400RPM, 230
💰 Cost-Effective: OEM performance at a competitive price.
🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 20–40 minutes.
🛡️ Reliable Fixes: Resolves water pooling, poor drainage, or 5E/SE error codes.
Safety First: Unplug the dishwasher and turn off the water supply before installation to avoid shock or leaks.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a budget-friendly fix!
WD12X24058 Dishwasher Genuine OEM Detergent Dispenser
Detergent Dispenser
Fits select LG Dishwasher models.
Replaces Part Numbers: AGM75469801, AP6234070, PS12078829.
Description: This Detergent Module is a Genuine OEM part for select LG dishwasher models. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.
S48D21 8" Range Surface Element
Product Title
Aftermarket S48D21 8" Range Surface Element - Compatible with Whirlpool, Maytag, Kenmore, Jenn-Air, Amana Electric Ranges
Product Description
Revive your electric range’s cooking performance with the Aftermarket S48D21 8" Range Surface Element from Parts-O-Matic. This high-quality aftermarket burner element replaces the original S48D21, delivering 2100 watts at 240V with a 4-turn coil design for efficient and even heating. Ideal for select Whirlpool, Maytag, Kenmore, Jenn-Air, Amana, and other brand electric ranges, it addresses issues like uneven heating, slow warm-up, or non-functional burners. Enjoy free shipping on all orders at Parts-O-Matic!
Key Features:
✅ Broad Compatibility: Fits select Whirlpool, Maytag, Kenmore, Jenn-Air, Amana, and other electric range models.
🔥 Efficient Heating: 8" diameter, 4-turn coil delivers 2100 watts at 240V for consistent, even cooking.
💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Plug-in design with Y-style bracket; requires no tools and takes 5–10 minutes to install.
🛡️ Fixes Common Issues: Resolves uneven heating, slow warm-up, or burners that fail to heat.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: RF110AXSQ0, RF262LXSB, RF365PXKW0
Maytag: MER4110AAH, MER4120AAQ
Kenmore: 629.4297, 629.60003600 (pre-2004 models)
Jenn-Air: JES9750AAB
Amana: AER5511AAQ
Replaces part numbers: TJ90SP21MA, 14215226, 1938283, 309917, 403782, 404110, 406000, 814154, ERS48D21, SE302, SP21MA, SU214, SU302, TS4D8221, TS4D8221PB, TS4D8221SR, TS4D8221WI, YSP21MA, AP4503257.
Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance.
Installation Notes:
Tools Needed: None for standard installation; a flathead screwdriver may help for stubborn connections.
Safety First: Unplug the range before installation to avoid electrical shock.
Steps: Remove the old burner element by gently pulling it from the receptacle, align the Y-style bracket of the new S48D21 element, and plug it into the socket. Ensure the element sits flat in the drip pan. If the burner is not level, adjust the connection bolts to ensure they are parallel and push down gently. Installation takes 5–10 minutes. Note: A slight burning smell during first use is normal due to a protective coating; this will dissipate after 15–20 minutes.
Download our installation guide or watch our YouTube tutorial for step-by-step instructions.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Restore your range’s cooking performance today!
Add to cart now for an affordable fix with free shipping on your entire order!
