Search results for "washer water valve"

XPARTCO DC93-00634A Dryer Idler Pulley  The XPARTCO DC93-00634A is an aftermarket replacement idler pulley assembly compatible with a wide range of Samsung dryers. The idler pulley rides against the drive belt and keeps it under proper tension as it wraps around the drum and motor pulley. Over time, the pulley wheel can wear, crack, or seize on its shaft, or the spring-loaded tensioner arm can bend or break, causing the belt to lose tension. When this part fails, the dryer commonly won't spin at all even though the motor runs, makes a loud noise from the drive area, or the belt goes slack and starts slipping. It directly replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Installs in 30 minutes to 2 hours depending on how much disassembly your model requires. Quick Answer The XPARTCO DC93-00634A Dryer Idler Pulley fixes Samsung dryers that won't spin the drum even though the motor runs, make a loud noise from the drive belt area, or have a loose/slipping belt. Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Classic symptom: motor hums and runs, but the drum doesn't turn — "no spin, no start." Common Problems This Part Fixes Dryer motor runs but the drum doesn't spin ("no spin, no start") Loud noise or rattling coming from the drive belt/motor area Drive belt slipping, loose, or off-track Visible cracks, wear, or seizing on the pulley wheel Bent or broken tensioner arm/spring Squeaking noise from the pulley as it rotates Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This idler pulley directly replaces the following OEM and cross-reference part numbers: DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This idler pulley is compatible with a wide range of Samsung dryers, including: Samsung DV337AEG/XAA-0000 Samsung DV45H7000EW/A2-0000 Samsung DV45K6200EZ/A3 Samsung DV203AEW/XAA-0000, DV203AGS, and related models Note: This idler pulley is specific to the Samsung drive belt platform and does not fit LG, Whirlpool, GE, or other brands, which use different pulley designs. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure. Key Features Direct-fit replacement Samsung dryer idler pulley assembly Resolves "no spin, no start," "loud noise," and "loose/slipping belt" symptoms Maintains proper belt tension as the belt wraps around the drum and motor pulley Spring-loaded tensioner arm matches original design for correct belt tension Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601 Compatible with a wide range of Samsung dryer models Aftermarket replacement built to OEM-equivalent quality standards Exact-fit design — no modification needed for installation Product Specifications Part Number XPDC93-00634A OEM Part Number DC93-00634A Part Type Dryer Idler Pulley Assembly Condition Aftermarket Replacement Function Maintains drive belt tension Application Samsung Dryer Drive Belt System Compatible Brand Samsung Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Remove the front panel and/or top panel as needed to access the drum and drive belt (access point varies by model). Photograph the belt routing before removing anything. Relieve tension on the drive belt by pressing the idler pulley toward the motor, then slip the belt off the pulley and motor shaft. Remove the mounting screw or clip holding the idler pulley bracket in place and remove the old pulley assembly. Install the new DC93-00634A pulley in the same position and secure it. Route the new belt back around the drum and motor pulley, using the idler pulley to apply tension, matching your photos of the original routing. Reassemble any panels removed for access, restore power, and run a test cycle to confirm the drum spins smoothly and quietly. Tools needed: Phillips or nut driver, putty knife (for panel clips, if applicable). Frequently Asked Questions My dryer's motor runs but the drum won't spin — is this the part? This is the classic "no spin, no start" symptom of a failed idler pulley or a broken drive belt. If the pulley wheel is cracked, seized, or the tensioner arm is bent or broken, the belt loses tension and can no longer transfer power from the motor to the drum. Inspect the belt for damage as well, since a broken belt often accompanies a worn idler pulley. Do I need to replace the drive belt at the same time? Not necessarily, but it's worth inspecting closely while you have the drum accessible. If the idler pulley failed due to age or wear, the belt has often experienced similar stress and may be worn, glazed, or close to failing itself. Many technicians replace both together to avoid a repeat repair. Will this fit my LG or Whirlpool dryer? No — this idler pulley is specific to the Samsung drive belt platform. LG, Whirlpool, GE, and other brands use different idler pulley and belt tensioning designs that are not interchangeable with this part. Confirm your appliance model number before ordering. How long does this repair typically take? Most installers report 30 minutes to 2 hours depending on how much disassembly your specific model requires to access the belt and pulley. Front panel removal is usually the more time-consuming part; the pulley swap itself is quick once accessed. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP WH01X10727 Washer Shock Absorber Replaces Part Numbers: WH01X10727, 3029711, AP5793647, PS8756975.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WP3392519 Genuine OEM Whirlpool Dryer Thermal Fuse The WP3392519 is a genuine Whirlpool OEM thermal fuse mounted on the blower housing next to the blower fan. This fuse is a one-time safety device: as long as the dryer stays within its normal operating temperature, it does nothing at all, but the instant internal temperatures climb high enough — almost always from restricted airflow — the fuse permanently opens the circuit and cuts power to the dryer. That's why a blown thermal fuse produces such a specific symptom: the dryer won't start at all, with no lights, no tumble, and no response, even though the outlet has power. This fuse opens at approximately 196°F (91°C) and terminates in two 3/16" wire terminals for a direct plug-in fit. Unlike a resettable thermostat, this thermal fuse cannot be reset once it blows — it must be replaced. A blown thermal fuse is almost always a symptom rather than a random failure: restricted exhaust venting is the leading cause, since trapped heat is exactly what the fuse is designed to react to. A shorted heating element or a failed regulating thermostat can also cause the dryer to run hot enough to blow the fuse. It directly replaces 3392519, WP3392519VP, AP6008325, 3388651, 694511, ET401, PS11741460, EAP11741460, AH11741460, EA11741460, PD00002311, G4AP0500, and 80005. Quick Answer The WP3392519 Genuine OEM Whirlpool Dryer Thermal Fuse fixes Whirlpool, Maytag, Kenmore, KitchenAid, Roper, Jenn-Air, and Amana dryers that won't start at all — no lights, no tumble, no response to any button. Opens at approximately 196°F (91°C). Two 3/16" wire terminals. Replaces 3392519, WP3392519VP, AP6008325, 3388651, 694511, ET401, PS11741460, EAP11741460, AH11741460, EA11741460, PD00002311, G4AP0500, 80005. Always inspect and clean the dryer venting when replacing this fuse — a blown fuse is a symptom of restricted airflow, and installing a new fuse without fixing the vent will likely blow it again. Common Problems This Part Fixes Dryer won't start at all — no lights, no tumble, no response to any button Dryer that stopped working suddenly, especially after running unusually hot Dryer runs a short time then shuts off completely and won't restart Repeated blown fuses on a dryer with a known venting or airflow restriction Clothes coming out extremely hot right before the dryer stopped working Dryer that recently smelled like burning or overheating before failing Continuity test shows an open circuit across the old fuse Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer thermal fuse directly replaces the following OEM and cross-reference part numbers: 3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101, 6L4101091C, ET401, 3388651, 694511, 80005, AWP47582, PD00002311, EAP11741460, AP6008325, PS11741460 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermal fuse is compatible with select Whirlpool-built dryers across the Whirlpool family of brands, including: Whirlpool electric and gas dryers — WED, WGD series Maytag electric and gas dryers — MEDC, MGDC series (select Whirlpool-built models) Kenmore dryers (select Whirlpool-built models) KitchenAid, Jenn-Air, and Amana dryers (select models) Roper, Estate, Inglis, and Crosley dryers (select models) Verified model numbers include: MEDC465HW0, MGDC465HW0, WED4850HW0, WED4950HW0, WED49STBW1, WET4024HW0, WET4124HW0, WGD4850HW0, WGD4950HW0, YMEDC465HW0, YWED4850HW0, and YWET4024HW0. Note: This fuse also fits select commercial and stacked washer/dryer combination units on the Whirlpool platform. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified opening temperature and terminal configuration One-time safety device that cuts power if the dryer overheats Opens at approximately 196°F (91°C) Resolves "won't start at all," "stopped working suddenly," and "clothes came out extremely hot before it died" symptoms caused by a blown fuse Two 3/16" wire terminal connectors for a direct plug-in electrical fit Mounts to the blower housing next to the blower fan Replaces 3392519, WP3392519VP, AP6008325, 3388651, 694511, ET401, PS11741460, EAP11741460, AH11741460, EA11741460, PD00002311, G4AP0500, and 80005 Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Roper, Jenn-Air, and Amana dryers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WP3392519 Part Type Dryer Thermal Fuse (Thermal Cut-Off) Condition Genuine OEM Brand Whirlpool Opening Temperature Approx. 196°F (91°C) Location Blower housing, next to the blower fan Terminals 2 (3/16" wire terminals) Resettable No — one-time use, must be replaced once blown Dimensions Approx. 2" x 1/2" Repair Difficulty Medium — basic disassembly required Quantity 1 thermal fuse Compatible Brands Whirlpool, Maytag, Kenmore, KitchenAid, Roper, Jenn-Air, Amana, Estate, Inglis, Crosley Installation Notes ⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the blower housing where the fuse is mounted. Photograph the wiring before disconnecting the wire terminals from the old fuse. Remove the mounting screw holding the fuse in place and pull it free, disconnecting both wire terminals. Before installing the new fuse, test it for continuity with a multimeter to confirm it's good out of the box, and test the old one to confirm it's actually blown (no continuity) rather than assuming. This is the most important step: fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. A blown thermal fuse is a symptom of restricted airflow, and skipping this step means the new fuse is likely to blow again. Install the new WP3392519 in the same mounting position, reconnect both wire terminals, and secure the mounting screw. Reinstall the rear panel, restore power, and run a test cycle to confirm normal heating and shutoff behavior. Tools needed: Phillips or nut driver (model-dependent), multimeter, vent brush or vacuum attachment for cleaning ductwork, work gloves. Frequently Asked Questions My dryer has no power at all and the lights won't turn on. Is this the thermal fuse? It's a strong possibility. When this thermal fuse blows, it cuts power broadly enough that the console lights and control panel can go completely dark, not just the heating function — that's a normal result of how this fuse is wired into the circuit. Before replacing it, confirm the outlet has power and the breaker hasn't tripped, then check the fuse for continuity with a multimeter. If it shows no continuity, this fuse is the correct fix, though it's also worth checking the exhaust ducting since that's the most common underlying cause. I replaced the fuse and it blew again. What's going on? This is a strong sign that the underlying cause — almost always restricted airflow — was never addressed. Thermal fuses don't fail from age; they blow because the dryer overheated. If a new fuse keeps blowing, thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. If airflow checks out and the fuse still blows, have the heating element and cycling thermostat checked as well, since a component stuck in the "on" position can also drive excess heat. Can I just reset the thermal fuse instead of replacing it? No. Unlike a cycling thermostat, this thermal fuse is a one-time safety device — once it blows, its internal circuit is permanently broken and it cannot be reset or repaired. Replacement is the only option. My clothes came out extremely hot right before the dryer died. Is that related? Yes, this is a classic warning sign. Clothes coming out unusually hot indicates the dryer was already running hotter than normal, which is exactly the condition that leads to a blown thermal fuse. If you noticed this before the dryer stopped working, it strongly points to a ventilation or airflow problem that should be fully addressed before running the dryer again. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original opening temperature, terminal configuration, and mounting position of the thermal fuse originally installed in your dryer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set - Compatible with Whirlpool, Kenmore, Maytag Product Description Maintain safe and efficient dryer operation with the XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set. This replacement kit includes one cycling thermostat (3387134, L155-25) and one thermal fuse (3392519), designed as a replacement for select Whirlpool, Kenmore, Maytag, and other compatible dryers. The cycling thermostat regulates drum temperature, while the thermal fuse prevents overheating by cutting power if temperatures exceed safe limits. This set addresses issues like overheating, insufficient heat, no heat, or prolonged drying times. Test the thermal fuse first if the dryer won't heat, as it typically fails before the thermostat. Note: Includes (1) cycling thermostat and (1) thermal fuse. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: Cycling Thermostat: WP3387134, 3387134, 3387135, 3387139, 3-6910, 306910, 326801, 661512, L150-15F, L155-25F, AP6008270, PS11741405. Thermal Fuse: 3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101091C, ET401, 3388651, 694511, 80005, PS11741460, AP6008325. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: LE5700XKW0, LE5920XKW0, WED4815EW1, WED4910XQ1, WED5300SQ0 Kenmore: 110.97591420, 110.97591220, 110.97592420, 110.60072990 Maytag: MDE5500AYW, MDE6000AYW, MDE7600AYW Roper: RED4440VQ1, REX5634KQ1 Amana: NED4655EW0 KitchenAid: KEYE760WWH0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Roper, Amana, KitchenAid, and other dryers. 🔧 Specifications: Replacement kit with one cycling thermostat (L155-25 SPST, 120V, 2W) and one thermal fuse (250°F limit, non-resettable). 💪 Reliable Performance: Regulates drum temperature and prevents overheating for safe, efficient drying. 🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves overheating, insufficient heat, no heat, or prolonged drying times. Product Specification Part Number: XPARTCO 3387134 - 3392519 Component Type: Dryer cycling thermostat and thermal fuse kit Material: Plastic and metal Electrical Specs: Cycling Thermostat: 120V, 2W; L155-25 SPST, opens at 155°F, closes at 130°F  Thermal Fuse: 250°F limit, 125/250V, non-resettable Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running safely and efficiently today! Add to cart now for a reliable fix!

Read more less

XPARTCO W11266654 Washer Door Boot Outer Clamp Description: The Outer Door Boot Seal Clamp Washer is a replacement part specific to Whirlpool-brand washing machines. Multiple washers are used behind the outer boot seal clamp to create a uniform, compressed seal around the washer door opening.  Replaces Part Number: W11266654, W10237503, WPW10237503, 4894886, AP6809210, PS12584490, W10818945.    

Read more less

XPARTCO WE25X205 Dryer Drum Bearing The XPARTCO WE25X205 is an aftermarket replacement rear drum bearing kit for GE, Hotpoint, and Kenmore electric and gas dryers. The rear drum bearing supports the back of the drum and lets it turn smoothly and quietly as the belt drives it. When the bearing wears out, the drum starts to squeal, rumble, or grind while it turns, and a badly worn bearing can let the drum sit unevenly or scrape. This is a direct-fit aftermarket replacement for the original GE kit. GE's catalog lists WE25X205 as superseded to WE25M40, and this listing covers both numbers. Because the drum has to come out to reach the bearing, it is a good time to inspect the drum belt, idler pulley, and drum glides and replace any that look worn. Quick Answer The XPARTCO WE25X205 Dryer Drum Bearing fixes a GE, Hotpoint, or Kenmore dryer that squeals, rumbles, or grinds when the drum turns. It replaces the rear drum bearing and is also listed under WE25M40. Classic symptom: a loud squeal or rumble that follows the drum and is there with or without heat. Common Problems This Part Fixes Loud squealing or squeaking while the drum turns Rumbling or grinding noise from the back of the dryer Drum that wobbles, drags, or doesn't turn smoothly Excess vibration during a cycle Noise that continues even when the dryer is running without heat Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This drum bearing kit directly replaces the following part numbers: WE25M40, WE25X205, 784658, WE01X0462, WE01X0463, WE02X0195, WE03M0015, WE03M0065, WE03X0022, WE03X0028, WE03X0031, WE03X0035, WE03X0036, WE03X0039, WE03X0065, WE11X0056, WE11X56, WE1X462, WE1X463, WE25M0040, WE25M40-25PK, WE25X0062, WE25X0205, WE25X205E, WE25X205R, WE25X62, WE25X62R, WE2X195, WE2X195D, WE3M15, WE3M65, WE3X22, WE3X28, WE3X31, WE3X35, WE3X36, WE3X39, WE3X65, AGE25888, AH267529, AP2619300, DE725, EA267529, EAP267529, PD00001078, PS267529, AFP1161113 These numbers span several generations of GE's own part numbering for this bearing kit. Older numbers beyond WE25X205 and WE25M40 are drawn from a retailer cross-reference, so confirm against your dryer's parts diagram or contact our support team if your model calls out a different number. Compatibility This bearing kit is listed for GE, Hotpoint, and Kenmore dryer models, including these examples: GE DDG9680RCM, DDG8580RCM, DDP1380GFM, DDE058DGAL, DDE8200GBL GE DHSR333GV0WB, DWXQ473T0WW, DPXR475EW0AA, DPXR475EW0WW, DPSR475EW0AA Note: The models above are a sample, not a full list. Retailers also reference this kit for some Fisher & Paykel dryers, which we could not confirm by model. Enter your model number at checkout or contact our support team to verify fit before ordering. Key Features Direct-fit aftermarket rear drum bearing kit for GE-built dryers Restores smooth, quiet drum rotation Covers both WE25X205 and its superseding number, WE25M40 Fixes squealing, rumbling, and grinding drum noise Fits GE, Hotpoint, and Kenmore dryers Product Specifications Part Number WE25X205 OEM Part Number WE25X205, WE25M40 Part Type Dryer Rear Drum Bearing Kit Condition Aftermarket Replacement Location Rear of Drum Application GE, Hotpoint & Kenmore Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. Remove the top and front panel as shown in your model's service guide, then lift the drum belt off and slide the drum out, which is easier with a second person. Remove the old rear bearing from the back panel, install the new one in the same position, and reassemble in reverse order. Check the belt, idler pulley, and drum glides while the drum is out and replace any that are worn. Plan on about 30 minutes to 1 hour. Frequently Asked Questions My dryer squeals when the drum turns. Is this the part I need? A squeal that follows the drum is most often a worn rear drum bearing, though a worn idler pulley or drum glides can make similar noise. If you can spin the drum by hand and feel roughness or hear grinding, the bearing is a likely cause. What's the difference between WE25X205 and WE25M40? GE's catalog lists WE25X205 as superseded to WE25M40, and retailers list them as interchangeable. This listing covers both numbers. Should I replace the drum belt at the same time? It's a good idea. The drum has to come out to reach the bearing, so this is the easiest time to inspect the belt, idler pulley, and drum glides and replace anything worn. Will this fit my dryer? It is listed for many GE, Hotpoint, and Kenmore dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM WE04X24550 Dryer Timer The Genuine OEM GE WE04X24550 is a mechanical dryer timer. It controls the dryer's cycle duration and its electrical components, advances the cycle through its stages, and shuts the dryer off at the end of the cycle. When the timer fails, the dryer may not start, tumble endlessly, shut off early, or have a timer knob that won't advance. This is the original GE part, and it is a direct replacement for the earlier WE04X24549 timer. It is listed for select GE dryers, both gas and electric. Check your model number before ordering, since timers differ between dryer families. Quick Answer The Genuine OEM WE04X24550 Dryer Timer fixes a GE dryer that tumbles endlessly, shuts off early, won't start, or has a timer knob that won't advance because the timer has failed. It replaces WE04X24549. Classic symptom: the dial doesn't advance, or the dryer runs without ever shutting off at the end of the cycle. Common Problems This Part Fixes Dryer tumbles endlessly and doesn't shut off Dryer shuts off early Timer knob won't advance Dryer won't start, or starts and then stops Controls that don't respond, or heat that doesn't come on Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer timer directly replaces the following part numbers: WE04X24550, WE04X24549, 234D2377P003, 234D2377P004, 4546121, TMD14M30, TMD16M12, AGE25986, AP6031056, FIX11763064, OEM18093177, PD00039467, PS11763064 WE04X24549 is the earlier GE number, and WE04X24550 was designed as its direct replacement. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number. Compatibility This timer is listed for GE gas and electric dryers, including these examples: GTD42GASJ0WW, GTD42GASJ1WW, GTD42GASJ3WW, GTX42GASJ1WW, GTX42GASJ3WW GTD48GASW0WB, ETD48GASW0WB, GTD48EASW0WB XTD72G8ST0WS, XTD72E8ST1WS Note: The models above are a sample from one retailer, not a full list. The timer's fit depends on the dryer family, so confirm your model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Genuine OEM GE mechanical dryer timer Controls cycle duration and advances through the cycle stages Handles end-of-cycle shutoff Direct replacement for WE04X24549 Fits select GE gas and electric dryers Product Specifications Part Number WE04X24550 OEM Part Number WE04X24550 Part Type Dryer Timer (Mechanical) Condition Genuine OEM Dimensions 4" D x 3" H x 2" W Application GE Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. Remove the console as shown in your model's service guide to reach the timer. Photograph the wiring, or note each wire's position, before disconnecting it, then move the connectors to the new timer, mount it, and refit the knob. Test every cycle selection before closing the dryer. This repair involves electrical components, so consult a qualified technician if you are not comfortable with it. Frequently Asked Questions My dryer won't shut off, or the knob won't advance. Is this the part I need? A worn or stuck timer is a common cause of endless tumbling, early shutoff, and a knob that won't move. If the dryer won't start or heat, check the door switch, thermal fuse, and heating components too, then test the timer with a multimeter against your wiring diagram. Is WE04X24550 the same as WE04X24549? WE04X24550 was designed as the direct replacement for WE04X24549, and this timer covers both numbers. Is this a hard repair? Retailers rate it medium difficulty because it involves electrical components. Photograph the wiring before you start, and consult a technician if you are unsure. Will this fit my dryer? It is listed for select GE gas and electric dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

022112-000 Genuine OEM NIPPLE 1/2 NPT Models that Have Used This Part DGVU2004B DGVU260-5B   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 3394652 Dryer Drum Belt The XPARTCO 3394652 is an aftermarket replacement drum belt for Whirlpool electric and gas dryers, and also fits select Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea models. This belt circles the drum and attaches to the motor pulley and idler pulley, transmitting the motor's rotation to spin the drum and keep clothes tumbling evenly throughout the drying cycle. Measures approximately 79-1/8" long, 1/4" wide, flat with 4 ribs and 3 grooves. Over time, the belt wears down or snaps from constant friction and tension. If the dryer's motor is running but the drum won't turn, this belt has likely broken or worn through. Symptoms of a failing belt include the drum not spinning, the dryer failing to start, unusual or loud noise, no heat or insufficient heat, drying taking too long, a burning smell, or the touchpad not responding. It directly replaces AP2946614, 26000345675, 2823, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER3394652, ER345675, LB278, P46-153, PS345337, and TJ90LP278. Quick Answer The XPARTCO 3394652 Dryer Drum Belt fixes Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea electric and gas dryers where the drum isn't spinning, the dryer won't start, or you hear squealing or loud noise. 79-1/8" long, 1/4" wide, flat, 4 ribs, 3 grooves. Replaces AP2946614, 26000345675, 2823, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER3394652, ER345675, LB278, P46-153, PS345337, TJ90LP278. If the motor runs but the drum won't turn, that's the classic sign of a broken or worn-through belt. Common Problems This Part Fixes Motor runs but the drum won't turn Dryer won't start at all Unusual or loud noise, including squealing No heat or insufficient heat Drying takes too long Burning smell during operation Touchpad not responding Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer drum belt directly replaces the following OEM and cross-reference part numbers: 3394652, 26000345675, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER345675, LB278, P46-153, AP2946614, AWP39138, PD00004694, PS345337, TJ90LP278 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select Whirlpool electric and gas dryers, and also fits select Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea dryers built on the same platform, including model numbers such as: WET4024HW, WET4024EW, LDR3822PQ, LTE5243DQ, LTG5243DQ 3LTE5243BN0, 3LTE5243BW0, 8LDR3422YG0, 8LDR3822DZ0 BYCCD3421W0, BYCCD3421W1, BYCCD3421W2, BYCCD3421W3, BYCCD3921W0 LDR3422AN0, LDR3422AW0, LDR3822BN0, LDR3822BW0, LDR3822DQ1, LDR3822DQ2, LDR3822DZ1, LDR3822DZ2, LDR3822HQ0 LE4900XTG2, LE4900XTN2, LE4900XTW2, LE4930XTN2, LE4930XTW2 LER3422AN0, LER3422AW0, LER3622BN0, LER3622BW0, LER3622DQ1, LER3622DQ2, LER3622DZ1, LER3622DZ2, LER3622HQ0 LG4931XTW2, LGR3422AN0, LGR3422AW0, LGR3622BN0, LGR3622BW0, LGR3622DQ1, LGR3622DZ1 LTE5243BN0, LTE5243BN1, LTE5243BN2, LTE5243BW0, LTE5243BW1, LTE5243BW2, LTE5243DQ0, LTE5243DQ1, LTE5243DZ0, LTE5243DZ1 LTG5243BN0, LTG5243BN1, LTG5243BN2, LTG5243BW0, LTG5243BW1, LTG5243BW2, LTG5243DQ0, LTG5243DQ1, LTG5243DZ0, LTG5243DZ1 REC3422AL1, REC3422AW1, REC3622BL0, REC3622BW0 Note: Always verify your full model number before ordering, since Whirlpool uses several different belt lengths across its dryer lineup. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement drum belt — attaches to the motor pulley and idler pulley to spin the drum Resolves "motor runs but drum won't turn," "won't start," "loud noise," and "no heat" symptoms Flat design with 4 ribs and 3 grooves for secure grip and smooth rotation Approximately 79-1/8" long, 1/4" wide Direct drop-in replacement matching the original length and profile Replaces AP2946614, 26000345675, 2823, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER3394652, ER345675, LB278, P46-153, PS345337, and TJ90LP278 Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea electric and gas dryers Aftermarket replacement built to OEM-equivalent quality standards Typically a 15 to 30 minute DIY repair Product Specifications Part Number 3394652 OEM Part Number 3394652 Part Type Dryer Drum Belt Condition Aftermarket Replacement Length Approx. 79-1/8" Width 1/4" Profile Flat, 4 ribs, 3 grooves Function Transmits motor rotation to spin the drum Repair Difficulty Easy — 15 to 30 minutes Quantity 1 drum belt Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, Ikea Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the top and front panels of the dryer to access the drum and belt path. Release tension from the idler pulley and remove the old belt. Wrap the new 3394652 belt around the drum, motor pulley, and idler pulley, making sure it seats correctly in the grooves along the entire path. Pull the belt tight and reapply tension through the idler pulley. Before closing everything up, rotate the drum by hand to confirm smooth movement without hesitation. Reassemble the front and top panels. Restore power and run a test cycle to confirm the drum tumbles smoothly with no unusual noise. Tools needed: multi-screwdriver, putty knife, work gloves. Frequently Asked Questions The motor is running but the drum won't turn. Is this the belt? Yes, this is the classic and most reliable sign of a broken drum belt. If you can hear the motor running normally but the drum itself stays still, there's a good chance the belt has snapped or worn through and is no longer connecting the motor's rotation to the drum. My dryer isn't heating. Could the belt really be involved? On some models, yes indirectly — a broken belt can affect a door switch or safety interlock that also gates the heating circuit, so a belt failure can occasionally present as a no-heat or insufficient-heat symptom in addition to the more obvious lack of tumbling. Is this a difficult repair? It's a moderate repair requiring basic hand tools and some dryer disassembly, typically taking 15 to 30 minutes. Removing the top and front panels to access the drum and belt path is the most involved part of the process. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the length, width, and rib pattern of the original 3394652 drum belt used in compatible Whirlpool, Kenmore, Maytag, and related electric and gas dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WP8182528 Dryer Genuine OEM Heating Element Replaces Part Numbers: WP8182528, 8182528, 1065644, AP6011812, PS11745011.  Description: Upgrade your dryer's heating element with the WP8182528 Genuine OEM Heating Element. This high-quality replacement part will ensure efficient and reliable heat distribution, giving your clothes that perfect dry every time. Trust in its durability and compatibility with your dryer model.

Read more less

341241 Dryer Genuine OEM Drum Belt The 341241 is a Genuine OEM dryer drum belt compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, and Ikea. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry. Made from high-strength rubber with reinforced ribs, this belt measures 92-1/4 inches long x 1/4 inch wide and features 4 ribs and 3 grooves. It is flat on one side and ribbed on the other, and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It also replaces some 5-rib, 4-groove belts. Installs in 30–45 minutes with basic hand tools. Quick Answer The 341241 Dryer Genuine OEM Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, and more. Measures 92-1/4" L x 1/4" W with 4 ribs and 3 grooves. Common Problems This Part Fixes Dryer drum not spinning — motor runs but drum stays still Clothes not tumbling during the drying cycle Thumping, squealing, or slapping noise during operation Dryer runs but produces no heat because drum is stationary Burning rubber smell coming from the dryer Visible broken or frayed belt pieces found inside the dryer cabinet Clothes taking too long to dry due to drum not rotating at correct speed Replaces Part Numbers This drum belt directly replaces the following OEM and cross-reference part numbers: 341241, 14210003, 2008, 26000341241, 26000349533, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 341241VP, 345473, 349533, 529597, 53-0186, 53-1080, 53-1086, 53-1528, 53-1589, 53-2671, 53-2910, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8206, 8210, 920H4, 920H5, 99906951, 99989673, 99989674, FSP341241, LB276, LB279, P46-037, P46-149, W10127457, W10131364, AH346995, AP32, EA346995, ER341241, AWP39161, PD00002263, EAP346995, AP2946843, PS346995, TJ341241. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select dryers from the following brands: Whirlpool dryers (gas and electric) Kenmore / Sears dryers (select models) Maytag dryers KitchenAid dryers Amana dryers Roper dryers Admiral dryers Jenn-Air dryers Estate dryers Magic Chef dryers Crosley dryers Inglis dryers Norge, Modern Maid, Hardwick, Caloric, and Ikea dryers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle 92-1/4" length x 1/4" width — 4-rib, 3-groove design; flat on one side, ribbed on the other Also replaces some 5-rib, 4-groove belts — wide cross-compatibility across Whirlpool-family models Made from high-strength rubber with reinforced ribs — resists cracking, stretching, and heat damage Direct replacement for OEM part numbers 341241 and 8066065 — no modification required Compatible with over a dozen major appliance brands built on the Whirlpool platform Genuine OEM part — factory-exact fit, materials, and dimensions DIY-friendly repair — installs in 30–45 minutes with basic hand tools Often replaced together with the idler pulley (691366) and drum rollers (349241T) for a complete drum drive repair Product Specifications Part Number 341241 Part Type Dryer Drum Drive Belt Condition Genuine OEM Application Gas and Electric Dryers Length 92-1/4 inches Width 1/4 inch Ribs 4 ribs, 3 grooves Profile Flat on one side, ribbed on the other Material High-strength rubber with reinforced ribs Color Black Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, Ikea Often Replaced With 691366 Idler Pulley, 349241T Drum Rollers Installation Notes ⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen, then unscrew the two Phillips screws inside the lint filter housing. Use a putty knife 2 inches from each front corner to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release belt tension at the idler pulley, lift the drum slightly, and slide the old belt off. Loop the new 341241 belt around the drum with the ribbed side facing down (toward the drum). Route the belt around the idler pulley and motor pulley — consult your model's service manual or a model-specific video for the correct belt path. Reassemble and run a test cycle. Tip: While the drum is out, inspect and replace the idler pulley (691366) and drum rollers (349241T) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool. Frequently Asked Questions How does the 341241 differ from the W10205415 and 6602-001655 belts? All three are 92-inch dryer drum belts, but they differ in width and rib count. The 341241 is 1/4" wide with 4 ribs and 3 grooves. The W10205415 is 3/8" wide with 5 ribs and 4 grooves. The 6602-001655 is 5/16" wide with 5 ribs and 4 grooves designed for Samsung dryers. Always match the part number to your specific model — do not substitute based on appearance alone. Will this belt fit my Kenmore dryer? Many Kenmore dryers — especially the popular 110-series — are manufactured by Whirlpool and use the 341241 belt. Check your model number against the compatibility list and contact our support team if you need help confirming the fit before ordering. How do I know if my drum belt needs to be replaced? The most obvious sign is that the dryer motor hums but the drum does not spin. You may also notice a thumping or slapping sound during operation, a burning rubber smell, or clothes that are damp after a full cycle. Open the dryer cabinet to visually confirm if the belt is broken, frayed, or stretched. Should I also replace the idler pulley and drum rollers? Yes — since the dryer is already disassembled, it is highly recommended to inspect and replace the idler pulley (691366) and drum support rollers (349241T) at the same time. These parts wear at a similar rate and replacing all three together — often sold as a repair kit — prevents having to disassemble the dryer again in the near future. Is this an OEM or aftermarket part? This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same belt that came installed in your dryer from the factory — same materials, dimensions, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

XPARTCO WE01X20374 Dryer Timer Knob The XPARTCO WE01X20374 is an aftermarket replacement timer knob for GE dryers, and also fits select Hotpoint and RCA models. Located on the control panel, this knob mounts onto the timer's D-shaped shaft and lets you set desired drying times and select additional functions like air fluff or wrinkle release cycles. White in color, with a D-shaped opening for the timer shaft. Causes of a faulty timer knob include wear from repeated grasping and twisting over years of use, or exposure to high dryer temperatures degrading the knob material over time. Symptoms of a damaged timer knob include difficulty rotating the knob smoothly to desired time settings, the dryer not initiating cycles properly based on knob position, a loose or wobbling knob that could fall off, or cracking, chipping, or discoloration on the knob exterior. It directly replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912. Quick Answer The XPARTCO WE01X20374 Dryer Timer Knob fixes GE, Hotpoint, and RCA dryers with a knob that's hard to turn, doesn't properly select cycle settings, wobbles or feels loose, or shows cracking, chipping, or discoloration. White, D-shaped opening. Replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912. This is the correct knob to pair with certain GE dryer models where the similarly-numbered WE1M654 knob is not the right fit and can throw off cycle timing. Common Problems This Part Fixes Difficulty rotating the knob smoothly to desired time settings Dryer not initiating cycles properly based on knob position Loose or wobbling knob that could fall off Cracking, chipping, or discoloration on the knob exterior Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer timer knob directly replaces the following OEM and cross-reference part numbers: WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This timer knob is compatible with select GE dryers, and also fits select Hotpoint and RCA dryers built on the GE platform. Note — not the same as WE1M652 or WE1M654: These are separate, similarly-styled knobs used on other GE/Hotpoint models. GE's own support has confirmed cases where installing WE1M654 on the wrong model throws off cycle timing, and WE01X20374 is the correct part in those situations. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which knob your dryer needs. Key Features Aftermarket replacement timer knob — direct interface for setting drying time and cycle functions Resolves "hard to turn," "won't select cycle correctly," "loose/wobbling," and "cracked or discolored" symptoms White finish, D-shaped opening for the timer shaft Direct drop-in replacement — no tools required for most installations Replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912 Compatible with GE, Hotpoint, and RCA dryers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPWE01X20374 OEM Part Number WE01X20374 Part Type Dryer Timer Control Knob Condition Aftermarket Replacement Color White Shaft Opening D-shaped Extended Shaft 1/8" Repair Difficulty Very Easy — no tools typically required Quantity 1 timer knob Compatible Brands GE, Hotpoint, RCA Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power at the outlet before beginning. Remove the old knob by pulling it straight off the control shaft — no tools are typically required. Align the D-shaped socket on the new WE01X20374 with the flat side of the timer shaft, then press the new knob firmly onto the shaft until it's fully seated. Restore power and test that the knob turns the timer setting correctly through its full range, confirming the dryer starts and progresses through the cycle as expected. Tools needed: none typically required. Frequently Asked Questions My knob spins freely or feels loose. Is this the right part? Yes, this is one of the most common symptoms this knob resolves. If the knob's D-shaped socket has worn out or become stripped, it can no longer grip the timer's shaft properly, letting the knob spin, wobble, or feel loose without actually turning the internal timer mechanism. I was told my knob replacement threw off my drying time. Is WE01X20374 the fix? It can be, depending on your model. GE's own support has addressed a case where a similarly-numbered knob, WE1M654, was installed on the wrong model and caused the cycle to cut off before reaching the true "off" position — the customer was told the correct part for their model was WE01X20374. If your timing seems off after installing a different knob, double-check whether WE01X20374 is the correct part for your specific model. Is this a difficult repair? No, it's one of the simplest dryer repairs — the old knob pulls straight off the shaft and the new one presses straight on, with no tools needed. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the size, D-shaped shaft fit, and white finish of the original WE01X20374 timer knob used in compatible GE, Hotpoint, and RCA dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less