WPW10481149 Dishwasher Touchpad and Control Panel
Fits Specific KitchenAid Dishwasher Models
Color: White
Replaces Part Numbers: WPW10481149, W10356933, W10481149, AP6022134, PS11755463.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
TJGC20C-3131-48 3/8" ID (1/2" OD) Coated Stainless Steel Gas Connector 1/2" MIP x 1/2" MIP (48" Length)
Description
This 1/2 inch OD, 3/8 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch MIP adapters and is 48 inches in length. This CSA approved Safety Shield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters.
Features
Designed and certified by CSA for indoor and outdoor use
Premium antimicrobial coating for increased safety, durability, and longevity
Limited lifetime warranty
100 Percent factory leak tested
304 Stainless steel
Specs
–
Outlet Type:
MIP
Material:
Stainless Steel
Application:
Plumbing
OD:
1/2"
Product Type:
Gas Valve
ID:
3/8"
Size:
1/2"
Connection Type:
MIP x MIP
Length:
48"
Length (Inches):
48"
Inlet Type:
MIP
8558953 Dishwasher Touchpad and Control Panel
Genuine OEM
Fits Specific Kenmore Dishwasher Models
Replaces Part Numbers: WP8558953, 8558953, 1066185, 8558928, 8563373, AP6013229, PS11746451.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
5304517587 Dishwasher Switch Assembly
Description: The Switch Assembly is an OEM replacement part for specific Frigidaire dishwasher models. It contains a touchpad and electronic controls that operate wash cycles and drying features.
Replaces Part Numbers:5304517587, 4840235, AP6802340, PS12585690.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WD13X10031 Dishwasher Genuine OEM Door Latch
Replaces Part Numbers: WD13X10031, 1088549, AH959002, EA959002, AP3778749, PS959002.
Description: This dishwasher door latch, model WD13X10031, is a genuine OEM part. It ensures a secure and reliable closure of your dishwasher door, preventing any leaks and ensuring effective cleaning. With this product, you can have peace of mind knowing your dishes will be washed efficiently and without any hassle.
XPARTCO W10849499 Dryer Drum Belt
The XPARTCO W10849499 is an aftermarket replacement drum belt for Whirlpool's large-capacity dryer platform. The belt wraps all the way around the outside of the drum, passes around the idler tension pulley, and loops around the drive motor pulley — that belt is the only mechanical connection between the motor and the drum, so when it breaks, the console still lights up, the motor still hums, and the blower still moves air, but the drum sits completely still. Open the door and spin the drum by hand and it will turn freely with no resistance.
This belt measures approximately 97.75 inches long. Belts fail from age and heat: the rubber hardens over years of thermal cycling, the ribs glaze over and begin slipping under a heavy wet load, and eventually the belt cracks through or snaps outright. A worn or seized idler pulley is also a common root cause of premature belt failure, since a pulley that won't turn freely forces the belt to drag continuously against a stationary surface until it shreds. Squealing or chirping at startup, a rhythmic thump timed to drum rotation, fraying at the edges, or black rubber dust in the cabinet are all signs a belt is near the end of its life. As an aftermarket replacement, the W10849499 is built to OEM-equivalent quality standards. It directly replaces AP5989682, 4383705, PS11731121, and W10610882.
Quick Answer
The XPARTCO W10849499 Dryer Drum Belt fixes Whirlpool large-capacity dryers where the motor runs but the drum won't turn, the drum spins freely by hand, or the dryer squeals, chirps, or thumps during operation. Approximately 97.75" long. Replaces AP5989682, 4383705, PS11731121, W10610882. If your belt broke due to a worn idler pulley rather than simple age, replace the pulley (PS334244) at the same time or the new belt will wear out quickly too.
Common Problems This Part Fixes
Dryer runs and hums but the drum does not turn — the classic broken belt symptom
Drum spins freely by hand with no resistance when the door is open
Loud squealing, chirping, or scraping noise from inside the dryer
Rhythmic thumping or slapping noise timed to drum rotation — cracked or split belt
Drum turns slowly, intermittently, or stalls under a heavy wet load — glazed belt slipping
Clothes not drying completely, or drying taking longer than it used to
Broken belt pieces or fragments found inside the drum
Visible cracking, fraying, glazing, or stretching on the old belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
W10849499, W10610882, AP5989682, 4383705, AWP42591, EAP11731121, OEM17969055, PD00046442, PS11731121
W10610882 was the immediately preceding number for this same belt. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select large-capacity Whirlpool-built dryers across the Whirlpool family of brands, including:
Whirlpool large-capacity electric and gas dryers
Maytag dryers (select Whirlpool-built models)
KitchenAid, Jenn-Air, and Amana dryers (select models)
Magic Chef, Admiral, Norge, Roper, and Inglis dryers (select models)
Select Kenmore and Ikea dryers built on the Whirlpool platform
Verified model numbers include: YWED8500DC, YWED8000DW, YWED8500DW, 7MWGD8000E, and 7MWGD8500E.
Note: Whirlpool uses several different drum belt lengths across its dryer lineup, and this one is approximately 97.75" long — different from the shorter belts used on other Whirlpool-built platforms. Belts of a similar rib profile but a different length are not interchangeable; a belt that's too long or short for your drum will slip, walk off the pulley, or fail to seat properly. Verify your model number, or measure your old belt end to end, before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement drum belt for Whirlpool's large-capacity dryer platform
Approximately 97.75" in length
Wraps around the drum, idler tension pulley, and drive motor pulley to transfer motor rotation to the drum
Resolves "motor runs but drum won't turn," "squealing or chirping," and "drum spins freely by hand" symptoms
Direct drop-in replacement — no cutting, splicing, or modification required
Replaces W10610882, AP5989682, 4383705, and PS11731121
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Inglis, and Kenmore large-capacity dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10849499
OEM Part Number
W10849499 (formerly W10610882)
Part Type
Dryer Drum Drive Belt
Condition
Aftermarket Replacement
Application
Whirlpool Large-Capacity Dryers
Length
Approx. 97.75 in.
Routing
Around drum → idler tension pulley → drive motor pulley
Fuel Type
Electric and gas dryers
Companion Part
Idler pulley PS334244 (check/replace if belt failed prematurely)
Quantity
1 belt
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Inglis, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — A Second Person Helps Support The Drum Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. On many large-capacity models, both the front and rear panels need to come off to fully access the belt and drum, so budget extra time compared to a simpler platform. Photograph how the old belt routes around the drum, the idler pulley, and the motor pulley before removing anything. Loosen and remove the motor mount or bracket as needed to slip the old belt free, and check the idler pulley by spinning it with your fingers — if it's stiff, gritty, or doesn't spin freely, replace it at the same time, since a worn pulley is a common cause of premature belt failure and will shorten the life of the new belt. With the front panel off, the drum may need to be supported by hand as it comes free — having a second person hold the drum steady makes this significantly easier and reduces the risk of scratching the drum or dropping it. Vacuum out accumulated lint while the cabinet is open. Place the new belt around the drum, seat it in the polished wear track left by the old belt, then route it around the idler pulley and around the motor pulley. Reinstall the motor mount, rotate the drum by hand to confirm the belt tracks straight and stays centered, then reassemble the front and rear panels. Restore power and run a short empty cycle listening for squeal or thump before loading it. Tools needed: nut driver or bit driver, open-end wrench, Phillips screwdriver, work gloves, and ideally a second person to support the drum.
Frequently Asked Questions
How do I confirm the belt is broken and not the motor?
With the dryer unplugged, open the door and try to spin the drum by hand. An intact belt gives firm resistance, because you're turning the motor and idler through the belt. If the drum coasts freely like a bicycle wheel, the belt is broken or has jumped off its pulleys. Sound is the other tell: with a broken belt the motor hums and the blower whooshes normally, so the dryer sounds like it's running perfectly while the drum sits still.
My belt broke and I noticed the idler pulley felt stiff. Do I need to replace that too?
Yes, strongly consider it. A worn or seized idler pulley is a well-documented cause of belt failure — if the pulley can't spin freely, it drags against the belt continuously instead of rolling with it, which wears through even a brand-new belt quickly. If your old belt broke and the pulley feels stiff, gritty, or doesn't spin smoothly when you turn it by hand, replace the idler pulley (part PS334244) along with the belt to avoid repeating this repair soon.
Is this the same length as your other Whirlpool dryer belt listings?
Not necessarily — Whirlpool uses different belt lengths across different dryer platforms even when the rib profile looks similar. This belt is approximately 97.75" long, which is specific to the large-capacity platform it's designed for. Always check your model number or measure your old belt's total length before ordering, since a belt of the wrong length will not seat and tension correctly.
Why does replacing this belt need two people?
On this large-capacity platform, accessing the belt often means removing the front panel and freeing the drum, which is heavy and can be awkward to support single-handedly while also working with your other hand. A second person holding the drum steady while you route the new belt reduces the risk of the drum shifting, scratching the finish, or being dropped. It's not strictly required, but it makes the job considerably easier.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the approximately 97.75" length and rib profile of the original W10849499 / W10610882 belt used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, and related large-capacity dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM GE Range Hood Part
WB26X30785 Range Hood Genuine OEM Blower Motor Assembly
A complete manufacturer-approved blower assembly designed to circulate air and help remove cooking grease, smoke, steam, and odors from the kitchen.
Product Overview
The GE WB26X30785 Range Hood Blower Motor Assembly is the main air-moving component inside compatible range hoods. When the hood fan is switched on, the motor turns the blower wheel to pull air through the filters and move smoke, steam, grease, and cooking odors through the venting system or recirculation path.
This is a new Genuine OEM GE replacement part manufactured to the original equipment specifications. The assembly includes the blower motor and blower wheel, helping provide a more complete repair than replacing an individual motor component alone.
Quick Answer
WB26X30785 is a Genuine OEM GE range hood blower motor assembly that includes the motor and blower wheel. It replaces previous GE part number WB26X27202 and is used in select GE range hood models. Always verify your complete appliance model number before ordering.
Common Problems This Part May Fix
Range hood fan does not run
Blower starts intermittently or stops during use
Weak or reduced airflow
Smoke and cooking odors are not being removed properly
Grinding, rattling, humming, or scraping noise from the blower area
Blower wheel is damaged, loose, or difficult to turn
Replaces Part Numbers
WB26X30785, WB26X27202, AGE22285, AP6880846, EAP12716502, PD00066165, PS12716502.
WB26X30785 is the current manufacturer part number. Cross-reference numbers are included only to help identify the same component; order by your appliance model whenever possible.
Compatibility
Designed for select GE range hood models that specify part number WB26X30785 or the superseded number WB26X27202. Confirmed model examples include:
JVX5300EJ1ES
JVX5300SJ2SS
JVX5360DJ2WW
JVX5360EJ2ES
JVX5360SJ2SS
Important: This is a partial compatibility list. Range hood parts can look alike while using different mounting points, wiring connectors, motor ratings, or blower-wheel designs. Verify the complete model number from the hood identification label before purchasing.
Key Features
Genuine OEM GE replacement part
Complete blower motor and blower wheel assembly
Moves air through the range hood ventilation system
Helps remove grease, smoke, steam, and cooking odors
Manufactured for original fit and performance
Direct replacement when WB26X30785 is specified
Supersedes GE part number WB26X27202
Product Specifications
Manufacturer Part Number
WB26X30785
Brand
GE Appliances
Part Type
Range Hood Blower Motor Assembly
Condition
New
Quality
Genuine OEM
Application
Range Hood / Vent Hood
Assembly Includes
Blower Motor and Blower Wheel
Primary Function
Circulates air through the hood ventilation system
Package Quantity
1 Blower Motor Assembly
Installation Notes
Disconnect the range hood from electrical power or switch off the correct house circuit breaker before beginning service.
Remove the grease filters and any covers needed to access the blower compartment.
Photograph or label the wire connections before disconnecting the original motor assembly.
Inspect the wiring harness, connector, capacitor, mounting hardware, and vent path for additional damage or blockage.
Remove the old blower assembly and install WB26X30785 in the same position, using the original hardware when required.
Confirm that the blower wheel turns freely and does not contact the housing before reassembling the hood.
Restore power only after all covers, filters, and safety components are correctly reinstalled.
Safety: Electrical diagnosis and installation should be performed by a qualified technician when you are not experienced with appliance repair. Do not work on the hood while power is connected.
Frequently Asked Questions
Is WB26X30785 a genuine GE part?
Yes. WB26X30785 is a Genuine OEM GE Appliances replacement blower motor assembly.
What is included with the assembly?
The assembly includes the blower motor and blower wheel used to move air through the range hood.
Which part number does WB26X30785 replace?
WB26X30785 replaces the previous GE manufacturer part number WB26X27202.
Will this part fit every GE range hood?
No. It fits only select models. Compare your complete range hood model number and required manufacturer part number before ordering.
Can this assembly fix a noisy range hood?
It may correct noise caused by a worn motor, damaged blower wheel, loose shaft, or internal blower failure. First check the filters, ductwork, mounting hardware, and blower housing for obstructions or loose components.
Shop With Confidence
Purchase the correct Genuine OEM replacement part for dependable fit and performance. Verify your complete range hood model number before ordering, and contact our parts team when compatibility assistance is needed.
Genuine OEM GE Fast U.S. Shipping Compatibility Support Secure Checkout
20A Ceramic Fuse 6.35 x 32 mm, 20A 250V - Compatible with GE, Whirlpool, Kenmore, Maytag, Frigidaire, LG, Samsung and Other Appliances
Product Description
Protect your appliances with the replacement 20A Slow-Blow Ceramic Fuse 6.35 x 32 mm, 20A 250V. This high-quality time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances like microwaves, washers, dryers, and spa control systems. With a ceramic body for durability and heat resistance, this fuse (6.35 x 32 mm, 20A, 250V AC) safeguards circuits from over current and short circuits while tolerating brief surges. It addresses issues like appliance failure, power loss, or blown fuses.
Note: Includes one ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements.
Replaces part numbers: EXP20A, MDA-20, 0326020.HXP, 0326020.MXDP, BK1-MDP-20-R, BK-MDP-V-20-R, GSA20, 8020.0605, 8020.0605.G, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WP4375321, W11305892, W11305905, AP6009296, PS11742452, 3601-001198, AP4046006, PS4131369, 5F1CD2031S, AP4565040, 1206681, 4922155, WB27X11151, AP4980434, PS3486702, WB27X11151, AP4980434, PS3486702, WB2X3910, PS242167, AP2010811, WB2X3910, WB27X995, WB27X945, B27X10388, PS239525, AP2631556, WP8183507, 8183507, PS11745084, AP6011884, M0805101, AP6014669, PS11747931, WPM0805101, 5304423383, PS472662, AP2151673, EA472662, WB27X10928, AP3994062, WB27X10388, AH1481237, EA1481237, PS1481237, W11707984, W10138793, AP7225218, PS17629444, 3B74133Q, AP4440371, PS3522743, 5F1CD0202S, 5F1CD2031S, 3B74133K. AH3522741, EA3522741, AP4438152, PS3522741.
Compatibility:
Compatible with appliances including but not limited to:
GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04
Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0
Kenmore Microwaves: 721.62649200, 665.68612800
Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0
Whirlpool Dryers: WED5300SQ0
Balboa Spa Control Systems: 30123
Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 20A 250V slow-blow fuses
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, LG, Samsung and other appliances requiring 6.35 x 32 mm, 20A 250V fuses.
🔥 Specifications: replacement slow-blow ceramic fuse, 6.35 x 32 mm (1/4" x 1-1/4"), 20A, 250V AC, ceramic body, time-delay, 3.35–3.5 mOhms resistance, cylindrical, holder/clip mount.
💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes.
🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and spa systems.
Installation Notes:
Safety First: Disconnect the appliance from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today!
Add to cart now for a budget-friendly fix!
