2 Pack - XPARTCO 4933DD3001B Dishwasher Door Hinge Cable – Compatible with LG & Kenmore Dishwashers
Product Description
Restore smooth and controlled dishwasher door movement with the XPARTCO 4933DD3001B Dishwasher Door Hinge Cable. This high-quality aftermarket replacement connects the dishwasher door to the hinge spring system, allowing the door to open and close evenly without slamming or dropping. A worn or broken hinge cable can cause the door to fall open, feel too heavy, or fail to stay balanced. Replacing it with this durable XPARTCO cable helps restore proper door tension and safe operation.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts designed to meet OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
4933DD3001B, 1395107, 4933DD3001A, PD00001803, EAP3524406, AH3524406, AP4511304, EA3524406, PS3524406
Compatibility
This replacement dishwasher door hinge cable fits select LG and Kenmore (LG-manufactured) dishwashers.
Example compatible models include (but are not limited to):LG LDF7811ST, LDF6920STKenmore 795.13293K701, 795.13299K701
Always verify your dishwasher’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit, length, and tension performance
🚪 Restores Proper Door Balance – Prevents door from dropping or slamming
💪 Durable Steel Cable – Designed to withstand repeated door cycles
💰 Cost-Effective Repair – Reliable alternative to OEM hinge cables
🛡️ Fixes Common Issues – Solves loose door, uneven opening, or excessive door weight
📐 Product Specification
Part Number: 4933DD3001B
Component Type: Dishwasher Door Hinge Cable
Material: Braided steel cable with end fittings
Application: Door hinge and spring tension system
Installation Side: Typically used on left or right side (model dependent)
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Disconnect power to the dishwasher before servicing. Door springs are under tension—use caution during installation.
Basic Steps:
Disconnect dishwasher power.
Remove the lower access panel.
Carefully release tension from the old hinge cable.
Remove the damaged cable from the hinge and spring.
Install the new XPARTCO 4933DD3001B cable in the same routing.
Reattach spring tension and reinstall access panel.
Test door movement for smooth, balanced operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore smooth, controlled dishwasher door operation — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO W11688994 Washer Water Inlet Valve (Hot)
The XPARTCO W11688994 is an aftermarket replacement hot water inlet valve compatible with select Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Inglis, and Kenmore front-load washers. The hot water inlet valve is mounted at the back of the washer where the hot water supply hose connects. When the washer's control board calls for hot water during a wash cycle, the valve's internal solenoid opens, letting hot water flow into the tub or detergent dispenser. The valve closes the instant the control board cuts power, stopping flow precisely as the correct fill level is reached.
When this valve fails, the washer may not fill with hot water at all, fill very slowly with hot water, fail to deliver hot or warm wash temperatures (even when selected), continuously drip water into the tub even when off, or display fill-related error codes. Construction is red and white plastic with a metal solenoid coil, ~3"H x 4"W x 3"L, with 1/2" NPT threaded inlet for standard washer supply hose. It directly replaces W11688994, W11036928, W11316255, W11486360, and AP7218602. Often replaced as a pair with the cold water inlet valve (W11688995, sold separately). Installs in 10–15 minutes with basic hand tools.
Quick Answer
The XPARTCO W11688994 Washer Water Inlet Valve (Hot) fixes Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, and Kenmore front-load washers that aren't filling with hot water, fill slowly with hot water, can't reach hot or warm wash temperatures, or have continuous water dripping into the tub when off. Red/white plastic with metal coil, 1/2" NPT thread, ~3"H x 4"W x 3"L. Replaces W11036928, W11316255, W11486360, AP7218602. Often paired with the cold water valve (W11688995, sold separately).
Common Problems This Part Fixes
Washer not filling with hot water — valve solenoid not opening when commanded
Washer filling slowly with hot water — valve partially clogged or weak solenoid
No hot or warm water in selected wash temperatures — only cold water flowing in
Hot wash cycle running cool — hot valve not delivering normal flow
Water continuously dripping into the tub when the washer is off — hot valve stuck open or not fully closing
Water leaks at the hot valve body — internal seal failure
Wash cycles taking much longer than normal due to slow hot fill
Fill-related error codes when hot fill is required by the selected cycle
Replaces Part Numbers
This hot water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11688994, W11316255, W11036928, W11486360, 4983330, AP7218602, AWP46795, EAP17216729, FIX17216729, OEM21655815, PD00085626, PS17216729.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This hot water inlet valve is compatible with select front-load washers from the following brands:
Whirlpool front-load washers — 7MWFC9822HC1, 8TWFC6810LW0, WFC682CLW0, WFC6810LW0, WFC9820HC0, WFC9820HW0 series
Whirlpool front-load washers — WFW560CHW0, WFW560CHW1, WFW560CHW2, WFW560CHW3, WFW560CHW4 series
Whirlpool front-load washers — WFW5605MC0, WFW5605MW0 series
Whirlpool front-load washers — WFW5620HW0, WFW5620HW1, WFW5620HW2, WFW5620HW3 series
Whirlpool front-load washers — WFW6620HC0, WFW6620HC1, WFW6620HC2, WFW6620HW0, WFW6620HW1 series
Whirlpool front-load washers — WFW8620HC0, WFW8620HC1, WFW8620HC2, WFW8620HC3, WFW8620HC4, WFW8620HW0, WFW8620HW1, WFW8620HW2, WFW8620HW3, WFW8620HW4 series
Whirlpool front-load washers — WFW862CHC0, WFW862CHC1, WFW862CHC2, WFW862CHC3 series
Whirlpool front-load washers — WFW9620HBK1, WFW9620HBK2, WFW9620HBK3, WFW9620HC0, WFW9620HC1, WFW9620HC3, WFW9620HW0, WFW9620HW1, WFW9620HW2, WFW9620HW3 series
Maytag front-load washers — MHW5630HC0-HC3, MHW5630HW0-HW3, MHW6630HC0-HC3, MHW6630HW0-HW3, MHW8630HC0-HC4, MHW8630HW0-HW4 series
Amana front-load washers — NFW5800HW0, NFW5800HW1, NFW5800HW2, NFW5800HW3, NFW5800HW4 and related models
Inglis front-load washers — IFW5900HW0, IFW5900HW1, IFW5900HW2, IFW5900HW3, IFW5900HW4 and related models
KitchenAid, Jenn-Air, Magic Chef, Admiral, Norge, Roper front-load washers — select Whirlpool-built models
Kenmore / Sears front-load washers — select Whirlpool-built models
Note: This is the hot water inlet valve (typically red). The matching cold water inlet valve is part number W11688995 (typically blue). When you replace one valve, it's a good practice to replace the other at the same time since they're the same age, both are accessible during the same repair, and the second valve will likely fail in the near term. Always verify your model number before ordering.
Key Features
Aftermarket replacement built to OEM-equivalent quality standards
Controls the flow of hot water into the washer during fill cycles
Solenoid-actuated — opens precisely when the control board calls for hot water and closes the moment the call is dropped
1/2" NPT threaded inlet for standard washer supply hose connection
Dimensions: approximately 3" H x 4" W x 3" L
Red and white plastic body with metal solenoid coil — heat-resistant construction designed for hot water cycle pressure and temperature
Replaces W11036928, W11316255, W11486360, AP7218602, and PD00085626
Compatible with Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Inglis, and Kenmore front-load washers
Often replaced together with the cold water inlet valve (W11688995, sold separately) as a paired repair
Quick DIY repair — installs in 10–15 minutes with basic hand tools
Product Specifications
Part Number
XPW11688994
Part Type
Washer Water Inlet Valve (Hot)
Condition
Aftermarket Replacement
Application
Front-Load Washers (Whirlpool platform)
Water Type
Hot (paired cold valve is W11688995)
Inlet Thread
1/2" NPT
Dimensions
Approximately 3" H x 4" W x 3" L
Color
Red / White
Material
Plastic / Metal (heat-resistant)
Often Paired With
Cold Water Inlet Valve (W11688995, sold separately)
Compatible Brands
Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Inglis, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Supply Before Starting — Wear Work Gloves Disconnect power and shut off both the hot and cold water supplies at the wall before beginning. Wear work gloves to protect your hands. Have towels ready — residual water remains in the supply hoses and will spill when disconnected. Important: if the washer has just been running a hot cycle, allow the hot supply hose and valve to cool before handling — hot water can scald. Pull the washer out from the wall to access the back. Remove the three 1/4" screws securing the rear edge of the top cover, push the top cover slightly back, and lift it off. Locate the inlet valves at the back of the washer — the hot valve is typically red. Disconnect the hot water supply hose from the valve (water will drip — towels). Photograph the wire connections before disconnecting. Unplug the small electrical connector from the valve solenoid. Remove the single 3/16" mounting screw (or similar hardware, model-dependent) holding the valve in place, and disconnect any internal water hoses from the valve outlet (channel-lock pliers may help with hose clamps). Install the new W11688994 valve in the same position with the same orientation, reconnect the internal water hoses and electrical connector, and secure the mounting screw. Reconnect the hot supply hose at the wall, restore water and power, and run a test cycle on a hot or warm setting to confirm normal hot water fill with no leaks. Tip: while the top cover is off, this is the ideal time to also replace the cold water valve (W11688995) — they share the same access and lifespan. Tools needed: 1/4" nut driver, 3/16" nut driver, adjustable wrench or pliers, work gloves.
Frequently Asked Questions
My washer isn't filling with hot water — is the hot valve the problem?
Likely, yes — that's the most common symptom of a failed hot water inlet valve. Before replacing, do a few quick checks: 1) confirm the hot water supply at the wall is turned on and your home actually has hot water at that connection (test the faucet nearby); 2) check the supply hose for kinks or pinches; 3) inspect the inlet screen on the back of the valve for sediment buildup — a clogged screen can mimic a failed valve. If the supply is good and the screen is clean, but the washer still won't get hot water, the W11688994 valve solenoid has likely failed and replacing it will resolve the issue.
My washer fills but my hot wash isn't actually hot — could it still be this valve?
Yes — when the hot inlet valve is partially failed (opening but not fully, or opening only briefly), the washer may complete its fill cycle by drawing extra cold water to compensate, but the resulting mix is much cooler than the selected wash temperature should be. If you've confirmed your home's hot water is hot, the supply hose is good, and you're still ending up with lukewarm "hot" washes, the hot valve is a likely cause. Replacing it restores proper hot water delivery and accurate wash temperatures.
Should I replace the cold water valve at the same time?
Yes, it's strongly recommended. The hot and cold inlet valves are essentially identical components installed side by side at the back of the washer — they're the same age, are exposed to the same wash cycle stress, and have the same expected service life. When one fails, the other is typically not far behind. Since the top cover is already off and both valves are accessible during the same repair, replacing both saves you a second teardown later. The matching cold water valve is part number W11688995 (blue, sold separately) and is also available as a paired kit.
My washer is dripping water into the tub even when it's off — could the hot valve be the cause?
Yes, that's a classic sign of a failed inlet valve. When the solenoid wears out or debris keeps the valve from sealing fully closed, water leaks past it at low rates and drips into the tub even with the washer powered off — especially noticeable as a slow puddle forming over a day or two. Since both the hot and cold valves feed into the tub, you'll want to identify which one is leaking: shut off the cold water supply at the wall and check if dripping continues. If it stops, the cold valve is at fault; if it continues, this hot valve is the cause. Replacing the W11688994 will resolve a leaking hot valve.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, electrical specifications, 1/2" NPT thread, and solenoid function of the original W11688994 hot water inlet valve used in compatible Whirlpool, Maytag, Amana, KitchenAid, and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPHVP-16 Microwave Convection Oven High Voltage Diode – Replaces TurboChef 100481 – Compatible with Commercial & Residential Microwave Models
Product Description
Restore proper heating performance in your commercial or residential microwave with the XPHVP-16 Microwave Convection Oven High Voltage Diode. This high-quality aftermarket diode replaces TurboChef 100481 and is engineered to handle the elevated heat and voltage levels found in high-speed ovens and convection microwave systems. A failing HV diode can cause the microwave to run without heating, blow fuses, or produce loud humming sounds. Installing this XPHVP-16 diode restores safe high-voltage operation and consistent heating.
Replaces Part Numbers
XPHVP-16, TurboChef 100481, HV07-16, HVP-16, TBC100481, CKTE100481 equivalent high-voltage microwave diodes.
Compatibility
This aftermarket high-voltage diode replaces TurboChef 100481 and fits many commercial and household microwave or convection microwave ovens, including:
Fits specific TurboChef models including Bullet, ECO ST, Encore, Encore 2, G5, I3, NGC, NGC2, NGO, Sota/I1, TORNADO 2, i5.
Typical compatible equipment includes:TurboChef High-Speed Ovens, and other convection microwave systems requiring a 12–16kV diode.
Always verify electrical specifications before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to replace TurboChef 100481 and match OEM electrical performance
🔥 High-Heat & High-Voltage Rated – Built for demanding commercial microwave environments
💰 Cost-Effective Commercial Repair – A reliable alternative to costly OEM replacement parts
🛡️ Solves Common Issues – Fixes no-heat conditions, humming, blown fuses, and weak heating output
📐 Product Specification
Part Number: XPHVP-16
Replaces: TurboChef 100481
Component Type: High Voltage Rectifier Diode
Voltage Rating: 12–16 kV peak
Current Rating: Max. Forward Current 750MA
Polarity: Standard microwave HV polarity (stripe = cathode)
Material: Heat-resistant high-voltage diode with insulated leads
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Screwdriver, insulated gloves, needle-nose pliers
⚠️ Safety First: Microwave and commercial oven repairs involve dangerously high voltage even when unplugged. Only qualified technicians should replace HV components.
Steps (for trained professionals):
Disconnect power and properly discharge the HV capacitor.
Remove the microwave or oven’s service cover.
Locate the HV diode near the capacitor and transformer.
Remove the old diode and install the new XPHVP-16, ensuring correct polarity.
Reassemble unit and test heating performance.
⏱️ Time Required: 20–30 minutes (professional repair recommended)
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance & Commercial Equipment Parts Supplier
🔄 30-Day Return Policy
Restore powerful, consistent heating — Add to Cart Now for a reliable and cost-effective replacement!
XPARTCO W10711017 Range Vent Hood Thermal Fuse
The replacement W10711017 Range Vent Hood Thermal Fuse is designed for Jenn-Air range hood models. This replacement fuse protects the range hood’s electrical system (e.g., fan or motor circuits) from overheating or power surges. Ideal for restoring functionality to Jenn-Air range hoods experiencing issues like no power, fan failure, or intermittent operation. This fuse is located on hood control board.
Note: Disconnect power before installation. Verify voltage and amperage compatibility with your appliance model.
Replaces part numbers: W10711017, AP5949884, PS10057091.
Compatibility (W10711017):
Compatible with select Jenn-Air range hood models, including but not limited to:
Jenn-Air: JXI8736DS00, JXI8742DS00, JXI8936DS00, JXW8736DS00, JXW8936DS00.
Verify your model number or contact our support team for assistance.
Key Features (W10711017):
✅ Brand Compatibility: Fits select Jenn-Air range hood models.
🔥 Specifications: Replacement thermal fuse, specifications vary by model (typically 125V–250V, verify amperage), heat-resistant, single-use.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes.
🛡️ Reliable Fixes: Addresses range hood issues like no power, fan failure, or intermittent operation.
Installation Notes (W10711017):
Safety First: Disconnect the appliance from the power source before installation.
Location: Typically found on the control board; consult your model’s manual for exact placement.
Tools: Use a screwdriver to access the fuse compartment and pliers to remove and install the fuse.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or range hood running today!
Add to cart now for a budget-friendly fix!
V-156-1C25 Micro Limit Switch
Contact Type: SPDT 1NO 1NC
Actuator Type: 1.1" Long Hinge Roller Lever
Rating: 15A 125 250VAC
Lever Length: 1.1" Long Hinge Roller Lever
Rating: 15A,1/2HP, 125 250VAC; 0.6A,125VDC; 0.3A, 250VDC
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
🔌 XPG497 Microwave Door Switch (Normally Open)
Solve door-related start issues in your microwave with this XPG497normally open (NO) door switch. This high-quality replacement restores safe and proper operation when the microwave door is closed — ensuring that your unit only starts when the door is fully shut.
Compatible with many popular brands, including LG, Samsung, GE, Whirlpool, Frigidaire, Panasonic, Kenmore, and more.
✅ Product Features:
Replacement for common door switch part numbers
Normally Open (NO) contact switch – closes circuit when door is shut
Rated: 16A / 250V, suitable for most standard microwave ovens
Features 0.187" (4.8mm) terminals for easy installation
Max. Current: 16A, 125/250VAC
Approvals: CCC CE UL VDE
Mounting Size: 22.2*10.3mm
Size: 27.8*10.3*15.9mm
Compact and durable design for long-lasting performance
6 Pack
🔁 Common Replacements For:
3B73362F, 3B73362E, 6600W1K003D, 6600W1K004C, 6600W1K004F, AH3522738, EA3522738, AP4437957, PS3522738, WB24X816, WB24X0816, AP2024324, QSWMA085WRE0, QSWMA168WRZZ, WB24X10180, AH2370055, EA2370055, AP4484237, PS2370055, 00606693, 00415824, 1386418, 35-00-780, 415824, 606693, AH3477005, EA3477005, PS3477005, AP4070531, PS8726630, 00633795, 00415825, 35-00-781, 415825, 4162223, AP5952985, PS10060855, WB23X10019, 1810578, AH3486591, EA3486591, AP4980343, PS3486591, WB24X10204, WB24X10148, WB24X28940, 251201600929, 3025958, AP5790848, PS8754454, 5304408938, 5304430284, 639405, AH471434, EA471434, AP2151217, PS471434, WB24X10047, WB24X10029, WB24X0815, WB24X10072, WB24X10113, WB24X815, AH237015, EA237015, AP2622452, PS237015, 5304408938, 5304430284, 639405, AH471434, EA471434, AP2151217, PS471434, 5304423463, 892734, AH472733, EA472733, AP2151744, PS472733, 5304493153, 5304440026, 3018427, 5303319558, 5304467694, 75304440026, 75304467694, AP5804011, PS8769124, WB24X10139 1086028, AH953555, EA953555, PS953555, AP3792702, WB24X10140 AH953556, EA953556, AP3792654, PS953556, WB24X829, WB24X10038, WB24X368, WB24X384, WB24X414, WB24X426, WB24X439, WB24X441, WB24X445, WB24X796, WB24X5228, WB24X796, AP2024337, AH237421, EA237421, PS237421, WP56001036, 56001036, 0053464, R0654097, AP6009674, PS11742843, 3405-001034, 3405-000178, 111698, 2028597, AP4044834, PS4131192, WB24X823, WB24X0820, WB24X0823, WB24X820, AH237415, EA237415, AP2024331, PS237415, 5304509460, 5304520020, 5304464099, 4583656, AP6230615, PS12071303, WB24X10146, WB24X28941, AH1019163, EA1019163, MW-7100-33, AP3866977, PS1019163, 5304493153, 5304440026, 3018427, 5303319558, 5304467694, 75304440026, 75304467694, AP5804011, PS8769124, D3V-16G-3C25, SZM-V16-FA63.
Replaces various OEM switches with normally open function
📌 Important: Please confirm your original switch is a "normally open" (NO) type before ordering. This part will not replace "normally closed" or "common" type switches.
⚠️ Fixes These Issues:
Microwave doesn’t start when door is closed
Intermittent power loss during cooking
Error code or unresponsive control panel
Buzzing sound or clicks without activation
🧰 Compatible Brands (select models):
✔️ LG✔️ GE✔️ Whirlpool✔️ Frigidaire✔️ Kenmore✔️ Samsung✔️ Panasonic✔️ Sharp(Model-specific compatibility varies — contact us with your model number if unsure.)
🚚 Why Buy from Parts-O-Matic?
✅ Reliable aftermarket quality
✅ Fast and Free U.S. shipping
✅ Bulk-friendly pricing for repair techs
✅ Customer support you can count on
🛒 Restore safe door functionality in your microwave — order the XPG497 Normally Open Door Switch today from Parts-O-Matic.com and get it delivered fast, for free.
(5 Pack) EXPHV11 Microwave High Voltage Diode (Rectifier)
Replaces:GE, LG, AMANA, ELECTROLUX, GE, KENMORE, MAYTAG, WHIRLPOOL, Frigidaire T3512, 3512, T4512, H, CL01-12, HVM12, 512 H, 12Kv, 350mA.
Replaces Part Numbers: 11QBP0236, AP5633254, PS4085133, AP3192533, PS239740 EA239740, WB27X10597, 13091701, AP6005641 PS11738693, WP13091701, 417726, 00188507 AP3382376 PS8712310, 00417726, PS11745270, AP6012063, 8205489, AP4357534, PS2339491, EA2339491, 5304467670, AP4564925, 3518400400, PS11745270, AP6012063, WP8205489, PS3654932, AP5631218, W10245187, W10492278.
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
Microwave High Voltage Diode – Universal Replacement
Restore your microwave’s heating function with this high-quality high voltage diode. Built to handle up to 12,000V / 500mA, it’s a reliable replacement for worn or damaged diodes in many major brands.
Features:
Direct replacement for most microwave models
Durable and rated for high-voltage performance
Fixes common issues like no heat or humming
Fits brands: GE, Whirlpool, LG, Samsung, Panasonic, Frigidaire, and more.
⚠️ Installation should be done with power disconnected. Not sure if it fits? Contact us to confirm compatibility.
XPARTCO EXPHV10 Microwave High Voltage Diode
The XPARTCO EXPHV10 is a universal aftermarket replacement high voltage diode (rectifier) compatible with most major microwave brands including GE, Whirlpool, Maytag, Samsung, LG, Frigidaire, Panasonic, Sharp, KitchenAid, and Kenmore. The high voltage diode is a critical component in the microwave's high-voltage circuit, working alongside the high-voltage capacitor and transformer to convert alternating current (AC) to direct current (DC) — providing the high-voltage DC power required by the magnetron to generate microwave energy and heat food.
When the diode fails — due to electrical surges, overheating, or normal wear — the magnetron cannot receive the correct power supply, resulting in a microwave that runs but does not heat. A failed diode may also cause the high-voltage fuse to blow repeatedly. Rated at 12,000V DC (12 kV) with a 500mA current capacity, the EXPHV10 is a universal cross-brand replacement that meets or exceeds OEM specifications across hundreds of microwave models.
⚡ HIGH VOLTAGE SAFETY WARNING — READ BEFORE SERVICING Microwaves contain a high-voltage capacitor that can store a lethal electrical charge of up to 2,100 volts even when the microwave is unplugged. Do NOT touch any internal components without first discharging the capacitor. If you are not experienced with high-voltage appliance repair, do not attempt this repair yourself — contact a qualified appliance technician. Always unplug the microwave before opening the cabinet and discharge the capacitor using a properly insulated discharge tool before handling any internal parts.
Quick Answer
The XPARTCO EXPHV10 Microwave High Voltage Diode fixes microwaves that run but produce no heat, have a repeatedly blown fuse, or have a humming sound with no heating. It converts AC to DC power for the magnetron and is rated 12,000V DC / 500mA. Universal fit — compatible with most GE, Whirlpool, Maytag, Samsung, LG, Frigidaire, Panasonic, Sharp, KitchenAid, and Kenmore microwaves.
Common Problems This Part Fixes
Microwave runs (turntable spins, light works) but does not heat food
High-voltage fuse blows repeatedly after replacement
Loud humming or buzzing sound with no heating
Microwave takes much longer than normal to heat food
Microwave heats unevenly or inconsistently
Replaces Part Numbers
This diode directly replaces the following OEM and cross-reference part numbers:
HV10, EXPHV10, 2CL70, 2CL77, W11256462, W10886077, AWP43735, PD00047836, AP6784287, PS12584264, WB27X1160, AGE22195, PD00026293, AP2026385, PS239843, DE91-70063D, DE91-70063A, ASM94577, PD00033057, AP4236698, PS4235633, 5304417430, AP2151558, PS472334, 6021W3B001U, AP4439834, PS3528798, 6851W1A002E, ALG51731, PD00006373, AP5203812, PS3529603, 5304456178, AP3960683, PS1532581, 3518400800, AP7110292, 5304509479, 5304472472, AFR17769, PD00040522, AP4433625, PS12071314, WPR9800486, AWP128355, PD00004942, AP6014695, PS11747959, 11QBP0237, AP5633255, PS4085135, WB27X10744, AP3792899, PS953886, WB27X35382, WB27X10930, WB18X10449, WB27X10892, WB27X10965, WB27X11035, AP6992536, PS16219547, WB27X10562, AGE1037090, AP3187536, PS239704, WP13091701, AWP634588, PD00035043, AP6005641 PS11738693, WB27X10687, AGE1019656, PD00032466, AP3207509, PS953843, WB27X10107, AP2026017, PS239224, WB27X10037, AGE22509 PD00031660, AP2025948, PS239148, WPDE91-70063D, AWP547793, PD00034036, AP6014620, PS11747873, 6021W3B001V, 6021W3B001R, AP5632506 EAP3528799, ALG51931, PD00008859, AP4438526, PS3528799, WB27X21012, AGE360033, PD00037340, AP5791119, PS8754690, 00625682, 10001605, ABS11495, PD00047510, AP5804800, PS8770335, CL04-12.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This universal high voltage diode is compatible with most microwave ovens from the following brands:
GE and Hotpoint microwaves
Whirlpool microwaves
Maytag microwaves
KitchenAid microwaves
Samsung microwaves
LG microwaves
Frigidaire and Electrolux microwaves
Panasonic microwaves
Sharp microwaves
Kenmore / Sears microwaves
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Converts AC to DC power in the microwave's high-voltage circuit — enabling the magnetron to generate microwave energy and heat food
Rated 12,000V DC (12 kV) / 500mA — meets or exceeds OEM electrical specifications
Universal fit — compatible with most major microwave brands across hundreds of models
Aftermarket replacement built to OEM-equivalent quality standards
Pre-terminated leads — direct drop-in replacement, no modification required
Compact insulated design for safe and easy installation
Budget-friendly fix for one of the most common microwave no-heat failures
Product Specifications
Part Number
EXPHV10
Part Type
High Voltage Diode (Rectifier)
Condition
Aftermarket Replacement
Application
Microwave Oven High Voltage Circuit
Voltage Rating
12,000V DC (12 kV)
Current Rating
500 mA
Material
Insulated Epoxy Body
Terminals
Pre-terminated leads
Fit Type
Universal — fits most major microwave brands
Compatible Brands
GE, Whirlpool, Maytag, KitchenAid, Samsung, LG, Frigidaire, Panasonic, Sharp, Kenmore
Installation Notes
⚡ DANGER — HIGH VOLTAGE — DISCHARGE CAPACITOR BEFORE SERVICING Microwaves store a lethal charge in the high-voltage capacitor even when unplugged. You must discharge the capacitor before touching any internal parts. Use a properly insulated discharge tool or resistor — never a screwdriver or bare wire. Once the capacitor is safely discharged: unplug the microwave and remove the outer cover. Locate the high voltage diode — it is connected between the high-voltage capacitor and the chassis ground. Disconnect both leads, note the orientation/polarity, remove the old diode, and install the new EXPHV10 in the same position and orientation. Reconnect leads, reassemble the cover, and test heating operation. Time required: approximately 20–25 minutes. If you are unsure about any step, contact a qualified appliance technician.
Frequently Asked Questions
Will the EXPHV10 fit my microwave?
The EXPHV10 is a universal replacement diode compatible with most GE, Whirlpool, Maytag, KitchenAid, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwaves. Use the model search above to verify, or contact our support team before ordering.
What does the high voltage diode do?
The high voltage diode works with the capacitor and transformer to convert AC power to high-voltage DC power — typically around 4,000 to 5,000 volts. This DC voltage powers the magnetron, which generates the microwave energy that heats food. A failed diode prevents the magnetron from receiving proper power, resulting in a microwave that runs but does not heat.
How do I test if my microwave diode is bad?
After safely discharging the capacitor, use a multimeter set to the diode test mode. A good diode will show continuity in one direction and no continuity in the other (one-way electrical flow). A bad diode will show either no continuity in both directions (open) or continuity in both directions (shorted). A shorted diode will also cause the fuse to blow repeatedly.
My microwave fuse keeps blowing — is the diode the problem?
A shorted high voltage diode is one of the most common causes of a repeatedly blown microwave fuse. When the diode shorts, it draws excess current which blows the fuse. If you replace only the fuse and it blows again immediately, test the diode and capacitor as well before replacing the fuse again.
Is this an OEM or aftermarket part?
This is an aftermarket universal replacement part built to OEM-equivalent electrical specifications. It is not a genuine OEM part from any specific brand, but is rated at 12,000V DC / 500mA — meeting or exceeding the requirements of most microwave high-voltage circuits.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO S97018253 Range Vent Hood Light Fuse
The replacement S97018253 Range Vent Hood Light Fuse is designed for select Broan range hood models. This replacement fuse protects the range hood’s light circuit from power surges or faults. Ideal for restoring functionality to select Broan range hoods experiencing light-related issues, such as non-functioning lights or intermittent power.
Note: Disconnect power before installation. Handle glass fuse carefully.
Replaces part numbers: S97018253, 1930589, 97018253, AP5616207, PS10280886.
Compatibility (S97018253):
Compatible with select Broan range hood models, including but not limited to:
Broan: QP2, QP3, QP4 series (e.g., QP230BC, QP230BL, QP230SS, QP236BC, QP236BL, QP236SS, QP236WW, QP242BC, QP242BL, QP242SS, QP242WW, QP330BL, QP330SS, QP330WW, QP336BL, QP336SS, QP336WW, QP342BL, QP342SS, QP342WW, QP430SS, QP436SS, QP442SS)
Verify your model number or contact our support team for assistance.
Key Features (S97018253):
✅ Brand Compatibility: Fits select Broan range hood models.
🔥 Specifications: Replacement fuse, 8A, 120V, glass fuse (5x20mm), heat-resistant.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes.
🛡️ Reliable Fixes: Addresses range hood light issues like non-functioning lights or intermittent power.
Installation Notes (S97018253):
Safety First: Disconnect the appliance from the power source before installation.
Location: Typically found in the upper left corner of the range hood control board; remove filters and bottom pan to access.
Tools: Use a screwdriver to access the control board and pliers to remove and install the fuse.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or range hood running today!
Add to cart now for a budget-friendly fix!
EXPHV11 Microwave High Voltage Diode (Rectifier)
Replaces:GE, LG, AMANA, ELECTROLUX, GE, KENMORE, MAYTAG, WHIRLPOOL, Frigidaire T3512, 3512, T4512, H, CL01-12, HVM12, 512 H, 12Kv, 350mA.
Replaces Part Numbers: 11QBP0236, AP5633254, PS4085133, AP3192533, PS239740 EA239740, WB27X10597, 13091701, AP6005641 PS11738693, WP13091701, 417726, 00188507 AP3382376 PS8712310, 00417726, PS11745270, AP6012063, 8205489, AP4357534, PS2339491, EA2339491, 5304467670, AP4564925, 3518400400, PS11745270, AP6012063, WP8205489, PS3654932, AP5631218, W10245187, W10492278.
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
Microwave High Voltage Diode – Universal Replacement
Restore your microwave’s heating function with this high-quality high voltage diode. Built to handle up to 12,000V / 350mA, it’s a reliable replacement for worn or damaged diodes in many major brands.
Features:
Direct replacement for most microwave models
Durable and rated for high-voltage performance
Fixes common issues like no heat or humming
Fits brands: GE, Whirlpool, LG, Samsung, Panasonic, Frigidaire, and more.
⚠️ Installation should be done with power disconnected. Not sure if it fits? Contact us to confirm compatibility.
