WP4449751 Genuine OEM Whirlpool Oven High Limit Thermostat
The WP4449751 is a Genuine OEM Whirlpool replacement oven high limit thermostat compatible with a wide range of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens, wall ovens, microwave-oven combinations, and ranges. The high limit thermostat is a critical safety device mounted near the oven cavity — it continuously monitors the oven's temperature and cuts off electrical power to the heating element if the oven exceeds its safe operating temperature. When the oven temperature drops back to normal, the thermostat closes and allows normal operation to resume. This backup safety layer protects against fires, damage to the oven, and unsafe cooking conditions when the main temperature control fails.
Rated to trip at approximately 335°F (170°C). Common causes for the high limit thermostat to trip include a faulty control board, cooling fan failure, blocked ventilation, poor door sealing, disrupted air circulation, or an abnormal self-cleaning cycle. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the WP4449751 directly replaces 4449751, 1550872, AP6009390, AH2375382, EA2375382, PS2375382, PS11742549, EAP11742549, and AH11742549. Installs in 30–45 minutes with basic hand tools by experienced DIYers. This is a safety component in a 240V oven circuit — proceed only if you're comfortable with high-voltage electrical work, or call a qualified appliance technician.
Quick Answer
The WP4449751 Genuine OEM Whirlpool Oven High Limit Thermostat fixes Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, and Kenmore ovens with symptoms including oven not heating, oven overheating, uneven heating, oven failing to start, and self-clean door won't unlock after cycle. 335°F (170°C) trip temperature — cuts off power to heating element on overheat, then resets when temperature returns to normal. Genuine OEM. Replaces 4449751, 1550872, AP6009390, AH2375382, EA2375382, PS2375382, PS11742549, EAP11742549, AH11742549. Compatible with WOS/WOD wall ovens, KOSE/KODE/KOCE series, JJW/JMW/JDRP/JDR series, and many more.
Common Problems This Part Fixes
Oven not heating at all — high limit thermostat tripped open
Oven overheating — thermostat failing to trip when needed (rare failure mode)
Inconsistent oven temperatures leading to undercooked or overcooked food
Oven fails to start when powered on
Oven door won't unlock after a self-cleaning cycle completes
Uneven heating — hot spots or cold spots inside the oven cavity
Oven cuts off heat mid-cycle without reaching set temperature
F-code or thermostat-related error displayed on the control panel
Multimeter continuity test on the thermostat shows an open circuit at room temperature
Visible damage or discoloration on the thermostat housing from a prior overheat event
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This oven high limit thermostat directly replaces the following OEM and cross-reference part numbers:
WP4449751, 4449751, 1550872, AP6009390, AWP47600, EAP2375382, PD00025977, PS11742549
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This high limit thermostat is compatible with select ovens, wall ovens, ranges, and microwave-oven combinations from the following brands:
Whirlpool wall ovens — WOS series (WOS31ES0JS, WOS51EC0AS, WOS51EC0HS, WOS51EC7HW02, WOS51EC7HW21, WOS72EC0HS/HV, WOS72EC7HS/HV, WOS92EC0/EC7 all revisions, WOS97ES0ES series)
Whirlpool double wall ovens — WOD series (WOD51EC0AW03, WOD51EC7HS, WOD93EC7AS)
Whirlpool combination wall ovens — WOC54EC0/EC7 series
KitchenAid wall ovens — KOSE, KODE, and KOCE series (KOSE500ESS, KODE500ESS, KOCE500ESS, KOCE500EBL00/EBL01/EBL02/EBL04/EBL05)
Jenn-Air wall ovens — JJW, JMW, JDRP, and JDR series (JJW2427DB/DS 00/01, JJW2430DS, JJW3430DS, JMW2430DS, JDRP430HL/HM 00/01, JDRP430WP00, JDRP436HL/HM/WP series, JDRP536HL/HM/WP series)
Maytag wall ovens and ranges (select models)
Amana wall ovens (select models — AWO6313SFB00/02, AWO6313SFS00/02, AWO6313SFW00/02)
KitchenAid ranges — KDRS407 series (KDRS407VBK01, KDRS407VBU01, KDRS407VSS00)
Whirlpool ranges — IBD350DS00, IBS300DS00, IBS350DS00 series
Magic Chef, Admiral, Norge, Roper wall ovens (select Whirlpool-built models)
Kenmore / Sears wall ovens (select Whirlpool-built models)
Suitable for single or double electric wall ovens and microwave-oven combination units
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
High limit thermostat (safety switch) — cuts off power to the oven's heating element when temperature exceeds 335°F (170°C) to prevent overheating damage or fire
Auto-reset design — closes and restores normal operation when the oven temperature returns to safe range
Precision-calibrated to Whirlpool factory specifications for accurate trip temperature and reliable safety response
One-year Whirlpool warranty on Genuine OEM parts
Replaces 4449751, 1550872, AP6009390, AH2375382, EA2375382, PS2375382, PS11742549, EAP11742549, and AH11742549
Compatible with Whirlpool WOS/WOD/WOC series, KitchenAid KOSE/KODE/KOCE series, Jenn-Air JJW/JMW/JDRP/JDR series, plus Maytag, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens
Fits single wall ovens, double wall ovens, ranges, and microwave-oven combination units
Resolves "oven won't heat," "overheating," "uneven heating," "self-clean door stuck locked," and "won't start" symptoms when caused by a failed high limit thermostat
For experienced DIYers or qualified appliance technicians — this is a safety component in a 240V oven circuit
Installation typically takes 30–45 minutes with basic hand tools
Product Specifications
Part Number
WP4449751
Part Type
Oven High Limit Thermostat (Safety Switch)
Condition
Genuine OEM
Application
Wall Ovens, Ranges, Microwave-Oven Combinations (Whirlpool platform)
Trip Temperature
335°F (170°C)
Type
Auto-Reset (closes when temperature returns to safe range)
Warranty
One-Year Whirlpool Warranty (Genuine OEM)
Compatible Brands
Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Turn Off Power at Breaker Before Starting — This Is a 240V Oven Circuit — Wear Work Gloves Disconnect power at the household breaker before beginning — this is a 240V circuit and there is a serious risk of electrical shock if power is not fully disconnected. Verify power is off with a voltage tester before touching any wiring. Wear work gloves and safety glasses. Allow the oven to cool completely before beginning (several hours after any recent cooking). The high limit thermostat is typically mounted on the rear or side of the oven cavity, accessed by removing the back panel of the appliance (for freestanding ranges) or the front trim/service panel (for wall ovens). The exact location varies by model — consult your appliance's service diagram before starting. Photograph all wire connections and mounting details before disconnecting anything. Disconnect the wire terminals from the old thermostat (typically two spade-terminal wires). Remove the mounting screws or clips holding the thermostat to the oven cavity, and lift it out. Install the new WP4449751 in the exact same position and orientation — the thermostat must be in good thermal contact with the oven cavity to function correctly. Secure the mounting hardware and reconnect the wires to their correct terminals. Reinstall the access panels. Restore power at the breaker and test the oven — start with a low-temperature bake cycle to confirm normal heating operation before running a high-temperature or self-clean cycle. Tools needed: Phillips screwdriver, 1/4" nut driver, voltage tester (essential), work gloves, safety glasses.
Frequently Asked Questions
Why did my high limit thermostat trip in the first place?
A high limit thermostat trips because the oven exceeded its safe operating temperature — meaning something upstream in the temperature control chain failed to shut off the heating element when it should have. Common causes are: a failed oven control board (relay stuck closed), a failed cooling fan (allowing the oven cavity or electronics to overheat), blocked or restricted ventilation, poor door sealing (letting the cavity overheat), disrupted air circulation, or an abnormal self-cleaning cycle. Before installing the new thermostat, investigate and address the underlying cause — otherwise the new thermostat will trip again in short order. Also inspect the ventilation, oven door gasket, and cooling fan while you have the appliance open.
What's the difference between a high limit thermostat and the operating thermostat?
These are two different components serving two different roles. The operating thermostat (or the oven control board with its temperature sensor) is the primary component that maintains the oven at your set temperature by cycling the heating element on and off during normal operation — it opens and closes at your selected temperature (e.g., 350°F). The high limit thermostat (WP4449751) is a backup safety device that only trips when the oven temperature far exceeds normal operation (335°F over the cavity's safe threshold), typically because the operating thermostat or control has failed. If the high limit thermostat trips, both need to be checked — the operating thermostat may also need replacement.
Does the high limit thermostat reset itself, or does it need to be replaced after tripping?
The WP4449751 is an auto-reset thermostat — it closes automatically once the oven cools back to a safe temperature, allowing normal operation to resume. If your oven is heating normally again after cooling, the thermostat is likely still functional (the underlying overheating cause needs investigation). However, if the thermostat has failed permanently open — often the result of repeated overheat events or age — it will need replacement. Test with a multimeter set to continuity: a working thermostat shows continuity at room temperature. If it reads open (infinite resistance) when cold, it has failed and needs replacement.
Why does my self-cleaning cycle leave the oven door locked and the oven won't heat?
This is a classic symptom of a high limit thermostat that tripped during the self-clean cycle. Self-cleaning cycles run at extreme temperatures (800–1000°F) and stress every component in the oven — if the ventilation, door gasket, or cooling fan can't keep up, the high limit thermostat will trip open. Once tripped, the oven can't heat OR unlock the self-clean door lock mechanism, leaving the door stuck closed. Once the thermostat cools and closes (or is replaced), the door lock releases and normal operation resumes. If self-clean cycles routinely trip the thermostat, investigate whether the ventilation, cooling fan, or door gasket are causing the problem.
Can I do this repair myself, or should I hire a technician?
Replacing an oven high limit thermostat is a manageable DIY repair for someone comfortable with mechanical work and electrical connections, but this is a 240V circuit and the thermostat is a safety component — any error can create a serious safety risk. If you have experience with appliance repair, follow the safety precautions carefully (breaker off, voltage tester, correct thermostat orientation), and can confirm the wiring connections are secure, this is a feasible DIY. If you've never worked with 240V appliance circuits before, hiring a qualified appliance technician is the safer option. Also identify and address whatever caused the original overheat event — otherwise the new thermostat will trip again.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same high limit thermostat installed in compatible Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens from the factory — guaranteed fit, materials, and performance. Backed by Whirlpool's one-year warranty on Genuine OEM parts.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
4 Pack - XPARTCO 3977393 Dryer Thermal Cut Off (309°F) – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Protect your dryer from overheating with the XPARTCO 3977393 Dryer Thermal Cut Off (309°F). This high-quality aftermarket replacement is a critical safety component designed to permanently interrupt power to the heating circuit if temperatures exceed 309°F (154°C).
A blown thermal cut off can result in no heat. Replacing it with this reliable XPARTCO component helps restore safe operation and prevent further damage to heating elements or internal components.
XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and performance.
Replaces Part Numbers
3977393, AP3094244, PS334299, EAP334299
Compatibility
This replacement dryer thermal cut off fits select Whirlpool, Maytag, Kenmore (Whirlpool-manufactured), Amana, Estate, and Roper dryers.
Commonly installed on the heater housing assembly.
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM temperature rating and fit
🌡️ 309°F (154°C) Cut-Off Rating – Designed for high-heat safety protection
🛡️ Prevents Overheating Damage – Protects heating element and dryer components
🧩 Direct-Fit Design – Installs easily without modification
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut offs
📐 Product Specification
Part Number: 3977393 - Pack
Component Type: Dryer Thermal Cut Off
Temperature Rating: 309°F (154°C)
Function: One-time over-temperature safety cutoff
Mounting: Screw-mounted
Application: Dryer heater housing assembly
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove rear panel to access heater housing.
Locate and disconnect the old thermal cut off.
Remove mounting screws and install the new XPARTCO 3977393 cut off.
Reconnect wiring and reassemble the dryer.
Restore power and test operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore dryer safety and prevent overheating — Add to Cart Now for a dependable, budget-friendly repair!
131825900 Dryer Genuine OEM Drum Bearing Cup
Product Overview
The 131825900 Dryer Drum Bearing Cup is a Genuine OEM replacement part designed for the rear of the dryer drum. This part provides smooth rotation and stable support, reducing friction and noise during operation. If your dryer is squealing or vibrating excessively, replacing the drum bearing cup can restore quiet, efficient performance.
✅ Genuine OEM Quality✅ Ensures Smooth Drum Rotation✅ Reduces Noise & Wear✅ Durable and Precision-Fit
Parts-O-Matic OFFERS free shipping — no hidden costs, just fast delivery!
🔁 Replaces Part Numbers
131825900, 08015223, 3281008, 5303281008, 774936, 85-951, Q000143951, Q143951, WQ143951, AH418807, DE727, EA418807, AP2107679, PS418807.
Fits a variety of Frigidaire, Gibson, Kelvinator, and Electrolux dryer models. Unsure if it’s the right fit? Send us your model number — we’ll confirm for you.
🔧 Maintain peak performance — get the 131825900 Genuine OEM Drum Bearing Cup from Parts-O-Matic today.
XPARTCO 280187 Washer Drain Pump Assembly
The XPARTCO 280187 is an aftermarket replacement drain pump assembly for Whirlpool-built front-load washers sold under the Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid, and Amana names. The drain pump pushes water out of the tub through the drain hose at the end of the wash and rinse stages. When it clogs, wears out, or seizes, the washer can stop with water still in the drum, throw drain errors, stop before the spin cycle, leak, or make loud humming or grinding noises.
This is a complete drain pump assembly, including the pump motor and housing, so it replaces the whole unit rather than just an internal part. The pump sits at the base of the washer behind the lower front panel, and the swap typically takes 15–30 minutes with common hand tools.
Quick Answer
The XPARTCO 280187 Drain Pump Assembly fixes a Whirlpool-built front-load washer that won't drain, leaves water in the drum, stops before spinning, leaks from the pump, or makes loud noise during draining. Complete pump motor and housing, aftermarket replacement. Classic symptom: the cycle stalls with water still in the tub, or you hear a loud hum or grind while it tries to drain.
Common Problems This Part Fixes
Washer won't drain, or water is left in the drum after the cycle
Drain error codes or the cycle stopping before the spin
Loud humming, grinding, or rattling while the washer drains
Water leaking from the pump or its housing
Pump motor seized or not running
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump assembly replaces the following part numbers:
280187, 1200164, 285998, 8181684, 8182819, 8182821, AH1485610, AP3953640, AWP39453, EA1485610, EAP1485610, PD00002352, PS1485610
These are Whirlpool's current and earlier numbers for this pump. If your old pump or parts diagram shows any of them, this is the matching replacement.
Compatibility
This pump is listed for select front-load washers from:
Whirlpool, including Duet models such as WFW9400VE03, WFW9500TW03, and WFW9600TW02
Kenmore and Kenmore Elite, including 11042822200, 11042926200, 11045962400, and 11045966403
Maytag, including MHWE400WR00 and MHWE400WW0
KitchenAid, including KHWS02RWH0
Amana
Note: The model list above is only a sample, since this pump fits many more models. Confirm fit by matching the number on your old pump or parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This pump is for front-load washers and is not intended for top-load machines.
Key Features
Aftermarket replacement drain pump assembly
Complete unit with pump motor and housing
Restores full draining so cycles finish and the washer can spin
Cross-references to Whirlpool 280187, 285998, 8181684, 8182819, and 8182821
Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and Amana front-load washers
Typical installation 15–30 minutes with common hand tools
Product Specifications
Part Number
XP280187
OEM Part Number
280187
Part Type
Washer Drain Pump Assembly
Condition
Aftermarket Replacement
Included
Pump Motor and Housing
Application
Select Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid & Amana Front-Load Washers
Installation Notes
⚠️ Unplug Power and Expect Water Unplug the washer and turn off the water supply before starting. Remove the lower front panel to reach the pump at the base of the washer, then drain any residual water into a shallow pan or with a wet/dry vacuum, using the drain hose or the small drain cap if your model has one. Disconnect the wiring harness from the pump, then loosen the clamps holding the hoses and pull the hoses off. Remove the pump's mounting screw and take out the old pump. Fit the new pump in the same position, reattach the hoses with the clamps (replace worn clamps if needed), and reconnect the wiring harness. Check that the pump and hose connections are secure, replace the front panel, restore power and water, and run a drain cycle while checking for leaks. Common tools include a nutdriver or Torx driver, screwdrivers, and pliers.
Frequently Asked Questions
My washer won't drain. Is this the part I need?
A failed or clogged drain pump is one of the most common causes. Before replacing it, check the drain hose and the pump filter for a clog, such as a sock or coin. If the filter is clear but the pump hums, grinds, or doesn't run, replacing the pump should fix it.
Does this include the pump motor?
Yes. This is the complete assembly, with the pump motor and housing.
My old pump is marked 285998, 8181684, 8182819, or 8182821. Will this work?
Yes. All of those are earlier Whirlpool numbers for this pump, and 280187 is the current number.
Will this fit my top-load washer?
It is intended for front-load washers. Contact our support team with your model number if you're unsure, and we'll confirm before you order.
Is this an OEM part?
No. This is an XPARTCO aftermarket replacement built to match the Whirlpool 280187. If you prefer a genuine OEM pump, contact us.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
5303281153 Dryer Genuine OEM Rear Drum Bearing
The 5303281153 is a genuine Frigidaire OEM rear drum bearing kit for Frigidaire dryers, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse models. This ball-and-socket style bearing supports the rear of the dryer drum, reducing friction and allowing the drum to rotate smoothly and quietly throughout the drying cycle.
The bearing itself measures approximately 1-15/16"L x 1"W x 1-3/8"H, with mounting holes 1-1/2" apart, center to center. The holes in the metal mounting plate are not pre-threaded — the self-tapping screws included in the kit are what create the threads during installation. Common causes of failure include normal wear and tear, exposure to excessive heat or lint buildup, or physical damage from impact or overloading. Symptoms of a worn or failing rear drum bearing include excessive noise or grinding sounds, difficulty rotating the drum or a drum that won't turn at all, visible wear or damage on the bearing, or increased vibration and shaking during the drying cycle. It directly replaces AP2142648, 1851, 3281153, 5304459240, 85-852, AH459829, DE724, EA459829, PS459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 175428, 175432, 175433, 31581400, 3281019, 3281020, 5303281019, and 5303281020.
Quick Answer
The 5303281153 Dryer Genuine OEM Rear Drum Bearing fixes Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse dryers with excessive noise or grinding, a drum that won't turn or turns with difficulty, or increased vibration. Ball-and-socket style, ~1-15/16"L x 1"W x 1-3/8"H. Replaces AP2142648, 1851, 3281153, 5304459240, 85-852, AH459829, DE724, EA459829, PS459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 175428, 175432, 175433, 31581400, 3281019, 3281020, 5303281019, 5303281020. The mounting plate holes aren't pre-threaded — the included self-tapping screws create the threads as you install them, so take your time getting them started straight.
What's In The Kit
Component
Function
Ball Shaft (131777700)
The shaft the drum rotates on at the rear support point.
Teflon Shaft Bearing (131825900)
Reduces friction between the shaft and its bracket.
Shaft Bearing Bracket (131724301)
Mounts the bearing assembly to the rear bulkhead.
Ball Bearing (5303281019) & Clip (5303281020)
Supports the ball shaft and secures it in place.
Mounting Screws & Washers
Self-tapping screws (3 for the shaft, 2 for the bracket) that thread into the unthreaded metal plate.
High-Temperature Lubricant Tube
Lubricates the bearing assembly for quiet, smooth operation.
Common Problems This Kit Fixes
Excessive noise or grinding sounds from the rear of the dryer
Drum won't turn, or turns with difficulty
Visible wear or damage on the existing bearing
Increased vibration or shaking during the drying cycle
Loud squealing when the dryer runs
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer rear drum bearing kit directly replaces the following OEM and cross-reference part numbers:
5303281153, 1851, 3281153, 5304459240, 85-852, AH459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 3281019, 3281020, 5303281009, 5303286875, 8015113, 8015324, 902088, Q000022224, Q000500537, WQ22224, WQ500537, AFR17081, AP2142648, DE724, EA459829, EAP459829, PD00000097, PS459829
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This rear drum bearing kit is compatible with select Frigidaire dryers, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse dryers built on the Frigidaire platform.
Note: This kit is commonly purchased alongside a drum belt (such as our 137292700 listing), since both are accessed through the same disassembly and often wear on a similar timeline. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — complete rear drum bearing kit in one purchase
Resolves "excessive noise," "won't turn," "worn bearing," and "vibration" symptoms
Ball-and-socket style bearing design
Includes ball shaft, Teflon shaft bearing, bearing bracket, ball bearing and clip, mounting screws and washers, and a high-temperature lubricant tube
Approximately 1-15/16"L x 1"W x 1-3/8"H, mounting holes 1-1/2" apart
Replaces AP2142648, 1851, 3281153, 5304459240, 85-852, AH459829, DE724, EA459829, PS459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 175428, 175432, 175433, 31581400, 3281019, 3281020, 5303281019, and 5303281020
Compatible with Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
5303281153
Part Type
Dryer Rear Drum Bearing Kit
Condition
Genuine OEM
Brand
Frigidaire
Bearing Style
Ball-and-socket
Bearing Dimensions
Approx. 1-15/16"L x 1"W x 1-3/8"H
Mounting Hole Spacing
1-1/2" apart, center to center
Mounting Plate
Not pre-threaded — self-tapping screws included
Includes
Ball shaft, Teflon bearing, bracket, ball bearing + clip, screws, washers, high-temp lubricant
Repair Difficulty
Moderate
Quantity
1 rear drum bearing kit
Compatible Brands
Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, Westinghouse
Installation Notes
⚠️ Unplug Dryer Before Starting — Mounting Plate Holes Are Not Pre-Threaded Disconnect power at the outlet before beginning. Wear work gloves. Remove the back panel and the drum belt to access the drum, then remove the drum itself to reach the rear bearing assembly. While the dryer is open, take the time to clean out any accumulated lint from inside the cabinet and around the motor, since buildup here is common and worth clearing while you have access. Remove the old bearing bracket, ball shaft, and related hardware. Apply the included high-temperature lubricant to the new Teflon shaft bearing and ball bearing as directed. Assemble the new ball shaft, bearing, and bracket, then mount the bracket to the rear bulkhead. The holes in the metal mounting plate are not pre-threaded — use the self-tapping screws included in the kit to thread the plate as you install them. If the included screws feel blunt or don't bite well, threading with your original screws first and then switching to the new screws for final installation can help. Reinstall the drum, making sure it seats correctly on the new bearing. Reattach the drum belt and back panel, and double check that no leftover screws remain before closing everything up. Restore power and run a test cycle to confirm quiet, smooth drum rotation. Tools needed: nut driver, Phillips or square-drive screwdriver, work gloves.
Frequently Asked Questions
My dryer is making a loud grinding or squealing noise. Is this the part I need?
Yes, this is one of the most common symptoms of a worn rear drum bearing. One customer described their dryer as no longer "talking back" after the repair — no more chatter or grinding — confirming this bearing was the source of the noise.
Why does it matter that the mounting plate holes aren't pre-threaded?
Since the plate isn't pre-threaded, the self-tapping screws included in the kit have to cut their own threads as you install them, which takes a bit more care than screwing into an already-threaded hole. One customer found the included screws were blunt and didn't tap easily, and got better results starting the threads with their original, sharper screws before switching to the new screws for the final installation.
Should I clean anything else while I have the dryer open for this repair?
Yes, it's worth it. One customer found their motor "completely embedded with lint and animal hair" during this repair and spent extra time cleaning it out. Since you'll already have the back panel and drum removed, this is a good opportunity to clear out accumulated lint throughout the cabinet.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original bearing style, dimensions, and hardware configuration of the rear drum bearing kit originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
285751 Washer Genuine Agitator Dog Cam Kit
Replaces Part Numbers: 285751, 2837, 3351019, 387092, 3947410, AH334624, EA334624, OEM9283568, AP3094521, PS334624.
Description: This Agitator Kit is an OEM replacement part for specific Whirlpool top-loading washer models. Installed in the center of the wash basket, it aids in the mechanical agitation central to regular laundry cleaning.It contains the plastic cam and four plastic dogs needed to repair a malfunctioning or noisy agitator during the wash cycle.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
12638000004021 Genuine OEM Midea Dryer Drum Roller
The 12638000004021 is a genuine Midea OEM dryer drum support roller, sold under the Frigidaire/Midea manufacturing relationship for Midea-built dryers and select Frigidaire, Insignia, and Kenmore dryers using this same platform. This roller sits underneath the drum, along its rear support track, and does the physical work of holding the drum's weight while letting it turn freely as the belt drives it around. A dryer typically uses more than one of these rollers working together to keep the drum properly supported and centered.
Over time, the wheel and bearing inside the roller wear down from the constant heat and rotation the dryer subjects them to, eventually developing a flat spot, seizing up, or simply wearing thin enough that the drum sits unevenly. A worn roller produces a distinctive symptom: a rumbling, squeaking, or thumping noise that rises and falls with drum rotation, often getting louder as a load tumbles. It directly replaces 5304511415, AP7990985.
Quick Answer
The 12638000004021 Genuine OEM Midea Dryer Drum Roller fixes Midea-built dryers (and select Frigidaire, Insignia, and Kenmore dryers on this platform) with a rumbling, squeaking, or thumping noise that rises and falls with drum rotation. Supports and centers the drum on its rear track. Replaces 5304511415, AP7990985.
Common Problems This Part Fixes
Rumbling or grinding noise that rises and falls with drum rotation
Squeaking or squealing noise from inside the dryer during operation
Thumping or knocking noise, especially with a heavier load
Noise that gets louder over time as the roller wears further
Drum that sits unevenly or wobbles slightly when turned by hand
Visible flat spot, cracking, or wear on the roller wheel
Noise that continues even with an empty drum tumbling
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum roller directly replaces the following OEM and cross-reference part numbers:
12638000004021, AP7990985, PS18170578, 5304511415, 4056012471, AP8049485, PS17993389.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select Midea-built dryers, and also fits select Frigidaire, Insignia, and select Kenmore dryers built on the same Midea platform.
Note: Always verify your full model number before ordering, since Midea and its partner brands use several different roller designs across their dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Midea OEM part — factory-specified wheel and bearing design
Supports the drum along its rear track, allowing smooth rotation as the belt drives it
Resolves "rumbling," "squeaking," and "thumping" noise symptoms caused by roller wear
Direct drop-in replacement for the original roller and axle assembly
Replaces 5304511415, AP7990985.
Compatible with Midea, Frigidaire, Insignia, and select Kenmore dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
12638000004021
Part Type
Dryer Drum Support Roller
Condition
Genuine OEM
Brand
Midea
Location
Rear drum support track
Function
Supports and centers the drum during rotation
Quantity
1 roller
Compatible Brands
Midea, Frigidaire, Insignia, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Access is typically through the rear panel: remove the screws securing the panel, then release the drum belt from the idler pulley to relieve tension so the drum can be supported and moved slightly for access to the rollers underneath. Photograph the roller and axle positions before removing anything. Remove the retaining clip or fastener holding the worn roller's axle in place, then slide the old roller off. Install the new 12638000004021 roller onto the axle in the same orientation, and secure it with the retaining clip or fastener. While you're in there, check the other rollers by spinning each one by hand — if any feel stiff, gritty, or worn, replace them at the same time, since they're typically the same age and wear on a similar schedule. Re-tension the belt around the idler pulley, reassemble the rear panel, restore power, and run a short empty cycle to confirm the noise has resolved. Tools needed: Phillips screwdriver, nut driver, pliers, work gloves.
Frequently Asked Questions
My dryer makes a rumbling noise that gets louder over time. Is this the part I need?
Yes, this is the classic symptom of a worn drum roller. As the wheel and bearing wear down, the noise typically starts subtle and gradually worsens, often becoming most noticeable with a full load as the extra weight puts more load on the worn wheel. If the noise rises and falls in rhythm with the drum turning, a roller is the most likely cause.
Should I replace just one roller, or all of them?
It's worth checking all of them while you have access. Dryers typically use more than one roller supporting the drum, and since they're the same age and under the same stress, if one has worn out the others are often not far behind. Spin each roller by hand — if any feel stiff, gritty, or rough, replace them together to avoid repeating this repair again soon.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Midea to factory specifications — guaranteed fit, materials, and performance. It matches the original wheel design, bearing, and axle fitment of the drum roller originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ERP 154578801 Dishwasher Door Hinge Cable
Replaces Part Numbers: 154578801, 1196201, AH1524995, EA1524995, AP3958767, PS1524995.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
(4 Pack) XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse – Universal HVAC Replacement
Product Description
Protect your HVAC system’s control board with the XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse (4 Pack). These high-quality aftermarket blade fuses are designed to safeguard furnace and air conditioner control boards from electrical overloads and short circuits. A blown 5-amp fuse can cause the HVAC system to stop working entirely. Replacing it with reliable XPATC5 fuses helps restore operation while protecting sensitive electronic components.
XPATC5 fuses are commonly used in residential HVAC systems and are ideal to keep on hand for quick repairs.
Replaces Part Numbers
ATC-5, ATO-5, 5 Amp HVAC Control Fuse, Furnace Control Board Fuse, Air Conditioner 5A Fuse
Compatibility
This 5 amp HVAC control board fuse is compatible with many furnace and air conditioner systems from manufacturers including Carrier, Trane, Lennox, Goodman, Rheem, York, and others that use standard ATC/ATO 5-amp blade fuses.
Always verify fuse amperage and type before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent electrical specifications
⚡ 5 Amp Rating – Protects HVAC control boards from overloads
🧯 Critical Safety Component – Helps prevent damage to circuit boards
📦 Convenient 4-Pack – Keep spares on hand for future service
💰 Cost-Effective Solution – Affordable alternative to OEM HVAC fuses
📐 Product Specification
Part Number: XPATC5
Component Type: HVAC Control Board Fuse
Amperage Rating: 5 Amp
Voltage Rating: 32V
Fuse Style: ATC / ATO Blade Fuse
Quantity: 4-Pack
Application: Furnace & air conditioner control boards
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Needle-nose pliers or fuse puller
⚠️ Safety First: Always turn off power to the HVAC system before replacing fuses to avoid electrical shock or equipment damage.
Basic Steps:
Shut off power to the furnace or air conditioner.
Open the control board access panel.
Locate the blown 5-amp fuse.
Remove and replace it with a new XPATC5 fuse.
Restore power and test system operation.
⏱️ Time Required: 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket HVAC Parts
🔄 30-Day Return Policy
Protect your HVAC system and keep it running — Add to Cart Now for a reliable, budget-friendly solution!
XPARTCO 3392519 Dryer Thermal Fuse Replaces WP3392519
The XPARTCO 3392519 is an aftermarket replacement dryer thermal fuse compatible with select gas and electric dryers from Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef. The thermal fuse is a critical one-time-use safety device mounted on the exhaust duct or blower wheel housing that monitors the dryer's operating temperature.
When the dryer overheats — typically due to a clogged exhaust vent or restricted airflow — the thermal fuse permanently opens the circuit and cuts power to the heating system to prevent a fire. Once blown, the thermal fuse cannot be reset and must be replaced. This part measures 2 inches long x 1/2 inch wide, features two 3/16-inch terminals, and opens at approximately 196°F (91°C). Important: always check and clear the exhaust vent when replacing this fuse, as restricted airflow is the most common cause of thermal fuse failure.
Quick Answer
The XPARTCO 3392519 Dryer Thermal Fuse fixes dryers that won't start, won't heat, or stop mid-cycle due to overheating. It is a one-time-use safety fuse that permanently opens at 196°F (91°C) to cut power and prevent fires. Compatible with select Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef dryers. Replaces WP3392519 and many other part numbers.
Common Problems This Part Fixes
Dryer won't start at all
Dryer runs but produces no heat
Dryer stops mid-cycle and won't restart
Timer advances but drum does not heat
Dryer shuts off too soon before clothes are dry
No continuity detected across fuse terminals during testing
Replaces Part Numbers
This thermal fuse directly replaces the following OEM and cross-reference part numbers:
3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101, 6L4101091C, ET401, 3388651, 694511, 80005, AWP47582, PD00002311, EAP11741460, AP6008325, PS11741460
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse is compatible with select gas and electric dryers from the following brands:
Whirlpool dryers (including Duet and Cabrio series)
Kenmore / Sears dryers (including Elite series)
KitchenAid dryers
Maytag dryers (including Centennial and Neptune series)
Roper dryers
Estate dryers
Inglis dryers
Crosley dryers
Amana dryers
Admiral dryers
Magic Chef dryers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
One-time-use safety device — permanently opens at 196°F (91°C) to cut power and prevent dryer fires
Mounts on the exhaust duct or blower wheel housing — easy access for DIY replacement
Aftermarket replacement built to OEM-equivalent quality standards
2-terminal design — direct drop-in replacement, no modification required
Broad compatibility across 11 major appliance brands
DIY-friendly repair — installs with basic hand tools in under 30 minutes
Budget-friendly safety fix — one of the most common and least expensive dryer repairs
Product Specifications
Part Number
3392519
Part Type
Dryer Thermal Fuse
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Opening Temperature
196°F (91°C)
Length
2 inches
Width
1/2 inch
Terminal Size
3/16 inch (2 terminals)
Resettable
No — one-time use only, must be replaced when blown
Location on Dryer
Exhaust duct / blower wheel housing
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, Magic Chef
Installation Notes
⚠️ Safety First — Unplug Dryer and Shut Off Gas Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. The thermal fuse is located on the exhaust duct or blower wheel housing — access it by removing the back or front panel depending on your dryer model. Disconnect the two wire terminals from the old fuse, remove the fuse from its bracket, install the new fuse in the same position, reconnect the terminals, and reassemble the panel. Tools needed: Phillips screwdriver, 1/4-inch nut driver, and a multimeter to confirm the new fuse has continuity. ⚠️ Important: Before completing the repair, always check and clear the exhaust vent of any lint buildup — a blocked vent is the most common cause of thermal fuse failure and will blow the new fuse if not corrected.
Frequently Asked Questions
Will the 3392519 fit my dryer?
This thermal fuse is compatible with select gas and electric dryers from Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef. Use the model search above to verify your model, or contact our support team before ordering.
What does a dryer thermal fuse do?
The thermal fuse is a one-time-use safety device that monitors the temperature inside the dryer. When the dryer overheats — typically due to a clogged exhaust vent — the fuse permanently opens the circuit, cutting power to the heating system to prevent a fire. Once blown, it cannot be reset and must be replaced.
How do I know if my thermal fuse is blown?
Test the fuse with a multimeter set to continuity mode. Touch the probes to each of the two terminals. A working fuse will show continuity (beep or near-zero ohms). A blown fuse will show no continuity (open circuit). If there is no continuity, the fuse is blown and must be replaced.
Why did my thermal fuse blow?
The most common cause is restricted airflow due to a clogged or kinked exhaust vent, a plugged lint trap, or a damaged blower wheel. Always check and clear the exhaust vent before or after replacing the fuse — failing to do so will cause the new fuse to blow again.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is designed to deliver reliable overheat protection at a more affordable price point.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. Our team is available to help you verify compatibility before you buy.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM 280187 Washer Drain Pump Assembly
The 280187 is a genuine OEM drain pump assembly from Whirlpool for Whirlpool-built front-load washers sold under the Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid, and Amana names. The drain pump pushes water out of the tub through the drain hose at the end of the wash and rinse stages. When it clogs, wears out, or seizes, the washer can stop with water still in the drum, throw drain errors, stop before the spin cycle, leak, or make loud humming or grinding noises.
This is a complete drain pump assembly, including the pump motor and housing, so it replaces the whole unit rather than just an internal part. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. The pump sits at the base of the washer behind the lower front panel, and the swap typically takes 15–30 minutes with common hand tools.
Quick Answer
The Genuine OEM 280187 Drain Pump Assembly fixes a Whirlpool-built front-load washer that won't drain, leaves water in the drum, stops before spinning, leaks from the pump, or makes loud noise during draining. Complete pump motor and housing, genuine OEM. Classic symptom: the cycle stalls with water still in the tub, or you hear a loud hum or grind while it tries to drain.
Common Problems This Part Fixes
Washer won't drain, or water is left in the drum after the cycle
Drain error codes or the cycle stopping before the spin
Loud humming, grinding, or rattling while the washer drains
Water leaking from the pump or its housing
Pump motor seized or not running
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump assembly replaces the following part numbers:
280187 replaces 1200164, 285998, 8181684, 8182819, 8182821, AH1485610, AP3953640, AWP39453, EA1485610, EAP1485610, PD00002352, PS1485610
These are Whirlpool's current and earlier numbers for this pump. If your old pump or parts diagram shows any of them, this is the matching replacement.
Compatibility
This pump is listed for select front-load washers from:
Whirlpool, including Duet models such as WFW9400VE03, WFW9500TW03, and WFW9600TW02
Kenmore and Kenmore Elite, including 11042822200, 11042926200, 11045962400, and 11045966403
Maytag, including MHWE400WR00 and MHWE400WW0
KitchenAid, including KHWS02RWH0
Amana
Note: The model list above is only a sample, since this pump fits many more models. Confirm fit by matching the number on your old pump or parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This pump is for front-load washers and is not intended for top-load machines.
Key Features
Genuine OEM Whirlpool drain pump assembly, not an aftermarket equivalent
Complete unit with pump motor and housing
Restores full draining so cycles finish and the washer can spin
Cross-references to Whirlpool 280187, 285998, 8181684, 8182819, and 8182821
Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and Amana front-load washers
Typical installation 15–30 minutes with common hand tools
Product Specifications
Part Number
280187
OEM Part Number
280187
Part Type
Washer Drain Pump Assembly
Condition
Genuine OEM
Included
Pump Motor and Housing
Application
Select Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid & Amana Front-Load Washers
Installation Notes
⚠️ Unplug Power and Expect Water Unplug the washer and turn off the water supply before starting. Remove the lower front panel to reach the pump at the base of the washer, then drain any residual water into a shallow pan or with a wet/dry vacuum, using the drain hose or the small drain cap if your model has one. Disconnect the wiring harness from the pump, then loosen the clamps holding the hoses and pull the hoses off. Remove the pump's mounting screw and take out the old pump. Fit the new pump in the same position, reattach the hoses with the clamps (replace worn clamps if needed), and reconnect the wiring harness. Check that the pump and hose connections are secure, replace the front panel, restore power and water, and run a drain cycle while checking for leaks. Common tools include a nutdriver or Torx driver, screwdrivers, and pliers.
Frequently Asked Questions
My washer won't drain. Is this the part I need?
A failed or clogged drain pump is one of the most common causes. Before replacing it, check the drain hose and the pump filter for a clog, such as a sock or coin. If the filter is clear but the pump hums, grinds, or doesn't run, replacing the pump should fix it.
Does this include the pump motor?
Yes. This is the complete assembly, with the pump motor and housing.
My old pump is marked 285998, 8181684, 8182819, or 8182821. Will this work?
Yes. All of those are earlier Whirlpool numbers for this pump, and 280187 is the current number.
Will this fit my top-load washer?
It is intended for front-load washers. Contact our support team with your model number if you're unsure, and we'll confirm before you order.
Is this an OEM part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent, so it matches the original factory fit and specification.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
