W11645245 Genuine OEM Whirlpool Refrigerator Dual Water Valve
The W11645245 is a genuine Whirlpool OEM dual water inlet valve for Whirlpool-built refrigerators. Mounted at the rear of the refrigerator where the household water line connects, this single valve is the central control point for water flow to two separate features: the ice maker and the door-mounted water dispenser. When either feature calls for water, this valve's solenoids open to admit it and close again once the request is satisfied — since one valve handles both jobs, a failure here can affect the ice maker, the dispenser, or both at the same time.
Common causes of failure include mineral and sediment buildup from the household water supply interfering with the valve's internal operation over time, and electrical faults either in the valve itself or in the refrigerator's electronic control board that signals it. A failing dual water valve produces a recognizable set of symptoms: the door dispenser stops delivering water, the ice maker slows down, stops producing ice, or fails intermittently, water leaking around the valve area, or an audible electronic buzzing or humming sound coming from the back of the refrigerator. It directly replaces AP7208917, W11546685, W11446818, W11563296, and PS16875686. As a genuine OEM part, the W11645245 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The W11645245 Genuine OEM Whirlpool Refrigerator Dual Water Valve fixes Whirlpool-built refrigerators where the door water dispenser stops working, the ice maker slows down or stops making ice, there's a leak near the valve at the back of the refrigerator, or you hear an electronic buzzing or humming sound. Controls water flow to both the ice maker and water dispenser from a single valve. Replaces AP7208917, W11546685, W11446818, W11563296, PS16875686. Before replacing, rule out a simple mineral clog and a faulty control board signal — both can produce identical symptoms to a failed valve.
Common Problems This Part Fixes
Water dispenser on the refrigerator door has stopped working
Ice maker has slowed down, stopped producing ice, or is malfunctioning intermittently
Both the ice maker and water dispenser affected at the same time
Water leaking around the valve area at the back of the refrigerator
Electronic buzzing or humming sound coming from behind the refrigerator
Reduced water flow or pressure at the dispenser
Valve that hums but doesn't appear to be passing water through
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator dual water valve directly replaces the following OEM and cross-reference part numbers:
W11546685, W11446818, W11563296, AP7208917, AWP46513, K-79524K, N-86-QC N, PD00080446, PS16875686
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This dual water valve is compatible with select Whirlpool-built refrigerators across the Whirlpool family of brands, including:
Whirlpool refrigerators — WRS series (including WRS321SDHZ08)
Maytag, Jenn-Air, and Amana refrigerators (select models)
KitchenAid, Magic Chef, Admiral, and Norge refrigerators (select models)
Roper refrigerators (select models)
Select Kenmore and Ikea refrigerators built on the Whirlpool platform
Note: This is a dual-function valve serving both the ice maker and water dispenser from a single unit — it is not a hot/cold laundry-style valve pair. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified solenoid design and flow-rate calibration
Dual water inlet valve — controls water flow to both the ice maker and door water dispenser
Resolves "dispenser not working," "ice maker slow or not making ice," "leak near the valve," and "buzzing or humming noise" symptoms caused by valve failure
Single central valve simplifies diagnosis and replacement compared to separate dedicated valves
Direct drop-in replacement — mounts to the original rear connection point
Replaces W11546685, W11446818, W11563296, AP7208917, and PS16875686
Compatible with a wide range of Whirlpool, Maytag, Jenn-Air, Amana, KitchenAid, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Straightforward DIY repair using basic hand tools
Product Specifications
Part Number
W11645245
Part Type
Refrigerator Dual Water Inlet Valve (Ice Maker + Dispenser)
Condition
Genuine OEM
Brand
Whirlpool
Location
Rear of refrigerator, at the household water line connection
Function
Controls water flow to the ice maker and door water dispenser
Connection Type
1/2" water line inlet, NPT threaded
Quantity
1 valve
Compatible Brands
Whirlpool, Maytag, Jenn-Air, Amana, KitchenAid, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Refrigerator Before Starting — Have A Towel Ready Disconnect power at the outlet, and shut off the water supply valve behind or below the refrigerator before beginning. Wear work gloves. Pull the refrigerator away from the wall for access, then locate the valve at the rear or bottom of the cabinet where the water supply line connects. Have a towel or shallow pan ready, since residual water will spill out when you disconnect the line. Photograph the wiring and water line connections before disconnecting anything. Disconnect the water supply line from the old valve, disconnect the electrical connector, and remove the mounting screws holding it in place, then pull the valve free. Install the new W11645245 in the same position, secure the mounting screws, and reconnect the electrical connector fully. Reattach the water supply line, tightening securely by hand plus a partial turn with pliers — avoid overtightening plastic threaded fittings. Restore the water supply and check the connection for leaks before restoring power. Push the refrigerator back into place, then test both the ice maker and water dispenser over the next day to confirm normal operation has returned. Tools needed: Phillips screwdriver, adjustable wrench or pliers, towel or shallow pan, work gloves.
Frequently Asked Questions
My dispenser stopped working but the ice maker still works. Is this the right part?
It's possible, but worth checking a couple of things first, since this valve serves both features from one unit. Confirm the water supply line isn't kinked or restricted, and check the inline water filter for a clog, since a blocked filter can starve the dispenser specifically while the ice maker (which may draw from a different point in the flow path depending on your model) keeps working. If the filter and supply line are clear and the dispenser still won't deliver water, the valve itself is the likely cause.
I hear a buzzing or humming sound from the back of the fridge. What does that mean?
This is a common symptom of a valve that's receiving an electrical signal to open but isn't passing water through correctly — the solenoid coil energizes and hums, but water flow is restricted or absent, often due to internal mineral buildup or a failing internal mechanism. If you hear this sound whenever the ice maker or dispenser is called on, the valve is a strong suspect.
Could the problem actually be my water filter instead of this valve?
Yes, it's worth ruling out first. A clogged inline water filter can produce very similar symptoms to a failing valve — reduced dispenser flow, slow ice production, or both. Try replacing the water filter first if it's been a while since the last change; if symptoms persist afterward, the dual water valve is the more likely cause.
Could this be a control board issue instead of the valve?
It's possible. This valve is triggered electrically by the refrigerator's control board, so a fault there can produce symptoms that look identical to a failed valve — no water reaching the ice maker or dispenser even though the valve itself is fine. If replacing the valve doesn't resolve the issue, the control board is the next component worth investigating.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It includes the same dual-function solenoid design and connection configuration as the valve originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
4 Pack - XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller - Compatible with select Samsung models
Product Description
Restore smooth operation to your dishwasher with the XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller. This replacement roller is designed as a replacement for select Samsung dishwashers, offering a cost-effective alternative to the original. It supports the lower dish rack, ensuring it glides smoothly in and out for easy loading and unloading. This part addresses issues like the rack sticking, wobbling, or falling off the rails, often caused by worn or broken rollers.
Note: Includes (1) lower dish rack roller. Disconnect power before installation. Verify compatibility with your dishwasher model.
Replaces part numbers: DD66-00023A, PD00002184, EAP4222532, DW0023A, AP4342187, 2002711, PS4222532.
Compatibility:
Compatible with select Samsung dishwasher models, including but not limited to:
Samsung: DW80J3020US/AA-0000, DW80J3020US/AA-0001, DW80J3020US/AA-0002, DW80J3020US/AA-0003, DW80J3020US/AA-0004, DW80J3020US/AA-0005, DW80J3020US/AA-0006, DW80J3020US/AA-0007, DW80J3020US/AA-0008, DW80J3020US/AA-0009, DW80J3020US/AA-0010, DW80J3020US/AA-0011, DW80J3020US/AA-0012, DW80J3020US/AA-0013, DW80J3020US/AA-0014
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dishwashers.
🔧 Specifications: High-quality plastic roller with metal axle.
💪 Reliable Performance: Ensures smooth gliding of the lower dish rack.
🛠️ Easy Installation: Tool-free; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves sticking, wobbling, or falling rack issues.
Product Specification
Part Number: XPARTCO DD66-00023A
Component Type: Dishwasher lower dish rack roller
Material: Plastic
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a reliable fix!
ERP 154578801 Dishwasher Door Hinge Cable
Replaces Part Numbers: 154578801, 1196201, AH1524995, EA1524995, AP3958767, PS1524995.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO HS810 Refrigerator 3-in-1 Hard Start Kit 1/12 to 1/5 HP 120V
The XPARTCO XPHS810 is a universal 3-in-1 hard start kit that combines a solid-state starting relay, a start capacitor, and thermal overload protection into a single prewired unit for refrigerator and freezer compressors rated 1/12 to 1/5 HP at 120V (110–125VAC). It's designed as a direct equivalent to the widely used Supco RCO810 and similar kits, giving a struggling compressor extra starting torque to overcome internal friction and gas pressure at startup — commonly used to fix the classic "click-buzz-click" no-start symptom without replacing the entire compressor.
The kit is fully prewired with color-coded leads (typically black = Common, white = Start, red = Run) and mounts directly onto the compressor's terminal pins, with instructions printed on the unit itself. It directly replaces Supco RCO810, URCO810, URC0810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, ERPU810, HS8, HS810, HS81, PCS810, and Mars 32781. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The XPARTCO HS810 3-in-1 Hard Start Kit fixes refrigerators and freezers whose compressor makes a repeated "click-buzz-click" sound and fails to start, or that shut off on thermal overload during startup. Combines relay, start capacitor, and overload protector in one prewired unit for 1/12 to 1/5 HP compressors, 120V, 3.5A RLA. Replaces Supco RCO810, URCO810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, HS8, HS810, HS81, PCS810, Mars 32781. Do not install on LG linear/inverter compressors — see Installation Notes.
Common Problems This Part Fixes
Compressor makes a repeated "click-buzz-click" noise and fails to start
Refrigerator or freezer runs warm because the compressor won't stay running
Compressor hums but doesn't start, then trips off on overload
Refrigerator cycles on and off rapidly without reaching temperature
Older or worn compressor that starts hard, especially after a power outage
⚠ Capacitor Hazard — Read Before Servicing This kit contains a start capacitor, which can store a dangerous electrical charge even after the refrigerator is unplugged. Always disconnect power before servicing, and discharge the capacitor safely (using an insulated-handle resistor tool or by briefly shorting the terminals with an insulated screwdriver) before handling it. Never touch capacitor terminals with bare hands. If you are not comfortable working around stored electrical charge, have this repair performed by a qualified technician.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This 3-in-1 hard start kit directly replaces the following OEM and cross-reference part numbers:
XPHS810, RCO810, URCO810, URC0810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, ERPU810, HS8, HS810, HS81, PCS810, Mars 32781
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This universal hard start kit is compatible with refrigerator and freezer compressors in the following range:
Compressors rated 1/12 HP through 1/5 HP
120V (110–125VAC) single-phase compressors
Standard PSC (permanent split capacitor) and RSIR compressor types across Whirlpool, GE, Frigidaire, LG, Samsung, and most other major brands
Important: Do NOT install this kit on LG linear/inverter compressors, or any compressor using a variable-speed inverter board (often labeled "Inverter," "Linear," "BLDC," or "Digital"). Connecting a standard hard start kit to an inverter-driven compressor can destroy the inverter control board. Check your compressor's label before ordering, or contact our support team with your model number if you're unsure.
Key Features
3-in-1 design combines starting relay, start capacitor, and thermal overload protector in one prewired unit
Delivers additional starting torque to help a struggling compressor overcome startup friction and gas pressure
Resolves "click-buzz-click," "won't start," and "trips on overload" symptoms on eligible compressors
Rated for 1/12 to 1/5 HP compressors at 120V, 3.5A RLA
Prewired, color-coded leads with instructions printed on the unit for straightforward installation
Can operate with or without an existing run capacitor
Replaces Supco RCO810, URCO810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, HS8, HS810, HS81, PCS810, and Mars 32781
Aftermarket replacement built to OEM-equivalent quality and safety standards
Product Specifications
Part Number
XPHS810
Equivalent To
Supco RCO810 / RC0810
Part Type
3-in-1 Refrigerator/Freezer Hard Start Kit (Relay, Capacitor, Overload)
Condition
Aftermarket Replacement
HP Range
1/12 to 1/5 HP
Voltage
120V (110–125VAC)
Current Rating
3.5A RLA
Terminal / Wire Color Code
Black = Common (C), White = Start (S), Red = Run (R) — typical; confirm against included diagram
Not Compatible With
LG linear/inverter compressors
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Discharge Capacitor Safely Disconnect power before beginning. Before touching any wiring, check your compressor's data label to confirm it is NOT a linear/inverter/BLDC compressor — this kit is not compatible with those and can damage the inverter board if connected. Access the compressor compartment, typically at the rear or bottom of the unit. Remove the existing relay/overload assembly by gently pulling it straight off the compressor terminal pins — do not force or twist. Use a multimeter to confirm which pins are Common (C), Start (S), and Run (R) if not already labeled. Connect the hard start kit's wires to the matching pins. Wire the kit's main power leads into the refrigerator's supply wiring using wire nuts, following the included diagram. Secure the kit with zip ties or its mounting strap to prevent vibration damage during compressor operation. Restore power and confirm the compressor starts smoothly without repeated clicking. Tools needed: nut driver or screwdriver, digital multimeter, wire nuts, insulated screwdriver (for capacitor discharge).
Frequently Asked Questions
My compressor makes a clicking or buzzing sound and won't start — will this fix it?
A hard start kit resolves this in many cases, especially on older or worn compressors that struggle to overcome internal gas pressure at startup. However, "click-buzz-click" can also indicate a failing compressor winding or a compressor nearing end of life. If the hard start kit doesn't resolve the issue, the compressor itself may need replacement — a hard start kit can extend a marginal compressor's life but can't revive one with failed internal windings.
Can I use this on any refrigerator?
This kit works on standard PSC and RSIR compressors within the 1/12 to 1/5 HP range at 120V. It is NOT compatible with LG linear/inverter compressors or any variable-speed inverter-driven compressor — connecting it to one of those can destroy the inverter control board. Check your compressor's label for "Inverter," "Linear," "BLDC," or "Digital" before ordering.
Do I need to remove my existing start capacitor or relay first?
Yes — remove the old relay/overload assembly from the compressor terminal pins before installing this kit. The XPHS810 is designed to work with or without an existing separate run capacitor remaining in the circuit, but the old start relay and any old start capacitor should be removed and replaced by this kit, not left in place alongside it.
Is this safe to install myself?
Many DIYers install hard start kits successfully, but this repair involves a capacitor that can hold a dangerous electrical charge even after the unit is unplugged, plus correctly identifying compressor terminals. If you're not comfortable working around stored electrical charge or don't have a multimeter to confirm terminal identification, we'd recommend having a qualified technician perform this repair.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
2-Pack XPARTCO WB03X27704 Microwave Waveguide Locking Button – Compatible with GE Microwaves
Product Description
Protect your microwave’s internal components with the XPARTCO WB03X27704 Microwave Waveguide Locking Button. This high-quality aftermarket replacement secures the waveguide cover in place, preventing it from shifting, falling, or allowing food splatter to enter the waveguide channel. A broken or missing locking button can lead to sparking, uneven heating, or damage to the magnetron. Replacing it with this durable XPARTCO button restores safe and reliable microwave performance.
Replaces Part Numbers
WB03X27704, WB02X10997, PD00045753, EAP12582530, AP6783280, 4813990, PS12582530
Compatibility
This replacement waveguide locking button fits select GE countertop, over-the-range, and built-in microwaves.
Example compatible models include (but are not limited to):GE JVM3160DFWW, JVM6175SK3SS, JVM7195SK5SS, PVM9005SJ2SS, and many others.
Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM fit, size, and retention strength
🔒 Secures Waveguide Cover – Prevents shifting, sparking, or magnetron contamination
💰 Cost-Effective Solution – Affordable alternative to OEM locking buttons
🛠️ Durable Construction – Precision-molded plastic resists heat and wear
🛡️ Fixes Common Issues – Solves loose or missing cover, arcing, or uneven microwave heating
📐 Product Specification
Part Number: WB03X27704
Component Type: Microwave Waveguide Cover Locking Button
Material: High-strength molded plastic
Color: Black (may vary slightly by batch)
Mounting: Snaps into microwave cavity to retain waveguide cover
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: None (in most models)
⚠️ Safety First: Always unplug the microwave before servicing.Microwaves contain high-voltage components even when unplugged — avoid internal access unless qualified.
Steps:
Disconnect power to the microwave.
Open the microwave interior and remove the damaged or missing locking button.
Position the new XPARTCO WB03X27704 locking button in the designated cavity slot.
Press firmly until it snaps into place.
Ensure the waveguide cover is securely held.
Restore power and test microwave operation.
⏱️ Time Required: 1–2 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your microwave and prevent sparking — Add to Cart Now for a fast, reliable fix!
XPARTCO WB39X10034 Microwave Waveguide Cover – Compatible with GE Microwaves
Product Description
Protect your microwave’s internal components from grease, steam, and food splatter with the XPARTCO WB39X10034 Microwave Waveguide Cover. This high-quality aftermarket replacement shields the magnetron and waveguide channel, preventing damage and reducing the risk of sparking or arcing. A burned, cracked, or missing waveguide cover can cause uneven heating or loud popping sounds. Replacing it with this XPARTCO cover restores safe and efficient microwave performance.
Replaces Part Numbers
WB39X10034, 1810876, 262100100006, EAP3486812, PD00057680, AH3486812, EA3486812, AP4980541, PS3486812.
Compatibility
This replacement waveguide cover fits select GE microwaves, including countertop, over-the-range, and built-in units.
Example compatible models include (but are not limited to):GE JVM1340WW002, JVM1660WB004, JVM1540DN1WW, and many additional models.
Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM fit, thickness, and heat resistance
🔥 High-Temperature Mica Material – Safely withstands microwave energy and heat
🛡️ Protects Waveguide Channel – Prevents grease and food particles from reaching the magnetron
💰 Budget-Friendly Solution – Reliable alternative to OEM waveguide covers
🛠️ Quick Installation – Easily installs with clips or screws depending on model
⚡ Fixes Common Issues – Solves sparking, arcing, burning smells, and uneven heating
📐 Product Specification
Part Number: WB39X10034
Component Type: Microwave Waveguide Cover
Material: Mica sheet (heat-resistant composite)
Color: Light gray
Mounting: Clip-in or screw-in (varies by microwave model)
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver (if screw-mounted)
⚠️ Safety First: Always unplug the microwave before servicing.Microwave repairs involve high voltage even when unplugged — avoid internal access unless qualified.
Steps:
Disconnect microwave power.
Locate the old or damaged waveguide cover inside the cavity.
Remove clips or screws holding the cover.
Install the new XPARTCO WB39X10034 cover securely in place.
Ensure there are no gaps around the edges.
Restore power and test for normal heating.
⏱️ Time Required: 1–3 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop microwave sparking and protect internal components — Add to Cart Now for a fast, reliable fix!
WR2X9391 Refrigerator Genuine OEM Light Socket – Compatible with GE, Hotpoint Refrigerators
Product Description
Illuminate your refrigerator interior with the WR2X9391 Refrigerator Genuine OEM Light Socket. This factory-approved socket provides a secure electrical connection for the interior light bulb, ensuring consistent illumination inside the fridge and freezer compartments. A damaged or faulty socket may cause the light to stop working, flicker, or fail to hold the bulb securely. Replacing it with this genuine OEM part restores reliable lighting and safe appliance operation.
Replaces Part Numbers
WR2X9391, 2446, SWR2X7270, WR02X0543, WR02X1038, WR02X11990, WR02X1670, WR02X1671, WR02X1846, WR02X2024, WR02X2257, WR02X2258, WR02X2432, WR02X3998, WR02X5691, WR02X5858, WR02X5993, WR02X7270, WR02X8265, WR02X9391, WR2X1038, WR2X1670, WR2X1671, WR2X1846, WR2X2024, WR2X2257, WR2X2258, WR2X2432, WR2X3998, WR2X543, WR2X5691, WR2X5858, WR2X5993, WR2X7270, WR2X8265, AP2060923, AH299782, EA299782, PS299782.
Compatibility
This genuine OEM light socket is compatible with select GE and Hotpoint refrigerators.
Example compatible models include (but are not limited to): GE GTS18FBSARWW, GE TFX22PRDAWW, and Hotpoint HSS25IFMCWW.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM Part – Factory-approved light socket for GE and Hotpoint refrigerators
💡 Reliable Lighting – Restores bright, consistent illumination inside your appliance
💰 Cost-Effective Repair – OEM replacement ensures durability and long life
🛠️ Quick DIY Installation – Installs in minutes with simple tools
🛡️ Fixes Common Issues – Solves no-light, flickering, or loose bulb connection problems
📐 Product Specification
Part Number: WR2X9391
Component Type: Refrigerator Light Socket
Material: High-durability plastic housing with secure electrical contacts
Mounting: Direct-fit replacement, screw-in installation
Operating Conditions: Designed for refrigerator/freezer compartments
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver
⚠️ Safety First: Always unplug the refrigerator before starting repairs to prevent electrical shock.
Steps:
Disconnect power and remove the interior light cover.
Unscrew or release the old light socket.
Detach the wiring harness from the old socket.
Connect the harness to the new WR2X9391 socket.
Secure socket in place and reinstall light cover.
Restore power and test the light.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Bring back bright lighting in your refrigerator — Add to Cart Now for a safe, factory-approved repair!
XPARTCO DA82-01415A Refrigerator Water Leak Service Kit
Water leak repair kit with updated internal duck bill.
Fits select Samsung refrigerator models.
Replaces Part Numbers: DA82-01415A, 3436781, AP5957964, PS10058968.
Description: This Water Leak Repair Kit is a replacement part for select Samsung refrigerator models, this field service kit used to address water leakage and excessive frost in bottom freezer or French door refrigerators with dual evaporators. The kit includes a drain probe, two drain tubes, and two silver foam strips. With these parts, you can prevent excessive frost buildup on the evaporator cover and fix issues like water leaks under the crisper or odd fan noises that stop when the doors are opened.
This is an aftermarket part that can be used as a replacement for the OEM part
XPARTCO 3405-001034 Microwave Door Switch (Normally Open)
The XPARTCO 3405-001034 is an aftermarket replacement normally open (NO) microwave door interlock switch for select Samsung, Whirlpool, Maytag, Kenmore and other microwave ovens, replacing part 3405-001034. The switch detects when the door is fully closed and completes the safety circuit, so the microwave runs only when the door is shut. When it fails, the microwave may not start, may not heat, or may only run if you push or jiggle the door.
Microwaves often use more than one door switch, and each is sold individually. Check that the switch you are replacing is the normally open type and goes in the same position.
⚠️ Critical Safety Part — Switch Type And Position Must Match Exactly Door interlock switches work together as a safety system. Installing the wrong type (normally open vs. normally closed) or putting a switch in the wrong position can let the microwave run with the door open, a serious radiation hazard. Replace each switch with the exact same type in the exact same position, and test the microwave after replacement. If you are not qualified to service microwave ovens, use a trained technician.
Quick Answer
The XPARTCO 3405-001034 Microwave Door Switch (Normally Open) replaces a failed normally open door interlock switch on a compatible microwave. Replaces 3405-001034 and 3405-000178. Classic symptoms: the microwave won't start, won't heat, or only runs when you push or jiggle the door.
Common Problems This Part Fixes
Microwave won't start
Microwave runs but doesn't heat
Microwave only works if you push or jiggle the door
Microwave doesn't shut off properly when the door opens
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave door switch directly replaces the following part numbers:
3405-001034, 3405-000178, AP4044834, ASM392474, EAP11741686, PD00025810, PS4131192, WP3405-001034, AP6008546, AWP47167, PD00078424, PS11741686
Samsung also uses nearby numbers, such as 3405-001033, for different switches. They are not interchangeable by number alone. If your old switch shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This switch is listed for Samsung, Whirlpool, Maytag, Amana, Jenn-Air, Kenmore and Magic Chef microwave ovens and microwave/oven combinations, including these examples:
Kenmore 40180082010, 40180099700, 40185042010
Samsung SMH1622W
Note: The models above are a small sample of those listed by retailers. Confirm that your original switch is normally open and goes in the same position, check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Normally open (NO) microwave door interlock switch
Aftermarket replacement for Samsung and Whirlpool 3405-001034
Completes the safety circuit only when the door is fully closed
Sold individually, one switch per order
Product Specifications
Part Number
3405-001034
OEM Part Number
3405-001034
Part Type
Microwave Door Interlock Switch
Condition
Aftermarket Replacement
Switch Type
Normally Open (NO)
Application
Select Microwave Ovens and Microwave/Oven Combinations
Installation Notes
⚠️ Unplug Microwave And Beware Of The High Voltage Capacitor Unplug the microwave before starting and never operate it with the cabinet open. The high voltage capacitor can hold a lethal charge even after the microwave is unplugged. If your repair requires removing the outer cabinet, discharge the capacitor safely first, or have a qualified technician do the work.
⚠️ Photograph Switch Positions Before Removing Anything The switches are accessed at the door latch assembly. Before disconnecting anything, photograph each switch and its wiring, and move the wires one at a time so each goes back to the correct terminal. Make sure the actuator lines up with the latch and the switch clicks freely. After reassembly, test the microwave with a microwave-safe cup of water.
Frequently Asked Questions
My microwave won't heat or start. Is this the part I need?
A failed door switch is a common cause, but a microwave has several switches and other parts can cause the same symptoms. Identify which switch failed and confirm it is normally open before ordering.
Is this switch normally open or normally closed?
This is a normally open (NO) switch. It is not interchangeable with normally closed switches, which do a different job in the interlock system.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace part 3405-001034. If you specifically need a genuine part, contact our support team.
Will this fit my microwave?
It is listed for many Samsung, Whirlpool, Maytag and Kenmore models, but the model list above is only a sample. Check your full model number and the type and position of your original switch, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
W11230103 Dishwasher Sump Pump and Motor
Replaces Part Numbers: W11230103, W10620220, 4591207, AP6329759, PS12349660.
Description: This Pump & Motor is an OEM part for Whirlpool dishwasher models. It serves as the heart of the wash system by providing water circulation and spray throughout all cycles. The pump circulates water mixed with detergent to clean dishes effectively.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
