XPARTCO W10528947 Washer Drive Hub Kit
The XPARTCO W10528947 is an aftermarket replacement washer basket drive hub kit compatible with select top-load washing machines from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. The drive hub is a critical transmission component that connects the spin basket to the spin shaft, transferring power from the motor to rotate the wash basket and agitate laundry during each cycle.
This kit includes one basket drive hub and one drive block retainer — everything needed to restore proper spinning and agitation function. Common causes of drive hub failure include normal wear over time, strain from heavy or unbalanced loads, and physical damage from impact. A worn or cracked hub typically results in the basket slipping, failing to spin, or producing loud clicking and grinding noises during operation.
Quick Answer
The XPARTCO W10528947 Washer Drive Hub Kit fixes washers that won't spin, spin weakly, make clicking or grinding noises, or leave clothes too wet after the cycle. It connects the spin basket to the spin shaft and is compatible with select Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis top-load washers.
Common Problems This Part Fixes
Washer not spinning or agitating at all
Weak or slow spin — clothes coming out too wet
Clicking, grinding, or loud noises during spin cycle
Basket slipping under load
Washer pumping but not spinning
Excessive shaking or movement during operation
Replaces Part Numbers
This kit directly replaces the following OEM and cross-reference part numbers:
W10528947, 2684908, W10396887, W10528947VP, W11771931, EAP6012095, AWP40580, PD00024946, AP5665171, PS6012095.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive hub kit is compatible with select top-load washers from the following brands:
Whirlpool top-load washers
Maytag top-load washers (including Bravos series)
Kenmore top-load washers (select models)
Amana top-load washers
Admiral top-load washers
Crosley top-load washers
Inglis top-load washers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Connects the spin basket to the spin shaft — restoring proper agitation and spin performance
Aftermarket replacement built to OEM-equivalent quality standards
Kit includes one basket drive hub and one drive block retainer for a complete repair
Made from durable plastic construction designed to withstand regular wash cycle stress
DIY-friendly repair — installs with basic hand tools in 30–60 minutes
Budget-friendly alternative to OEM at a lower cost without sacrificing performance
Product Specifications
Part Number
W10528947
Part Type
Washer Basket Drive Hub Kit
Condition
Aftermarket Replacement
Application
Top-Load Washing Machine
Material
Durable Plastic (ABS)
Hub Dimensions
3-5/8" Diameter x 13/16" H
Retainer Clip Length
2-7/8"
Kit Includes
1 Basket Drive Hub + 1 Drive Block Retainer
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, Inglis
Installation Notes
⚠️ Safety First — Disconnect Power and Water Before Starting Unplug the washer from the power source and shut off the hot and cold water supply valves before beginning any repair. Remove the agitator or impeller (depending on your model) to access the drive hub. Unscrew the old hub and retainer, install the new drive hub kit in the same position, and reassemble the washer. Tools needed: multi-bit screwdriver, 7/16-inch socket with extension, and a nut driver. Allow 30–60 minutes for a complete repair. Consult your washer's service manual for model-specific instructions.
Frequently Asked Questions
Will the W10528947 fit my washer?
This kit is compatible with select top-load washers from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. Always verify your washer's model number before ordering. Contact our support team if you need help confirming compatibility.
What does the drive hub do?
The drive hub connects the spin basket to the spin shaft beneath the agitator. It transfers power from the motor to rotate the wash basket during the spin and agitation cycles. When the hub wears out or cracks, the basket can slip or stop spinning entirely.
What are the signs that my drive hub needs replacement?
Common signs include: the washer won't spin or agitate, the spin cycle is weak or slow, clothes come out too wet, or you hear clicking and grinding noises during operation. Excessive shaking or movement during the cycle can also indicate a worn hub.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is designed to deliver reliable, long-lasting performance at a more affordable price point.
What is included in the kit?
The kit includes one basket drive hub and one drive block retainer — the two components needed for a complete drive hub replacement.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. Our team is available to help you verify compatibility before you buy.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5304517886 Refrigerator / Freezer LED Light Bulb – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators
Product Description
Restore bright, energy-efficient interior lighting with the XPARTCO 5304517886 Refrigerator / Freezer LED Light Bulb. This high-quality aftermarket replacement provides clear, long-lasting illumination inside the refrigerator and freezer compartments. A failed LED bulb can cause dim or no lighting, making it difficult to see stored food. Replacing it with this XPARTCO LED bulb ensures reliable brightness while consuming less energy than traditional bulbs.
Replaces Part Numbers
5304517886, 216846400, 216518101, 5304510893, 240588001, 241552807, 297114000, 5304498578, 5304509249, 5304520040, 216222700, 216518100, 216608600, 216988000, 216988100, 241552801, 3091423, 4929381, 5303091423, 5304495326, 7216988100, 7241552801, 7297114000, C000501867, F000092472, KEI D28M, KEID28M, KEL 2815, KEL2815, AC100-265V 3.8W, PD00051346, EAP12712277, AP6873911, PS12712277.
Compatibility
This replacement LED light bulb fits select Frigidaire, Electrolux, and Kenmore refrigerators.
Example compatible models include (but are not limited to):Frigidaire FFSS2615TS0, FGHC2331PF5Electrolux EI23CS55GS1Kenmore 253.7031321A
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM brightness and fit
💡 Bright LED Illumination – Daylight 5000k, Clearly lights refrigerator and freezer interiors
⚡ Energy Efficient – Low power consumption with long service life
🛠️ Plug-and-Play Installation – Direct-fit bulb installs in minutes
🛡️ Fixes Common Issues – Solves dim lighting, flickering, or no interior light
📐 Product Specification
Part Number: 5304517886
Component Type: Refrigerator / Freezer LED Light Bulb
Light Type: LED
Color Temperature: Cool white, Daylight 5000k
Mounting: Twist-in or clip-in base (model dependent)
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: None (gloves recommended)
⚠️ Safety First: Unplug the refrigerator or turn off power before replacing the light bulb.
Steps:
Disconnect power to the refrigerator.
Remove the light cover, if applicable.
Remove the old LED bulb.
Install the new XPARTCO 5304517886 LED bulb securely.
Reinstall the cover and restore power.
Confirm proper illumination.
⏱️ Time Required: 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Brighten your refrigerator interior again — Add to Cart Now for a simple, cost-effective lighting upgrade!
XPARTCO W10780048 Washer Suspension Rods Kit
Washer Suspension Rods Kit, set of 4.
Fits specific Kenmore, Maytag, Whirlpool top load machine models.
Replaces Part numbers: W10780048, W10349191, 4185114, W10257087, W10257088, W10349193, W10748952, W10821948, AP5971398, PS11703290.
Description: This Suspension Rods are replacement parts for specific Kenmore, Maytag, Whirlpool washing machine models. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.
This is an aftermarket part that can be used as a replacement for the OEM part.
EXPHV14 Microwave H. V. Diode
Replaces Part Numbers: 00625682, 10001605, 3278398, AP5804800, PS8770335, W11256462, W10492276, W10492278, W10886077, WPW10492276, WPW10575765, 4393600, 461964697812, 4845678, 8184664, 8205361, W10163432, W10245187, W10575765, W11222648, AP6784287, PS12584264.
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
XPARTCO DC97-16350C Washer Suspension Support Rod - Compatible with Samsung Washers
Product Description
Stabilize your washer with the replacement DC97-16350C Washer Suspension Support Rod. This replacement suspension rod and spring assembly is designed for select Samsung top-load washers, supporting the washer tub to minimize vibration and noise during operation. It addresses issues like excessive shaking, off-balance drums, or "DC" error codes, offering a cost-effective alternative to OEM parts.
Note: Includes four suspension rod and spring assembly (approximately 25.6" long). recommend replacing all four rods for optimal performance. Disconnect power before installation. Verify compatibility with your washer model.
Replaces part numbers: DC97-16350C, DC97-16350J, 3282689, DC97-05280K, PD00007282, EAP4221572, AP5623264, PS4221572.
Compatibility:
Compatible with models including but not limited to:
Samsung: WA400PJHDWR/AA-01, WA400PJHDWR/AA-02, WA400PJHDWR/AA-03, WA422PRHDWR/AA-00, WA422PRHDWR/AA-01, WA422PRHDWR/AA-02, WA45H7000AW/A2, WA45M7050AW/A4
Other brands: Select models requiring DC97-16350C
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung top-load washers requiring DC97-16350C.
🔥 Specifications: Replacement suspension rod and spring assembly, approximately 25.6" long, designed to absorb shock and reduce vibration.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 10–15 minutes per rod.
🛡️ Effective Fixes: Resolves excessive shaking, off-balance drums, noise, or "DC" error codes.
Product Specification
Part Number: XPDC97-16350C
Component Type: Washer suspension support rod and spring assembly
Material: Durable ABS plastic and metal with high-tension spring
Dimensions: Approximately 25.6" L (rod and spring assembly)
Operating Conditions: Suitable for high-vibration washer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source before installation.
Tools Needed: Phillips screwdriver, work gloves, optional pliers.
Process: Access the washer tub, remove the old suspension rod, and install the new one, ensuring secure attachment to the tub and base.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
ERP DC97-16350C Washer Suspension Support Rod - Compatible with Samsung Washers
Product Description
Stabilize your washer with the replacement DC97-16350C Washer Suspension Support Rod. This replacement suspension rod and spring assembly is designed for select Samsung top-load washers, supporting the washer tub to minimize vibration and noise during operation. It addresses issues like excessive shaking, off-balance drums, or "DC" error codes, offering a cost-effective alternative to OEM parts.
Note: Includes one suspension rod and spring assembly (approximately 25.6" long). Sold individually; recommend replacing all four rods for optimal performance. Disconnect power before installation. Verify compatibility with your washer model.
Replaces part numbers: DC97-16350C, DC97-16350J, 3282689, DC97-05280K, PD00007282, EAP4221572, AP5623264, PS4221572.
Compatibility:
Compatible with models including but not limited to:
Samsung: WA400PJHDWR/AA-01, WA400PJHDWR/AA-02, WA400PJHDWR/AA-03, WA422PRHDWR/AA-00, WA422PRHDWR/AA-01, WA422PRHDWR/AA-02, WA45H7000AW/A2, WA45M7050AW/A4
Other brands: Select models requiring DC97-16350C
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung top-load washers requiring DC97-16350C.
🔥 Specifications: Replacement suspension rod and spring assembly, approximately 25.6" long, designed to absorb shock and reduce vibration.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 10–15 minutes per rod.
🛡️ Effective Fixes: Resolves excessive shaking, off-balance drums, noise, or "DC" error codes.
Product Specification
Part Number: DC97-16350C
Component Type: Washer suspension support rod and spring assembly
Material: Durable ABS plastic and metal with high-tension spring
Dimensions: Approximately 25.6" L (rod and spring assembly)
Operating Conditions: Suitable for high-vibration washer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source before installation.
Tools Needed: Phillips screwdriver, work gloves, optional pliers.
Process: Access the washer tub, remove the old suspension rod, and install the new one, ensuring secure attachment to the tub and base.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
DC66-00470BCM Washer Rear Shock Absorber
Replaces Part Numbers: DC66-00470B, 2072308, DC66-00650C, AP4456255, OEM13368770, PS4212220.
Description: This Washer Rear Shock Absorber is designed to provide essential dampening for your specific Samsung washer models, ensuring smooth and stable operation during each cycle. This crucial component effectively minimizes vibrations and reduces noise, enhancing the overall performance and lifespan of your washing machine.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO WH01X27538 Washer Drive Belt
The XPARTCO WH01X27538 is an aftermarket replacement washer drive belt for GE and Hotpoint top-load washers. It is a 5-rib belt with 4 grooves, approximately 22.87 inches long. The belt connects the drive motor to the transmission pulley, so the motor can spin the basket and agitate the clothes. A worn, stretched, or broken belt can cause a washer that won't spin or agitate, a slow spin, squealing, or noise during the cycle.
This is a direct-fit aftermarket replacement for the original GE belt. Belts differ between washer families, so check the part number against your model before ordering.
Quick Answer
The XPARTCO WH01X27538 Drive Belt fixes a GE or Hotpoint top-load washer that won't spin or agitate, spins slowly, or squeals or makes noise because the drive belt is worn or broken. Classic symptom: the motor runs, but the basket or agitator doesn't turn.
Common Problems This Part Fixes
Motor runs but the basket or agitator doesn't turn
Washer won't spin or agitate
Slow spin or poor wash performance
Squealing or noise during the cycle
Visibly worn, cracked, stretched, or broken belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drive belt directly replaces the following part number:
WH01X27538, 290D1101P005, 4587903, AGE25699, AP6328256, OEM18984777, PD00043350, PS12299369
Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This drive belt is listed for GE and Hotpoint top-load washers, including these examples:
GE GTW220ACK4WW, GTW220ACK5WW, GTW330ASK4WW, GTW335ASN1WW
GE GTW460ASJ8WW, GTW460ASJ9WW, GTW460ASJAWW
Hotpoint HTW200ASK3WW, HTW240ASK5WS, HTW240ASK6WS
Note: The models above are a small sample, not a full list. Washer belts differ between families, so compare your old belt to this one (approximately 22.87 inches, 5 ribs) and check your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket drive belt for GE and Hotpoint top-load washers
5-rib, 4-groove design, approximately 22.87 inches long
Connects the drive motor to the transmission pulley
Resolves no-spin, no-agitate, and noise problems caused by a worn belt
Typically a 30 minute to 1 hour repair
Product Specifications
Part Number
XPWH01X27538
OEM Part Number
WH01X27538
Part Type
Washer Drive Belt
Condition
Aftermarket Replacement
Belt Length
Approx. 22.87 Inches
Belt Profile
5-Rib, 4-Groove
Application
GE & Hotpoint Top-Load Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before beginning, and wear work gloves to protect your hands. Access to the belt depends on your model, so follow its service guide to reach the motor and pulleys. Note how the old belt is routed, remove it, and fit the new belt on the same pulleys. Check that it is seated in the pulley grooves before reassembling.
Frequently Asked Questions
My washer motor runs but the basket won't turn. Is this the part I need?
A broken or slipping drive belt is a common cause. If the belt looks worn, cracked, or loose, replacing it is a good first step.
How long is this belt?
It is approximately 22.87 inches long, with 5 ribs and 4 grooves. If your old belt is a very different length or has a different number of ribs, check your model number before ordering.
Is this a top-load or front-load part?
It is listed for GE and Hotpoint top-load washers. If you are unsure which belt your washer uses, check your model number or contact our support team.
Is this an easy repair?
Retailers list it at roughly 30 minutes to 1 hour, though it depends on your model. Follow your model's service guide to reach the motor and pulleys.
Will this fit my washer?
It is listed for many GE and Hotpoint washers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10599356 Washer Water Valve
The XPARTCO W10599356 is an aftermarket replacement water inlet valve for Whirlpool-built front-load washers, including full-size and compact models. This valve sits at the back of the washer where the hot and cold water supply hoses connect, and it's the gatekeeper for every drop of water that enters the drum. When the control calls for water, it energizes the valve's solenoid coils to open the hot side, the cold side, or both together, and closes them again once the correct fill level is reached. A valve that won't open leaves you with no fill at all; a valve that won't fully close can let water trickle or flow into the drum even when the cycle isn't calling for it.
Over time, mineral deposits and sediment from the water supply can build up inside the valve body and prevent it from sealing fully, the internal solenoid coil can burn out electrically, and the rubber diaphragm or seal inside can simply wear out with age. A failing valve on this platform commonly triggers an F8 E1 or similar fill-related error code, since the control expects water to reach the correct level within a set time and flags it when that doesn't happen. It directly replaces AP5692067, 3023192, PS8689091, and W10509710.
Quick Answer
The XPARTCO W10599356 Washer Water Valve fixes Whirlpool-built front-load washers that won't fill, fill slowly, overfill, leak water into the drum when the cycle isn't running, or throw an F8 E1 or similar fill-related error code. Solenoid-actuated water inlet valve for the hot and cold supply connections. Replaces AP5692067, 3023192, PS8689091, W10509710. Consider replacing the fill hoses at the same time — they wear on a similar schedule and share the same access point.
Common Problems This Part Fixes
Washer won't fill with water at the start of the cycle
Washer fills much more slowly than normal
Washer overfills or takes on more water than the cycle calls for
Water trickling or leaking into the drum when the washer is off or between cycles
F8 E1 or similar fill-related error code displayed on the control panel
Cycle stalling at the fill step and never advancing to wash
No hot water, no cold water, or neither reaching the drum
Water pooling underneath or behind the washer near the supply connections
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
W10599356, W10509710, AP5692067, 3023192, 33090084, C-022/16-B21, EAP8689091, AWP41165, PD00022876, PS8689091
W10509710 was the immediately preceding number that Whirlpool revised to W10599356. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select Whirlpool-built front-load washers across the Whirlpool family of brands, including:
Whirlpool front-load washers — WFW series
Maytag front-load washers — MHW series (select Whirlpool-built models)
KitchenAid, Jenn-Air, and Amana front-load washers (select models)
Magic Chef, Admiral, and Norge front-load washers (select models)
Roper and Kenmore front-load washers (select Whirlpool-built models)
Verified model numbers include: WFW70HEBW0, WFW70HEBW1, WFW70HEBW2, WFW72HEDW0, WFW7590FW0, WFW75HEFW0, WFW80HEBC0, WFW80HEBC1, WFW80HEBC2, WFW80HEBW0, WFW80HEBW1, WFW80HEBW2, WFW81HEDW0, MHW3000BG0, MHW3000BG1, MHW3000BG2, MHW3000BW0, MHW3000BW1, MHW3000BW2, MHW3100DW0, MHW4000BW1, MHW4000BW2, MHW4100DW0, MHW5100DC0, MHW5100DW0, NFW5700BW0, NFW5700BW1, NFW5800DW0, 7MWFW72HEDW0, 7MWFW80HEBW0, and 7MWFW81HEDW0.
Note: This valve fits Whirlpool's front-load washer platform. It is not intended for top-load washers, which use a different valve design and mounting configuration. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement solenoid-actuated water inlet valve for hot and cold supply connections
Resolves "won't fill," "fills slowly," "overfills," and "leaking into the drum" symptoms caused by valve failure
Commonly resolves F8 E1 and similar fill-related error codes
Direct drop-in replacement for the superseded W10509710 valve
Replaces AP5692067, 3023192, PS8689091, and W10509710
Compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair — typically completed in 30 to 60 minutes
Product Specifications
Part Number
W10599356
OEM Part Number
W10599356 (formerly W10509710)
Part Type
Washer Water Inlet Valve
Condition
Aftermarket Replacement
Application
Front-Load Washers (Whirlpool-Built)
Actuation
Solenoid-operated
Connections
Hot and cold water supply inlets
Supersedes
W10509710
Repair Difficulty
Easy to Moderate — 30 to 60 minutes
Quantity
1 valve
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Have A Towel Ready Unplug the washer or shut off its circuit breaker, and shut off both the hot and cold water supply valves before beginning. Wear work gloves. Disconnect the hot and cold water supply lines from the back of the valve first — have a towel or shallow pan ready, since residual water will spill out. Use a 1/4" nut driver or socket to remove the rear screws securing the top panel, then slide the panel back and lift it off to access the valve from inside the cabinet. Photograph the wiring connections before disconnecting anything. Disconnect the electrical connector from the old valve, remove the mounting screw or bracket (often a T-20 Torx screw), and pull the valve free from its mounting position. Install the new W10599356 in the same orientation, secure the mounting screw, and reconnect the electrical connector fully. Reattach the hot and cold water supply lines to the correct ports, tightening securely by hand plus a partial turn with pliers. Reinstall the top panel, restore the water supply, and check every connection you touched for leaks before restoring power. Run a short cycle and confirm the tub fills at the normal rate with no leaking underneath or behind the washer. While everything is accessible, consider replacing the fill hoses as well, since they wear on a similar schedule. Tools needed: 1/4" nut driver or socket, T-20 Torx bit, pliers, towel or shallow pan, work gloves.
Frequently Asked Questions
My washer shows an F8 E1 error. Does that mean the valve is definitely bad?
It's a strong indicator, but check the basics first. F8 E1 and similar fill-related codes generally mean the control didn't see water reach the expected level within its allotted fill time. Before replacing the valve, confirm both hot and cold supply valves at the wall are fully open, check the inlet screens inside the valve ports for sediment or debris, and make sure the fill hoses aren't kinked. If those check out and the washer still won't fill properly, the inlet valve itself is the likely cause.
Water keeps trickling into the drum even when the washer is off. Is that the valve?
Yes, this is one of the classic symptoms of a valve that isn't sealing fully closed. Mineral deposits, sediment, or a worn internal diaphragm can prevent the valve from shutting off completely, letting a slow trickle of water continue into the drum between cycles. This can eventually lead to an overfill or water pooling at the front of the washer, so it's worth addressing promptly rather than waiting.
Only hot or only cold water isn't coming in. Do I need to replace the whole valve?
Usually yes. Most washer inlet valves use two separate solenoid coils in one housing — one for hot, one for cold — but they're not typically sold as separately replaceable coils. If just one side has stopped working while the other functions normally, that still points to a failure inside this valve assembly, and replacing the complete unit is the standard repair.
Should I replace the fill hoses while I'm in there?
It's a good idea. The fill hoses connect right at the same point you'll already have exposed, wear on a similar timeline as the valve, and are a common source of slow leaks that get blamed on the valve. Since you're already accessing this area, replacing hoses that show any cracking, bulging, or stiffness saves you from repeating the disassembly later.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the solenoid design, flow rate, and mounting configuration of the original W10599356 / W10509710 valve used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine Refrigerator Replacement Part
DA97-14992A Refrigerator Genuine Auto-Close Lever
Genuine auto-close lever for select refrigerator door hinge and closure systems.
Product Overview
The DA97-14992A Refrigerator Auto-Close Lever is a genuine replacement part designed for compatible refrigerators. The lever works with the door hinge and closure mechanism to help guide the refrigerator door into the proper closed position.
Use this part when the original lever is cracked, worn, broken, loose, or no longer helping the door close correctly.
Quick Answer
DA97-14992A is a genuine refrigerator auto-close lever for compatible door closure assemblies. Replace it when the original lever is damaged or the door no longer closes and aligns as intended.
Common Problems This Part May Fix
Refrigerator door does not close smoothly
Door does not pull fully into the closed position
Auto-close action is weak or inconsistent
Lever is cracked, broken, or worn
Door alignment changes near the closed position
Replaces and Cross-References
DA97-14992A, 3974211, AP5915404, ASM138875, EAP9604575, PD00039402, PS9604575
Part number is provided for identification. This listing is for a genuine replacement part.
Compatibility
Fits select refrigerators that specify auto-close lever part number DA97-14992A.
Important: Verify the complete refrigerator model number, door position, and original lever part number before ordering. Similar-looking hinge and closure components may differ by model or door side.
Key Features
Genuine replacement part
Designed for compatible refrigerator door closure systems
Helps guide the door into the closed position
Supports proper door alignment near closing
Direct replacement for applications calling for DA97-14992A
Product Specifications
Part Number
DA97-14992A
Part Type
Refrigerator Auto-Close Lever
Application
Compatible Refrigerator Door Systems
Function
Assists door closing and alignment
Condition
New
Part Quality
Genuine Replacement Part
Package Quantity
1 Auto-Close Lever
Installation & Troubleshooting Notes
Disconnect refrigerator power before service.
Support the door if hinge or closure hardware must be loosened or removed.
Inspect the original auto-close lever for cracks, wear, deformation, or looseness.
Check nearby hinge and closure components for related wear or damage.
Install the replacement lever in the same position and orientation as the original.
Confirm the door opens, aligns, and closes smoothly before returning the refrigerator to normal use.
Diagnostic tip: A door that does not close correctly may also have worn hinges, loose mounting hardware, cabinet leveling issues, or gasket interference. Inspect the full door system before replacing only the lever.
Frequently Asked Questions
What does DA97-14992A do?
It works with the refrigerator door closure system to help guide the door into the proper closed position.
Is DA97-14992A a genuine part?
Yes. This listing is for a genuine refrigerator auto-close lever.
When should this lever be replaced?
Replace it if it is cracked, broken, excessively worn, loose, or no longer supporting proper door closing.
Will this fit every refrigerator?
No. Match the complete refrigerator model number, door position, and original part number before ordering.
Shop With Confidence
Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether DA97-14992A is correct for your appliance.
Genuine ReplacementDoor Closure PartModel Fitment SupportFast U.S. Shipping
WH1X2727 Washer Genuine Damping Strap
Replaces Part Numbers: WH1X2727, 2289, WH01X10028, WH01X10046, WH01X2727, WH1X10028, WH1X10046, AH271100, EA271100, AP2044899, PS271100.
Description: This Washer Tub Dampening Strap is a Genuine OEM part for select GE washing machine models. It plays a vital role in reducing vibrations and absorbing shocks during the wash cycle to provide stability and minimize excessive movement. Common causes of a bad dampening strap can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the strap, or damage due to impact or mishandling.
