Genuine GE OEM Dryer Part
GE WE12X10014 Dryer Genuine OEM Drum Belt
87-inch, 4-rib drum drive belt for select GE, Hotpoint, RCA and Kenmore dryers.
Product Overview
The GE WE12X10014 Dryer Genuine OEM Drum Belt connects the dryer motor pulley to the drum so the drum can rotate during the drying cycle.
This genuine GE replacement belt is designed for compatible GE, Hotpoint, RCA, and select Kenmore dryers that use the common 87-inch, 4-rib drive belt.
Quick Answer
WE12X10014 is an approximately 87 inch long × 1/4 inch wide dryer belt with 4 ribs/ridges. It replaces several earlier GE belt numbers including WE12X42 and WE12X82.
Common Problems This Part May Fix
Dryer drum does not turn
Motor runs but drum stays still
Belt is broken, stretched, glazed, or frayed
Squealing or slapping noise from a damaged belt
Dryer will not tumble properly
Replaces and Cross-References
WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043
Cross-reference numbers are provided for identification. This listing is for Genuine GE OEM part WE12X10014.
Compatibility
Fits select GE, Hotpoint, RCA and Kenmore dryers. Compatible model examples include:
DCLR333ET0WW
DBLR333ET0WW
DBLR333GT0WW
NVLR333ET0WB
NVLR333GT0WB
DVLR223ET0WW
DDE7200SBLWW
DDE7500GAL
DLB3400SBLWH
DWLR473ET0WW
NLLR113ET1WO
DDG7688MCL
Important: This is only a partial compatibility list. Verify the complete dryer model number and original belt part number before ordering.
Key Features
Genuine GE OEM replacement part
Approx. 87 inches long
Approx. 1/4 inch wide
4-rib / 4-ridge drive surface
Transfers motor power to dryer drum
Fits many GE-built dryer platforms
Product Specifications
Manufacturer Part Number
WE12X10014
Brand
GE Genuine OEM
Part Type
Dryer Drum Drive Belt
Length
Approx. 87 in.
Width
Approx. 1/4 in.
Ribs / Ridges
4
Condition
New
Part Quality
Genuine OEM
Package Quantity
1 Belt
Installation Notes
Unplug the dryer before service.
Access the drum and release belt tension from the idler pulley.
Remove the old belt and inspect the idler pulley and motor pulley for wear or debris.
Install the new belt with the ribbed side against the drum where specified by the dryer design.
Route the belt around the motor pulley and idler exactly as shown in the appliance service diagram.
Rotate the drum by hand to confirm smooth tracking before reassembly.
Diagnostic tip: A broken belt can result from a seized idler pulley, worn drum bearing/glides, or an obstructed drum. Inspect related components before installing the new belt.
Frequently Asked Questions
How long is WE12X10014?
It is approximately 87 inches long and 1/4 inch wide.
How many ribs does this belt have?
It has 4 ribs/ridges on the drive surface.
Does it replace WE12X42 and WE12X82?
Yes. WE12X10014 is commonly listed as the replacement for those earlier belt numbers.
Is this a Genuine GE OEM belt?
Yes. This listing is for Genuine GE OEM part WE12X10014.
Shop With Confidence
Verify the complete dryer model number before ordering. Our compatibility team can help confirm whether Genuine GE OEM WE12X10014 is correct for your dryer.
Genuine GE OEM87 Inch Belt4-Rib DesignCompatibility Support
XPARTCO W10721967 Washer Drive Clutch Kit
The XPARTCO W10721967 is an aftermarket replacement drive clutch kit — often called a "splutch" kit — for Whirlpool-built top-load washers. This assembly sits at the base of the transmission and works together with the mode shift actuator to control how power reaches the washer: during agitation, the clutch engages to drive the washplate back and forth, and during spin, it locks up to spin the inner wash basket at full speed. The name "splutch" comes from what it actually is — part spring, part clutch — and that spring-loaded design is what lets the same assembly smoothly transition between the gentle agitate motion and the much more forceful spin cycle.
This is a complete 6-piece kit: spring, clutch housing, cam ring, basket drive gear, drive pulley, and mounting nut, so you're replacing the entire wear-prone assembly at once rather than chasing individual worn components. Over time the clutch's friction surfaces glaze over and wear down, the cam ring's engagement points round off, and the spring loses tension — all of which produce the same telltale complaint: a loud grinding, clicking, or clunking noise during agitation or spin, sometimes alongside a washer that spins weakly, agitates but won't spin, or runs hot and starts to smell from the friction of a slipping clutch. It directly replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, and PS10057144.
Quick Answer
The XPARTCO W10721967 Washer Drive Clutch Kit fixes Whirlpool-built top-load washers with loud grinding, clicking, or clunking noise during agitation or spin, a washer that agitates but won't spin, weak or no spin, an overheating smell, or a drum that doesn't spin the pump properly. Complete 6-piece "splutch" kit — spring, housing, cam ring, basket drive gear, pulley, and nut. Replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, PS10057144. Often replaced together with the drive belt, since both wear on a similar schedule and share the same teardown.
Common Problems This Part Fixes
Loud grinding, clicking, or clunking noise during agitation or spin
Washer agitates normally but won't spin, or spins very weakly
Drive pump doesn't rotate properly, leading to slow or incomplete draining
Washer stops agitating partway through a cycle
Washer running unusually hot, sometimes with a burning or odd odor
Loud noise specifically when transitioning between agitate and spin
Clothes coming out excessively wet because the spin cycle isn't reaching full speed
Rattling or looseness felt at the drive pulley when the basket is turned by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive clutch kit directly replaces the following OEM and cross-reference part numbers:
W10721967, W10721967VP, AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10818965, W11396423, 3319979, PS10057144, EAP10057144, AWP40988, PD00005593.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive clutch kit is compatible with select Whirlpool-built top-load washers across the Whirlpool family of brands, including:
Whirlpool top-load washers — WTW series
Maytag top-load washers — MVWC series (select Whirlpool-built models)
Kenmore top-load washers — KATW and NTW series (select Whirlpool-built models)
Amana top-load washers (select models)
Crosley top-load washers (select models)
Roper top-load washers (select models)
Inglis top-load washers (select models)
Verified model numbers include: 1CWTW4705GW0, 1CWTW4705GW1, 1CWTW4705GW2, 1CWTW4815EW0, 1CWTW4815EW1, 1CWTW4815EW2, 1CWTW4815EW3, 1CWTW4840YW2, 1CWTW4845EW0, 1CWTW4845EW1, 1CWTW4845EW2, 1CWTW4845EW3, 2DWTW4740YQ1, 4GWTW1805LW0, 4GWTW1805LW1, 4GWTW1955LW0, 4GWTW1955LW1, 4GWTW3000FW0, 4GWTW3000FW1, 4GWTW4740YQ3, 4GWTW4800YQ3, 4KATW5215FW0, 4KATW5415FW0, 4KMVWC215FW0, 4KMVWC315FW0, 4KMVWC410JW0, 4KMVWC415FW0, 4KMVWC420JW0, 4KMVWC425FW0, 4KMVWC430JW0, 4KMVWC440JW0, 4KNTW3100JW0, 4KNTW3200JW0, 4KNTW3300JW0, 7MWGT4027HW1, WTW5000DW1, and MVWX655DW1.
Note: This kit fits Whirlpool's belt-drive top-load washer platform specifically. It is not intended for direct-drive designs that don't use a separate clutch and belt system. Because this drive clutch kit fits an extremely broad range of model years and revisions, always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Complete 6-piece "splutch" kit — spring, clutch housing, cam ring, basket drive gear, drive pulley, and mounting nut
Works together with the mode shift actuator to engage agitation and lock up for full-speed spin
Resolves "grinding or clicking noise," "won't spin," "agitates but won't spin," and "overheating smell" symptoms caused by clutch wear
Replaces the entire wear-prone assembly at once rather than individual components
Direct drop-in replacement for the washer transmission's drive pulley and clutch assembly
Replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, and PS10057144
Compatible with a wide range of Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, and Inglis top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10721967
OEM Part Number
W10721967 / AP5951296
Part Type
Washer Drive Clutch Kit ("Splutch")
Condition
Aftermarket Replacement
Application
Whirlpool-Built Belt-Drive Top-Load Washers
Kit Contents
Spring, clutch housing, cam ring, basket drive gear, drive pulley, mounting nut
Function
Engages agitation and locks up for full-speed spin
Repair Difficulty
Moderate — 30-45 minutes
Quantity
1 clutch kit (6 pieces)
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, Inglis
Installation Notes
⚠️ Unplug Washer And Shut Off Water Before Starting — Tip Onto Its Back Or Front With Care Disconnect power at the outlet or shut off the circuit breaker, and close the water supply valves before beginning. Wear work gloves. Access is from underneath the washer: remove the inner wash basket first (this typically requires a large basket-hub or spanner tool and applying steady upward pressure to break the basket free from the drive hub), then carefully tip the washer onto its back or front, protecting the top and any control panel with a blanket or padding as you lay it down. Photograph the belt and pulley arrangement before disconnecting anything. Remove the drive belt from the motor pulley, then remove the mounting nut and pull the old clutch/pulley assembly off the transmission shaft — a puller tool can help if it's seized. Install the new W10721967 assembly onto the shaft in the same orientation, torque the mounting nut to the manufacturer's specification, and reinstall the drive belt, checking that it seats correctly in the pulley grooves. Carefully stand the washer back upright, reinstall the wash basket, and reconnect it to the drive hub. Restore water and power, then run a full test cycle through agitate and spin, listening for the grinding or clicking noise that prompted the repair. Tools needed: basket-hub removal tool or spanner wrench, socket set, 13mm socket, 5/16" nut driver, pliers, work gloves, and a helper to assist with tipping the washer.
Frequently Asked Questions
What does "splutch" mean, and why is it sold as one kit instead of individual parts?
"Splutch" is shorthand for spring-clutch — the assembly combines a spring-loaded clutch mechanism with the drive pulley and gear that together control agitation and spin. Whirlpool sells this as a single kit because the individual components wear together and interact closely; replacing just the pulley while leaving a worn cam ring or a fatigued spring in place often means the noise or slipping symptom returns quickly. Replacing the complete kit resolves the failure at its actual source.
My washer agitates fine but won't spin. Is this the clutch?
It's one of the most common causes of exactly that symptom. The clutch has to lock up firmly to transfer full power into spinning the basket; if its friction surfaces have worn down or glazed over, it can still engage well enough for the lighter agitation motion but slip under the higher torque demand of spin. If you hear grinding or clicking specifically as the washer transitions into spin, that reinforces the clutch as the likely cause.
Should I replace the drive belt at the same time?
It's worth strongly considering. The belt and clutch wear on a similar schedule and share the same teardown — you're already tipping the washer over and removing the belt to access the clutch, so replacing a belt that's showing wear at the same time saves you from repeating the whole disassembly again in the near future. Inspect the belt for glazing, cracking, or fraying while it's off and replace it if it shows any of those signs.
The washer smells hot or burnt. Is that dangerous, and does it point to this part?
A worn clutch that's slipping generates friction heat, which can produce a warm, slightly burnt smell — this is a real symptom of clutch wear and not something to ignore, since continued operation in that state accelerates wear on the clutch and can stress the drive motor. If you notice this smell along with weak or absent spin, stop using the washer and address the clutch before running further loads.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the spring tension, cam ring engagement geometry, pulley dimensions, and mounting configuration of the original W10721967 clutch kit used in compatible Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, and Inglis top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
2 Pack - 12638000004021 Genuine OEM Midea Dryer Drum Roller
The 12638000004021 is a genuine Midea OEM dryer drum support roller, sold under the Frigidaire/Midea manufacturing relationship for Midea-built dryers and select Frigidaire, Insignia, and Kenmore dryers using this same platform. This roller sits underneath the drum, along its rear support track, and does the physical work of holding the drum's weight while letting it turn freely as the belt drives it around. A dryer typically uses more than one of these rollers working together to keep the drum properly supported and centered.
Over time, the wheel and bearing inside the roller wear down from the constant heat and rotation the dryer subjects them to, eventually developing a flat spot, seizing up, or simply wearing thin enough that the drum sits unevenly. A worn roller produces a distinctive symptom: a rumbling, squeaking, or thumping noise that rises and falls with drum rotation, often getting louder as a load tumbles. It directly replaces 5304511415, AP7990985.
Quick Answer
The 12638000004021 Genuine OEM Midea Dryer Drum Roller fixes Midea-built dryers (and select Frigidaire, Insignia, and Kenmore dryers on this platform) with a rumbling, squeaking, or thumping noise that rises and falls with drum rotation. Supports and centers the drum on its rear track. Replaces 5304511415, AP7990985.
Common Problems This Part Fixes
Rumbling or grinding noise that rises and falls with drum rotation
Squeaking or squealing noise from inside the dryer during operation
Thumping or knocking noise, especially with a heavier load
Noise that gets louder over time as the roller wears further
Drum that sits unevenly or wobbles slightly when turned by hand
Visible flat spot, cracking, or wear on the roller wheel
Noise that continues even with an empty drum tumbling
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum roller directly replaces the following OEM and cross-reference part numbers:
12638000004021, AP7990985, PS18170578, 5304511415, 4056012471, AP8049485, PS17993389.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select Midea-built dryers, and also fits select Frigidaire, Insignia, and select Kenmore dryers built on the same Midea platform.
Note: Always verify your full model number before ordering, since Midea and its partner brands use several different roller designs across their dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Midea OEM part — factory-specified wheel and bearing design
Supports the drum along its rear track, allowing smooth rotation as the belt drives it
Resolves "rumbling," "squeaking," and "thumping" noise symptoms caused by roller wear
Direct drop-in replacement for the original roller and axle assembly
Replaces 5304511415, AP7990985.
Compatible with Midea, Frigidaire, Insignia, and select Kenmore dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
12638000004021
Part Type
Dryer Drum Support Roller
Condition
Genuine OEM
Brand
Midea
Location
Rear drum support track
Function
Supports and centers the drum during rotation
Quantity
1 roller
Compatible Brands
Midea, Frigidaire, Insignia, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Access is typically through the rear panel: remove the screws securing the panel, then release the drum belt from the idler pulley to relieve tension so the drum can be supported and moved slightly for access to the rollers underneath. Photograph the roller and axle positions before removing anything. Remove the retaining clip or fastener holding the worn roller's axle in place, then slide the old roller off. Install the new 12638000004021 roller onto the axle in the same orientation, and secure it with the retaining clip or fastener. While you're in there, check the other rollers by spinning each one by hand — if any feel stiff, gritty, or worn, replace them at the same time, since they're typically the same age and wear on a similar schedule. Re-tension the belt around the idler pulley, reassemble the rear panel, restore power, and run a short empty cycle to confirm the noise has resolved. Tools needed: Phillips screwdriver, nut driver, pliers, work gloves.
Frequently Asked Questions
My dryer makes a rumbling noise that gets louder over time. Is this the part I need?
Yes, this is the classic symptom of a worn drum roller. As the wheel and bearing wear down, the noise typically starts subtle and gradually worsens, often becoming most noticeable with a full load as the extra weight puts more load on the worn wheel. If the noise rises and falls in rhythm with the drum turning, a roller is the most likely cause.
Should I replace just one roller, or all of them?
It's worth checking all of them while you have access. Dryers typically use more than one roller supporting the drum, and since they're the same age and under the same stress, if one has worn out the others are often not far behind. Spin each roller by hand — if any feel stiff, gritty, or rough, replace them together to avoid repeating this repair again soon.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Midea to factory specifications — guaranteed fit, materials, and performance. It matches the original wheel design, bearing, and axle fitment of the drum roller originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WP697772 Dryer Blower Wheel
The WP697772 is a genuine OEM blower wheel from Whirlpool for Whirlpool-built dryers and washer-dryer combos sold under the Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral names. The blower wheel attaches to the drive motor shaft and moves air over the heat source, through the drum, and out the exhaust vent. When the wheel wears, cracks, loses a fin, or comes loose on the shaft, the dryer gets noisy and airflow drops, so clothes take longer to dry.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and balance match the original. If your dryer is only noisy, check the blower for lint buildup first, since a clogged wheel can sound like a failing one.
Quick Answer
The Genuine OEM WP697772 Blower Wheel fixes a Whirlpool-built dryer that is noisy, has weak airflow, or takes too long to dry because the blower wheel is worn, cracked, or damaged. Genuine OEM from Whirlpool. Classic symptom: a rattling, thumping, or squealing noise from the back of the dryer, with damp clothes at the end of a normal cycle.
Common Problems This Part Fixes
Dryer noisy, with rattling or thumping from the blower area
Weak airflow, or clothes taking too long to dry
Visibly cracked, chipped, or broken blower fins
Blower wheel loose or slipping on the motor shaft
Wheel worn out over time
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This blower wheel replaces the following part numbers:
WP697772, WPW10211915, 697772, W10211915, 687613, AP6010627, AWP48289,EAP11743811, FIX11743811, OEM18031890, PD00003053, PS11743811
These are Whirlpool's un-prefixed and earlier numbers for this blower wheel. If your old wheel or parts diagram shows any of them, match against this list.
Compatibility
This blower wheel is listed for dryers and washer-dryer combos from:
Whirlpool, including CEE2760KQ0, WED9470WW1, and WED9400ST1
Kenmore, including 11060052990, 11060056990, and 10687884100
Maytag, including YMEDX700XL0 and MGDX700AG0
KitchenAid, Amana, Crosley, Inglis, and Admiral
Note: The model list above is only a sample, since this wheel fits many more models. Confirm fit by matching the number on your old wheel or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM Whirlpool blower wheel, not an aftermarket equivalent
Restores quiet, full airflow through the drum and exhaust
Fits select Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral dryers and combos
Straightforward replacement, typically 15–60 minutes with hand tools
Product Specifications
Part Number
WP697772
OEM Part Number
WP697772
Part Type
Dryer Blower Wheel
Condition
Genuine OEM
Manufacturer
Whirlpool
Application
Select Whirlpool-Family Dryers & Washer-Dryer Combos
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker, and shut off the gas supply first if it's a gas model. Wear work gloves. Following your model's service guide, remove the front cover to reach the blower housing, then the back cover to access the motor shaft. Hold the motor shaft steady while you unscrew the retaining nut and pull off the old wheel. Reviewers report that the nut is left-hand threaded on these dryers, so check the thread direction before forcing it. Thread the new wheel on while holding the shaft, tighten it, and replace the covers. Clean the blower housing and exhaust duct of lint while you have the dryer open, and inspect the new wheel on arrival for damage.
Frequently Asked Questions
My dryer is noisy. Is this the part I need?
Possibly. Before replacing the wheel, check whether it is clogged with lint, which can cause noise and imbalance. If the wheel is clean but cracked, chipped, or loose on the shaft, replace it. Also check the drum rollers and idler pulley, which can make similar sounds.
Is the nut on the shaft left-hand threaded?
Reviewers report that it is on these dryers, so turn it the opposite way to a normal nut when removing the old wheel. Check on your dryer before applying force.
My old wheel is marked 697772 or W10211915. Will this work?
Yes. Both numbers are on the Replaces list. If you're unsure, contact our support team with your model number and we'll confirm.
Is this a genuine Whirlpool part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
12638000000786 Genuine OEM Midea Dryer Drum Roller
The 12638000000786 is a genuine Midea OEM dryer drum support roller. This roller sits underneath the drum, along its support track, and does the physical work of holding the drum's weight while letting it turn freely as the belt drives it around. A dryer typically uses more than one of these rollers working together to keep the drum properly supported and centered.
Over time, the wheel and bearing inside the roller wear down from the constant heat and rotation the dryer subjects them to, eventually developing a flat spot, seizing up, or simply wearing thin enough that the drum sits unevenly. A worn roller produces a distinctive symptom: a rumbling, squeaking, or thumping noise that rises and falls with drum rotation, often getting louder as a load tumbles or as the roller continues to wear.
Quick Answer
The 12638000000786 Genuine OEM Midea Dryer Drum Roller fixes Midea-built dryers with a rumbling, squeaking, or thumping noise that rises and falls with drum rotation. Supports and centers the drum along its support track.
Common Problems This Part Fixes
Rumbling or grinding noise that rises and falls with drum rotation
Squeaking or squealing noise from inside the dryer during operation
Thumping or knocking noise, especially with a heavier load
Noise that gets louder over time as the roller wears further
Drum that sits unevenly or wobbles slightly when turned by hand
Visible flat spot, cracking, or wear on the roller wheel
Noise that continues even with an empty drum tumbling
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
12638000000786, AP7155087, PS18170572
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. This is a distinct part number from our 12638000004021 drum roller listing — the two are not interchangeable and do not cross-reference each other. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This drum roller is compatible with select Midea-built dryers.
Note: A specific verified compatible model list was not available at the time this page was built. Midea uses several different roller designs across its dryer lineup, and this part number is distinct from our 12638000004021 listing. Always verify your full model number before ordering. Contact our support team with your model number and we will confirm fitment before you purchase.
Key Features
Genuine Midea OEM part — factory-specified wheel and bearing design
Supports the drum along its support track, allowing smooth rotation as the belt drives it
Resolves "rumbling," "squeaking," and "thumping" noise symptoms caused by roller wear
Direct drop-in replacement for the original roller and axle assembly
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
12638000000786
Part Type
Dryer Drum Support Roller
Condition
Genuine OEM
Brand
Midea
Location
Drum support track
Function
Supports and centers the drum during rotation
Quantity
1 roller
Compatible Brand
Midea
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Access is typically through the rear panel: remove the screws securing the panel, then release the drum belt from the idler pulley to relieve tension so the drum can be supported and moved slightly for access to the rollers underneath. Photograph the roller and axle positions before removing anything. Remove the retaining clip or fastener holding the worn roller's axle in place, then slide the old roller off. Install the new 12638000000786 roller onto the axle in the same orientation, and secure it with the retaining clip or fastener. While you're in there, check the other rollers by spinning each one by hand — if any feel stiff, gritty, or worn, replace them at the same time, since they're typically the same age and wear on a similar schedule. Re-tension the belt around the idler pulley, reassemble the rear panel, restore power, and run a short empty cycle to confirm the noise has resolved. Tools needed: Phillips screwdriver, nut driver, pliers, work gloves.
Frequently Asked Questions
My dryer makes a rumbling noise that gets louder over time. Is this the part I need?
Yes, this is the classic symptom of a worn drum roller. As the wheel and bearing wear down, the noise typically starts subtle and gradually worsens, often becoming most noticeable with a full load as the extra weight puts more load on the worn wheel. If the noise rises and falls in rhythm with the drum turning, a roller is the most likely cause.
Is this the same roller as your 12638000004021 listing?
No. These are two distinct Midea part numbers, and they do not cross-reference or replace each other. If you're not sure which roller your dryer uses, check the number stamped on your existing roller or contact our support team with your model number, and we'll confirm which one is correct before you order.
Should I replace just one roller, or all of them?
It's worth checking all of them while you have access. Dryers typically use more than one roller supporting the drum, and since they're the same age and under the same stress, if one has worn out the others are often not far behind. Spin each roller by hand — if any feel stiff, gritty, or rough, replace them together to avoid repeating this repair again soon.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Midea to factory specifications — guaranteed fit, materials, and performance. It matches the original wheel design, bearing, and axle fitment of the drum roller originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
12638200000241 Genuine OEM Midea Dryer Drum Belt
The 12638200000241 is a Genuine OEM Midea replacement dryer drum belt compatible with a wide range of Midea, Criterion, and Insignia electric and gas dryers, including the MLE41/45/47/52, MLG45/52, MLTE37, CDE41, CDG41/45, CLADE67, and MDD160 series. The drum belt wraps around the dryer drum and the motor pulley, transferring the motor's rotation to spin the drum during the drying cycle. When the belt breaks, stretches, or wears out, the motor continues to run but the drum no longer spins — clothes sit still in the drum while the motor hums, and the dryer cannot complete a normal cycle.
As a Genuine OEM part manufactured by Midea to factory specifications, the 12638200000241 is constructed from durable black rubber. Packaged dimensions are approximately 11" L x 3" W x 2" H. Note: if the drum belt has failed, this is also a good opportunity to inspect the drum support rollers (Midea 12638000004021) and the idler/tensioner pulley assembly while the dryer cabinet is open — these components wear together and a failing roller or pulley can accelerate belt wear. Installs in 45–60 minutes with basic hand tools.
Quick Answer
The 12638200000241 Genuine OEM Midea Dryer Drum Belt fixes Midea, Criterion, and Insignia dryers where the motor runs but the drum doesn't spin, the belt has snapped or is visibly stretched, or where there's a burning rubber smell during operation. Black rubber drum belt. Packaged dimensions approximately 11" L x 3" W x 2" H. Genuine OEM. Compatible with Midea MLE41/45/47/52, MLG45/52, MLTE37, CDE41, CDG41/45, CLADE67, MDD160 series, plus Criterion CDE41N1AW/CDG41N1AW/CDG45N1AW and Insignia Midea-built models.
Common Problems This Part Fixes
Drum not spinning — belt has broken or slipped off
Motor runs and hums but the drum stays still
Drum spins intermittently — belt slipping under load
Burning rubber smell during operation — belt slipping on the motor pulley
Squealing or chirping noise during the drying cycle — belt frayed or stretched
Belt visibly cracked, frayed, broken, or missing inside the dryer cabinet
Extended drying times — drum not rotating at correct speed due to a worn belt
Replaces Part Numbers
This drum belt directly replaces the following part number:
12638200000241, AP7158561, PS18170626
This is the Midea manufacturer part number used across the compatible Midea, Criterion, and Insignia dryer platform. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This drum belt is compatible with select Midea, Criterion, and Insignia electric and gas dryers, including:
Midea electric dryers — MLE41N1AWW, MLE45N1AWW, MLE45N1BWW, MLE45N3BMG, MLE45N3BWW, MLE47A3AGG, MLE47C3AWW, MLE47C4AWW, MLE47R5BWW, MLE52N3AWW, MLE52S7AGS, MLE52S7AWW
Midea gas dryers — MLG45N1AWW, MLG45N1BWW, MLG45N3BMG, MLG45N3BWW, MLG52S7AGS, MLG52S7AWW
Midea — MLTE37N1BWW, CLADE67W, MDD160A2301E1305 and related models
Criterion — CDE41N1AW (electric), CDG41N1AW (gas), CDG45N1AW (gas)
Insignia electric dryers — NSDRE67WH8A, NSFDRE67WH8A, NSFDRE67WH8AC, NSFDRE77WH8B, NSTDRE67W1, NSTDRE75W1
Insignia gas dryers — NSFDRG67WH8A, NSTDRG67W1, NSTDRG75W1
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Midea to factory specifications — guaranteed fit and performance
Wraps around the dryer drum and motor pulley to transfer the motor's rotation to spin the drum
Durable black rubber construction designed for continuous flex and motor load
Packaged dimensions: approximately 11" L x 3" W x 2" H
Compatible with the full Midea, Criterion, and Insignia electric and gas dryer platform
Often replaced along with the drum support rollers (Midea 12638000004021) and idler pulley assembly
Installs in 45–60 minutes with basic hand tools
Product Specifications
Part Number
12638200000241
Part Type
Dryer Drum Belt
Condition
Genuine OEM
Application
Electric and Gas Dryers (Midea platform)
Material
Rubber
Color
Black
Packaged Dimensions
Approximately 11" L x 3" W x 2" H
Often Replaced With
Drum Support Roller (Midea 12638000004021)
Compatible Brands
Midea, Criterion, Insignia
Installation Notes
⚠️ Unplug Dryer Before Starting (Shut Off Gas First on Gas Models) — Wear Work Gloves Disconnect power before beginning (and shut off the gas supply first if you have a gas dryer model). Wear work gloves — there are sharp sheet metal edges inside the dryer cabinet. Remove the lint filter housing screws, release the top panel locking clips with a putty knife, and lift the top panel. Disconnect the door switch harness and remove the front panel to access the drum, drive belt, and motor/idler pulley assembly. Take a photo of the existing belt routing before removing anything — this is essential for correct reassembly. Release the old belt from the idler pulley and slide it off the drum and motor pulley. Carefully lift the drum out and inspect the drum support rollers and idler pulley for wear — replace them now if needed while the dryer is open. Wrap the new 12638200000241 belt around the drum (ribbed side against the drum). Reinstall the drum, then route the belt around the motor pulley and under the idler pulley, allowing the idler to tension the belt. Reassemble the front panel and top panel in reverse order. Restore power (and gas, for gas models) and run a test cycle to confirm smooth, quiet drum rotation. Tools needed: Phillips screwdriver, putty knife, work gloves.
Frequently Asked Questions
How do I know if the drum belt has failed?
The clearest sign of a broken drum belt is a dryer where the motor starts and runs normally, but the drum does not spin — you'll hear the motor humming with no drum movement. If you open the door mid-cycle and the drum spins freely with no resistance (as if disconnected from the motor), the belt has either broken or slipped off completely. A stretched or worn belt that still drives the drum may also produce squealing or burning rubber smells from slippage on the motor pulley. Visually inspecting the belt after removing the dryer's front panel confirms the condition.
Should I replace the drum rollers and idler pulley at the same time?
Yes — since the dryer cabinet must already be opened and the drum removed to replace the belt, this is the ideal time to also inspect and replace the drum support rollers (Midea 12638000004021) and the idler/tensioner pulley. All three components form the drum drive system and tend to wear together. A worn roller or pulley is often what caused the belt to fail prematurely in the first place. Addressing them together in a single repair eliminates the most common drum drive failure points and prevents a near-term repeat teardown.
Does this belt fit Insignia and Criterion dryers as well as Midea?
Yes — Insignia (Best Buy) and Criterion (Sears/Kmart) are house brands whose dryers in this size class are manufactured by Midea and use the same internal components, including this drum belt. Confirmed compatible models include Insignia NSDRE67WH8A, NSFDRE67WH8A, NSFDRE77WH8B, NSTDRE67W1, NSTDRE75W1 (electric) and NSFDRG67WH8A, NSTDRG67W1, NSTDRG75W1 (gas), plus Criterion CDE41N1AW (electric) and CDG41N1AW/CDG45N1AW (gas). Always verify your specific model number before ordering.
Which way does the belt go around the drum — ribbed side in or out?
On the drum belt, the ribbed (grooved) side should face inward, against the drum surface, while the smooth side faces outward. The ribs grip the smooth drum surface to drive it as the motor pulley turns. On the motor pulley side, the belt seats in the grooves of the small motor pulley. Take a photo of how the original belt was routed before removing it — this is the most reliable way to confirm correct orientation during reinstallation.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Midea to factory specifications. It is the exact same drum belt installed in compatible Midea, Criterion, and Insignia electric and gas dryers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
2 Pack - 12638000000786 Genuine OEM Midea Dryer Drum Roller
The 12638000000786 is a genuine Midea OEM dryer drum support roller. This roller sits underneath the drum, along its support track, and does the physical work of holding the drum's weight while letting it turn freely as the belt drives it around. A dryer typically uses more than one of these rollers working together to keep the drum properly supported and centered.
Over time, the wheel and bearing inside the roller wear down from the constant heat and rotation the dryer subjects them to, eventually developing a flat spot, seizing up, or simply wearing thin enough that the drum sits unevenly. A worn roller produces a distinctive symptom: a rumbling, squeaking, or thumping noise that rises and falls with drum rotation, often getting louder as a load tumbles or as the roller continues to wear.
Quick Answer
The 12638000000786 Genuine OEM Midea Dryer Drum Roller fixes Midea-built dryers with a rumbling, squeaking, or thumping noise that rises and falls with drum rotation. Supports and centers the drum along its support track.
Common Problems This Part Fixes
Rumbling or grinding noise that rises and falls with drum rotation
Squeaking or squealing noise from inside the dryer during operation
Thumping or knocking noise, especially with a heavier load
Noise that gets louder over time as the roller wears further
Drum that sits unevenly or wobbles slightly when turned by hand
Visible flat spot, cracking, or wear on the roller wheel
Noise that continues even with an empty drum tumbling
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
12638000000786, AP7155087, PS18170572
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. This is a distinct part number from our 12638000004021 drum roller listing — the two are not interchangeable and do not cross-reference each other. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This drum roller is compatible with select Midea-built dryers.
Note: A specific verified compatible model list was not available at the time this page was built. Midea uses several different roller designs across its dryer lineup, and this part number is distinct from our 12638000004021 listing. Always verify your full model number before ordering. Contact our support team with your model number and we will confirm fitment before you purchase.
Key Features
Genuine Midea OEM part — factory-specified wheel and bearing design
Supports the drum along its support track, allowing smooth rotation as the belt drives it
Resolves "rumbling," "squeaking," and "thumping" noise symptoms caused by roller wear
Direct drop-in replacement for the original roller and axle assembly
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
12638000000786
Part Type
Dryer Drum Support Roller
Condition
Genuine OEM
Brand
Midea
Location
Drum support track
Function
Supports and centers the drum during rotation
Quantity
1 roller
Compatible Brand
Midea
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Access is typically through the rear panel: remove the screws securing the panel, then release the drum belt from the idler pulley to relieve tension so the drum can be supported and moved slightly for access to the rollers underneath. Photograph the roller and axle positions before removing anything. Remove the retaining clip or fastener holding the worn roller's axle in place, then slide the old roller off. Install the new 12638000000786 roller onto the axle in the same orientation, and secure it with the retaining clip or fastener. While you're in there, check the other rollers by spinning each one by hand — if any feel stiff, gritty, or worn, replace them at the same time, since they're typically the same age and wear on a similar schedule. Re-tension the belt around the idler pulley, reassemble the rear panel, restore power, and run a short empty cycle to confirm the noise has resolved. Tools needed: Phillips screwdriver, nut driver, pliers, work gloves.
Frequently Asked Questions
My dryer makes a rumbling noise that gets louder over time. Is this the part I need?
Yes, this is the classic symptom of a worn drum roller. As the wheel and bearing wear down, the noise typically starts subtle and gradually worsens, often becoming most noticeable with a full load as the extra weight puts more load on the worn wheel. If the noise rises and falls in rhythm with the drum turning, a roller is the most likely cause.
Is this the same roller as your 12638000004021 listing?
No. These are two distinct Midea part numbers, and they do not cross-reference or replace each other. If you're not sure which roller your dryer uses, check the number stamped on your existing roller or contact our support team with your model number, and we'll confirm which one is correct before you order.
Should I replace just one roller, or all of them?
It's worth checking all of them while you have access. Dryers typically use more than one roller supporting the drum, and since they're the same age and under the same stress, if one has worn out the others are often not far behind. Spin each roller by hand — if any feel stiff, gritty, or rough, replace them together to avoid repeating this repair again soon.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Midea to factory specifications — guaranteed fit, materials, and performance. It matches the original wheel design, bearing, and axle fitment of the drum roller originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 341241 Dryer Drum Belt
The XPARTCO 341241 is an aftermarket replacement dryer drum belt compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, and Ikea. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry.
Made from high-strength rubber with reinforced ribs, this belt measures 92-1/4 inches long x 1/4 inch wide and features 4 ribs and 3 grooves. It is flat on one side and ribbed on the other, and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It also replaces some 5-rib, 4-groove belts. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 341241 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, and more. Measures 92-1/4" L x 1/4" W with 4 ribs and 3 grooves.
Common Problems This Part Fixes
Dryer drum not spinning — motor runs but drum stays still
Clothes not tumbling during the drying cycle
Thumping, squealing, or slapping noise during operation
Dryer runs but produces no heat because drum is stationary
Burning rubber smell coming from the dryer
Visible broken or frayed belt pieces found inside the dryer cabinet
Clothes taking too long to dry due to drum not rotating at correct speed
Replaces Part Numbers
This drum belt directly replaces the following OEM and cross-reference part numbers:
341241, 14210003, 2008, 26000341241, 26000349533, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 341241VP, 345473, 349533, 529597, 53-0186, 53-1080, 53-1086, 53-1528, 53-1589, 53-2671, 53-2910, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8206, 8210, 920H4, 920H5, 99906951, 99989673, 99989674, FSP341241, LB276, LB279, P46-037, P46-149, W10127457, W10131364, AH346995, AP32, EA346995, ER341241, AWP39161, PD00002263, EAP346995, 694088-NC, AP2946843, PS346995, TJ341241.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (select models)
Maytag dryers
KitchenAid dryers
Amana dryers
Roper dryers
Admiral dryers
Jenn-Air dryers
Estate dryers
Magic Chef dryers
Crosley dryers
Inglis dryers
Norge, Modern Maid, Hardwick, Caloric, and Ikea dryers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle
92-1/4" length x 1/4" width — 4-rib, 3-groove design; flat on one side, ribbed on the other
Also replaces some 5-rib, 4-groove belts — wide cross-compatibility across Whirlpool-family models
Made from high-strength rubber with reinforced ribs — resists cracking, stretching, and heat damage
Direct replacement for OEM part numbers 341241 and 8066065 — no modification required
Compatible with over a dozen major appliance brands built on the Whirlpool platform
Aftermarket replacement built to OEM-equivalent quality standards
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Often replaced together with the idler pulley (691366) and drum rollers (349241T) for a complete drum drive repair
Product Specifications
Part Number
341241
Part Type
Dryer Drum Drive Belt
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Length
92-1/4 inches
Width
1/4 inch
Ribs
4 ribs, 3 grooves
Profile
Flat on one side, ribbed on the other
Material
High-strength rubber with reinforced ribs
Color
Black
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, Ikea
Often Replaced With
691366 Idler Pulley, 349241T Drum Rollers
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen, then unscrew the two Phillips screws inside the lint filter housing. Use a putty knife 2 inches from each front corner to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release belt tension at the idler pulley, lift the drum slightly, and slide the old belt off. Loop the new 341241 belt around the drum with the ribbed side facing down (toward the drum). Route the belt around the idler pulley and motor pulley — consult your model's service manual or a model-specific video for the correct belt path. Reassemble and run a test cycle. Tip: While the drum is out, inspect and replace the idler pulley (691366) and drum rollers (349241T) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
How does the 341241 differ from the W10205415 and 6602-001655 belts?
All three are 92-inch dryer drum belts, but they differ in width and rib count. The 341241 is 1/4" wide with 4 ribs and 3 grooves. The W10205415 is 3/8" wide with 5 ribs and 4 grooves. The 6602-001655 is 5/16" wide with 5 ribs and 4 grooves designed for Samsung dryers. Always match the part number to your specific model — do not substitute based on appearance alone.
Will this belt fit my Kenmore dryer?
Many Kenmore dryers — especially the popular 110-series — are manufactured by Whirlpool and use the 341241 belt. Check your model number against the compatibility list and contact our support team if you need help confirming the fit before ordering.
How do I know if my drum belt needs to be replaced?
The most obvious sign is that the dryer motor hums but the drum does not spin. You may also notice a thumping or slapping sound during operation, a burning rubber smell, or clothes that are damp after a full cycle. Open the dryer cabinet to visually confirm if the belt is broken, frayed, or stretched.
Should I also replace the idler pulley and drum rollers?
Yes — since the dryer is already disassembled, it is highly recommended to inspect and replace the idler pulley (691366) and drum support rollers (349241T) at the same time. These parts wear at a similar rate and replacing all three together — often sold as a repair kit — prevents having to disassemble the dryer again in the near future.
Is this an OEM or aftermarket part?
This is an aftermarket replacement built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is made from high-strength rubber to match the dimensions and performance of the original 341241 belt.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Choice Manufactured Parts
Choice 6602-001655 Dryer Drum Belt for Samsung
Aftermarket 92-inch, 5-rib / 4-groove dryer drum drive belt for select Samsung and Kenmore dryers.
Product Overview
The Choice 6602-001655 dryer drum belt transfers power from the dryer motor pulley to the drum so the drum can rotate during the drying cycle.
This Choice Manufactured Parts aftermarket belt is designed as a replacement for Samsung belt 6602-001655 on compatible dryers.
Quick Answer
6602-001655CM is a 92-inch, 5-rib / 4-groove aftermarket dryer drum belt for select Samsung and Kenmore dryers. It replaces Samsung 6602-001655 and 6602-001314. Verify the complete dryer model number before ordering.
Common Problems This Part May Fix
Dryer motor runs but drum does not turn
Broken or snapped drum belt
Belt is frayed, glazed, cracked, or stretched
Thumping or slapping noise from a damaged belt
Drum turns intermittently or slips under load
Replaces and Cross-References
6602-001655, 6602-001314, 5PH2337, LB1655, ASM874658, PD00002012, EAP2407938, AP4373659, PS4133825, 6602-001655CM, ER6602-001655.
Cross-reference numbers are provided for identification. This is a Choice Manufactured Parts aftermarket replacement and is not manufactured by Samsung.
Compatibility
Fits select Samsung and Kenmore dryers using the 6602-001655 / 5-rib belt configuration. Compatible model examples include:
DV203AEW/XAA
DV209AEW/XAA
DV218AEW/XAA
DV42H5200EP/A3
DV42H5600EW/A3
DV45H7000EW/A2
DV45K6500EV/A3
DV50K7500GW/A3
DVE45R6100C/A3
DVE45R6300W/A3
DVG45T6000W/A3
Kenmore 592 Series
Important: This is a partial compatibility list. Match the complete dryer model number and original belt number before purchasing.
Key Features
Choice Manufactured Parts aftermarket replacement
92-inch drum drive belt
5 ribs / 4 grooves
Approx. 5/16-inch belt width
Ribbed drive surface with smooth outer/back surface
For select Samsung and Kenmore dryers
Specifications
Choice Part Number
6602-001655CM
Brand
Choice Manufactured Parts
Part Type
Dryer Drum Drive Belt
Condition
New
Part Quality
Aftermarket Replacement
Length
Approx. 92 in.
Width
Approx. 5/16 in.
Ribs / Grooves
5 Ribs / 4 Grooves
Primary Replacement For
Samsung 6602-001655
Application
Dryer Drum Drive System
Installation Notes
Disconnect dryer power before service.
Access the drum and note the original belt routing before removal.
Route the replacement belt around the drum, idler pulley, and motor pulley exactly as the original.
Install the ribbed side toward the drum/pulley contact surface as required by the dryer design.
Confirm the idler pulley applies proper tension and spins freely.
Rotate the drum by hand before reassembly to verify smooth belt tracking.
Diagnostic tip: Before installing a new belt, inspect the idler pulley, drum support rollers, motor pulley, and felt seals. A seized or damaged support component can quickly damage a replacement belt.
FAQ
Is this a Genuine Samsung OEM belt?
No. This is a Choice Manufactured Parts aftermarket replacement for Samsung 6602-001655.
How long is the belt?
Choice specifies this belt at approximately 92 inches long.
How many ribs does it have?
It has 5 ribs and 4 grooves.
Does it replace 6602-001314?
Yes. 6602-001314 is a commonly listed earlier/cross-reference number for the 6602-001655 belt family.
Does this include the idler pulley?
No. This listing is for the drum belt only unless the product package explicitly states otherwise.
Shop With Confidence
Match your complete dryer model number and original belt number before ordering. Compatibility assistance is available if you are unsure which belt your dryer uses.
Choice Replacement92-Inch Belt5 Rib / 4 GrooveCompatibility Support
XPARTCO WE03X37317 - WE03X37318 Dryer Drum Glide Set
The XPARTCO WE03X37317 - WE03X37318 is an aftermarket replacement drum glide set for GE and Hotpoint dryers, also used on select Whirlpool and Kenmore dryers and washer-dryer combos. These plastic bearing slides are the wear pads at the front of the dryer that the drum rides on as it turns. As they wear down, the drum no longer sits and rolls smoothly, and the dryer starts to squeak, squeal, or rumble. In worse cases the drum catches or drags, and clothes can get snagged or marked between the drum and the front frame.
This set pairs both glide types used on these dryers: the WE03X37317 and the WE03X37318 front bearing slides. Because the slides wear at the same rate, replacing them together restores smooth, quiet drum rotation and avoids a repeat repair. Easy to install, typically 30–60 minutes.
Quick Answer
The XPARTCO WE03X37317 - WE03X37318 Drum Glide Set fixes a GE or Hotpoint dryer that squeaks, squeals, or rumbles loudly as the drum turns, or whose drum drags or catches. Replaces both the WE03X37317 and WE03X37318 front bearing slides. Classic symptom: a loud squeal or scraping noise from the drum area that gets worse over the cycle, sometimes with marks or snags on clothes.
Common Problems This Part Fixes
Loud squeaking, squealing, or scraping noise while the drum tumbles
Drum not spinning smoothly, or dragging and catching
Marks, wrinkles, or snags on clothes from items catching between the drum and the front frame
Excessive drum noise during drying cycles
Visibly worn, thin, or chewed-up plastic glides at the front of the drum
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This glide set replaces the following part numbers:
WE03X37317, WE1M1067, WE01M0316, WE03X37317-50PK, WE1M1067-100PK, WE1M316, WE1M481, WE1M507, AGE25692, AP5668531, AP7217723, FIX17137203, PD00089026, PS6447706, PS17137203, WE03X37318, WE1M504, WE01M0333, WE1M333, TJDE504, TJWE1M333, DE504, DE775, TJDE775, AH755842, EA755842, ERWE1M333, AGE25703, AP7217724, PD00088960, PS17137205
The first group of numbers (WE03X37317, WE1M1067, WE1M316, WE1M481, WE1M507, AP7217723, PS17137203) is for the gray glide. The second group (WE03X37318, WE1M504, WE01M0504, WE01M0333, WE1M333, AP7217724, PS17137205) is for the white glide. The AP/PS-prefixed numbers are third-party catalog cross-references for the same physical parts.
Compatibility
These glides are used on GE, Hotpoint, Whirlpool, and Kenmore dryers and washer-dryer combos, including models such as:
GE 61140418, 61140419, 61148418, 61148419
Numerous additional GE and Hotpoint dryer and washer-dryer combo models
Note: These glides fit a wide range of models, so the list above is only a sample. Compare the glides in your dryer, or your parts diagram, against the Replaces list above, or contact our support team with your model number and we'll verify fit before you order.
Key Features
Aftermarket replacement drum glide set covering both the WE03X37317 and WE03X37318 front bearing slides
Durable plastic bearing slides that let the drum rotate smoothly
Resolves squeaking, squealing, and dragging drum symptoms
Helps prevent clothes from being marked or snagged at the front of the drum
Replacing both glide types together avoids a repeat repair
Easy installation — typically 30–60 minutes
Product Specifications
Part Number
XPWE03X37317-WE03X37318
OEM Part Number
WE03X37317, WE03X37318
Part Type
Dryer Drum Glide (Front Bearing Slide) Set
Condition
Aftermarket Replacement
Set Includes
WE03X37317 and WE03X37318 Front Bearing Slides
Material
Plastic
Application
GE, Hotpoint, Whirlpool & Kenmore Dryers and Washer-Dryer Combos
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker, and shut off the gas supply first if it's a gas model. Remove the top and front panels per your model's service guide to expose the front of the drum, and disconnect any wiring that's in the way. Lift or support the drum enough to reach the worn glides, which are held in place at the front bearing support. Pull out the old glides, noting the position and orientation of each, and fit the new ones in the same positions. Reassemble the dryer and spin the drum by hand to confirm it turns smoothly before restoring power. Replace the glides as a set, since they wear at the same rate.
Frequently Asked Questions
My dryer squeals or rumbles loudly while tumbling — is this the part I need?
Worn drum glides are a very common cause of squeaking and scraping from the drum area. If the plastic glides look thin, grooved, or chewed up, replacing them should quiet the dryer and restore smooth rotation. Also check the drum rollers and idler pulley, which can cause similar noises.
Why are there two different part numbers?
GE uses two glide types at the front of the drum: glide (WE03X37317) and glide (WE03X37318). This set covers both, so you can replace the full set in one go.
Should I replace all the glides or just the worn ones?
Replace them together. The glides wear at about the same rate, so if one is worn the others are usually close behind.
Will this fit my Whirlpool or Kenmore dryer?
These glides are cross-listed for select Whirlpool and Kenmore dryers and washer-dryer combos as well as GE and Hotpoint. Compare the part numbers on your parts diagram against the Replaces list, or contact our support team with your model number and we'll confirm.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO Y312959 Dryer Drum Belt Replaces WPY312959
The XPARTCO Y312959 is an aftermarket replacement dryer drum drive belt compatible with a wide range of Maytag, Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers — including the long-running vintage Maytag DE and DG halo-of-heat series. The drum belt is a critical component that connects the drive motor to the drum. It wraps all the way around the drum's circumference, passes around a spring-loaded idler (tension) pulley, and connects to the drive motor pulley. When the motor runs, it drives the belt, which rotates the drum to tumble clothes for even drying. Over time, drive belts fail from normal wear, cracking or fraying from age and repeated flexing, exposure to heat and lint buildup, stretching that causes slipping, or sudden breakage.
Constructed from durable black rubber. Dimensions: 100" long x 3/8" (5/16") wide, with 5 ribs and 4 grooves. Includes instructions. It directly replaces Y312959, WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, PD00028571, and PS11757542. Important: install the belt with the grooved side against the motor pulley and the smooth side against the drum. Because the belt is symmetrical, it can be installed with either end facing out. Often replaced together with the idler pulley (WP6-3037050) and drum support roller kit (12001541 / 303373K), sold separately. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO Y312959 Dryer Drum Belt fixes Maytag, Jenn-Air, Whirlpool, Amana, and Kenmore dryers where the drum won't turn (motor runs but drum stays still), the drum spins slowly, or the dryer makes loud squealing/thumping noises. 100"L x 3/8"W. 5 ribs, 4 grooves. Black rubber. Replaces WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, PS11757542. Install grooved side against the motor pulley, smooth side against the drum. Often paired with idler pulley WP6-3037050 and drum roller kit 12001541.
Common Problems This Part Fixes
Dryer drum doesn't turn — motor runs but drum stays still (belt snapped)
Dryer drum rotates slowly or intermittently — belt worn or slipping
Loud squealing, squeaking, or thumping noises during operation — belt cracked, glazed, or misaligned
Clothes taking much longer than normal to dry — drum not tumbling clothes effectively
Visible cracks, fraying, or glazing on the belt surface
Belt broken completely — often heard as a loud snap during operation
Drum spins freely by hand with no resistance — a clear sign the belt has snapped
Belt worn thin or stretched after decades of use on a vintage Maytag dryer
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
Y312959, WPY312959, 1000H5, 1246110, 3-12959, 3-14774, 312959, 314774, 8195-959, P46-150, P46-151, 6 3129590, AP6024192, AWP51437, EAP11757542, PD00028571, PS11757542
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This dryer drum belt is compatible with select dryers from the following brands:
Maytag electric dryers — DE106, DE107, DE110, DE180, DE18CA/CM/CS/CT, DE19CA/CD/CS/CT, DE210, DE212, DE21CA/CM/CS/CT, DE22CA/CS/CT, DE23CD, DE24CA/CM/CS/CT, DE25CS, DE26CA/CD/CS/CT, DE27CA/CS/CT, DE303, DE308, DE309, DE312, DE313, DE382, DE4000, DE408-DE9900 series and many more
Maytag gas dryers — DG106, DG107, DG110, DG18CA/CM/CS/CT, DG19CA/CD/CS/CT, DG210, DG212, DG21CA/CM/CS/CT, DG22CA/CS and related DG-series models
Maytag dryers — LDE and LDG series (LDE7304ACE, LDE8406ACE/ACM/ADE, LDE8410, LDG8424AAE, LDG9304AAM and related)
Jenn-Air dryers (select models)
Whirlpool dryers (select Whirlpool-built models)
Amana, Magic Chef, Admiral, Norge, Roper dryers (select Whirlpool/Maytag-built models)
Kenmore / Sears dryers (select Whirlpool/Maytag-built models)
Note: When you replace the drum belt, this is also the ideal time to inspect the idler (tension) pulley (WP6-3037050) and the drum support rollers (kit 12001541 / 303373K) — they wear from the same friction cycles as the belt, and if they're rough, seized, or noisy, the new belt will wear out prematurely. Before replacing the belt due to noise, check the drum support rollers and idler pulley and replace if you see signs of wear. Always verify your dryer model number before ordering.
Key Features
Dryer drum drive belt — connects the motor pulley to the drum to enable tumbling during drying cycles
Resolves "drum won't turn," "loud squealing noise," and "long dry times" symptoms when caused by belt failure
Durable black rubber construction — engineered to withstand thousands of hours of high-temperature, high-friction operation
Dimensions: 100" long x 3/8" (5/16") wide with 5 ribs and 4 grooves
Install with the grooved side against the motor pulley and the smooth side against the drum
Symmetrical design — can be installed with either end facing out
Includes instructions
Replaces WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, and PS11757542
Compatible with vintage Maytag DE/DG series, LDE/LDG series, plus Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers
Often replaced together with the idler pulley (WP6-3037050) and drum support roller kit (12001541 / 303373K), sold separately
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
Y312959
OEM Part Number
WPY312959
Part Type
Dryer Drum Drive Belt
Condition
Aftermarket Replacement
Application
Dryers (Maytag / Whirlpool platform)
Length
100"
Width
3/8" (5/16")
Ribs / Grooves
5 ribs / 4 grooves
Color
Black
Material
Rubber
Installation Orientation
Grooved side against motor pulley, smooth side against drum
Often Paired With
Idler Pulley (WP6-3037050), Drum Roller Kit (12001541 / 303373K)
Compatible Brands
Maytag, Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Wear Work Gloves — Grooved Side Against Motor Pulley Disconnect power at the breaker or outlet before beginning. Wear work gloves to protect your hands from sharp sheet metal edges inside the dryer cabinet. Access the drum by removing the appropriate panels — the specific procedure varies by model, but on many vintage Maytag dryers this involves removing the front or top panel. Photograph the belt routing before disassembly if any belt fragments remain. Remove any pieces of the old broken belt from around the drum, motor pulley, and idler pulley, and vacuum out accumulated lint and belt dust. Clean any belt dust off the drum. Route the new Y312959 belt around the drum. Install with the grooved (ribbed) side against the motor pulley and the smooth side against the drum — this is the correct orientation for proper drive engagement. Because the belt is symmetrical, either end can face outward. A helpful tip from experienced installers: use two small pieces of tape to hold the belt against the drum while you lace it onto the idler and motor pulleys. From under or behind the drum, route the belt around the idler (tension) pulley and the drive motor pulley following the belt diagram for your model. Rotate the drum by hand a few full turns to confirm the belt seats correctly and rides smoothly without binding. While you have the machine apart, check that the idler pulley and drum support rollers spin freely — if they're rough or noisy, replace them now to protect the new belt. Reassemble the panels, restore power, and run a test cycle. Tools needed: Phillips screwdriver, nut driver, socket/ratchet, vacuum, work gloves, tape (helpful for holding the belt).
Frequently Asked Questions
My dryer runs but the drum won't turn — is the belt the problem?
Almost certainly, yes. When the motor runs (you hear the humming) but the drum stays still, the belt has almost always snapped. To confirm without opening the dryer: reach in and try turning the drum by hand. If it spins freely with no resistance whatsoever, the belt is broken. If it turns but feels notchy or resistant, the belt may still be intact but the drum rollers or bearings could be the issue. Opening the dryer to inspect is the definitive check — a snapped belt will be lying in the bottom of the cabinet. On decades-old Maytag dryers, a belt that finally snapped from age is one of the most common repairs.
Which way does the belt go — grooves in or out?
Install the belt with the grooved (ribbed) side facing the motor pulley and the smooth side against the drum. The ribs engage the grooved motor pulley for positive drive without slipping, while the smooth side rides against the large drum surface. Note that this is the opposite orientation from some other dryer belts (like certain Frigidaire belts where grooves face the drum) — so don't assume; follow the grooves-against-motor-pulley rule for this Maytag/Whirlpool-platform belt. The belt is symmetrical end-to-end, so either end can face outward; only the grooved-vs-smooth orientation matters.
Should I replace the idler pulley and drum rollers at the same time?
It's strongly recommended, especially on older dryers. The idler (tension) pulley (WP6-3037050) keeps the belt under proper tension, and the drum support rollers (kit 12001541 / 303373K) carry the drum's weight as it turns. All wear from the same friction and heat cycles as the belt. In fact, a common piece of repair advice is: before you replace the belt due to noise, check the drum support rollers and idler pulley first — worn rollers or a seized idler are frequent noise sources, and if you replace only the belt, the new belt may wear out prematurely against a bad pulley. Since the dryer is already apart, replacing all three together is efficient and saves a repeat repair.
What's the difference between Y312959 and WPY312959?
These are the same drum belt across production revisions. Y312959 was the earlier Maytag part number and WPY312959 is the Whirlpool-era part number (after Whirlpool acquired Maytag) for the same belt. WPY312959VP is a variant packaging code. All are physically and functionally identical — if your dryer's parts diagram shows any of these numbers, this listing is the correct replacement. The many other cross-references (3-12959, 314774, LB234, P46-150, etc.) reflect the belt's long production history across decades of Maytag dryers.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Maytag/Whirlpool OEM part, but is manufactured from durable rubber to match the dimensions (100"L x 3/8"W), rib and groove pattern (5 ribs, 4 grooves), and drive function of the original Y312959/WPY312959 drum belt used in compatible Maytag, Jenn-Air, Whirlpool, Amana, and Kenmore dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
134503600 Genuine OEM Frigidaire Dryer Drum Belt
The 134503600 is a genuine Frigidaire OEM drum belt for Frigidaire, Electrolux, Gibson, Kenmore, Tappan, Kelvinator, Westinghouse, and Crosley dryers. This flat belt wraps around the drum and the motor pulley, and as the motor turns, the belt transmits that rotation to spin the drum — the constant tumbling this creates is what spreads heat evenly across your laundry and keeps the load moving through the drying cycle.
Measuring approximately 88-3/4" long and 1/4" wide, with 4 ribs and 3 grooves on the inside for a secure grip against the pulleys. Over time, the belt material wears, cracks, or glazes over from years of use, overloading the dryer, or prolonged heat exposure making it brittle. A worn or broken belt produces a distinctive symptom: the motor runs, but the drum doesn't turn — you'll typically still hear the motor operating normally while the drum sits still. Other symptoms include thumping or squealing noise during operation, the drum stopping mid-cycle, or the dryer not starting at all. It directly replaces AP3865318, 1156784, 134163400, 134163500, 134503900, 148270, 148270-000, F148270-000, F1482740-000, 5303283471, AH1148434, EA1148434, PS1148434, and 131777700.
Quick Answer
The 134503600 Genuine OEM Frigidaire Dryer Drum Belt fixes Frigidaire, Electrolux, Gibson, Kenmore, Tappan, Kelvinator, Westinghouse, and Crosley dryers where the motor runs but the drum doesn't turn, or where you hear thumping/squealing noise or the drum stopping mid-cycle. 88-3/4" long, 1/4" wide, 4 ribs/3 grooves. Replaces AP3865318, 1156784, 134163400, 134163500, 134503900, 148270, 148270-000, F148270-000, F1482740-000, 5303283471, AH1148434, EA1148434, PS1148434, 131777700. If the motor is running but the drum won't turn, that's the classic sign of a broken belt.
Common Problems This Part Fixes
Motor runs but the drum doesn't turn
Dryer won't tumble clothes at all
Thumping or squealing noise during operation
Drum stopping mid-cycle
Cycle running without any tumbling
Dryer taking too long to dry, or not drying evenly
Dryer that won't start at all in some cases
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
134503600, 1156784, 134163400, 134163500, 148270, 148270-000, 5303283471, AH1148434, EA1148434, F148270-000, F1482740-000, WCI 134163400AU, PD00000114, EAP1148434, AP3865318, AFR14838, PS1148434
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select Frigidaire dryers, and also fits select Electrolux, Gibson, Kenmore, Tappan, Kelvinator, Westinghouse, and Crosley dryers built on the same platform, including model numbers such as:
AEQ6000CES0, AEQ6000CES1
AEQ6000ES, AEQ6000ES0, AEQ6000ES1
GLER341AS2, LER331DS0, CER3600AS1
Note: Always verify your full model number before ordering, since Frigidaire uses several different belt lengths across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified length, width, and rib pattern
Flat belt with 4 ribs and 3 grooves for secure grip against the drum and motor pulley
Resolves "motor runs but drum won't turn," "thumping or squealing noise," and "drum stops mid-cycle" symptoms
Approximately 88-3/4" long, 1/4" wide
Direct drop-in replacement matching the original length and profile
Replaces AP3865318, 1156784, 134163400, 134163500, 134503900, 148270, 148270-000, F148270-000, F1482740-000, 5303283471, AH1148434, EA1148434, PS1148434, and 131777700
Compatible with Frigidaire, Electrolux, Gibson, Kenmore, Tappan, Kelvinator, Westinghouse, and Crosley dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Sold individually
Product Specifications
Part Number
134503600
Part Type
Dryer Drum Belt
Condition
Genuine OEM
Brand
Frigidaire
Length
Approx. 88-3/4"
Width
1/4"
Profile
Flat, 4 ribs / 3 grooves
Function
Transmits motor rotation to spin the drum
Repair Difficulty
Easy to Moderate
Quantity
1 drum belt (sold individually)
Compatible Brands
Frigidaire, Electrolux, Gibson, Kenmore, Tappan, Kelvinator, Westinghouse, Crosley
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the top and front panels of the dryer to access the drum and belt path. Release tension from the idler pulley and remove the old belt. Wrap the new 134503600 belt around the drum and motor pulley, making sure it seats correctly in the grooves along the entire path. Reposition the drum and reapply tension through the idler pulley. Before closing everything up, observe drum rotation during a quick test start to confirm smooth movement without hesitation, and check belt alignment along the pulley path, listening for any slipping sounds. Reassemble the front and top panels. Restore power and run a full test cycle to confirm the drum tumbles smoothly with no unusual noise. Tools needed: 1/4" nut driver, Phillips screwdriver, work gloves.
Frequently Asked Questions
The motor is running but the drum won't turn. Is this the belt?
Yes, this is the classic and most reliable sign of a broken drum belt. If you can hear the motor running normally but the drum itself stays still, there's a good chance the belt has snapped and is no longer connecting the motor's rotation to the drum.
What causes this belt to wear out or break?
Regular use over time naturally wears the belt down, but a few things can accelerate that process: consistently overloading the dryer places extra strain on the belt, and excessive heat exposure from restricted airflow or prolonged use can make the material brittle and more prone to cracking or snapping.
Does this belt come with any other hardware, like the idler pulley?
No, this drum belt is sold individually. If your idler pulley or tensioner also needs replacing, that's a separate part you'll need to order in addition to this belt.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original length, width, and rib pattern of the drum belt originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
