Search results for "Tub Seals"

XPARTCO 8580309 Dishwasher Door Latch Strike Replaces WP8580309 The XPARTCO 8580309 is an aftermarket replacement door latch strike for Whirlpool-built dishwashers. This small metal component attaches at the top of the dishwasher tub and locks the door latch securely in place whenever the door is closed. It does double duty: mechanically, it's what keeps the door held shut and properly tensioned against the tub opening to maintain a watertight seal during the wash cycle, and it also acts as the actuator that trips the door switch, telling the control that the door is closed and it's safe to run. Made from durable metal, measuring approximately 2" in length. Over years of opening and closing the door, the strike can wear down, bend from an accidental impact, or simply weaken to the point where it no longer holds the latch with enough tension. Debris buildup around the strike can also interfere with proper latching. A failing strike produces a clear set of symptoms: the dishwasher won't start because the door switch never registers as closed, the door feels loose or doesn't seal tightly when shut, or water leaks out around the door during a cycle. It directly replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800. Quick Answer The XPARTCO 8580309 Dishwasher Door Latch Strike fixes Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers that won't start because the door won't latch, feel loose when closed, or leak water around the door during a cycle. Metal construction, approximately 2" long. Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, PS11746800. Package includes small parts — keep away from young children during installation. Common Problems This Part Fixes Dishwasher won't start because the door won't latch or the door switch never registers as closed Door feels loose, doesn't seal tightly, or doesn't hold shut properly Water leaking out around the door during a wash cycle Door latch failing to catch even though the door appears closed Visible wear, bending, or damage on the strike itself Increased door-closing noise since the strike no longer cushions the latch properly Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher door latch strike directly replaces the following OEM and cross-reference part numbers: 8580309, WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, EAP1156352 PS1156352, AWP48708, PD00004771. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door latch strike is compatible with select Whirlpool-built dishwashers across the Whirlpool family of brands, including: Whirlpool dishwashers — DP1040X, DU1055XTSS2, DU1145XTPBA Whirlpool GU series — GU1500XTKB0, GU1200XTKS0, GU1200XTLB3, GU2400XTPS3, GU1200XTKB0, GU1100XTLB1, GU1500XTLQ1 KitchenAid — KUDC02IRBL1, KUDI01DLBL2, KUDI01DLWH2, KUDL02IRBS3, KUDK01ILBS0, KUDK01ILBS1, KUDK01ILBS5, KUDK03ITBS1 Kenmore / Sears — 665.16512201, 665.16532200, 665.17533202, 665.17512200 Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers (select models) Note: Always verify your full model number before ordering, since Whirlpool uses several different door latch strikes across its dishwasher lineup, including the separate W10544004 / WPW10544004 strike used on other models. Contact our support team with your model number if you're unsure which strike fits your dishwasher. Key Features Aftermarket replacement door latch strike — attaches to the top of the tub and locks the door latch in place when closed Works as a mechanical actuator for the door switch, confirming to the control that the door is closed Provides the door tension needed for a proper watertight seal Resolves "won't start," "door won't latch," "loose door," and "leaking around the door" symptoms caused by strike wear or damage Durable metal construction, approximately 2" in length Direct drop-in replacement — mounts to the original tub location Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800 Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, and related dishwashers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number 8580309 OEM Part Number WP8580309 Part Type Dishwasher Door Latch Strike Condition Aftermarket Replacement Material Metal Length Approx. 2 in. Weight Approx. 0.03 lbs. Location Top of the dishwasher tub Function Locks the door latch and actuates the door switch Repair Difficulty Easy — basic hand tools, minor disassembly Quantity 1 door latch strike Compatible Brands Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, Crosley Installation Notes ⚠️ Unplug Dishwasher Or Shut Off Breaker Before Starting Unplug the dishwasher or shut off the house circuit breaker before beginning. Wear work gloves. Open the dishwasher door and locate the door latch strike mounted at the top of the tub opening, above where the door latch engages when closed. Using a flat-blade screwdriver, remove the screws securing the old strike in place, then lift it free. Position the new 8580309 strike in the same location, aligning it so the door latch will catch and engage correctly when the door is closed, and secure it with the mounting screws. Close the door and confirm the latch catches firmly and holds the door snugly against the tub with no give. Restore power and run a test cycle, checking around the door for any signs of leaking. Tools needed: flat-blade screwdriver, work gloves. Frequently Asked Questions My dishwasher won't start even though I closed the door. Is this the strike? It's a strong possibility. This strike acts as the mechanical actuator for the door switch — when the door closes, the strike is what physically trips the switch to signal the control that it's safe to run. If the strike has worn down, bent, or weakened, the door may appear closed without properly triggering that switch, leaving the dishwasher unable to start even though nothing looks obviously wrong. Water is leaking around my door during the cycle. Could that be this part? Yes, this is a common cause. The strike provides the tension that pulls the door snugly against the tub opening to maintain a watertight seal. If it's worn or damaged, the door may close but without enough holding tension to keep the seal tight, letting water seep out around the edges during the wash. Is this the same strike used on all Whirlpool dishwashers? No. Whirlpool uses more than one door latch strike design across its dishwasher lineup — for example, the W10544004 / WPW10544004 strike is a separate part used on other models such as the WDF520PADM, WDT730PAHZ, and WDT720PADM. Always check your full model number before ordering to make sure you're getting the correct strike for your specific dishwasher. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, mounting configuration, and door-tensioning function of the original WP8580309 latch strike used in compatible Whirlpool, Kenmore, KitchenAid, and related dishwashers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 154701001 Dishwasher Splash Shield Includes two corner pieces. Fits Electrolux, Frigidaire built dishwashers. Replaces Part Numbers: 154701001, 154685101, AH2203346, EA2203346, AP4338941, PS2203346.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 8182703 Washer Shock Absorber Replaces WP8182703 The XPARTCO 8182703 is an aftermarket replacement front-load washer shock absorber compatible with select Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, and Roper front-load washers in the GHW, WFW, MHWE, MFW, and KHWS series. The shock absorber is a hydraulic dampener that connects the outer washer tub to the base frame. During the spin cycle, the shock absorbers absorb and dampen the vibrations and movement generated by the spinning drum — keeping the washer stable, quiet, and protecting internal components from damage caused by excessive movement. Most compatible Whirlpool-family front-load washers use four shock absorbers — two at the front and two at the rear. When one or more shock absorbers wear out, the outer tub vibrates excessively, causing loud banging or thumping during the spin cycle. It is strongly recommended to replace all four shock absorbers at the same time. This listing is for a single shock absorber. It directly replaces WP8182703, 8181646, 1173231, and several additional cross-reference numbers. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 8182703 Washer Shock Absorber fixes front-load washers that shake violently, bang loudly, or walk across the floor during the spin cycle. The shock absorber dampens tub vibration. Most models use 4 shock absorbers — replace all 4 at the same time. Sold individually. Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, and Roper front-load washers. Replaces WP8182703, 8181646, AP6011831, and more. Common Problems This Part Fixes Violent shaking or vibrating during the spin cycle Loud banging, thumping, or clunking noise during spin Washer "walking" across the floor during the spin cycle Outer tub hitting the sides of the cabinet during high-speed spin Spin cycle errors caused by excessive tub movement triggering the imbalance sensor Visible oil leak, broken mount, or collapsed shock absorber body Washer repeatedly pausing spin cycle and redistributing the load without resolving the vibration Replaces Part Numbers This shock absorber directly replaces the following OEM and cross-reference part numbers: WP8182703, 8182703, 1173231, 8181646, EAP11745030, AWP48892, PD00003153, AP6011831, PS11745030. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This shock absorber is compatible with select front-load washers from the following brands and series: Whirlpool front-load washers — GHW and WFW series Maytag front-load washers — MHWE and MFW series Kenmore / Sears front-load washers (select Whirlpool-built models) KitchenAid front-load washers — KHWS series Amana front-load washers Jenn-Air front-load washers Admiral front-load washers Roper front-load washers Important: Most compatible models use 4 shock absorbers (2 front, 2 rear). This part is sold individually. It is strongly recommended to replace all 4 at the same time, as the remaining absorbers have experienced the same wear and will fail soon after. Key Features Hydraulic dampener that connects the outer washer tub to the base frame — absorbs spin cycle vibration and prevents tub-to-cabinet contact Keeps the washer stable and quiet during high-speed spin cycles, protecting drum bearings, seals, and cabinet from premature wear High-quality reinforced construction — excellent toughness, oil resistance, and resistance to weak acids and alkalis for long service life Direct replacement for WP8182703 and 8181646 — no modification required Compatible with Whirlpool GHW, WFW, Maytag MHWE, MFW, and KitchenAid KHWS series front-load washers Sold individually — most models require 4 shock absorbers; replace all 4 at the same time Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number 8182703 OEM Part Number WP8182703 Part Type Front-Load Washer Shock Absorber (Hydraulic Dampener) Condition Aftermarket Replacement Application Front-Load Washers Quantity Per Washer 4 (2 front, 2 rear) — sold individually Compatible Brands Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, Roper Compatible Series GHW, WFW, MHWE, MFW, KHWS Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Unplug the washer and turn off the water supply before beginning. To access the front shock absorbers, remove the lower front access panel. To access the rear shock absorbers, pull the washer away from the wall, disconnect the water hoses, and remove the rear panel. The shock absorbers connect the outer tub to the base frame with mounting pins at the top and bottom — turn the shock absorber 90 degrees at both pins to release and remove it. Install the new 8182703 shock absorber by inserting the pins into the top and bottom mounting brackets and rotating 90 degrees to lock in place. Replace all 4 shock absorbers during the same repair. Reconnect all panels and water hoses, plug in the washer, restore water supply, and run a spin cycle to verify normal operation. Work gloves are recommended as there are sharp edges inside the cabinet. Tools needed: Phillips screwdriver, channel-lock pliers, work gloves. Frequently Asked Questions What does the washer shock absorber do? The shock absorbers are hydraulic dampeners that connect the outer washer tub to the base frame of the machine. During the spin cycle — when the drum spins at high speeds — the shock absorbers absorb and dampen the vibrations and movement of the heavy outer tub, keeping it centered and preventing it from striking the sides of the washer cabinet. Without functioning shock absorbers, the washer vibrates violently, makes loud banging noises, and can "walk" across the floor during spin, potentially damaging internal components over time. How many shock absorbers does my front-load washer have? Most Whirlpool-family front-load washers compatible with the 8182703 shock absorber use four shock absorbers — two mounted at the front of the tub and two at the rear. This listing is for a single shock absorber. When replacing shock absorbers, it is strongly recommended to replace all four at once, as they all experience the same amount of use and the remaining absorbers are likely to fail soon after the first one. What is the difference between 8182703 and WP8182703? These are the same shock absorber. WP8182703 is the updated Whirlpool OEM part number that superseded the original 8182703. The 8181646 is also a cross-reference to this same part. This aftermarket replacement is compatible with all three numbers. My washer still vibrates after replacing the shock absorbers — what else could it be? If vibration persists after replacing all four shock absorbers, other possible causes include an unbalanced or overloaded drum, worn drum bearings, a failing suspension spring, or the washer not being level on the floor. Check that the washer's leveling feet are adjusted so all four corners are in firm contact with the floor. Also confirm the load is not oversized — overloading is the most common cause of spin vibration and can prematurely wear shock absorbers. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from high-quality reinforced materials to match the dimensions and performance of the original WP8182703 shock absorber. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

CIM15 Ice Maker (Copper) 15 Feet Copper Tubing and Self Tapping Saddle Valve Includes 15' 1/4" copper tubing, self tapping saddle valve and compression fitting. Low lead valve and fittings.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WP12956202 Refrigerator Water Reservoir & Filter Head Assembly - Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana Product Description Restore your refrigerator’s water and ice dispensing with the WP12956202 Water Reservoir & Filter Head Assembly from Parts-O-Matic. This genuine OEM replacement stores filtered water and directs it to the dispenser and ice maker. Designed for Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore refrigerators, it fixes issues like no/slow water flow, leaks, or ice maker failure. Note: Includes one reservoir and filter head assembly. Take photos of tubing and wiring during disassembly. Use a compatible water filter and flush the system post-installation. Replaces part numbers: WP12956202, 12956202, 12956204, 1401909, 67006323, PD00024187, EAP11738655, AP6005603, PS11738655. Compatibility: Compatible with models including but not limited to: Whirlpool: WRF535SMBM00, WRF555SDFZ00, WRX735SDHZ00 Maytag: MFI2570FEZ00, MFW2055FRZ00 KitchenAid: KRFC300ESS01, KRMF706ESS01 Jenn-Air: JFX2897DRM00 Amana: ASI2575GRS01 Kenmore: 106.51173310 Verify your model number or contact Parts-O-Matic support for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Kenmore refrigerators. 💧 Specifications: OEM plastic reservoir, tubing, and filter head with connectors for reliable water dispensing. 💰 Cost-Effective: OEM performance at a competitive price. 🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves no/slow water flow, leaks, or ice maker failure. Installation Notes: Safety First: Unplug the refrigerator and shut off the water supply before installation to avoid shock or leaks. Access the assembly (behind crisper drawers or back panel), disconnect tubing and wiring, install the new assembly, reconnect, and test for leaks. Flush 2–3 gallons of water post-installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your refrigerator running smoothly today! Add to cart now for a budget-friendly fix!

Read more less

5303917625CM Refrigerator Defrost Thermostat L47-22F tube mount with bullet connectors. Fits Electrolux refrigerator. Replaces Part Numbers: 5303917625, 08000805, 3001234, 3015138, 3916083, 5308000805, 636974, 8000805, AH468968, EA468968, G000166153, AP2592599, PS468968.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less