XPARTCO 5300622034 Dryer Heating Element Coil (Restring)
The XPARTCO 5300622034 is an aftermarket replacement heating coil, sold as a restring, for Frigidaire-built electric dryers. A restring replaces the burned-out coil inside your dryer's existing heater housing, so you do not need to replace the whole heater assembly. It is a cost-saving repair for a dryer that runs but no longer makes heat.
This is a direct-fit aftermarket replacement for the original Frigidaire coil. It has 5/16" terminals. A version with 1/4" terminals has a different part number, so check the terminals on your old coil before ordering.
Quick Answer
The XPARTCO 5300622034 Heating Element Coil fixes a Frigidaire, Tappan, White-Westinghouse, Gibson, or Kelvinator electric dryer that tumbles but doesn't heat, or heats weakly. It restrings the existing element housing with 5/16" terminals. Classic symptom: the drum spins and the timer runs, but clothes come out cold and damp.
Common Problems This Part Fixes
Dryer runs but produces no heat
Clothes come out damp after a full cycle
Dryer heats weakly or takes very long to dry
Visible break or burn in the heating coil
Coil failure confirmed by a continuity test
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This heating element coil directly replaces the following part number:
5300622034, 137392700C, AFR16756, AH451032, AP2135128, EA451032, OEM6405393, EAP451032, PD00000199, PS451032
No other Frigidaire part numbers were confirmed for this coil. A similar restring with 1/4" terminals is sold under a different number and is not interchangeable. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This coil is listed for Frigidaire, Tappan, White-Westinghouse, Gibson, Kelvinator, and GE electric dryers, including these examples:
DE27A8WAFC, DE27S8WAGC, DE600ADD3, DE600ADW3
F31C336CS0, F31C546CS0, F31C747CS0
FDE116RBW0, FDE216RBS0, FDE336RBS0, FDE436RBS0, FDE546RBS0
Note: The models above are a sample of a much longer list, not a full list. This coil has 5/16" terminals. Dryers using a 1/4" terminal coil need a different part, so compare the terminals on your old element before ordering, or contact our support team to verify fit.
Key Features
Direct-fit aftermarket heating coil for Frigidaire-built electric dryers
Restring design reuses your existing heater housing
5/16" terminals
Resolves no-heat and weak-heat problems caused by a failed coil
Fits many Frigidaire, Tappan, White-Westinghouse, Gibson, and Kelvinator models
Product Specifications
Part Number
XP5300622034
OEM Part Number
5300622034
Part Type
Dryer Heating Element Coil (Restring)
Condition
Aftermarket Replacement
Terminal Size
5/16"
Application
Frigidaire-Built Electric Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning. Wear work gloves, as the cabinet and heater housing edges are sharp. Remove the panel that gives access to the heater housing per your model's service guide, and disconnect the wires, noting their positions. Remove the old coil and install the new one following the original coil's path through the insulators, then reassemble. Before testing, make sure no part of the coil touches the metal housing. Clean the lint trap and check the exhaust vent for restrictions, since poor airflow shortens element life.
Frequently Asked Questions
My dryer spins but won't heat. Is this the part I need?
A burned-out heating coil is a common cause. Unplug the dryer and test the element for continuity first. If there is no continuity, the coil has failed. A tripped thermal fuse or a failed thermostat can cause the same symptom, so check those too.
What is a restring?
A restring is a replacement coil that you install in your dryer's existing heater housing, instead of replacing the entire heater assembly. It is usually the lower-cost repair if the housing is in good condition.
What are the terminal sizes?
This coil has 5/16" terminals. A similar coil with 1/4" terminals has a different part number, so compare the terminals on your old element before ordering.
Will this fit my dryer?
It is listed for many Frigidaire-built electric dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
5301EL1001J Dryer Genuine Heating Element
Fits Specific LG Dryer Models.
240V, 5400W complete assembly with housing and thermostats
Replaces Part Numbers: 5301EL1001J, 5301EL1001A, 1377645, AEG72910307, AH3527791, AP4439759, EA3527791, PS3527791, 5301EL1001H, 1377645, 5301EL1001E, 5301EL1001G, 5301EL1001S, 5301EL1001U, 5301EL1001W, AH3527790, AP5072170, EA3527790, PS3527790, AEG72910301, AP5669354, AEG72910309, AP7211081.
Description: This Heater Assembly is a Genuine OEM part for specific LG dryer models. This component is responsible for generating the heat required to dry clothes effectively. It consists of a heating element and necessary components that work together to maintain the desired drying temperature, ensuring clothes come out dry and ready to wear. Causes of a bad heater assembly can include wear and tear from regular use, overheating, electrical issues, or damage to the heating element itself. A malfunctioning heater assembly can lead to inefficient drying or no heat at all.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.go
279973 Dryer Genuine OEM Thermostat Kit
Replaces: 279973, 279973VP, 3391913, 3404151, 3404152, 3977395, 8318314, 897710, ER279973, AH334387, AP3094323, EA334387, PS334387.
Description: This Thermal Cut-Off Kit is a Genuine OEM part for select Kenmore, Whirlpool dryer models, responsible for protecting the dryer from overheating by interrupting the power flow to the heating element if the dryer air temperature reaches a dangerously high level.
XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F) – Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from extreme overheating with the XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F), Normally Closed. This high-temperature safety device is designed to remain closed (conductive) during normal operation and open permanently when internal temperatures exceed 180℃, immediately cutting power to prevent serious damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe and reliable operation.
Replaces Part Numbers
XPMTC-180, MTC-180, Microwave Thermal Fuse 180C NC, 356F Normally Closed Thermal Cutoff, WB24X29270, 4586233, PD00045446, EAP12170419, KSD1 BR1 180, AP6262395, PS12170419, 6930W1A003X, 1365203, AH3530468, EA3530468, PD00001857, AP4443816, PS3530468.
Compatibility
This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 180℃ (356°F) NC thermal cutoff.
Commonly used near the magnetron, high-heat zones, or cavity protection points.
Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure.
🔍 What’s the Difference Between NC and NO Thermal Cut-Offs?
Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC.
Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs).
⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications
🌡️ 180℃ (356°F) Rating – Designed for high-temperature protection zones
🔁 Normally Closed (NC) – Conducts power during normal operation
🛡️ Critical Safety Component – Prevents overheating and fire hazards
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs
📐 Product Specification
Part Number: XPMTC-180
Component Type: Microwave Thermal Cut-Off Fuse
Temperature Rating: 180℃ (356°F)
Contact Type: Normally Closed (NC)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Magnetron or high-heat cavity temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal cut-off near the magnetron or high-heat area.
Disconnect wiring and remove the failed fuse.
Install the new XPMTC-180 (NC) thermal cut-off in the same position.
Reassemble the microwave and restore power.
Test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety under extreme heat conditions — Add to Cart Now for a dependable, budget-friendly repair!
XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F) – Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from overheating with the XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F), Normally Closed. This high-quality aftermarket safety device remains closed (conductive) during normal operation and opens permanently when internal temperatures exceed 120℃, cutting power to prevent component damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe operation and proper protection.
Replaces Part Numbers
XPMTC-120, MTC-120, KSD-120LC, Microwave Thermal Fuse 120C NC, 248F Normally Closed Thermal Cutoff, WB27X1127, 254709, AH239811, EA239811, WB21X0535, WB21X535, PD00023089, EAP239811, AP2026352, PS239811, WB21X10162, 1556022, AH2370041, EA2370041, KSD 120LC, PD00037108, EAP2370041, AP4484224, PS2370041, 5304509474, 5304464093, 4583662, PD00042646, EAP12071309, AP6230621, PS12071309, WB27X11212, 3026293, SE-7350-006, WB24X28948, WB27X10854, PD00044723, EAP8754627, AP5791056, PS8754627, DE47-20059B, 2079767, DE47-20059A, PD00005107, EAP4226453, AP4580112, PS4226453, DE47-20060A, 2079768, PD00036362, EAP4226454, AP4220155, PS4226454, WB27X10567, 946799, AH239709, PD00050529, EA239709, AP3192016, PS239709.
Compatibility
This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 120℃ (248°F) NC thermal cutoff.
Commonly used in countertop, over-the-range, and built-in microwave models.
Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure.
🔍 What’s the Difference Between NC and NO Thermal Cut-Offs?
Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC.
Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs).
⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications
🌡️ 120℃ (248°F) Rating – Trips at unsafe temperature levels
🔁 Normally Closed (NC) – Conducts power during normal operation
🛡️ Critical Safety Component – Helps prevent overheating and fire hazards
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs
📐 Product Specification
Part Number: XPMTC-120
Component Type: Microwave Thermal Cut-Off Fuse
Temperature Rating: 120℃ (248°F)
Contact Type: Normally Closed (NC)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Magnetron or microwave cavity temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal cut-off near the magnetron or cavity.
Disconnect wiring and remove the failed fuse.
Install the new XPMTC-120 (NC) thermal cut-off in the same position.
Reassemble the microwave and restore power.
Test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!
Genuine OEM WPW10185972 Dryer Timer
The Genuine OEM Whirlpool WPW10185972 is the dryer timer, the electromechanical control that advances through your dryer's preset cycles. Its internal contacts open and close the circuits that control heat and the drum motor, so the dryer runs for the right amount of time at the right setting. When the timer fails, the dryer may not start, may not advance through the cycle, or may over-dry or under-dry your clothes.
This is the original Whirlpool part, also sold under the older number W10185972. It is listed for Whirlpool-built electric dryers sold as Whirlpool, Maytag, Amana, Admiral, Roper, Inglis, and Crosley. Check the part number before ordering, because a similar timer, WPW10185971, is listed for different models.
Quick Answer
The Genuine OEM WPW10185972 Dryer Timer fixes a Whirlpool-built electric dryer that won't start, won't advance through its cycle, or over-dries or under-dries because the timer has failed. It is also listed as W10185972. Classic symptom: the dial turns but the dryer doesn't run or doesn't engage all the cycle selections.
Common Problems This Part Fixes
Dryer won't start or won't turn on
Dryer doesn't engage all cycle selections
Dryer over-dries or under-dries clothes
Timer dial doesn't advance through the cycle
Heat or motor runs at the wrong time in the cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer directly replaces the following part numbers:
WPW10185972, W10185972, 1481701, WPW10185972VP, 418-617-20-B5, AP6016537, AWP49431, EAP11749827, PD00002683, PS11749827
W10185972 is the older Whirlpool number. No other cross-reference numbers were confirmed. The similar timer WPW10185971 is a different part and is not listed as interchangeable. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This timer is listed for Whirlpool, Maytag, Amana, Admiral, Roper, Inglis, and Crosley electric dryers, including these examples:
Whirlpool 4KWED4750BQ1, Maytag 4KMEDC100BQ1, Amana 4KNED4400BQ1, Amana NED5100TQ1
Admiral AED4475TQ1, YAED4475TQ1, Crosley CEDX631VQ1
Inglis IED4400VQ1, YIED4400VQ1, Roper RED4400VQ1, RED4440VQ1, YRED4340SQ2
Note: The models above are a sample from one retailer, not a full list. A similar timer, WPW10185971, is listed for different dryer models (such as Admiral AGD4475TQ1 and Amana NGD5100TQ1), so check which number your model calls out. Confirm your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool dryer timer
Advances through preset cycles and switches heat and motor circuits
Also listed under the older number W10185972
Resolves no-start, cycle-advance, and over- or under-drying problems
Fits Whirlpool-built electric dryers sold under many brand names
Product Specifications
Part Number
WPW10185972
OEM Part Number
WPW10185972
Part Type
Dryer Timer
Condition
Genuine OEM
Application
Whirlpool-Built Electric Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning, and wear work gloves. Remove the control panel as shown in your model's service guide to reach the timer. Before disconnecting anything, photograph the wire connections or note the position of each wire, since the timer has many terminals. Move the wires one at a time to the new timer, mount it, replace the knob, and restore power. Test each cycle selection before closing the dryer.
Frequently Asked Questions
My dryer won't start. Is this the part I need?
A failed timer is a common cause, especially if the dial turns but the dryer doesn't run or doesn't engage every cycle selection. The door switch, start switch, and thermal fuse can cause the same symptom, so check those first.
Is WPW10185972 the same as W10185972?
Yes. W10185972 is the older Whirlpool number for the same timer, and this part covers both numbers.
Can I use WPW10185971 instead?
No, don't assume so. WPW10185971 is a separate timer listed for different models. Use the number your model calls out, or contact our support team to confirm before ordering.
Will this fit my dryer?
It is listed for many Whirlpool-built electric dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPMTC-100 Microwave Thermal Cut-Off Fuse 100℃ (212°F) – Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from overheating with the XPMTC-100 Microwave Thermal Cut-Off Fuse 100℃ (212°F), Normally Closed. This high-quality aftermarket safety device is designed to remain closed (conductive) during normal operation and open permanently when temperatures exceed 100℃, cutting power to prevent damage or fire risk. A failed or tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with this correctly rated normally closed fuse restores safe operation and proper protection.
Replaces Part Numbers
XPMTC-100, MTC-100, Microwave Thermal Fuse 100C NC, 212F Normally Closed Thermal Cutoff, KSD-100LC, WB27X11094, 1556167, AH2370184, EA2370184, PD00044040, EAP2370184, AP4484359, PS2370184, WB27X10909, 1262954, AH1481222, EA1481222, PD00075864, EAP1481222, AP3994059, PS1481222, DE47-20196C, 2079793, DE47-20196A, PD00023369, AP4580114, PS4226487, 5304456094, 1198238, AH1532498, PD00083148, EA1532498, AP3960659, PS1532498.
Compatibility
This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 100℃ (212°F) NC thermal cutoff.
Commonly used in countertop, over-the-range, and built-in microwave models.
Always verify temperature rating and NC (Normally Closed) configuration before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications
🌡️ 100℃ (212°F) Rating – Trips at unsafe temperature levels
🔁 Normally Closed (NC) – Conducts power during normal operation
🛡️ Critical Safety Component – Prevents overheating and fire hazards
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs
📐 Product Specification
Part Number: XPMTC-100
Component Type: Microwave Thermal Cut-Off Fuse
Temperature Rating: 100℃ (212°F)
Contact Type: Normally Closed (NC)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Magnetron or microwave cavity temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal cut-off near the magnetron or cavity.
Disconnect wiring and remove the failed fuse.
Install the new XPMTC-100 (NC) thermal cut-off in the same position.
Reassemble the microwave and restore power.
Test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!
XPARTCO 3977767 Dryer Hi Limit Thermostat
250 -80F Limit Thermostat.
Fits specific Maytag, Kenmore, Whirlpool dryer models.
Replaces Part Number: WP3977767, 3977767, 3399693, ER3977767, SET185, TJ90SET185, WP3977767VP, AP6009043, PS11742185.
Description: This Hi-Limit Thermostat is a replacement part for specific Maytag, Kenmore, Whirlpool dryer models. It functions as a critical safety device that monitors and controls the temperature within the dryer, preventing it from overheating. When the dryer reaches a temperature that is too high, this thermostat will cut off the power to the heating element to mitigate the risk of fire.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO EXP571 Dryer Door Catch
The XPARTCO EXP571 is an aftermarket replacement door catch for electric and gas dryers from Whirlpool, Maytag, Kenmore, Frigidaire, Electrolux, GE, Amana, Crosley, White-Westinghouse, and LG. The door catch is the small plastic part the dryer door latches onto to stay securely shut during a cycle. Keeping the door tightly closed holds heat and airflow inside the drum, so clothes dry efficiently. Over time, regular wear, physical damage, or a door that has drifted out of alignment can cause the catch to crack, wear down, or lose its grip, and the door stops latching reliably.
Made from durable plastic, this is a direct-fit replacement with a simple snap-in installation — no tools required. Because the same catch design was used across several appliance families, it carries a long cross-reference list spanning Whirlpool, Frigidaire, and GE part numbers; see the Replaces list below. Each order includes 1 door catch.
Quick Answer
The XPARTCO EXP571 Dryer Door Catch fixes a dryer door that won't stay closed, won't latch properly, or pops open during a cycle because the catch is cracked, worn, or damaged. Durable plastic, snap-in install with no tools, 1 catch per order. Fits Whirlpool, Maytag, Kenmore, Frigidaire, Electrolux, GE, Amana, Crosley, White-Westinghouse, and LG dryers. Classic symptom: you have to push or hold the door shut, or it swings open mid-cycle and heat escapes.
Common Problems This Part Fixes
Dryer door won't stay closed or pops open during a cycle
Door doesn't latch with a firm, positive click
Visibly cracked, broken, or worn catch
Heat escaping around the door, leaving clothes damp after a full cycle
Door feels loose or misaligned when closed
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door catch directly replaces the following part numbers:
WP71002106, WP3389441, 3389441, 71002106, AWP47565, PD00004499, AP6010685, PS11743869, AP6008299, PS11741434, WE1X1195, AGE1230465, AP2042209, PS266896, 131658800, AFR14189, AP2107362, PD00000626, PS418433, 5307521419, 10690002, 10690001, AFR14189, AP4450746, PD00000626, PS418433
This one catch design was sold under the part numbers of several manufacturers: Whirlpool/Maytag (WP71002106, WP3389441), Frigidaire/Electrolux (131658800, 5307521419), and GE (WE1X1195, WE1X1153, WE01X10023, and related). The AP/PS-prefixed numbers are third-party catalog cross-references for the same physical part.
Compatibility
This door catch is used on dryer models from the following brands:
Whirlpool, Maytag, Amana, and Kenmore (Whirlpool-built) dryers
Frigidaire, Electrolux, Crosley, White-Westinghouse, and Kenmore (Frigidaire-built) dryers
GE dryers
Select LG dryers
Note: Because this catch was used across so many brands and model years, a full model-number list can't be shown here. The safest way to confirm fit is to match the number on your old catch, or on your dryer's parts diagram, against the Replaces list above rather than relying on brand alone. Contact our support team with your model number and we'll verify before you order.
Key Features
Aftermarket replacement dryer door catch
Durable plastic construction for long-lasting use
Simple snap-in installation — no tools required
Holds the door securely closed to keep heat and airflow in the drum
Cross-references to Whirlpool, Frigidaire, GE, and other OEM numbering
1 door catch per order
Product Specifications
Part Number
EXP571
OEM Part Number
WP71002106, 131658800, WE1X1195
Part Type
Dryer Door Catch
Condition
Aftermarket Replacement
Material
Plastic
Quantity
1 Door Catch
Installation
Snap-In, No Tools Required
Application
Whirlpool, Maytag, Kenmore, Frigidaire, Electrolux, GE, Amana, Crosley, White-Westinghouse & LG Dryers
Installation Notes
ℹ️ No Tools Required Unplug the dryer before starting as a general safety precaution. Open the dryer door and locate the worn or broken catch the door latches onto. Pull or pry the old catch free from its mounting position, then press the new catch into the same opening until it snaps firmly into place. Close the door and confirm it latches with a positive click and stays shut. If the door still won't seat or latch evenly after the swap, check the door's alignment and hinges, since a misaligned door can wear out a new catch quickly.
Frequently Asked Questions
My dryer door won't stay shut — is this the part I need?
Very likely. A cracked, worn, or damaged door catch is a common reason a dryer door won't latch or pops open mid-cycle. Inspect the old catch for cracks or wear; if it looks damaged, replacing it should restore a firm latch.
Will this fit my dryer? I have a Whirlpool, Frigidaire, or GE.
This catch is cross-referenced to part numbers from all three families, plus several others. Match the number on your old catch or your dryer's parts diagram against the Replaces list above. If you're unsure, contact our support team with your model number and we'll confirm fit before you order.
Do I need tools to install it?
No. It's a simple snap-in design — remove the old catch and press the new one into place until it clicks.
How many catches come in this order?
Each order includes 1 door catch.
The door still doesn't close right after replacing the catch. What else could be wrong?
A door that has drifted out of alignment can keep a new catch from seating properly and wear it out fast. Check the door hinges and alignment against the cabinet opening.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WP8544772 Dryer Genuine OEM Heating Element
Replaces part Numbers: WP8544772, 8544772, 1180055, AP6013116, PS11746338.
Restore your dryer’s heating performance with the WP8544772 Heating Element. This Genuine OEM part is designed to provide consistent, efficient heat for drying your clothes quickly and evenly.
Key Features:
✅ Genuine OEM Part – built for performance and durability
🔁 Replaces: WP8544772, 8544772, 1180055, AP6013116, PS11746338.
🔥 Produces the necessary heat for drying cycles
🛠️ Fits select Whirlpool, Kenmore, Maytag, Amana, and Crosley dryers
🧰 Easy to install – plug-and-play direct replacement
⚠️ Unplug dryer before servicing. Need help confirming fit? We’re here to assist!
📦 Part Number: WP8544772💯 30-Day Money Back Guarantee
XPARTCO WE04X24719 Dryer Start Button
The XPARTCO WE04X24719 is an aftermarket replacement power and start button assembly for GE and Hotpoint dryers. You push it to power up the dryer's controls and begin the drying cycle. When the button is cracked, stuck, or no longer registers a press, the dryer won't start, even though the rest of the machine is fine.
This is a direct-fit aftermarket replacement for the original GE button assembly. The button mounts through the control panel and onto the switch shaft behind it, so if the dryer still won't start with a new button, the push-to-start switch itself may also need to be checked.
Quick Answer
The XPARTCO WE04X24719 Start Button fixes a GE or Hotpoint dryer whose start button is broken, stuck, or doesn't start the dryer when pressed. Classic symptom: you press start and nothing happens, or the button feels loose, cracked, or no longer springs back.
Common Problems This Part Fixes
Dryer won't start when the start button is pressed
Start button is cracked, broken, or missing
Button feels loose, stuck, or doesn't spring back
Button no longer lines up with the switch behind the panel
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This start button assembly directly replaces the following part number:
WE04X24719, AGE24894, AP6034220, EAP11766637, 4587500, PD00046802, PS11766637
No other GE part numbers were confirmed for this button. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This start button is listed for GE and Hotpoint dryers, including these examples:
5TX62E9ST0WS, ETD48EASW0WB
GTD33EASK0WW, GTD42EASJ2WW, GTD48EASW0WB
GTD45GASJ0WS (gas)
Note: The models above are a sample of about 40 listed dryers, not a full list. This is the button assembly that fits onto the switch shaft, not the switch itself. Confirm your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket power and start button assembly for GE and Hotpoint dryers
Restores a working push-to-start button
Fits electric and gas dryer models
Straightforward repair, typically 30 minutes to 1 hour
Product Specifications
Part Number
XPWE04X24719
OEM Part Number
WE04X24719
Part Type
Dryer Power and Start Button Assembly
Condition
Aftermarket Replacement
Application
GE & Hotpoint Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. The button is held to the switch behind the control panel, so you will need to remove the back panel, the wires, and the switch to take the old button out through the panel, as shown in your model's service guide. Note where each wire connects before removing it. Fit the new button through the panel onto the switch shaft, then reassemble in reverse order.
Frequently Asked Questions
My dryer won't start when I press the button. Is this the part I need?
If the button is cracked, loose, or doesn't press the switch, yes. If the button looks fine, the push-to-start switch behind it, the door switch, or a thermal fuse can cause the same symptom, so check those too.
Does this include the switch?
This listing is for the button assembly that fits onto the switch shaft, not the switch. If the switch itself has failed, it is a separate part.
Do I need to take the dryer apart?
Yes. The button is installed through the control panel, so the back panel, wires, and switch have to come off to replace it. Customers report about 30 minutes to 1 hour.
Will this fit my dryer?
It is listed for many GE and Hotpoint dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM Dryer Part
W11683629 Dryer Genuine OEM Thermistor
A manufacturer-approved temperature-sensing component designed to help the dryer control system regulate heat and drying performance.
Product Description
The W11683629 Dryer Genuine OEM Thermistor monitors air temperature inside the dryer and sends temperature information to the electronic control system. The control uses this signal to cycle the heat source and maintain the correct operating temperature during the drying cycle.
This is a Genuine OEM replacement part manufactured to the original equipment specifications for fit, electrical response, and dependable operation. Replacing a failed thermistor can help restore accurate temperature control, normal cycle times, and consistent drying results.
Quick Answer
W11683629 is a Genuine OEM dryer thermistor. It senses dryer air temperature and communicates with the control board so the appliance can regulate heating. Replace it when testing or diagnosis confirms an open, shorted, damaged, or inaccurate temperature sensor.
Common Problems This Part Fixes
Dryer overheats or runs hotter than normal
Clothes remain damp after a complete cycle
Drying cycles take too long
Heat cycles on and off incorrectly
Dryer stops before clothes are dry
Temperature-sensor or heating-related error codes
Replaces Part Number
The product title identifies the following part number:
W11683629, W11452857, AP7216892, AWP1400864, PS17216463.
No additional replacement or cross-reference number was included in the supplied product title.
Compatibility
Designed for select dryer models that specify Genuine OEM part number W11683629. Appliance parts can look similar while using different resistance ranges, connectors, mounting positions, or control logic.
Always verify the complete dryer model number and the required part number before ordering. The model-number label is commonly located around the door opening, on the cabinet frame, or on the rear identification plate.
Key Features
Genuine OEM manufacturer-approved component
Monitors dryer operating temperature
Sends temperature feedback to the control system
Helps regulate heating and cycle performance
Built to original fit and electrical specifications
Direct replacement when W11683629 is specified
Product Specifications
Part Number
W11683629
Part Type
Dryer Thermistor / Temperature Sensor
Condition
New
Quality
Genuine OEM
Application
Clothes Dryer
Primary Function
Measures air temperature for the dryer control system
Package Quantity
1 Thermistor
Troubleshooting Guide
Disconnect the dryer from electrical power before opening or servicing the cabinet.
Inspect the exhaust vent, lint path, and blower area. Restricted airflow can produce symptoms similar to a failed thermistor.
Inspect the thermistor body, terminals, connector, and wire harness for damage, corrosion, loose connections, or heat discoloration.
Disconnect the thermistor and test resistance with a multimeter. Compare the reading with the dryer service information for the measured temperature.
Warm or cool the sensor carefully. Resistance should change smoothly as temperature changes; an open circuit, short circuit, or unstable reading can indicate failure.
Check the heater circuit, thermal devices, moisture-sensing system, and control board when the thermistor tests within specification.
Safety: Do not bypass a thermistor or protective temperature device. Installation and diagnosis should be performed by a qualified person when you are not comfortable servicing electrical appliances.
When Should You Replace This Part?
The thermistor is open, shorted, or outside the specified resistance range
The sensor reading does not change correctly with temperature
The housing or connector is cracked, burned, or physically damaged
A service diagnostic identifies W11683629 as the failed component
Airflow and related heating components have been checked and the thermistor fails testing
Shop With Confidence
Purchase the correct Genuine OEM replacement part for dependable fit and performance. Verify your dryer model number before ordering, and contact our parts team when compatibility assistance is needed.
Genuine OEM Fast U.S. Shipping Compatibility Support Secure Checkout
