Search results for "filter housing"

XPARTCO DA81-06013A Refrigerator Evaporator Fan Motor The XPARTCO DA81-06013A is an aftermarket replacement evaporator fan motor compatible with a wide range of Samsung French door and bottom-mount refrigerators across the RF18, RF22, RF23, RF24, RF25, RF26, RF28, RF30, and RF34 series. The evaporator fan motor is the "heart" of the refrigerator's cooling cycle — it pulls air across the cold evaporator coils in the freezer section and circulates it throughout the freezer and fresh food compartments. This constant airflow is what keeps temperatures even and food fresh. When the fan motor fails, cooling efficiency drops, compartments run warm, frost can build up on the coils, and the ice maker may stop working properly. This is an axial evaporator fan and motor assembly with a 3-wire harness. Electrical specs: 12V DC, 0.16A. Frame dimensions: 3-5/8"L x 1-3/4"W x 3-5/8"H, with the harness and plug extending 10-3/4" from the frame. Black with a multi-colored harness, plastic and metal construction. It directly replaces DA31-00287A, U92C12MS1B3-52, 3612JL-04W-S49, 3967908, AP5914786, EAP9603956, PD00031112, and PS9603956. Important: Samsung uses several different evaporator fan motors across its refrigerator lineup with different connectors and voltages — always match your old motor's part number and connector before ordering. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO DA81-06013A Refrigerator Evaporator Fan Motor fixes Samsung French door and bottom-mount refrigerators where the fridge or freezer is too warm, cooling is poor, frost builds up on the evaporator coils, unusual noise comes from the freezer, or the ice maker stops working. Axial fan + motor assembly, 3-wire harness. 12V DC, 0.16A. Frame 3-5/8"L x 1-3/4"W x 3-5/8"H. Replaces DA31-00287A, U92C12MS1B3-52, 3612JL-04W-S49, 3967908, AP5914786, EAP9603956, PD00031112, PS9603956. Compatible with Samsung RF18/RF22/RF23/RF24/RF25/RF26/RF28/RF30/RF34 series. Match your old motor's connector before ordering — Samsung uses several different evaporator fan motors. Common Problems This Part Fixes Refrigerator or freezer section too warm — fan not circulating cold air Poor cooling effect — inadequate airflow across the evaporator coils Uneven or abnormal temperatures throughout the refrigerator Frost or ice buildup on the evaporator coils or in the freezer Unusual noise (grinding, squealing, clicking) from the freezer compartment — failing motor bearings or the blade rubbing on frost Ice maker not working properly due to inadequate cooling Refrigerator running continuously trying to compensate for poor air circulation Fan motor not spinning at all when the compressor is running Food spoiling faster than normal Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This evaporator fan motor directly replaces the following OEM and cross-reference part numbers: DA81-06013A, 3612JL-04W-S49, 3967908, DA31-00287A, MX9232ABM1, U92C12MS1B3-52, AP5914786, ASM1162115, EAP9603956, OEM17744367, PD00031112, PS9603956 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: Samsung uses several different evaporator fan motors with different connectors — verify your original motor's part number before ordering. Compatibility This evaporator fan motor is compatible with select Samsung French door and bottom-mount refrigerators, including: Samsung RF28 series — RF28HMEDBSR, RF28HFEDTSR, RF28HFEDBSR, RF28HDEDBSR, RF28HDEDPWW, RF28HFEDBSG, RF28HMEDBBC, RF28HMEDBWW, RF28JBEDBSG, RF28JBEDBSR, RF28R7201SR, RF28R6241SR series Samsung RF26 series — RF26HFENDSL, RF26HFENDSR, RF26HFENDWW, RF26HFENDBC, RF26J7500SR, RF26J7500BC, RF26J7500WW series Samsung RF25 series — RF25HMEDBSR, RF25HMEDBBC, RF25HMEDBSG series Samsung RF263 series — RF263BEAESR, RF263BEAESG, RF263BEAEBC, RF263TEAESR, RF263TEAESG, RF263TEAEBC, RF263TEAEWW series Samsung RF260/RF261/RF265 series — RF260BEAESR, RF260BEAESG, RF260BEAEWW, RF261BEAESR, RF261BEAEBC, RF261BEAEWW, RF265BEAESR, RF265BEAESG series Samsung RF23/RF24 series — RF23HCEDBSR, RF23HCEDTSR, RF23HTEDBSR, RF24FSEDBSR, RF24J9960S4 series Samsung RF22/RF30/RF32/RF34/RF42 series — RF22KREDBSR, RF22KREDBSG, RF22NPEDBSR, RF22NPEDBSG, RF30HBEDBSR, RF30KMEDBSR, RF323TEDBSR, RF323TEDBBC, RF4267HARS series Samsung RF18 series — RF18HFENBSR and related bottom-mount models Important — Match Your Connector Before Ordering: Samsung uses several different evaporator fan motors across its refrigerator lineup, with different voltages (12V DC here) and connector styles. This DA81-06013A is a 12V DC motor with a 3-wire harness. Before ordering, compare your old motor's part number and connector to this part — a similar-looking motor with a different connector or voltage (such as the BLDC DA31-00342A used in some RS-series models) is NOT interchangeable. Contact our support team with your model number if you're unsure. Key Features Evaporator fan motor — pulls air across the evaporator coils and circulates it through the freezer and fresh food compartments for even cooling Resolves "too warm," "poor cooling," "frost buildup," "noisy freezer," and "ice maker not working" symptoms when caused by fan motor failure Axial evaporator fan and motor assembly with 3-wire harness Electrical specs: 12V DC, 0.16A Frame dimensions: 3-5/8"L x 1-3/4"W x 3-5/8"H · harness and plug extend 10-3/4" from the frame Black with multi-colored harness, durable plastic and metal construction No software or firmware update required — direct drop-in replacement Replaces DA31-00287A, U92C12MS1B3-52, 3612JL-04W-S49, 3967908, AP5914786, EAP9603956, PD00031112, and PS9603956 Compatible with Samsung RF18/RF22/RF23/RF24/RF25/RF26/RF28/RF30/RF34 series French door and bottom-mount refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number DA81-06013A Part Type Refrigerator Evaporator Fan Motor Assembly Condition Aftermarket Replacement Application French Door & Bottom-Mount Refrigerators (Samsung platform) Fan Type Axial evaporator fan Voltage 12V DC Current 0.16A Wiring 3-wire harness Frame Dimensions 3-5/8"L x 1-3/4"W x 3-5/8"H Harness/Plug Reach 10-3/4" from frame Color Black with multi-colored harness Material Plastic / Metal Location Freezer section, behind rear evaporator panel Compatible Brands Samsung Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves — Match the Connector Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located in the freezer section behind the rear access panel. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access to the back wall. If there's frost or ice buildup on the rear panel or coils, allow the freezer to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily. Remove the screws securing the rear evaporator access panel and lift it away to expose the fan motor. Photograph the wiring harness connection and fan motor orientation before disconnecting anything. Before installing, compare the new motor's connector and part number to your old one — they must match. Disconnect the wiring harness by gently pulling the plug, and remove the two mounting screws holding the fan motor assembly in place. Remove the old motor. Install the new DA81-06013A in the same position and orientation, secure with the two mounting screws, and reconnect the wiring harness by firmly pushing the plug in until it seats. Confirm the fan blade spins freely by hand without rubbing on any surrounding surface. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. No software or firmware update is required. Tools needed: Phillips screwdriver (or electric screwdriver), work gloves. Frequently Asked Questions How do I know if my evaporator fan motor has failed? The most common signs are a refrigerator or freezer that's too warm despite the compressor running, poor or uneven cooling, and frost building up on the evaporator coils because air isn't being circulated. You may also hear unusual noise (grinding, squealing, or clicking) from the freezer compartment as the motor bearings fail or the blade rubs on accumulated frost. To confirm: with the refrigerator running, open the freezer and listen/look for the fan behind the rear panel — if it's not spinning while the compressor runs, or it's making noise, the motor has likely failed. You can also test the motor with a 12V DC power source; a working motor will spin when powered. Samsung has several similar-looking fan motors — how do I know this is the right one? This is the critical thing to get right. Samsung uses several different evaporator fan motors across its refrigerator lineup, and while they look similar, they differ in voltage and connector style and are NOT interchangeable. The DA81-06013A is a 12V DC motor with a 3-wire harness, used across the RF18/RF22/RF23/RF24/RF25/RF26/RF28/RF30/RF34 French door and bottom-mount series. A different motor — such as the BLDC DA31-00342A used in some RS-series side-by-side models — has a different connector and won't work here. Before ordering, find the part number printed on your old motor, or match your refrigerator's model number against the compatibility list. When in doubt, send us your model number and we'll confirm. Do I need to update any software or firmware after installing this? No — this is a simple mechanical fan motor with no electronics that require programming. Unlike some Samsung refrigerator control boards or main PCBs, the evaporator fan motor is a direct drop-in replacement: disconnect the old one, connect the new one, and it works immediately. There's no pairing, calibration, or firmware update needed. Just make sure the connector matches and the fan blade spins freely after installation. Should I defrost the freezer before installing this? If there's frost or ice buildup on the rear freezer panel or evaporator coils, yes — clear it before installing the new motor. Leave the freezer empty and unplugged with the door open for several hours (longer for heavy ice) to let everything thaw naturally, with towels at the base to catch melt water. Never chip or pry ice off the evaporator coils with a tool — the aluminum fins are delicate and a damaged coil is a far more expensive repair. If heavy frost keeps returning after the fan motor is replaced, the defrost system (defrost heater, sensor, or control) should be investigated as a secondary issue. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 0.16A), 3-wire harness, connector, frame dimensions (3-5/8"L x 1-3/4"W x 3-5/8"H), and cooling function of the original DA81-06013A evaporator fan motor used in compatible Samsung French door and bottom-mount refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO Refrigerator Replacement Part XPARTCO W10515058B Refrigerator LED Light Driver Board for WPW10515058 Aftermarket LED driver/circuit board only for compatible 2-plug WPW10515058-style refrigerator light assemblies. Product Overview The XPARTCO W10515058B Refrigerator LED Light Driver Board is an aftermarket replacement circuit/driver board for select refrigerator light assemblies that use the WPW10515058 / W10515058 2-plug configuration. Board only: the plastic light housing and lens/cover are not included. Quick Answer Use W10515058B when the compatible WPW10515058-style light assembly has a failed electronic board but the existing housing and lens can be reused. Verify your original part number and connector configuration before ordering. Common Problems This Part May Fix Refrigerator interior LED light does not illuminate LED light flickers or operates intermittently Light remains dim despite a good connection Existing light housing and lens are reusable but the electronic board has failed Replaces and Cross-References WPW10515058, W10515058, W10465957, W10522611, AP6022534, AWP993990, EAP11755867, PD00030078, PS11755867 These numbers identify the compatible OEM light assembly family. W10515058B is an XPARTCO aftermarket driver board only, not the complete Whirlpool light housing/lens assembly. Compatibility Designed for refrigerators that use the WPW10515058 2-plug LED light assembly. Compatible model examples include: MSF25D4MDE03 MSF21D4MDH00 MSF25D4MDM02 WRS325FDAB02 WRS325FDAM04 KSF22C4CYY01 106.41122211 106.51139214 106.51799411 106.41152211 106.51722410 106.41159211 Important: Partial model list only. Confirm the complete refrigerator model and original light part number before ordering. WPW10515058 uses a 2-plug configuration; WPW10515057 is a different 1-plug light and should not be substituted by appearance alone. Key Features XPARTCO aftermarket replacement Electronic LED driver/circuit board only For compatible WPW10515058 2-plug light assemblies Allows reuse of the original housing and lens when serviceable Designed for select Whirlpool-built refrigerator platforms Product Specifications XPARTCO Part Number W10515058B Part Type Refrigerator LED Light Driver / Circuit Board Brand XPARTCO Condition New Replacement Type Aftermarket Compatible OEM Assembly WPW10515058 / W10515058 Connector Family 2-Plug WPW10515058 Style Housing Included No Lens / Cover Included No Package Quantity 1 Driver Board Installation Notes Disconnect refrigerator power before service. Remove the existing LED light assembly according to the appliance service procedure. Confirm the original assembly is WPW10515058 / W10515058 or a verified equivalent and uses the 2-plug configuration. Transfer the replacement board into the existing serviceable housing/lens as applicable. Reconnect wiring securely and reinstall the light assembly. Restore power and verify proper lighting operation. Diagnostic note: Multiple dark or flickering refrigerator LEDs can sometimes be caused by another failed module, wiring problem, or control issue. Diagnose the lighting circuit before replacing parts unnecessarily. Frequently Asked Questions Does W10515058B include the plastic light housing and lens? No. This listing is for the LED driver/circuit board only. Reuse your existing housing and lens if they are in serviceable condition. Does it replace WPW10515058? It is designed as a board-only aftermarket repair option for compatible WPW10515058-style 2-plug light assemblies. It is not a complete OEM light assembly. Is this the same as WPW10515057? No. WPW10515057 is the similar 1-plug light family. WPW10515058 is the 2-plug family. Is this Genuine Whirlpool OEM? No. W10515058B is an XPARTCO aftermarket replacement board. Shop With Confidence Verify your refrigerator model, original light part number, and connector configuration before ordering. XPARTCO ReplacementBoard Only2-Plug Light FamilyCompatibility Support

Read more less

17438000001373 Washer Genuine OEM Water Level Sensor Assembly – Compatible with Midea, Insignia Washers Product Description Restore accurate water level detection and optimal washing performance with the 17438000001373 Washer Genuine OEM Water Level Sensor Assembly. This factory-original OEM sensor monitors water levels inside the washer and communicates with the control board to regulate fill cycles and ensure proper operation. A faulty sensor can lead to overfilling, underfilling, or cycles not completing correctly. Replacing it with this Genuine OEM assembly ensures precise sensing, proper communication with the control system, and long-lasting reliability. This part is manufactured to original factory specifications for dependable washer performance. Replaces Part Numbers 17438000001373, 302421600037, PS18188481 (verify if needed) Compatibility This Genuine OEM washer water level sensor assembly fits select Midea, Insignia washers. Common compatible models include (but are not limited to): Midea MAD160S2801GPSFMUS13, MLV41N1AWW, MAD160S2801PS, CTW41N1AW, MLV41N1AWWC, CLAWI47W, ATLMW41, CTW45N1AW, CTW45N2AW, CTW45N2AW, CTW45N1AW Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🏭 Genuine OEM Part – Manufactured to original factory specifications 💧 Accurate Water Level Detection – Ensures proper fill and cycle control ⚙️ Fixes Common Issues – Resolves overfill, underfill, and sensor errors 🧩 Complete Sensor Assembly – Ready for direct installation 💪 Reliable Performance – Designed for long-term durability ⚠️ Symptoms If your washer is experiencing any of the following issues, this part may need replacement: 💧 Washer overfilling or underfilling ⚠️ Incorrect water levels during cycles 🔄 Cycle not completing properly 🛑 Washer stopping mid-cycle 🚫 Continuous filling or no fill condition Replacing this sensor assembly can restore proper water level control and washer operation. 📐 Product Specification Part Number: 17438000001373 Component Type: Washer Water Level Sensor Assembly Function: Detects water level and communicates with control board Connection Type: Electrical connector + pressure sensing system Application: Washer fill and cycle control system OEM Status: Genuine OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock. Basic Steps: Disconnect washer power. Access the control panel or top panel. Locate the water level sensor assembly. Disconnect wiring and any attached pressure hose. Remove mounting screws and remove the old sensor. Install the new 17438000001373 Genuine OEM sensor. Reconnect wiring, reassemble, and restore power. Run a test cycle to confirm proper operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🏭 Genuine OEM Appliance Part 🚚 Free Shipping on All Orders 🔄 30-Day Return Policy Restore factory-level washer performance and accurate water control — Add to Cart Now with confidence!

Read more less

Genuine OEM AJU75152601 Washer Water Inlet Valve The Genuine OEM LG AJU75152601 is the water inlet valve assembly (also called a fill valve) for select LG and Kenmore washers. The valve controls the flow of hot and cold water into the washer. When it fails, the washer may not fill, may not stop filling, may leak, or may give no hot or cold water. This is the original LG part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering, because similar LG valves look alike but can differ in size and shape. Quick Answer The Genuine OEM AJU75152601 Water Inlet Valve replaces the inlet valve on a compatible LG or Kenmore washer when it has failed. Replaces AJU73213301. Classic symptoms: the washer won't fill or won't stop filling, leaks, or gives no hot or cold water. Common Problems This Part Fixes Washer won't fill with water Washer won't stop filling Leaking water No hot water or no cold water Washer won't start Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This water inlet valve replaces or supersedes the following part numbers: 5221EA1008F, AJU73213301, AJU75152601, AH3527446, AJU75152603, EA3527446, PS3527446, ALG53778, AP6308239, PD00042814, PS12374721, TAW35618287 If your old valve shows a different number, contact our support team and we'll check whether it matches. Compatibility This water inlet valve is listed for LG and Kenmore top-load washers, including these examples: LG WT1501CW, WT1701CV, WT1701CW, WT1801HVA, WT1801HWA, WT1901CW LG WT5270CW, WT7050CV, WT7200CV, WT7200CW, WT7500CW LG WT7600HKA, WT7600HVA, WT7600HWA, WT7840CW LG 31433, 31552 Note: The models above are a sample, not a full list. LG sells similar inlet valves under other part numbers that look alike but can differ in size and shape. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Genuine OEM LG part, not an aftermarket equivalent Controls the flow of water into the washer Usually located at the back of the washer Sold individually Product Specifications Part Number AJU75152601 OEM Part Number AJU75152601 Part Type Washer Water Inlet Valve Assembly Condition Genuine OEM Manufacturer LG Quantity 1 Valve Application Select LG and Kenmore Top-Load Washers Installation Notes ⚠️ Disconnect Power And Water Before Installing Unplug the washer and turn off the water supply before you begin. The valve is usually at the back of the washer, so you will need to remove the top cover, which is held by snap tabs and hidden screws, so pry carefully to avoid cracking it. Note where the hoses and connectors go and disconnect them, then remove the old valve. Install the new valve in the same position, reconnect the hoses and connectors, and reassemble. Restore power and water, check for leaks, and run a test cycle. Frequently Asked Questions My washer won't fill or won't stop filling. Is this the part I need? It can be, but other parts can cause the same symptoms. Check that both water supplies are on and the hose screens are clear first. Some customers also replaced the water level pressure switch at the same time, so confirm the valve is at fault. Is this an OEM or aftermarket part? This is a genuine OEM part from LG, not an aftermarket equivalent. Does this replace AJU73213301? Retailers list AJU73213301 as a number this valve replaces. If your valve shows another number, contact our support team and we'll check it. Will this fit my washer? It is listed for many LG and Kenmore top-load models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W11224591 Refrigerator Evaporator Fan Motor The XPARTCO W11224591 is an aftermarket replacement freezer evaporator fan motor assembly compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore bottom-mount French door refrigerators. The evaporator fan motor is located in the freezer compartment behind the rear panel — it draws cold air across the evaporator coils and circulates it throughout both the freezer and the fresh food compartment. This constant air movement is what keeps temperatures even and food fresh. When the fan motor fails, the most common symptom is telling: the refrigerator (fresh food) compartment stops cooling while the freezer stays cold but doesn't reach full capacity, because the fan is no longer moving the cold air up into the fridge section. This is a complete assembly that includes the fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat — everything integrated into one replaceable unit. Finished in white. As a direct replacement for the Whirlpool W11224591, it also replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521. Motor failure typically results from normal wear, obstruction from frost or debris rubbing the fan blade, or motor winding issues. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO W11224591 Refrigerator Evaporator Fan Motor fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, and Amana bottom-mount French door refrigerators where the fridge section is warm but the freezer is cold, temperatures are uneven, frost builds up on the coils, or unusual noise comes from the freezer compartment. Complete assembly — includes fan motor, wiring harness, temperature sensor, and defrost thermostat. White finish. Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, PS12349521. Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series and related models. Common Problems This Part Fixes Refrigerator (fresh food) compartment warm while the freezer stays cold — the signature symptom of evaporator fan motor failure Uneven or inconsistent temperatures throughout the refrigerator Unusual noises from the freezer compartment — grinding, squealing, or clicking as the motor bearings fail or the blade rubs on frost/ice Frost or ice buildup around the cooling sections and evaporator coils Refrigerator running continuously or more frequently than usual to compensate for poor air circulation Noticeable decrease in overall cooling efficiency Food spoiling faster than normal in the fresh food compartment Fan motor not spinning at all when the compressor is running Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This evaporator fan motor assembly directly replaces the following OEM and cross-reference part numbers: W11224591, W10865431, 4844712, W10728111, W11215582, AP6329809, AWP43665, EAP11738038, FIX12349521, DLB5985WPEB, PD00052715, PS12349521. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select bottom-mount French door refrigerators from the following brands: Whirlpool refrigerators — WRF757SDHV00, WRF757SDHZ00/Z01/Z02, WRF767SDHV00/V02, WRF767SDHZ00/Z01/Z02 series Whirlpool refrigerators — WRF736SDAB14, WRF736SDAM14, WRF736SDAW14, 7WF736SDAM14 series KitchenAid refrigerators — KRFF507HPS00/PS01/PS02, KRFF507HBS02, KRFF507HWH02 series Maytag refrigerators — MFT2574DEH02 and related bottom-mount French door models Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper refrigerators — select Whirlpool-built models Kenmore / Sears and Ikea refrigerators — select Whirlpool-built models Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Complete evaporator fan motor assembly — includes fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat in one integrated unit Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments for even temperatures Resolves the classic "fridge warm, freezer cold" symptom of evaporator fan failure Prevents frost buildup by maintaining proper airflow across the coils White finish, direct-fit replacement using original mounting points and connectors Because the assembly bundles the defrost thermostat and temperature sensor, it addresses multiple potential failure points in a single repair Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521 Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series, plus Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea Whirlpool-built bottom-mount refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number W11224591 Part Type Freezer Evaporator Fan Motor Assembly Condition Aftermarket Replacement Application Bottom-Mount French Door Refrigerators (Whirlpool platform) Assembly Includes Fan Motor, Wiring Harness, Temperature Sensor (Thermistor), Defrost Thermostat Location Freezer compartment, behind rear panel Color White Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located in the freezer compartment behind the rear access panel. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access to the back wall. If there's frost or ice buildup on the rear panel or coils, allow the freezer to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily. Remove the screws securing the rear freezer access panel and lift it away to expose the evaporator coils and fan motor assembly. Photograph the wiring harness connections and the fan motor orientation before disconnecting anything. Disconnect the wire harness connectors from the old assembly and release it from its mounting points. Lift out the old fan motor assembly. Install the new W11224591 assembly using the original mounting points and connectors — since this is a complete assembly, the fan motor, harness, temperature sensor, and defrost thermostat all transfer as one unit. Reconnect the wiring harness, matching your photos. Confirm the fan blade spins freely by hand without rubbing on any surrounding surface. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Test airflow and temperature consistency before considering the job complete. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves. Frequently Asked Questions My refrigerator section is warm but the freezer is still cold — is this the fan motor? This is the single most common and telling symptom of a failed evaporator fan motor on these bottom-mount French door refrigerators. Here's why: the evaporator coils (which produce the cold) are in the freezer, and the evaporator fan is what pushes that cold air up into the fresh food compartment. When the fan motor fails, the freezer stays cold (it's right next to the coils) but the fridge section warms up because no air is being circulated to it. If your freezer is cold and your fridge is warm, the evaporator fan motor is the prime suspect. You can confirm by listening for the fan running when the compressor is on, or opening the freezer rear panel to see if the fan spins. What's included with this part — is it just the motor? This is a complete assembly, not just the bare motor. It includes the fan motor, the wiring harness, the temperature sensor (thermistor), and the defrost thermostat — all integrated into one unit. This is actually an advantage: since these components live together in the freezer compartment and can each cause cooling problems, replacing them as a bundle addresses multiple potential failure points in a single repair, reducing the chance you'll be back in the freezer compartment a few months later for a related part. Why is my evaporator fan making noise? A noisy evaporator fan usually means one of two things: the motor bearings are wearing out (producing grinding or squealing), or the fan blade is rubbing against frost or ice that has built up around it. If frost buildup is the cause, that often points to a secondary problem with the defrost system (defrost heater, thermostat, or control) allowing ice to accumulate where it shouldn't. Since this replacement assembly includes a new defrost thermostat, it addresses one of the common defrost-related causes. If heavy frost keeps returning after replacement, the defrost heater or control board should be investigated next. Do I need to defrost the freezer before installing this? If there's frost or ice buildup on the rear freezer panel or evaporator coils, yes — clear it before installing the new assembly. Leave the freezer empty and unplugged with the door open for several hours (longer for heavy ice) to let everything thaw naturally, placing towels at the base to catch melt water. Never chip or pry ice off the evaporator coils with a tool — the aluminum fins are delicate and a damaged coil is a far more expensive repair. Once everything is fully thawed and dried, proceed with the fan motor replacement. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the fit, mounting points, connector configuration, and function of the original W11224591 evaporator fan motor assembly used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore bottom-mount French door refrigerators — including the integrated harness, temperature sensor, and defrost thermostat. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

WG447 Microwave Mica Sheet, Waveguide Cover – Compatible with Whirlpool, GE, Samsung, LG, Panasonic, and More Product Description Protect your microwave’s internal components with the WG447 Microwave Mica Sheet / Waveguide Cover. Microwave mica chips can effectively prevent water or oil and other substances from splashing on the magnetron or other components during the heating process of food. Protect the microwave oven from burning. Size can be cut: The waveguide cover size is 10 cm*10.8 cm (3.93 in x 4.65 in), you could cut it into any size to fit your microwave oven. Easy to cut. Widely used: As a kind of heat resisting and insulating product. Mica Plates is widely used in household appliances such as hair dryers, toasters, microwave ovens, warmers, etc.  Replaces Part Numbers universal microwave mica sheet equivalents. Size can be cut: The waveguide cover size is 10 cm*10.8 cm (3.93 in x 4.65 in), you could cut it into any size to fit your microwave oven. Easy to cut.   Compatibility This replacement waveguide cover fits a wide range of Whirlpool, GE, Samsung, LG, Panasonic, Emerson, Sharp, Kenmore, and other microwaves that use a cut-to-fit mica sheet. Common compatible models include (but are not limited to):Whirlpool WMH31017HS, GE JVM3160RFSS, Samsung ME18H704SFS, LG LMV1762ST, Panasonic NN-SN766S. Always compare dimensions before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Universal cut-to-fit design matches OEM insulation and heat resistance ⚡ Restores Safe Operation – Prevents arcing, sparking, and microwave energy leakage 🔥 Heat & Moisture Resistant – Made from high-grade mica composite ✂️ Easy to Trim – Can be cut to match original waveguide cover size 🛡️ Fixes Common Issues – Solves sparking, burning smell, and uneven heating caused by damaged covers 📐 Product Specification Part Number: WG447 Component Type: Microwave Mica Sheet / Waveguide Cover Material: Heat-resistant mica composite Dimensions: Approx. 6" × 6" (can be trimmed to size) Thickness: Standard 0.3–0.4 mm mica sheet Mounting: Press-fit or screw-secured depending on model Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Scissors or utility knife (for trimming), screwdriver (if applicable) ⚠️ Safety First: Always unplug the microwave before servicing. Do not operate the microwave without a waveguide cover. Steps: Disconnect power and remove the old burned or damaged mica cover. Use the old cover as a template to trim the new WG447 mica sheet. Align the new cover over the waveguide opening. Press into clips or secure with screws depending on your model. Restore power and test heating performance. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Stop microwave sparking and restore safe heating — Add to Cart Now for a quick, reliable fix!

Read more less

XPARTCO EAU65058315 Refrigerator Evaporator Fan Motor The XPARTCO EAU65058315 is an aftermarket replacement DC evaporator fan motor assembly for select LG and Kenmore refrigerators, replacing LG part EAU65058315. The evaporator fan motor circulates cold air through the refrigerator, helping to keep temperatures consistent and prevent frost buildup. When it wears out or fails, the refrigerator may run too warm or too cold, build up frost, or make unusual noise. This is the evaporator fan, which moves air across the evaporator coils, not the condenser fan near the compressor. Check your model number before ordering. Quick Answer The XPARTCO EAU65058315 Evaporator Fan Motor replaces the evaporator fan motor on a compatible LG or Kenmore refrigerator when it has failed. Classic symptoms: the refrigerator or freezer is too warm, frost builds up, or the fan makes unusual noise. Other parts can cause the same symptoms, so confirm the fan is the problem first. Common Problems This Part Fixes Refrigerator or freezer too warm or too cold Frost buildup Unusual noises from the fan area Moisture or water leaking Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This evaporator fan motor directly replaces the following part number: EAU65058315, EAU63103209, ODM-056F-15, ALG54104, AP6247423, EAP12115088, PD00081425, PS12115088, PS17308826, AP7211789 LG uses many similar fan motor numbers for different models. If your old motor shows a different number, contact our support team and we'll check whether it matches. Compatibility This evaporator fan motor is listed for LG, Kenmore and Kenmore Elite bottom-mount refrigerators, including these examples: LG LFX25974SW, LFCS22520S, LFDS22520S Kenmore 79570339411, 79579412811, 79579412810 Kenmore Elite 79579049314, 79579044313 Note: The models above are a sample, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Aftermarket replacement for the LG EAU65058315 evaporator fan motor DC motor assembly Circulates cold air through the refrigerator Helps keep temperatures consistent and prevent frost buildup Product Specifications Part Number XPEAU65058315 OEM Part Number EAU65058315 Part Type Refrigerator Evaporator Fan Motor Condition Aftermarket Replacement Motor Type DC Application Select LG, Kenmore & Kenmore Elite Refrigerators Installation Notes ⚠️ Unplug Power Before Installing Unplug the refrigerator and move perishable food to a cooler before you begin. Wear work gloves. Follow your model's service guide to reach the evaporator fan, note how the wiring connects, and swap the motor. Reconnect the wiring, restore power, and check that the fan runs quietly. Frequently Asked Questions My refrigerator is running warm. Is this the part I need? It can be, if the evaporator fan has failed. Other parts can cause the same symptoms, so confirm the fan is not blocked by frost and that it fails to spin before replacing it. Is this the evaporator fan or the condenser fan? This is the evaporator fan motor, which circulates cold air through the refrigerator. The condenser fan motor is a different part, located near the compressor. Is this an OEM or aftermarket part? This is an aftermarket replacement from XPARTCO, made to replace LG part EAU65058315. If you specifically need a genuine LG part, contact our support team. Will this fit my refrigerator? It is listed for select LG, Kenmore and Kenmore Elite bottom-mount models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

2-Pack XPARTCO WB03X27704 Microwave Waveguide Locking Button – Compatible with GE Microwaves Product Description Protect your microwave’s internal components with the XPARTCO WB03X27704 Microwave Waveguide Locking Button. This high-quality aftermarket replacement secures the waveguide cover in place, preventing it from shifting, falling, or allowing food splatter to enter the waveguide channel. A broken or missing locking button can lead to sparking, uneven heating, or damage to the magnetron. Replacing it with this durable XPARTCO button restores safe and reliable microwave performance. Replaces Part Numbers WB03X27704, WB02X10997, PD00045753, EAP12582530, AP6783280, 4813990, PS12582530 Compatibility This replacement waveguide locking button fits select GE countertop, over-the-range, and built-in microwaves. Example compatible models include (but are not limited to):GE JVM3160DFWW, JVM6175SK3SS, JVM7195SK5SS, PVM9005SJ2SS, and many others. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit, size, and retention strength 🔒 Secures Waveguide Cover – Prevents shifting, sparking, or magnetron contamination 💰 Cost-Effective Solution – Affordable alternative to OEM locking buttons 🛠️ Durable Construction – Precision-molded plastic resists heat and wear 🛡️ Fixes Common Issues – Solves loose or missing cover, arcing, or uneven microwave heating 📐 Product Specification Part Number: WB03X27704 Component Type: Microwave Waveguide Cover Locking Button Material: High-strength molded plastic Color: Black (may vary slightly by batch) Mounting: Snaps into microwave cavity to retain waveguide cover Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: None (in most models) ⚠️ Safety First: Always unplug the microwave before servicing.Microwaves contain high-voltage components even when unplugged — avoid internal access unless qualified. Steps: Disconnect power to the microwave. Open the microwave interior and remove the damaged or missing locking button. Position the new XPARTCO WB03X27704 locking button in the designated cavity slot. Press firmly until it snaps into place. Ensure the waveguide cover is securely held. Restore power and test microwave operation. ⏱️ Time Required: 1–2 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your microwave and prevent sparking — Add to Cart Now for a fast, reliable fix!

Read more less

XPARTCO W10498976 Refrigerator Water Inlet Valve Replaces WPW10498976 The XPARTCO W10498976 is an aftermarket replacement refrigerator water inlet valve assembly compatible with select Whirlpool, Maytag, KitchenAid, Kenmore, and Ikea bottom-freezer and French door refrigerators in the WRB, WRF, MBF, GX5, GB9, GB2, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the refrigerator that controls the flow of water from the household supply line to the ice maker and, on models with a door dispenser, to the water dispenser. When the solenoid coil burns out or the valve seat becomes clogged with mineral deposits, the ice maker stops producing ice, the water dispenser stops working, water trickles weakly, or water leaks from the valve body. Rated 120V, 50/60Hz, 35W solenoid, this valve measures 3-1/2"L x 2-3/4"W x 3"H and includes the valve body and mounting bracket. It connects via 1/4" inlet fitting to the household supply line and uses push-in tube fittings on the outlet side. It directly replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, 2315508, IMV-576, AP6022334, EAP11755667, PD00024636, PS11755667, WP2315576, and WV8047. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO W10498976 Refrigerator Water Inlet Valve fixes Whirlpool-family bottom-freezer and French door refrigerators where the ice maker is not making ice, the water dispenser is not working or producing only a trickle, or water is leaking from the back of the refrigerator. 120V/50-60Hz/35W solenoid, 3-1/2"L x 2-3/4"W x 3"H, includes bracket. 1/4" inlet connection. Replaces WPW10498976, W10420082, W10498974, K-78200, 2684516, AP6022334, PS11755667. Compatible with Whirlpool WRB/WRF, Maytag MBF, KitchenAid, Kenmore, and Ikea. Common Problems This Part Fixes Ice maker not producing ice or producing very small cubes due to insufficient water supply Water dispenser not working — no water flows when the lever or button is pressed Water dispenser producing only a trickle — valve partially blocked or solenoid weakening Water leaking from behind the refrigerator near the water valve Ice maker fills but overflows — valve stuck open and not closing properly Humming sound near the back of the refrigerator when requesting ice or water — solenoid energized but valve not opening No water reaching the refrigerator despite supply line being connected and pressurized Replaces Part Numbers This water inlet valve directly replaces the following OEM and cross-reference part numbers: WPW10498976, W10498976, W10420082, AWP50873, EAP11755667, PD00024636, AP6022334, PS11755667.  If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water inlet valve is compatible with select bottom-freezer and French door refrigerators from the following brands and series: Whirlpool refrigerators — WRB322, WRB329, WRF535, WRF555, and related WRB/WRF series (French door and bottom-freezer models) Maytag refrigerators — MBF1958, MBF2258, and related MBF series KitchenAid refrigerators — select bottom-freezer and French door models Kenmore / Sears refrigerators — select Whirlpool-built models Ikea refrigerators — select models (Whirlpool-built) Other Whirlpool-platform models including GB9, GB2, GX5, GX2, ET1CH, ET8CH, IX5HH, ED22, and related series Note: Always verify your exact model number before ordering — water inlet valves are model-specific and not universal across all refrigerator configurations. Check that the supply line connection size (1/4") matches your existing supply line before purchasing. Key Features Solenoid-operated valve — opens on command from the refrigerator's control board to supply water to the ice maker and water dispenser Rated 120V, 50/60Hz, 35W — correct electrical specifications for compatible Whirlpool-family refrigerators Dimensions: 3-1/2"L x 2-3/4"W x 3"H — includes mounting bracket for direct installation 1/4" inlet connection — matches standard residential refrigerator supply line diameter Push-in outlet tube fittings — easy connection to existing water supply tubing inside the refrigerator Plastic and metal construction — durable and resistant to mineral buildup Replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, AP6022334, and over 10 additional cross-references Compatible with Whirlpool WRB/WRF series, Maytag MBF series, KitchenAid, Kenmore, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number W10498976 OEM Part Number WPW10498976 Part Type Refrigerator Water Inlet Valve Assembly Condition Aftermarket Replacement Application Bottom-Freezer and French Door Refrigerators Voltage 120V AC Frequency 50/60 Hz Solenoid Wattage 35W Dimensions 3-1/2"L x 2-3/4"W x 3"H Inlet Connection 1/4 inch Color Brown / Blue / Yellow / Gray Material Plastic / Metal Includes Water valve body and mounting bracket Compatible Brands Whirlpool, Maytag, KitchenAid, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the household water supply valve before beginning. Place a towel and small container under the valve area to catch residual water. Pull the refrigerator away from the wall to access the back lower panel — remove the panel screws to expose the water inlet valve. Photograph the wiring harness connections and water tube connections before disconnecting. Turn off the water supply and disconnect the 1/4" supply line from the valve inlet — use an adjustable wrench, as some compression fittings may be stuck. Squeeze the plastic retaining clips on the outlet tube fittings and pull the internal water tubes free. Disconnect the wiring harness. Unscrew the mounting bracket and remove the old valve. Install the new W10498976 valve with its bracket, reconnect the internal water tubes (push until they click), reconnect the wire harness and supply line. Restore water supply and power. Run a water dispenser test and check for leaks. Tools needed: Phillips screwdriver, adjustable wrench, needle-nose pliers. Frequently Asked Questions What does the refrigerator water inlet valve do? The water inlet valve is an electrically controlled solenoid valve that opens on command from the refrigerator's control board to allow household water pressure to push water through to the ice maker fill tube or the water dispenser. When the ice maker calls for water or you press the dispenser lever, the board sends voltage to the solenoid coil, which opens the valve. When the demand is satisfied, the voltage stops, the spring closes the valve, and water flow stops. A failed solenoid coil — or a valve seat clogged with mineral deposits — prevents the valve from opening or closing correctly, causing no water, weak water, overflow, or dripping. What is the difference between W10498976 and WPW10498976? These are the same water inlet valve. WPW10498976 is the updated Whirlpool OEM part number that superseded the original W10498976. The W10420082 and W10498974 are also cross-references for this same valve from earlier production runs. This aftermarket replacement is compatible with all of these numbers. How do I know if the water inlet valve has failed vs. something else? First confirm the household water supply valve behind the refrigerator is fully open and the supply line is not kinked. Then check the water filter — a clogged filter is one of the most common causes of weak or no water flow and is mistaken for a valve failure. If both supply pressure and the filter are good, test the valve's solenoid coil with a multimeter — a working coil reads 200–500 ohms of resistance; an open circuit confirms failure. If the solenoid tests good but the valve still does not open when the control board sends voltage, the valve seat may be physically clogged with mineral deposits and the valve needs to be replaced. My ice maker is not working but my water dispenser is fine — is it the valve? Possibly — but if the water dispenser works normally, the main valve solenoid is likely functioning. On some refrigerator configurations, the ice maker and the dispenser are controlled by separate solenoid ports on the valve assembly. If only the ice maker port has failed, the dispenser can continue working while ice production stops. Test the ice maker solenoid coil separately. However, a more common cause of ice maker failure with a working dispenser is the ice maker module, freezer temperature, or ice maker shut-off arm — rule out those causes before replacing the valve. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from plastic and metal to match the electrical specifications and dimensions of the original WPW10498976 water inlet valve assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO EAV43060807 Refrigerator LED Assembly

Read more less

XPARTCO S97018253 Range Vent Hood Light Fuse The replacement S97018253 Range Vent Hood Light Fuse is designed for select Broan range hood models. This replacement fuse protects the range hood’s light circuit from power surges or faults. Ideal for restoring functionality to select Broan range hoods experiencing light-related issues, such as non-functioning lights or intermittent power. Note: Disconnect power before installation. Handle glass fuse carefully. Replaces part numbers: S97018253, 1930589, 97018253, AP5616207, PS10280886. Compatibility (S97018253): Compatible with select Broan range hood models, including but not limited to: Broan: QP2, QP3, QP4 series (e.g., QP230BC, QP230BL, QP230SS, QP236BC, QP236BL, QP236SS, QP236WW, QP242BC, QP242BL, QP242SS, QP242WW, QP330BL, QP330SS, QP330WW, QP336BL, QP336SS, QP336WW, QP342BL, QP342SS, QP342WW, QP430SS, QP436SS, QP442SS) Verify your model number or contact our support team for assistance. Key Features (S97018253): ✅ Brand Compatibility: Fits select Broan range hood models. 🔥 Specifications: Replacement fuse, 8A, 120V, glass fuse (5x20mm), heat-resistant. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes. 🛡️ Reliable Fixes: Addresses range hood light issues like non-functioning lights or intermittent power. Installation Notes (S97018253): Safety First: Disconnect the appliance from the power source before installation. Location: Typically found in the upper left corner of the range hood control board; remove filters and bottom pan to access. Tools: Use a screwdriver to access the control board and pliers to remove and install the fuse. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or range hood running today! Add to cart now for a budget-friendly fix!

Read more less