Search results for "refrigerator water filters"

XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly The XPARTCO WR51X10055 is an aftermarket replacement refrigerator defrost heater and bracket assembly compatible with a wide range of GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators. The defrost heater is a glass quartz tube heater mounted on a bracket below the evaporator coils in the freezer compartment. During each automatic defrost cycle, the heater energizes and melts any frost that has accumulated on the evaporator coils — maintaining unobstructed airflow through the coils so the refrigerator can cool efficiently. When the heater fails, frost accumulates on the coils unchecked, blocking airflow and causing both the freezer and fresh food sections to gradually warm up. Rated at 120V, 725W, this single quartz tube heater assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H and includes the heater element and mounting bracket. It directly replaces WR51X10030, AP3183311, 914088, AH303781, EA303781, PS303781, SH323, and EAP303781. Often replaced together with the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) for a complete defrost system repair. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly fixes GE and Hotpoint refrigerators where frost is building up on the evaporator coils, the freezer is too warm, the fresh food section is warming up, or the refrigerator is running continuously without cooling properly. Single quartz tube heater, 120V / 725W. Assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H. Includes heater and bracket. Replaces WR51X10030, AP3183311, 914088, SH323, and more. Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café. Common Problems This Part Fixes Frost or ice buildup covering the evaporator coils in the freezer compartment Freezer section warming up or not maintaining set temperature Fresh food section warming up even though the freezer is running Refrigerator running continuously but not cooling properly Visible frost accumulation on the freezer back wall behind the panel Defrost heater element visibly burned out, broken, or dark/charred at the ends Both compartments gradually warming up after working normally for years Replaces Part Numbers This defrost heater assembly directly replaces the following OEM and cross-reference part numbers: WR51X10055, WR51X10030, 914088, AGE29323, AH303781, AP3183311, EA303781, EAP303781, PD00001004, PS303781. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This defrost heater is compatible with select refrigerators from the following brands: GE refrigerators (side-by-side, French door, top-freezer, and bottom-freezer) Hotpoint refrigerators Kenmore / Sears refrigerators (select GE-built models) Haier refrigerators (select GE-platform models) Americana refrigerators Monogram refrigerators Café refrigerators Tip: When replacing the defrost heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. These three parts form the defrost system and are commonly replaced together — replacing all three prevents a second disassembly if another component fails soon after. Key Features Single quartz tube glass heater — melts frost from the evaporator coils during each automatic defrost cycle, maintaining airflow and cooling efficiency Rated 120V / 725W — correct electrical specifications for compatible GE refrigerators Assembly dimensions: 12-1/8" L x 3-3/8" W x 2-1/8" H — direct fit into the evaporator coil bracket Includes heater element and mounting bracket — complete assembly ready to install Replaces WR51X10030 and WR51X10055 — both older and current part numbers covered Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators Often replaced together with WR50X10068 defrost thermostat and WR55X10025 temperature sensor Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number WR51X10055 Also Replaces WR51X10030 Part Type Refrigerator Defrost Heater and Bracket Assembly Condition Aftermarket Replacement Heater Type Single quartz tube glass heater Voltage 120V AC Wattage 725W Dimensions 12-1/8" L x 3-3/8" W x 2-1/8" H Includes Heater element and mounting bracket Often Replaced With WR50X10068 Defrost Thermostat, WR55X10025 Temperature Sensor Compatible Brands GE, Hotpoint, Kenmore, Haier, Americana, Monogram, Café Installation Notes ⚠️ Unplug Refrigerator Before Starting — Wear Work Gloves Unplug the refrigerator before beginning. Remove all food and shelving from the freezer compartment. Remove the freezer bottom drawer and the back panel screws (typically 2 hex-head screws). Slide out the back panel to expose the evaporator coils and defrost heater assembly. If the coils are covered in frost or ice, use a hair dryer to melt the ice before removing the heater — do not chip or force the heater free while iced over, as the glass element is fragile and will break. Disconnect the heater wires from the wiring harness — note the orientation before disconnecting. Remove the 2 Phillips screws securing the heater bracket and lift the heater assembly out. Install the new WR51X10055 heater assembly in the same position, reconnect the wires, and reinstall the bracket screws. Reinstall the back panel, shelving, and food. Restore power and verify the defrost cycle operates normally. Wear work gloves throughout — the evaporator area has sharp edges. Tools needed: Phillips screwdriver, 1/4" nut driver, hair dryer (if coils are iced over), work gloves. Frequently Asked Questions What does the refrigerator defrost heater do? Modern refrigerators use an automatic defrost system that periodically runs a defrost cycle — typically once or twice a day — to melt frost that accumulates on the evaporator coils during normal operation. The defrost heater is a glass quartz heating element that energizes during this cycle and melts the frost off the coils. This keeps the coils clear so air can flow freely through them to cool the refrigerator. When the heater fails, frost builds up unchecked on the coils over days or weeks — eventually blocking airflow completely and causing both compartments to warm up, even though the compressor is still running. How do I know if my defrost heater has failed? Remove the freezer back panel to expose the evaporator coils. If the coils are heavily coated in frost or solid ice — especially if both the freezer and refrigerator sections have been warming up — a failed defrost heater is the most likely cause. You can confirm with a multimeter: disconnect the heater and probe both wire ends. A working heater shows continuity (resistance between approximately 10–200 ohms at room temperature depending on wattage). No continuity confirms the heater element has burned out. Also visually inspect the glass tube — a burned, blackened, or broken tube is a clear sign of failure. Should I also replace the defrost thermostat and temperature sensor? Yes — since the freezer must be fully emptied and the back panel removed to replace the heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. All three components form the defrost system and wear at similar rates. A failed thermostat or sensor can cause the heater to run too long or not at all — replacing all three in a single repair eliminates that risk and saves you from another complete freezer teardown in the near future. My freezer is warming up but the compressor is running — is it the defrost heater? It often is — but not always. A compressor that is running but not cooling can be caused by a failed defrost heater (frost blocking airflow), a faulty evaporator fan motor (air not circulating), a defrost thermostat or timer failure, or a sealed system problem (refrigerant leak or compressor issue). The easiest way to distinguish a defrost system failure from other causes is to open the freezer and check whether frost has built up on the back panel or coils. If yes, the defrost heater is the most likely culprit. If the coils are clear and the compressor is running, look at the evaporator fan or sealed system next. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured as a single quartz tube glass heater rated at 120V/725W to match the dimensions and performance of the original WR51X10055 defrost heater assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

WR30X39385 Genuine OEM GE Refrigerator Ice Maker The WR30X39385 is a genuine GE OEM ice maker assembly for GE refrigerators. This complete unit receives water, holds it in an internal mold, and freezes it into cubes, then ejects the finished ice into the freezer's ice bucket or drawer, repeating the cycle automatically until the bucket is full. It's the full assembly, not just an internal component, so replacing it addresses the ice-making mechanism, mold, and cycling controls together as one unit. Over time, internal components can wear or fail electrically, or the mold itself can develop issues that affect how cleanly ice releases. A failing ice maker typically shows up as reduced or stopped ice production, or ice cubes coming out hollow or malformed rather than solid. It directly replaces AP7179920. Quick Answer The WR30X39385 Genuine OEM GE Refrigerator Ice Maker fixes GE refrigerators that have stopped making ice, are producing significantly less ice than usual, or are making hollow or malformed cubes. Complete ice maker assembly. Replaces AP7179920. Installation is a moderate DIY repair, typically 30-45 minutes. Common Problems This Part Fixes Ice maker has stopped producing ice entirely Ice maker producing significantly less ice than usual Ice cubes coming out hollow or malformed instead of solid Ice maker cycling but not ejecting cubes into the bucket Inconsistent ice production from cycle to cycle Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator ice maker directly replaces the following OEM and cross-reference part numbers: WR30X39385, 200D1181G118, 4983508, Model CAN07-018, WR01F04991, AP7179920, EAP16660009, AGE28641, PD00079707, PS16660009 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This ice maker is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, and Café refrigerators built on the GE platform. Note: Always verify your full model number before ordering, since GE uses several different ice maker designs across its refrigerator lineup. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified mold design and cycling mechanism Complete ice maker assembly — freezes water into cubes and ejects them automatically Resolves "not making ice," "reduced ice production," and "hollow or malformed cubes" symptoms Direct drop-in replacement — no modification required Replaces AP7179920 Compatible with GE, Hotpoint, Haier, Monogram, and Café refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Moderate DIY repair, typically 30-45 minutes Product Specifications Part Number WR30X39385 Part Type Refrigerator Ice Maker Assembly Condition Genuine OEM Brand GE Function Freezes water into cubes and ejects them automatically into the ice bucket/drawer Repair Difficulty Moderate — 30 to 45 minutes Quantity 1 ice maker assembly Compatible Brands GE, Hotpoint, Haier, Monogram, Café Installation Notes ⚠️ Unplug Refrigerator Before Starting — Allow Components To Defrost Disconnect power to the refrigerator before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. If there's frost or ice buildup around the ice maker or its fill tube, allow the area to defrost fully before continuing, since ice buildup can make removal difficult and may mask the fill tube's actual condition. Open the freezer door and locate the ice maker assembly. Remove the ice bucket or drawer to improve access. Photograph the wiring harness connection and the fill tube position before disconnecting anything. Remove the mounting screws securing the ice maker in place, then disconnect the wire harness connector and the water fill tube connection. Remove the old ice maker fully. Install the new WR30X39385 in the same mounting position, making sure the fill tube aligns correctly so water reaches the mold without leaking, and reconnect the wire harness connector securely. Secure the mounting screws, reinstall the ice bucket or drawer, and restore power. Allow several hours for the first cycle to complete and confirm ice is being produced and ejected normally. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My ice cubes are coming out hollow. Is that the ice maker? Yes, hollow or malformed cubes are a documented symptom of ice maker issues on this platform, alongside reduced or stopped ice production altogether. This can point to a problem with how the mold fills or releases ice, and replacing the complete assembly addresses the mold and cycling mechanism together rather than trying to diagnose and repair individual internal components. Why does the fill tube alignment matter so much during installation? The fill tube is what delivers water from the refrigerator's supply line into the ice maker's mold at the start of each cycle. If it's not aligned correctly during installation, water can miss the mold, leak into the freezer compartment, or fail to fill the mold completely, all of which prevent normal ice production even with a perfectly good new ice maker installed. Do I need to defrost anything before starting this repair? If there's visible frost or ice buildup around the old ice maker or its fill tube, yes — letting that area defrost fully makes removal easier and gives you a clearer look at the fill tube's actual condition, rather than working around ice that could mask damage or make the old unit harder to detach cleanly. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It includes the same mold design, cycling mechanism, and mounting configuration as the ice maker originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine Whirlpool OEM Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute Genuine OEM ice chute door for select Whirlpool, KitchenAid, JennAir, and Kenmore side-by-side refrigerators. Product Overview The Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute is a Genuine OEM dispenser component that opens to allow ice to pass through the chute and closes to help seal the dispenser opening when not in use. A damaged, warped, or sticking chute door can allow ice to spill, prevent the dispenser from sealing correctly, or cause frost and moisture around the dispenser area. Quick Answer WP2305258 is the Genuine Whirlpool OEM ice dispenser chute door. It replaces original part number 2305258 and fits select Whirlpool-built side-by-side refrigerators. Common Problems This Part May Fix Ice falls out of the dispenser unexpectedly Ice chute door will not close fully Door is cracked, warped, or broken Warm air enters through the dispenser opening Frost or moisture forms around the chute Dispenser flap does not seal after dispensing Replaces and Cross-References WP2305258, 1174891, 2305258, AP3854387, AWP885431, AH986856, EAP986856, OEM18021486, PD00004757, PS986856 Cross-reference numbers are supplied for identification. Verify the refrigerator model number before ordering. Compatibility Confirmed applications include select Whirlpool-built side-by-side refrigerators sold under Whirlpool, KitchenAid, JennAir, and Kenmore brands. Examples include: GS6NBEXRY02 KSRS25RVMS05 KSRS25RVMK05 KSCS25FVSS03 KSRT25CRSS00 KSRS25RSMS01 KSCS25FTMK02 KSCS23FVMS01 KSRS25RVMK02 106.54782803 106.57794704 106.57792704 Important: This is only a partial fitment list. Verify the complete model number from the refrigerator data label before purchase. Key Features Genuine Whirlpool OEM replacement part Ice dispenser chute door / flap Helps direct ice into the dispensing chute Closes after dispensing to help seal the opening Direct-fit component for compatible models Product Specifications Manufacturer Part Number WP2305258 Brand Whirlpool Part Type Refrigerator Ice Dispenser Door Chute OEM Status Genuine OEM Appliance Type Refrigerator Condition New Package Quantity 1 Ice Chute Door Installation Notes Disconnect refrigerator power before service. Remove the dispenser trim or front housing according to the model-specific procedure. Photograph the original chute-door position and linkage before removal. Inspect the support bracket, spring, motor/actuator, and seal surfaces for damage. Install the new chute door in the same orientation and confirm free movement. Reassemble the dispenser and confirm the door opens during dispensing and closes completely afterward. Diagnostic tip: If the chute door does not close after replacement, inspect the actuator motor, support bracket, spring, linkage, and dispenser control before replacing additional parts. Frequently Asked Questions Is WP2305258 a Genuine OEM part? Yes. It is a Genuine Whirlpool OEM refrigerator dispenser ice chute door. Does WP2305258 replace 2305258? Yes. WP2305258 is the current replacement for original part number 2305258. What does the ice chute door do? It opens when ice is dispensed and closes afterward to help seal the dispenser opening. Will this fit every Whirlpool refrigerator? No. It fits specific dispenser designs. Confirm the complete refrigerator model number before ordering. Shop With Confidence Verify the refrigerator model before ordering. This listing is for the Genuine Whirlpool OEM WP2305258 ice chute door. Genuine Whirlpool OEMIce Chute DoorCompatibility SupportFast U.S. Shipping

Read more less

WR60X26866 Genuine OEM GE Refrigerator Axial Evaporator Fan Motor The WR60X26866 is a Genuine OEM GE replacement axial evaporator fan motor manufactured by GE to factory specifications, designed as a direct fit for the fresh food section of select GE French door refrigerators, including the CFE28, CFE29, CWE23, CYE22, CYE23, DFE28, DFE29, GFD28, GFE26, GFE27, GFE28, GFE29, GFS26, GFS28, GNE26, GNE29, GYE22, GYS22, PFD28, PFE28, PFE29, PWE23, PYD22, PYE22, PYE23, and ZWE23 series. The evaporator fan motor pulls air through the evaporator coils to remove heat from the circulating air inside the refrigerator. Without a functioning evaporator fan, the refrigerator compartment cannot maintain its target temperature even when the compressor and condenser are running normally — the cold air generated at the evaporator simply isn't being circulated to the food storage areas. The WR60X26866 is a DC motor rated at 13.6V DC, 0.16A, with a fan housing measuring 3-4/7"L x 2"W x 3-1/8"H, plus a multi-color wire harness and plug approximately 11-1/2" long. It includes the axial fan blade and harness as a complete assembly. It directly replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, and PS12172983. Important: if your refrigerator was built between May 2014 and March 2015 with serial range FF–HD, the unit's software must be updated before installing this fan motor — see FAQ below. Installs in 20–30 minutes with basic hand tools. Quick Answer The WR60X26866 Genuine OEM GE Refrigerator Axial Evaporator Fan Motor fixes GE French door refrigerators where the fridge isn't cooling but the freezer is cold, the evaporator coils are frosted over, the ice maker isn't working due to insufficient cooling, or there's loud humming or grinding from the freezer area. Axial fan motor, 13.6V DC, 0.16A. Fan housing: 3-4/7"L x 2"W x 3-1/8"H; harness ~11-1/2"L. Replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, PS12172983. Note: May 2014 – Mar 2015 build refrigerators (serial range FF–HD) require a software update before installation. Common Problems This Part Fixes Refrigerator not cooling properly while the freezer remains cold — classic evaporator fan failure Freezer cold but fridge warm — fresh food compartment air not being circulated Frosty or frozen evaporator coils due to insufficient air circulation Ice maker failure caused by inadequate cooling in the compartment Loud humming, grinding, or buzzing noise from the freezer or fresh food compartment Refrigerator running continuously without reaching set temperature Fan blade not spinning freely or seized when checked by hand Multimeter shows no continuity through the motor windings Replaces Part Numbers This evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select GE French door refrigerators, including: GE refrigerators — CFE28, CFE29, CWE23, CYE22, CYE23 series (CFE28TP2MBS1, CFE28USHNSS, CWE23SP2MBS1, CYE22TP2MBS1 and related) GE refrigerators — DFE28, DFE29 series (DFE28JELCDS and related) GE refrigerators — GFD28, GFE26, GFE27, GFE28, GFE29 series (GFD28GBLBTS, GFE26GGHEBB and related) GE refrigerators — GFS26, GFS28, GNE26, GNE29 series GE refrigerators — GYE22, GYS22 series (GYE22HMKEES and related) GE refrigerators — PFD28, PFE28, PFE29 series (PFE28KELFDS and related) GE refrigerators — PWE23 series (PWE23KSKDSS and related) GE refrigerators — PYD22, PYE22, PYE23 series (PYE22KSKBSS and related) GE refrigerators — ZWE23 series and select related Café and Profile French door models Important — Software Update Requirement: If your GE refrigerator was manufactured between May 2014 and March 2015 with a serial number in the range FF–HD, the refrigerator's control software must be updated by GE factory service (or via Software Update Module WR98R882802) before installing this fan motor. Installing the new motor without the software update on these affected units may result in improper performance. Check your refrigerator's serial number plate before ordering. Key Features Axial evaporator fan motor for the fresh food section of GE French door refrigerators Pulls air through the evaporator coils to remove heat and circulate cold air through the refrigerator compartment DC motor — rated 13.6V DC, 0.16A — runs on DC voltage from the refrigerator control board Includes the axial fan blade and pre-attached multi-color wire harness with plug Fan housing dimensions: 3-4/7"L x 2"W x 3-1/8"H; harness and plug approximately 11-1/2" long Quiet operation — engineered to minimize hum and vibration in the refrigerator cabinet Plastic and metal construction, black housing with multi-color harness Replaces an extensive list of GE part numbers including WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, and additional cross-references Compatible with GE, GE Café, and GE Profile French door refrigerators in the CFE, CWE, CYE, DFE, GFD, GFE, GFS, GNE, GYE, GYS, PFD, PFE, PWE, PYD, PYE, and ZWE series Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number WR60X26866 Part Type Refrigerator Evaporator Fan Motor (Fresh Food / Axial) Condition Genuine OEM Application GE French Door Refrigerators Voltage 13.6V DC Amperage 0.16A Fan Type Axial Fan Housing Dimensions 3-4/7"L x 2"W x 3-1/8"H Harness Length Approximately 11-1/2 inches Color Black housing with multi-color harness Material Plastic / Metal Includes Axial fan motor assembly with harness Software Update Required For May 2014 – Mar 2015 builds (serial range FF–HD) — use WR98R882802 Compatible Brands GE, GE Café, GE Profile Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor for the fresh food section is mounted on the back wall of the fresh food (refrigerator) compartment, behind an access panel. Take a photo of the existing fan position and wire harness routing before disconnecting. Remove the shelves and any internal components blocking access to the back wall, then remove the screws holding the rear access panel in place. Disconnect the fan motor's wire harness connector and remove the mounting screws securing the old motor. Note the fan blade orientation on the motor shaft. Install the new WR60X26866 motor assembly in the same position with the blade facing the same direction, reconnect the wiring harness, and reinstall the mounting screws and access panel. Replace the shelves and other internal components, restore power, and confirm the fan spins and the refrigerator cools properly. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves. Frequently Asked Questions My fridge is warm but my freezer is cold — is the evaporator fan motor the problem? Yes — this is one of the most recognizable symptoms of evaporator fan motor failure on GE French door refrigerators with a separate fresh food evaporator. The freezer side has its own cooling circuit and remains cold, while the fresh food side relies on this fan to circulate air across its evaporator coils. When the fan fails, the freezer continues working but the fresh food compartment loses its cold air supply, warming up while the freezer stays at temperature. If you also notice frost building up on the evaporator coils behind the back panel of the fresh food compartment, the fan failure is confirmed. What is the software update requirement for May 2014 – March 2015 refrigerators? GE issued a software update for certain refrigerators manufactured between May 2014 and March 2015 (serial range FF–HD) before they could properly support newer revisions of the WR60X26866 evaporator fan motor. If your refrigerator falls in this date and serial range, the control software must be updated before installing this fan motor — either by GE factory service or by using the Software Update Module part WR98R882802. Installing the new fan on an unupdated unit can result in improper performance. Check the serial number plate inside your refrigerator (typically on the left side wall) to confirm whether your unit is affected. Refrigerators built outside this range do not require the update. How do I test if the evaporator fan motor has failed? Unplug the refrigerator, then access the fan behind the rear panel of the fresh food compartment. First, try turning the fan blade by hand — if it doesn't spin freely, is stiff, or seizes, the motor bearing has failed. Next, listen during normal operation — if the motor is unusually noisy or makes a grinding sound, the bearings are worn even if it still spins. Finally, with the unit unplugged and the motor disconnected, use a multimeter on the motor windings to check for continuity. If the windings show no continuity, the motor has failed electrically. Also check for approximately 11–14V DC at the connector when the refrigerator is running — if voltage is present but the motor doesn't spin, the motor has failed. My fridge has two evaporator fans — which one does this replace? Some GE French door refrigerators have separate evaporator fan motors for the freezer and the fresh food sections. The WR60X26866 is the fresh food evaporator fan motor — it's the axial fan located behind the rear panel of the fresh food compartment, not in the freezer. If your symptom is "freezer cold, fridge warm," this is the correct part. If your symptom is "freezer warm" or "ice maker not making ice but fridge is fine," the freezer evaporator fan motor (a different part number) is more likely the cause. Confirm which compartment has the cooling problem before ordering. Is this an OEM or aftermarket part? This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same axial evaporator fan motor installed in compatible GE, GE Café, and GE Profile French door refrigerators from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

240597220 Genuine OEM Frigidaire Refrigerator Temperature Sensor The 240597220 is a Genuine OEM Frigidaire replacement refrigerator temperature sensor compatible with a wide range of Frigidaire, Electrolux, Kenmore (253/106/795 prefix), Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators and household freezers. This NTC (negative temperature coefficient) thermistor continuously monitors the temperature inside the refrigerator or freezer compartment and sends resistance-based readings to the main control board, which uses this data to cycle the compressor, fans, and defrost heaters to maintain accurate temperatures. As the thermistor heats up or cools down, its electrical resistance changes predictably, allowing the control board to calculate the exact temperature in real time. When this sensor fails or drifts out of range, the refrigerator may run too cold or too warm, cycle excessively, freeze up the evaporator, fail to maintain set temperatures, or display OP error codes. Rated 10K Ohm NTC, with a 5/16" diameter probe, 12" wire, and overall dimensions of 3-5/8"L x 5/8"W x 5/16"H (sensor probe itself measures ~1-3/16"L x 5/16" diameter). Compatible with 20-28 cubic foot North American household refrigerators in French door, side-by-side, top-freezer, and bottom-freezer configurations (post-2005 production). 240597220 is the current OEM part number, superseding 240597203, 240597201, and 240597202. It also replaces 7240597203, AP4032998, AP7243155, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, and PS17647917. Not compatible with mini fridges, car refrigerators, commercial units, wine coolers, or ice makers. Installs in 15–20 minutes with basic hand tools. Quick Answer The 240597220 Genuine OEM Frigidaire Refrigerator Temperature Sensor fixes Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators that run too cold or warm, cycle excessively, freeze up the evaporator, or display OP error codes. NTC thermistor — 10K Ohm at room temperature. 5/16" probe diameter, 12" wire. Overall 3-5/8"L x 5/8"W x 5/16"H. Genuine OEM. Supersedes 240597203, 240597201, 240597202. Also replaces 7240597203, AP4032998, AP7243155, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, PS17647917. For 20–28 cu ft household refrigerators built 2005 or later. Common Problems This Part Fixes Refrigerator running too cold or too warm — sensor not accurately reporting temperature Inconsistent temperatures — fluctuating cooling that can't maintain set point OP error code displayed on the control panel (open sensor circuit) Excessive frost or ice buildup on evaporator coils from erratic defrost timing Refrigerator running continuously without cycling off Freezer over-freezing food or fresh food compartment freezing groceries Food spoilage from temperature instability Multimeter test shows 0 ohms (shorted), infinite resistance (open), or drifted resistance instead of the expected ~10K Ohms at room temperature Replaces Part Numbers This temperature sensor is the current OEM part number and supersedes the following OEM and cross-reference part numbers: 240597220, 240597203, 240597201, 240597202, 7240597203, 4985585, AFR15666, AP7243155, EAP17647917, OEM21729474, PD00088922, PS17647917. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select household refrigerators and freezers from the following brands (20–28 cu ft, built 2005 or later): Frigidaire refrigerators — Gallery and Professional series, plus standard Frigidaire models (BFHS2611LM, BGHS2634KE, BGHS2634KP, BGHS2644KF, CRSH237LB, PRFG2383AF, PRFC2383AF, ERFG2393AS2, FRSS2323AS8, FFHB2740PP5A and many related models) Frigidaire upright freezers — FFFH21F7QW, FGU19F6QWB and related models Electrolux refrigerators — EI24RD65KS0, EI24RD65HS0, EI24RD65HS1, E24RD75KPS0 and related models Kenmore / Sears refrigerators — 253-prefix, 106-prefix, and 795-prefix models (select Frigidaire/Electrolux-built units) Crosley refrigerators (select Frigidaire-built models) White-Westinghouse refrigerators (select models) Kelvinator refrigerators (select models) Gibson refrigerators (select models) Tappan refrigerators (select models) Viking refrigerators (select Frigidaire-platform models) Ikea refrigerators (select Frigidaire-platform models) Not compatible with: mini fridges, car refrigerators, commercial refrigerators/freezers, wine coolers, or dedicated ice makers. Verify your refrigerator was produced after 2005 and check the original part number on the fridge nameplate matches one of the cross-references listed. Contact our support team with your model number if you're unsure. Key Features NTC (negative temperature coefficient) thermistor — resistance changes predictably with temperature, allowing precise temperature monitoring Rated 10K Ohms at room temperature (approximately 25°C / 77°F) Sends real-time temperature data to the main control board to regulate compressor cycling, fan operation, and defrost timing Sensor probe: 5/16" diameter x 1-3/16" length · Overall assembly: 3-5/8"L x 5/8"W x 5/16"H · 12" wire lead White plastic/metal construction with glossy finish Resolves OP error codes when caused by an open sensor circuit Compatible with 20–28 cu ft French door, side-by-side, top-freezer, and bottom-freezer refrigerators built 2005 or later Current OEM part number — supersedes 240597203, 240597201, 240597202 and replaces AP4032998, AH1765215, PS1765215, PS17647917 and additional cross-references Compatible with Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications — guaranteed fit and performance Quick DIY repair — installs in 15–20 minutes with basic hand tools Product Specifications Part Number 240597220 Supersedes 240597203, 240597201, 240597202 Part Type Refrigerator Temperature Sensor (NTC Thermistor) Condition Genuine OEM Application Household Refrigerators and Freezers (Frigidaire/Electrolux platform, 20–28 cu ft, 2005+) Sensor Type NTC (Negative Temperature Coefficient) Resistance 10K Ohms at room temperature Probe Dimensions 5/16" Diameter x 1-3/16" Length Overall Dimensions 3-5/8"L x 5/8"W x 5/16"H Wire Length 12" Color White Finish Glossy Material Plastic / Metal Error Codes Resolved OP (open sensor circuit) Compatible Brands Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Depending on your refrigerator model, the fresh-food temperature sensor is typically located behind the air tower or damper assembly on the rear interior wall of the refrigerator compartment; the freezer temperature sensor is typically located behind the rear freezer access panel near the evaporator coils. Confirm which sensor location matches your symptom and the parts diagram for your specific model before starting. Remove all shelves, drawers, and any items blocking access to the sensor location. Remove the screws holding the air tower/damper cover (fresh food side) or rear freezer access panel to expose the sensor. Photograph the sensor position, wire routing, and connector before removing. Disconnect the wire connector (gently — the connector can be fragile) and release the sensor from its mounting clip. Fully insert the new 240597220 sensor probe into the card slot (no exposure) and secure with the mounting clip. Reconnect the wire connector — plug wiring terminals tightly to avoid poor contact. Use cable ties to secure any loose wire routing as before. Reinstall the cover or panel, replace the shelves and drawers, and plug the refrigerator back in. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, cable ties, multimeter (for testing), work gloves. Frequently Asked Questions What does OP error code mean on my Frigidaire refrigerator? The OP error code (Open) indicates the control board is detecting an open circuit on a temperature sensor input — meaning the sensor is failing to send a resistance signal, either because the sensor itself has failed open internally, the wire has broken, or the connector isn't seated. Replacing the temperature sensor typically resolves the code when the sensor itself is the cause. If the code persists after replacement, check the wire harness between the sensor and the control board for damage, and confirm the connector is fully seated. If the OP code appears alongside other symptoms like frost buildup and cooling issues that persist after sensor replacement, the defrost temperature sensor (on the Harness-Low Side, a different part number) may also need to be replaced, or the main control board may be at fault. How do I test if the temperature sensor has failed? Unplug the refrigerator, disconnect the sensor's wire connector, and set your multimeter to resistance mode. At room temperature (approximately 25°C / 77°F), a working NTC thermistor should read approximately 10K Ohms. If the sensor reads 0 ohms, it has shorted internally. If it reads infinite resistance (open circuit, often shown as "OL" on the multimeter), the sensor has failed open. If it reads significantly off from 10K (for example 8.4K or 5K at room temp), the sensor has drifted and is no longer providing accurate readings — replacement is recommended. Any of these results confirms the sensor needs replacement. My refrigerator has multiple temperature sensors — which one do I replace? Frigidaire refrigerators typically use multiple temperature sensors: one in the fresh food compartment (behind the air tower/damper), one in the freezer compartment (near the evaporator coils), and often a separate defrost temperature sensor on the Harness-Low Side. The 240597203 is used as the fresh food or freezer compartment temperature sensor. If your symptom is "fresh food too warm" or "freezer over-freezing," the fresh food sensor is the likely candidate. If your symptom is "freezer icing up despite defrost heater working," the defrost temperature sensor may be the culprit — a different part number. Check your refrigerator's parts diagram to confirm the correct sensor location for your specific symptom. Does this sensor fit my Kenmore refrigerator? On many Kenmore refrigerators, yes — Sears sells Kenmore-branded refrigerators that are manufactured by Frigidaire/Electrolux, Whirlpool, LG, and Samsung. The 240597203 sensor fits Kenmore refrigerators with model numbers beginning with the 253, 106, or 795 prefixes that are Frigidaire/Electrolux-built. Kenmore refrigerators built by other manufacturers (Whirlpool, LG, Samsung) use different sensors. Check the first three digits of your Kenmore model number — if it's 253, 106, or 795 and falls within the compatible model list, this is the correct part. Is this an OEM or aftermarket part? This is a Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications. It is the exact same temperature sensor installed in compatible Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10316760 Refrigerator Thermistor Sensor The XPARTCO W10316760 is an aftermarket replacement temperature thermistor compatible with a wide range of Whirlpool-built refrigerators sold under the Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef brands. The thermistor sits inside the fresh food or freezer compartment and continuously reports internal temperature back to the electronic control board, which uses that reading to cycle the compressor, evaporator fan, and damper to keep the compartment in range. When the thermistor drifts out of calibration or fails outright, the control board loses an accurate temperature signal and the refrigerator commonly responds with erratic cooling, a warmer-than-normal compartment, food freezing when it shouldn't, or a flashing/blank temperature display. This XPARTCO version is built with a quick-connect mounting clip, so it plugs in without cutting or splicing wires — unlike the genuine Whirlpool OEM part, which ships as a splice-in kit requiring you to cut the old thermistor's leads and join the new ones with included wire connectors. It directly replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers listed below. Installs in 15–30 minutes with basic hand tools. Quick Answer The XPARTCO W10316760 Refrigerator Thermistor Sensor fixes Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators that are running warm, running constantly, freezing food unexpectedly, or showing a flashing/blank temperature display. This version uses a quick-connect clip — no wire cutting or splicing like the genuine Whirlpool splice-kit version requires. Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944. Classic symptom: fridge or freezer running warmer than the setting, or running nonstop. Common Problems This Part Fixes Refrigerator or freezer running noticeably warmer than the temperature setting Fridge running constantly and never cycling off Temperature display flashing, showing dashes, or displaying an error code Food freezing in the fresh food compartment when it shouldn't be Compressor and fans not cycling normally, or running nonstop Inconsistent or swinging temperature readings on the display One compartment (fridge or freezer) running warm while the other stays normal Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers: W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermistor is used across a wide range of Whirlpool-built refrigerators from the following brands: Whirlpool refrigerators (including WRF535SMBM00, WRX735SDBM00, and related French door / side-by-side models) KitchenAid refrigerators (including KBFS22EWBL1, KBFS22EWMS1, KBFS22EWMS3, KBFS22EWMS5, KBFS22EWMS7, KBFS22EWWH1) Maytag refrigerators (select Whirlpool-built models, including KRFF302ESS) Jenn-Air refrigerators (select Whirlpool-built models, including MFI2269VEM) Amana refrigerators (select models) Inglis refrigerators (select models) Magic Chef refrigerators (select models) Note: Many of these refrigerators use separate thermistors for the fresh food and freezer compartments, so confirm which sensor location your model uses before ordering — appearance can be similar across positions. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure. Key Features Direct-fit replacement refrigerator temperature thermistor — reports compartment temperature to the electronic control board Resolves "running warm," "running constantly," "freezing food," and "flashing display" symptoms caused by thermistor failure Quick-connect mounting clip — no wire cutting or splicing required Matches OEM electrical resistance curve for accurate temperature sensing Approximate lead length ~5 inches Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers Compatible with Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in 15–30 minutes with basic hand tools Product Specifications Part Number XPW10316760 OEM Part Number W10316760 Part Type Refrigerator Temperature Thermistor / Sensor Condition Aftermarket Replacement Application Whirlpool-Built Refrigerators (Fresh Food / Freezer Compartment) Mounting Quick-connect clip (no splicing) Approx. Lead Length ~5 inches (may vary by model) Compatible Brands Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, Magic Chef Installation Notes ⚠️ Disconnect Power Before Starting Unplug the refrigerator or shut off power at the breaker before accessing internal panels. Locate the thermistor at its mounting position inside the fresh food or freezer compartment (location varies by model — consult your model's parts diagram if unsure). Photograph the wire routing before disconnecting. On this XPARTCO version, simply unplug the old thermistor's connector from the wiring harness — no cutting or splicing needed. Release the old thermistor from its mounting clip or bracket and remove it. Install the new thermistor in the same position, securing it in its mounting clip. Plug the new thermistor's connector into the wiring harness, matching your photos. Reassemble any panels removed for access. Restore power and allow the refrigerator several hours to stabilize before checking temperatures. Tools needed: nut driver or screwdriver (for panel access), needle-nose pliers (for mounting clip). Frequently Asked Questions Is this the same as the genuine Whirlpool W10316760 thermistor? It's a direct-fit aftermarket equivalent, not the genuine Whirlpool part. The key functional difference is installation: the genuine OEM version ships as a splice-in kit requiring you to cut the old wires and use included splice connectors, while this XPARTCO version has a quick-connect clip that simply plugs in — no splicing tools needed. Will this fit my refrigerator? W10316760 and its cross-reference numbers span a wide range of Whirlpool-built models across several brands. Confirm fit using your refrigerator's exact model number before ordering, since visually similar thermistors are used across different platforms and compartment locations. Contact our support team with your model number if you're unsure. My fridge is warm but the freezer is fine (or vice versa) — could this part be the cause? Yes. Most of these refrigerators use separate thermistors for the fresh food and freezer compartments, so a single failed sensor can cause one section to run warm while the other stays normal. Confirm which sensor location your model uses before ordering. Do I need any tools to install this? Basic hand tools to access the interior panel (typically a nut driver or screwdriver) plus needle-nose pliers to release the old mounting clip. Because this version uses a plug-style connector, no wire strippers, cutters, or splice connectors are needed — unlike the genuine OEM splice-kit version. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical resistance curve, mounting position, and temperature-sensing function of the original W10316760 thermistor used in compatible Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

(4 Pack) XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE Product Description Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing. Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277. Compatibility: Compatible with models including but not limited to: LG: LSC24971ST/00, LRSC21934SW Kenmore: 79571039010, 79571039011, 79578789801 GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers. 🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals. 💪 Reliable Performance: Ensures precise activation of ice and water dispensing. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues. Product Specification Part Number: XPARTCO 6600JB3001E Component Type: Refrigerator dispenser micro switch Material: Plastic housing, metal contacts Electrical Rating: 16A 1/2HP, 125/250VAC Mounting: Snap-in or screw-mounted, 1/4" terminals Operating Conditions: Suitable for refrigerator dispenser environments Compliance: UL listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today! Add to cart now for a reliable fix!

Read more less

Genuine GE OEM Refrigerator Part GE WR14X29279 Freezer Genuine OEM Door Gasket White magnetic freezer-door gasket for select GE, Haier, and Hotpoint top-mount refrigerators. Product Overview WR14X29279 is a Genuine GE OEM freezer door gasket. The gasket seals around the freezer door to help keep warm, humid room air from entering the freezer compartment. A torn, hardened, twisted, or poorly sealing gasket can contribute to frost buildup, temperature instability, longer compressor run times, and moisture around the freezer opening. Quick Answer This listing is for one white Genuine GE OEM freezer door gasket, part WR14X29279. It is used on select compact GE, Haier, and Hotpoint top-mount refrigerators. Verify the complete appliance model number before ordering. Common Problems This Part May Fix Torn or cracked freezer door gasket Visible gaps around the freezer door Frost or moisture near the door opening Warm air entering the freezer compartment Freezer door does not seal tightly Refrigerator runs longer because of an air leak Replaces and Cross-References WR14X29279, 312240100333, AP6328743, AGE28324, PD00077451 Cross-reference numbers are provided for identification. Always verify fit by complete appliance model number. Compatibility Compatible with select GE, Haier, and Hotpoint compact top-mount refrigerators. Verified model examples include: HA10TG21BSW HA10TG21CSW HA10TG21SW HA12TG21SW HPS10LGVBRWW VPS10FGMAWW VPS10FGMBWW VPS10FGMCWW Partial model list only. Similar refrigerators may use a different fresh-food or freezer gasket depending on cabinet size, door color, and production revision. Key Features Genuine GE OEM replacement part Freezer door gasket / magnetic seal White finish Helps prevent warm-air infiltration Designed for select GE, Haier, and Hotpoint refrigerators Factory-fit replacement for compatible models Product Specifications Part Number: WR14X29279 Brand: GE Appliances Part Type: Freezer Door Gasket Color: White Condition: New Quality: Genuine OEM Package Quantity: 1 Gasket Installation Notes Unplug the refrigerator before service. Temporarily move food to a safe cold location while the freezer door is open. Remove the original gasket according to the appliance service procedure. Install the replacement evenly around the door perimeter, making sure all corners and edges are fully seated. Close the door and inspect the entire perimeter for gaps. Shipping crease tip: If the gasket arrives folded or creased, warm it gently with warm water or a hair dryer on low heat, then allow it to relax into shape. Do not overheat the gasket. Frequently Asked Questions Is WR14X29279 the freezer gasket or refrigerator-door gasket? WR14X29279 is the freezer door gasket. The fresh-food door can use a different gasket on the same refrigerator. Is this Genuine GE OEM? Yes. WR14X29279 is a Genuine GE Appliances replacement part. Is the gasket white? Yes. This part is the white freezer-door gasket version. Can I install it if it arrives with folds? Yes. Shipping folds can usually be relaxed by gently warming the gasket before installation. Shop With Confidence For best results, compare your complete refrigerator model number before ordering. Door gaskets can look nearly identical while differing in size, magnetic profile, color, or mounting design. Genuine GE OEMFreezer Door GasketWhiteCompatibility Support

Read more less

XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE Product Description Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing. Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277. Compatibility: Compatible with models including but not limited to: LG: LSC24971ST/00, LRSC21934SW Kenmore: 79571039010, 79571039011, 79578789801 GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers. 🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals. 💪 Reliable Performance: Ensures precise activation of ice and water dispensing. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues. Product Specification Part Number: XPARTCO 6600JB3001E Component Type: Refrigerator dispenser micro switch Material: Plastic housing, metal contacts Electrical Rating: 16A 1/2HP, 125/250VAC Mounting: Snap-in or screw-mounted, 1/4" terminals Operating Conditions: Suitable for refrigerator dispenser environments Compliance: UL listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today! Add to cart now for a reliable fix!

Read more less

Choice 4389102 Refrigerator Ice Level Control Board Replaces W11629974 The Choice 4389102 is a Choice-tier replacement ice level control board kit for Whirlpool refrigerators, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models with a vertical ice container in the freezer door. This kit uses an infrared beam between an emitter and receiver board to sense the level of ice in the ice bucket, signaling the ice maker to produce more ice when the level drops and to stop when the bucket is full. Weighs approximately 0.23 lbs. Common causes of failure include electrical problems, general wear and tear, or damage from power surges or short circuits. Symptoms of a failing ice level control board include the ice maker not producing ice, the ice maker not stopping production when full, irregular or inconsistent ice production, or error codes related to the ice maker control system. It directly replaces W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489. Quick Answer The Choice 4389102 Refrigerator Ice Level Control Board fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators where the ice maker isn't producing ice, won't stop when full, or produces ice inconsistently. Emitter and receiver board kit — both boards need replacing together. Replaces W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489. Control boards are commonly misdiagnosed — check more commonly defective parts first, and use the LED status light blink pattern to confirm this board is actually at fault before replacing it. What's In The Kit Component Function Emitter Board Sends an infrared beam across the ice bucket opening. Receiver Board Detects whether the beam is blocked by ice, signaling the ice maker to start or stop production. Both boards need to be replaced together — this is a matched emitter/receiver pair, not two independently interchangeable parts. What Is a Choice Part? Choice parts are manufactured by a different supplier than the original appliance manufacturer, offering a dependable, cost-effective alternative to Genuine OEM parts. Unlike our OE parts, which come from the same supplier as the original manufacturer, Choice parts are made by an independent manufacturer to equivalent fit, form, and function specifications. This makes them a smart option when you want a reliable repair at a lower price point than Genuine OEM. Common Problems This Kit Fixes Ice maker not producing ice Ice maker not stopping production when the bucket is full Irregular or inconsistent ice production Error codes related to the ice maker control system Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator ice level control board kit directly replaces the following OEM and cross-reference part numbers: W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This ice level control board kit is compatible with select Whirlpool refrigerators with a vertical ice container in the freezer door, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators built on the Whirlpool platform, including model numbers such as KSRI25FNWH01, ED5FHAXSQ01, KSRG25FVMS05, KSRU25FKWH03, KSRK25XLSS10, JBSS42E22L00, JBSS48E22L00, KBSD702MPS00, KBSD702MSS00, KBSD706MPS00, KBSD708MBS00, KBSD708MPS00, KBSD708MSS00, and Kenmore 106.57979700, 106.51552103, and 106.58169704. Note: This kit is specifically for refrigerators where ice cubes dump directly into an ice bin located in the freezer door. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Choice-tier replacement ice level control board kit — includes matched emitter and receiver boards Resolves "no ice production," "won't stop when full," and "inconsistent ice production" symptoms Uses an infrared beam to detect ice level in the bucket Direct drop-in replacement matching the original mounting and connections Replaces W11629974, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, TJ4389102R, W10193666, W10193840, W10290817, W10757851, W11553040, W11553041, AP7205486, AP5956767, AP3137510, PS557945, PS10064583, EAP16875489, PS16875489, AWP45901, and PD00086112 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators Manufactured by an independent supplier to equivalent fit, form, and function specifications DIY-friendly repair, typically 10 to 20 minutes Product Specifications Part Number 4389102CM OEM Part Number W11629974 Part Type Refrigerator Ice Level Control Board Kit (Emitter & Receiver) Designation Choice Weight Approx. 0.23 lbs Function Uses an infrared beam to sense ice level and signal the ice maker Application Refrigerators with vertical ice container in freezer door Repair Difficulty Easy — 10 to 20 minutes Quantity 1 kit (emitter + receiver board) Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Unplug Refrigerator Before Starting — Confirm With The LED Test Before Replacing Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Before installing this kit, confirm the boards are actually at fault: with the refrigerator still plugged in, check the status light on the control board — it should blink twice, pause, then repeat during normal operation. With the freezer door open, hold down the flapper door on the left side to block the optics beam; the LED should light up and stay on with no blinks. If it continues to blink twice instead, the optics control board has failed. If there's no LED light at all, hold down the freezer light switch — the LED should flash every second while in harvest mode; if it doesn't light up, the board has failed. Once confirmed, unplug the refrigerator, locate the emitter and receiver boards near the ice bucket opening in the freezer door, and disconnect their wiring. Remove the mounting screws or clips securing the old boards and take them out. Install both new boards from this kit in the same positions, reconnect the wiring fully, and secure the mounting hardware. Restore power and monitor ice production over the next day or two to confirm normal operation. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My ice maker stopped making ice. Is this the part I need? Possibly, but control boards are commonly misdiagnosed. Before replacing this board, check more commonly defective parts first — such as the water inlet valve, ice maker assembly itself, or the freezer temperature. If you've ruled those out and the other components are working properly, this control board is a reasonable next step. How can I confirm this board has actually failed before replacing it? Check the LED status light's blink pattern. During normal operation it should blink twice, pause, then repeat. With the freezer door open, hold down the flapper door on the left side to block the beam — the light should turn solid with no blinking. If it keeps blinking twice instead, or doesn't light up at all when it should be in harvest mode (checked by holding the freezer light switch), the board has failed. Do I need to replace just the emitter or receiver, or both? Both. This kit includes a matched emitter and receiver board, and both need to be replaced together as a pair rather than swapping just one side. What does "Choice" mean for this part? Choice parts are manufactured by an independent supplier, different from the appliance's original manufacturer, and built to equivalent fit, form, and function specifications. This gives you a dependable, lower-cost alternative to a Genuine OEM part, distinct from our OE parts, which are sourced from the same supplier as the original manufacturer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Choice Quality Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WH23X38617 Genuine OEM GE Washer Drain Pump Filter with Seal The WH23X38617 is a Genuine OEM GE replacement drain pump filter with seal, compatible with select GE, GE Profile, and GE 2-in-1 Washer/Dryer Combo models. The pump filter sits inside the drain pump housing and traps lint, coins, hair, and small debris before they reach the pump impeller. Keeping this filter clean and intact is essential for proper drainage — a clogged or damaged filter causes slow draining, standing water in the tub, and can strain the drain pump over time. This genuine OEM part is manufactured by GE to factory specifications and includes both the pump filter and the seal. The seal prevents leaks at the pump clean-out when the filter is installed correctly. The filter body is blue plastic with rubber seal components, measuring approximately 6" L x 3" W x 3" H. It directly replaces part number AP7243923 and installs with a simple counterclockwise removal and clockwise installation — no special tools required. Quick Answer The WH23X38617 Genuine OEM GE Washer Drain Pump Filter with Seal fixes GE washers that drain slowly, leave standing water in the tub, or leak near the pump access panel. The filter traps lint and debris to protect the pump impeller. Includes filter and seal. Blue plastic/rubber, approx. 6" L x 3" W x 3" H. Twist-out installation — no tools needed. Compatible with GE, GE Profile, and GE 2-in-1 Washer/Dryer Combo models. Common Problems This Part Fixes Washer draining slowly or not draining at all after a wash cycle Standing water remaining in the drum at the end of a cycle Water leaking from the pump filter access panel at the front of the washer Error codes related to drain or pump failure on compatible GE models Unusual noise from the drain pump caused by debris reaching the impeller Cracked, stripped, or missing filter cap allowing debris into the pump housing Damaged or deteriorated seal causing leaks at the filter access port Replaces Part Numbers This drain pump filter directly replaces the following part numbers: WH23X38617, WH23X38617, FIX17874614, AGE1014282, PD00090185, AP7243923, PS17874614. Contact our support team with your model number if you need help confirming compatibility before ordering. Compatibility This drain pump filter is compatible with select washers and laundry centers from the following GE product lines: GE front-load washers (select models) GE Profile front-load washers (select models) GE 2-in-1 Washer/Dryer Combo (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance Traps lint, coins, hair, and small debris to protect the drain pump impeller from damage Includes both the pump filter and seal — everything needed for a complete replacement Seal prevents water leaks at the pump filter access port when the filter is properly installed Blue plastic and rubber construction — durable and chemical resistant Dimensions: approximately 6" L x 3" W x 3" H Twist-out installation — turns counterclockwise to remove, clockwise to install; no special tools required Should be cleaned regularly (every 1–3 months) and replaced when cracked, stripped, or leaking Product Specifications Part Number WH23X38617 Part Type Washer Drain Pump Filter with Seal Condition Genuine OEM Application Front-load washers and 2-in-1 washer/dryer combos Approximate Dimensions 6" L x 3" W x 3" H Color Blue Material Plastic / Rubber Includes Pump filter and seal Installation Twist-out / twist-in — no special tools required Compatible Brands GE, GE Profile Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before servicing the drain pump filter. Place towels or a shallow pan beneath the filter access panel to catch residual water — there will always be some water remaining in the pump housing when you remove the filter. Locate the pump filter access panel at the lower front of the washer and open or remove it. Turn the old WH23X38617 filter counterclockwise to loosen and remove it. Clear any debris from the filter housing and wipe the area clean. Install the new filter and seal by inserting it into the housing and turning it clockwise until snug — do not overtighten. Close or reinstall the access panel, restore water supply and power, then run a short cycle to verify proper drainage and confirm there are no leaks at the filter port. Tip: Clean the pump filter every 1–3 months as part of regular washer maintenance to prevent buildup. Tools needed: None for the filter itself; a screwdriver may be needed to open the access panel on some models. Frequently Asked Questions What does the drain pump filter do? The drain pump filter catches lint, coins, hair, buttons, and other small items before they can reach the drain pump impeller. Without the filter, debris can jam or damage the impeller — leading to pump failure, loud grinding noises, or a washer that won't drain. The filter also acts as a cleanout access point so you can periodically remove accumulated debris without disassembling the pump. How often should I clean or replace the pump filter? GE recommends cleaning the pump filter every 1–3 months depending on how frequently you run the washer and how much lint your laundry produces. The filter should be replaced rather than just cleaned if it is cracked, stripped at the threads, or if the seal is damaged or missing — a compromised filter or seal will leak water from the access port. Why is water leaking from the front of my GE washer near the bottom? A leak at the lower front of the washer near the pump access panel is most often caused by a damaged or deteriorated pump filter seal, a cracked filter body, or a filter that is not fully tightened. Replacing the WH23X38617 pump filter and seal resolves this in most cases. Make sure the new filter is hand-tightened snugly — do not overtighten, as this can crack the housing. Will there be water when I remove the pump filter? Yes — there is always residual water in the drain pump housing. Before removing the filter, place towels and a shallow pan or tray directly under the access panel to catch the water. The amount varies depending on how much water remains in the washer after the last cycle. Running a drain-only cycle immediately before removing the filter will minimize the amount of water released. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same pump filter and seal that GE installs in compatible models from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout  

Read more less

XPARTCO DA32-00024W Refrigerator Temperature Sensor The XPARTCO DA32-00024W is an aftermarket replacement temperature sensor for Samsung refrigerators. This sensor senses the temperature inside the refrigerator and sends that information to the electronic control board, which uses it to regulate cooling and, on many models, manage the defrost cycle. The manufacturer designation for this sensor is "SENSOR TEMP;NW2,5V,R-DEF," indicating its role in the defrost-related temperature monitoring circuit. Over time, the sensor's electronics can drift out of calibration or fail outright from age or moisture exposure. A failing sensor typically shows up as inconsistent cooling, temperatures that run warmer or colder than the set point, or increased energy consumption as the refrigerator's control struggles to compensate for inaccurate temperature readings. It directly replaces AP5579174, 3955001, and PS4138632. Quick Answer The XPARTCO DA32-00024W Refrigerator Temperature Sensor fixes Samsung refrigerators with inconsistent cooling, temperatures running warmer or colder than expected, or increased energy consumption. Replaces AP5579174, 3955001, PS4138632. This sensor is tied to defrost-related temperature monitoring on many models — if you're also seeing frost buildup or defrost cycle issues, this sensor is worth checking alongside the defrost thermostat or heater. Common Problems This Part Fixes Inconsistent cooling in the refrigerator or freezer compartment Temperature running warmer or colder than the set point Increased energy consumption from the refrigerator overcompensating Temperature fluctuations affecting food freshness Defrost cycle irregularities on models where this sensor is part of that circuit Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers: DA32-00024W, 3955001, AP5579174, ASM30135, EAP4138632, PD00030760, PS4138632. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select Samsung refrigerators, including model numbers RS25H5111SR and RF4287HARS. Note: Samsung uses several different temperature sensors across its refrigerator lineup, including sensors for different compartments and functions. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which sensor your refrigerator needs. Key Features Aftermarket replacement temperature sensor — monitors internal refrigerator temperature Resolves "inconsistent cooling," "temperature off target," and "high energy use" symptoms caused by sensor failure Reports temperature data to the electronic control board for cooling and defrost regulation Direct drop-in replacement — no modification required Replaces AP5579174, 3955001, and PS4138632 Compatible with Samsung refrigerators Aftermarket replacement built to OEM-equivalent quality standards Straightforward installation Product Specifications Part Number XPDA32-00024W OEM Part Number DA32-00024W Part Type Refrigerator Temperature Sensor Condition Aftermarket Replacement Brand XPARTCO Manufacturer Designation SENSOR TEMP;NW2,5V,R-DEF Function Senses internal temperature and reports to the electronic control Repair Difficulty Easy Quantity 1 temperature sensor Compatible Brand Samsung Installation Notes ⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator and safely store any food that could spoil while the power is off before installing this part. Wear work gloves to protect your hands. Locate the old temperature sensor per your model's service diagram, since its position varies by refrigerator model. Photograph the wiring connection before disconnecting anything. Disconnect the wiring harness from the old sensor, remove any mounting clips or fasteners holding it in place, and pull it free. Install the new DA32-00024W in the same position, reconnect the wiring harness fully, and secure any mounting hardware. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling has returned. Tools needed: Phillips screwdriver (model-dependent), work gloves. Frequently Asked Questions My refrigerator's temperature seems inconsistent. Is this the part I need? Yes, this is a common symptom of a failing temperature sensor. Since this sensor is what reports internal temperature to the control board, a drifting or failed sensor can cause the refrigerator to run warmer or colder than intended, or to cycle inconsistently as the control tries to work from inaccurate data. What does the "R-DEF" in this sensor's designation mean? This suggests the sensor plays a role in the refrigerator's defrost-related temperature monitoring on applicable models. If you're seeing frost buildup or defrost cycle problems in addition to general cooling inconsistency, this sensor is worth checking alongside other defrost system components, such as the defrost thermostat or heater. Is this a difficult repair? No, replacing this sensor is generally a straightforward repair once you've located its mounting position, which can vary by model. It typically involves disconnecting a wiring harness and removing a small mounting clip or fastener. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the sensing function, voltage reference, and mounting configuration of the original DA32-00024W sensor used in compatible Samsung refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less