Search results for "refrigerator water filters"

XPARTCO HS810 Refrigerator 3-in-1 Hard Start Kit 1/12 to 1/5 HP 120V The XPARTCO XPHS810 is a universal 3-in-1 hard start kit that combines a solid-state starting relay, a start capacitor, and thermal overload protection into a single prewired unit for refrigerator and freezer compressors rated 1/12 to 1/5 HP at 120V (110–125VAC). It's designed as a direct equivalent to the widely used Supco RCO810 and similar kits, giving a struggling compressor extra starting torque to overcome internal friction and gas pressure at startup — commonly used to fix the classic "click-buzz-click" no-start symptom without replacing the entire compressor. The kit is fully prewired with color-coded leads (typically black = Common, white = Start, red = Run) and mounts directly onto the compressor's terminal pins, with instructions printed on the unit itself. It directly replaces Supco RCO810, URCO810, URC0810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, ERPU810, HS8, HS810, HS81, PCS810, and Mars 32781. Installs in 15–30 minutes with basic hand tools. Quick Answer The XPARTCO HS810 3-in-1 Hard Start Kit fixes refrigerators and freezers whose compressor makes a repeated "click-buzz-click" sound and fails to start, or that shut off on thermal overload during startup. Combines relay, start capacitor, and overload protector in one prewired unit for 1/12 to 1/5 HP compressors, 120V, 3.5A RLA. Replaces Supco RCO810, URCO810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, HS8, HS810, HS81, PCS810, Mars 32781. Do not install on LG linear/inverter compressors — see Installation Notes. Common Problems This Part Fixes Compressor makes a repeated "click-buzz-click" noise and fails to start Refrigerator or freezer runs warm because the compressor won't stay running Compressor hums but doesn't start, then trips off on overload Refrigerator cycles on and off rapidly without reaching temperature Older or worn compressor that starts hard, especially after a power outage ⚠ Capacitor Hazard — Read Before Servicing This kit contains a start capacitor, which can store a dangerous electrical charge even after the refrigerator is unplugged. Always disconnect power before servicing, and discharge the capacitor safely (using an insulated-handle resistor tool or by briefly shorting the terminals with an insulated screwdriver) before handling it. Never touch capacitor terminals with bare hands. If you are not comfortable working around stored electrical charge, have this repair performed by a qualified technician. Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This 3-in-1 hard start kit directly replaces the following OEM and cross-reference part numbers: XPHS810, RCO810, URCO810, URC0810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, ERPU810, HS8, HS810, HS81, PCS810, Mars 32781 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This universal hard start kit is compatible with refrigerator and freezer compressors in the following range: Compressors rated 1/12 HP through 1/5 HP 120V (110–125VAC) single-phase compressors Standard PSC (permanent split capacitor) and RSIR compressor types across Whirlpool, GE, Frigidaire, LG, Samsung, and most other major brands Important: Do NOT install this kit on LG linear/inverter compressors, or any compressor using a variable-speed inverter board (often labeled "Inverter," "Linear," "BLDC," or "Digital"). Connecting a standard hard start kit to an inverter-driven compressor can destroy the inverter control board. Check your compressor's label before ordering, or contact our support team with your model number if you're unsure. Key Features 3-in-1 design combines starting relay, start capacitor, and thermal overload protector in one prewired unit Delivers additional starting torque to help a struggling compressor overcome startup friction and gas pressure Resolves "click-buzz-click," "won't start," and "trips on overload" symptoms on eligible compressors Rated for 1/12 to 1/5 HP compressors at 120V, 3.5A RLA Prewired, color-coded leads with instructions printed on the unit for straightforward installation Can operate with or without an existing run capacitor Replaces Supco RCO810, URCO810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, HS8, HS810, HS81, PCS810, and Mars 32781 Aftermarket replacement built to OEM-equivalent quality and safety standards Product Specifications Part Number XPHS810 Equivalent To Supco RCO810 / RC0810 Part Type 3-in-1 Refrigerator/Freezer Hard Start Kit (Relay, Capacitor, Overload) Condition Aftermarket Replacement HP Range 1/12 to 1/5 HP Voltage 120V (110–125VAC) Current Rating 3.5A RLA Terminal / Wire Color Code Black = Common (C), White = Start (S), Red = Run (R) — typical; confirm against included diagram Not Compatible With LG linear/inverter compressors Installation Notes ⚠️ Unplug Refrigerator Before Starting — Discharge Capacitor Safely Disconnect power before beginning. Before touching any wiring, check your compressor's data label to confirm it is NOT a linear/inverter/BLDC compressor — this kit is not compatible with those and can damage the inverter board if connected. Access the compressor compartment, typically at the rear or bottom of the unit. Remove the existing relay/overload assembly by gently pulling it straight off the compressor terminal pins — do not force or twist. Use a multimeter to confirm which pins are Common (C), Start (S), and Run (R) if not already labeled. Connect the hard start kit's wires to the matching pins. Wire the kit's main power leads into the refrigerator's supply wiring using wire nuts, following the included diagram. Secure the kit with zip ties or its mounting strap to prevent vibration damage during compressor operation. Restore power and confirm the compressor starts smoothly without repeated clicking. Tools needed: nut driver or screwdriver, digital multimeter, wire nuts, insulated screwdriver (for capacitor discharge). Frequently Asked Questions My compressor makes a clicking or buzzing sound and won't start — will this fix it? A hard start kit resolves this in many cases, especially on older or worn compressors that struggle to overcome internal gas pressure at startup. However, "click-buzz-click" can also indicate a failing compressor winding or a compressor nearing end of life. If the hard start kit doesn't resolve the issue, the compressor itself may need replacement — a hard start kit can extend a marginal compressor's life but can't revive one with failed internal windings. Can I use this on any refrigerator? This kit works on standard PSC and RSIR compressors within the 1/12 to 1/5 HP range at 120V. It is NOT compatible with LG linear/inverter compressors or any variable-speed inverter-driven compressor — connecting it to one of those can destroy the inverter control board. Check your compressor's label for "Inverter," "Linear," "BLDC," or "Digital" before ordering. Do I need to remove my existing start capacitor or relay first? Yes — remove the old relay/overload assembly from the compressor terminal pins before installing this kit. The XPHS810 is designed to work with or without an existing separate run capacitor remaining in the circuit, but the old start relay and any old start capacitor should be removed and replaced by this kit, not left in place alongside it. Is this safe to install myself? Many DIYers install hard start kits successfully, but this repair involves a capacitor that can hold a dangerous electrical charge even after the unit is unplugged, plus correctly identifying compressor terminals. If you're not comfortable working around stored electrical charge or don't have a multimeter to confirm terminal identification, we'd recommend having a qualified technician perform this repair. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WR55X10025 Refrigerator Temperature Sensor The XPARTCO WR55X10025 is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with a wide range of GE, Hotpoint, Haier, Café, and Monogram refrigerators. The temperature sensor monitors air temperature inside the fresh food and freezer compartments and sends that data to the main control board, which uses it to regulate cooling cycles and maintain the correct set temperature. When the sensor fails, the refrigerator may run too warm, too cold, or experience erratic defrost behavior. This sensor measures approximately 1-1/4 inches long and includes 18-inch wire leads. It is constructed from white plastic and is used in both fresh food and freezer compartments depending on the model — on some models it also functions as a defrost sensor on the evaporator coil. It directly replaces OEM part numbers WR55X10025 and a large number of earlier GE thermistor part numbers. Sold individually — some models require two sensors. Installs in under 30 minutes with basic hand tools. Quick Answer The XPARTCO WR55X10025 Refrigerator Temperature Sensor fixes GE and Hotpoint refrigerators that are too warm, too cold, not defrosting, or over-defrosting. The thermistor monitors compartment temperature and communicates with the control board. Approx. 1-1/4" long with 18" leads, white plastic. Compatible with GE, Hotpoint, Haier, Café, and Monogram refrigerators. Sold individually. Common Problems This Part Fixes Refrigerator compartment running too warm — food spoiling faster than normal Refrigerator running too cold — food or liquids freezing in the fresh food section Freezer section not maintaining correct temperature Refrigerator not defrosting or defrosting too frequently Excessive frost or ice buildup on evaporator coils Refrigerator and freezer both warming up after extended defrost cycles Erratic cooling — temperatures fluctuating unpredictably Replaces Part Numbers This temperature sensor directly replaces the following OEM and cross-reference part numbers: WR55X10025, 914093, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025-50PK, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11151, WR55X11152, AH304103, EA304103, OEM9556230, AP3185407, EAP304103, AGE29661, PD00000992, PS304103 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select refrigerators from the following brands: GE refrigerators (side-by-side, French door, top-freezer, and bottom-freezer) Hotpoint refrigerators Haier refrigerators (select GE-platform models) Café refrigerators Monogram refrigerators Note: Some GE refrigerator models use two or more temperature sensors. This part is sold individually. Check your model's parts diagram or contact our support team to confirm how many sensors your model requires before ordering. Key Features Monitors fresh food and freezer compartment temperatures and communicates readings to the main control board Also functions as a defrost sensor on the evaporator coil on applicable models Fits both fresh food and freezer positions White plastic construction — durable and resistant to refrigerator temperature extremes Direct replacement for WR55X10025 and over 30 earlier GE thermistor part numbers Compatible with GE, Hotpoint, Haier, Café, and Monogram refrigerators Sold individually — verify quantity needed for your model before ordering Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in under 30 minutes with basic hand tools Product Specifications Part Number WR55X10025 Part Type Refrigerator Temperature Sensor (Thermistor) Condition Aftermarket Replacement Application Fresh food compartment, freezer compartment, and evaporator coil (defrost sensor) depending on model Sensor Body Length Approximately 1-1/4 inches Color White Material Plastic Includes Sensor with wire leads Sold As Single sensor (some models require 2 — verify before ordering) Compatible Brands GE, Hotpoint, Haier, Café, Monogram Installation Notes ⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator from the power outlet before beginning any repair. To access the fresh food thermistor, locate the sensor on the left wall of the fresh food compartment — it may be clipped into a housing or bracket. Disconnect the wire connector and pull the old sensor out of its bracket. Slide the new WR55X10025 sensor into the bracket and reconnect the wire connector. To access the freezer or evaporator thermistor, remove the freezer shelves and back panel, then locate the sensor clipped to the evaporator coil bracket. Remove any tie wrap securing the sensor, pull the old sensor from the bracket, insert the new sensor, and reconnect the wire connector. Reinstall the back panel and shelves, restore power, and verify the refrigerator returns to the correct set temperature. Tools needed: Phillips screwdriver, flat pry tool (for panel clips), work gloves. Frequently Asked Questions How many temperature sensors does my GE refrigerator have? The number of sensors varies by model. Many GE French door and side-by-side refrigerators use two or three WR55X10025 sensors — one in the fresh food compartment, one in the freezer, and sometimes one on the evaporator coil. Check your model's parts diagram or contact our support team with your model number to confirm how many you need before ordering. What is a thermistor and how does it work? A thermistor is a type of resistor whose electrical resistance changes with temperature. The main control board sends a small voltage through the thermistor and measures the resistance — a higher resistance means a lower temperature, and a lower resistance means a higher temperature. The board uses this reading to decide when to run the compressor and fans to maintain the set temperature. A failed thermistor sends incorrect readings, causing the refrigerator to over-cool, under-cool, or malfunction during defrost cycles. Can a faulty temperature sensor cause the refrigerator to not defrost? Yes. On models where the WR55X10025 also serves as the defrost sensor on the evaporator coil, a faulty sensor can cause the control board to incorrectly time or skip defrost cycles entirely — leading to excessive frost or ice buildup on the evaporator coils. This frost buildup can eventually block airflow and cause both the refrigerator and freezer sections to warm up. How do I know if my temperature sensor is the cause of my cooling problem? The most reliable way to test the thermistor is with a multimeter. Disconnect the sensor and measure its resistance at room temperature — a working WR55X10025 should read approximately 16,000 ohms at 32°F, dropping as temperature increases. An open circuit (infinite resistance) or short circuit (zero resistance) reading confirms the sensor has failed. If resistance is within the normal range but the refrigerator still has issues, the control board or other components may be at fault. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from durable plastic to match the dimensions and performance specifications of the original WR55X10025 temperature sensor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

XPARTCO D111-25GR Refrigerator Universal Directional Spun Copper Drier The XPARTCO D111-25GR is a universal spun copper filter drier for domestic and commercial refrigerators, freezers, and air conditioners. Installed in the sealed refrigerant line, this drier filters the refrigerant as it circulates through the system, removing moisture and contaminants that would otherwise damage internal components or restrict refrigerant flow over time. This directional drier is suitable for both refrigeration and air conditioning systems, compatible with R12, R22, R502, and R134A refrigerants. It features a 1" diameter body, approximately 8-1/8" in length, with a 1/4" O.D. copper tubing inlet paired with a 1/4" Schrader valve, and a 1/4" O.D. outlet. Equipped with a molecular sieve filter element and a 25g silica gel particle fill, this drier's higher desiccant content is more suitable for large refrigerators, freezers, and commercial refrigeration equipment. Filter driers are typically replaced whenever the sealed system is opened for service — such as after a compressor replacement or a refrigerant leak repair — since a used drier that has already absorbed moisture won't provide adequate protection for a newly serviced system. This is a universal cross-brand part, fitting any refrigeration system conforming to this filter drier's type and size specifications, and directly replaces ERD111, SUD111, PD111, TJ90SUD111, and WR86X25269. Quick Answer The XPARTCO D111-25GR Refrigerator Universal Directional Spun Copper Drier is installed in the sealed refrigerant line during service work such as a compressor replacement or refrigerant leak repair, filtering moisture and contaminants from the refrigerant. Compatible with R12, R22, R502, and R134A. 1" diameter, ~8-1/8" length, 1/4" O.D. copper tubing inlet with 1/4" Schrader valve, 1/4" O.D. outlet, molecular sieve filter element with 25g silica gel fill. Replaces ERD111, SUD111, PD111, TJ90SUD111, WR86X25269. This part must be installed by a qualified refrigeration or appliance technician — installation requires refrigerant recovery and brazing, and in the US, handling refrigerant legally requires EPA Section 608 certification. When This Part Is Used Replacing a filter drier as part of a compressor replacement Servicing the sealed system after a refrigerant leak repair General sealed-system service where the old drier has become saturated with moisture Restricted refrigerant flow traced to a clogged or failing drier Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This filter drier directly replaces the following OEM and cross-reference part numbers: ERD111, SUD111, PD111, TJ90SUD111, WR86X25269 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This is a universal XPARTCO filter drier compatible with a wide range of domestic and commercial refrigerators, freezers, and air conditioners across multiple brands, including GE (via WR86X25269). Note: Consult your appliance's service documentation or a qualified technician to confirm this drier's size and connection type are correct for your specific sealed system before purchasing. Contact our support team if you're unsure. Key Features Universal spun copper filter drier for refrigerators, freezers, and air conditioners Filters moisture and contaminants from refrigerant circulating through the sealed system Molecular sieve filter element Directional design 1" diameter, approximately 8-1/8" length 1/4" O.D. copper tubing inlet with 1/4" Schrader valve, 1/4" O.D. outlet Compatible with R12, R22, R502, and R134A refrigerants 25g silica gel fill — higher desiccant content suited to large refrigerators, freezers, and commercial refrigeration equipment Replaces ERD111, SUD111, PD111, TJ90SUD111, and WR86X25269 Compatible with a wide range of refrigeration and air conditioning brands Product Specifications Part Number D111-25GR Part Type Universal Directional Spun Copper Filter Drier Diameter 1" Length Approx. 8-1/8" Inlet 1/4" O.D. Copper Tubing + 1/4" Schrader Valve Outlet 1/4" O.D. Filter Element Molecular Sieve Desiccant Fill 25g Silica Gel Refrigerant Compatibility R12, R22, R502, R134A Recommended Use Large refrigerators, freezers, commercial refrigeration equipment Installation Professional/certified technician required — refrigerant recovery and brazing involved Compatibility Universal — multiple refrigeration and A/C brands Installation Requirements ⚠️ Professional Installation Required Installing a filter drier requires opening the sealed refrigerant system: recovering the existing refrigerant, brazing the new drier into the liquid line, evacuating the system to remove air and moisture, and recharging it with the correct refrigerant type and amount. This work involves pressurized refrigerant, an open flame or torch for brazing, and — in the United States — legally requires EPA Section 608 certification to purchase, handle, or recover most refrigerants. This is not a DIY repair. Have this part installed by a qualified, licensed refrigeration or appliance technician. Frequently Asked Questions Why does a refrigerator need a filter drier? A filter drier removes moisture and contaminants from the refrigerant as it circulates through the sealed system. Moisture inside a refrigeration system can cause internal corrosion, ice formation at restriction points, and acid formation that damages the compressor over time, so keeping the refrigerant clean and dry is essential to the system's long-term reliability. When does this part typically get replaced? A filter drier is normally replaced any time a technician opens the sealed system for service, such as during a compressor replacement or after repairing a refrigerant leak. Reusing an old drier after the system has been opened is not recommended, since a saturated drier no longer effectively removes moisture from the newly serviced system. Can I install this myself? No, this is not a DIY-appropriate repair. Installing a filter drier requires recovering refrigerant, brazing the new drier into the line, evacuating the system, and recharging it with refrigerant — all of which require specialized tools and training. In the United States, purchasing, handling, and recovering most refrigerants legally requires EPA Section 608 certification. This part should be installed by a qualified, licensed refrigeration or appliance technician. Is this an OEM or aftermarket part? This is a universal XPARTCO replacement part, manufactured to match the size, connection type, and desiccant specification of the original D111-family filter drier used across a wide range of refrigeration and air conditioning systems. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10613606 Refrigerator Compressor Start Relay and Capacitor The XPARTCO W10613606 is an aftermarket replacement compressor start relay and capacitor assembly compatible with a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn-Air, Admiral, Crosley, Dacor, Hardwick, Inglis, Litton, and Magic Chef refrigerators. The start relay is a small but critical electrical component that plugs directly onto the compressor terminals and provides the initial power surge needed to start the compressor motor. Once the compressor reaches operating speed, the relay drops out — leaving the compressor to run on its own. The capacitor (rated 15µF ±5%, 250VAC) works alongside the relay to store and release the burst of electrical energy needed on startup. When the start relay fails, the compressor cannot start — causing the refrigerator to stop cooling entirely. A failed relay typically produces a clicking sound every few minutes as the compressor tries and fails to start, followed by a short rest, then another attempt. This kit includes both the start relay and the CBB61 capacitor. It directly replaces W10416065, 8208290, 8208368, C8931605, 67003186, 67005560, 67005561, 67005562, 67003764, 8171210, and several additional cross-reference numbers. Installs in under 15 minutes — no tools required in most cases. Quick Answer The XPARTCO W10613606 Refrigerator Compressor Start Relay and Capacitor fixes refrigerators that are not cooling, are too warm, or are making a repeated clicking sound every few minutes as the compressor tries to start. Plugs directly onto the compressor terminals. Kit includes start relay and 15µF 250VAC CBB61 capacitor. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and more. Replaces W10416065, 8208290, C8931605, 67005560, and more. No tools required — installs in under 15 minutes. Common Problems This Part Fixes Refrigerator not cooling — compressor not running Freezer section too warm or not freezing Both refrigerator and freezer compartments gradually warming up Repeated clicking sound every 2–5 minutes from behind or underneath the refrigerator Compressor hums briefly then shuts off without reaching operating temperature Refrigerator runs but cannot maintain set temperature Shaking the start relay reveals a rattling sound inside — confirms internal failure Replaces Part Numbers This start relay and capacitor kit directly replaces the following OEM and cross-reference part numbers: W10613606, 67005560, 3023300, 67003186, 67003764, 67005561, 67005562, W10416065, 8171210, 8208290, 8208368, W10244032, 302TFBYY, SSP14R302TFR,  AWP41206, C8931605, PD00004905, EAP8746522, AP5787784, PS8746522. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This start relay and capacitor is compatible with select refrigerators from the following brands: Whirlpool refrigerators (side-by-side, French door, bottom-freezer) Kenmore / Sears refrigerators (select Whirlpool-built models) Maytag refrigerators KitchenAid refrigerators Amana refrigerators Jenn-Air refrigerators Admiral refrigerators Crosley refrigerators Dacor refrigerators Hardwick refrigerators Inglis refrigerators Litton refrigerators Magic Chef refrigerators Important: Always verify your refrigerator's model number and compare the old relay's shape and terminal configuration to the new part before installing. Some models may require trimming the wire connector tabs for a proper fit. Contact our support team with your model number if you need confirmation before ordering. Key Features Provides the initial electrical surge needed to start the compressor motor — without it, the compressor cannot run and the refrigerator cannot cool Kit includes both the start relay and the CBB61 run capacitor (15µF ±5%, 250VAC) — everything needed in one package Plugs directly onto the compressor terminals — no wiring or soldering required in most cases Quick rattle test — shake the old relay; if it rattles, the internal contacts have failed and it needs replacement Replaces W10416065, 8208290, C8931605, and over a dozen additional cross-reference part numbers Compatible with 13 major appliance brands on the Whirlpool platform Aftermarket replacement built to OEM-equivalent quality standards Fast DIY repair — installs in under 15 minutes, no tools required in most cases Product Specifications Part Number W10613606 Part Type Refrigerator Compressor Start Relay and Capacitor Kit Condition Aftermarket Replacement Application Refrigerator Compressor (side-by-side, French door, bottom-freezer) Capacitor Type CBB61 Run Capacitor Capacitor Rating 15µF ±5%, 250VAC Kit Includes 1x Start relay, 1x CBB61 capacitor Installation Plug-in — no tools required in most cases Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn-Air, Admiral, Crosley, Dacor, Hardwick, Inglis, Litton, Magic Chef Installation Notes ⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator from the power outlet before beginning. Move the refrigerator away from the wall to access the rear or lower back panel. Remove the rear access panel by unscrewing the retaining screws to expose the compressor. The compressor is a large black dome-shaped component — the start relay and capacitor assembly plugs onto the side terminals. Grip the old relay firmly and pull it straight off the compressor pins. Shake it — if it rattles, the internal contacts have failed and replacement is confirmed. Compare the old relay to the new W10613606 to confirm the terminal layout matches. Align the new relay with the compressor pins and press it firmly on. Reinstall the access panel, restore power, and listen for the compressor to start and run normally within a few minutes. Note: Some models may require trimming the wire connector tabs or reversing the connector orientation for a proper fit — do not force the connection. Tools needed: Phillips screwdriver (for panel access only). Frequently Asked Questions What does the compressor start relay do? The start relay plugs onto the compressor terminals and provides the brief but powerful surge of electrical current needed to start the compressor motor from a standstill. Once the compressor reaches operating speed — usually within a second or two — the relay drops out and the compressor runs on its own. Without a working start relay, the compressor cannot start at all, and the refrigerator stops cooling. The capacitor works alongside the relay to store and deliver the extra energy needed on startup. How do I know if my start relay has failed? The most reliable quick test is the rattle test: unplug the refrigerator, pull the start relay off the compressor, and shake it near your ear. A working relay is silent. A failed relay will rattle — the internal contacts have broken free and are loose inside the casing. Another sign is a repeated clicking sound every 2–5 minutes from the back of the refrigerator, where the compressor attempts to start, fails, trips the overload protector, rests, and tries again. If the fridge is warm and you hear clicking, check the relay first. What is the difference between the start relay and the capacitor? The start relay is the switching device that connects and disconnects the start winding of the compressor motor during startup. The capacitor stores a charge and releases it during startup to give the motor the additional torque it needs to get moving under load. Together they work as a startup system for the compressor. This kit includes both — replacing both at the same time ensures the complete startup circuit is fresh and reliable. My fridge is still not cooling after replacing the start relay — what else could it be? If replacing the start relay does not restore cooling, other possible causes include a failed compressor (the compressor runs but no longer builds pressure), a refrigerant leak in the sealed system, a failed start capacitor (if not replaced along with the relay), a bad overload protector, or a faulty main control board. Listen carefully after installing the new relay — if the compressor now starts and runs but the fridge still doesn't cool after several hours, a sealed system issue or refrigerant problem is likely and will require a certified technician. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical specifications and terminal configuration of the original W10613606 start relay and capacitor assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP 6750CL0001D Refrigerator Compressor Overload Protector Fits Specific LG, Kenmore Refrigerator Models. This Compressor Overload is an essential replacement part designed specifically for Specific Kenmore brand refrigerators. Compatible with a wide range of LG models, this overload ensures optimal cooling performance and extends the lifespan of your refrigerator. Replaces Part Number 6750CL0001D, AH3603394, EA3603394, AP5331981, PS3603394.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: California’s Proposition 65 

Read more less

WR84X10055 Genuine OEM Condenser Fan Motor Genuine GE part. GE brands include General Electric, Hotpoint, RCA, and others. Cross Reference Information: WR84X10055, 1093723, AH967775, EA967775, AP3797248, PS967775.     WARNING: California’s Proposition 65 (California Residents Only)

Read more less

WR55X10025 Genuine OEM GE Refrigerator Temperature Sensor The WR55X10025 is a genuine GE OEM temperature sensor, also called a thermistor, for GE, Hotpoint, and Kenmore refrigerators. This sensor measures air temperature inside the refrigerator or freezer compartment and reports it continuously to the main control board, which uses that reading to regulate the cooling cycle. On some models, this same sensor design also serves as the defrost sensor mounted on the evaporator coil, monitoring temperature there to help manage the defrost cycle. Because the control board relies entirely on this sensor's reading to make cooling decisions, a failing or inaccurate sensor can cause the refrigerator to run too cold, too warm, or run for excessively long periods as it tries to correct a temperature it's misreading. On models where it doubles as a defrost sensor, a failure here can also contribute to frost or ice buildup in the freezer. This is a relatively inexpensive part, and it's commonly the actual cause behind symptoms that get mistakenly blamed on the main control board. It directly replaces AP3185407, 914093, AH304103, EA304103, PS304103, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11150, WR55X11151, and WR55X11152. Quick Answer The WR55X10025 Genuine OEM GE Refrigerator Temperature Sensor fixes GE, Hotpoint, and Kenmore refrigerators that run too cold, too warm, run for excessively long periods, or (on models where this sensor doubles as a defrost sensor) show frost or ice buildup in the freezer. A healthy sensor reads approximately 5,000 ohms at 77°F. Replaces AP3185407, 914093, AH304103, EA304103, PS304103, and a wide range of WR50X/WR55X-prefix numbers listed below. This is an inexpensive part that's frequently the actual cause behind symptoms mistakenly blamed on the main control board — worth testing or replacing before assuming a costlier board repair is needed. Common Problems This Part Fixes Refrigerator running too cold Refrigerator running too warm Refrigerator running for excessively long periods Freezer not defrosting properly (on models where this sensor also serves as the defrost sensor) Freezer too cold or showing frost buildup Display temperature reading that doesn't match the actual temperature inside the compartment Inconsistent or fluctuating cooling performance Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers: WR55X10025, 914093, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025-50PK, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11151, WR55X11152, AH304103, EA304103, OEM9556230, AP3185407, EAP304103, AGE29661, PD00000992, PS304103 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select GE, Hotpoint, and Kenmore refrigerators, and is used broadly across most GE side-by-side and French door refrigerator configurations. Note: While this sensor is used across a very broad range of GE refrigerator models, always verify your full model number before ordering, since some models use a different sensor design. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified resistance curve for accurate temperature reporting Measures air temperature and reports it continuously to the main control board Also used as a defrost sensor on the evaporator coil on select models Resolves "too cold," "too warm," "runs too long," and "display reading doesn't match actual temperature" symptoms Direct drop-in replacement — matches the original mounting and wiring Replaces a wide range of WR50X and WR55X-prefix part numbers listed above Compatible with GE, Hotpoint, and Kenmore refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair, typically completed in under an hour Product Specifications Part Number WR55X10025 Part Type Refrigerator Temperature Sensor (Thermistor) Condition Genuine OEM Brand GE Function Measures compartment or evaporator temperature and reports it to the control board Typical Resistance Approx. 5,000 ohms at 77°F Repair Difficulty Easy — typically under 1 hour Quantity 1 temperature sensor Compatible Brands GE, Hotpoint, Kenmore Installation Notes ⚠️ Danger — Authorized Service Part Required For Flammable Refrigerant Systems GE's own service guidance carries an explicit warning for this component: it is a manufacturer-authorized service part intended for use in refrigerator models that use a flammable refrigerant, such as R600a. Using an unauthorized or incorrectly rated service part in a unit that uses a flammable refrigerant could lead to a risk of fire or explosion. Before ordering or installing, confirm your refrigerator's refrigerant type and verify this part is correct for your specific model. If you have any doubt about your refrigerant type or the correct part for your unit, contact our support team with your model number before proceeding, or have a qualified appliance technician perform this repair. ⚠️ Unplug Refrigerator Before Starting — Test With A Multimeter Before Replacing Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before replacing, it's worth testing the old sensor with a multimeter set to ohms — a healthy sensor reads approximately 5,000 ohms at 77°F; a reading well outside that range, or an open circuit, confirms a failed sensor. Locate the sensor, typically mounted on an interior wall of the compartment or clipped to the evaporator coil depending on your model. Photograph the wiring and mounting position before disconnecting anything. Disconnect the sensor's wire connector, remove any mounting clip or bracket, and pull the old sensor free. When positioning the new WR55X10025, make sure it sits in open air away from direct contact with ice buildup areas, since ice touching the sensor can cause it to read colder than the compartment's actual temperature. Reconnect the wire connector and secure the mounting clip. Restore power and monitor the refrigerator over the next 24 hours, comparing the display temperature to an independent thermometer placed in the compartment to confirm accuracy. Tools needed: multimeter, work gloves. Frequently Asked Questions How do I test whether this sensor has actually failed? Use a multimeter set to ohms and test the sensor across its two terminals. A healthy sensor typically reads approximately 5,000 ohms at 77°F room temperature; a reading significantly outside that range, or no reading at all (open circuit), confirms the sensor has failed and should be replaced. My display shows a temperature that doesn't match how cold the fridge actually feels. Could positioning be the issue, not the sensor itself? Yes, this is a documented and somewhat subtle failure mode. If the sensor ends up positioned too close to an area where ice or frost accumulates, the ice's surface temperature can pull the sensor's reading colder than the actual compartment air temperature, causing the display to show a colder number than reality — sometimes off by several degrees. One customer traced exactly this issue to ice buildup near the sensor location and resolved it by ensuring the new sensor sat clear of that ice-prone area during installation. Could my problem actually be the control board instead of this sensor? It's worth testing this sensor first before assuming a control board issue. This is a relatively inexpensive part, and it's commonly the actual root cause behind symptoms that get misdiagnosed as a control board failure, since the board is only ever as accurate as the temperature data it receives. Testing or simply replacing this sensor is a low-cost step worth taking before pursuing a more expensive board repair. Why is there a fire/explosion warning on this part? Some refrigerators use a flammable refrigerant, such as R600a (isobutane), instead of older non-flammable refrigerants. Electrical components near refrigerant lines can be a source of ignition if a leak were ever present, which is why GE requires an authorized, correctly rated service part for these systems rather than a generic substitute. Confirming your model and refrigerant type before ordering is the appropriate precaution. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original resistance curve and mounting configuration of the temperature sensor originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

241798231 Genuine OEM Frigidaire Refrigerator Ice Maker The 241798231 is a genuine Frigidaire OEM ice maker assembly for Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators. This 8-cube ice maker receives water from the refrigerator's water inlet valve, holds it in a mold, and freezes it into cubes. Once frozen, an internal mechanism ejects the cubes into the ice bucket below, and the cycle repeats automatically until the bucket is full — at which point a bail arm or sensor tells the ice maker to stop producing more. This assembly ships complete with its cover, wire harness, bail arm, and installation hardware, terminating in a 5-pin connector for a direct plug-in fit. Measuring approximately 11-3/4"L x 4-5/8"W x 4-3/4"H, with a harness and plug that run about 18" and a bail arm measuring 9-3/8"L x 1/8"W x 4-1/8"H. Over time, the plastic mold where the ice cubes actually form can flake, crack, or corrode, and internal mechanical components can wear out or fail electrically. If your ice maker's mold shows flaking or corrosion, or the unit has simply stopped producing ice, it's time for a new assembly rather than attempting a partial repair. It directly replaces AP6332951, 3206327, 3206329, 241642501, 241642503A, 241642511, 241798201, 241798209, 241798211, 241798220, 241798223, 241798224, 5303320545, 5304445222, 5304456669, 5304456671, 5304456672, EAP12364147, PD00044512, PS12085911, and PS12364147. Quick Answer The 241798231 Genuine OEM Frigidaire Refrigerator Ice Maker fixes Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators that have stopped making ice, or where the ice mold is visibly flaking or corroded. 8-cube ice maker with cover, wire harness, bail arm, and installation hardware included. 5-pin connector. Replaces AP6332951, 3206327, 3206329, 241642501, 241642503A, 241642511, 241798201, 241798209, 241798211, 241798220, 241798223, 241798224, 5303320545, 5304445222, 5304456669, 5304456671, 5304456672, EAP12364147, PD00044512, PS12085911, PS12364147. This is not a universal part — always verify your exact model number before ordering. Common Problems This Part Fixes Ice maker has stopped producing ice entirely Ice maker producing far less ice than it used to Ice mold visibly flaking, cracking, or corroded Ice cubes coming out misshapen, small, or inconsistent Ice maker cycling but never ejecting cubes into the bucket Ice maker that runs constantly without ever reaching a full bucket and stopping Ice maker that hums or makes noise but doesn't complete a cycle Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator ice maker directly replaces the following OEM and cross-reference part numbers: 241798231, 241798224, 5304456672, 241798201, 5304456671, 241642501, 241642503A, 241642511, 241798209, 241798211, 241798220, 3206327, 3206329, 4591526, 5303320545, 5304445222, 5304456669, 75304445222, 75304456669, 75304456671, 75304456672, AP6332951, AFR14980, PD00044512, PS12364147. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This ice maker is compatible with select Frigidaire refrigerators, and also fits select Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators built on the same platform, including model numbers such as FFSS2315TS0. Note — not a universal part: This ice maker is model-specific despite the broad cross-reference list above. Always verify your full model number before ordering rather than assuming fit based on a general brand match. Contact our support team with your model number if you're unsure. Key Features Genuine Frigidaire OEM part — factory-specified mold design and cycling mechanism Complete assembly — includes cover, 4-wire harness, bail arm, and installation hardware Produces 8 radius ice cubes per cycle Resolves "not making ice," "flaking or corroded mold," and "misshapen cubes" symptoms caused by ice maker failure 5-pin connector for a direct plug-in electrical fit Dimensions: 11-3/4"L x 4-5/8"W x 4-3/4"H; harness/plug approx. 18"L; bail arm 9-3/8"L x 1/8"W x 4-1/8"H Direct drop-in replacement — no modification required Replaces AP6332951, 3206327, 3206329, 241642501, 241642503A, 241642511, 241798201, 241798209, 241798211, 241798220, 241798223, 241798224, 5303320545, 5304445222, 5304456669, 5304456671, 5304456672, EAP12364147, PD00044512, PS12085911, and PS12364147 Compatible with Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 241798231 Part Type Refrigerator Ice Maker Assembly Condition Genuine OEM Brand Frigidaire Ice Output 8 radius cubes per cycle Kit Contents Ice maker, cover, 4-wire harness, bail arm, installation hardware Electrical Connector 5-pin Color White / Black / Gray Material Plastic / Metal Dimensions 11-3/4"L x 4-5/8"W x 4-3/4"H Harness/Plug Length Approx. 18" Bail Arm Dimensions 9-3/8"L x 1/8"W x 4-1/8"H Quantity 1 ice maker assembly Compatible Brands Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, Westinghouse Installation Notes ⚠️ Unplug Refrigerator And Shut Off Water Supply Before Starting Disconnect power at the outlet and shut off the water supply to the refrigerator before beginning. Wear work gloves. Open the freezer door and locate the ice maker assembly, typically mounted to the freezer wall or door depending on your model. Remove the ice bucket to improve access. Photograph the wiring harness connection before disconnecting anything. Remove the mounting screws securing the ice maker to the wall, then disconnect the wire harness connector and any water line connection feeding the unit. Remove the old ice maker fully. Install the new 241798231 assembly in the same mounting position, reconnect the wire harness connector, and reconnect the water line if applicable. Secure the mounting screws, reinstall the ice bucket, and restore the water supply and power. Allow several hours for the first cycle to complete and confirm ice is being produced and ejected into the bucket normally. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My ice maker's mold looks flaky or corroded. Should I replace the whole assembly? Yes. The ice mold is not a separately serviceable component on this assembly — if it's flaking, cracking, or corroded, that's a sign the assembly has reached the end of its service life and the complete unit should be replaced rather than repaired. My ice maker runs but never stops, or never seems to sense a full bucket. What does that mean? This can point to a failure in the bail arm or the internal sensing mechanism that tells the ice maker the bucket is full and it's time to pause production. Since the bail arm is included with this complete assembly, replacing the whole unit resolves this along with any other underlying cycling issues, rather than trying to source and repair that mechanism separately. The listing says this isn't a universal part even though it has a long cross-reference list. What does that mean for me? The long list of replaced part numbers reflects that this same physical assembly has been sold under many different numbers over the years and across related brands (Electrolux, Kenmore, Crosley, and others built on the same Frigidaire platform) — it does not mean this ice maker fits every refrigerator. Always confirm your specific model number before ordering, since visually similar ice makers can differ in ways that affect fit. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It includes the same mold design, wire harness, bail arm, and mounting configuration as the ice maker assembly originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Choice Refrigerator Replacement Part Choice W10515057 Refrigerator LED Light & Cover Replaces WPW10515057 Aftermarket 1-plug LED light module with tapered lens/cover for select Whirlpool-family side-by-side refrigerators. Product Overview The Choice W10515057 Refrigerator LED Light & Cover is an aftermarket replacement for Whirlpool WPW10515057. The assembly combines the LED light module with its tapered lens/cover to restore interior refrigerator illumination. This part is commonly used in select Whirlpool, Maytag, KitchenAid, Kenmore, and related side-by-side refrigerators. Quick Answer W10515057 / WPW10515057 is the 1-plug LED light and tapered lens/cover assembly. If your refrigerator uses a similar LED with 2 electrical plugs, verify the model before ordering because the related WPW10515058 configuration is different. Common Problems This Part May Fix Refrigerator interior light does not turn on LED light flickers or flashes Interior lighting is dim or intermittent Existing LED lens/cover is damaged One compartment light causes other linked LEDs to flicker Replaces and Cross-References WPW10515057, W10515057, W10398007, AP6022533, AWP51164, EAP11755866, OEM18067608, PD00031142, PS11755866 Cross-reference numbers are provided for identification. Choice is an aftermarket replacement brand and is not manufactured by Whirlpool Corporation. Compatibility Fits select Whirlpool, Maytag, KitchenAid, Kenmore, IKEA, and related refrigerator models. Verified examples include: WRS325FDAD02 WRS322FDAB00 WRS322FDAM04 WRS331FDDB00 WRS335FDDW01 WRS342FIAB04 WRS537SIAM00 KSF22C4CYY01 MSF25D4MDE03 ISF25D2XBM01 106.41159212 106.51124211 Important: This is only a partial compatibility list. Verify the complete refrigerator model number and the connector configuration before ordering. Key Features Quality Choice aftermarket replacement Replaces Whirlpool WPW10515057 LED light module with tapered lens/cover 1-plug electrical configuration White bezel / cover design Direct plug-in replacement on compatible models Product Specifications Choice Part Number W10515057CM Replaces OEM Number WPW10515057 Part Type Refrigerator LED Light & Cover Assembly Connector 1 electrical plug / 2-pin style connection Lens Style Tapered lens/cover Color White bezel Condition New Part Quality Aftermarket Replacement Installation Notes Disconnect refrigerator power before servicing. Locate the failed LED module and gently release the lens/bezel retaining tabs. Disconnect the existing electrical plug without pulling on the wires. Compare the connector and mounting shape with the replacement before installation. Connect the replacement LED module and snap the assembly securely into place. Restore power and confirm normal illumination. Diagnostic note: On some Whirlpool-family refrigerators, multiple LED modules are connected in the lighting circuit. One failed module can cause other lights to flicker or remain off. Verify the failed module before replacing parts. Frequently Asked Questions Does this include the LED light and cover? Yes. This listing is for the W10515057-style LED light module with its tapered lens/cover assembly. Does this replace WPW10515057? Yes. This Choice part is designed as an aftermarket replacement for WPW10515057 and earlier W10515057/W10398007 references. What is the difference between WPW10515057 and WPW10515058? WPW10515057 uses the 1-plug configuration. WPW10515058 is a different related LED configuration with 2 electrical plugs. Verify your refrigerator model and original connector before ordering. Is this a Genuine Whirlpool OEM part? No. This is a new Choice aftermarket replacement designed to replace the listed OEM part numbers. Shop With Confidence Verify the complete refrigerator model number before ordering. Our compatibility team can help confirm whether W10515057 / WPW10515057 is the correct LED module for your appliance. Choice Replacement LED Light + Cover 1-Plug Configuration Compatibility Support

Read more less

6600JB3001C Refrigerator Dispenser Switch – Replacement for GE, LG and Kenmore Product Overview This Dispenser Switch is a replacement part for specific LG, Kenmore, GE refrigerator models. This switch is crucial for the functionality of the water and ice dispenser, as it activates the dispensing mechanism when the user presses the lever or button. The switch ensures that the refrigerator dispenses water or ice on demand, providing convenience and ease of use. Replaces Part Numbers This dispenser switch replaces part numbers 6600JB3001C, 1268245, 1395586, 6600JB3001B, 6600JB3001H, PD00025340, EAP3529276, AH3529276, EA3529276, AP4441530, PS3529276, WR23X10783, 2695743, WR23X10171, WR23X10224, AP5688654, PS8259956. Engineered to deliver OEM-level performance and compatibility. Compatible Brands Compatible with LG and Kenmore refrigerators manufactured by LG. Fits various French door, side-by-side, and bottom-freezer models with front panel dispensers. Fixes the Following Issues Water or ice dispenser not working Dispenser works only when pressed a certain way No power reaching water or ice components Intermittent or unresponsive dispenser control Why Buy from Parts‑O‑Matic Durable and reliable aftermarket replacement Fast and free U.S. shipping Simple to install with plug-in compatibility Trusted by appliance repair techs and homeowners

Read more less

W10861170 Refrigerator Genuine Diffuser Replaces Part Numbers: W10861170, 4459449, OEM23997962, AP5999490, PS11731574, W10633587. Description: This air diffuser is an OEM part for select Whirlpool refrigerators. This air diffuser is responsible for evenly distributing cool air throughout the refrigerator compartment.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WR49X10152 Refrigerator Genuine OEM Control Board Replaces Part Numbers:  WR49X10152, 1266021, AH1483475, EA1483475, AP3957581, PS1483475, WR49X10092, WR49X10115, WR49X10121, WR49X10138, WR49X10147, WR55X10156, WR55X10414, WR55X10492, WR55X10530. Description: This is a replacement control board that has been manufactured by General Electric for use with specific refrigerator models.The control board is a critical component that ensures various refrigerator functions, such as defrost times and cooling, are properly regulated. This part should be replaced as soon as possible if faulty, otherwise the refrigerator may not be able to maintain a cold temperature or might not work at all. Before replacing this part, ensure the appliance is entirely disconnected from the power and water sources. Whenever attempting a repair, wear work gloves for protection.This part is suitable for use on a refrigerators that have been manufactured by General Electric, Hotpoint, RCA, and some other brands. This is a genuine OEM part and thus is manufactured from high-quality, durable, non-corrosive materials and is only sold individually.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less