5231JA2006F Refrigerator Water Filter
Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family. You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness.
Cross Reference Number: 5231JA2006G, 5231JA2006F, AP6889576, PS12724531, LT600P, LT600P/PC/PCS
WFCB Refrigerator Water Filter
Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family. You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness.
Replaces Part Numbers: WFCB, WF1CB, 218670303, 218710901, 218710902, 218717805, 218904602, 240389101, 240389102, 240394501, 242007903, 277187, 5303917752, 5303917836, 5303917937, 5303918017, 5304461598, 9906, 9906P, 9910, AH503627, EA503627, FRWFCB, AP2591529, PS503627, RC-101, RC-200, RC101, RC200, RENEW1CB, RENEWFCB, RG100, WF1CB-, WFB, WFCB-
XPARTCO 5304528029 Washer Water Valve
Dispenser Valve Gaskets are Not Included
Washer water inlet valve.
5 Solenoid Coils, 5 Outlets
Fits Specific Electrolux, Frigidaire front load washer models.
Replaces Part Numbers:5304528029, 5304514790, 5304522534, AP7014477, PS16544354.
Description: This Water Valve is a replacement part for specific Electrolux, Frigidaire washing machine models. This part controls the entry of water into the washer during the wash and rinse cycles. Common causes of a bad valve include mineral deposits from hard water, electrical issues, or general wear and tear over time.
This is an aftermarket part that can be used as a replacement for the OEM part.
00622058 Dishwasher Genuine OEM Water Valve
Fits Specific Bosch Dishwasher Models
Description: This dishwasher Water Inlet Valve is a Genuine OEM part for specific Bosch dishwasher models. This component is responsible for controlling the flow of water into the dishwasher. It operates via electrical signals from the dishwasher's control board, opening to allow water to enter during the fill cycle and closing to prevent water from entering during other cycles.
✅ Key Features:
Genuine OEM Part for Bosch #00622058
120V, 60Hz single solenoid valve
Includes mounting bracket and hose connection port
Durable thermoplastic construction
🔁 Replaces Part Numbers:
00622058, 1999956, 622058, AH3491417, AP4927070, EA3491417, PS3491417, PS8728724.
🔧 Fixes These Common Symptoms:
Dishwasher not filling with water
Low or slow water flow
Water inlet error codes
Humming or clicking without water intake
Leaking around the valve area
🧰 Compatible With:
✔️ Bosch✔️ Thermador✔️ Gaggenau✔️ Siemens(Check your model number or contact us for assistance.)
✅ Affordable aftermarket solution
✅ Always Fast and Free U.S. shipping
✅ Backed by helpful support and easy returns
✅ Trusted by DIYers and appliance techs
🛒 Restore your dishwasher’s performance — order the 00622058 water inlet valve today from Parts-O-Matic.com, and get it delivered fast and free.
ADQ36006101 Refrigerator Water Filter
Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family. You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness.
Cross Reference Number: ADQ36006101, 1615781, 1810370, ABFF5, AH3531958, EA3531958, LT700P, AP5594314, PS3531958, LT700P/PC/PCS
DA97-07603B Genuine OEM Samsung Refrigerator Ice Maker
The DA97-07603B is a genuine Samsung OEM ice maker assembly for Samsung and select Maytag refrigerators. This is the freezer ice maker, located inside the freezer compartment — it is not the in-door icemaker used on many other Samsung models. This is a plastic tray-style ice maker with a 9-cube flex tray design, an 8-pin connector, and includes a motor for ice ejection, a water valve to fill the mold, and a thermostat that senses temperature and signals when it's time to release the finished ice.
This complete assembly contains the entire ice maker and its housing. If the mold's coating is flaking, or internal components have stopped functioning, replacing the full assembly resolves both problems at once. Failure symptoms include the ice maker not producing ice, reduced ice production, or loud popping sounds coming from the ice maker during operation. It directly replaces DA61-03213B, DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313.
Quick Answer
The DA97-07603B Genuine OEM Samsung Refrigerator Ice Maker fixes Samsung and select Maytag refrigerators where the freezer ice maker has stopped producing ice, is making less ice than usual, or is making loud popping sounds during operation. 9-cube flex tray, 8-pin connector. Replaces DA61-03213B, DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313. This is the freezer ice maker — it does not fit an in-door icemaker, and it is not a substitute for the DA97-07603C icemaker used on other models.
Common Problems This Part Fixes
Ice maker has stopped producing ice entirely
Ice maker producing less ice than it used to
Loud popping sounds coming from the ice maker during operation
Ice mold coating visibly flaking or deteriorating
Ice maker cycling but not ejecting ice properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator ice maker directly replaces the following OEM and cross-reference part numbers:
DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This freezer ice maker is compatible with select Samsung refrigerators, and also fits select Maytag refrigerators built on the Samsung platform, spanning model series including RF220D, RF220N, RF221N, RF22A4, RF23HC, RF260BE, RF261BE, RF263TE, RF27T5, RF28HD, RF28HF, RF28R6, RF28T5, RF30HD, and RF323T, including specific model numbers such as RF220NCTABC/AAA-0001.
Note — freezer icemaker only, and not a substitute for DA97-07603C: This is a drop-in replacement for the freezer icemaker only. It will not fit an in-door icemaker used on many other Samsung models. It also replaces the earlier DA97-07603A version, but is not a suitable substitute for the DA97-07603C icemaker used on other models, despite the similar numbering. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which icemaker your refrigerator needs.
Key Features
Genuine Samsung OEM part — factory-specified mold design and cycling mechanism
9-cube flex tray design
Includes motor for ice ejection, water valve for mold fill, and thermostat for temperature sensing
Resolves "not making ice," "reduced ice production," and "loud popping sounds" symptoms
8-pin connector for a direct electrical fit
Complete assembly — includes the ice maker and its housing
Direct drop-in replacement for the freezer compartment icemaker
Replaces DA61-03213B, DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313
Compatible with Samsung and select Maytag refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
DA97-07603B
Part Type
Refrigerator Freezer Ice Maker Assembly
Condition
Genuine OEM
Brand
Samsung
Tray Style
Plastic, 9-cube flex tray
Connector
8-pin
Location
Freezer compartment (not an in-door icemaker)
Included Components
Ejection motor, water valve, thermostat, housing
Repair Difficulty
Easy — approx. 15 to 30 minutes
Quantity
1 ice maker assembly
Compatible Brands
Samsung, Maytag
Installation Notes
⚠️ Unplug Refrigerator And Shut Off Water Supply Before Starting Unplug the refrigerator from the power outlet and turn off the water supply before beginning. Wear work gloves. On bottom-freezer drawer-style models, most of the time in this repair goes toward removing the trays from the freezer and pulling the freezer door/drawer out for access — budget extra time for this step. Remove the ice maker cover by lifting it away from the housing. Remove the ice bucket and any cover plates blocking access. Photograph the wiring connection before disconnecting anything. Unscrew the ice maker from its housing, disconnect the water line connection and the 8-pin electrical connector, and carefully lift the old assembly out of its compartment. Install the new DA97-07603B in the same position, reconnect the water line and electrical connector fully, and secure it to the housing with its screws. Reinstall the ice maker cover, cover plates, and ice bucket, then replace the freezer trays and close the freezer door/drawer. Restore the water supply and power, then allow several hours for the first cycle to complete and confirm ice is being produced normally. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My ice maker makes loud popping sounds. Is this the part I need?
Yes, this is a documented symptom of a failing ice maker assembly, alongside reduced or stopped ice production. If you're hearing unusual popping noises during the ice-making cycle, replacing the complete assembly addresses the underlying mechanical or electrical issue rather than trying to isolate and repair a specific internal component.
My refrigerator has an in-door ice maker. Will this part fit?
No. This DA97-07603B is specifically a drop-in replacement for the freezer compartment icemaker and will not fit an in-door icemaker used on many other Samsung refrigerator models. Check where your current ice maker is physically located — inside the freezer versus built into the refrigerator door — before ordering.
Is this the same as the DA97-07603C icemaker I've seen for other models?
No. While this part does replace the earlier DA97-07603A version, it is explicitly not a suitable substitute for the DA97-07603C icemaker used on other Samsung models, despite the similar numbering. Always confirm your full model number rather than assuming based on a close part number match.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Samsung to factory specifications — guaranteed fit, materials, and performance. It matches the original mold design, motor, water valve, and thermostat configuration of the freezer ice maker originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO AJU75152601 Washer Water Inlet Valve Replaces 5221EA1008F, AJU73213301
The XPARTCO AJU75152601 is an aftermarket replacement washer water inlet valve assembly compatible with select LG and Kenmore top-load washers in the WT1, WT4, WT5, WT6, and WT7 series. This is a multi-port valve assembly that controls water flow from the household supply lines into the washer tub and dispenser compartments. The assembly contains multiple solenoid-operated valve ports: hot water inlet, cold water inlet, bleach dispenser valve, fabric softener dispenser valve, and jet spray valve — all integrated into a single assembly that connects to the washer's control board via wiring harnesses.
When the water inlet valve fails — or when one individual port fails — the washer may not fill at all, fill too slowly, fill with the wrong temperature, overfill, fail to dispense bleach or fabric softener, or leak from the valve body. The valve solenoids operate at 12V DC. This kit includes the complete valve assembly and two AGM73269501 inlet screens. It directly replaces AJU73213301, 5221EA1008F, 5221EA1008P, AGF76283896, AP6308239, TAW35618287, AH3527446, AJU75152603, EA3527446, PS3527446, and PS12374721. Installs in 15–25 minutes with basic hand tools.
Quick Answer
The XPARTCO AJU75152601 Washer Water Inlet Valve fixes LG and Kenmore top-load washers that won't fill, fill slowly, fill with wrong temperature, won't dispense bleach or fabric softener, overfill, or leak from the valve. Multi-port assembly with hot, cold, bleach, fabric softener, and jet spray valves. 12V DC solenoids. Includes 2 AGM73269501 inlet screens. Compatible with LG WT1xxx–WT7xxx and Kenmore 796-series. Replaces AJU73213301, 5221EA1008F, 5221EA1008P, AP6308239, TAW35618287, PS12374721.
Common Problems This Part Fixes
Washer not filling with water at all when a cycle is started
Washer filling very slowly — one or more valve ports partially blocked or failing
Washer filling with only hot or only cold water — one temperature solenoid has failed
Washer overfilling or filling continuously — valve port stuck open
Bleach dispenser not dispensing during the wash cycle
Fabric softener not dispensing at the correct rinse cycle point
Jet spray not activating during fill
Water dripping into the tub between cycles — valve port not closing completely
Water leaking from the valve body or connection points at the back of the washer
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
5221EA1008F, AJU73213301, AJU75152601, AH3527446, AJU75152603, EA3527446, PS3527446, ALG53778, AP6308239, PD00042814, PS12374721, TAW35618287.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select LG and Kenmore top-load washers from the following series:
LG top-load washers — WT1 series (WT1101CW, WT1201CW, WT1201CV, WT1301CW, WT1501CW, WT1701CW, WT1701CV, WT1801HVA, WT1801HWA and related models)
LG top-load washers — WT4 series (WT4801CW, WT4870CW, WT4970CW and related models)
LG top-load washers — WT5 series (WT5001CW, WT5070CW, WT5101HV, WT5101HW, WT5170HV, WT5270CW, WT5480CW, WT5680HVA, WT5680HWA and related models)
LG top-load washers — WT6 series (select models)
LG top-load washers — WT7 series (WT7200CW, WT7200CV, WT7500CW, WT7600HKA and related models)
Kenmore / Sears top-load washers — 796-series (79631512210, 79631512211, 79631522211, 79631502210, 79631502211 and related models)
Note: Always verify your exact model number before ordering. Newer LG WT7100/WT7150/WT7400/WT7405 series models use the AJU75152602 valve instead. Contact our support team with your model number to confirm the correct valve for your washer.
Key Features
Multi-port valve assembly — controls hot water, cold water, bleach dispenser, fabric softener dispenser, and jet spray from a single replaceable assembly
12V DC solenoid operation — responds to signals from the washer's control board to deliver the correct water to each compartment
Resolves fill, dispenser, overfill, and drip-when-off symptoms in a single replacement
Kit includes complete valve assembly and 2x AGM73269501 replacement inlet screens
ABS plastic and stainless steel construction — durable and resistant to mineral buildup
Replaces AJU73213301, 5221EA1008F, 5221EA1008P, AP6308239, TAW35618287, and over 10 additional cross-reference numbers
Compatible with LG WT1xxx through WT7xxx and Kenmore 796-series top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 15–25 minutes with basic hand tools
Product Specifications
Part Number
AJU75152601
Also Replaces
AJU73213301, 5221EA1008F (current supersession)
Part Type
Washer Water Inlet Valve Assembly (Multi-Port)
Condition
Aftermarket Replacement
Application
LG and Kenmore Top-Load Washers
Valve Ports
Hot water, cold water, bleach dispenser, fabric softener dispenser, jet spray
Solenoid Voltage
12V DC
Material
ABS plastic / Stainless steel
Kit Includes
Valve assembly + 2x AGM73269501 inlet screens
Compatible Series
LG WT1xxx, WT4xxx, WT5xxx, WT6xxx, WT7xxx; Kenmore 796-series
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off both the hot and cold water supply valves before beginning. Pull the washer away from the wall to access the back panel. The water inlet valve assembly is mounted on the upper rear of the washer — the external supply hoses connect to the hot and cold inlet ports. Photograph all wire harness connections and hose routing before disconnecting anything. Before installing, install the new inlet screens (AGM73269501) included in the kit into the hot and cold inlet ports of the new valve. Disconnect the old valve's external supply hoses, internal hoses, and wire harness connectors. Unscrew the mounting screws and remove the old valve. Install the new AJU75152601 valve, reconnect all hoses and wire harnesses in the same positions as documented in your photos, and secure the mounting screws. Reconnect the external supply hoses, restore water supply and power, and run a fill cycle to verify proper filling, confirm all dispenser ports activate at the correct cycle points, and check for leaks. Tools needed: Phillips screwdriver, pliers.
Frequently Asked Questions
What is the difference between AJU75152601, AJU73213301, and 5221EA1008F?
These are all part numbers for the same LG washer water inlet valve assembly used across different production runs. 5221EA1008F was the original part number, AJU73213301 was an updated version, and AJU75152601 is the current part number. All three are interchangeable. If your washer's documentation, parts diagram, or old valve label shows any of these numbers, this replacement is the correct current part to order.
My washer won't dispense fabric softener — is this the right part?
Yes — the fabric softener dispenser solenoid is one of the ports integrated into the AJU75152601 valve assembly. When the fabric softener dispenser fails to activate at the right point in the rinse cycle, it is almost always because the solenoid valve controlling that port has failed. Since it is part of the same multi-port valve assembly, replacing the AJU75152601 resolves fabric softener, bleach, and jet spray dispenser issues in the same repair. Individual ports cannot be replaced — the complete assembly must be replaced when any one port fails.
What are the AGM73269501 inlet screens included in the kit?
The AGM73269501 screens are small mesh filters that install inside the hot and cold water inlet ports of the valve. They trap mineral deposits and debris from the household water supply before they can reach the valve seats and solenoid mechanisms. The kit includes two screens — one for the hot inlet and one for the cold inlet. Installing these fresh screens with the new valve helps extend valve life, especially in areas with hard water. If the old valve failed due to mineral clogging rather than solenoid failure, cleaning the supply hoses before installation is also recommended.
How do I know if the water inlet valve has failed vs. the control board?
You can test the valve solenoids with a multimeter. Disconnect the harness from a solenoid coil and probe both terminals — a working solenoid coil shows a resistance reading (typically 200–500 ohms); an open circuit confirms the solenoid has failed. If all solenoid coils test good but the valve still does not operate, the control board may not be sending the correct 12V DC signal to the solenoids — this requires checking voltage at the solenoid connectors with the washer powered and in a fill cycle, which is a more advanced diagnostic step.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from ABS plastic and stainless steel to match the port configuration, solenoid specifications, and dimensions of the original AJU75152601 water inlet valve assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA61-14306A Refrigerator Drain Tube Clip
The XPARTCO DA61-14306A is an aftermarket replacement drain tube clip (also called a drain clip or defrost drain heater plate) compatible with select Samsung French door and side-by-side refrigerators. This clip solves one of the most common and frustrating Samsung refrigerator problems: water and ice collecting under the crisper or deli drawer. The clip attaches to the defrost heater in the evaporator compartment and extends a metal tab down into the defrost drain opening — conducting heat directly into the drain line during each defrost cycle. That heat keeps the drain from freezing shut, so meltwater can flow freely down to the drain pan instead of backing up and refreezing inside the refrigerator.
When the defrost drain freezes over, meltwater from the defrost cycle has nowhere to go. It backs up, spills over into the fresh food compartment, and forms a sheet of ice under the crisper drawers — the signature Samsung symptom. The DA61-14306A is the improved design that supersedes the earlier DA61-06796A, with a longer heat-transfer tab that reaches further into the drain line. Metal construction, heat-resistant, designed for the freezer environment. It directly replaces DA61-14306A, DA61-06796A, AP7020625, PS16622001, EAP16622001, and PD00076719. Important: the clip alone won't fix a drain that is already frozen or clogged — see the installation notes below. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO DA61-14306A Refrigerator Drain Tube Clip fixes Samsung French door and side-by-side refrigerators with water pooling or ice sheets forming under the crisper/deli drawer, a frozen defrost drain, or water leaking onto the floor. The clip extends the defrost heater's warmth into the drain line so it can't freeze shut. Improved design superseding DA61-06796A. Metal, heat-resistant. Replaces DA61-06796A, AP7020625, PS16622001, EAP16622001, PD00076719. Important: you must also thaw and clear the existing drain line — the clip prevents future freezing but won't clear an existing blockage.
Common Problems This Part Fixes
Water collecting under the crisper or deli drawer — the classic Samsung frozen-drain symptom
Sheet of ice forming under the crisper drawers or on the floor of the fresh food compartment
Water leaking out of the refrigerator onto the kitchen floor
Defrost drain frozen shut — meltwater can't reach the drain pan
Ice buildup in the evaporator drain trough
Repeated re-freezing of the drain line after manual thawing
Food at the back of the fresh food compartment freezing (a related airflow/defrost symptom)
Drain clip missing, broken, or the original DA61-06796A not reaching far enough into the drain
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain tube clip directly replaces the following OEM and cross-reference part numbers:
DA61-14306A, DA61-06796A, AP7020625, ASM30895, PD00076719, EAP16622001, PS16622001.
DA61-14306A is the improved design that supersedes DA61-06796A. If your refrigerator originally used the DA61-06796A, the DA61-14306A is a direct upgrade. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This drain tube clip is compatible with select Samsung refrigerators, including:
Samsung French door refrigerators — RF-series models experiencing defrost drain freezing (including RF266ABRS/XAA and related)
Samsung French door refrigerators — RFG-series models (including RFG298HDBP/XAA and related)
Samsung side-by-side refrigerators — select models with the same evaporator drain design
Samsung bottom-freezer refrigerators — select models
Note: This clip fits a broad range of Samsung refrigerators with the common evaporator drain design. Because it's an improved replacement for the DA61-06796A, it may fit models where the original clip is listed even if the DA61-14306A isn't shown in the parts diagram. Always verify your refrigerator's model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Drain tube clip (drain clip / defrost drain heater plate) — extends the defrost heater's warmth into the drain line to prevent it from freezing shut
Solves the notorious Samsung "water and ice under the crisper drawer" problem at its root cause
Improved design with a longer heat-transfer tab that reaches further into the drain than the original DA61-06796A
Keeps the defrost drain open so meltwater flows freely to the drain pan instead of backing up into the fresh food compartment
Durable, heat-resistant metal construction designed for the freezer environment
Direct supersession of DA61-06796A — a drop-in upgrade for models that originally used the older clip
Replaces AP7020625, PS16622001, EAP16622001, and PD00076719
Compatible with Samsung French door, side-by-side, and bottom-freezer refrigerators
Inexpensive fix for a problem that otherwise leads to repeated manual defrosting
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
XPDA61-14306A
Supersedes
DA61-06796A
Part Type
Refrigerator Drain Tube Clip (Defrost Drain Heater Plate)
Condition
Aftermarket Replacement
Application
French Door, Side-by-Side & Bottom-Freezer Refrigerators (Samsung)
Function
Conducts defrost heater warmth into the drain line to prevent freezing
Material
Heat-resistant metal
Location
Evaporator compartment — clips to defrost heater, extends into drain opening
Also Known As
Drain clip, defrost drain clip, drain heater plate
Often Paired With
Drain Tube (DA97-04049D, sold separately)
Compatible Brands
Samsung
Installation Notes
⚠️ Unplug Refrigerator First — CRITICAL: Thaw and Clear the Drain Line, or the Repair Won't Work Unplug the refrigerator and safely store any food that could spoil. Wear work gloves. This is the most important thing to understand about this repair: installing the clip alone will NOT fix a drain that is already frozen or clogged. The clip prevents the drain from freezing in the future — it does not clear an existing blockage. You must first thaw and clear the drain line completely, or water will continue to back up. Remove the shelves, drawers, and the rear evaporator access panel in the freezer to expose the evaporator coils, defrost heater, and drain trough. If there's ice buildup, let it thaw fully — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily. Thaw the drain line: hot water in a pump sprayer or garden sprayer works well to flush the drain passage from the evaporator down to the compressor compartment. Keep flushing until water flows freely all the way through to the drain pan. Also inspect the drain tube itself (Samsung DA97-04049D, sold separately) — lint and debris commonly build up inside it, and a clogged tube will re-block the drain no matter what clip you install. If the tube is dirty or restricted, replace it. Once the drain is confirmed clear and flowing, remove any old drain clip that's present. Install the new DA61-14306A by clipping it securely onto the defrost heater element and seating the heat-transfer tab down into the drain opening — good metal-to-metal contact with the heater is essential, since the clip works by conducting heat. Confirm the tab reaches into the drain passage. Reinstall the evaporator panel, shelves, and drawers, plug the refrigerator back in, and monitor over the next few defrost cycles to confirm water is reaching the drain pan and no ice is re-forming under the crisper. Tools needed: Phillips screwdriver, nut driver, pump sprayer or garden sprayer (for hot water), towels, work gloves.
Frequently Asked Questions
Why is water and ice collecting under my crisper drawer?
This is the classic symptom of a frozen defrost drain, and it's extremely common on Samsung refrigerators. Here's the chain of events: your refrigerator periodically runs a defrost cycle to melt frost off the evaporator coils. That meltwater is supposed to run down a drain trough, through a drain tube, and into a pan near the compressor where it evaporates. But if the drain opening freezes shut, the meltwater has nowhere to go — it backs up, overflows the trough, and runs forward into the fresh food compartment, where it pools and refreezes under the crisper drawers. Each defrost cycle adds more water, building a thicker sheet of ice. The DA61-14306A clip fixes the root cause by extending heat from the defrost heater into the drain, keeping it thawed so water can always escape.
Will installing this clip fix my problem by itself?
Not by itself — and this is critical to understand before you start. The clip prevents the drain from freezing going forward, but it does not clear a drain that's already blocked. If your drain line is currently frozen or clogged with debris, you must thaw and flush it clear first, or water will keep backing up regardless of the new clip. Use hot water in a pump sprayer to flush the drain passage from the evaporator down to the compressor compartment until water flows freely. Additionally, the drain tube running to the compressor compartment (Samsung DA97-04049D) often accumulates lint and debris — appliance technicians routinely recommend replacing it as part of this repair. Skipping these steps is the number one reason people install the clip and see no improvement.
What's the difference between DA61-14306A and DA61-06796A?
They serve the same function, but the DA61-14306A is the improved, later design. Its heat-transfer tab is longer and reaches further into the drain line, so it delivers heat more effectively deep into the passage where freezing typically starts. The DA61-06796A was the earlier version. If your refrigerator's parts diagram shows DA61-06796A, the DA61-14306A is a direct drop-in upgrade — many customers specifically seek out the newer clip for this reason. Both mount to the defrost heater the same way.
My model isn't listed as compatible — can I still use this?
Possibly. Because the DA61-14306A is an improved replacement for the widely-used DA61-06796A, it fits a broad range of Samsung refrigerators with the common evaporator drain design — sometimes including models where the parts lookup doesn't list it explicitly. Appliance technicians have confirmed it can be used on models beyond its official listing. That said, the effectiveness of the repair still depends entirely on the drain line being thoroughly cleared. If your model isn't listed and you're unsure, contact our support team with your model number and we'll help confirm fit.
Should I also replace the drain tube?
In most cases, yes — appliance technicians routinely recommend it. The drain tube (Samsung DA97-04049D, sold separately) runs from the evaporator section down to the compressor compartment, and over years of use it accumulates lint, dust, and debris that restrict flow. Even with a working drain clip keeping the upper drain thawed, a clogged tube downstream will still cause water to back up. Since you'll already have the refrigerator open for the clip installation, inspecting and replacing the tube at the same time is the efficient move — and it's a common reason the repair fails when people skip it.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured from heat-resistant metal to match the fit, heat-transfer function, defrost heater mounting, and drain-tab geometry of the original DA61-14306A drain tube clip used in compatible Samsung French door, side-by-side, and bottom-freezer refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Whirlpool OEM
Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute
Genuine OEM ice chute door for select Whirlpool, KitchenAid, JennAir, and Kenmore side-by-side refrigerators.
Product Overview
The Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute is a Genuine OEM dispenser component that opens to allow ice to pass through the chute and closes to help seal the dispenser opening when not in use.
A damaged, warped, or sticking chute door can allow ice to spill, prevent the dispenser from sealing correctly, or cause frost and moisture around the dispenser area.
Quick Answer
WP2305258 is the Genuine Whirlpool OEM ice dispenser chute door. It replaces original part number 2305258 and fits select Whirlpool-built side-by-side refrigerators.
Common Problems This Part May Fix
Ice falls out of the dispenser unexpectedly
Ice chute door will not close fully
Door is cracked, warped, or broken
Warm air enters through the dispenser opening
Frost or moisture forms around the chute
Dispenser flap does not seal after dispensing
Replaces and Cross-References
WP2305258, 1174891, 2305258, AP3854387, AWP885431, AH986856, EAP986856, OEM18021486, PD00004757, PS986856
Cross-reference numbers are supplied for identification. Verify the refrigerator model number before ordering.
Compatibility
Confirmed applications include select Whirlpool-built side-by-side refrigerators sold under Whirlpool, KitchenAid, JennAir, and Kenmore brands. Examples include:
GS6NBEXRY02
KSRS25RVMS05
KSRS25RVMK05
KSCS25FVSS03
KSRT25CRSS00
KSRS25RSMS01
KSCS25FTMK02
KSCS23FVMS01
KSRS25RVMK02
106.54782803
106.57794704
106.57792704
Important: This is only a partial fitment list. Verify the complete model number from the refrigerator data label before purchase.
Key Features
Genuine Whirlpool OEM replacement part
Ice dispenser chute door / flap
Helps direct ice into the dispensing chute
Closes after dispensing to help seal the opening
Direct-fit component for compatible models
Product Specifications
Manufacturer Part Number
WP2305258
Brand
Whirlpool
Part Type
Refrigerator Ice Dispenser Door Chute
OEM Status
Genuine OEM
Appliance Type
Refrigerator
Condition
New
Package Quantity
1 Ice Chute Door
Installation Notes
Disconnect refrigerator power before service.
Remove the dispenser trim or front housing according to the model-specific procedure.
Photograph the original chute-door position and linkage before removal.
Inspect the support bracket, spring, motor/actuator, and seal surfaces for damage.
Install the new chute door in the same orientation and confirm free movement.
Reassemble the dispenser and confirm the door opens during dispensing and closes completely afterward.
Diagnostic tip: If the chute door does not close after replacement, inspect the actuator motor, support bracket, spring, linkage, and dispenser control before replacing additional parts.
Frequently Asked Questions
Is WP2305258 a Genuine OEM part?
Yes. It is a Genuine Whirlpool OEM refrigerator dispenser ice chute door.
Does WP2305258 replace 2305258?
Yes. WP2305258 is the current replacement for original part number 2305258.
What does the ice chute door do?
It opens when ice is dispensed and closes afterward to help seal the dispenser opening.
Will this fit every Whirlpool refrigerator?
No. It fits specific dispenser designs. Confirm the complete refrigerator model number before ordering.
Shop With Confidence
Verify the refrigerator model before ordering. This listing is for the Genuine Whirlpool OEM WP2305258 ice chute door.
Genuine Whirlpool OEMIce Chute DoorCompatibility SupportFast U.S. Shipping
3405-001117 Genuine OEM Refrigerator Dispenser Control Switch - Compatible with Samsung
Product Description
Restore your refrigerator’s dispenser functionality with the 3405-001117 Genuine OEM Refrigerator Dispenser Control Switch. This Samsung-manufactured microswitch is designed for select Samsung refrigerators, controlling the activation of the water and ice dispenser mechanism. It ensures reliable dispensing, addressing issues like unresponsive or intermittent water/ice dispensing for a seamless user experience.
Note: Includes (1) dispenser control microswitch. Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: 3405-001117, DA34-00011A, 110634, 3727507, PD00033242, EAP11712663, AP5962465, PS11712663.
Compatibility:
Compatible with select Samsung refrigerator models, including but not limited to:
Samsung: RS2530BBP, RS2530BSH, RS2530BWP, RS2555BB, RS2555SL, RS2555SW, RS2577BB, RS2577SL, RS2577SW, RS2630SH, RS2630WW, RS265LABP, RS265LAWP, RS277ACBP, RS277ACPN, RS277ACWP
Common models: Samsung RS253BABB, RS253BAVQ, RS255BABB, RS255BASB, RS257BARB
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung refrigerators with water and ice dispensers.
🔧 Specifications: Genuine OEM Samsung microswitch, single-pole, double-throw (SPDT), 0.1A, 125/250V.
💪 Reliable Performance: Ensures precise activation of the water and ice dispenser mechanism.
🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves unresponsive or intermittent water/ice dispensing issues.
Product Specification
Part Number: 3405-001117
Component Type: Refrigerator dispenser control switch
Material: Durable plastic housing with metal contacts
Operating Conditions: 0.1A, 125/250V, suitable for refrigerator dispenser environments
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator’s dispenser working smoothly today!
Add to cart now for a reliable fix!
MSWF Refrigerator Water Filter
Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family. You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness.
Replaces Part Number: 1262070, AH1559689, EA1559689, MSWF3PK, WR02X12345, WR02X12801, WR02X13618, AP3997949, PS1559689.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WR17X11653 Refrigerator Dispenser Ice Door Flapper – Genuine OEM Part for GE and Hotpoint
Product Overview
The WR17X11653 Refrigerator Dispenser Ice Door Flapper is a Genuine OEM part that covers the ice chute in your refrigerator’s dispenser. It opens when dispensing ice and closes to prevent warm air and moisture from entering the freezer compartment. A broken or worn ice flapper can lead to frost buildup, melting ice, and energy inefficiency. Replacing it restores a proper seal and reliable dispenser performance.
Replaces Part Numbers
This part replaces WR17X11653, WR17X3093, WR17X3492, AH964304, EA964304, AP3672582, PS964304.
Compatible Brands
Compatible with GE, Hotpoint, and Kenmore refrigerators built by GE. Fits many side-by-side models with front-mounted ice and water dispensers.
Fixes the Following Issues
Frost or condensation in dispenser area
Ice chute not sealing properly
Warm air entering freezer compartment
Flapper missing, cracked, or stuck
Why Buy from Parts‑O‑Matic
Genuine OEM part for dependable performance
Fast and free shipping in the U.S.
Easy installation with no special tools
Trusted by DIYers and appliance repair pros
