ES16100 Dishwasher Door Switch
Replaces Part Numbers: WD21X10261, 1263984, AH1481922, AP3994765, EA1481922, 16100, ES16100, PS1481922, WD21X0557, WD21X557
Description: The Interlock Switch is a replacement part for specific GE, Hotpoint electric and gas dryer and dishwasher models. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.
This is an aftermarket part that can be used as a replacement for the OEM part.
AEC74337401 Dishwasher Water Inlet Guide - Compatible with LG Dishwashers
Product Description
Restore your dishwasher’s cleaning performance with the AEC74337401 Water Inlet Guide from Parts-O-Matic. This genuine OEM replacement guide directs water from the inlet valve into the dishwasher tub, ensuring proper water flow for wash and rinse cycles. Designed for LG dishwashers, it fixes issues like insufficient water, poor cleaning, or water inlet error codes.
Note: Includes one water inlet guide. Take photos of connections during disassembly and clean the inlet valve before installation.
Replaces part numbers: AEC74337401, AP6233501, PD00056036, PS12078211.
Compatibility:
Compatible with models including but not limited to:
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand Compatibility: Fits select LG dishwasher models.
💧 Specifications: OEM plastic water inlet guide, designed for secure water flow and durability.
💰 Cost-Effective: OEM performance at a competitive price.
🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 20–30 minutes.
🛡️ Reliable Fixes: Resolves insufficient water, poor cleaning, or water inlet error codes.
Installation Notes:
Safety First: Unplug the dishwasher and turn off the water supply before installation to avoid shock or leaks.
Clean the inlet valve and hose to prevent clogs.
Access the inlet guide (inside or near the bottom of the dishwasher), disconnect the old guide, and install the new one, ensuring tight connections.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a budget-friendly fix!
DC62-30314L Dishwasher Genuine OEM Water Valve
120V, 60Hz, single coil valve with GHT inlet.
Fits Specific Samsung Dishwashers Models.
Replaces Part Numbers: DC62-30314L, AP5582579, PS4209101.
Description: The Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This genuine OEM part ensures reliable water flow control, allowing your dishwasher to fill and drain effectively during each cycle. Designed specifically for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance.
10023852 Genuine OEM Bosch Dishwasher Water Valve
The 10023852 is a genuine Bosch OEM warm water inlet valve for Bosch, Thermador, Dacor, and Gaggenau dishwashers. This valve regulates the flow of warm water into the dishwasher during each wash cycle — a solenoid opens when the dishwasher calls for water and closes once the required amount has been reached, which is what prevents overfilling or underfilling and supports thorough cleaning performance.
Rated 110-127V, 60Hz. Common causes of a bad valve range from mineral buildup due to hard water, which can obstruct the valve, to general mechanical wear and electrical problems that impair the valve's ability to open or close correctly. Symptoms of a failing valve include inadequate water filling the dishwasher, overfilling that can lead to leaks and water damage, unusual noises coming from the valve area, or the dishwasher failing to start. It directly replaces 00628334, 3278459, 33199023, 628334, 9000655808, ABS12394, AP5691117, AP7193108, EAP8729241, PD00075605, PS8729241.
Quick Answer
The 10023852 Genuine OEM Bosch Dishwasher Water Valve fixes Bosch, Thermador, Dacor, and Gaggenau dishwashers with inadequate water filling, overfilling, unusual noise near the valve, or a dishwasher that won't start. 110-127V, 60Hz. Replaces 00628334, 3278459, 33199023, 628334, 9000655808, ABS12394, AP5691117, AP7193108, EAP8729241, PD00075605, PS8729241. If you're also seeing a slow leak near the sump area, be aware that on some Bosch models the sump gasket is built into the sump itself rather than sold as a separate part — a leak there is a different repair from this valve.
Common Problems This Part Fixes
Inadequate water filling the dishwasher
Overfilling, which can lead to leaks and water damage
Unusual noises coming from the valve area
Dishwasher failing to start
Poor washing results due to insufficient water supply
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher water inlet valve directly replaces the following OEM and cross-reference part numbers:
10023852, 00628334, 3278459, 33199023, 628334, 9000655808, ABS12394, AP5691117, AP7193108, EAP8729241, PD00075605, PS8729241.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select Bosch dishwashers, and also fits select Thermador, Dacor, and Gaggenau dishwashers built on the Bosch platform, including model numbers such as SHXM98W75N/01, SHX863WD5N/01, SHEM63W55N/01, and SHPM65Z55N/01, and spanning model series SHE, DWH, SHX, SHV, and SHP.
Note: This valve is not universal — it's designed for specific Bosch, Thermador, Dacor, and Gaggenau models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Bosch OEM part — factory-specified solenoid design and flow rate
Regulates warm water flow into the dishwasher during each wash cycle
Resolves "won't fill properly," "overfilling," "unusual noise," and "won't start" symptoms caused by valve failure
Direct drop-in replacement — matches the original mounting and connections
Replaces 00628334, 3278459, 33199023, 628334, 9000655808, ABS12394, AP5691117, AP7193108, EAP8729241, PD00075605, PS8729241
Compatible with Bosch, Thermador, Dacor, and Gaggenau dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
10023852
Part Type
Dishwasher Warm Water Inlet Valve
Condition
Genuine OEM
Brand
Bosch
Voltage
110-127V
Frequency
60 Hz
Function
Regulates warm water flow into the dishwasher during fill
Repair Difficulty
Easy to Moderate
Quantity
1 valve
Compatible Brands
Bosch, Thermador, Dacor, Gaggenau
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. On many Bosch models, pulling the dishwasher out from under the counter gives the best access to the valve and surrounding sump area. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and water line from the old valve, remove its mounting hardware, and pull it free. Install the new 10023852 in the same position, reconnect the water line and electrical connector fully, and secure the mounting hardware. If you're troubleshooting a slow leak in this general area rather than a fill problem, be aware that on some Bosch models the sump gasket is built directly into the sump itself and isn't sold as a separate part — a leak there is a different repair involving the sump assembly (diverter, circulation pump, drain pump, and aqua-sensor) rather than this valve. Restore the water supply and power, then run a test cycle to confirm the dishwasher fills correctly with no leaks. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
My dishwasher isn't filling with enough water. Is this the right part?
Yes, this is one of the most direct symptoms of a failed water inlet valve. Since this valve is what admits warm water from your household supply into the dishwasher, mineral buildup, mechanical wear, or an electrical fault can prevent it from opening fully, leaving the dishwasher without enough water for a proper wash.
I have a slow leak near the bottom of my dishwasher. Is that this valve too?
Not necessarily. One customer traced a slow, worsening leak on a Bosch dishwasher to the sump gasket, not the water valve — and found that on their model, the gasket is built into the sump itself rather than being a separately replaceable part, requiring a more involved repair pulling the sump apart to address it. If your leak is coming specifically from the sump area rather than showing up as a fill problem, it may be a different repair than this valve replacement.
What causes this valve to fail over time?
The most common cause is mineral buildup from hard water, which can gradually obstruct the valve's internal passages. Mechanical wear and general electrical problems can also affect the valve's ability to open and close correctly over years of use.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Bosch to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water inlet valve originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
00622058 Dishwasher Genuine OEM Water Valve
Fits Specific Bosch Dishwasher Models
Description: This dishwasher Water Inlet Valve is a Genuine OEM part for specific Bosch dishwasher models. This component is responsible for controlling the flow of water into the dishwasher. It operates via electrical signals from the dishwasher's control board, opening to allow water to enter during the fill cycle and closing to prevent water from entering during other cycles.
✅ Key Features:
Genuine OEM Part for Bosch #00622058
120V, 60Hz single solenoid valve
Includes mounting bracket and hose connection port
Durable thermoplastic construction
🔁 Replaces Part Numbers:
00622058, 1999956, 622058, AH3491417, AP4927070, EA3491417, PS3491417, PS8728724.
🔧 Fixes These Common Symptoms:
Dishwasher not filling with water
Low or slow water flow
Water inlet error codes
Humming or clicking without water intake
Leaking around the valve area
🧰 Compatible With:
✔️ Bosch✔️ Thermador✔️ Gaggenau✔️ Siemens(Check your model number or contact us for assistance.)
✅ Affordable aftermarket solution
✅ Always Fast and Free U.S. shipping
✅ Backed by helpful support and easy returns
✅ Trusted by DIYers and appliance techs
🛒 Restore your dishwasher’s performance — order the 00622058 water inlet valve today from Parts-O-Matic.com, and get it delivered fast and free.
WPW10455261 Dishwasher Genuine OEM Pump and Motor Assembly
Fits specific Whirlpool, Maytag, Kenmore Dishwasher models
Description: This Dishwasher Pump & Motor is an OEM replacement part for specific Whirlpool dishwasher models. As the main component for water circulation, it contains both the water pump and motor required to power it.
Replaces Part Numbers: WPW10455261, W10455261, 2312159, W10500284, AP6021679, PS11755005.
California Residents only
WARNING: California’s Proposition 65
ERP 5304506516 Dishwasher Upper Spray Arm
Dishwasher Upper Spray Arm
Replaces Part Numbers: 5304506516, 154754502, 154478201, 154478202, 154607802, 154698901, 154698902, AP6036336, PS11770483.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 5304519906 Dishwasher Pump and Motor Assembly
Product Overview
The XPARTCO 5304519906 Dishwasher Pump and Motor Assembly is designed to circulate water through the spray arms and ensure proper cleaning performance. This Motor & Pump Assembly is a replacement part for specific Frigidaire dishwasher models. This assembly is crucial for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring that dishes are cleaned effectively. You should replace this motor and pump assembly if it becomes faulty. Common causes of a bad motor and pump assembly include electrical issues, wear and tear from regular use, or blockages caused by debris or food particles.
Quick Answer
If your dishwasher is not cleaning dishes, has weak spray pressure, makes unusual noises, or fails to circulate water, the 5304519906 pump and motor assembly may be faulty. Replacing it restores proper wash performance and water circulation.
Replaces Part Numbers
Replaces OEM part number: 5304519906, 154843901, EAP12712308, AFR18422, PD00053471, AP6840161, P154792801.
Compatibility
This pump and motor assembly is compatible with select Frigidaire, Electrolux, Kenmore, and other compatible dishwashers.
Frigidaire Dishwashers
Electrolux Dishwashers
Kenmore Dishwashers
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Dishes not getting clean
Weak or no water spray
Dishwasher making loud or grinding noise
Water not circulating during wash cycle
Key Features
Integrated pump and motor assembly
Restores strong water circulation
High-quality aftermarket replacement
Reliable and durable construction
Product Specifications
Part Number: XP5304519906
Part Type: Dishwasher Pump and Motor Assembly
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Dishwasher Water Circulation
Troubleshooting Guide
Dishes remain dirty → Weak or failed pump motor
No spray action → Pump not circulating water
Loud noise during wash → Motor or impeller issue
When Should You Replace This Assembly?
Replace this assembly if your dishwasher is not cleaning properly, lacks water pressure, or makes abnormal noises during operation.
Installation Notes
⚠️ Disconnect power and water supply before installation. Access the pump and motor assembly from the bottom of the unit and install securely according to your dishwasher model.
Related Parts
Dishwasher Spray Arm
Water Inlet Valve
Drain Pump
Frequently Asked Questions
Will this assembly fit my dishwasher?This part fits many Frigidaire and compatible dishwashers. Always verify your model number.
What does a pump and motor assembly do?It circulates water through the dishwasher to clean dishes effectively.
What are signs of a bad pump motor?Poor cleaning, weak spray, or loud noises during operation.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
WP661566 Dishwasher Genuine High Limit Thermostat
Replaces Part Number: WP661566, 661566, W10339474, 2887, 3369777, 3370783, 3371618, 4171694, WP661566VP, AP6010246, PS11743423.
Description: The High Limit Thermostat is a Genuine OEM part for specific Kenmore, Whirlpool dishwasher models. This safety feature is designed to prevent the dishwasher from overheating by shutting off the power if the internal temperature exceeds a certain limit. It acts as a safeguard against potential hazards, such as fires, and ensures the dishwasher operates within safe temperature ranges.
