Search results for "washer sensor"

W11700916 Washer Genuine OEM Door Latch The W11700916 is a genuine Whirlpool OEM lid lock assembly for Whirlpool top-load washers, and also fits select Maytag and Kenmore models. This assembly ensures the washer's lid remains securely locked during the wash and spin cycle, preventing access to the moving parts inside while the drum is in motion and confirming to the control board that the lid is safely closed before the cycle can proceed. This part is a superseding design, replacing the earlier W11394572 lid latch. Over time, the internal locking mechanism can wear out or fail electrically. A failing lid lock typically shows up as the lid not locking properly during a cycle, or the washer failing to start at all, since the control board won't proceed without confirmation the lid is securely closed. It directly replaces W11543566, W11394572, W11032875, AP7219279, and PS17217010. Quick Answer The W11700916 Washer Genuine OEM Door Latch fixes Whirlpool, Maytag, and Kenmore top-load washers where the lid isn't locking properly, or the washer won't start at all. Replaces W11543566, W11394572, W11032875, AP7219279, PS17217010. This is a newer superseding lid lock design — if your washer's original latch is one of the numbers it replaces, this is the correct current part to order. Common Problems This Part Fixes Lid isn't locking properly during the wash or spin cycle Washer won't start at all Lid pops open or unlocks unexpectedly mid-cycle Cycle stalls at the start and won't proceed to wash or spin Washer pumps or agitates but won't spin because the lid isn't sensed as locked Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer door latch directly replaces the following OEM and cross-reference part numbers: W11700916, W11394572, W11032875, W11543566, EG-380900, AP7219279, AWP46729, EAP17217010, OEM21657846, PD00085319, PS17217010 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This lid lock assembly is compatible with select Whirlpool top-load washers, and also fits select Maytag and Kenmore washers built on the Whirlpool platform, including model numbers such as: MVW8230HC0, MVW7230HW0, MVW7230HC0, MVW7232HC0, MVW7232HW0 MVW6200KW0, MVW6230RHW0, MVW6230HC1, MVW6230HW1, MVW6230HC0, MVW6230HW0 WTW8120HC0, WTW8120HW0 WTW7120HC0, WTW7120HW0 WTW6120HC1, WTW6120HW1, WTW6120HW0, WTW6120HC0 WTW5100HC0, WTW5100HW0, WTW5105HW0, WTW5105HC0 Note: This is a distinct lid lock design from other Whirlpool washer latches already in our catalog, such as our W10404050 and W10810403 listings — Whirlpool has used multiple different lid lock designs across its top-load washer lineup over the years. Always verify your full model number before ordering, or match the exact part number printed on your old latch. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified locking mechanism Confirms lid closure to the control board and locks the lid during wash/spin Resolves "lid won't lock," "washer won't start," and "lid pops open mid-cycle" symptoms Superseding design — current replacement for the earlier W11394572 latch Direct drop-in replacement — matches the original mounting and harness connector Replaces W11543566, W11394572, W11032875, AP7219279, and PS17217010 Compatible with Whirlpool, Maytag, and Kenmore top-load washers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number W11700916 Part Type Washer Lid Lock Assembly / Door Latch Condition Genuine OEM Brand Whirlpool Application Top-Load Washers Function Locks the lid during wash/spin and confirms closure to the control board Supersedes W11394572 Repair Difficulty Easy to Moderate — basic hand tools, novice repair experience Quantity 1 lid lock assembly Compatible Brands Whirlpool, Maytag, Kenmore Installation Notes ⚠️ Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Open the washer lid and locate the lid lock assembly mounted on its underside, typically secured with a couple of screws. Photograph the wiring harness connection before disconnecting anything. Remove the mounting screws, disconnect the wiring harness connector from the old assembly, and pull it free. Install the new W11700916 in the same position, reconnect the wiring harness connector fully, and secure the mounting screws. Restore power and run a test cycle to confirm the lid locks securely, the washer starts and completes a full cycle, and the lid unlocks normally once finished. Tools needed: multi-screwdriver, work gloves. Frequently Asked Questions My washer's lid isn't locking properly. Is this the part I need? Yes, this is the classic symptom this assembly addresses. Since the control board won't proceed into the wash or spin cycle without confirmation the lid is closed and locked, a worn or failing lock assembly can prevent the washer from starting or cause it to stop mid-cycle if the lock fails while running. My old part number is W11394572. Is this the same thing? This W11700916 is the current superseding part for W11394572 — Whirlpool has updated the part number, and this is the correct part to order now even if your washer's original latch was labeled with the older number. Is this the same latch as other Whirlpool washer lid locks you sell? Not necessarily — Whirlpool has used several different lid lock designs across its top-load washer lineup over the years, including other designs found elsewhere in our catalog. Always match your exact original part number, or your full washer model number, rather than assuming any "Whirlpool lid lock" will fit your machine. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original locking mechanism and wiring harness configuration of the lid lock assembly designed for your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

DA32-10105RCM Refrigerator Temperature Sensor  Replaces Part Numbers: DA32-10105R, DA32-00006W, DA32-00006U, 2030342, DA32-00006B, DA32-00006C, DA32-00006D, DA32-00006L, DA32-00006M, DA32-00006T, DA32-00006V, AP4135567, PS4138681. 1" probe, 25.75" lead with two pin connectors. Fits Specific Samsung Refrigerator Models. This Defrost Sensor is a replacement part designed specific Samsung refrigerator models. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

Genuine Whirlpool OEM Whirlpool WP3946430 Washer Genuine OEM Timer Control Factory-original quick-connect mechanical timer for select Whirlpool automatic washers. Product Overview WP3946430 is a Genuine Whirlpool OEM washer timer control. The timer controls the washer's electrical components and determines the duration and progression of the wash, rinse, drain, and spin portions of the selected cycle. This is a quick-connect style timer designed for specific Whirlpool-built washer models. Match the complete washer model number and original timer part number before ordering. Quick Answer Yes — WP3946430 is a Genuine Whirlpool OEM washer timer. It replaces original timer numbers 3946430, 3351811, and 3347766. Common Problems This Part May Fix Washer will not advance through the cycle Washer stops before completing a cycle Selected cycle does not start or progresses incorrectly Washer skips agitation, drain, rinse, or spin portions of a cycle Timer contacts are worn, burned, or mechanically damaged Timer failures can resemble lid-switch, motor, wiring, pump, or transmission problems. Diagnose the washer before replacing the timer. Replaces and Cross-References WP3946430, 3946430, 1126, 3347766, 3351811, J27-641, AP6008848, EAP11741989, PS11741989, AWP47890, PS11741989. All cross-references are shown in one box for identification. Always verify by complete appliance model number. Compatibility Fits select Whirlpool automatic washers. Verified model examples include: LA5500XSF1 LA5500XSG1 LA5500XSM1 LA5500XSN0 LA5500XSW0 LA5500XTG0 LA5580XTW0 LA6300XTM1 LA5668XTW0 LA8580XWG0 LA5580XSF2 LA5578XTN1 Important: This is a partial compatibility list. Whirlpool produced many similar washer timers with different internal contact sequences. Verify the complete washer model number and original timer number before purchase. Key Features Genuine Whirlpool OEM replacement part Quick-connect washer timer Controls cycle progression and timing Controls electrical functions according to the selected cycle Direct replacement for 3946430, 3351811, and 3347766 Product Specifications Manufacturer Part Number WP3946430 Manufacturer Whirlpool Part Type Washer Timer / Timer Control Connection Style Quick Connect Condition New Quality Genuine OEM Application Select Whirlpool Automatic Washers Installation Notes Unplug the washer before service. Remove the control-panel access hardware according to the washer service procedure. Document the original timer wiring/connector positions before disconnecting the old timer. Transfer the timer knob or dial components if required by the model. Install the replacement timer and reconnect all plugs securely. Reassemble the console and test the washer through a complete cycle. Safety: Disconnect electrical power before installation. If you are not comfortable servicing line-voltage washer controls, use a qualified appliance technician. FAQ Is WP3946430 a Genuine Whirlpool part? Yes. WP3946430 is a Genuine Whirlpool OEM washer timer. What does this washer timer control? It controls electrical components and the duration/progression of the washer's selected cycle. Does WP3946430 replace 3946430? Yes. It also replaces 3351811 and 3347766. Can I choose a timer only by appearance? No. Similar-looking timers can have different contact sequences. Always verify the complete washer model number and part number. Shop With Confidence Factory-original Whirlpool replacement part for supported washer models. Verify your complete appliance model number before ordering. Genuine Whirlpool OEMQuick-Connect TimerModel Verification Recommended

Read more less

W11399437 Genuine OEM Washer Drain Pump Replaces Part Numbers: AP6974144, PS12731241 Description: This Drain Pump is a Genuine OEM part for select Maytag, Kenmore, Whirlpool washer models. It is responsible for circulating water through the washing machine during all cycles. The pump draws water from the tub and dispenses it through the water supply hoses to soak, scrub, and rinse clothes.  

Read more less

5221ER1003M Genuine OEM Washer Water Valve - Compatible with LG, Kenmore Product Description Restore your washer’s performance with the 5221ER1003M Genuine OEM Washer Water Valve. This LG-manufactured cold water inlet valve assembly is designed as a replacement for select LG and Kenmore washing machines. It controls the flow of cold water into the washer during wash and rinse cycles, ensuring proper filling and efficient operation. This part addresses issues like leaking water, failure to fill, or overflow, often caused by a faulty or clogged valve. Note: Includes (1) cold water inlet valve assembly with three solenoids (hose and clamps not included). Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: 5221ER1003M, 4869495, PD00050119, EAP12579227, AP6334246, PS12579227. Compatibility: Compatible with select washer models, including but not limited to: LG: WM2016CW, WM2077CW, WM2101HW, WM2277HW, WM2301HR, WM2301HW, WM2455HG, WM2487HWM, WM2601HW, WM2701HV, WM2801HRA Kenmore: 796.40272900, 796.40441900, 796.41022900, 796.41028900, 796.41472210 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG and Kenmore washing machines. 🔧 Specifications: Genuine OEM LG cold water inlet valve with three solenoids, 110-120V, 60Hz. 💪 Reliable Performance: Controls cold water flow for wash, pre-wash, and bleach dispenser functions. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves leaking, failure to fill, or overflow issues. Product Specification Part Number: 5221ER1003M Component Type: Washer cold water inlet valve assembly Material: Plastic and metal Electrical Specs: 3 Way, DC 12V, three solenoids, standard hose fitting inlet, three water outlets. Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

WH02X10363 Genuine OEM GE Washer Hub Nut The WH02X10363 is a genuine GE OEM hub nut for GE, Hotpoint, and select RCA and Kenmore top-load washers. This nut is what secures the wash basket to the transmission's drive spline, holding the entire tub assembly firmly attached to the drive system. Every time the washer agitates or spins, this single nut is what keeps the basket properly seated and aligned rather than shifting or working loose under that repeated mechanical load. Over years of use, or from overloading the washer with oversized loads, this nut can loosen or wear enough that the basket no longer sits securely. A failed or loose hub nut typically shows up as a basket that wobbles or feels loose, unusual noise during agitation or spin, or in more advanced cases, a basket that isn't properly engaging with the drive system at all. It directly replaces AP5793681, 3029784, and PS8757009. Quick Answer The WH02X10363 Genuine OEM GE Washer Hub Nut fixes GE, Hotpoint, RCA, and Kenmore top-load washers with a wobbling or loose-feeling basket, unusual noise during agitation or spin, or a basket that isn't securely engaging with the drive system. Replaces AP5793681, 3029784, PS8757009. This nut requires a very specific torque — GE's own guidance calls for a 90 ft-lb torque-limiting extension and a 1-5/16" (33mm) impact socket. Using a standard impact wrench without the torque limiter can damage both the new nut and the transmission. Common Problems This Part Fixes Wash basket that wobbles or feels loose Unusual noise during agitation or spin Basket that isn't properly engaging with the drive system Missing or broken hub nut Basket instability that worsens with larger or unbalanced loads Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer hub nut directly replaces the following OEM and cross-reference part numbers: WH02X10363, 3029784, AGE1396433, AP5793681, EAP8757009, PD00046649, PS8757009. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This hub nut is compatible with select GE top-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, Café, and Kenmore washers built on the GE platform, including model numbers such as GHWN8350D0WS and GTW465ASN2WW. Note: Always verify your full model number before ordering, since GE uses different hub nut sizes and thread designs across its washer lineup. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified thread and torque rating Secures the wash basket to the transmission drive spline Resolves "wobbling basket," "loose feel," and "unusual noise during agitation or spin" symptoms 1-5/16" (33mm) nut size Direct drop-in replacement — matches the original thread and fit Replaces AP5793681, 3029784, and PS8757009 Compatible with GE, Hotpoint, RCA, Haier, Monogram, Café, and Kenmore top-load washers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WH02X10363 Part Type Washer Hub Nut Condition Genuine OEM Brand GE Application Top-Load Washers Size 1-5/16" (33mm) Function Secures the wash basket to the transmission drive spline Required Torque 90 ft-lb (torque-limiting extension required) Thread Direction Reverse-threaded — tightens counter-clockwise Repair Difficulty Moderate to Hard — specialized tools required Quantity 1 hub nut Compatible Brands GE, Hotpoint, RCA, Haier, Monogram, Café, Kenmore Installation Notes ⚠️ Critical — Correct Torque Tool Required, And This Nut Threads Counter-Clockwise Unplug the washer before beginning. Wear work gloves and safety glasses. Remove the fabric softener dispenser to access the agitator/auger assembly. Use a screwdriver to puncture through the inner shaft of the auger, then twist clockwise until the auger releases — this step can be difficult, and you'll need to hold the basket steady to keep it from rotating while you work. Lift the auger out. Remove the 11mm bolt underneath, then lift out the base assembly to expose the hub nut. Per GE's own guidance, removing and installing this nut requires a 90 ft-lb torque-limiting extension (GE part WX05X10028) along with a 1-5/16" (33mm) impact socket (GE part WX05X10022). Using a standard impact wrench without the torque limiter risks over-torquing, which can damage both the new nut and the washer's transmission. Unthread the old 33mm hub nut — this can also be difficult, so be patient and keep the basket from rotating. To install the new WH02X10363, thread it on going counter-clockwise, since this nut is reverse-threaded — the opposite direction of a standard nut. Align the base with the spline shaft, set it into position, and reassemble in reverse order: reinstall the 11mm bolt, reinstall the auger, and reattach the fabric softener dispenser. Restore power and run a test cycle to confirm the basket is stable with no wobble or unusual noise. Tools needed: impact driver or wrench with 90 ft-lb torque-limiting extension, 1-5/16" (33mm) deep well or impact socket, 3/8" to 1/2" adapter, 11mm socket, Phillips screwdriver, work gloves, safety glasses. Frequently Asked Questions Do I really need a special torque tool, or can I use a regular impact wrench? GE's own manufacturer guidance is explicit on this point: a 90 ft-lb torque-limiting extension must be used when removing or installing this hub nut to prevent damage to the nut and the transmission from over-torquing. A standard impact wrench alone can apply far more force than this nut and the transmission are designed to handle, so skipping the torque limiter risks turning a simple nut replacement into a much larger and more expensive transmission repair. Which direction does this nut turn to tighten? This nut is reverse-threaded, meaning it tightens by turning counter-clockwise — the opposite of a standard nut. This is an easy detail to miss if you're not expecting it, and turning it the wrong direction won't seat it correctly. Keep this in mind both when removing the old nut and installing the new one. My basket feels wobbly. Is this definitely the hub nut? It's a strong possibility, especially if the wobble has developed gradually or worsened after washing unusually large or unbalanced loads. Since this nut is what holds the entire basket assembly firmly attached to the transmission's drive spline, a loosened or worn nut directly translates into a basket that no longer sits securely. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original thread design, size, and torque rating of the hub nut originally installed in your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

DC62-00311F Washer Genuine OEM Water Valve – Compatible with Samsung & Kenmore Washers Product Description Restore proper water flow and dependable washer operation with the DC62-00311F Washer Genuine OEM Water Valve. This factory-approved inlet valve precisely controls water entering the washer during fill cycles. A defective valve may cause no-fill issues, slow filling, water leaks, or error codes. Installing this Genuine OEM water valve ensures exact fit, correct water pressure, and long-lasting performance as designed by the manufacturer. Replaces Part Numbers DC62-00311F, PD00043649, EAP11719654, AP5966624, 3992244, PS11719654. Compatibility This Genuine OEM washer water inlet valve fits select Samsung and Kenmore (Samsung-manufactured) washers. Example compatible models include (but are not limited to):Samsung WF203ANS, WF206ANS, WF209ANSKenmore 592.49003, 592.49005 Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and performance 💧 Accurate Water Control – Ensures proper fill levels during wash cycles 🔧 Durable Solenoid Construction – Designed for reliable long-term use 🛠️ Direct-Fit Installation – No modifications required 🛡️ Fixes Common Issues – Resolves no-fill, slow fill, leaking, or error codes 📐 Product Specification Part Number: DC62-00311F Component Type: Washer Water Inlet Valve Voltage: 120V AC Water Connections: Hot & Cold Material: OEM-grade reinforced plastic with metal solenoids Mounting: Rear cabinet direct-fit Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, towel or shallow pan ⚠️ Safety First: Unplug the washer and shut off the water supply before servicing. Steps: Disconnect power and turn off water supply. Remove the rear access panel. Disconnect inlet hoses and wiring harness from the old valve. Remove mounting screws and take out the old valve. Install the new DC62-00311F water valve and secure it. Reconnect hoses and wiring, restore water and power, and test for leaks. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore proper washer filling with confidence — Add to Cart Now for a factory-quality repair!

Read more less

XPARTCO DC96-01703H Washer Water Pressure Switch - Compatible with Samsung Washers Product Description Ensure your Samsung washer operates flawlessly with the replacement DC96-01703H Washer Water Pressure Switch. This replacement part is designed for select Samsung washing machines, providing precise water level control to prevent overfilling, underfilling, or water leakage. It resolves issues like error codes, inconsistent water levels, or failure to start wash cycles, delivering reliable performance for your appliance. Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit. Replaces part numbers: DC96-01703H, PD00030634, EAP8764044, AP5799898, 3997570, PS8764044. Compatibility: Compatible with models including but not limited to: Samsung: WA48J7700AW/A2, WA48H7400AW/A2, WA50F9A7DSP/A2, WA52M7750AV/A4, WA56H9000AP/A2 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Samsung washing machines. 🔥 Specifications: Water pressure switch with electrical connectors and 28" hose attachment. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 10–15 minutes. 🛡️ Effective Fixes: Resolves water level issues, error codes, and improper filling. Product Specification Part Number: XPDC96-01703H Component Type: Washer water pressure switch Mounting: Secures to washer control panel with screws or clips Operating Conditions: Suitable for washer environments Installation Notes: Safety First: Disconnect the washer from power and water sources before installation. Follow the owner’s manual for guidance. Shop for high-quality replacement appliance parts with a 30-day return policy. Fix your washer today! Add to cart now for a reliable solution!

Read more less

XPARTCO W10820036 Washer / Dryer Door Switch The XPARTCO W10820036 is an aftermarket replacement door switch used on select Whirlpool-built combination washer/dryer units. This switch is a safety interlock: it detects whether the door is fully closed and latched, and it signals the control board that it is safe to run the motor, heater, and water valves. On a combo unit, this single interlock typically governs both the wash and dry portions of the cycle, since both functions share the same drum and door. If the switch fails to detect a closed door — or fails electrically even when the door is closed properly — the control will refuse to start the cycle, or will stop mid-cycle if the switch drops out while running. Typical failure modes for a part like this include a cracked or worn switch lever that no longer depresses fully when the door closes, internal contacts that have pitted or burned out from years of cycling, and a housing that has come loose from its mounting bracket so the plunger no longer lines up with the door strike. A functioning door switch should click firmly when the door closes and should show continuity across its terminals only when the lever is pressed. Quick Answer The XPARTCO W10820036 Washer/Dryer Door Switch is a door safety interlock switch for select Whirlpool-built combination washer/dryer units. It fixes units that won't start with the door closed, stop mid-cycle, or fail to register the door as closed even when it's latched properly. Note: this listing was built from general parts knowledge because current supplier and cross-reference data was not available at build time — see the note below before publishing. Common Problems This Part Fixes Washer/dryer combo won't start even though the door is fully closed Cycle stops partway through, as if the door had been opened Door doesn't feel like it's "clicking" or latching the way it used to Console shows a door-related error or won't advance past the door-closed step Intermittent operation — sometimes starts, sometimes doesn't, depending on how the door is closed Visibly cracked, loose, or broken switch housing or lever Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door switch directly replaces the following OEM part number: W10820036, 279347, 2-2770, 2-50062, 2-5415, 2020, 202770, 233480, 235462, 237194, 238775, 238980, 239868, 24198, 247207, 26000279347, 279290, 287219, 287220, 291679, 291697, 292212, 296141, 296144, 3347287, 338883, 3392266, 3397503, 3399991, 347207, 350526, 359230, 359484, 364090, 364091, 367034, 388322, 389105, 4273196, 4319330, 660308, 687429, 75958, 8224, 83333, 84144, 86628, 89556, 99788, 99838, LP210, AP5985146, AWP41434, EAP334185, PD00023982, PS11723153. No additional cross-reference numbers have been confirmed for this part yet. If you have a superseded or alternate number for your appliance, contact our support team and we will verify compatibility before you order. Compatibility This door switch is intended for select Whirlpool-built washer/dryer combination units, where a single door and drum serve both the wash and dry functions. Model list not yet confirmed: A specific compatible model list for W10820036 was not available at the time this page was built. Please verify your exact model number before ordering. Contact our support team with your model number and we will confirm fitment before you purchase. Key Features Aftermarket replacement door safety switch for Whirlpool-built washer/dryer combo units Detects whether the door is closed and latched before allowing the wash or dry cycle to run Resolves "won't start with door closed," "stops mid-cycle," and "door not detected" symptoms Direct drop-in replacement for the original W10820036 switch — no modification required Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPW10820036 OEM Part Number W10820036 Part Type Washer/Dryer Combo Door Safety Switch Condition Aftermarket Replacement Application Whirlpool-Built Washer/Dryer Combination Units Function Door-closed safety interlock for wash and dry cycles Quantity 1 switch Compatible Brand Whirlpool (combo platform) Installation Notes ⚠️ Unplug The Unit Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access to the door switch on combo units is typically through the front or top control panel — photograph the wiring harness before disconnecting it so you can match it exactly on reassembly. Confirm the new switch's lever aligns with the door strike before securing the mounting screws, and test for a firm, positive click when the door closes before restoring power and running a cycle. If your unit's service manual is available, follow its specific access and mounting steps rather than relying solely on general guidance. Frequently Asked Questions My combo unit won't start. Is this definitely the door switch? It's one of the most common causes when a unit refuses to start with the door visibly closed. Before replacing the switch, confirm the door is latching fully and that nothing (a stray sock, a bent strike bracket) is preventing it from closing all the way. If the door latches firmly but the unit still won't start, or a multimeter shows no continuity across the switch terminals when the lever is pressed, the switch itself is the likely culprit. Does this switch control both the washer and dryer functions? On combination washer/dryer units, yes — a single door and drum typically serve both functions, so one door switch acts as the safety interlock for both the wash and dry portions of the cycle. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the mounting, switching function, and door-interlock behavior of the original W10820036 switch used in compatible combination washer/dryer units. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WPW10409079 Washer Genuine OEM Drain Pump Replaces Part Number: WPW10409079, W10409079, 2118648, AP6021043, PS11754363, LP09079. Description: This Drain Pump is a replacement part for specific Whirlpool top-loading washing machine models. Located near the bottom center of the machine, it actively pumps water out of the washer tub at the end of each cycle.  The pump motor spins an impeller chamber to push water through the drain hose and out of the home. Causes of failure include clogging from mineral buildup or fabric fibers within the pumping components. Over time, motor windings experience excess heat and may burn out from consistent drainage cycles. WPW10409079 is the part number for a Whirlpool washer drain pump that removes water from the washer during the drain cycle. It is compatible with many Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models.

Read more less

WH23X29553 Genuine OEM GE Washer Water Valve The WH23X29553 is a genuine GE OEM water inlet valve for GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café models. This valve controls the flow of water into the washer from the household supply line — when the control calls for a fill, the valve's solenoid opens to admit water, and closes again once the correct level is reached. Built with an ABS plastic body and stainless steel components for durability against corrosion. Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use. A failing valve typically shows up as the washer not filling properly, filling too slowly, or leaking water. It directly replaces WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643. Quick Answer The WH23X29553 Genuine OEM GE Washer Water Valve fixes GE front-load washers (and select Hotpoint, RCA, Haier, Monogram, and Café models) that aren't filling properly, are filling too slowly, or are leaking water near the valve connections. Replaces WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643. Not the same part as the similarly-numbered WH23X29538 valve — confirm you have the correct number before ordering. Common Problems This Part Fixes Washer not filling with water, or filling only partially Washer fills much more slowly than it used to Water leaking near the valve connections Cycle stalling at the fill step and never advancing to wash No hot water reaching the tub, or no cold water reaching the tub Washer not washing properly due to insufficient or incorrect-temperature water Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer water inlet valve directly replaces the following OEM and cross-reference part numbers: WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water valve is compatible with select GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café washers built on the GE platform., including model numbers such as: GFW650SPN0SN, GFW650SPN1SN, GFW650SPN2SN, GFW650SPN3SN, GFW650SPN4SN GFW650SSN0WW, GFW650SSN1WW, GFW650SSN2WW, GFW650SSN3WW, GFW650SSN4WW GFW850SPN0DG, GFW850SPN0RS, GFW850SPN1DG, GFW850SPN1RS, GFW850SPN2DG, GFW850SPN2RS, GFW850SPN3DG, GFW850SPN3RS, GFW850SPN4RS, GFW850SPN5RS GFW850SSN0WW, GFW850SSN1WW, GFW850SSN2WW, GFW850SSN3WW GFW655SSV0WW PFW870SPV0RS PFW950SPT0DS, PFW950SPT1DS, PFW950SPT2DS Note — not the same as WH23X29538: A similarly-numbered valve, WH23X29538, is a separate part (replaces 4977241, AP6990115, PS16217225, EAP16217225, 33090201, 0024000126GB) used on related but distinct models. The two are easy to confuse given how close the numbers are — always confirm you have the exact part number from your appliance or parts diagram before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified solenoid design and flow rate ABS plastic body with stainless steel components for corrosion resistance Resolves "won't fill," "fills slowly," and "leaking near the valve" symptoms caused by valve failure Direct drop-in replacement — matches the original mounting and hose connections Replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA Compatible with GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WH23X29553 Part Type Washer Water Inlet Valve Condition Genuine OEM Brand GE Application Front-Load Washers Body Material ABS plastic Component Material Stainless steel Quantity 1 valve Compatible Brands GE, Hotpoint, RCA, Haier, Monogram, Café Installation Notes ⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Release The Control Panel Carefully Disconnect power at the outlet or shut off the circuit breaker, and shut off both hot and cold water supply valves before beginning. Wear work gloves. Access to this valve is typically behind the front control panel on many models. When removing the front control panel, avoid pulling it straight out too far — slotted tabs on the right side of the panel can break if forced. Instead, pull the panel gently forward, then slide it to the right to release it cleanly. With the panel released, locate the valve and disconnect the hot and cold water supply hoses, keeping a towel handy for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the outlet hoses from the old valve, remove its mounting screws, and pull it free. Install the new WH23X29553 in the same position, reconnect all outlet hoses to their original positions, reconnect the electrical connector, and secure the mounting screws. Reattach the hot and cold supply hoses, tightening securely. Reinstall the control panel and any surrounding trim, restore the water supply, and check every connection for leaks before restoring power. Run a full test cycle across a few different temperature settings to confirm each fill function works correctly. Tools needed: Phillips screwdriver, pliers, towel, work gloves. Frequently Asked Questions How do I remove the front control panel without breaking it? Avoid pulling the panel straight out with heavy force — the slotted tabs on the right side of the panel can snap if you pull too far. Instead, pull the panel gently forward first, then slide it to the right to release it from its mounting. This gentler approach avoids the most common way this panel gets damaged during a valve repair. I've heard this valve sometimes needs replacing again after just a couple of years. Is that normal? Some owners have reported needing to replace this valve again within a relatively short time, even after a successful repair. While most installations hold up well long-term, if you experience a repeat failure, it's worth double-checking your household water pressure and mineral content, since hard water and high pressure can accelerate wear on any water valve regardless of brand. Is this the same as WH23X29538? The numbers look almost identical. No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close match, since ordering the wrong one means it won't fit correctly. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water valve originally installed in your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WH03X36897 Washer Genuine OEM Mode Shifter Actuator – Compatible with GE & Hotpoint Washers Product Description Restore proper wash and spin operation with the WH03X36897 Washer Genuine OEM Mode Shifter Actuator. This factory-approved component shifts the washer between agitation and spin modes during the wash cycle. A failing mode shifter can cause the washer to agitate but not spin, spin improperly, make clicking noises, or display cycle errors. Replacing it with this Genuine OEM actuator ensures precise shifting, reliable performance, and correct cycle operation. Replaces Part Numbers WH03X36897, WH18X27186, AP7225424, PD00087767, EAP17626543, PS17626543 Compatibility This Genuine OEM mode shifter actuator fits select GE and Hotpoint top-load washers. Example compatible models include (but are not limited to):GE GTW335ASN1WW, GTW465ASN2WW, GTW485ASJ1WSHotpoint HTW240ASK6WS Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and dependable operation 🔄 Accurate Mode Shifting – Properly switches between wash and spin cycles 🔇 Quiet, Smooth Operation – Reduces clicking or erratic shifting noises 💪 OEM-Grade Durability – Designed for long service life under repeated cycles 🛡️ Fixes Common Issues – Solves no-spin, improper agitation, or cycle errors 📐 Product Specification Part Number: WH03X36897 Component Type: Washer Mode Shifter Actuator Voltage: 120V AC Mounting: Direct-fit installation on transmission assembly Function: Controls agitation-to-spin shifting Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock. Steps: Disconnect power and tilt the washer back for bottom access. Locate the mode shifter actuator near the transmission. Disconnect the wiring harness and remove mounting screws. Install the new WH03X36897 actuator and secure it in place. Reconnect wiring, return washer upright, and restore power. Run a test cycle to confirm proper shifting. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore correct washer cycle operation — Add to Cart Now for a factory-quality repair!

Read more less