Search results for "Flame Sensor"

XPARTCO 62-23543-01 Gas Furnace Flame Sensor – Compatible with Rheem, Ruud, and WeatherKing Furnaces Product Description Restore safe and reliable furnace operation with the XPARTCO 62-23543-01 Gas Furnace Flame Sensor. This high-quality aftermarket replacement detects the presence of a burner flame and signals the control board to keep the gas valve open. A dirty or failed flame sensor can cause short cycling, ignition failure, or a furnace that won’t stay lit. Replacing it with this durable XPARTCO sensor ensures proper flame detection and dependable heating performance. Specification : The furnace flame sensor is designed to detect the flame.  1/4”male quick connect, Angle - sensor offset: 90 degree. Replaces Part Numbers 62-23543-01,62-23543-02, 62-23543-03, 62-23543-04 Compatibility This replacement flame sensor fits select Rheem, Ruud, and WeatherKing gas furnaces. Example compatible models include (but are not limited to):Rheem RGRJ series, Ruud UGDG series, WeatherKing RGRA series. Always verify your furnace’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM flame-sensing performance 🔥 Accurate Flame Detection – Ensures gas valve remains open only when flame is present 💰 Cost-Effective Repair – Reliable alternative to expensive OEM sensors 🛠️ Simple Installation – Direct-fit design with single mounting screw 🛡️ Fixes Common Issues – Solves furnace short cycling, ignition failure, or burner shutdown 📐 Product Specification Part Number: 62-23543-01 Component Type: Gas Furnace Flame Sensor Material: Stainless steel sensor rod with ceramic insulator Mounting: Single-screw bracket mount Electrical Connection: Spade terminal Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, fine abrasive pad (optional for cleaning) ⚠️ Safety First: Turn off power and gas supply to the furnace before servicing. Steps: Shut off furnace power and gas supply. Locate the flame sensor near the burner assembly. Disconnect the wire and remove the mounting screw. Install the new XPARTCO 62-23543-01 flame sensor. Reconnect the wire, restore power and gas, and test furnace operation. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance & HVAC Parts Supplier 🔄 30-Day Return Policy Restore safe furnace ignition and heating — Add to Cart Now for a reliable, budget-friendly replacement!

Read more less

XPARTCO 0130F00010 Gas Furnace Flame Sensor Fits the Specific Goodman Gas Furnace models Replaces Part Numbers:TJFLS013, AP6326767, 0130F00010   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 17438200000160 Gas Dryer Flame Switch The XPARTCO 17438200000160 is an aftermarket replacement gas dryer flame switch compatible with select Midea, Insignia gas dryers, including the MLG45N1BWW, MLG45N3BMG, MLG45N3BWW, MLG52S7AWW, CDG41N1AW/CDG45N1AW series, NSDRE67WH8A, NSFDRG67WH8A, NSDRE67WH8AC, NSTDRG75W1. The flame switch is a safety component mounted on the burner assembly that confirms a flame is actually present after the gas valve opens and the igniter lights the burner. If the switch does not detect a flame within the expected window, it signals the control board to shut off the gas valve, preventing unburned gas from continuing to flow into the dryer cabinet. When the flame switch fails, the dryer may not heat at all, may shut off the burner shortly after ignition (short-cycling the flame), may trip a no-heat fault code on models with digital displays, or — in rarer failure modes — may fail to shut off gas flow appropriately, which is a safety-relevant failure. It directly replaces 17438200000160 (Midea OEM). Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 17438200000160 Gas Dryer Flame Switch fixes Midea gas dryers that won't heat, where the burner lights and then shuts off shortly after ignition, or where a no-heat fault is displayed. Mounted on the burner assembly — confirms flame presence after ignition and signals the control board to keep the gas valve open. Genuine Midea OEM part number. Compatible with Midea MLG45N1BWW, MLG45N3BMG, MLG45N3BWW, MLG52S7AWW, CDG41N1AW, and CDG45N1AW gas dryers. Common Problems This Part Fixes Gas dryer not heating — flame switch not confirming flame presence to the control board Burner lights briefly and then shuts off — flame switch failing to maintain the "flame confirmed" signal No-heat fault code displayed on models with digital control panels Dryer runs and tumbles normally but produces no heat Burner repeatedly cycling on and off rapidly during a heat cycle Visible damage, corrosion, or carbon buildup on the flame switch near the burner Replaces Part Numbers This flame switch directly replaces the following part number: 17438200000160, AP7153000, PS18188577. This is the Midea, Insignia manufacturer part number used across multiple Midea gas dryer models. Contact our support team with your model number if you need confirmation before ordering. Compatibility This flame switch is compatible with select Midea, Insignia gas dryers, including: Midea MLG45N1BWW gas dryer Midea MLG45N3BMG gas dryer Midea MLG45N3BWW gas dryer Midea MLG52S7AWW gas dryer (8.0 cu. ft. front load) Midea CDG41N1AW gas dryer (Criterion, air vent) Midea CDG45N1AW gas dryer (Criterion, air vent) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Confirms flame presence at the burner after ignition and signals the control board accordingly Safety component — helps ensure the gas valve closes promptly if a flame is not detected Mounts directly to the burner assembly in the same position as the original switch Genuine Midea manufacturer part number — designed as a direct fit for compatible models Compatible with Midea MLG45N1BWW, MLG45N3BMG, MLG45N3BWW, MLG52S7AWW, CDG41N1AW, and CDG45N1AW gas dryers Installs in 30–45 minutes with basic hand tools Product Specifications Part Number XP17438200000160 Part Type Gas Dryer Flame Switch Condition Aftermarket Replacement Application Gas Dryers (Midea platform) Location Mounted on the burner assembly Compatible Brands Midea Installation Notes ⚠️ Gas Appliance Safety Warning This part is installed in a gas dryer. Always unplug the dryer and shut off the gas supply at the shutoff valve before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. Do not restore power or gas until the repair is fully complete and all connections are confirmed secure. If you are not comfortable working on gas appliances or safety-relevant flame-detection components, have this part installed by a qualified technician. ⚠️ Wear Work Gloves — Access Requires Cabinet Disassembly Disconnect power and shut off gas before beginning. Wear work gloves throughout — there are sharp metal edges inside the dryer cabinet. Remove the lint filter and the screws securing the lint filter housing. Release the top panel locking clips with a putty knife and lift the top panel. Disconnect the door switch harness and remove the front panel to access the drum and burner assembly. Locate the flame switch mounted on the burner assembly — it is positioned to detect the flame produced once the igniter lights the gas. Photograph the wire connections before disconnecting. Disconnect the wires from the old flame switch, remove the mounting screw, and pull the switch free. Install the new 17438200000160 flame switch in the same position, secure the mounting screw, and reconnect the wires. Reassemble the front panel, drum, and top panel in reverse order. Restore gas and power, and run a test heat cycle to confirm the burner ignites and stays lit normally. Tools needed: Phillips screwdriver, putty knife, work gloves. Frequently Asked Questions What does the flame switch do, and how is it different from an igniter? The igniter is the component that heats up and ignites the gas at the burner. The flame switch is a separate safety component that confirms a flame is actually present after the igniter has done its job and the gas valve has opened. If the flame switch does not detect the expected flame condition, it signals the control system to close the gas valve, stopping gas flow. This two-part system — ignition plus flame confirmation — is a standard safety design in gas dryers and gas appliances generally, ensuring gas does not continue flowing if combustion isn't actually occurring. My burner lights and then shuts off after a few seconds — is this the flame switch? Yes, this is a common symptom of a failing flame switch. If the switch is not reliably maintaining its "flame detected" signal to the control board even though the burner is genuinely lit, the system may interpret this as a flame failure and shut the gas valve as a safety precaution — causing the burner to repeatedly light and then extinguish. This short-cycling pattern during what should be a continuous heat cycle is a strong indicator that the flame switch needs replacement. Why is this called a "flame switch" rather than a "flame sensor"? Different manufacturers use different terminology for similar flame-detection safety components. On Whirlpool-family gas dryers, this type of part is typically called a "flame sensor" — a bimetal-style sensor near the igniter that closes a circuit when it senses sufficient heat. Midea's parts catalog labels this specific component the "flame switch," and it serves an analogous safety role within the Midea gas burner system: confirming the presence of a flame after ignition. The terminology differs by manufacturer, but the safety function is similar in concept. Why does this repair require opening the whole dryer cabinet? On Midea gas dryers, the flame switch is mounted directly on the burner assembly inside the dryer cabinet, which is only accessible after removing the lint filter housing, releasing the top panel, and removing the front panel. This is a more involved repair than swapping an externally accessible part, but it follows the same general gas dryer disassembly procedure used for replacing igniters, thermal fuses, and other burner-area components. Since the cabinet must be opened, it can be a good opportunity to inspect other burner components (igniter, gas valve coils) for wear at the same time. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is manufactured to match the dimensions, mounting configuration, and function of the original 17438200000160 Midea flame switch. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 5304509706 Gas Oven Igniter Product Overview The XPARTCO 5304509706 Gas Oven Igniter is designed to ignite the gas burner and ensure consistent oven heating performance. This Oven Igniter is a replacement part for select Frigidaire, Kenmore, GE gas oven models, designed to ignite the gas in the oven burner to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating. Quick Answer If your gas oven is not heating, takes too long to preheat, or the burner does not ignite, the 5304509706 igniter may be weak or faulty. Replacing this igniter restores proper ignition and consistent oven performance. Replaces Part Numbers Replaces OEM part number: 5304509706, 316489402, 316489408, 316119301, 4545981, 012505482182, EAP12071409, AFR18015, PD00035904, AP6230715, PS12071409, WB2X10016, WB02X10016, 1704, EAP241804, AGE826644, PD00042950, AH241804, EA241804, AP2009619, PS241804. Compatibility This gas oven igniter is compatible with select Frigidaire, Electrolux, Kenmore, and other compatible gas ranges and ovens. Frigidaire Gas Ranges Electrolux Ovens GE Gas Ranges Kenmore Gas Ovens Always verify your appliance model number before ordering. Common Problems This Part Fixes Oven not heating Slow or delayed ignition Burner not lighting Gas smell due to ignition failure Key Features Designed for gas oven ignition Provides fast and reliable burner ignition High-quality aftermarket replacement Durable construction for long-lasting performance Product Specifications Part Number: XP5304509706 Part Type: Gas Oven Igniter Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Application: Gas Ovens & Ranges Troubleshooting Guide Oven not igniting → Faulty igniter Long preheat time → Weak igniter No flame despite gas flow → Igniter failure When Should You Replace This Igniter? Replace this igniter if your oven fails to heat, takes too long to preheat, or does not ignite the gas burner properly. Installation Notes ⚠️ Disconnect power and shut off gas before installation. Remove mounting screws, disconnect wiring, and install the new igniter carefully. Avoid touching the igniter surface with bare hands. Related Parts Gas Oven Safety Valve Oven Temperature Sensor Control Board Frequently Asked Questions Will this igniter fit my oven?This igniter fits many Frigidaire and compatible gas ovens. Always verify your model number. What does an oven igniter do?It ignites the gas burner and allows the oven to heat properly. What are signs of a bad igniter?Oven not heating, delayed ignition, or no flame during operation. Is this OEM or aftermarket?This is a high-quality aftermarket replacement part. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less

318258203 Genuine OEM Frigidaire Range Radiant Bridge Surface Burner Element The 318258203 is a Genuine OEM Frigidaire replacement radiant bridge surface burner element compatible with select Frigidaire, Electrolux, and Kenmore electric ranges and cooktops. This is a dual surface bridge element — it spans two separate burner zones and bridges them together to create one large, elongated heating surface ideal for griddles, fish pans, and oversized cookware. Rated at 1800W / 2600W, it uses an exposed resistance wire (haliant-style) to generate heat directly on the glass-ceramic cooktop surface. As a Genuine OEM part manufactured by Frigidaire to factory specifications, the 318258203 is a direct factory-exact replacement. It also replaces the earlier 7318258203 part number. The element uses exposed resistance wire to heat the cooking surface — note that minor surface cracks in the glass covering do not affect heating performance. Before installation, photograph the original element's wire terminal connections so you can reconnect the new element correctly. Always unplug the range before beginning. Installs in 20–30 minutes with basic hand tools. Quick Answer The 318258203 Genuine OEM Frigidaire Radiant Bridge Surface Burner Element fixes electric ranges where the bridge burner zone is not heating, heats unevenly, or the element has visibly burned out. Dual bridge element rated 1800W/2600W. Haliant-style exposed resistance wire. Replaces 7318258203. Compatible with Frigidaire, Electrolux, and Kenmore electric ranges. Genuine OEM — factory-exact fit and performance. Common Problems This Part Fixes Bridge burner zone not heating at all when activated Bridge element heating only on one side — uneven heating across the element Visible burn marks, breaks, or open spots on the resistance wire Bridge burner zone glowing on one side but not the other Element cycles on and off erratically instead of maintaining steady heat Cooktop surface shows discoloration or hot spots directly above the element area Replaces Part Numbers This burner element directly replaces the following OEM and cross-reference part numbers: 318258203, 1197704, 7318258203, AH1529079, AFR16668, AP3965799, EA1529079, PD00057059, PS1529079. Contact our support team with your model number if you need confirmation before ordering. Compatibility This bridge surface element is compatible with select electric ranges and cooktops from the following brands: Frigidaire electric ranges and cooktops Electrolux electric ranges and cooktops Kenmore / Sears electric ranges (Frigidaire/Electrolux-built models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Genuine OEM part manufactured by Frigidaire to factory specifications — guaranteed fit and performance Dual bridge element — spans two burner zones to create one large elongated cooking surface for griddles and oversized cookware Rated 1800W / 2600W — dual-power design for large-surface cooking flexibility Haliant-style exposed resistance wire heating — heats the glass-ceramic surface directly and efficiently Replaces 7318258203 and cross-references AH1529079, AFR16668, AP3965799, EA1529079, PD00057059, PS1529079. Compatible with Frigidaire, Electrolux, and Kenmore electric ranges Note: photograph terminal wiring before removal to ensure correct reconnection Product Specifications Part Number 318258203 Also Replaces 7318258203 Part Type Radiant Bridge Surface Burner Element (Dual / Haliant-style) Condition Genuine OEM Application Electric Ranges and Cooktops (glass-ceramic surface) Wattage 1800W / 2600W (dual power) Element Type Haliant — exposed resistance wire on element surface Element Style Bridge (spans two burner zones) Compatible Brands Frigidaire, Electrolux, Kenmore Installation Notes ⚠️ Unplug Range Before Starting Unplug the range or turn off the circuit breaker before beginning. Allow the cooktop to cool completely before touching the element. Photograph the existing element's terminal wiring connections before disconnecting anything — the terminal block connections must be replicated exactly on the new element. Lift the glass-ceramic cooktop surface by opening the front and removing the retaining screws (typically under the front trim), then prop the top open. Unplug the element's terminal connections from the terminal block. Remove the element bracket screws and lift the old element out. Position the new 318258203 element in the same location, secure the mounting bracket, and reconnect the terminal wires in the same positions as documented in your photo. Lower the cooktop, restore power, and test both bridge element power settings. Note: do not touch the haliant wire surface of the element during installation. Tools needed: Phillips screwdriver, 1/4" nut driver. Frequently Asked Questions What is a bridge burner element and what is it used for? A bridge burner element connects two adjacent burner zones on a glass-ceramic electric cooktop into one elongated heating surface. When activated, the bridge element heats the entire combined area — ideal for using a griddle, roasting pan, fish pan, or any large flat-bottomed cookware that spans more than one standard burner. When the bridge is not in use, each adjacent zone functions as its own independent standard burner. The bridge element activates when the bridge control is selected on the range's control panel. What is a haliant element and how is it different from a standard radiant element? A haliant (also called halogent or exposed coil radiant) element uses resistance wire that is partially exposed on the surface of the element body, rather than sheathed inside a smooth glass tube. Both types heat the glass-ceramic surface above them, but haliant elements tend to heat up faster and can reach higher surface temperatures than sheathed radiant elements. Minor surface cracks in the element's glass material do not affect heating performance — the resistance wire is what generates heat, and it functions independently of the outer covering. How do I test if the bridge element has failed? The most reliable test is a continuity check with a multimeter. Unplug the range, lift the cooktop, and disconnect the element's terminal wires. Probe the element's terminal connections with a multimeter set to resistance mode. A working element will show a resistance reading (typically between 10–100 ohms for the heating coil). An open circuit (no continuity / infinite resistance) confirms the element has burned out. You can also visually inspect the haliant wire for visible breaks, dark spots, or melted areas — any visible break in the wire confirms failure. Why is it important to photograph the terminal wiring before removing the old element? Bridge elements have multiple terminal connections for the dual power settings (1800W and 2600W). The wires must be connected to the correct terminals on the new element to ensure both power levels work correctly. If the wires are connected in the wrong order, the element may not heat at all, heat only on one setting, or may not be protected by the correct thermal limiter. Always take a clear photo of the old element's terminal connections before disconnecting anything, and use that photo as a reference when connecting the new element. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Frigidaire to factory specifications. It is the exact same bridge surface element installed in compatible Frigidaire and Electrolux ranges from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP 316011200 Range Top Burner Spark Igniter Electrode The 316011200 is an aftermarket replacement gas range surface burner spark igniter electrode compatible with select Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, and Danby gas ranges and cooktops. The spark igniter electrode is the ceramic-and-metal tip mounted next to each surface burner that generates the electrical spark needed to ignite the gas when a burner knob is turned. When the electrode cracks, corrodes, or its internal wiring degrades, it will produce a weak or absent spark — causing the burner to not light, to require a long hold of the ignition button, or to click repeatedly without igniting. Made from porcelain and metal, each electrode measures 3/4"L x 1/2"W x 1-3/8"H and is sold individually. One electrode is used per surface burner — most gas ranges have 4 or 6 surface burners, each with its own electrode. It directly replaces AP2123862, 5303311262, 464, AH436633, EA436633, EAP436633, PS436633, LP11343, and PD00000522. Installs in 15–30 minutes depending on model disassembly required. Note: While this part is involved in a gas appliance, the electrode itself is not a gas component — it carries only a low-voltage electrical signal from the ignition module. Always unplug the range and shut off the gas before beginning any repair. Quick Answer The 316011200 Range Top Burner Spark Igniter Electrode fixes Frigidaire-platform gas ranges where a surface burner won't light, requires a long hold to ignite, sparks continuously without lighting, or produces a weak clicking sound. Porcelain/metal, 3/4"L x 1/2"W x 1-3/8"H. Sold individually — one per burner. Compatible with Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, and Danby gas ranges. Replaces AP2123862, 5303311262, 464, EA436633, PS436633, LP11343. Common Problems This Part Fixes Surface burner will not light — electrode not producing a spark Burner requires holding the ignition knob for an extended time before the gas lights Burner sparks repeatedly (rapid clicking) without ever lighting the gas One burner does not spark while all others work normally — that burner's electrode has failed Weak or intermittent spark at a specific burner Electrode visibly cracked, chipped, or tip broken off Corrosion or moisture damage to the electrode tip or wiring from a cooking spill Replaces Part Numbers This spark igniter electrode directly replaces the following OEM and cross-reference part numbers: 316011200, 5303311262, AFR16248, AH436633, AP2123862, EA436633, EAP436633, LP11343, PD00000522, PS436633. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This spark igniter electrode is compatible with select gas ranges and cooktops from the following brands: Frigidaire gas ranges and cooktops Tappan gas ranges and cooktops Electrolux gas ranges (select models) Gibson gas ranges Kelvinator gas ranges White-Westinghouse gas ranges Kenmore / Sears gas ranges (Frigidaire/Electrolux-built models) Danby gas ranges (select models) Note: This electrode is sold individually — one electrode per burner. Most gas ranges have 4 or 6 surface burners, each with its own electrode. If multiple burners are not lighting, you may need to order multiple electrodes. Always verify your model number before ordering to confirm this electrode fits the specific burner assembly on your range. Key Features Generates the electrical spark that ignites the gas at each surface burner when the ignition knob is turned Porcelain insulator body with metal electrode tip — designed to withstand continuous thermal cycling near the burner flame Dimensions: 3/4"L x 1/2"W x 1-3/8"H — matches original electrode dimensions for compatible Frigidaire-platform models Sold individually — one electrode per surface burner; order one per failed burner Replaces AP2123862, 5303311262, 464, EA436633, PS436633, LP11343, and EAP436633 Compatible with Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, and Danby gas ranges Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 15–30 minutes with basic hand tools Product Specifications Part Number 316011200 Part Type Gas Range Surface Burner Spark Igniter Electrode Condition Aftermarket Replacement Application Gas Ranges and Cooktops Material Porcelain / Metal Color White / Gray Dimensions 3/4"L x 1/2"W x 1-3/8"H Sold As Single electrode (one per burner) Compatible Brands Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, Danby Installation Notes ⚠️ Gas Appliance Safety — Unplug and Shut Off Gas Before Starting This part is installed on a gas range. Always unplug the range from the power outlet and shut off the gas supply at the shutoff valve before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. Do not restore gas or power until the repair is complete and you have confirmed there are no gas connections disturbed during the repair. ⚠️ Range Top Access May Require Lifting the Cooktop On most Frigidaire-platform gas ranges, the spark igniter electrodes are mounted beneath the cooktop surface and accessed by lifting the top panel — this requires removing all grates and burner caps, then lifting the top from the front. The electrode is secured by a single screw and connected to the ignition module by an insulated wire. Disconnect the wire, unscrew the mounting screw, and remove the old electrode. Install the new 316011200 electrode in the same position, tighten the mounting screw, and reconnect the wire. Important: inspect the insulated wire carefully for damage — if the wire is cracked or bare in any section, it may arc to the stove body and should be repaired with heat-resistant tape or replaced before installing the new electrode. Restore gas and power and test the burner. Tools needed: Phillips screwdriver, possibly a nut driver for some models. Frequently Asked Questions What does the spark igniter electrode do? The spark igniter electrode is the small ceramic-and-metal tip mounted next to each surface burner on a gas range. When you turn a burner knob to the "light" or "ignite" position, the ignition module sends a high-voltage electrical pulse through the wire to the electrode tip. This creates a visible electrical spark that jumps between the electrode tip and the metal burner cap, igniting the gas. The electrode itself carries only a brief electrical pulse — it does not directly handle gas — but it must be in good condition with an intact porcelain body and clean metal tip to produce a reliable, consistent spark. One burner won't light but all the others work — is it the electrode? Almost certainly yes. When all other burners spark normally but one does not, the fault is almost always isolated to that burner's electrode or its connecting wire — not the ignition module (which powers all burners) or the gas supply (which feeds all burners). Inspect the electrode on the non-lighting burner: look for cracks, chips, or a broken tip on the porcelain body. Also check the connecting wire for corrosion at the connection point or damage to the insulation. Replacing the 316011200 electrode on that burner will restore normal ignition in most cases. My burner clicks continuously even when not trying to ignite — what causes this? Continuous clicking when no burner is being lit is typically caused by moisture or food residue on the electrode tip or in the burner cap area creating an unintended electrical path — the ignition module detects a spark condition and keeps firing. Clean the electrode tip, burner cap, and burner head thoroughly with a dry cloth or soft toothbrush, and allow them to dry completely. If cleaning stops the clicking, a cracked or degraded electrode that is allowing moisture to reach the internal wiring is the likely underlying cause — replace the electrode to prevent recurrence. If the clicking persists after the burner area is completely clean and dry, the ignition module may be faulty. How many electrodes does my gas range need? Each surface burner on a gas range has its own dedicated spark igniter electrode — one electrode per burner. A standard 4-burner gas range uses 4 electrodes; a 5- or 6-burner range uses 5 or 6. This listing is for a single electrode. If multiple burners are not lighting, order one electrode for each affected burner. When replacing one electrode, it is a good opportunity to inspect all other electrodes for cracks or corrosion and replace any that show visible wear at the same time. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM part, but is manufactured from porcelain and metal to match the dimensions and performance of the original 316011200 surface burner spark igniter electrode. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WB13K10003 Surface Burner Spark Electrode The XPARTCO WB13K10003 is an aftermarket replacement spark electrode for the surface burners on GE, Hotpoint, and Kenmore gas ranges. The electrode is the small ceramic-tipped component mounted at the burner head that actually creates the spark: when you turn the burner knob, the range's spark module sends a rapid series of high-voltage electrical pulses to the electrode, which arcs across a small gap to the metal burner cap. That spark ignites the gas flowing from the burner, and the clicking sound you hear while the knob is turned is literally the sound of that spark firing over and over until the burner catches. Because the electrode's ceramic insulator is what keeps that high-voltage pulse contained to a precise spark path, even small damage matters: a hairline crack in the ceramic can let voltage leak to ground instead of arcing at the tip, carbon and grease buildup on the tip can insulate it just enough to weaken the spark, and the metal tip itself can corrode or erode after years of sparking. A failing electrode typically shows up as a burner that clicks normally but is slow to catch, catches with a small "whoof" as gas builds up before ignition, or doesn't spark at all while the other burners on the same range work fine. It directly replaces AP2020574, 244911, AH231266, EA231266, and PS231266. GE's internal part number for this electrode is WG02F05048. Quick Answer The XPARTCO WB13K10003 Surface Burner Spark Electrode fixes GE, Hotpoint, and Kenmore gas ranges where a specific burner clicks but won't light, sparks weakly or intermittently, or ignites with a delayed "whoof" instead of catching right away. Ceramic-tipped spark electrode for the surface burner. Replaces AP2020574, 244911, AH231266, EA231266, PS231266. If a burner doesn't click at all, the problem is more likely the spark module or igniter switch — not this electrode. Common Problems This Part Fixes A specific surface burner clicks but won't ignite, while other burners work fine Burner sparks weakly, intermittently, or only from certain knob positions Delayed ignition — a noticeable pause with gas smell before the burner catches with a "whoof" Clicking sound that continues well after the burner has already lit Visible carbon buildup, grease, or discoloration on the electrode tip Cracked, chipped, or damaged ceramic insulator visible at the base of the electrode Electrode tip that looks corroded, pitted, or eroded compared to a new one No spark at all from one specific burner position Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This surface burner spark electrode directly replaces the following OEM and cross-reference part numbers: WB13K10003, WG02F05048, AP2020574, 244911, AH231266, AGE261531, PD00035924, EA231266, PS231266 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This spark electrode is compatible with select gas surface burners on ranges from the following brands: GE gas ranges — EGR2000, EGR3000, and EGR3001 series GE gas ranges — J2B900 and JGB910 series GE gas ranges — JGBP27 series Hotpoint gas ranges (select GE-built models) Kenmore gas ranges (select GE-built models) Westinghouse, Monogram, Café, Moffat, and Profile gas ranges (select GE-built models) Verified model numbers include: EGR2000EC0BB, EGR2000EC0CC, EGR2000EC0WW, EGR2000EC1BB, EGR2000EC1CC, EGR2000EC1WW, EGR3000ED0BB, EGR3000ED0CC, EGR3000ED0WW, EGR3000ED1BB, EGR3000ED2BB, EGR3000ED3BB, EGR3000EH1BB, EGR3001ED1SS, EGR3001ED2SS, EGR3001ED3SS, EGR3001EF1SS, EGR3001EH1SS, J2B900BEF1BB, J2B900CEF1CC, J2B900SEF1SS, J2B900SEF2SS, J2B900WEF1WW, JGB910BEC1BB through JGB910BEC4BB, JGB910CEC1CC through JGB910CEC4CC, JGB910SEC1SS through JGB910SEC3SS, JGB910WEC1WW through JGB910WEC4WW, and the JGBP27BEA1AD through JGBP27BEA5AD range. Note: GE uses several visually similar spark electrodes across its gas range lineup that differ in overall length and mounting angle — for example, a related electrode sold under WB13K10014 is used on other burner positions and model platforms. Some customers have reported this electrode arriving slightly longer than the original but still fitting with room to spare; if your range has very tight clearance underneath, verify your exact model number and burner position before ordering. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement ceramic-tipped spark electrode for gas surface burner ignition Directs high-voltage pulses from the spark module into a precise spark path at the burner cap Resolves "clicks but won't light," "weak or intermittent spark," and "delayed ignition" symptoms caused by a worn or damaged electrode Ceramic insulator construction resists heat and contains the spark path Direct drop-in replacement — mounts to the same burner head bracket and wire connector Replaces AP2020574, 244911, AH231266, EA231266, and PS231266 Compatible with GE, Hotpoint, Kenmore, Westinghouse, Monogram, Café, Moffat, and Profile gas ranges Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number WB13K10003 OEM Part Number WB13K10003 (WG02F05048) Part Type Gas Range Surface Burner Spark Electrode Condition Aftermarket Replacement Application Gas Range Surface Burner Ignition Tip Material Ceramic-insulated electrode tip Function Directs spark module pulses to ignite burner gas Mounting Burner head bracket with wire lead connector Quantity 1 electrode Compatible Brands GE, Hotpoint, Kenmore, Westinghouse, Monogram, Café, Moffat, Profile Installation Notes ⚠️ Danger — Gas Appliance Turn off the gas supply to the range at the shutoff valve and unplug the range (or shut off its circuit breaker) before beginning any work near the burners or gas line. After reassembly, check every disturbed connection for leaks using a soapy water solution — bubbling indicates a leak. If you ever smell gas at any point during this repair, do not attempt to light the range or operate any switches; leave the area immediately and contact your gas utility or a qualified technician. ⚠️ Handle The Ceramic Insulator Carefully Wear work gloves. Remove the burner grate and burner cap from the affected position to access the electrode underneath. Photograph the electrode's mounting position and wire connection before removing anything. Most electrodes are held in place with a single screw and connect to the spark module via a simple push-on wire terminal — disconnect the wire first, then remove the mounting screw and lift the old electrode free. The ceramic insulator is more fragile than it looks; avoid gripping or prying on it directly, and handle it by the mounting bracket instead. Install the new WB13K10003 in the same position and orientation, making sure the tip sits at the correct gap and angle relative to the burner cap — too far and the spark won't reach the gas port, too close and it can short against the burner base. Reconnect the wire terminal, secure the mounting screw, and reinstall the burner cap and grate. Restore the gas supply and power, then test ignition at that burner position and check for leaks at any connection you touched before considering the job complete. Tools needed: Phillips or flat-blade screwdriver (model-dependent), soapy water for leak testing, work gloves. Frequently Asked Questions My burner doesn't click at all when I turn the knob. Is this the right part? Probably not, at least not by itself. If a burner produces no clicking sound whatsoever, the issue is more likely the spark module (the component that generates the high-voltage pulses) or the igniter switch behind the knob, rather than the electrode itself — an electrode can't spark if it's never receiving a pulse in the first place. This electrode is the right fix when you hear clicking at that burner position but it fails to ignite, sparks weakly, or ignites with a delay. The burner lights but with a small "whoof" and a delay. Is that dangerous? A delayed ignition means gas is flowing and accumulating for a moment before the spark finally catches it, which is exactly the kind of small buildup that produces that "whoof" sound and flare. It's not something to ignore — a weak or intermittent electrode is the common cause, and replacing it restores immediate, reliable ignition. If delayed ignition continues after replacing the electrode, have the burner and gas supply checked by a qualified technician rather than continuing to use it. Can I clean the electrode instead of replacing it? Light cleaning can sometimes help if the tip is coated in grease or food residue — gently wiping the ceramic and metal tip with a dry cloth or a small amount of rubbing alcohol may restore a weak spark caused purely by surface buildup. But if you see a cracked or chipped ceramic insulator, a visibly eroded or pitted tip, or the spark still fails after cleaning, the electrode itself has degraded and cleaning won't fix that — replacement is the correct next step. One burner sparks weakly but the others are fine. Does that rule out the spark module? Yes, generally. The spark module typically drives all the surface burner electrodes from the same unit, so if only one position is affected while the rest spark normally, the shared module is very unlikely to be the cause — the problem is isolated to that one electrode (or its individual wire connection). If every burner is weak or unreliable at the same time, that points toward the spark module instead. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the ceramic insulator design, tip geometry, mounting bracket, and wire connector of the original WB13K10003 electrode used in compatible GE, Hotpoint, and Kenmore gas ranges. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

316233903 Oven Genuine Temperature Sensor Replaces Part Numbers:  316233903, 316217008, 316233902, 316233900, AP5998652, PS11731754. Description: This Oven Temperature Sensor is a Genuine part for select Frigidaire, Kenmore oven models. It monitors and regulates the oven's temperature by sending accurate temperature readings to the control board. This ensures that the oven maintains the desired cooking temperature throughout the baking or roasting process.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WP98014893 Oven Genuine Gas Safety Valve Description: The Gas Safety Valve is an OEM replacement part for Whirlpool gas ranges. This important safety device works to automatically shut off the gas supply to the range if abnormal flame conditions, such as flame rollout, occur. Replaces Part Numbers:WP98014893, W11399433, 98014893, 1061522, 98007439, AP6014264, PS11747502.   California Residents only WARNING: California’s Proposition 65

Read more less

316490000 Oven Genuine OEM Temperature Sensor Product Overview The 316490000 Oven Genuine OEM Temperature Sensor is designed to accurately monitor oven temperature and ensure proper heating performance.  This Oven Sensor Assembly is a Genuine OEM part for select Frigidaire oven models, designed to accurately measure the oven's internal temperature and communicate it to the control board. This ensures that the oven maintains the desired temperature setting during baking or roasting, providing consistent cooking results.  Quick Answer If your oven is overheating, not heating properly, or showing incorrect temperature readings, the 316490000 temperature sensor may be faulty. Replacing it restores accurate temperature control and consistent cooking results. Replaces Part Numbers Replaces OEM part number: 316490000, 316490003, 1197392, 316490002, 612058426864, 7316490000, AH1528542, EAP1528542, AFR16190, PD00000483, OEM15854618, AP3963654, PS1528542. Compatibility This oven temperature sensor is compatible with select Frigidaire, Electrolux, Kenmore, and other compatible ranges and ovens. Frigidaire Ranges & Ovens Electrolux Appliances Kenmore Ranges Always verify your appliance model number before ordering. Common Problems This Part Fixes Oven overheating or under-heating Inaccurate temperature readings Uneven cooking results Error codes related to temperature sensor Key Features Genuine OEM temperature sensor Accurate temperature monitoring Reliable and durable construction Restores proper oven performance Product Specifications Part Number: 316490000 Part Type: Oven Temperature Sensor Brand: OEM Condition: New OEM / Aftermarket: Genuine OEM Application: Ovens & Ranges Troubleshooting Guide Oven too hot or too cold → Faulty temperature sensor Food overcooking or under-cooking → Incorrect temperature readings Error codes displayed → Sensor failure likely When Should You Replace This Sensor? Replace this sensor if your oven temperature is inconsistent, inaccurate, or if error codes indicate a sensor issue. Installation Notes ⚠️ Disconnect power before installation. Remove mounting screws, disconnect wiring, and install the new sensor securely. Refer to your appliance manual if needed. Related Parts Oven Control Board Heating Element Thermostat Components Frequently Asked Questions Will this sensor fit my oven?This sensor fits many Frigidaire and compatible models. Always verify your model number. What does an oven temperature sensor do?It monitors oven temperature and sends signals to maintain accurate heat levels. What are signs of a bad sensor?Inconsistent temperatures, error codes, or improper cooking results. Is this OEM?Yes, this is a genuine OEM temperature sensor. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Genuine OEM Parts Compatibility Support  

Read more less

DG32-00002B Range Oven Genuine Temperature Sensor Replaces Part Numbers: DG32-00002B, 2087461, DG32-00002A, AP4343210, PS4240743. Description: This Range Oven Temperature Sensor ensures precise temperature control for your cooking needs. This genuine OEM part is designed specifically for Samsung ranges, guaranteeing a perfect fit and reliable performance. By accurately monitoring oven temperatures, it helps maintain consistent cooking results, preventing under-cooked or burnt meals. Installing this sensor is straightforward, allowing you to restore your oven's functionality without hassle. Its durable construction ensures long-lasting use, providing peace of mind and enhancing your appliance's efficiency. Whether you're baking, roasting, or broiling, the Range Oven Temperature Sensor delivers the accuracy you expect from a high-quality component.

Read more less