Products

(2 Pack) WB07X10034CM Oven Door Handle Endcap (Black) Black oven door handle end-cap, 2 pack fits both right and left side-long. Fits GE ranges. Replaces Part Numbers: WB07X10034, WB07K10042, WB7K10042, WB7X10034, AH229187, EA229187, AP3623187, PS229187.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

(2 Pack) WB31M19CM 8" Porcelain Drip Pan Porcelain drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner. 8" Porcelain pan. Fits GE, Hotpoint range. Replaces Part Numbers: WB31M19, WB32X5069, WB31M0019, AH244373, EA244373, AP2028043, PS244373.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

(2 Pack) WB31M20CM Porcelain 6" Drip Pan Porcelain drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner. 6" Porcelain pan. Fits GE, Hotpoint range. Replaces Part Numbers: WB31M20, WB32X5070, WB31M0020, AH244375, EA244375, AP2028044, PS244375.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

(2 Pack) WB31X5010CM 6" Burner Drip Pan Chrome drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner. 6" Chrome pan/ring. Fits GE, Hotpoint range. Replaces Part Numbers: WB31X5010, 4, AH244466, DP101, EA244466, PM32X0101, PM32X101, SGP400, WB31X5010A, WB31X5010B, WB31X5010R, AP2028082, PS244466. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

(2 Pack) WB31X5013CM 6" Burner Trim Ring 6" Chrome ring. Fits GE, Hotpoint range. Replaces Part Numbers: WB31X5013, 340525, 5, WB31X0056, WB31X5008, WB31X5013A, WB31X5013B, WB31X5013DS, WB31X5013R, WB31X5015, WB31X56, AH244475, EA244475, AP2028085, PS244475. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

(2 Pack) WD01X21740 Dishwasher Mounting Bracket - Compatible with GE, Hotpoint, RCA Product Description Secure your dishwasher with the XPARTCO WD01X21740 Dishwasher Mounting Bracket. This high-quality replacement part is designed for select GE, Hotpoint, RCA, and other compatible dishwashers, ensuring a stable connection to the countertop or cabinet to prevent tipping during loading or unloading. Made of durable galvanized iron, it matches OEM standards for fit and performance, addressing issues like loose or wobbly dishwashers. Note: Includes one mounting bracket. Disconnect power before installation. Two brackets are typically required per dishwasher. Replaces part numbers: WD01X21740, WD01X10598, 4179435, PD00026672, EAP11700868, AP5981620, PS11700868. Compatibility: Compatible with models including but not limited to: GE: ADT521PGFOBS, CDT725SSFOSS, CDT765SSF1SS, CDT765SSFOSS, GDF510PGD0BB, GDF510PGD0WW, GDF510PGJ0BB, GDF510PGJ0WW, GDF510PGM0BB, GDF510PGM0WW, GDF510PSD0SS, GDF510PSJ0SS, GDF510PSM0SS, GDF520PGD0BB, GDF520PGD0CC, GDF520PGD0WW, GDF520PGJ0BB, GDF520PGJ0CC, GDF520PGJ0WW, GDF520PSF0SS, GDF520PSJ0SS, GDF540HGD0BB, GDF540HGD0WW, GDF540HGJ0BB, GDF540HGJ0WW, GDF540HSD0SS, GDF540HSJ0SS, GDF570SGD0BB, GDF570SGF0BB, GDF570SGF0CC, GDF570SGF0WW, GDF570SGJ0BB, GDF570SGJ0CC, GDF570SGJ0WW, GDF570SSF0SS, GDF570SSJ0SS, GDT530PGD0BB, GDT530PGD0WW, GDT530PSD0SS, GDT535PGJ0BB, GDT535PGJ0WW, GDT535PSJ0SS, GDT545PGJ0BB, GDT545PGJ0WW, GDT545PSJ0SS, GDT550HGD0BB, GDT550HGD0WW, GDT550HSD0SS Hotpoint, RCA: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and other compatible dishwashers. 🔐 Specifications: High-quality galvanized iron mounting bracket. 💪 Reliable Performance: Durable construction ensures stable dishwasher mounting and long-lasting use. 🛠️ Easy Installation: Requires screwdriver; typically installed in 5–10 minutes. 🛡️ Effective Fixes: Prevents dishwasher tipping, resolves loose or wobbly installations. Product Specification Part Number: XPARTCO WD01X21740 Component Type: Dishwasher mounting bracket Material: Galvanized iron Mounting: Screw-mounted to countertop or cabinet Operating Conditions: Suitable for household dishwasher environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dishwasher from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher secure today! Add to cart now for a reliable fix!

Read more less

(2 Pack) WD12X10304 Genuine GE OEM Rack End Cap Clip Replaces Part Number:  WD12X10304, 1556527, WD12X0344, WD12X344, WD30X97, AH2370502, EA2370502, OEM13454003, AP4484666, PS2370502. Description: This Rack Slide End Cap is a Genuine OEM part for specific GE dishwasher models. This small but essential component is designed to secure the end of the rack slide rail, preventing the dish racks from sliding off the track or becoming misaligned.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

(2 Pack) XP529MCB Washer Motor Carbon Brushes Fits Specific Washer Models. Fits Whirlpool AWM325 AWM326 Replaces Part Numbers: 481931088529, 481236248004 Fits Whirlpool A2000, AWG057-GB, AWM023/3/WS-GB, AWM027/WS-DA, AWM029/WS-GB, AWM045, AWM045-GB, AWM049/3, AWM049/3-GB, AWM1000, AWM1000/1, AWM1003, AWM1150, AWM1200, AWM1200/1, AWM1201, AWM1203, AWM1204/4, AWM1250, AWM1400, AWM1403, AWM1403/5, AWM1404/4, AWM219/1, AWM219AL/1, AWM220/1, AWM221, AWM228, AWM232, AWM234, AWM320, AWM320/3, AWM321, AWM321/3, AWM321/3AL, AWM321AL, AWM322, AWM323, AWM323-GB, AWM323/3, AWM323/3AL, AWM323AL, AWM324, AWM324/3, AWM325, AWM325/3, AWM326, AWM327, AWM327/3, AWM328, AWM328/3, AWM329, AWM330, AWM336/3, AWM337/3, AWM347, AWM370, AWM371, AWM373, AWM374, AWM5061, AWM5104, AWM5104/1, AWM5104/3, AWM5104/4, AWM5104/5, AWM5104/AL, AWM5104IX, AWM5105, AWM5106, AWM5125, AWM5125/1  Description: Washing machine brush set.   With brush holder. Replacement accessory for clothes washing appliance.  Washing machine brushes are an essential component for the correct functioning of your appliance. These brushes, made of durable and resistant materials, are responsible for generating friction with the motor and guaranteeing efficient washing. They are high quality spare parts, COMPATIBLE WITH VARIOUS BRANDS AND MODELS, easy to install and adjust. By replacing worn or damaged brushes, your washing machine will regain its optimal performance and avoid potential problems during the washing cycle. With the 481931088529 washing machine brushes, you will enjoy impeccable results and prolong the life of your appliance.      This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

2 Pack - XPARTCO 285753A Washer Direct Drive Motor Coupler The XPARTCO 285753A is an aftermarket replacement direct drive motor coupler (also called a motor coupling or drive coupler) compatible with a wide range of Whirlpool-family top-load washers including Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The motor coupler connects the drive motor shaft to the transmission — transferring the motor's power to the transmission to drive the agitator and spin the drum during wash and spin cycles. It is a deliberate weak point in the drivetrain: if the washer is overloaded, the coupler breaks apart first, protecting the far more expensive motor and transmission from damage. This is the updated 285753A design with metal sleeves for added strength — it replaces all previous coupler styles and versions including the original 285753, 280152, 285743, and 285140. This kit includes 2 plastic coupling halves and 1 rubber isolation dampener. Dimensions approximately 2" L x 1-1/4" W x 2" H. Fits direct-drive top-load washers only — not compatible with belt-drive machines. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 285753A Washer Motor Coupler fixes top-load washers that fill and drain normally but will not agitate or spin. The motor coupler connects the motor to the transmission — when it breaks, the motor runs but neither the agitator nor the drum moves. Kit includes 2 plastic coupling halves and 1 rubber dampener. Updated design with metal sleeves. Replaces all previous coupler versions including 285753, 280152, 285743, 285140. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, and more direct-drive top-load washers. Common Problems This Part Fixes Washer fills with water and drains but will not agitate or spin Motor runs (you can hear it) but agitator and drum do not move Washer spins slowly or incompletely — clothes still very wet after spin cycle Loud humming or buzzing from the motor area without agitation or spin Burning rubber or plastic smell during the wash or spin cycle Washer shakes excessively — broken coupler causing uneven power transfer Broken plastic or rubber pieces visible inside the bottom of the washer cabinet Replaces Part Numbers This motor coupler directly replaces the following OEM and cross-reference part numbers: 285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AWP39583, PD00002353, AH1485646, EAP1485646, EA1485646, TJ285753, ER285753, AP3963893, PS1485646. The 285753A replaces all previous motor coupler styles and versions. If your parts diagram shows any of the older numbers above, the 285753A is the correct current replacement. Compatibility This motor coupler is compatible with select direct-drive top-load washers from the following brands: Whirlpool top-load washers (direct drive — no belt) Kenmore / Sears top-load washers — 70 series, 80 series, 90 series, and 110 series (Whirlpool-built) KitchenAid top-load washers Maytag top-load washers (direct drive models) Amana top-load washers Roper top-load washers Admiral top-load washers Estate top-load washers Crosley top-load washers Inglis top-load washers Magic Chef top-load washers Important: The 285753A is for direct-drive top-load washers only — machines where the motor connects directly to the transmission without a belt. It is not compatible with front-load washers or older belt-drive top-load washers. If you can see a drive belt inside your washer cabinet, this is not the correct part. Key Features Connects the drive motor shaft to the transmission — transfers motor power to drive the agitator and spin drum Intentional sacrificial part — designed to break before the motor or transmission during overload, saving far more expensive components Updated 285753A design with metal sleeves — stronger than original all-plastic versions; replaces all previous coupler styles Kit includes 2 plastic coupling halves and 1 rubber isolation dampener — complete assembly Dimensions: approximately 2" L x 1-1/4" W x 2" H Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef direct-drive washers Replaces all previous coupler versions including 285753, 280152, 285743, and 285140 Aftermarket replacement built to OEM-equivalent quality standards Cost-effective DIY repair — typically under $15 and 30–45 minutes of work Product Specifications Part Number 285753A Part Type Washer Direct Drive Motor Coupler (Motor Coupling Kit) Condition Aftermarket Replacement Application Direct-Drive Top-Load Washers (no belt) Dimensions Approx. 2" L x 1-1/4" W x 2" H Color Black / Off-White Material Rubber / Plastic / Metal (metal sleeve inserts) Kit Includes 2 plastic coupling halves, 1 rubber isolation dampener Compatible Brands Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Remove the washer's cabinet by releasing the top panel clips and removing the front panel screws — the motor and transmission are at the bottom of the machine. The motor coupler is a three-piece assembly between the motor shaft and the transmission input shaft. Pull the motor forward to release it from the mounting clips. The broken coupler pieces will likely fall out at this point — inspect the motor shaft and transmission shaft for any remaining plastic debris and clear it. Press the new rubber dampener onto the motor shaft coupling half first, then onto the transmission shaft coupling half, and snap the motor back into the mounting clips. Verify both coupler halves are seated securely and the rubber dampener is centered between them. Reassemble the front panel and top panel. Restore power and run a short cycle to confirm the agitator and spin function normally. Work gloves recommended — sharp sheet metal edges inside the cabinet. Tools needed: Phillips screwdriver, 1/4" nut driver, flat-head screwdriver, work gloves. Frequently Asked Questions What does the motor coupler do? The motor coupler is a three-piece assembly — two plastic coupling halves and a rubber dampener — that connects the drive motor shaft to the transmission input shaft in direct-drive washing machines. The motor spins the coupler, which transfers that rotation to the transmission, which in turn drives the agitator and drum. The rubber dampener absorbs shock and vibration between the rigid motor and transmission shafts during direction changes. The coupler is intentionally designed as the weakest link in the drivetrain — if the washer is overloaded or the transmission seizes, the coupler breaks first to protect the far more expensive motor and transmission from damage. My washer fills and drains but won't agitate or spin — is the motor coupler the cause? Yes — this is the classic symptom of a broken motor coupler. Because the pump is typically driven directly by the motor before the coupler connection, a broken coupler allows the motor to run and the pump to drain normally, but neither the agitator nor the spin drum receives any power. If you can hear the motor running but nothing moves, open the washer cabinet and inspect the coupler — you will likely find broken plastic pieces at the bottom of the cabinet near the motor and transmission. Why does the motor coupler break? The most common cause is overloading — packing too many heavy items into the washer creates enough mechanical resistance that the coupler snaps rather than allowing the motor to be damaged. Other causes include a worn or seized transmission, a worn motor, normal wear over many years of use, or a single sudden jam caused by a foreign object. If your coupler breaks a second time shortly after replacement, inspect the transmission for signs of wear or binding — a stiff or seized transmission will continue to break new couplers. What is the difference between 285753 and 285753A? The 285753A is the updated current version that superseded the original 285753. The A version incorporates metal sleeve inserts in the plastic coupling halves for improved strength and durability compared to the original all-plastic design. The 285753A replaces all previous versions — including 285753, 280152, 285743, and 285140 — and is the correct part to order regardless of which older number is listed in your washer's parts diagram. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and performance of the original 285753A motor coupler. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WB02X35488 (2 Pack) Microwave Halogen Light Bulb Product Overview The XPARTCO WB02X35488 Microwave Halogen Light Bulb provides bright interior illumination for your microwave, allowing you to clearly monitor cooking progress. Brighten your microwave with the replacement WB02X35488 Microwave Halogen Light Bulb. This high-quality Light bulb, designed for GE, Hotpoint, and Kenmore/Sears microwaves, provides clear illumination for the interior or surface below, ensuring easy monitoring of your cooking. Featuring a G8 bi-pin base (120V, 50W, 3000K warm white), this durable halogen bulb offers reliable performance and easy installation. Quick Answer If your microwave light is dim, flickering, or not working, the WB02X35488 halogen bulb may be burned out. Replacing it restores clear visibility while cooking. Replaces Part Numbers Replaces OEM part number: WB02X35488, WB08X10057, WB08X10051, WB25X25393, WB36X10292, AGE368071, PD00070655, EAP6989401, AP6989401, PS16216934. Compatibility This microwave halogen light bulb is compatible with select GE, Hotpoint, and other GE-manufactured microwaves. GE: CSA1201RSS01, CSA1201RSS02, CSA1201RSS03, CVM1790SS1SS, CVM1790SS2SS, JVM1790BK01, JVM1790CK01, JVM1790SK01, JVM1790WK01, JNM3163RJ1SS, JNM3163RJ2SS, JNM3163RJ3SS Hotpoint: Select models requiring WB08X10057 or compatible halogen bulbs Kenmore/Sears: Select models requiring WB08X10057 or compatible halogen bulbs Always verify your appliance model number before ordering. Common Problems This Part Fixes Microwave interior light not working Dim or flickering light Reduced visibility while cooking Key Features Bright halogen illumination Restores clear interior visibility High-quality aftermarket replacement Easy bulb replacement design Product Specifications Part Number: WB02X35488 Part Type: Microwave Halogen Light Bulb, 120V, 50W, G8 bi-pin base, 1.69" x 0.5", 3000K warm white, 2400 lumens, dimmable, 2000-hour average life, copper contacts. Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Application: Microwave Interior Lighting Troubleshooting Guide No interior light → Burned out bulb Flickering light → Failing bulb Dim light → Aging or damaged bulb When Should You Replace This Bulb? Replace this bulb if your microwave interior light is not functioning properly or has become dim or inconsistent. Installation Notes ⚠️ Disconnect power before installation. Allow the bulb to cool before handling and replace carefully according to your microwave model. Related Parts Microwave Door Switch Control Panel Turntable Motor Frequently Asked Questions Will this bulb fit my microwave?This bulb fits many GE and compatible models. Always verify your model number. Is this a halogen bulb?Yes, this is a halogen light bulb designed for microwave use. What are signs of a bad bulb?No light, dim light, or flickering indicates replacement is needed. Is installation difficult?Most bulbs are easy to replace, but always follow your appliance manual. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less

2 Pack - XPIBE1740 Microwave Light Bulb (40W) – for Microwave Ovens Product Description Restore bright interior lighting in your microwave with the XPIBE1740 Microwave Light Bulb (40W, E17 Base). This high-quality replacement bulb provides reliable illumination so you can clearly monitor food while cooking. A burned-out microwave bulb can make it difficult to see inside the cavity during operation. Replacing it with this durable 40-watt bulb ensures proper visibility and safe cooking. This replacement bulb is designed for compatibility with a wide range of microwave oven models and offers dependable performance at a cost-effective price. Replaces Part Numbers 8206232A, 8206443, 8183993, 0053437, 05200136, 05200137, 14209237, 14210453, 14210811, 14218311, 14218312, 14218318, 1890433, 2635-0004, 2635-0005, 2665-0003, 4158344, 4158365, 4158432, 4164062, 4166665, 4174608, 4338831, 4359625, 4393681, 53001372, 53422, 53437, 56001071, 56001089, 57001073, 7-47000, 7-47001, 747000, 747001, 8189961, 8204855, 8205422, 8205586, 8206232, R0712013, R0712015, R0713503, R9900310, W10321375, W10598935, Y0053422, Y0053437, Y05200136, Y05200137, Y747000, Y747001, AWP39609, PD00003046, AH2376034, EA2376034, AP4512653, PS2376034, WB25X10030, 261201500480, 3015548, AGE22225 PD00034740, AP5809052, PS8767095, 26QBP4093. Compatibility This microwave light bulb (40W) fits many Whirlpool, GE, Samsung, LG, Frigidaire, KitchenAid, and Kenmore microwave ovens. Common compatible applications include: Over-the-range microwaves Countertop microwaves Built-in microwave units Always verify wattage (40W), voltage, and (E17) base type before ordering.Contact our support team if you’re unsure. ✅ Key Features 💡 Bright 40W Illumination – Clear visibility inside microwave 🔄 Universal Replacement – Fits many common microwave models 🔧 Easy Installation – Simple screw-in design (model dependent) 💪 Durable Construction – Designed for high-temperature appliance use 💰 Cost-Effective Replacement – Affordable alternative to OEM bulbs ⚠️ Symptoms If your microwave is experiencing any of the following issues, this part may need replacement: 💡 Interior light not turning on 🌑 Dim or flickering light ⚠️ Burned-out bulb 🔍 Difficulty seeing food while cooking Replacing this bulb restores proper visibility and improves cooking convenience. 📐 Product Specification Part Number: XPIBE1740 Component Type: Microwave Light Bulb Wattage: 40 watts. Voltage: 110V-130V. Application: Microwave interior lighting Base Type: Clear, Incandescent Light Bulb, E17 Base. Quality Level: Aftermarket replacement 🛠️ Installation Notes Tools Needed: Screwdriver (for access panel, if required) ⚠️ Safety First: Unplug the microwave before replacing the bulb to avoid electrical shock. Basic Steps: Disconnect microwave power. Remove bulb cover or access panel (if applicable). Unscrew and remove the old bulb. Install the new XPIBE1740 40W bulb. Reinstall cover and restore power. Test light operation. ⏱️ Time Required: Under 10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Replacement Parts 🔄 30-Day Return Policy Restore clear visibility inside your microwave — Add to Cart Now for a quick and easy fix!

Read more less

(20 Pack) 15A Slow-Blow Ceramic Line Fuse, 6.35 x 32 mm, 15A 250V - Compatible with GE, Whirlpool, Kenmore, and Other Appliances Product Description Safeguard your appliances with the replacement 15A Slow-Blow Ceramic Line Fuse, 6.35 x 32 mm, 15A 250V. This high-quality, time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances such as microwaves, washers, dryers, and HVAC systems. With a durable ceramic body, this fuse (6.35 x 32 mm, 15A, 250VAC/125VDC) protects circuits from over-current and short circuits while handling brief surges, ensuring reliable performance. Note: Includes one slow-blow ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements. Replaces part numbers: WB27X7, 14QBP15CFB, AP2626454, PS240270, WPM0805102, AP6014670, PS4131368, M0805102, MDA-15, 0326015.HXP, 0326015.MXDP, BK1-MDP-15-R, BK-MDP-V-15-R, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WB27X10454, AP3189379, PS239596 Compatibility: Compatible with appliances including but not limited to: GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04 Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0 Kenmore Microwaves: 721.62649200, 665.68612800 Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0 Whirlpool Dryers: WED5300SQ0 Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 15A 250V slow-blow fuses Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, and other appliances using 3AB/3AG fuses. 🔥 Specifications: replacement slow-blow ceramic fuse, 15A, 250VAC/125VDC, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, time-delay, 4.5 mOhms resistance, 10kA interrupting rating at 125VAC, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes. 🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and HVAC systems. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less