XPARTCO WH08X37938 Washer Lid Switch Assembly – Compatible with GE, Hotpoint, and RCA Washers Product Description Ensure safe and dependable washer operation with the XPARTCO WH08X37938 Washer Lid Switch Assembly. This Lid Lock Service Kit is a replacement part for specific GE washing machine models. This kit includes the components necessary to ensure that the washer lid remains securely locked during operation, preventing the lid from being opened when the washer is in use. This safety feature is crucial for top-load washers, ensuring safe and efficient operation by preventing access to the washer drum during cycles. Replaces Part Numbers WH08X37938, WH08X32697, WH02X24399, WH08X32657, WH01X26694, WH01X24112, WH01X24114, WH01X26114, WH01X27954, WH08X31577, WH08X31222, AP7225583, PD00087323, EAP17626546, PS17626546. Compatibility This replacement lid switch assembly fits select GE, Hotpoint, and RCA top-load washers. Example compatible models include (but are not limited to): GE GTW335ASN0WW, GE GTW465ASN1WW, and Hotpoint HTW240ASK6WS. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM safety and performance standards 🚪 Reliable Lid Detection – Prevents washer operation when the lid is open for added safety 💰 Cost-Effective Fix – Delivers OEM-level quality at a lower price 🛠️ Easy Installation – Plug-and-play wiring harness for quick setup 🛡️ Fixes Common Issues – Solves washer not starting, spin interruption, or lid-lock error problems 📐 Product Specification Part Number: WH08X37938 Component Type: Washer Lid Lock / Switch Assembly Material: Reinforced plastic housing with pre-wired electrical harness Mounting: Direct-fit installation beneath washer top panel Operating Conditions: Designed for wet and high-vibration environments Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock. Steps: Unplug the washer and lift the top control panel. Remove the old lid switch assembly and disconnect the wiring harness. Install the new XPARTCO WH08X37938 switch in the same position. Reconnect the harness and secure the assembly with screws. Close the control panel, restore power, and test washer operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your washer’s safety and reliability — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO WH10X20821 Washer Door Lock Front Door Washer Door Lock Fits select GE Washer models. Replaces Part Numbers: WH10X20821, AP5958532, PS11699522. Description: This Washer Door Lock Switch Assembly is an essential component for maintaining the security and functionality of select GE washer models. This replacement part ensures reliable door locking, preventing leaks and interruptions during your laundry cycles.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO WH12X955 Washer Lid Switch for GE & Hotpoint Washer/Dryer Combos – Reliable OEM Replacement 🔧 Product Description:Ensure safe and efficient operation for your GE or Hotpoint washer/dryer combo with the XPARTCO WH12X955 Washer Lid Switch, a premium, OEM-compatible replacement. This essential safety switch detects lid closure, preventing the unit from agitating or spinning when open, protecting your appliance and household. Built from high-quality plastic with a secure wiring harness, it provides durable performance and precise activation. Ideal for DIY repairs, this switch resolves issues like non-spinning cycles or error codes in 20–40 minutes. Key Features: 🔧 Broad Compatibility: Fits GE, Hotpoint, and select washer/dryer combo models (see below). 💪 Durable Build: High-impact plastic housing with reliable wiring for long-term use. ⚙️ Simple Installation: Replace with basic tools in minutes – no professional needed. 🔒 Safety-Focused Design: Ensures accurate lid detection to prevent unsafe operation. 🛡️ 30 Days Hassle-Free Return: Shop with confidence with our risk-free return policy. Compatibility:Fits numerous GE and Hotpoint washer/dryer combo models, including: WSM2420D0WW, WSM2420D0CC WSM2420D1WW, WSM2420D2WW WSM2420D3WW, WSM2420SCZAA WSM2420TAACC, WSM2480D1WW WSM2480TBAAA Replaces Part Numbers: WH12X955, 278666, AH270219, EA270219, PD00030733, EAP270219, PS270219, AP2045786, WH12X0955, EXPWH12X955Verify fit with your model’s manual or serial number. Specifications: Material: High-Impact Plastic with Wiring Harness Part Number: WH12X955 (XPARTCO Brand) Installation Instructions: Unplug the washer/dryer combo and turn off the water supply. Remove the top panel by unscrewing rear bolts and sliding it back. Locate the old lid switch near the lid hinge, disconnect the wiring harness, and remove mounting screws. Install the XPARTCO switch, reconnect the harness, and secure in place. Reassemble the panel, plug in, and test a cycle.Shop Now for free, fast shipping and a 30-day hassle-free return policy! Customer Reviews:⭐⭐⭐⭐⭐ “Fixed my GE combo unit's spin problem in 25 minutes – works like new!” – Karen L.⭐⭐⭐⭐⭐ “Perfect fit for my Hotpoint WSM2420, easy install and reliable!” – Steve R. Add to Cart and restore safe, efficient washing today! FAQs:Q: Will this fit my GE washer/dryer combo?A: The XPARTCO WH12X955 fits most GE and Hotpoint combo models. Check your model number or contact support to confirm.Q: Is this an OEM part?A: It’s a premium aftermarket part engineered to meet or exceed OEM standards.Q: How do I install it?A: Use basic tools for a quick swap. Follow our digital guide or YouTube tutorial for step-by-step help.

Read more less

XPARTCO WH23X28418 Washer Drain Pump - Compatible with GE, Hotpoint Product Description Restore your washer’s drainage with the WH23X28418 Washer Drain Pump. This replacement drain pump is designed as a replacement for select GE, Hotpoint, and other compatible front-load washing machines, offering a cost-effective alternative to the original. It efficiently removes water and soap from the washer during the drain cycle, ensuring proper operation. This part addresses issues like water remaining in the drum, noisy operation, failure to drain, or leaks, often caused by a clogged, damaged, or failed drain pump. Note: Includes (1) drain pump and motor with harness. Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: WH23X24178, WH23X28418, WH23X27574, 290D1201G001, 290D1201G002, 290D1201G003, PD00055680, EAP12723115, AP6889136, PS12723115. Compatibility: Compatible with select washer models, including but not limited to: GE: GTW485ASJ3WS, GTW485ASJ4WS, GTW485ASJ5WS, GTW490ACJ, GTW500ASN0WS, GTW680BPL0DG, GTW680BPL1DG, GTW720BPN0DG, GTW725BPN0DG, GTW465ASN1WW Hotpoint: HTW240ASK0WS, HTW240ASK2WS, HTW240ASK4WS RCA: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and RCA front-load washers. 🔧 Specifications: 120V, 60Hz, 1.25A, plastic and metal construction, includes pump, motor, and harness. 💪 Reliable Performance: Efficiently removes water and soap for consistent drainage. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves water remaining in drum, noisy operation, failure to drain, or leaks. Product Specification Part Number: XPWH23X28418 Component Type: Washer drain pump Material: Plastic and metal Electrical Specs: 120V, 60Hz, 1.25A, CL.A Run Time: 10 min on, 50 min off. Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO WR07X10097 Refrigerator Compressor Overload Relay – Compatible with GE, Hotpoint, and Kenmore Refrigerators Product Description Restore proper compressor protection and reliable cooling with the XPARTCO WR07X10097 Refrigerator Compressor Overload Relay. This Start Device Assembly is a replacement part for Specific refrigerator models. It is a kit that includes the start relay and overload, both of which are crucial components for the proper operation of the compressor. The start relay is responsible for initiating the compressor's operation by providing an electrical boost to start the motor. The overload, on the other hand, acts as a protective device. It monitors the current flow and protects the compressor from overheating or electrical overload. Replaces Part Numbers WR07X10097, 1265640, AH1766101, EA1766101, PD00008007, EAP1766101, AP4300623, PS1766101. Compatibility This replacement compressor overload relay fits select GE, Hotpoint, and Kenmore refrigerators. Example compatible models include (but are not limited to):GE GTS18HGTHWW, GTS22KGNRWWHotpoint HSS25GFTSAKenmore 363.9557710 Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM electrical protection performance 🔌 Compressor Safety Protection – Prevents overheating and electrical overload damage 🔇 Reduces Clicking Issues – Helps resolve start-up clicking or compressor cycling 💰 Cost-Effective Solution – Reliable alternative to OEM parts 🛡️ Fixes Common Issues – Solves compressor not starting, intermittent cooling, or shutdowns 📐 Product Specification Part Number: WR07X10097 Component Type: Refrigerator Compressor Overload Relay Material: Heat-resistant housing with internal thermal protection Mounting: Direct-fit on compressor terminals Function: Overcurrent and overheat protection Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Unplug the refrigerator before servicing. Compressor components may be hot—allow time to cool. Steps: Disconnect power and remove the rear lower access panel. Locate the overload relay attached to the compressor terminals. Carefully disconnect the old relay. Install the new XPARTCO WR07X10097 overload relay securely. Reinstall the access panel and restore power. Allow several minutes for compressor startup. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your refrigerator compressor and restore reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO WR07X10131 Refrigerator Compressor Overload Relay Replaces Part Numbers: WR07X10131, WR08X10074, WR08X10089, WR08X10111, WR09X10124, AH2577842, EA2577842, AP4538934, PS2577842. Description:  This Start Device Assembly is a replacement part for Specific GE refrigerator models. It is a kit that includes the start relay and overload, both of which are crucial components for the proper operation of the compressor. The start relay is responsible for initiating the compressor's operation by providing an electrical boost to start the motor. The overload, on the other hand, acts as a protective device. It monitors the current flow and protects the compressor from overheating or electrical overload.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO WR08X22874 Refrigerator Relay and Overload Kit – Compatible with GE, Hotpoint & Kenmore Refrigerators Product Description Restore dependable compressor startup and cooling performance with the XPARTCO WR08X22874 Refrigerator Relay and Overload Kit. This high-quality replacement part includes the start relay and overload protector that work together to safely start the compressor and protect it from overheating or electrical overload. A failed relay or overload can cause clicking noises, intermittent cooling, or a refrigerator that won’t start. Replacing both components together ensures proper compressor operation and long-term reliability. Replaces Part Numbers WR08X22874, 4454642, 197D8031P005, PD00039282, EAP11701228, AP5970731, PS11701228. Compatibility This replacement relay and overload kit fits select GE, Hotpoint, and Kenmore (GE-manufactured) refrigerators. Example compatible models include (but are not limited to):GE GTS18HGTHWW, GTS22KGNRWWHotpoint HSS25GFTSAKenmore 363.9557710 Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement Kit – Designed to match OEM compressor start performance 🔌 Complete Compressor Protection – Includes start relay and overload protector 🔇 Reduces Clicking & No-Start Issues – Helps restore reliable compressor startup 💰 Cost-Effective Repair – Quality alternative to OEM start kits 🛡️ Fixes Common Issues – Solves refrigerator not cooling, compressor not starting, or repeated shutdowns 📐 Product Specification Part Number: WR08X22874 Component Type: Refrigerator Compressor Relay & Overload Kit Includes: Start relay and overload protector Mounting: Direct-fit onto compressor terminals Application: Compressor start and thermal protection Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Unplug the refrigerator before servicing. Compressor components may be hot—allow time to cool. Steps: Disconnect power and remove the rear lower access panel. Locate the relay and overload attached to the compressor. Carefully remove the old components. Install the new XPARTCO WR08X22874 relay and overload kit. Reinstall the access panel and restore power. Allow several minutes for the compressor to start. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore reliable refrigerator cooling — Add to Cart Now for a dependable, budget-friendly compressor start solution!

Read more less

WR17X11653 Refrigerator Dispenser Ice Door Flapper – Replacement for GE and Hotpoint Product Overview The WR17X11653 Refrigerator Dispenser Ice Door Flapper is an aftermarket replacement part that covers the ice chute in your refrigerator’s dispenser. It opens when dispensing ice and closes to prevent warm air and moisture from entering the freezer compartment. A broken or worn ice flapper can lead to frost buildup, melting ice, and energy inefficiency. Replacing it restores a proper seal and reliable dispenser performance.  This Ice Door Assembly is a replacement part for specific GE refrigerator models. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup. Replaces Part Numbers This part replaces WR17X11653, WR17X3093, WR17X3492, AH964304, EA964304, AP3672582, PS964304. It is designed to match the dimensions and functionality of the original GE part. Compatible Brands Compatible with GE, Hotpoint, and Kenmore refrigerators built by GE. Fits many side-by-side models with front-mounted ice and water dispensers. Fixes the Following Issues Frost or condensation in dispenser area Ice chute not sealing properly Warm air entering freezer compartment Flapper missing, cracked, or stuck Why Buy from Parts‑O‑Matic Reliable aftermarket replacement part Fast and free shipping in the U.S. Easy installation with no special tools Trusted by DIYers and appliance repair pros

Read more less

XPARTCO WR30X10093 Refrigerator OE Ice Maker – Compatible with GE, Hotpoint, and Crosley Refrigerators Product Description Replace your broken or under-performing ice maker with the XPARTCO WR30X10093 Refrigerator OE Ice Maker. This high-quality Original Equipment (OE) replacement produces and dispenses fresh ice automatically, matching the performance and reliability of the factory original. A failed ice maker can result in no ice production, leaking, or jammed cubes. Installing this OE-grade part restores proper ice production quickly and efficiently. What is OE?“OE” (Original Equipment) parts are manufactured to the same specifications, materials, and performance standards as OEM (Original Equipment Manufacturer) components. They deliver identical fit and function but are offered under trusted brands like XPARTCO at a better value for consumers. Replaces Part Numbers WR30X10093, WR30X10102, WR29X10080, WR29X5162, SWR29X5121, SWR29X5126, WR29X0191, WR29X20949, WR29X5007, WR29X5012, WR29X5023, WR30M0149, WR30M0153, WR30X0138, WR30X0147, WR30X0148, WR30X0159, WR30X0169, WR30X0199, WR30X0203, WR30X0213, WR30X0214, WR30X0238, WR30X0241, WR30X0259, WR30X0282, WR30X0283, WR30X0289, WR30X0290, WR30X0304, WR30X0306, WR30X0307, WR30X0315, WR30X0318, WR30X0320, WR30X0327, WR30X0328, WR30X0329, WR30X10012, WR30X10014, WR30X10044, WR30X10058, WR30X10061, WR30X10082, WR30X10109, WR30X10139, WR30X148, WR30X27952, WR30X28735, WR30X29421, WR30X320, AH1993870, PD00000998, EAP1993870, AP4345120, EA1993870, PS1993870. Compatibility This OE ice maker is compatible with select GE, Hotpoint, and Crosley refrigerators. Example compatible models include (but are not limited to): GE GSS25GSHRCSS, GE GFE29HSDASS, and Hotpoint HSS25IFMDWW. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 OE Replacement – Matches factory specifications for GE refrigerators ❄️ Consistent Ice Production – Produces uniform, clear ice cubes automatically 💰 Affordable Quality – OE construction at a lower price than OEM retail 🛠️ DIY Ready – Simple plug-and-play installation with included wiring harness 🛡️ Fixes Common Issues – Solves no-ice, leaking, or jammed cube problems 📐 Product Specification Part Number: WR30X10093 Component Type: Refrigerator Ice Maker Assembly Material: Durable plastic housing, stainless-steel ejector arm Mounting: Direct-fit replacement in freezer compartment Operating Conditions: Designed for standard household freezer operation Compliance: OE (Original Equipment) quality – same form, fit, and function as OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect refrigerator from power. Remove the ice bin and freezer shelf to access the old ice maker. Unscrew and disconnect the wiring harness from the existing unit. Mount the new XPARTCO WR30X10093 ice maker in position. Connect the harness and secure mounting screws. Restore power and allow 24 hours for full ice production. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧊 OE-Quality Replacement by XPARTCO 🔄 30-Day Return Policy Enjoy fresh ice again — Add to Cart Now for an OE-quality, factory-fit solution!

Read more less