W11236851 Refrigerator Genuine OEM Air Damper Diffuser The W11236851 is a genuine Whirlpool OEM air damper diffuser assembly for Whirlpool refrigerators, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea models. Located inside the refrigerator behind the evaporator cover, this damper controls the flow of cold air from the freezer into the refrigerator compartment, opening and closing as needed to maintain the set temperatures in each section. Causes of a bad damper include wear and tear of the movable parts over time, failure of the actuator motor that powers it, or damage from something accidentally blocking the damper mechanism. Symptoms of a failing damper include the refrigerator section running too cold or too warm, the freezer section running too cool or too warm, difficulty maintaining set temperatures, excessive condensation inside the appliance, or ice accumulation. It directly replaces 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010. Quick Answer The W11236851 Refrigerator Genuine OEM Air Damper Diffuser fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea refrigerators where the fridge or freezer section runs too warm or too cold, temperatures are hard to maintain, or you notice excessive condensation or ice buildup. Replaces 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010. Check that nothing is accidentally blocking the damper mechanism before assuming it has failed — food items or packaging pushed against it can cause the same symptoms as a worn or broken damper. Common Problems This Part Fixes Refrigerator section too cold Refrigerator section too warm Freezer section too cool Freezer section too warm Excessive condensation inside the appliance Ice accumulation Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator air damper diffuser directly replaces the following OEM and cross-reference part numbers: W11236851, 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This air damper diffuser is compatible with select Whirlpool refrigerators, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea refrigerators built on the Whirlpool platform. Note: Always verify your full model number before ordering, since Whirlpool uses several different damper designs across its refrigerator lineup. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified damper and actuator design Controls cold airflow from the freezer into the refrigerator compartment Resolves "too cold," "too warm," "excessive condensation," and "ice accumulation" symptoms Located behind the evaporator cover Direct drop-in replacement matching the original mounting and connections Replaces 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number W11236851 Part Type Refrigerator Air Damper Diffuser Assembly Condition Genuine OEM Brand Whirlpool Location Behind the evaporator cover Function Controls cold airflow between the freezer and refrigerator compartments Repair Difficulty Moderate Quantity 1 damper assembly Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator Before Starting — Check For Blockages First Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Before disassembling anything, check whether food items or packaging have been accidentally pushed against the damper mechanism, since this can cause the same temperature symptoms as a genuinely failed part. Locate the evaporator cover, typically in the freezer or at the back of the fresh food compartment depending on your model, and remove it to access the damper assembly. Photograph the wiring connection to the actuator motor before disconnecting anything. Disconnect the wiring harness from the old damper assembly, remove any mounting clips or fasteners, and pull it free. Install the new W11236851 in the same position, reconnect the wiring harness fully, and secure any mounting hardware. Reinstall the evaporator cover. Restore power and monitor both the refrigerator and freezer temperatures over the next 24 hours to confirm consistent, accurate cooling in both compartments. Tools needed: Phillips screwdriver (model-dependent), work gloves. Frequently Asked Questions My refrigerator section is too warm but the freezer is fine. Is this the part I need? Yes, this is a common symptom of a failing air damper. Since this damper controls how much cold air moves from the freezer into the refrigerator compartment, a stuck or broken damper can leave the refrigerator section too warm even while the freezer maintains a normal temperature. My freezer or fridge is too cold instead of too warm. Could this still be the damper? Yes. A damper stuck in the open position can let too much cold air flow into the refrigerator compartment, making it colder than intended, while a damper stuck closed can have the opposite effect. Both too-cold and too-warm symptoms in either compartment can point to this same part. What should I check before assuming the damper itself is broken? Check that nothing — food packaging, containers, or shifted items — is physically blocking the damper mechanism, since accidental blocking can produce the same temperature symptoms as a genuinely worn or failed damper, without requiring a replacement part at all. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original damper and actuator design of the air damper diffuser originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine Whirlpool OEM Whirlpool WPW10184813 Refrigerator Genuine OEM Ice Dispenser Motor Genuine OEM ice-dispenser door motor for select Whirlpool-built refrigerators. Product Overview The Whirlpool WPW10184813 Refrigerator Ice Dispenser Door Motor is a Genuine Whirlpool OEM replacement part. It opens and closes the ice chute door during dispenser operation so ice can pass through the chute and the door can reseal afterward. A failed motor can cause the dispenser door to remain stuck open or closed, prevent ice from dispensing correctly, or allow warm room air to enter the chute area. Quick Answer WPW10184813 is the Genuine Whirlpool OEM ice-dispenser door motor that replaces W10184813 and 2305262. Verify the complete refrigerator model number before purchase. Common Problems This Part May Fix Ice dispenser door will not open Ice chute door will not close Ice maker makes ice but ice will not dispense Chute door sticks or operates intermittently Warm air enters around the dispenser chute Frost or moisture develops around the dispenser opening Replaces and Cross-References WPW10184813, 1489085, 2305262, AP6016508, EAP11749796, W10184813, AWP49407, OEM18049533, PD00006398, PS11749796 Cross-reference numbers are provided for identification. Always verify compatibility by complete refrigerator model number. Compatibility Used on select Whirlpool-built refrigerators sold under Whirlpool, KitchenAid, JennAir, Maytag, and Kenmore brand names. Compatible model examples include: GI7FVCXWY00 KSCS25FTMS02 KSRS25FTSS01 KSCS23FVMS02 KSRS25RSBT01 KSCS25FVMS01 KSCS25FTSS00 GC3NHAXVA00 106.56702500 Important: This is only a partial model list. Confirm the complete model number from the refrigerator identification label before ordering. Key Features Genuine Whirlpool OEM part Operates the ice dispenser chute door Replaces W10184813 and 2305262 For select Whirlpool-built side-by-side and French-door refrigerators Helps restore proper dispenser-door opening and closing Product Specifications Manufacturer Part Number WPW10184813 Brand Whirlpool Part Type Refrigerator Ice Dispenser Door Motor Condition New Quality Genuine OEM Application Ice Dispenser Chute Door Package Quantity 1 Motor Installation Notes Disconnect refrigerator power before service. Remove the dispenser trim and front components according to the appliance service procedure. Photograph connector and mechanical linkage positions before disassembly. Inspect the chute door, hinge, spring, and linkage for binding or damage before replacing the motor. Transfer or reconnect the wiring and linkage exactly as originally installed. Reassemble all dispenser parts and verify the chute door opens and fully closes before returning the refrigerator to service. Diagnostic tip: A dispenser that will not release ice can also be caused by an actuator, dispenser switch, control board, auger motor, frozen chute, or mechanical obstruction. Diagnose the dispenser system before replacing parts. Frequently Asked Questions Is WPW10184813 a Genuine Whirlpool OEM part? Yes. WPW10184813 is a Genuine Whirlpool OEM ice-dispenser door motor. Does it replace W10184813? Yes. Whirlpool lists WPW10184813 as the replacement for W10184813 and 2305262. What does this motor do? It opens and closes the dispenser chute door so ice can pass through the chute and the opening can reseal after dispensing. Will it fit every Whirlpool refrigerator? No. Verify the complete refrigerator model number before ordering because dispenser designs vary by model and production revision. Shop With Confidence Genuine Whirlpool OEM replacement part. Verify your complete refrigerator model and original part number before ordering. Genuine OEMIce Dispenser MotorCompatibility SupportFast U.S. Shipping

Read more less

Genuine Whirlpool OEM Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute Genuine OEM ice chute door for select Whirlpool, KitchenAid, JennAir, and Kenmore side-by-side refrigerators. Product Overview The Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute is a Genuine OEM dispenser component that opens to allow ice to pass through the chute and closes to help seal the dispenser opening when not in use. A damaged, warped, or sticking chute door can allow ice to spill, prevent the dispenser from sealing correctly, or cause frost and moisture around the dispenser area. Quick Answer WP2305258 is the Genuine Whirlpool OEM ice dispenser chute door. It replaces original part number 2305258 and fits select Whirlpool-built side-by-side refrigerators. Common Problems This Part May Fix Ice falls out of the dispenser unexpectedly Ice chute door will not close fully Door is cracked, warped, or broken Warm air enters through the dispenser opening Frost or moisture forms around the chute Dispenser flap does not seal after dispensing Replaces and Cross-References WP2305258, 1174891, 2305258, AP3854387, AWP885431, AH986856, EAP986856, OEM18021486, PD00004757, PS986856 Cross-reference numbers are supplied for identification. Verify the refrigerator model number before ordering. Compatibility Confirmed applications include select Whirlpool-built side-by-side refrigerators sold under Whirlpool, KitchenAid, JennAir, and Kenmore brands. Examples include: GS6NBEXRY02 KSRS25RVMS05 KSRS25RVMK05 KSCS25FVSS03 KSRT25CRSS00 KSRS25RSMS01 KSCS25FTMK02 KSCS23FVMS01 KSRS25RVMK02 106.54782803 106.57794704 106.57792704 Important: This is only a partial fitment list. Verify the complete model number from the refrigerator data label before purchase. Key Features Genuine Whirlpool OEM replacement part Ice dispenser chute door / flap Helps direct ice into the dispensing chute Closes after dispensing to help seal the opening Direct-fit component for compatible models Product Specifications Manufacturer Part Number WP2305258 Brand Whirlpool Part Type Refrigerator Ice Dispenser Door Chute OEM Status Genuine OEM Appliance Type Refrigerator Condition New Package Quantity 1 Ice Chute Door Installation Notes Disconnect refrigerator power before service. Remove the dispenser trim or front housing according to the model-specific procedure. Photograph the original chute-door position and linkage before removal. Inspect the support bracket, spring, motor/actuator, and seal surfaces for damage. Install the new chute door in the same orientation and confirm free movement. Reassemble the dispenser and confirm the door opens during dispensing and closes completely afterward. Diagnostic tip: If the chute door does not close after replacement, inspect the actuator motor, support bracket, spring, linkage, and dispenser control before replacing additional parts. Frequently Asked Questions Is WP2305258 a Genuine OEM part? Yes. It is a Genuine Whirlpool OEM refrigerator dispenser ice chute door. Does WP2305258 replace 2305258? Yes. WP2305258 is the current replacement for original part number 2305258. What does the ice chute door do? It opens when ice is dispensed and closes afterward to help seal the dispenser opening. Will this fit every Whirlpool refrigerator? No. It fits specific dispenser designs. Confirm the complete refrigerator model number before ordering. Shop With Confidence Verify the refrigerator model before ordering. This listing is for the Genuine Whirlpool OEM WP2305258 ice chute door. Genuine Whirlpool OEMIce Chute DoorCompatibility SupportFast U.S. Shipping

Read more less

WR2X9391 Refrigerator Genuine OEM Light Socket – Compatible with GE, Hotpoint Refrigerators Product Description Illuminate your refrigerator interior with the WR2X9391 Refrigerator Genuine OEM Light Socket. This factory-approved socket provides a secure electrical connection for the interior light bulb, ensuring consistent illumination inside the fridge and freezer compartments. A damaged or faulty socket may cause the light to stop working, flicker, or fail to hold the bulb securely. Replacing it with this genuine OEM part restores reliable lighting and safe appliance operation. Replaces Part Numbers WR2X9391, 2446, SWR2X7270, WR02X0543, WR02X1038, WR02X11990, WR02X1670, WR02X1671, WR02X1846, WR02X2024, WR02X2257, WR02X2258, WR02X2432, WR02X3998, WR02X5691, WR02X5858, WR02X5993, WR02X7270, WR02X8265, WR02X9391, WR2X1038, WR2X1670, WR2X1671, WR2X1846, WR2X2024, WR2X2257, WR2X2258, WR2X2432, WR2X3998, WR2X543, WR2X5691, WR2X5858, WR2X5993, WR2X7270, WR2X8265, AP2060923, AH299782, EA299782, PS299782. Compatibility This genuine OEM light socket is compatible with select GE and Hotpoint refrigerators. Example compatible models include (but are not limited to): GE GTS18FBSARWW, GE TFX22PRDAWW, and Hotpoint HSS25IFMCWW. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Part – Factory-approved light socket for GE and Hotpoint refrigerators 💡 Reliable Lighting – Restores bright, consistent illumination inside your appliance 💰 Cost-Effective Repair – OEM replacement ensures durability and long life 🛠️ Quick DIY Installation – Installs in minutes with simple tools 🛡️ Fixes Common Issues – Solves no-light, flickering, or loose bulb connection problems 📐 Product Specification Part Number: WR2X9391 Component Type: Refrigerator Light Socket Material: High-durability plastic housing with secure electrical contacts Mounting: Direct-fit replacement, screw-in installation Operating Conditions: Designed for refrigerator/freezer compartments Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver ⚠️ Safety First: Always unplug the refrigerator before starting repairs to prevent electrical shock. Steps: Disconnect power and remove the interior light cover. Unscrew or release the old light socket. Detach the wiring harness from the old socket. Connect the harness to the new WR2X9391 socket. Secure socket in place and reinstall light cover. Restore power and test the light. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Bring back bright lighting in your refrigerator — Add to Cart Now for a safe, factory-approved repair!

Read more less

3405-001117 Genuine OEM Refrigerator Dispenser Control Switch - Compatible with Samsung Product Description Restore your refrigerator’s dispenser functionality with the 3405-001117 Genuine OEM Refrigerator Dispenser Control Switch. This Samsung-manufactured microswitch is designed for select Samsung refrigerators, controlling the activation of the water and ice dispenser mechanism. It ensures reliable dispensing, addressing issues like unresponsive or intermittent water/ice dispensing for a seamless user experience. Note: Includes (1) dispenser control microswitch. Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 3405-001117, DA34-00011A, 110634, 3727507, PD00033242, EAP11712663, AP5962465, PS11712663. Compatibility: Compatible with select Samsung refrigerator models, including but not limited to: Samsung: RS2530BBP, RS2530BSH, RS2530BWP, RS2555BB, RS2555SL, RS2555SW, RS2577BB, RS2577SL, RS2577SW, RS2630SH, RS2630WW, RS265LABP, RS265LAWP, RS277ACBP, RS277ACPN, RS277ACWP Common models: Samsung RS253BABB, RS253BAVQ, RS255BABB, RS255BASB, RS257BARB Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung refrigerators with water and ice dispensers. 🔧 Specifications: Genuine OEM Samsung microswitch, single-pole, double-throw (SPDT), 0.1A, 125/250V. 💪 Reliable Performance: Ensures precise activation of the water and ice dispenser mechanism. 🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves unresponsive or intermittent water/ice dispensing issues. Product Specification Part Number: 3405-001117 Component Type: Refrigerator dispenser control switch Material: Durable plastic housing with metal contacts Operating Conditions: 0.1A, 125/250V, suitable for refrigerator dispenser environments Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator’s dispenser working smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE Product Description Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing. Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277. Compatibility: Compatible with models including but not limited to: LG: LSC24971ST/00, LRSC21934SW Kenmore: 79571039010, 79571039011, 79578789801 GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers. 🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals. 💪 Reliable Performance: Ensures precise activation of ice and water dispensing. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues. Product Specification Part Number: XPARTCO 6600JB3001E Component Type: Refrigerator dispenser micro switch Material: Plastic housing, metal contacts Electrical Rating: 16A 1/2HP, 125/250VAC Mounting: Snap-in or screw-mounted, 1/4" terminals Operating Conditions: Suitable for refrigerator dispenser environments Compliance: UL listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO WR07X10097 Refrigerator Compressor Overload Relay – Compatible with GE, Hotpoint, and Kenmore Refrigerators Product Description Restore proper compressor protection and reliable cooling with the XPARTCO WR07X10097 Refrigerator Compressor Overload Relay. This Start Device Assembly is a replacement part for Specific refrigerator models. It is a kit that includes the start relay and overload, both of which are crucial components for the proper operation of the compressor. The start relay is responsible for initiating the compressor's operation by providing an electrical boost to start the motor. The overload, on the other hand, acts as a protective device. It monitors the current flow and protects the compressor from overheating or electrical overload. Replaces Part Numbers WR07X10097, 1265640, AH1766101, EA1766101, PD00008007, EAP1766101, AP4300623, PS1766101. Compatibility This replacement compressor overload relay fits select GE, Hotpoint, and Kenmore refrigerators. Example compatible models include (but are not limited to):GE GTS18HGTHWW, GTS22KGNRWWHotpoint HSS25GFTSAKenmore 363.9557710 Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM electrical protection performance 🔌 Compressor Safety Protection – Prevents overheating and electrical overload damage 🔇 Reduces Clicking Issues – Helps resolve start-up clicking or compressor cycling 💰 Cost-Effective Solution – Reliable alternative to OEM parts 🛡️ Fixes Common Issues – Solves compressor not starting, intermittent cooling, or shutdowns 📐 Product Specification Part Number: WR07X10097 Component Type: Refrigerator Compressor Overload Relay Material: Heat-resistant housing with internal thermal protection Mounting: Direct-fit on compressor terminals Function: Overcurrent and overheat protection Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Unplug the refrigerator before servicing. Compressor components may be hot—allow time to cool. Steps: Disconnect power and remove the rear lower access panel. Locate the overload relay attached to the compressor terminals. Carefully disconnect the old relay. Install the new XPARTCO WR07X10097 overload relay securely. Reinstall the access panel and restore power. Allow several minutes for compressor startup. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your refrigerator compressor and restore reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!

Read more less