8182415 Washer Genuine OEM Drain Pump Fits Specific Whirlpool, Maytag washer Models. Replaces Part Numbers: WP8182415, 8182415, OEM24047170, AP6011792, 1065543, PS11744991. Description: This Drain Pump is a Genuine OEM part for specific Whirlpool, Maytag, Kenmore washing machine models.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WPW10409079 Washer Genuine OEM Drain Pump Replaces Part Number: WPW10409079, W10409079, 2118648, AP6021043, PS11754363, LP09079. Description: This Drain Pump is a replacement part for specific Whirlpool top-loading washing machine models. Located near the bottom center of the machine, it actively pumps water out of the washer tub at the end of each cycle.  The pump motor spins an impeller chamber to push water through the drain hose and out of the home. Causes of failure include clogging from mineral buildup or fabric fibers within the pumping components. Over time, motor windings experience excess heat and may burn out from consistent drainage cycles. WPW10409079 is the part number for a Whirlpool washer drain pump that removes water from the washer during the drain cycle. It is compatible with many Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models.

Read more less

WH10X29537 Front Load Washer Door Fits specific GE Washer models. Description: This Washer Door is a Genuine OEM replacement part for GE washing machines. It is the main access point to the washer drum, allowing you to load and unload your laundry with a secure and tight seal during operation. 

Read more less

DC64-00519D Washer Genuine OEM Door Lock Replaces Part Numbers:  DC64-00519D, 4545806, AP6027082, PS11762120. Description: This Washer Door Lock Switch is an essential component for maintaining the security and functionality of your Samsung washer. Designed to ensure that the washer door remains securely locked during operation, this genuine OEM part guarantees reliable performance and durability. By replacing a faulty or damaged door lock switch with this high-quality assembly, you can restore your washer's ability to operate safely and efficiently.   

Read more less

5221ER1003S Washer Genuine OEM Water Valve Description: This Water Inlet Valve Assembly is an OEM part compatible with specific LG washer models. This assembly controls water intake into the washer tub, allowing for fill levels to be reached on selected cycles. Fits Specific LG washer models Replaces Part Numbers: 5221ER1003S, AP6798394, PS12587936.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

DC31-20014C Washer Genuine OEM Shift Actuator This clutch (part number DC31-20014C) is for washers. Clutch DC31-20014C spins the basket during the spin cycle. Fits specific Samsung washer Models Replaces Part Numbers:DC31-20014C, 2068406, AP4211210, PS4204941.   California Residents only: WARNING: California’s Proposition 65

Read more less

WH13X26637 Washer Genuine OEM Water Valve Replaces Part Numbers: WH13X26637, WH13X24058, AP6282070, PS12171559. Description: This water inlet valve is an OEM replacement part for specific GE washer models. The quad water inlet valve is responsible for controlling the flow of water into the appliance during wash or rinse cycles. The valve is typically located at the back or bottom of the appliance, where the water supply hoses connect. The water inlet valve ensures that the appliance receives the correct amount of water while regulating water pressure. It also prevents water leakage or flooding by closing off the water supply when the appliance is not in use or has reached the appropriate water level.

Read more less

WP3363394 Genuine OEM Washer Drain Pump  Direct Drive Washer Drain Pump for Whirlpool, Kenmore, Roper, Estate, Kirkland, and many more  Replaces Part Number: 3363394, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 62516, 63347, 64076, 8235, AP6008107, PS11741239. This pump fits most direct drive washers. The pump outlet is about 1 1/4". The pump comes fully-boxed, brand new, in its original packaging.    

Read more less

W11168740 - W11168743 Washer Water Valve Set for W11127357 Cold and Hot Washer Water Inlet Valve Housing and Wire Harness not included. Fits Kenmore, Maytag, Whirlpool top load washer models. Replaces Part Number:W11168740, WPW10240949, W10240949, W10921514, AP6285450, PS12348073, W11127357, W11127357, W10678672, W10678676, W10849466, W10921581, W11085642, AP6261887, PS12347475, W11168743, WPW10240948, W10240948, W10921515, AP6327638, PS12348074. Description: This Water Inlet Valve set is a replacement part for specific Kenmore, Maytag, Whirlpool washing machine models. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. Common causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

3355806CM Washer lid Switch 11" harness with round plugs, 7/8" block. Fits specific Whirlpool Laundry Center models. Replaces Part Number: WP3355806, ER3355806, 3355806, AP6008072, PS11741201.  Description: This Lid Switch Kit is a replacement part for specific Maytag, Kenmore, Whirlpool washing machine models. This part is responsible for detecting whether the washing machine lid is closed. If the switch senses the lid is open, it prevents the washer from starting or continuing a cycle, thereby protecting users from potential injury caused by the spinning agitator or drum.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W11399437 Genuine OEM Washer Drain Pump Replaces Part Numbers: AP6974144, PS12731241 Description: This Drain Pump is a Genuine OEM part for select Maytag, Kenmore, Whirlpool washer models. It is responsible for circulating water through the washing machine during all cycles. The pump draws water from the tub and dispenses it through the water supply hoses to soak, scrub, and rinse clothes.  

Read more less

3949247CM Washer Lid Switch with Wires. Replaces Part Numbers: 3949247V, 3949247, 3949237, 3949239, 3949240, 3949247VP, 4248251, TJ90ES247, AP3100003, ES247, AP5983746, PS11722098.    Description: The Washer Lid Switch is a replacement part for specific Whirlpool, Kenmore top load washer models. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle, Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less