WH13X10029CM Washer Water Valve Replaces Part Numbers: WH13X10029, AH1482392, EA1482392, AP4303282, PS1482392. 1 double, 1 single valves on mounting bracket Fits GE front load machines. Description: This 2 in 3 Out Water Valve is a replacement part for select GE washing machine models. It is located within the water supply system to help regulate water flow into the washer tub. Common causes of failure can include obstruction or clogging from mineral deposits over time. Valve components may also wear out with extended usage.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

Choice W10876600 Washer Drain Pump 120V, 60 Hz, 1.2A. Fits Whirlpool VM top load washers. Replaces Part Numbers:W10876600, 4455877, W10727777, W10876600VP, PD00034529, EAP11738156, AP6004933, PS11738156.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W10919003 Washer Genuine OEM Drain Pump Replaces Part Numbers: W10919003, 4461359, W10775446, AP6038235, PS11770076. Description: This Water Pump is a Genuine OEM replacement part for specific Maytag, Kenmore, Whirlpool washing machine models. It plays a crucial role in circulating water throughout the wash cycles and draining the used water from the tub.

Read more less

6601EN1003D Washer Door Lock Interlock Switch Replaces Part Numbers: 6601EN1003D, 6601ER1005A, 2651099, AH3636296, AP5594317, EA3636296, PS3636296.   This is an aftermarket part that can be used as a replacement for the OEM part. WARNING: California’s Proposition 65 (California Residents Only)

Read more less

WH03X36897 Washer Genuine OEM Mode Shifter Actuator – Compatible with GE & Hotpoint Washers Product Description Restore proper wash and spin operation with the WH03X36897 Washer Genuine OEM Mode Shifter Actuator. This factory-approved component shifts the washer between agitation and spin modes during the wash cycle. A failing mode shifter can cause the washer to agitate but not spin, spin improperly, make clicking noises, or display cycle errors. Replacing it with this Genuine OEM actuator ensures precise shifting, reliable performance, and correct cycle operation. Replaces Part Numbers WH03X36897, WH18X27186, AP7225424, PD00087767, EAP17626543, PS17626543 Compatibility This Genuine OEM mode shifter actuator fits select GE and Hotpoint top-load washers. Example compatible models include (but are not limited to):GE GTW335ASN1WW, GTW465ASN2WW, GTW485ASJ1WSHotpoint HTW240ASK6WS Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and dependable operation 🔄 Accurate Mode Shifting – Properly switches between wash and spin cycles 🔇 Quiet, Smooth Operation – Reduces clicking or erratic shifting noises 💪 OEM-Grade Durability – Designed for long service life under repeated cycles 🛡️ Fixes Common Issues – Solves no-spin, improper agitation, or cycle errors 📐 Product Specification Part Number: WH03X36897 Component Type: Washer Mode Shifter Actuator Voltage: 120V AC Mounting: Direct-fit installation on transmission assembly Function: Controls agitation-to-spin shifting Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock. Steps: Disconnect power and tilt the washer back for bottom access. Locate the mode shifter actuator near the transmission. Disconnect the wiring harness and remove mounting screws. Install the new WH03X36897 actuator and secure it in place. Reconnect wiring, return washer upright, and restore power. Run a test cycle to confirm proper shifting. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore correct washer cycle operation — Add to Cart Now for a factory-quality repair!

Read more less

W11038689 Washer Genuine OEM Water Inlet Valve – Compatible with Whirlpool, Maytag, Amana, and Kenmore Washers Product Description Restore proper water flow and reliable washer operation with the W11038689 Washer Genuine OEM Water Inlet Valve. This factory-approved valve precisely controls hot and cold water entering the washer during fill cycles. A faulty inlet valve may cause slow filling, no water flow, incorrect water temperature, or fill-related error codes. Installing this Genuine OEM part ensures exact fit, correct water pressure, and long-lasting performance. Replaces Part Numbers W11038689, 4455378, W10776841, W10869800, W11024486, PD00033551, EAP11773194, AP6039690, PS11773194. Compatibility This Genuine OEM water inlet valve fits select Whirlpool, Maytag, Amana, Crosley, and Kenmore top-load washers. Example compatible models include (but are not limited to):Whirlpool WTW5000DW1, WTW5057LW0Maytag MVW6230HW0Amana NTW4516FW3Kenmore 110.25132411 Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and dependable operation 💧 Accurate Water Control – Regulates hot and cold water for proper wash performance 🔧 Durable Solenoid Design – Built for consistent flow under repeated cycles 🛠️ Direct-Fit Installation – No modifications required 🛡️ Fixes Common Issues – Resolves slow fill, no fill, temperature errors, or wash interruptions 📐 Product Specification Part Number: W11038689 Component Type: Washer Water Inlet Valve Assembly Material: OEM-grade reinforced plastic with metal solenoids Ports: Dual hot and cold water inlets Mounting: Rear washer panel, direct-fit Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, towel or bucket ⚠️ Safety First: Unplug the washer and shut off the water supply before starting installation. Steps: Turn off water supply and disconnect inlet hoses. Remove the washer’s rear access panel. Disconnect wiring harness and internal hoses from the old valve. Install the new W11038689 valve and secure it in place. Reconnect wiring and hoses, then reinstall the panel. Restore water and power, and run a fill test. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore proper washer filling with confidence — Add to Cart Now for a factory-quality repair!

Read more less

W11513248 Washer Genuine OEM Lid Lock Assembly – Compatible with Whirlpool, Maytag, Amana, and Kenmore Washers Product Description Ensure safe and reliable washer operation with the W11513248 Washer Genuine OEM Lid Lock Assembly. This Lid Lock Assembly is a Genuine OEM part compatible with specific Whirlpool washing machines. This part is responsible for locking the lid of the washing machine during operation. This prevents it from opening while the machine is running.  When a lid lock assembly fails or becomes damaged, it can cause a variety of issues with the washer. The most common symptom of a bad lid lock in a washer is that it will not start when the lid is closed. Other symptoms include an inability to select certain cycles, or an error code being displayed on the control panel. In some cases, the washer may even fill with water but not start agitating or spinning. Replaces Part Numbers W11513248, W11414731, 4964074, DTL60003, DTL6000, PD00073744, EAP16543458, AP7002928, PS16543458. Compatibility This Genuine OEM lid lock assembly fits select Whirlpool, Maytag, Amana, Kenmore, and Crosley top-load washers. Example compatible models include (but are not limited to):Whirlpool WTW4816FW2, Maytag MVWC565FW1, Kenmore 110.22352510, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and reliable operation 🚪 Restores Lid-Safety Function – Ensures washer can lock and run cycles safely 🔒 Enhanced Safety Design – Prevents spin operation when lid is open 🛠️ Plug-and-Play Installation – Includes pre-wired harness for simple setup 🛡️ Fixes Common Issues – Solves washer not starting, lid lock errors, or cycle interruptions 📐 Product Specification Part Number: W11513248 Component Type: Washer Lid Lock / Switch Assembly Material: OEM-grade plastic housing with integrated wiring harness Mounting: Direct-fit installation beneath top washer panel Operating Environment: Moisture-resistant and vibration-stable Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock. Steps: Disconnect power and open the top panel. Remove screws securing the old lid lock assembly. Disconnect the wiring harness. Install the new W11513248 lid lock in the same position. Reconnect wiring, secure the switch, and close the panel. Restore power and test washer operation. ⏱️ Time Required: 10–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Keep your washer safe and running smoothly — Add to Cart Now for a factory-quality repair!

Read more less

W10876600 Washer Genuine OEM Drain Pump – Compatible with Whirlpool, Maytag, Amana, and Crosley Washers Product Description Quickly and efficiently remove water from your washer with the W10876600 Washer Genuine OEM Drain Pump. This factory-approved replacement pump removes water from the tub during wash and spin cycles, ensuring smooth performance and proper draining. A faulty drain pump can cause standing water, error codes, or incomplete cycles. Replacing it with this Genuine OEM part restores dependable drainage and long-lasting washer performance. Replaces Part Numbers W10876600, 4455877, W10727777, W10876600VP, PD00034529, EAP11738156, AP6004933, PS11738156. Compatibility This Genuine OEM drain pump fits select Whirlpool, Maytag, Amana, and Crosley top-load and front-load washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWC465HW0, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved for perfect fit and reliable operation 💧 Efficient Water Removal – Quickly drains water from the washer tub after each cycle 💪 Durable Motor Design – Built to withstand repeated use and heavy loads 🛠️ DIY Installation – Direct-fit replacement installs easily with basic tools 🛡️ Fixes Common Issues – Solves washer not draining, standing water, or “F9E1”/“SD” error codes 📐 Product Specification Part Number: W10876600 Component Type: Washer Drain Pump Assembly Material: Heavy-duty plastic pump housing and electric motor Voltage: 120V AC Mounting: Direct-fit on washer base with wiring harness connection Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Nut driver, pliers, towel or bucket ⚠️ Safety First: Always unplug the washer and disconnect water supply before performing repairs to prevent electrical shock or leaks. Steps: Disconnect power and water hoses. Tilt the washer back or remove the front access panel. Unplug the wiring harness and loosen the clamps on the drain hoses. Remove the old pump and install the new W10876600 pump. Reconnect hoses and wiring, secure the pump, and restore power. Run a rinse or drain cycle to verify proper operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Fix washer drainage issues fast — Add to Cart Now for a factory-quality repair that lasts!

Read more less

W11220230 Washer Genuine OEM Water Valve – Compatible with Whirlpool, Maytag, Amana, Crosley, Roper Washers Product Description Keep your washer filling properly with the W11220230 Washer Genuine OEM Water Valve. This factory-approved valve regulates hot and cold water flow into the tub during wash cycles. A faulty valve can cause filling issues, leaks, or error codes. Replacing it with this genuine OEM part ensures dependable performance and efficient cleaning. Replaces Part Numbers W11220230, W10853296, 4591408, W10632527, W10758829, W11096268, PD00042661, EAP12349461, AP6329544, PS12349461. Compatibility This water valve is compatible with select Whirlpool, Maytag, Amana, Crosley, and Roper washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW3, Maytag MVWC465HW2, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Part – Designed for Whirlpool, Maytag, Amana, Crosley, and Roper washers 💧 Reliable Water Control – Ensures accurate water flow and filling cycles 💰 Cost-Effective OEM Repair – Long-lasting factory-tested replacement 🛠️ DIY Friendly – Installs in 20–30 minutes with basic tools 🛡️ Fixes Common Issues – Resolves filling problems, leaks, and error codes 📐 Product Specification Part Number: W11220230 Component Type: Washer Water Inlet Valve Material: Reinforced plastic body with solenoid valves Mounting: Direct-fit replacement Operating Conditions: Designed for residential washer use Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, adjustable wrench ⚠️ Safety First: Unplug washer and turn off water supply before beginning repairs. Steps: Disconnect washer from power and water supply. Remove back panel to access the water valve. Disconnect hoses and wiring harness from the old valve. Unscrew and remove the defective valve. Install the new W11220230 valve, reconnect hoses and wiring. Reassemble panel, restore water and power, and run a test cycle. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix washer filling issues today — Add to Cart Now for a safe, factory-approved repair!

Read more less

XPARTCO W11458345 Washer Drain Pump - Compatible with Whirlpool, Maytag, Amana Product Description Restore your washer’s drainage with the XPARTCO W11458345 Washer Drain Pump. This replacement drain pump is designed as a replacement for select Whirlpool, Maytag, Amana, and other compatible washing machines, offering a cost-effective alternative to the original. It efficiently drains wastewater during wash cycles and includes a large filter that can be cleaned monthly with Washing Machine Cleaner Tablets. This part addresses issues like water not draining, loud buzzing or grinding noises, or failure to enter agitation cycles, often caused by blockages, wear, or pump motor failure. Note: Includes (1) drain pump assembly. Disconnect power before installation. Verify compatibility with your washer model. Replaces part numbers: W11458345, W11316609, W11319789, W10918608, PD00062450, EAP16218041, AP6989186, PS16218041. Compatibility: Compatible with select washer models, including but not limited to: Whirlpool: WFW862CHC3, WFW6620HW1, WFW6620HW2, WFW9620HC2, 8TWFW8620HW1 Maytag: MHW5630HW1, MHW5630HW3, 7MWFW5622HW2 Amana: NFW5800HW0 Kenmore: 110.42932200 Inglis: IFW5900HW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, Inglis, and Kenmore washers. 🔧 Specifications: Replacement drain pump, 120V, stainless steel construction. 💪 Reliable Performance: Efficiently drains wastewater for optimal washer operation. 🛠️ Easy Installation: Requires screwdriver, pliers, and nut driver; typically installed in 30–60 minutes. 🛡️ Effective Fixes: Resolves water not draining, buzzing/grinding noises, or agitation cycle issues. Product Specification Part Number: XPARTCO W11458345 Component Type: Washer drain pump assembly Material: Stainless steel and plastic Electrical Specs: 120V, submersible design Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

WH23X28418 Washer Drain Pump - Genuine OEM for GE, Hotpoint Product Description Ensure your washer drains efficiently with the WH23X28418 Washer Drain Pump. This genuine OEM part, manufactured by GE, is designed as a replacement for select GE, Hotpoint, and RCA front-load washing machines. It effectively removes water and soap from the washer during the drain cycle, maintaining optimal performance. This part addresses issues like water remaining in the drum, noisy operation, failure to drain, or leaks, often caused by a clogged, damaged, or failed drain pump. Note: Includes (1) drain pump and motor with harness and drain seal. Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: WH23X24178, WH23X28418, WH23X27574, 290D1201G001, 290D1201G002, 290D1201G003, B40-3A01, B30-3A02, PD00055680, EAP12723115, AP6889136, PS12723115. Compatibility: Compatible with select washer models, including but not limited to: GE: GTW485ASJ3WS, GTW485ASJ4WS, GTW485ASJ5WS, GTW490ACJ, GTW500ASN0WS, GTW680BPL0DG, GTW680BPL1DG, GTW720BPN0DG, GTW725BPN0DG, GTW465ASN1WW Hotpoint: HTW240ASK0WS, HTW240ASK2WS, HTW240ASK4WS RCA: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and RCA front-load washers. 🔧 Specifications: 120V, 60Hz, 1.25A, plastic and metal construction, includes pump, motor, harness, and drain seal. 💪 Reliable Performance: Ensures efficient water and soap removal for consistent drainage. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves water remaining in drum, noisy operation, failure to drain, or leaks. Product Specification Part Number: WH23X28418 Component Type: Washer drain pump Material: Plastic and metal (Based on web:8, web:19) Electrical Specs: 120V, 60Hz, 1.25A, CL.A Run Time: 10 min ON / 50 min OFF Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

W11670519 Washer Lid Lock - Compatible with Whirlpool, Maytag, Amana, Kenmore Product Description Restore your washer’s safety and performance with the W11670519 Lid Lock from Parts-O-Matic. This genuine OEM replacement lid lock secures the washer lid during wash and spin cycles, ensuring safe operation. Designed for Whirlpool, Maytag, Amana, and Kenmore top-load washers, it fixes issues like washer not starting, stopping mid-cycle, or error codes. Note: Includes one lid lock assembly.  Replaces part numbers: W11670519, W11368616, EAP17215992, PD00085482, AP7214714, PS17215992. Compatibility: Compatible with models including but not limited to: Whirlpool: WTW5100HC0, WTW5105HW0, WTW6120HC0, WTW8120HC0 Maytag: MVW6230HW0, MVW7230HC0, MVW7232HW0 Amana: NTW4519JW0 Kenmore: 110.21652020 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, Maytag, Amana, and Kenmore top-load washer models. 🔒 Specifications: OEM lid lock assembly and electrical connectors for reliable safety. 💰 Cost-Effective: OEM performance at a competitive price. 🛠️ Easy Installation: Requires a screwdriver, work gloves; typically installed in 15–30 minutes. 🛡️ Reliable Fixes: Resolves washer not starting, stopping mid-cycle, or error codes. Installation Notes: Safety First: Unplug the washer before installation to avoid electrical shock. Access the lid lock (under top or control panel), disconnect wiring, remove the old lock, install the new lock, and reconnect. Run a diagnostic cycle post-installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a budget-friendly fix!

Read more less