ERP W10820048 Washer Suspension Rod Kit Features:  Shock absorbing suspension rod supports the tub and keeps it stable.     Used on top loading washers.     For even wear, the manufacturer recommends replacing all damper rods on your unit at the same time.     Includes (4) Suspension Rod Assemblies, (4) Ball Cups, (4) Bushings. Replace Part Numbers:W10820048, W10189077, 280144, 4283301, 8564009, 8566146, OEM17955344, AP5985113, PS11723157, W10820048VP. Description: This suspension rod kit is a replacement part for use in washing machines. The kit reduces the movement of the tub during the spinning cycle. These rods provide a cushion to the drum to prevent excessive vibrating. Over time, the tension placed on the rods will cause them to stretch and possibly break. Broken or stretched rods will cause the machine to make a loud knocking noise during the spin cycle. This noise is the tub hitting the drum as it spins since there is not a cushion to prevent the banging. The drum of the washing machine will also look unbalanced if a rod is broken or stretched. Unplug the washing machine from the electrical outlet and pull it away from the wall to have room to work. Remove the front and top panels and locate the tension rod. Lift the tub to remove the tension from the damaged rod and remove the connection to the rod. Pull the damaged rod out and install the new rod assembly. Reassemble the washing machine. Plug the machine back into the electrical outlet and push the machine back into place. This suspension kit contains four each suspension rods, bushings, and suspension balls. It is designed for use in washing machines manufactured by Kenmore, Whirlpool, and Maytag.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov  

Read more less

ERP 383EER3001V Washer Shock Absorber Replaces Part Numbers:383EER3001V, 1578672, AH3522317, AP5201523, EA3522317, PS3522317   This is an aftermarket part that can be used as a replacement for the OEM part.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP DC97-15459D Washer Water Valve Replaces Part Numbers:DC97-15459D, AP5325836, 2886266, PS4220860.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WP21366 Genuine Whirlpool OEM Washer Spanner Nut Replaces Part Numbers: WP21366, 21366, 16060, LP331, AP6005824, PS11738884.

Read more less

ERP 134371220 Washer Water Valve Replaces Part Numbers: 134371220, WH13X10030, 1154728, AH1145692, EA1145692, OEM11533292, AP3844429, PS1145692. Description: This Water Inlet Valve is a replacement part for specific Frigidaire washing machine models. This part controls the flow of hot and cold water into the washer's tub, ensuring the correct temperature mix for various wash cycles. By opening and closing at the command of the washer's control system, it plays a pivotal role in the machine's ability to execute programmed wash cycles with precision, affecting everything from the initial fill to the rinse phases. Causes for the replacement of the water inlet valve can range from mineral deposits and sediment build-up, which can obstruct the valve's flow, to mechanical wear and electrical failures affecting the valve's operation.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less