XPARTCO 3949238 Washer Lid Switch Replaces WP3949238
The XPARTCO 3949238 is an aftermarket replacement lid switch assembly for Whirlpool top-load washers, and also fits select Kenmore models. This switch confirms the lid is closed before the washer will spin — a pin on the underside of the lid pushes against the switch's lever, telling the machine it's safe to proceed with the cycle.
Includes a 3-wire lead and a metal shield for added durability. Over time, the switch's internal contacts can wear out or fail electrically. If your washer will agitate but won't spin, this switch is a strong candidate for the cause. Symptoms of a failing lid switch include the washer not spinning, not draining, not starting, not agitating, the cycle failing to advance, or the lid not closing properly. It directly replaces WP3949238, 3949238, WP3949238VP, 10800-61, AP6008880, AWP47911, EAP11742021, OEM18026649, PD00002488, PS11742021.
Quick Answer
The XPARTCO 3949238 Washer Lid Switch fixes Whirlpool and Kenmore top-load washers that won't spin, won't drain, won't start, won't agitate, won't advance through the cycle, or have a lid that won't close properly. Includes 3-wire lead, metal shield. Replaces WP3949238, 3949238, WP3949238VP, 10800-61, AP6008880, AWP47911, EAP11742021, OEM18026649, PD00002488, PS11742021. If your washer agitates fine but won't spin, that's the classic symptom pointing to this switch.
Common Problems This Part Fixes
Washer not spinning
Washer not draining
Washer not starting
Washer not agitating
Cycle not advancing
Lid or door won't close properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer lid switch directly replaces the following OEM and cross-reference part numbers:
WP3949238, 3949238, WP3949238VP, 10800-61, AP6008880, AWP47911, EAP11742021, OEM18026649, PD00002488, PS11742021
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lid switch is compatible with select Whirlpool top-load washers, and also fits select Kenmore washers built on the Whirlpool platform, including model numbers such as 11015732400, 11015842400, 11015852400, 11020692000, 11020602992, 11020612990, 11020612991, 11020622990, 11020622991, 11020632990, 11020632991, 11020642990, 11020642991, 11021894000, 11022292100, 11022294100, 11022422100, 11022432100, 11022442100, 11022622100, 11022632100, 11022642100, 11022652100, 11022662100, 11022692100, 11022692101, 11022702100, 11022702101, 11022712100, 11022722100, and 11022722101.
Note — not the same as 3949247: A similarly-numbered switch, 3949247, is a separate part used on different models. Whirlpool also uses several other distinct lid switch designs, including the direct-drive style (8318084) and the thin-twin style (3355806), which are not interchangeable with this switch. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which switch your washer needs.
Key Features
Aftermarket replacement lid switch assembly — confirms the lid is closed before allowing the washer to spin
Resolves "won't spin," "won't drain," "won't start," "won't agitate," "cycle not advancing," and "lid won't close" symptoms
3-wire lead with metal shield for added durability
Direct drop-in replacement matching the original mounting and connection
Replaces WP3949238, 3949238, WP3949238VP, 10800-61, AP6008880, AWP47911, EAP11742021, OEM18026649, PD00002488, PS11742021
Compatible with Whirlpool and Kenmore top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Requires basic hand tools, some disassembly, novice repair experience
Product Specifications
Part Number
3949238
OEM Part Number
WP3949238
Part Type
Washer Lid Switch Assembly
Condition
Aftermarket Replacement
Wiring
3-wire lead
Shield
Metal
Function
Confirms lid is closed before allowing the washer to spin
Repair Difficulty
Easy — basic hand tools, novice repair experience
Quantity
1 lid switch assembly
Compatible Brands
Whirlpool, Kenmore
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting Unplug your washer and turn off the water supply before you begin — make sure both the hot and cold water supplies are shut off. Remove the screws located on the back of the washer cabinet, usually located at the top of the access panel. Lift or tilt the top of the washer to access the lid switch, typically mounted near the lid opening. Photograph the wiring before disconnecting anything. Disconnect the wire connectors from the old switch and remove the mounting screws securing it in place. Install the new 3949238 in the same position, reconnect the wire connectors fully, and secure the mounting screws. Reassemble the washer cabinet and secure its screws. Restore power and water, then run a test cycle with the lid closed to confirm the washer spins normally. Tools needed: multi screwdriver.
Frequently Asked Questions
My washer agitates but won't spin. Is this the part I need?
Yes, this is the classic and most reliable symptom of a failed lid switch. This switch confirms to the washer's control system that the lid is closed before allowing the spin cycle to run — a failed switch commonly still allows agitation while preventing spin, since spin specifically requires the lid-closed signal.
Is this the same as the 3949247 switch I've seen listed nearby?
No, these are separate lid switch part numbers, despite the similar numbering. 3949247 is used on different models. Always confirm your exact part number from your washer's parts diagram or the sticker on your old switch before ordering.
Is this a difficult repair?
No, this is a straightforward repair requiring basic hand tools and some cabinet disassembly, suitable for a novice DIYer. A multi screwdriver is typically all that's needed.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the wiring, mounting, and switching function of the original WP3949238 lid switch assembly used in compatible Whirlpool and Kenmore top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Read more less
