XPARTCO 5304511738 Refrigerator LED Light Bulb
The XPARTCO 5304511738 is an aftermarket replacement LED refrigerator light bulb compatible with select Frigidaire, Electrolux, Kenmore, and Crosley refrigerators in the FFSS, LFSS, CRSE, FFHX, and related series. This LED bulb mounts inside the refrigerator or freezer cabinet and provides interior lighting when the door is opened. The 5304511738 uses a standard E26/E27 screw base and is rated at 3.5W, 120V, producing bright white light from 24 individual LED elements. It replaces the older-style incandescent refrigerator bulb with a longer-life, lower-energy LED equivalent that generates less heat inside the refrigerator cabinet.
The bulb features a wide voltage design rated 85V–265V, making it compatible with both standard 110V and 220V electrical systems. It directly replaces PS12364857, AP6278388, 4584444, PS11767930, RLB11738, KEI D34L, KEID34L, KEL3418L, and the associated cross-reference numbers. Sold individually. Installs in under 2 minutes — unscrew the old bulb and screw in the new one.
Quick Answer
The XPARTCO 5304511738 Refrigerator LED Light Bulb replaces a burned out, dim, or flickering interior light in compatible Frigidaire, Electrolux, Kenmore, and Crosley refrigerators. 3.5W, E26/E27 base, 85V–265V, white light, 24 LEDs. Compatible with Frigidaire FFSS, LFSS, CRSE, FFHX series and related models. Replaces PS12364857, AP6278388, 4584444, KEI D34L, KEID34L, KEL3418L, RLB11738. Sold individually. Screws in — no tools required.
Common Problems This Part Fixes
Refrigerator interior light not working — bulb burned out
Refrigerator light dim or flickering — bulb nearing end of life
Refrigerator light on but very low brightness — LED elements failing
Original incandescent bulb generating too much heat inside the cabinet
Upgrading from incandescent to longer-life LED for energy savings
Replaces Part Numbers
This LED light bulb directly replaces the following OEM and cross-reference part numbers:
5304511738, 241560701, KEI D34L, KEID34L, KEL 3418L, KEL3418L, RLB11738, AFR17812, AP6278388, EAP12364857, PD00045325, PS12364857.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This LED light bulb is compatible with select refrigerators from the following brands and series:
Frigidaire refrigerators — FFSS2315, FFSS2615, FFSS2625, LFSS2312, LFSS2612, CRSE233, CRSE263, FFHX2325, FFHT1821 and related series
Electrolux refrigerators (select models using the same E26/E27 socket)
Kenmore / Sears refrigerators (select Frigidaire/Electrolux-built models)
Crosley refrigerators (select models)
Note: Before ordering, verify that your refrigerator uses a standard screw-base (E26/E27) bulb socket. Some newer refrigerators use proprietary LED modules or LED assemblies that are not interchangeable with standard screw-base bulbs. Always verify your model number before purchasing.
Key Features
LED replacement for the standard refrigerator interior light — longer lifespan and lower energy use than incandescent equivalents
3.5W power consumption — significantly more energy-efficient than the original 25W–40W incandescent bulb
24 individual LED elements — bright, even, shadow-free white light illumination inside the cabinet
E26/E27 universal screw base — fits the standard refrigerator bulb socket directly
Wide voltage design: 85V–265V — compatible with standard 110V household current
Less heat generated inside the refrigerator compared to incandescent bulbs — helps maintain consistent internal temperature
Replaces PS12364857, AP6278388, 4584444, KEI D34L, KEID34L, KEL3418L, and RLB11738
Sold individually — order 2 if your refrigerator has two light sockets
Aftermarket replacement built to OEM-equivalent quality standards
Installs in under 2 minutes — no tools required
Product Specifications
Part Number
5304511738
Part Type
Refrigerator LED Interior Light Bulb
Condition
Aftermarket Replacement
Wattage
3.5W
Voltage
85V–265V (wide voltage / 120V standard US)
Amperage
0.038A (at 120V)
LED Count
24 LEDs
Light Color
White
Base Type
E26/E27 screw base (universal)
Sold As
Single bulb
Installation
Screw-in — no tools required
Compatible Brands
Frigidaire, Electrolux, Kenmore, Crosley
Installation Notes
⚠️ Unplug Refrigerator Before Replacing the Bulb Unplug the refrigerator before replacing the bulb to avoid electric shock. Open the refrigerator door and locate the light bulb socket — it is typically behind a plastic light cover or lens on the interior ceiling or side wall of the fresh food section. Remove the plastic light cover if present (it usually snaps off or slides forward). Turn the old bulb counter-clockwise to unscrew and remove it. Screw the new 5304511738 LED bulb in clockwise until snug — do not overtighten. Replace the light cover, restore power, and open the door to confirm the light works.
Frequently Asked Questions
Will this LED bulb work as a direct replacement for the original incandescent bulb?
Yes — the 5304511738 LED bulb uses the same E26/E27 screw base as the original incandescent refrigerator bulb and draws from the same 120V socket. It screws in exactly like the original and produces bright white light. The LED version uses only 3.5W compared to the typical 25W–40W of an incandescent refrigerator bulb, which means lower energy use and significantly less heat generated inside the refrigerator cabinet — both of which are improvements over the original.
My refrigerator has two light sockets — do I need two bulbs?
Yes — if your refrigerator has two light sockets (one for the fresh food section and one for the freezer, or two in the fresh food section), you will need two bulbs. This listing is for a single bulb. Order two to replace both sockets at the same time — replacing both ensures even light output and prevents being left without light shortly after when the second older bulb burns out.
What are the KEI D34L, KEID34L, and KEL3418L designations?
KEI D34L, KEID34L, and KEL3418L are model designations printed on the original Frigidaire refrigerator LED bulb or its housing — they are not traditional part numbers but are used by some parts databases as cross-references for the 5304511738. If you see any of these designations on your old bulb or in your refrigerator's parts list, the 5304511738 is the correct replacement.
My refrigerator light doesn't work but the new bulb also doesn't light up — what else could it be?
If the new bulb does not light up after installation, the bulb is likely not the cause of the problem. Other possible causes include a failed door switch (the switch that tells the refrigerator the door is open and turns on the light), a wiring issue in the light circuit, or a failed control board relay that supplies power to the light socket. Test the door switch by pressing and releasing it manually — if the light activates when you press it and turns off when you release it, the switch is working and the issue is elsewhere in the circuit.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM part, but is manufactured with 24 LED elements in an E26/E27 base to match the light output and fit of the original 5304511738 refrigerator LED bulb.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set - Compatible with Whirlpool, Kenmore, Maytag
Product Description
Maintain safe and efficient dryer operation with the XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set. This replacement kit includes one cycling thermostat (3387134, L155-25) and one thermal fuse (3392519), designed as a replacement for select Whirlpool, Kenmore, Maytag, and other compatible dryers. The cycling thermostat regulates drum temperature, while the thermal fuse prevents overheating by cutting power if temperatures exceed safe limits. This set addresses issues like overheating, insufficient heat, no heat, or prolonged drying times. Test the thermal fuse first if the dryer won't heat, as it typically fails before the thermostat.
Note: Includes (1) cycling thermostat and (1) thermal fuse. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers:
Cycling Thermostat: WP3387134, 3387134, 3387135, 3387139, 3-6910, 306910, 326801, 661512, L150-15F, L155-25F, AP6008270, PS11741405.
Thermal Fuse: 3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101091C, ET401, 3388651, 694511, 80005, PS11741460, AP6008325.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: LE5700XKW0, LE5920XKW0, WED4815EW1, WED4910XQ1, WED5300SQ0
Kenmore: 110.97591420, 110.97591220, 110.97592420, 110.60072990
Maytag: MDE5500AYW, MDE6000AYW, MDE7600AYW
Roper: RED4440VQ1, REX5634KQ1
Amana: NED4655EW0
KitchenAid: KEYE760WWH0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Roper, Amana, KitchenAid, and other dryers.
🔧 Specifications: Replacement kit with one cycling thermostat (L155-25 SPST, 120V, 2W) and one thermal fuse (250°F limit, non-resettable).
💪 Reliable Performance: Regulates drum temperature and prevents overheating for safe, efficient drying.
🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves overheating, insufficient heat, no heat, or prolonged drying times.
Product Specification
Part Number: XPARTCO 3387134 - 3392519
Component Type: Dryer cycling thermostat and thermal fuse kit
Material: Plastic and metal
Electrical Specs:
Cycling Thermostat: 120V, 2W; L155-25 SPST, opens at 155°F, closes at 130°F
Thermal Fuse: 250°F limit, 125/250V, non-resettable
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running safely and efficiently today!
Add to cart now for a reliable fix!
8558953 Dishwasher Touchpad and Control Panel
Genuine OEM
Fits Specific Kenmore Dishwasher Models
Replaces Part Numbers: WP8558953, 8558953, 1066185, 8558928, 8563373, AP6013229, PS11746451.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W10482836 Washer Lid Lock & Latch Assembly
The XPARTCO W10482836 is an aftermarket replacement lid lock and latch assembly for select Whirlpool and Maytag washers, replacing Whirlpool parts W10482836 and WPW10482836. The latch keeps the washer lid closed during operation. If the lid is not latched, the washer's door switch prevents the washer from running, so a defective latch can stop the washer from starting or spinning.
The assembly includes the latch mechanism and the connecting wire to the washer's electrical system. Check your model number before ordering.
Quick Answer
The XPARTCO W10482836 Lid Lock & Latch Assembly replaces the lid latch on a compatible Whirlpool or Maytag washer when it no longer locks or latches. Replaces W10482836 and WPW10482836. Classic symptoms: the washer won't start, the lid won't lock or unlock, or the washer won't spin.
Common Problems This Part Fixes
Washer won't start
Lid won't lock or unlock, or won't stay closed
Washer won't spin or agitate
Washer stops mid-cycle
Damaged lid latch
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This lid lock and latch assembly directly replaces the following part numbers:
WPW10482836, W10482836, 3020730, AP6022148, AWP50516, EAP11755478, PD00022780, PS11755478
Whirlpool uses different lid latch numbers for different washers (for example W10404050), and they are not interchangeable by number alone. If your old latch shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This lid lock and latch assembly is listed for Whirlpool and Maytag washers, including these examples:
Maytag MVW18MNBWW0, MVW18CSBWW0, MVW18PDAWW0, MAT20PDAXW0
Maytag MVWP575GW0, MVWP576KW0
Whirlpool CAE2743BQ0, CAE2793BQ0, QCAE2733BQ0, QCAE2735FQ0
Note: The models above are a small sample, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the Whirlpool W10482836 lid lock and latch
Includes the latch mechanism and connecting wire
Keeps the lid locked from the start of the cycle until it finishes
Replaces WPW10482836
Product Specifications
Part Number
XPW10482836
OEM Part Number
WPW10482836
Part Type
Washer Lid Lock & Latch Assembly
Condition
Aftermarket Replacement
Includes
Latch Mechanism and Connecting Wire
Quantity
1 Assembly
Application
Select Whirlpool and Maytag Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before you begin. Remove the top panel or access cover per your model's service guide, note how the wire connector attaches, and unscrew and remove the old latch. Position and secure the new latch, reconnect the wire, and refit the panel. Restore power and test that the lid locks and the washer starts. If the washer still won't run, test the latch switches for continuity against your wiring diagram.
Frequently Asked Questions
My washer won't start or the lid won't lock. Is this the part I need?
It can be. Inspect the latch for damage first. If the latch looks fine, test its switches for continuity against your wiring diagram. Other parts, such as the control board, can cause the same symptoms.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace Whirlpool parts W10482836 and WPW10482836. If you specifically need a genuine Whirlpool part, contact our support team.
Is this the same as other Whirlpool lid latch assemblies?
Not necessarily. Whirlpool uses different lid latch numbers for different washers. Match the part number and your model number, or contact our support team and we'll check for you.
Will this fit my washer?
It is listed for select Whirlpool and Maytag models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 3387134 Dryer Cycling Thermostat
The XPARTCO 3387134 is an aftermarket replacement dryer cycling thermostat, the operating thermostat that controls drying temperature. It switches the heating element off when the dryer reaches its set temperature and back on after it cools, keeping the inside of the dryer at a steady temperature throughout the cycle. This one is rated L155-25: it cuts out at approximately 155°F and cycles back on once the temperature drops about 25°F.
When a cycling thermostat fails, the dryer may stop heating, run too hot, or keep heating after the drum has stopped. This is a direct-fit aftermarket replacement for the original Whirlpool WP3387134, and it fits a wide range of Whirlpool-built dryers sold under the Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Crosley, Estate, Amana, and other brand names.
Quick Answer
The XPARTCO 3387134 Cycling Thermostat fixes a Whirlpool-built dryer that isn't heating, runs too hot, or has inconsistent drying temperatures. Rated L155-25, it cycles the heating element off at about 155°F and back on after a 25°F drop. Classic symptom: clothes come out damp or the dryer runs excessively hot, with no sign of a clogged vent.
Common Problems This Part Fixes
Dryer not heating
Dryer running too hot
Inconsistent drying temperatures
Heat staying on after the drum has stopped
Dryer won't start or the timer doesn't advance, if the thermostat has failed
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This cycling thermostat directly replaces the following part numbers:
3387134, WP3387134, 3387135, 3387139, 306910, 3-6910, 2011
These numbers span several generations of Whirlpool's own part numbering for this thermostat as model lines were updated. All are the correct replacement regardless of which number appears on your dryer's parts diagram.
Compatibility
This thermostat fits a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Crosley, Estate, Amana and related dryers, including these examples:
Kenmore 11060012000, 11060012001, 11060022010, 11060172000, 11060232000, 11060602990
Numerous additional Whirlpool-built dryer models
Note: This is the cycling (operating) thermostat, not the high limit thermostat or the thermal fuse, which are separate safety parts. The models above are a sample, not a full list. Confirm your model number against your dryer's parts diagram, or contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket cycling thermostat for Whirlpool-built dryers
Rated L155-25: cuts out at about 155°F and cycles back on after a 25°F drop
Keeps dryer temperature steady by cycling the heating element on and off
Resolves no-heat, overheating, and inconsistent-temperature symptoms
Fits Whirlpool, Kenmore, Maytag, KitchenAid, and other Whirlpool-built dryers
Medium-difficulty repair with basic hand tools
Product Specifications
Part Number
XP3387134
OEM Part Number
3387134, WP3387134
Part Type
Dryer Cycling Thermostat
Condition
Aftermarket Replacement
Temperature Rating
L155-25 (Cuts Out ~155°F, 25°F Differential)
Application
Whirlpool, Kenmore, Maytag, KitchenAid & Related Dryers
Installation Notes
⚠️ Unplug Power Before Installing
Unplug the dryer or switch off its circuit breaker before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. Remove the panel that gives access to the heater housing per your model's service guide, note the wire terminal positions, and disconnect them from the old thermostat. Remove the thermostat, install the new one in the same position, and reconnect the wires. A screwdriver and needle-nose pliers are typically all you need. Before closing the dryer, clean the lint trap and check the exhaust vent for restrictions, since poor airflow is a common cause of overheating.
Frequently Asked Questions
My dryer isn't heating or runs too hot. Is this the part I need?
A failed cycling thermostat can cause either symptom. It may stay open and prevent heat, or stay closed and let the dryer overheat. Check for a clogged vent and test the thermostat for continuity before replacing it.
What's the difference between the cycling thermostat and the high limit thermostat?
The cycling thermostat controls normal drying temperature by switching the heating element on and off. The high limit thermostat and thermal fuse are separate safety devices that cut power if the dryer overheats. This listing is for the cycling thermostat only.
How do I test this thermostat?
With the dryer unplugged and the wires removed, check for continuity across the terminals with a multimeter at room temperature. A properly working cycling thermostat should show continuity when cool. No continuity means it has failed.
Will this fit my dryer?
It fits many Whirlpool-built dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping
✓ Quality Aftermarket Parts
✓ Compatibility Support
✓ Secure Checkout
XPARTCO 279973 Dryer Thermostat Kit
The XPARTCO 279973 is an aftermarket replacement dryer thermostat and thermal cut-off kit compatible with a wide range of Whirlpool-family electric dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, and Admiral. The kit contains two components — the high-limit thermostat (L295-80F) and the thermal cut-off fuse — both located on the heating element housing. Together they protect the dryer's heating element from overheating: the high-limit thermostat monitors element temperature and cuts power if it exceeds safe levels, then resets when cooled. The thermal cut-off fuse is a backup one-time device that permanently opens the circuit if the thermostat fails to protect the element.
Both parts are mounted on the side of the heating element housing and can be accessed through the dryer's back panel. The thermal cut-off fuse is a non-resettable one-time device — once it opens, it must be replaced. The 279973 kit includes both parts, an instruction sheet, and hardware. It directly replaces 3391913, 3404151, 3404152, 3977395, 8318314, 897710, 279973VP, AP3094323, and several additional cross-reference numbers. Note: this kit is for electric dryers only. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO 279973 Dryer Thermostat Kit fixes Whirlpool-family electric dryers with no heat, overheating, or a dryer that shuts off too early. Kit includes the L295-80F high-limit thermostat (auto-reset, opens at 295°F) and the thermal cut-off fuse (352°F, one-time). Both mount on the heating element housing. Electric dryers only. Replaces 3391913, 3404151, 8318314, 897710, AP3094323. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, and Admiral.
Common Problems This Kit Fixes
Dryer produces no heat — thermal cut-off fuse or high-limit thermostat has failed
Dryer overheats — clothes or drum too hot at the end of a cycle
Dryer shuts off early before clothes are dry
Dryer takes multiple cycles or very long time to dry clothes
Repeated no-heat failures — underlying overheating condition affecting the element housing components
Dryer tumbles normally but produces no heat at all
What's in the Kit
Part 1 of 2
High-Limit Thermostat (L295-80F)
Opens at 295°F — cuts power to the heating element if temperature exceeds safe levels · Auto-resets when cooled · Located on the heating element housing · Should show closed continuity (near-zero resistance) at room temperature
Part 2 of 2
Thermal Cut-Off Fuse (352°F)
Opens at 352°F — one-time backup safety device on the heating element housing · Permanently interrupts power to the heating element if the high-limit thermostat fails to protect it · Cannot be reset — must be replaced if blown · Should show closed continuity at room temperature when working
Replaces Part Numbers
This thermostat kit directly replaces the following OEM and cross-reference part numbers:
279973, 279973VP, 3391913, 3404151, 3404152, 3977395, 8318314, 897710, ER279973, PD00002626, EAP334387, AWP39286, AH334387, AP3094323, EA334387, PS334387.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermostat kit is compatible with select electric dryers only from the following brands:
Whirlpool electric dryers (Duet, Cabrio, and standard series)
Kenmore / Sears electric dryers (Whirlpool-built models)
Maytag electric dryers
KitchenAid electric dryers
Amana electric dryers
Inglis electric dryers
Roper electric dryers
Admiral electric dryers
Important: This kit is for electric dryers only. Gas dryers use a different burner assembly and require a different thermostat kit (XP6974 for Whirlpool-family gas dryers). Always verify your dryer type and model number before ordering. Also: if the thermal cut-off fuse has blown, always check for a clogged exhaust vent before replacing — a blocked vent is the most common root cause of overheating and repeated fuse failures.
Key Features
2-part kit — high-limit thermostat and thermal cut-off fuse, both on the heating element housing
High-limit thermostat (L295-80F) — opens at 295°F to cut element power, auto-resets when cooled
Thermal cut-off fuse (352°F) — one-time backup safety device; permanently opens if thermostat fails to protect the element
Both parts located on the heating element housing — accessible from the dryer back panel
Replacing both together ensures complete thermal protection is restored on the element housing
Replaces 3391913, 3404151, 8318314, 897710, AP3094323, and over 10 additional cross-reference numbers
Electric dryers only — not for gas dryer models
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, and Admiral electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Installs in 20–30 minutes with basic hand tools
Product Specifications
Kit Part Number
279973
Condition
Aftermarket Replacement
Application
Electric Dryers Only
Kit Includes
1x High-Limit Thermostat (L295-80F), 1x Thermal Cut-Off Fuse (352°F), hardware, instruction sheet
High-Limit Thermostat Rating
L295-80F — opens at 295°F, resets at 215°F — auto-resets
Thermal Cut-Off Fuse Trip Temp
352°F — one-time, non-resettable
Location
Heating element housing (both parts)
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, Admiral
Installation Notes
⚠️ Unplug Dryer Before Starting — Electric Dryers Only Disconnect power before beginning. Remove the back panel of the dryer by unscrewing the perimeter screws to expose the heating element housing. Both the high-limit thermostat and thermal cut-off fuse are mounted on the side of the heating element housing — the thermostat is typically the larger component and the thermal cut-off fuse is smaller. Test each component with a multimeter before removing (both should show closed continuity at room temperature; the failed one will read open). Photograph the wiring before disconnecting. Disconnect the wires, remove the mounting screws, and install the new components in the same positions. Reconnect the wires and mounting screws, reinstall the back panel, restore power, and run a test cycle to confirm heat. Tip: Before running the dryer, clean the full length of the exhaust duct — a clogged vent is the most common cause of overheating and a blown thermal cut-off fuse. Tools needed: Phillips screwdriver, 1/4" nut driver, multimeter.
Frequently Asked Questions
What is the difference between the high-limit thermostat and the thermal cut-off fuse in this kit?
The high-limit thermostat (L295-80F) is a resettable safety switch that opens at 295°F to cut power to the heating element and resets automatically when the temperature drops. It is the primary protection against overheating during normal operation. The thermal cut-off fuse is a one-time backup device rated at 352°F — it permanently opens the circuit if the heating element temperature climbs beyond the point the thermostat should have caught. Once the cut-off fuse opens, it must be replaced; it does not reset on its own. If the cut-off fuse has blown, it usually means the high-limit thermostat also failed to do its job and should be replaced at the same time — which is exactly what this kit provides.
How do I test these parts with a multimeter?
Unplug the dryer and remove the back panel to access the heating element housing. Disconnect each component from the wiring and probe both terminals with a multimeter set to continuity or resistance mode. At room temperature, both the high-limit thermostat and the thermal cut-off fuse should show closed continuity (near-zero resistance). Any component that reads open circuit (no continuity) has failed and needs to be replaced. The thermal cut-off fuse reads open even after it cools — it is non-resettable. The high-limit thermostat may read open at room temperature if it has failed internally rather than by an overheat trip.
How is the 279973 kit different from the XP6974 thermostat kit?
The 279973 is a 2-part kit — high-limit thermostat and thermal cut-off fuse — designed specifically for the heating element housing of Whirlpool-family electric dryers. The XP6974 is a 4-part kit — cycling thermostat, thermal fuse, high-limit thermostat, and thermal cut-off — designed for Whirlpool-family gas and electric dryers, covering both the exhaust duct components and the burner/element housing components. If your electric dryer is showing no-heat and you need only the heating element housing components, the 279973 kit covers exactly those two parts. If you want to replace all thermal components in one repair, the XP6974 covers a broader set.
Why does the thermal cut-off fuse keep blowing?
If the thermal cut-off fuse blows repeatedly after replacement, it almost always means there is an underlying overheating condition causing the heating element housing to run hotter than it should. The most common cause is a clogged or restricted exhaust vent — lint accumulation in the duct reduces airflow, trapping heat inside the dryer cabinet and around the element. Other causes include a failed cycling thermostat that is not regulating element temperature correctly, a stuck heating element relay, or a dryer in an enclosed space with inadequate ventilation. Always clean the full exhaust duct and check the cycling thermostat (WP3387134) before replacing the thermal cut-off fuse a second time.
Is this an OEM or aftermarket part?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the temperature ratings and specifications of the original 279973 high-limit thermostat and thermal cut-off fuse kit.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WE04X24550 Dryer Timer
The Genuine OEM GE WE04X24550 is a mechanical dryer timer. It controls the dryer's cycle duration and its electrical components, advances the cycle through its stages, and shuts the dryer off at the end of the cycle. When the timer fails, the dryer may not start, tumble endlessly, shut off early, or have a timer knob that won't advance.
This is the original GE part, and it is a direct replacement for the earlier WE04X24549 timer. It is listed for select GE dryers, both gas and electric. Check your model number before ordering, since timers differ between dryer families.
Quick Answer
The Genuine OEM WE04X24550 Dryer Timer fixes a GE dryer that tumbles endlessly, shuts off early, won't start, or has a timer knob that won't advance because the timer has failed. It replaces WE04X24549. Classic symptom: the dial doesn't advance, or the dryer runs without ever shutting off at the end of the cycle.
Common Problems This Part Fixes
Dryer tumbles endlessly and doesn't shut off
Dryer shuts off early
Timer knob won't advance
Dryer won't start, or starts and then stops
Controls that don't respond, or heat that doesn't come on
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer directly replaces the following part numbers:
WE04X24550, WE04X24549, 234D2377P003, 234D2377P004, 4546121, TMD14M30, TMD16M12, AGE25986, AP6031056, FIX11763064, OEM18093177, PD00039467, PS11763064
WE04X24549 is the earlier GE number, and WE04X24550 was designed as its direct replacement. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This timer is listed for GE gas and electric dryers, including these examples:
GTD42GASJ0WW, GTD42GASJ1WW, GTD42GASJ3WW, GTX42GASJ1WW, GTX42GASJ3WW
GTD48GASW0WB, ETD48GASW0WB, GTD48EASW0WB
XTD72G8ST0WS, XTD72E8ST1WS
Note: The models above are a sample from one retailer, not a full list. The timer's fit depends on the dryer family, so confirm your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE mechanical dryer timer
Controls cycle duration and advances through the cycle stages
Handles end-of-cycle shutoff
Direct replacement for WE04X24549
Fits select GE gas and electric dryers
Product Specifications
Part Number
WE04X24550
OEM Part Number
WE04X24550
Part Type
Dryer Timer (Mechanical)
Condition
Genuine OEM
Dimensions
4" D x 3" H x 2" W
Application
GE Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. Remove the console as shown in your model's service guide to reach the timer. Photograph the wiring, or note each wire's position, before disconnecting it, then move the connectors to the new timer, mount it, and refit the knob. Test every cycle selection before closing the dryer. This repair involves electrical components, so consult a qualified technician if you are not comfortable with it.
Frequently Asked Questions
My dryer won't shut off, or the knob won't advance. Is this the part I need?
A worn or stuck timer is a common cause of endless tumbling, early shutoff, and a knob that won't move. If the dryer won't start or heat, check the door switch, thermal fuse, and heating components too, then test the timer with a multimeter against your wiring diagram.
Is WE04X24550 the same as WE04X24549?
WE04X24550 was designed as the direct replacement for WE04X24549, and this timer covers both numbers.
Is this a hard repair?
Retailers rate it medium difficulty because it involves electrical components. Photograph the wiring before you start, and consult a technician if you are unsure.
Will this fit my dryer?
It is listed for select GE gas and electric dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
279769 Genuine OEM Whirlpool Dryer Thermostat Kit
The 279769 is a genuine Whirlpool OEM thermal cut-off and high-limit thermostat kit for Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral electric dryers. This kit bundles two components that guard against overheating at different thresholds: the 3390291 high-limit thermostat (rated L250-80F) monitors internal temperature and interrupts power at approximately 250°F to prevent overheating, then resets itself automatically once the dryer cools — no replacement needed after each trip. The 3977394 thermal cut-off fuse is the backup: rated at 352°F, it's a one-time safety device that permanently opens the circuit if temperatures climb high enough that the thermostat alone didn't prevent an overheat.
These two parts are sold together and should be replaced together as a set, since they protect the same circuit and tend to be stressed by the same underlying problem. Whirlpool's own guidance is direct: when the thermal cut-off fails, it usually indicates a venting problem, and failing to correct that airflow issue will cause repetitive failures even with new parts installed. Symptoms include the dryer not heating, clothes coming out extremely hot, or the dryer not running at all. This kit is commonly used alongside heating element 4391960. It directly replaces 279548, 2796769, 279769VP, 2821, 2004, 3387812, 3389946, 3398671, 3977394, 695563, 80001, SET184, SET198, TJSET198, ET184, AP3094224, AH334278, EA334278, EAP334278, PD00002485, PS334278, WP3390291, AP6008306, 3390291, 696397, and PS11741441.
Quick Answer
The 279769 Genuine OEM Whirlpool Dryer Thermostat Kit fixes Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral electric dryers with no heat, no power at all, or clothes coming out dangerously hot. Includes the 3390291 high-limit thermostat (250°F, auto-resetting) and the 3977394 thermal cut-off fuse (352°F, one-time). Replaces 279548, 2796769, 279769VP, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AP3094224, PS334278, WP3390291, AP6008306, 3390291, 696397, PS11741441. Always inspect and clean the exhaust venting when replacing this kit — a blown thermal fuse is a symptom of restricted airflow, and skipping the vent check leads to repeat failures.
What's In The Kit
Component
Rating
Function
3390291 High-Limit Thermostat
L250-80F (~250°F)
Interrupts power to prevent overheating, resets automatically once the dryer cools.
3977394 Thermal Cut-Off Fuse
352°F
One-time backup safety device — permanently opens the circuit if temperature exceeds safe limits. Cannot reset.
Common Problems This Kit Fixes
Dryer won't start at all — no lights, no tumble, no response
Dryer runs but produces no heat
Clothes coming out extremely hot, hot enough to be uncomfortable to handle
Dryer that stopped working suddenly after running unusually hot
Repeated thermal cut-off failures on a dryer with a known venting issue
Dryer that shuts off prematurely mid-cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermostat kit directly replaces the following OEM and cross-reference part numbers:
279769, 2004, 279548, 2796769, 279769VP, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AH334278, EA334278, AP3094224, OEM9282681, SET184, SET198E, AP334278, L250-80F, PS334278, AWP39149, PD00002485.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermostat kit is compatible with select Whirlpool electric dryers, and also fits select Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral dryers built on the Whirlpool platform, including model numbers such as:
7MWET4027HW0
WET3300XQ0
WET4027EW0, WET4027EW1
WET4027HW0, WET4027HW1, WET4027HW2
WETLV27FW0, WETLV27HW0, WETLV27HW1, WETLV27HW2, WETLV27HW3
YWET4027EW1, YWET4027HW0, YWET4027HW1, YWET4027HW2
Note: This kit was used on Whirlpool-built electric dryers primarily from 1985 to 1995. Always verify your full model number before ordering, since Whirlpool used several different thermostat and fuse designs across its dryer lineup over the years. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified thresholds for both components
2-piece kit: 3390291 high-limit thermostat (250°F, auto-resetting) and 3977394 thermal cut-off fuse (352°F, one-time)
Resolves "no heat," "no power at all," and "clothes coming out extremely hot" symptoms
Addresses two overheat-protection thresholds in the same circuit at once
Commonly used alongside heating element 4391960
Direct drop-in replacement for both original components
Replaces 279548, 2796769, 279769VP, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AP3094224, PS334278, WP3390291, AP6008306, 3390291, 696397, and PS11741441
Compatible with Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral electric dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Kit Part Number
279769
Kit Contents
1x High-Limit Thermostat (3390291), 1x Thermal Cut-Off Fuse (3977394)
Condition
Genuine OEM
Brand
Whirlpool
High-Limit Thermostat Rating
L250-80F (~250°F, auto-resetting)
Thermal Fuse Rating
352°F (one-time, non-resettable)
Companion Heating Element
4391960 (commonly used together)
Repair Difficulty
Easy to Moderate — basic tools required
Compatible Brands
Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, Admiral
Installation Notes
⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel, near the heating element and blower housing where both components are mounted. Photograph the wiring connections before disconnecting anything, since the thermostat and fuse can be easy to swap positions by mistake. Remove each old component from its mounting position, noting orientation, and disconnect its wiring. Before reassembling, fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. When the thermal cut-off fails, it usually indicates a venting problem, and failing to correct that airflow issue will cause repetitive failures even with these new parts installed. Install the new 3390291 thermostat and 3977394 thermal fuse from this kit in the same positions as the parts they replace, reconnecting wiring exactly as photographed. Reassemble the panel, restore power, and run a full test cycle to confirm normal, consistent heating with no premature shutoffs. Tools needed: Phillips or nut driver (model-dependent), work gloves.
Frequently Asked Questions
My clothes are coming out extremely hot, hot enough to burn my hands. Is this the right kit?
Yes, this is a documented symptom this kit addresses. If the high-limit thermostat fails to regulate temperature correctly, the dryer can run far hotter than it should, producing dangerously hot clothing at the end of a cycle. Whirlpool's own parts support has specifically pointed customers with this exact complaint toward this kit. Stop using the dryer if you notice this symptom and replace both components promptly.
Why do I need to replace both the thermostat and the fuse together?
These two parts protect the same circuit at different thresholds and tend to fail from the same underlying cause. If the high-limit thermostat isn't regulating temperature correctly, the thermal fuse often ends up blowing as the backup safety measure. Replacing only one risks the other failing again shortly after, so they're sold and serviced together as a set.
I replaced this kit and the dryer failed again. What should I check?
This is a strong sign the underlying cause — almost always restricted airflow — was never addressed. Thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. Failing to correct a venting issue will cause repetitive failures of this kit even when it's brand new.
Should I replace the heating element at the same time?
It's worth considering if your dryer's heating element (commonly 4391960 on compatible models) is original and has been running alongside a failing thermostat, since sustained overheating can stress the element as well. It's not required, but since you'll already have the panel open for this repair, it's a reasonable time to inspect the element for visible damage.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It includes the same temperature thresholds and mounting configuration as the high-limit thermostat and thermal cut-off fuse originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
CIM15 Ice Maker (Copper) 15 Feet Copper Tubing and Self Tapping Saddle Valve
Includes 15' 1/4" copper tubing, self tapping saddle valve and compression fitting.
Low lead valve and fittings.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO EXP571 Dryer Door Catch
The XPARTCO EXP571 is an aftermarket replacement door catch for electric and gas dryers from Whirlpool, Maytag, Kenmore, Frigidaire, Electrolux, GE, Amana, Crosley, White-Westinghouse, and LG. The door catch is the small plastic part the dryer door latches onto to stay securely shut during a cycle. Keeping the door tightly closed holds heat and airflow inside the drum, so clothes dry efficiently. Over time, regular wear, physical damage, or a door that has drifted out of alignment can cause the catch to crack, wear down, or lose its grip, and the door stops latching reliably.
Made from durable plastic, this is a direct-fit replacement with a simple snap-in installation — no tools required. Because the same catch design was used across several appliance families, it carries a long cross-reference list spanning Whirlpool, Frigidaire, and GE part numbers; see the Replaces list below. Each order includes 1 door catch.
Quick Answer
The XPARTCO EXP571 Dryer Door Catch fixes a dryer door that won't stay closed, won't latch properly, or pops open during a cycle because the catch is cracked, worn, or damaged. Durable plastic, snap-in install with no tools, 1 catch per order. Fits Whirlpool, Maytag, Kenmore, Frigidaire, Electrolux, GE, Amana, Crosley, White-Westinghouse, and LG dryers. Classic symptom: you have to push or hold the door shut, or it swings open mid-cycle and heat escapes.
Common Problems This Part Fixes
Dryer door won't stay closed or pops open during a cycle
Door doesn't latch with a firm, positive click
Visibly cracked, broken, or worn catch
Heat escaping around the door, leaving clothes damp after a full cycle
Door feels loose or misaligned when closed
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door catch directly replaces the following part numbers:
WP71002106, WP3389441, 3389441, 71002106, AWP47565, PD00004499, AP6010685, PS11743869, AP6008299, PS11741434, WE1X1195, AGE1230465, AP2042209, PS266896, 131658800, AFR14189, AP2107362, PD00000626, PS418433, 5307521419, 10690002, 10690001, AFR14189, AP4450746, PD00000626, PS418433
This one catch design was sold under the part numbers of several manufacturers: Whirlpool/Maytag (WP71002106, WP3389441), Frigidaire/Electrolux (131658800, 5307521419), and GE (WE1X1195, WE1X1153, WE01X10023, and related). The AP/PS-prefixed numbers are third-party catalog cross-references for the same physical part.
Compatibility
This door catch is used on dryer models from the following brands:
Whirlpool, Maytag, Amana, and Kenmore (Whirlpool-built) dryers
Frigidaire, Electrolux, Crosley, White-Westinghouse, and Kenmore (Frigidaire-built) dryers
GE dryers
Select LG dryers
Note: Because this catch was used across so many brands and model years, a full model-number list can't be shown here. The safest way to confirm fit is to match the number on your old catch, or on your dryer's parts diagram, against the Replaces list above rather than relying on brand alone. Contact our support team with your model number and we'll verify before you order.
Key Features
Aftermarket replacement dryer door catch
Durable plastic construction for long-lasting use
Simple snap-in installation — no tools required
Holds the door securely closed to keep heat and airflow in the drum
Cross-references to Whirlpool, Frigidaire, GE, and other OEM numbering
1 door catch per order
Product Specifications
Part Number
EXP571
OEM Part Number
WP71002106, 131658800, WE1X1195
Part Type
Dryer Door Catch
Condition
Aftermarket Replacement
Material
Plastic
Quantity
1 Door Catch
Installation
Snap-In, No Tools Required
Application
Whirlpool, Maytag, Kenmore, Frigidaire, Electrolux, GE, Amana, Crosley, White-Westinghouse & LG Dryers
Installation Notes
ℹ️ No Tools Required Unplug the dryer before starting as a general safety precaution. Open the dryer door and locate the worn or broken catch the door latches onto. Pull or pry the old catch free from its mounting position, then press the new catch into the same opening until it snaps firmly into place. Close the door and confirm it latches with a positive click and stays shut. If the door still won't seat or latch evenly after the swap, check the door's alignment and hinges, since a misaligned door can wear out a new catch quickly.
Frequently Asked Questions
My dryer door won't stay shut — is this the part I need?
Very likely. A cracked, worn, or damaged door catch is a common reason a dryer door won't latch or pops open mid-cycle. Inspect the old catch for cracks or wear; if it looks damaged, replacing it should restore a firm latch.
Will this fit my dryer? I have a Whirlpool, Frigidaire, or GE.
This catch is cross-referenced to part numbers from all three families, plus several others. Match the number on your old catch or your dryer's parts diagram against the Replaces list above. If you're unsure, contact our support team with your model number and we'll confirm fit before you order.
Do I need tools to install it?
No. It's a simple snap-in design — remove the old catch and press the new one into place until it clicks.
How many catches come in this order?
Each order includes 1 door catch.
The door still doesn't close right after replacing the catch. What else could be wrong?
A door that has drifted out of alignment can keep a new catch from seating properly and wear it out fast. Check the door hinges and alignment against the cabinet opening.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WB27X11212 Microwave Thermostat – Compatible with GE, Hotpoint & Kenmore Microwaves
Product Description
Ensure safe microwave operation with the XPARTCO WB27X11212 Microwave Thermostat. This high-quality aftermarket replacement monitors internal temperatures and shuts off power if overheating is detected. A faulty thermostat can cause the microwave to shut off unexpectedly, fail to heat, or stop mid-cycle. Replacing it with this reliable XPARTCO thermostat restores proper temperature regulation and protects critical internal components.
Replaces Part Numbers
WB27X11212, 3026293, SE-7350-006, KSD201 - 120C, WB24X28948, WB27X10854, AP5791056, PS8754627.
Compatibility
This replacement microwave thermostat fits select GE, Hotpoint, and Kenmore microwave ovens.
Example compatible models include (but are not limited to):GE JVM1540DM5BB, JVM3160RFSSHotpoint RVM5160DHBBKenmore 363.62709300
Always verify your microwave’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM temperature-sensing performance
🌡️ Overheat Protection – Prevents damage by cutting power at unsafe temperatures
💰 Cost-Effective Repair – Reliable solution without OEM pricing
🛠️ Direct-Fit Design – Installs easily with existing mounting and wiring
🛡️ Fixes Common Issues – Solves random shut-offs, no-heat conditions, or thermal errors
📐 Product Specification
Part Number: WB27X11212
Component Type: Microwave Thermostat / Thermal Switch
Temperature Rating: OEM-equivalent cutoff
Material: Metal housing with bimetal thermal disc
Mounting: Screw-mounted
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Unplug the microwave and discharge high-voltage components before servicing. Microwave repairs involve HIGH VOLTAGE.
Steps:
Disconnect power and remove the microwave cover.
Locate the thermostat mounted near the magnetron or cavity.
Disconnect wires and remove mounting screws.
Install the new XPARTCO WB27X11212 thermostat.
Reconnect wiring, reinstall the cover, and restore power.
Test microwave operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your microwave and restore safe operation — Add to Cart Now for a dependable, budget-friendly repair!
