Genuine OEM Whirlpool Washer Part
WP3951632 Washer Genuine OEM Lower Agitator
The lower agitator base moves back and forth during the wash cycle to help circulate clothing through the water and detergent.
Product Overview
The Whirlpool WP3951632 Washer Lower Agitator is the lower half, or base, of the agitator used in compatible top-load washing machines. During the wash cycle, the agitator moves back and forth to circulate clothing through the wash water and detergent for effective cleaning.
This is a new Genuine OEM Whirlpool replacement part manufactured to the original equipment specifications for proper fit and operation in compatible models.
Quick Answer
WP3951632 is the Genuine OEM Whirlpool lower agitator base for select top-load washers. It replaces part number 3951632. This listing is for the lower agitator only; the upper agitator, agitator dogs, cam, cap, bolt, dispenser, and other hardware are not included unless specifically shown in the product photographs.
Common Problems This Part May Fix
Washer fills and runs but clothing is not agitated properly
Lower agitator does not move during the wash cycle
Cracked, broken, or damaged agitator fins
Worn or stripped center connection on the agitator base
Agitator slips on the transmission shaft
Poor washing or uneven clothing movement
Replaces and Cross-References
WP3951632, 3951632, 547649, AP6008904, AWP47252, EAP11742045, PD00004360, PS11742045.
WP3951632 is the current manufacturer part number. Other numbers shown are previous manufacturer or retailer cross-reference numbers used to identify the same lower agitator.
Compatibility
Designed for select Whirlpool-built top-load washers, including certain models sold under the Whirlpool, Amana, Crosley, Estate, Inglis, and Kenmore brand names. Confirmed model examples include:
WTW4800BQ1
WTW4816FW1
WTW4816FW3
WTW4850XQ3
LSQ9010PW3
7MWTW1701DQ1
3RGSC9455JQ1
110.20232711
VAW3584GW0
Important: This is only a partial compatibility list. Agitators can look similar but use different shaft connections, heights, fins, and internal components. Verify the complete washer model number before ordering.
Key Features
Genuine OEM Whirlpool replacement part
Lower agitator base for compatible top-load washers
Moves clothing through wash water and detergent
Durable molded construction
Designed for original fit and operation
Direct replacement when WP3951632 is specified
Replaces original part number 3951632
Product Specifications
Manufacturer Part Number
WP3951632
Brand
Whirlpool
Part Type
Washer Lower Agitator / Agitator Base
Condition
New
Quality
Genuine OEM
Application
Top-Load Washing Machine
Primary Function
Moves clothing through wash water during agitation
Included
One Lower Agitator Base
Installation Notes
Unplug the washer before beginning the repair.
Remove the fabric-softener dispenser or agitator cap, if installed.
Remove the inner cap or seal to access the agitator retaining bolt.
Use the correct socket and extension to remove the center retaining bolt.
Lift the agitator assembly from the washer and separate the upper agitator from the lower base as required.
Inspect the agitator bolt, thrust washer, cam, agitator dogs, upper agitator, and transmission shaft for additional wear.
Install the new lower agitator in the same position, tighten the retaining bolt securely, and reinstall all caps or dispenser components.
Installation tip: A washer that does not agitate can also have worn agitator dogs, a damaged cam, a loose bolt, a failed drive component, or a transmission problem. Diagnose the appliance before ordering when the cause is uncertain.
Frequently Asked Questions
Is WP3951632 a genuine Whirlpool part?
Yes. WP3951632 is a Genuine OEM Whirlpool replacement lower agitator.
Does this listing include the complete agitator assembly?
No. This part is the lower agitator base only. The upper agitator, cam, agitator dogs, cap, dispenser, bolt, and related hardware are separate unless specifically shown or stated.
What part number does WP3951632 replace?
WP3951632 replaces the previous manufacturer part number 3951632.
Will this fit every Whirlpool washer?
No. It fits only select top-load washer models. Verify your complete model number and required manufacturer part number before purchasing.
Should I replace the agitator dogs at the same time?
Inspect the agitator dogs and cam while the agitator is disassembled. Replace them separately if they are worn, rounded, cracked, or slipping.
Shop With Confidence
Purchase the correct Genuine OEM replacement part for dependable fit and performance. Verify your washer model number before ordering, and contact our parts team when compatibility assistance is needed.
Genuine OEM WhirlpoolFast U.S. ShippingCompatibility SupportSecure Checkout
Genuine Whirlpool OEM
Whirlpool WP8577374 Washer Genuine OEM Transmission Shaft Seal
Genuine OEM center shaft / basket drive tube seal for select Whirlpool-built top-load washers and laundry centers.
Product Overview
The Whirlpool WP8577374 Washer Transmission Shaft Seal is a genuine OEM sealing component used in the center drive area of compatible washers. It is also described as a center shaft seal or basket drive tube seal.
This seal helps keep wash water from leaking into the basket drive tube / gearcase area. A worn or damaged seal may allow water or dark oily residue to appear around the center shaft area.
Quick Answer
WP8577374 is a Genuine Whirlpool OEM washer center shaft / basket drive tube seal. It replaces original part number 8577374 and is used on many Whirlpool-built direct-drive washers sold under Whirlpool, KitchenAid, Roper, Estate, Maytag, Amana, Admiral, Crosley, and Kenmore brands.
Common Problems This Part May Fix
Water leaking around the center shaft area
Water entering the basket drive tube
Dark or oily-looking residue near the center of the washer
Seal deterioration discovered during transmission or basket-drive service
Preventive replacement during a major centerpost or gearcase repair
Replaces and Cross-References
WP8577374, 8577374, 4438792, AP6013519, AWP49372, PD00045466, PS11746745.
Cross-reference numbers are provided for identification. Always verify the complete washer model number before ordering.
Compatibility
Fits select Whirlpool-built washers and laundry centers. Compatible model examples include:
3RGSC9400SL0
3XLSQ7533JQ4
KAWS850LQ2
CAM2752TQ0
7MMMS0120VM0
110.20522900
WTW5505VQ0
110.28762700
7MWT96540ST2
7MMSE1000TW0
ETW4400WQ1
MGT3800XW3
Important: This is only a partial compatibility list. Confirm your full model number because Whirlpool-built washers can use several different shaft, stem, centerpost, and transmission seals that are not interchangeable.
Key Features
Genuine Whirlpool OEM replacement part
Center shaft / basket drive tube sealing component
Helps prevent wash water from entering the drive tube area
Direct replacement for original part 8577374
Used on many Whirlpool-built direct-drive washer platforms
Product Specifications
Manufacturer Part Number
WP8577374
Brand
Whirlpool
Part Type
Transmission / Center Shaft Seal
Alternate Description
Basket Drive Tube Seal / Centerpost Seal
Condition
New
Part Quality
Genuine OEM
Replaces
8577374
Application
Washer Center Drive / Basket Drive Tube
Package Quantity
1 Seal
Installation Notes
Unplug the washer and shut off the water supply before service.
Disassembly of the basket, drive components, or gearcase area may be required depending on model.
Remove the old seal carefully to avoid damaging the sealing surface or drive tube.
Clean and inspect the shaft/tube sealing surface before installing the new seal.
Install the seal squarely and to the correct depth following the model-specific service procedure.
Inspect related tub, centerpost, and transmission seals while the washer is disassembled.
Service note: WP8577374 is not the same part as WP8577376 or WP91939. These seals are used in different locations. Verify the part number required for your exact washer before installation.
Frequently Asked Questions
Is WP8577374 a Genuine Whirlpool OEM part?
Yes. WP8577374 is a genuine Whirlpool replacement seal.
What does this seal do?
It helps prevent wash water from leaking into the basket drive tube / center drive area of the washer.
Does WP8577374 replace 8577374?
Yes. WP8577374 is the current Whirlpool replacement for original part number 8577374.
Is this the same as WP8577376 or WP91939?
No. Although all are washer shaft/sealing components, they serve different locations and should not be substituted unless your model-specific parts documentation calls for that number.
Shop With Confidence
Order by complete model number whenever possible. Correct fit is especially important for washer centerpost and transmission sealing components.
Genuine Whirlpool OEM Direct Replacement Model Verification Recommended Compatibility Support
XPARTCO 285753A Washer Direct Drive Motor Coupler
The XPARTCO 285753A is an aftermarket replacement direct drive motor coupler (also called a motor coupling or drive coupler) compatible with a wide range of Whirlpool-family top-load washers including Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The motor coupler connects the drive motor shaft to the transmission — transferring the motor's power to the transmission to drive the agitator and spin the drum during wash and spin cycles. It is a deliberate weak point in the drivetrain: if the washer is overloaded, the coupler breaks apart first, protecting the far more expensive motor and transmission from damage.
This is the updated 285753A design with metal sleeves for added strength — it replaces all previous coupler styles and versions including the original 285753, 280152, 285743, and 285140. This kit includes 2 plastic coupling halves and 1 rubber isolation dampener. Dimensions approximately 2" L x 1-1/4" W x 2" H. Fits direct-drive top-load washers only — not compatible with belt-drive machines. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 285753A Washer Motor Coupler fixes top-load washers that fill and drain normally but will not agitate or spin. The motor coupler connects the motor to the transmission — when it breaks, the motor runs but neither the agitator nor the drum moves. Kit includes 2 plastic coupling halves and 1 rubber dampener. Updated design with metal sleeves. Replaces all previous coupler versions including 285753, 280152, 285743, 285140. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, and more direct-drive top-load washers.
Common Problems This Part Fixes
Washer fills with water and drains but will not agitate or spin
Motor runs (you can hear it) but agitator and drum do not move
Washer spins slowly or incompletely — clothes still very wet after spin cycle
Loud humming or buzzing from the motor area without agitation or spin
Burning rubber or plastic smell during the wash or spin cycle
Washer shakes excessively — broken coupler causing uneven power transfer
Broken plastic or rubber pieces visible inside the bottom of the washer cabinet
Replaces Part Numbers
This motor coupler directly replaces the following OEM and cross-reference part numbers:
285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AWP39583, PD00002353, AH1485646, EAP1485646, EA1485646, TJ285753, ER285753, AP3963893, PS1485646.
The 285753A replaces all previous motor coupler styles and versions. If your parts diagram shows any of the older numbers above, the 285753A is the correct current replacement.
Compatibility
This motor coupler is compatible with select direct-drive top-load washers from the following brands:
Whirlpool top-load washers (direct drive — no belt)
Kenmore / Sears top-load washers — 70 series, 80 series, 90 series, and 110 series (Whirlpool-built)
KitchenAid top-load washers
Maytag top-load washers (direct drive models)
Amana top-load washers
Roper top-load washers
Admiral top-load washers
Estate top-load washers
Crosley top-load washers
Inglis top-load washers
Magic Chef top-load washers
Important: The 285753A is for direct-drive top-load washers only — machines where the motor connects directly to the transmission without a belt. It is not compatible with front-load washers or older belt-drive top-load washers. If you can see a drive belt inside your washer cabinet, this is not the correct part.
Key Features
Connects the drive motor shaft to the transmission — transfers motor power to drive the agitator and spin drum
Intentional sacrificial part — designed to break before the motor or transmission during overload, saving far more expensive components
Updated 285753A design with metal sleeves — stronger than original all-plastic versions; replaces all previous coupler styles
Kit includes 2 plastic coupling halves and 1 rubber isolation dampener — complete assembly
Dimensions: approximately 2" L x 1-1/4" W x 2" H
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef direct-drive washers
Replaces all previous coupler versions including 285753, 280152, 285743, and 285140
Aftermarket replacement built to OEM-equivalent quality standards
Cost-effective DIY repair — typically under $15 and 30–45 minutes of work
Product Specifications
Part Number
285753A
Part Type
Washer Direct Drive Motor Coupler (Motor Coupling Kit)
Condition
Aftermarket Replacement
Application
Direct-Drive Top-Load Washers (no belt)
Dimensions
Approx. 2" L x 1-1/4" W x 2" H
Color
Black / Off-White
Material
Rubber / Plastic / Metal (metal sleeve inserts)
Kit Includes
2 plastic coupling halves, 1 rubber isolation dampener
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Remove the washer's cabinet by releasing the top panel clips and removing the front panel screws — the motor and transmission are at the bottom of the machine. The motor coupler is a three-piece assembly between the motor shaft and the transmission input shaft. Pull the motor forward to release it from the mounting clips. The broken coupler pieces will likely fall out at this point — inspect the motor shaft and transmission shaft for any remaining plastic debris and clear it. Press the new rubber dampener onto the motor shaft coupling half first, then onto the transmission shaft coupling half, and snap the motor back into the mounting clips. Verify both coupler halves are seated securely and the rubber dampener is centered between them. Reassemble the front panel and top panel. Restore power and run a short cycle to confirm the agitator and spin function normally. Work gloves recommended — sharp sheet metal edges inside the cabinet. Tools needed: Phillips screwdriver, 1/4" nut driver, flat-head screwdriver, work gloves.
Frequently Asked Questions
What does the motor coupler do?
The motor coupler is a three-piece assembly — two plastic coupling halves and a rubber dampener — that connects the drive motor shaft to the transmission input shaft in direct-drive washing machines. The motor spins the coupler, which transfers that rotation to the transmission, which in turn drives the agitator and drum. The rubber dampener absorbs shock and vibration between the rigid motor and transmission shafts during direction changes. The coupler is intentionally designed as the weakest link in the drivetrain — if the washer is overloaded or the transmission seizes, the coupler breaks first to protect the far more expensive motor and transmission from damage.
My washer fills and drains but won't agitate or spin — is the motor coupler the cause?
Yes — this is the classic symptom of a broken motor coupler. Because the pump is typically driven directly by the motor before the coupler connection, a broken coupler allows the motor to run and the pump to drain normally, but neither the agitator nor the spin drum receives any power. If you can hear the motor running but nothing moves, open the washer cabinet and inspect the coupler — you will likely find broken plastic pieces at the bottom of the cabinet near the motor and transmission.
Why does the motor coupler break?
The most common cause is overloading — packing too many heavy items into the washer creates enough mechanical resistance that the coupler snaps rather than allowing the motor to be damaged. Other causes include a worn or seized transmission, a worn motor, normal wear over many years of use, or a single sudden jam caused by a foreign object. If your coupler breaks a second time shortly after replacement, inspect the transmission for signs of wear or binding — a stiff or seized transmission will continue to break new couplers.
What is the difference between 285753 and 285753A?
The 285753A is the updated current version that superseded the original 285753. The A version incorporates metal sleeve inserts in the plastic coupling halves for improved strength and durability compared to the original all-plastic design. The 285753A replaces all previous versions — including 285753, 280152, 285743, and 285140 — and is the correct part to order regardless of which older number is listed in your washer's parts diagram.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and performance of the original 285753A motor coupler.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH01X24697 Washer Drive Belt
The XPARTCO WH01X24697 is an aftermarket replacement drive belt for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This belt connects the drive motor to the drive system, transmitting rotation to spin the basket during the wash and spin cycles.
Measures approximately 21" long, made of durable, flexible rubber engineered to reduce slipping and squeaking while withstanding regular tension and wear. Over time, the belt stretches, cracks, or breaks from age and normal use. If your washing machine is making unusual noise, not spinning correctly, or the basket isn't moving, this drive belt may be the cause. It directly replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488.
Quick Answer
The XPARTCO WH01X24697 Washer Drive Belt fixes GE, Hotpoint, Haier, Monogram, and Café top-load washers with unusual noise, a basket that won't spin correctly, or a basket that isn't moving at all. Approximately 21" long. Replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488. Not the same as the similarly-numbered WH01X24180 or WH01X27538 belts, which are separate parts used on other GE/Hotpoint models — confirm your exact part number before ordering.
Common Problems This Part Fixes
Basket not spinning or not moving at all
Unusual noise during operation, including squeaking
Basket slipping or spinning inconsistently
Wash cycle running without proper agitation or spin
Belt visibly stretched, cracked, or broken
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive belt directly replaces the following OEM and cross-reference part numbers:
WH01X24697, 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive belt is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform, including model numbers such as GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW330ASK0WW, GTW330ASK1WW, GTW330ASK2WW, GTW460AMJ1WW, GTW460AMJ3WW, GTW460AMJ4WW, GTW460ASJ1WW, GTW460ASJ3WW, GTW460ASJ4WW, GTW460ASJ5WW, GTW460ASJ6WW, GTW460ASJ7WW, HTW200ASK0WW, HTW200ASK1WW, HTW200ASK2WW, HTW240ASK0WS, HTW240ASK1WS, and HTW240ASK2WS.
Note — not the same as WH01X24180 or WH01X27538: These are separate GE/Hotpoint drive belts with their own cross-reference sets, used on different models. The similar numbering makes them easy to confuse. Always verify your exact part number before ordering. Contact our support team with your model number if you're unsure which belt your washer needs.
Key Features
Aftermarket replacement drive belt — connects the drive motor to the drive system to spin the basket
Resolves "won't spin," "unusual noise," and "basket not moving" symptoms caused by belt failure
Approximately 21" long
Durable, flexible rubber construction engineered to reduce slipping and squeaking
Direct drop-in replacement matching the original length and profile
Replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488
Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair with basic tools
Product Specifications
Part Number
WH01X24697
OEM Part Number
WH01X24697
Part Type
Washer Drive Belt
Condition
Aftermarket Replacement
Length
Approx. 21"
Material
Rubber
Function
Connects the drive motor to the drive system to spin the basket
Repair Difficulty
Easy to Moderate
Quantity
1 drive belt
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Remove the back panel of the washer using a socket wrench set, taking out the securing screws and carefully lifting the panel away. Locate the drive belt near the motor, at the bottom of the washer. Use a screwdriver to loosen the tensioner, then gently slide the old belt off the pulleys. Fit the new WH01X24697 belt around the pulleys in the same path as the old one, then re-tension it with the tensioner. Reinstall the back panel and secure its screws. Restore power and run a test cycle to confirm the basket spins smoothly with no unusual noise. Tools needed: socket wrench set, screwdriver, work gloves.
Frequently Asked Questions
My washer's basket isn't spinning. Is this the belt I need?
Yes, this is one of the most common symptoms of a failed drive belt. Since this belt is what transmits rotation from the drive motor to the basket, a stretched, cracked, or broken belt can leave the motor running while the basket doesn't spin correctly or at all.
Is this a difficult repair?
No, it's a straightforward repair for a confident DIYer with basic tools. It involves removing the back panel to access the belt near the motor, loosening the tensioner, and swapping the belt — no specialized skills required.
Is this the same as WH01X24180 or WH01X27538?
No, these are separate GE/Hotpoint drive belts with their own distinct cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old belt rather than assuming based on a close number match.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the length, material, and pulley fit of the original WH01X24697 drive belt used in compatible GE, Hotpoint, Haier, Monogram, and Café top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC47-00019A Dryer Heating Element Replaces WP35001247
The XPARTCO DC47-00019A is an aftermarket replacement universal-fit dryer heating element compatible with a wide range of electric dryers across multiple manufacturers — including Samsung, Whirlpool, Maytag, Amana, Inglis, and Kenmore. The heating element generates the heat that warms the air circulating through the dryer drum, evaporating moisture from wet clothes during each drying cycle. When the element fails, the dryer continues to tumble normally but produces no heat, leaving clothes damp at the end of a complete cycle.
This replacement element comes pre-assembled with insulators and restring already attached, allowing for fast installation. Rated 240V, 5300W, with metal and ceramic construction. Overall dimensions are approximately 17"L x 6-1/2"W x 2-1/2"H. Important: this is a heating element assembly only — you must reuse the housing/cannister from your old element when installing the new one. It directly replaces DC47-00019A, 35001247, WP35001247, WP35001247VP, TJDC47-00019A, DE0019A, ERDC47-00019A, 35001119, 2068550, 1185561, AP4045884, AP4201899, AP6008695, AH2038533, EA2038533, EAP2038533, EAP11741835, PD00001991, PD00002996, PS2038533, PS4205218, and PS11741835. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO DC47-00019A Dryer Heating Element fixes Samsung, Whirlpool, Maytag, Amana, Inglis, and Kenmore electric dryers that tumble normally but produce no heat or take much longer than usual to dry. Universal-fit element — 240V, 5300W. 17"L x 6-1/2"W x 2-1/2"H. Insulators and restring pre-attached. Must reuse the housing/cannister from the old element. Replaces DC47-00019A, 35001247, WP35001247, WP35001247VP, TJDC47-00019A, DE0019A, ERDC47-00019A, 35001119, 2068550, 1185561, AP4045884, AP4201899, AP6008695, PS2038533, PS4205218, PS11741835.
Common Problems This Part Fixes
Dryer tumbles normally but produces no heat — element coil burned through
Dryer takes significantly longer than usual to dry a load
Clothes coming out damp or only partially dried at the end of a cycle
Visible breakage in the element coil — snapped or burned-through Ni-Cr wire
Dryer trips the circuit breaker when the heat setting is selected — shorted element
Burning smell during operation — element arcing at a weak point in the coil
Multimeter continuity test on the element shows an open circuit
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers across multiple brands:
DC47-00019A, 2068550, AP4201899, ASM33630, AP2038533, DE0019A, ERDC47-00019A, PD00001991, PS4205218, TJDC47-00019A, WP35001247, 35001247, 1185561, AP6008695, AWP47390, EAP11741835, PD00002996, PS11741835, WP35001247VP.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This universal-fit heating element is compatible with select electric dryers from multiple manufacturers:
Samsung electric dryers — DV2, DV3, DV4, DV5, DVE series (DV40J3000EW, DV42H5000EW, DV42H5200EW, DV42H5600EP, DV45H7000EW, DV48H7400EW, DV50F9A7EVW, DV50F9A7EVP, DVE50M7450W, DVE50R5200W, DVE50R5400V, DV203AEW, DV206LEW, DV209AEW, DV210AEW, DV419AEU, DV448AEE, DV448AEP, DV5471AEW and many related models)
Whirlpool electric dryers (select models — see WP35001247 cross-reference)
Maytag electric dryers (MDE6700AYW, MDE6700AZW, MDG6700AWM, MDG6700AWW and related)
Amana electric dryers (NED7200TW10, YIED7200TW10 and related)
Inglis electric dryers (select models)
Kenmore / Sears electric dryers (Samsung and Whirlpool-built — select models)
Important — Reuse Existing Housing: This listing is for the heating element assembly only — the metal housing/cannister that the element sits inside is not included. You must reuse the housing from your old element. Remove the old element from its housing, then install the new DC47-00019A element into that same housing before reinstalling in the dryer. Also: this part is for electric dryers only — gas dryer models use different components. Always verify your specific model number before ordering.
Key Features
Universal-fit replacement heating element for multiple dryer manufacturers — replaces both Samsung DC47-00019A and Whirlpool/Maytag WP35001247 part numbers
Generates the heat that warms drying air — essential for the dryer to actually dry clothes
Pre-strung Ni-Cr (nickel-chromium) heating wire — high heat conductivity and resistance to warping over time
Insulators and restring already attached — ready for installation into the existing housing
Rated 240V, 5300W — correct electrical specifications for compatible electric dryers
Dimensions: 17"L x 6-1/2"W x 2-1/2"H
Metal and ceramic construction — durable for repeated heat/cool cycles
Electric dryers only — NOT compatible with gas dryer models
Important: heating element assembly only — must reuse the housing/cannister from the old element
Replaces 22+ OEM and cross-reference part numbers across Samsung, Whirlpool, Maytag, Amana, and related brands
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
XPDC47-00019A
Also Replaces (Whirlpool-side)
WP35001247, 35001247
Part Type
Dryer Heating Element Assembly (Universal Fit)
Condition
Aftermarket Replacement
Application
Electric Dryers Only (NOT gas)
Voltage
240V AC
Wattage
5300W
Terminal Connections
2 spade terminals
Dimensions
17"L x 6-1/2"W x 2-1/2"H
Material
Metal / Ceramic / Ni-Cr coil wire
Includes
Heating element assembly with insulators and restring pre-attached (housing NOT included — reuse old)
Compatible Brands
Samsung, Whirlpool, Maytag, Amana, Inglis, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Do Not Touch the Element with Bare Hands Disconnect power before beginning. Wear work gloves throughout — there are sharp sheet metal edges inside the dryer cabinet. The new heating element coil is sensitive to skin oils, which can cause premature burnout — handle the element only by the metal frame, not the coil wire. Remove the rear panel of the dryer to access the heating element housing/cannister. Take a photo of all wire connections and the orientation of the element before disconnecting anything. Disconnect the wires from the old element terminals and remove the housing from the dryer. With the housing on a workbench, remove the old element from inside the housing — note exactly how it sits and how the restring is positioned. Install the new DC47-00019A element into the same housing, following the same orientation as the old element. Do not let the Ni-Cr heating wire touch the housing during installation — this can cause arcing and immediate burnout. Reinstall the housing in the dryer, reconnect all wires snugly to the correct terminals, and reinstall the rear panel. Restore power and run a test heat cycle to confirm the dryer is heating properly. While the rear panel is open, inspect the high-limit thermostat, thermal fuse, and thermistor — if the element failed due to overheating, these may also be stressed. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
Does this really fit both Samsung AND Whirlpool dryers?
Yes — this is one of the more unusual cases in dryer parts where an aftermarket heating element has been designed to serve as a direct replacement for both the Samsung DC47-00019A and the Whirlpool/Maytag WP35001247 (35001247) elements. The two OEM elements share the same physical dimensions, electrical specifications (240V, 5300W), and terminal configuration, allowing a single aftermarket element to function correctly in both platforms. Compatible models span Samsung's DV series, Whirlpool/Maytag's affected dryers (MDE6700/MDG6700 and similar), and select Amana, Inglis, and Kenmore Whirlpool-built or Samsung-built models. Always verify your specific model number before ordering.
Why do I need to reuse the housing from the old element?
This listing is for the heating element assembly only — the metal cannister or housing that contains the element is not included. The housing is a heavy gauge metal enclosure with mounting brackets that secure it to the dryer cabinet, along with airflow ducting that directs air across the heating coil. Reusing the housing keeps the cost down and is standard practice for this type of replacement. Carefully remove the old element from the housing, install the new element in its place, and then reinstall the housing in the dryer. If your housing is damaged or burned through, it will need to be replaced separately.
How do I know if the heating element has failed?
The clearest sign is a dryer that tumbles and runs through a complete cycle normally but produces little or no heat, leaving clothes damp at the end. You may also notice the dryer taking much longer than usual to dry a load as it tries to compensate. Visually inspecting the element after removing the rear panel can reveal burn marks, breaks in the coil, or visible arcing damage. A multimeter continuity test on the disconnected element will also confirm failure — a working element shows continuity, while a failed element reads an open circuit (no continuity).
Should I replace the thermal fuse and thermostats at the same time?
It's a good idea to inspect them. When a heating element fails — especially if it failed due to overheating rather than simple end-of-life wear — the paired thermal fuse, high-limit thermostat, and thermistor located in the same area can also be stressed by the heat event. Since the rear panel must already be open to replace the element, checking these components' continuity with a multimeter is a quick step that can prevent a repeat repair if any of them are also on the verge of failing.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung or Whirlpool OEM part, but is manufactured to match the electrical specifications (240V, 5300W), dimensions, and Ni-Cr coil construction of the original DC47-00019A and WP35001247 heating elements that it replaces.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO Washer Replacement Part
XPARTCO 5220FR2075V Washer Water Valve Replaces 5221ER1003M
Three-solenoid, DC12V water inlet valve assembly for select LG-built front-load washing machines.
Product Overview
The XPARTCO 5220FR2075V Washer Water Inlet Valve controls the flow of water entering compatible front-load washing machines. When energized by the washer control, the valve opens the required water path and directs water through the dispenser and into the tub.
This is a new XPARTCO aftermarket replacement part designed to replace compatible LG inlet valve assemblies, including part number 5221ER1003M.
Quick Answer
XPARTCO 5220FR2075V is a three-solenoid, DC12V washer water inlet valve for select LG and LG-built Kenmore front-load washers. It replaces 5221ER1003M. Verify the complete washer model number, valve configuration, electrical connectors, and hose outlets before ordering.
Common Problems This Part May Fix
Washer does not fill with water
Slow or restricted water filling
Water continues entering after the washer is turned off
Leaking from the inlet-valve area
Incorrect water flow through the dispenser
IE or another water-inlet-related error
One or more valve solenoids do not open
Replaces and Cross-References
5220FR2075V, ALG312873, AP7003066, PD00074485, PS16544738, 5221ER1003M, AP6334246, 4869495, ALG51888, EAP12579227, PD00050119, PS12579227
Cross-reference numbers help identify the compatible component. XPARTCO is an aftermarket replacement brand and is not manufactured by LG.
Compatibility
Designed for select LG and LG-built Kenmore front-load washers that specify 5220FR2075V, 5221ER1003M, or an approved equivalent. Compatible model examples associated with this valve family.
Important: This is only a partial compatibility list. LG water valves can look nearly identical while using different voltages, solenoid counts, mounting tabs, connectors, or outlet arrangements. Confirm the full washer model and original valve number before purchase.
Key Features
High-quality XPARTCO aftermarket replacement
Replaces LG valve number 5221ER1003M
DC12V, Three-solenoid inlet valve design
Controls water entering the washer
Directs water through the dispenser system
Threaded inlet connection for the supply hose
Designed for select LG-built front-load washers
Product Specifications
XPARTCO Part Number
5220FR2075V
Replaces
5221ER1003M
Brand
XPARTCO
Part Type
Washer Water Inlet Valve Assembly, DC12V, 3 solenoid.
Condition
New
Part Quality
Aftermarket Replacement
Valve Configuration
Three Solenoids, DC12V
Application
Front-Load Washing Machine
Included
One Water Inlet Valve Assembly
Installation Notes
Unplug the washer and close both water-supply valves.
Disconnect the inlet hose and prepare for residual water.
Remove the washer top panel according to the appliance service procedure.
Photograph the electrical connectors and outlet-hose locations before disconnecting them.
Release the wire connectors, hose clamps, and mounting screws from the original valve.
Install the replacement valve in the same orientation and reconnect every hose and wire.
Open the water supplies slowly, check for leaks, restore power, and test the washer.
Diagnostic tip: Confirm that the household water valves are open, inlet hoses are not kinked, and the inlet screens are not clogged before replacing the valve.
Frequently Asked Questions
Is XPARTCO 5220FR2075V a Genuine OEM LG part?
No. It is an XPARTCO aftermarket replacement designed for compatible LG-built washers.
What does the water inlet valve do?
It opens and closes electrically to control water entering the washer and directs water through the dispenser system.
Does this valve replace 5221ER1003M?
Yes, this XPARTCO valve is sold as a replacement for 5221ER1003M on compatible washer models.
Can a bad inlet valve cause an IE error?
Yes. A failed solenoid, restricted valve, clogged inlet screen, or water-supply problem can cause slow filling or an inlet-related error.
Will this fit every LG washer?
No. Confirm the complete model number and compare the original valve number, connectors, mounting points, and hose outlets before ordering.
Shop With Confidence
Verify your washer model and original valve number before ordering. Our compatibility support team can help determine whether XPARTCO 5220FR2075V is correct for your appliance.
XPARTCO Replacement PartFast U.S. ShippingCompatibility SupportSecure Checkout
XPARTCO W10528947 Washer Drive Hub Kit
The XPARTCO W10528947 is an aftermarket replacement washer basket drive hub kit compatible with select top-load washing machines from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. The drive hub is a critical transmission component that connects the spin basket to the spin shaft, transferring power from the motor to rotate the wash basket and agitate laundry during each cycle.
This kit includes one basket drive hub and one drive block retainer — everything needed to restore proper spinning and agitation function. Common causes of drive hub failure include normal wear over time, strain from heavy or unbalanced loads, and physical damage from impact. A worn or cracked hub typically results in the basket slipping, failing to spin, or producing loud clicking and grinding noises during operation.
Quick Answer
The XPARTCO W10528947 Washer Drive Hub Kit fixes washers that won't spin, spin weakly, make clicking or grinding noises, or leave clothes too wet after the cycle. It connects the spin basket to the spin shaft and is compatible with select Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis top-load washers.
Common Problems This Part Fixes
Washer not spinning or agitating at all
Weak or slow spin — clothes coming out too wet
Clicking, grinding, or loud noises during spin cycle
Basket slipping under load
Washer pumping but not spinning
Excessive shaking or movement during operation
Replaces Part Numbers
This kit directly replaces the following OEM and cross-reference part numbers:
W10528947, 2684908, W10396887, W10528947VP, W11771931, EAP6012095, AWP40580, PD00024946, AP5665171, PS6012095.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive hub kit is compatible with select top-load washers from the following brands:
Whirlpool top-load washers
Maytag top-load washers (including Bravos series)
Kenmore top-load washers (select models)
Amana top-load washers
Admiral top-load washers
Crosley top-load washers
Inglis top-load washers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Connects the spin basket to the spin shaft — restoring proper agitation and spin performance
Aftermarket replacement built to OEM-equivalent quality standards
Kit includes one basket drive hub and one drive block retainer for a complete repair
Made from durable plastic construction designed to withstand regular wash cycle stress
DIY-friendly repair — installs with basic hand tools in 30–60 minutes
Budget-friendly alternative to OEM at a lower cost without sacrificing performance
Product Specifications
Part Number
W10528947
Part Type
Washer Basket Drive Hub Kit
Condition
Aftermarket Replacement
Application
Top-Load Washing Machine
Material
Durable Plastic (ABS)
Hub Dimensions
3-5/8" Diameter x 13/16" H
Retainer Clip Length
2-7/8"
Kit Includes
1 Basket Drive Hub + 1 Drive Block Retainer
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, Inglis
Installation Notes
⚠️ Safety First — Disconnect Power and Water Before Starting Unplug the washer from the power source and shut off the hot and cold water supply valves before beginning any repair. Remove the agitator or impeller (depending on your model) to access the drive hub. Unscrew the old hub and retainer, install the new drive hub kit in the same position, and reassemble the washer. Tools needed: multi-bit screwdriver, 7/16-inch socket with extension, and a nut driver. Allow 30–60 minutes for a complete repair. Consult your washer's service manual for model-specific instructions.
Frequently Asked Questions
Will the W10528947 fit my washer?
This kit is compatible with select top-load washers from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. Always verify your washer's model number before ordering. Contact our support team if you need help confirming compatibility.
What does the drive hub do?
The drive hub connects the spin basket to the spin shaft beneath the agitator. It transfers power from the motor to rotate the wash basket during the spin and agitation cycles. When the hub wears out or cracks, the basket can slip or stop spinning entirely.
What are the signs that my drive hub needs replacement?
Common signs include: the washer won't spin or agitate, the spin cycle is weak or slow, clothes come out too wet, or you hear clicking and grinding noises during operation. Excessive shaking or movement during the cycle can also indicate a worn hub.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is designed to deliver reliable, long-lasting performance at a more affordable price point.
What is included in the kit?
The kit includes one basket drive hub and one drive block retainer — the two components needed for a complete drive hub replacement.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. Our team is available to help you verify compatibility before you buy.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH01X27538 Washer Drive Belt
The Genuine OEM GE WH01X27538 is a washer drive belt for GE and Hotpoint top-load washers. It is a 5-rib belt with 4 grooves, approximately 22.87 inches long. The belt connects the drive motor to the transmission pulley, so the motor can spin the basket and agitate the clothes. A worn, stretched, or broken belt can cause a washer that won't spin or agitate, a slow spin, squealing, or noise during the cycle.
This is the original GE part. Belts differ between washer families, so check the part number against your model before ordering.
Quick Answer
The Genuine OEM WH01X27538 Drive Belt fixes a GE or Hotpoint top-load washer that won't spin or agitate, spins slowly, or squeals or makes noise because the drive belt is worn or broken. Classic symptom: the motor runs, but the basket or agitator doesn't turn.
Common Problems This Part Fixes
Motor runs but the basket or agitator doesn't turn
Washer won't spin or agitate
Slow spin or poor wash performance
Squealing or noise during the cycle
Visibly worn, cracked, stretched, or broken belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drive belt directly replaces the following part number:
WH01X27538, replaces 290D1101P005, 4587903, 5PJ 586 SJ 161, AGE25699, AP6328256, OEM18984777, PD00043350, PS12299369
Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This drive belt is listed for GE and Hotpoint top-load washers, including these examples:
GE GTW220ACK4WW, GTW220ACK5WW, GTW330ASK4WW, GTW335ASN1WW
GE GTW460ASJ8WW, GTW460ASJ9WW, GTW460ASJAWW
Hotpoint HTW200ASK3WW, HTW240ASK5WS, HTW240ASK6WS
Note: The models above are a small sample, not a full list. Washer belts differ between families, so compare your old belt to this one (approximately 22.87 inches, 5 ribs) and check your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE drive belt for GE and Hotpoint top-load washers
5-rib, 4-groove design, approximately 22.87 inches long
Connects the drive motor to the transmission pulley
Resolves no-spin, no-agitate, and noise problems caused by a worn belt
Typically a 30 minute to 1 hour repair
Product Specifications
Part Number
WH01X27538
OEM Part Number
WH01X27538
Part Type
Washer Drive Belt
Condition
Genuine OEM
Belt Length
Approx. 22.87 Inches
Belt Profile
5-Rib, 4-Groove
Application
GE & Hotpoint Top-Load Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before beginning, and wear work gloves to protect your hands. Access to the belt depends on your model, so follow its service guide to reach the motor and pulleys. Note how the old belt is routed, remove it, and fit the new belt on the same pulleys. Check that it is seated in the pulley grooves before reassembling.
Frequently Asked Questions
My washer motor runs but the basket won't turn. Is this the part I need?
A broken or slipping drive belt is a common cause. If the belt looks worn, cracked, or loose, replacing it is a good first step.
How long is this belt?
It is approximately 22.87 inches long, with 5 ribs and 4 grooves. If your old belt is a very different length or has a different number of ribs, check your model number before ordering.
Is this a top-load or front-load part?
It is listed for GE and Hotpoint top-load washers. If you are unsure which belt your washer uses, check your model number or contact our support team.
Is this an easy repair?
Retailers list it at roughly 30 minutes to 1 hour, though it depends on your model. Follow your model's service guide to reach the motor and pulleys.
Will this fit my washer?
It is listed for many GE and Hotpoint washers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
5220FR2075LCM Washer Water Valve
Three solenoid valve for cold water.
Fits LG front load washers.
Replaces Part Numbers: 5221ER1003A, 1268130, 5221ER1003C, 5221ER1003D, 5221ER1003F, AH3527452, EA3527452, AP4442608, PS3527452. 5220FR2075L, 4322702, AGM73269503, AP5986564, PS11728995.
Description: This Water Inlet Valve Assembly is a replacement part for specific Kenmore, LG washing machine models. This critical component regulates the flow of water into the washing machine tub, ensuring the proper water supply for various wash cycles and functions.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WH23X27419 Washer Drain Pump – Compatible with GE, Haier & Hotpoint Washers
Product Description
Restore proper water drainage and reliable washer performance with the XPARTCO WH23X27419 Washer Drain Pump. This high-quality aftermarket replacement pump is designed to efficiently remove water from the washer during drain and spin cycles. A worn or failing drain pump can cause standing water, slow draining, loud humming or grinding noises, or cycle interruptions. Replacing it with this dependable XPARTCO pump helps ensure smooth operation and prevents water-related issues.
XPARTCO offers cost-effective aftermarket appliance parts built to OEM-equivalent fit and performance standards.
Replaces Part Numbers
WH23X27419, WD-5470-09, 4588221, PD00053097, EAP12343437, AP6328341, PS12343437.
Compatibility
This replacement washer drain pump fits select GE, Haier and Hotpoint top-load washers.
Example compatible models include (but are not limited to):
GE GTW465ASNWW, GTW485ASJWS
Hotpoint HTW240ASKWS
Haier HLP22P: 11LBS DOUBLE DRIVE FUZZ, Haier RWT150AW, RWT150AW, Haier RWT350AW 3.1 CUBIC FEET TOP LOAD AGITATOR WASHER, WHITE Haier XQB5010A, Haier GWT460AW GWT460AW: AMERICA/HAIER/10KG Haier XQB6091AF XQB60-91AF:PORTABLE WASHER-13. Haier XQB6091BF XQB60-91BF:13.2 LB HAND WASH W Haier RWT360BW 3.0 CU. FT. CAPACITY TOP-LOAD WASHER Haier GWT460BW 3.2 CU. FT. CAPACITY HIGH-EFFICIENCY WASHER Haier BRW2, PCX-30L V12624 GWT450AW GWT450AW
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and pumping performance
💧 Efficient Water Removal – Restores proper draining during cycles
🔇 Quiet, Smooth Operation – Helps eliminate pump noise issues
💪 Durable Motor & Housing – Built for long-term reliability
💰 Cost-Effective Repair – Affordable alternative to OEM drain pumps
📐 Product Specification
Part Number: WH23X27419
Component Type: Washer Drain Pump
Voltage: 120V AC
Mounting: Direct-fit, bolt-on installation
Application: Washer drain and spin system
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.
Basic Steps:
Disconnect washer power and water supply.
Access the drain pump from the bottom or rear of the washer.
Remove hoses and electrical connectors.
Remove mounting screws and take out the old pump.
Install the new XPARTCO WH23X27419 drain pump.
Reconnect hoses and wiring, reassemble panels, and restore power.
Run a test cycle to confirm proper draining.
⏱️ Time Required: 25–35 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore proper washer draining and prevent water buildup — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO DC97-19289F Washer Drain Pump Assembly
The XPARTCO DC97-19289F is an aftermarket replacement washer drain pump assembly compatible with a wide range of Samsung top-load washers in the WA40, WA41, WA42, WA44, WA45, WA48, WA50, WA52, and WA54 series, as well as select Kenmore models built on the Samsung platform. The drain pump removes water from the washer tub during the drain portion of each wash cycle. When the pump fails, the washer will display error codes 5C, SE, nd, 5E, FO2, or E5, leave standing water in the tub, stop mid-cycle, or produce unusual noise during draining.
This complete drain pump assembly is rated 120V, 60Hz, 80W, 1.1A with a 30-minute on / 30-minute off duty cycle. It directly replaces DC97-19289A, DC97-19289B, DC97-17349B, DC97-17366A, DC97-17366J, and PX3516-01. Note: the wire plug on the new pump may differ slightly from the original — if the connector does not match your washer's harness, transfer the wiring harness from the old pump to the new one. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO DC97-19289F Washer Drain Pump Assembly fixes Samsung top-load washers displaying error codes 5C, SE, nd, 5E, FO2, or E5, not draining, leaving standing water, or making loud noise during the drain cycle. 120V/60Hz/80W/1.1A, 30 min on/30 min off duty cycle. Compatible with Samsung WA40 through WA54 series and Kenmore (Samsung-built). Replaces DC97-19289A, DC97-19289B, DC97-17349B, DC97-17366A, DC97-17366J, PX3516-01. Note: if wire plug differs, transfer harness from old pump.
Common Problems This Part Fixes
Error codes 5C, SE, nd, 5E, FO2, or E5 — washer cannot drain within the allotted time
Washer not draining — standing water remaining in the tub after a cycle
Washer stopping mid-cycle due to a drain fault
Loud humming, grinding, or rattling noise during the drain cycle
Water draining very slowly — worn pump motor below rated performance
Water leaking from the drain pump area at the bottom of the washer
Pump running continuously but water not being expelled from the tub
Replaces Part Numbers
This drain pump directly replaces the following OEM and cross-reference part numbers:
DC97-19289F, DC97-17349B, DC97-19289B,DC97-17366A, DC97-17366J, DC97-19289A,ASM772133, AP6806651, EAP12592631, PD00049911, PX3516-01, PS12592631.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump is compatible with select top-load washers from the following brands and series:
Samsung top-load washers — WA40 series (WA400PJHDWR and related models)
Samsung top-load washers — WA41 series (WA41A3000AW and related models)
Samsung top-load washers — WA42 series
Samsung top-load washers — WA44 series (WA44A3205AW and related models)
Samsung top-load washers — WA45 series (WA45H7000AW, WA45M7050AW, WA45N3050AW, WA45T3200AW and related models)
Samsung top-load washers — WA48 series (WA48H7400AW and related models)
Samsung top-load washers — WA50 series (WA50F9A7DSP, WA50M7450AW and related models)
Samsung top-load washers — WA52 series (WA52M7750AW, WA52M8650AW and related models)
Samsung top-load washers — WA54 series (WA54M8750AV and related models)
Samsung top-load washers — WA456DRHDSU series
Kenmore / Sears top-load washers (select Samsung-built models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Removes water from the tub during the drain and spin cycles for proper washer operation
Resolves Samsung error codes 5C, SE, nd, 5E, FO2, and E5 caused by drain pump failure
Rated 120V, 60Hz, 80W, 1.1A — correct electrical specifications for compatible Samsung top-load models
30-minute on / 30-minute off duty cycle — matches the operational requirements of compatible models
Replaces DC97-19289A, DC97-19289B, DC97-17349B, DC97-17366A, DC97-17366J, and PX3516-01
Wire plug may differ from original — transfer harness from old pump if connector does not match
Compatible with Samsung WA40 through WA54 series and Kenmore Samsung-built top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
DC97-19289F
Also Replaces
DC97-19289A, DC97-19289B (prior versions)
Part Type
Washer Drain Pump Assembly
Condition
Aftermarket Replacement
Application
Samsung Top-Load Washers
Voltage
120V AC
Frequency
60 Hz
Wattage
80W
Amperage
1.1A
Duty Cycle
30 minutes on / 30 minutes off
Error Codes Resolved
5C, SE, nd, 5E, FO2, E5
Connector Note
Wire plug may differ — transfer harness from old pump if needed
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Tilt the washer back or lay it on its side to access the drain pump at the bottom of the machine. Place towels and a shallow pan to catch residual water when the pump is disconnected. Note the wiring connector orientation before disconnecting — take a photo if needed. If the new pump's connector does not match the washer's harness, carefully transfer the wiring harness from the old pump to the new pump. Disconnect the drain hoses from the pump using pliers to loosen the clamps. Unscrew the pump mounting screws and remove the old pump. Install the new DC97-19289F pump in the same position, reconnect drain hoses and secure with clamps, and reconnect the wiring harness. Restore water supply and power, then run a drain cycle to verify proper drainage and check for leaks. Tools needed: Phillips screwdriver, pliers, shallow pan, towels.
Frequently Asked Questions
What error codes indicate a drain pump failure on Samsung washers?
Error codes 5C, SE, nd, 5E, FO2, and E5 on Samsung top-load washers all indicate a drain fault — the washer was unable to drain within the expected time. These codes can also be caused by a clogged drain filter, blocked hose, or kinked drain line, so check those first. If the filter and hose are clear and the error persists after clearing them, the drain pump is the most likely cause.
What is the difference between DC97-19289F, DC97-19289A, and DC97-19289B?
These are successive revisions of the same Samsung drain pump assembly. DC97-19289A was the original version, DC97-19289B was an update, and DC97-19289F is the current version. Samsung issues revised part numbers when minor production changes are made — all three perform the same function and the DC97-19289F is the correct current replacement for any of the earlier versions. The DC97-17349B, DC97-17366A, and DC97-17366J are additional older cross-references for this pump used on earlier Samsung top-load models.
Why might the wire plug on the new pump differ from the original?
Samsung revised the wiring connector on this drain pump across different production runs. If the DC97-19289F pump you receive has a different connector than your washer's harness, do not force the connection. Instead, carefully remove the wiring harness from the old pump and transfer it to the new pump — both versions use the same internal terminals and the harness swap is straightforward. This is a known and documented step for this part and does not affect performance or safety.
Should I check the drain filter before replacing the pump?
Yes — always check and clean the drain filter and inspect the drain hose for kinks or blockages before replacing the pump. A clogged filter or blocked hose can cause the same error codes as a failed pump and clearing the blockage may resolve the problem without needing a new part. On Samsung top-load washers the drain filter is typically located at the bottom front of the machine. If the filter and hose are clear and the error persists, the pump needs replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications and performance of the original DC97-19289F drain pump assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
