ERP WD12X10277 Dishwasher Lower Dish rack Roller Axle
Single Pack
Gray Color
Replaces Part Number: WD12X10277, WD12X10075, WD12X10101, WD12X10126, WD12X10261
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DC66-00887A Washer Pulsator Cap – Compatible with Samsung Washers
Product Description
Replace your worn or missing washer pulsator cap with the XPARTCO DC66-00887A Washer Pulsator Cap. This high-quality aftermarket replacement protects the central bolt of the pulsator (wash plate) from water intrusion and corrosion. A damaged or missing cap can lead to imbalance, leaks, or noise during spin cycles. Installing this part restores proper drum function and extends the washer’s lifespan.
Replaces Part Numbers
DC66-00887A, PD00038471, EAP11762121, AP6027557, 4814077, PS11762121.
Compatibility
This replacement pulsator cap fits select Samsung top-load washers.
Example compatible models include (but are not limited to):Samsung WA45H7000AW/A2, WA400PJHDWR/AA, WA422PRHDWR/AA
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Compatible with Samsung top-load washers
💧 Protective Design – Prevents water from reaching the pulsator bolt
💰 Budget-Friendly Fix – Quality replacement at a lower cost than OEM
🛠️ Simple Installation – Snaps securely into place in seconds
🛡️ Fixes Common Issues – Resolves missing, cracked, or leaking pulsator caps
📐 Product Specification
Part Number: DC66-00887A
Component Type: Washer Pulsator (Wash Plate) Cap
Material: Durable, water-resistant plastic
Mounting: Snap-fit installation, tool-free
Operating Conditions: Designed for residential top-load washers
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Always unplug the washer before performing repairs.
Steps:
Unplug washer and open lid.
Remove any debris around the pulsator area.
Gently pry off the old cap using a flathead screwdriver if needed.
Align and press the new XPARTCO DC66-00887A cap firmly until it clicks.
Confirm a tight seal before restarting the washer.
⏱️ Time Required: 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore your washer’s performance — Add to Cart Now for a reliable, affordable replacement!
WD15X26078 Genuine OEM GE Dishwasher Water Inlet Valve
The WD15X26078 is a Genuine OEM GE replacement dishwasher water inlet valve compatible with a wide range of GE, GE Profile, Café, Haier, Hotpoint, RCA, and Kenmore GE-built dishwashers. The water inlet valve is mounted at the base of the dishwasher behind the lower access panel, connecting the household water supply line to the dishwasher's fill circuit. When the control board calls for water during the fill phase, the valve's internal solenoid opens, allowing water to flow into the tub — and it closes the instant the call is dropped, stopping flow precisely at the correct fill level. Without a properly functioning inlet valve, the dishwasher can't fill correctly — leading to poor cleaning performance, error codes, or no wash at all.
Rated 120V, 60Hz. Approximate dimensions: 3.75" H x 3.25" W x 3.00" L. Silver/multi-color metal and plastic construction with a deep-threaded, high-quality water inlet for a tight supply-line connection and a secure outlet design that keeps the internal fill hose firmly attached. As a Genuine OEM part manufactured by GE to factory specifications, the WD15X26078 directly replaces 4959029, AP6986683, PS16217027, EAP16217027, and PD00064270. Hard water sediment is a leading cause of inlet valve clogging and failure on GE dishwashers — if your old valve is restricted by mineral buildup, replacement (not cleaning) is the recommended fix, as the internal components are easily damaged during cleaning attempts. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The WD15X26078 Genuine OEM GE Dishwasher Water Inlet Valve fixes GE, GE Profile, Café, Haier, Hotpoint, and Kenmore dishwashers that aren't filling with water, fill slowly, display the H2O error code, make strange noises or vibration during fill, won't stop filling, or leak from the valve area. 120V, 60Hz. Approx 3.75"H x 3.25"W x 3.00"L. Genuine OEM GE. Replaces 4959029, AP6986683, PS16217027, EAP16217027, PD00064270. Compatible with GDF, GDT, GDP, PDT, PDP, QDP, ZDT, DDT, and Café CDT series dishwashers.
Common Problems This Part Fixes
Dishwasher not filling with water at all — valve solenoid not opening
Dishwasher filling slowly or not getting enough water — valve clogged with hard water sediment
H2O error code displayed — insufficient water intake detected
Strange noises or vibration during the fill phase — worn valve diaphragm
Dishwasher won't stop filling — valve stuck open (overfill/flood risk)
Water leaking from the valve area or its connections
Dishes not being cleaned properly due to insufficient water fill
Wash cycle interrupted or extended due to fill timeouts
Valve inlet screen visibly clogged with mineral deposits
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher water inlet valve directly replaces the following OEM and cross-reference part numbers:
WD15X26078, AGE846049, AP6986683, EAP16217027, PD00064270, PS16217027
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: some similar-looking GE valves (such as WD15X24213 or WD15X26140) are different parts — verify your original valve's part number or your dishwasher model number before ordering.
Compatibility
This water inlet valve is compatible with select dishwashers from the following brands:
GE dishwashers — GDF series (GDF510PGM4BB/WW, GDF510PSM4SS/5SS, GDF511PSM5SS, GDF511PGM5WW, GDF530PGM4BB/CC/WW/5WW, GDF530PSM4SS/5SS, GDF530PMM4ES, GDF565SSN3SS, GDF630PFM4DS/5DS, GDF630PGM4BB/WW/5BB, GDF630PMM4ES/5ES, GDF630PSM4SS, GDF640HFM4DS, GDF640HGM4WW/5BB, GDF640HMM4ES, GDF645SGN2BB/WW/3BB/3WW, GDF645SMN2ES/3ES, GDF645SSN2SS/3SS and related)
GE dishwashers — GDT series (GDT530PGP5BB, GDT530PSP5SS, GDT535PSMASS, GDT535PSM5SS, GDT565SSN2SS, GDT605PSM5SS, GDT630PFM4DS, GDT630PMM4ES/5ES, GDT630PYM4FS, GDT635HMM4ES, GDT635HSM4SS/5SS, GDT645SGN2BB/WW/3WW, GDT645SMN3ES, GDT645SSN2SS, GDT645SYN2FS, GDT665SBN2TS/3TS, GDT665SFN3DS, GDT665SGN2WW/3WW, GDT665SMN2ES, GDT665SSN3SS and related)
GE dishwashers — GDP series (GDP615HFM4DS, GDP645SYN3FS/4FS/8FS, GDP665SYN2FS/3FS/4FS/8F7S and related)
GE Profile dishwashers — PDT series (PDT715SBN2TS/3TS, PDT715SFN3DS, PDT715SMN2ES/3ES, PDT715SYN3FS, PDT775SYN2FS/3FS, PDT785SBN2TS, PDT785SYN2FS/3FS/5FS and related)
GE Profile dishwashers — PDP series (PDP715SBN3TS, PDP715SYN3FS and related)
GE dishwashers — QDP series (QDP555SBN4TS, QDP555SYN4FS and related)
GE Monogram dishwashers — ZDT series (ZDT925SIN2II/3II/5II, ZDT925SPN2SS/3SS, ZDT925SSN2SS/3SS/5SS, ZDT985SIN3II, ZDT985SPN5SS, ZDT985SSN5SS and related)
GE dishwashers — DDT series (DDT700SBN2TS/3TS, DDT700SFN2DS/3DS, DDT700SGN2BB/WW, DDT700SMN2ES and related)
Café dishwashers — CDT series (CDT800P2N2S1-N5S1, CDT805M5N2S5-N4S5, CDT805P2N2S1-N5S1, CDT845M5N2S5-N5S5, CDT845P2N2S1-N5S1, CDT845P3N2D1-N5D1, CDT845P4N2W2-N5W2, CDT855M5N2S5/N3S5/N5S5, CDT855P2N2S1/N3S1/N5S1, CDT875M5N2S5-N7S5, CDT875P2N2S1-N5S1, CDT875P3N5D1 and related)
Haier dishwashers (select models using the GE-platform valve)
Hotpoint and RCA dishwashers (select GE-built models)
Kenmore / Sears dishwashers (select GE-built models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance
Controls the flow of water into the dishwasher during fill cycles — precise fill for optimal cleaning performance
Solenoid-actuated — opens when the control board calls for water and closes the moment the call is dropped
Rated 120V, 60Hz — correct electrical specifications for compatible GE-platform dishwashers
Approximate dimensions: 3.75" H x 3.25" W x 3.00" L
Deep-threaded water inlet for a tight, leak-free supply line connection
Secure outlet design keeps the internal fill hose firmly attached
Resolves H2O error codes, no-fill, slow-fill, overfill, and fill-noise symptoms
Replaces 4959029, AP6986683, PS16217027, EAP16217027, and PD00064270
Compatible with GE GDF/GDT/GDP series, GE Profile PDT/PDP series, QDP series, Monogram ZDT series, DDT series, Café CDT series, plus Haier, Hotpoint, RCA, and Kenmore GE-built dishwashers
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
WD15X26078
Part Type
Dishwasher Water Inlet Valve Assembly
Condition
Genuine OEM
Application
Dishwashers (GE platform)
Voltage
120V AC
Frequency
60 Hz
Dimensions
Approximately 3.75" H x 3.25" W x 3.00" L
Color
Silver / Multiple Colors
Material
Metal / Plastic
Error Codes Resolved
H2O (insufficient water intake)
Compatible Brands
GE, GE Profile, Café, Monogram, Haier, Hotpoint, RCA, Kenmore
Installation Notes
⚠️ Unplug Dishwasher and Shut Off Water Supply Before Starting — Wear Work Gloves Disconnect power at the breaker and shut off the household water supply at the shutoff valve under the sink before beginning. Wear work gloves to protect your hands. Have towels and a shallow dish ready — residual water remains in the supply line and hoses and will spill when disconnected. Remove the lower access panel (baffle) at the front bottom of the dishwasher — typically 2–4 screws. Locate the water inlet valve where the household supply line enters the dishwasher. Photograph the hose and wire connections before disconnecting anything. Disconnect the household water supply line from the valve inlet (use pliers for the larger ingress connection — place the dish underneath to catch leftover water). Disconnect the internal fill hose from the valve outlet (needle-nose pliers help with the smaller egress hose clamp). Unplug the electrical connector that snaps onto the valve solenoid. Remove the mounting screws holding the valve bracket to the frame and lift the old valve out. Install the new WD15X26078 valve in the same position, secure the mounting screws, reconnect the internal fill hose with its clamp, and snap the electrical connector back on. Reconnect the household water supply line to the valve inlet — align the threads carefully and tighten snugly without over-torquing. Turn the water supply back on and use a flashlight to inspect all connections for leaks BEFORE reinstalling the access panel. Restore power and run a test cycle to confirm proper filling with no leaks. Tools needed: Phillips screwdriver, pliers, needle-nose pliers, shallow dish, towels, flashlight, work gloves.
Frequently Asked Questions
What does the H2O error code mean on my GE dishwasher?
The H2O error code on GE dishwashers indicates the control board is not detecting sufficient water intake during the fill phase. Common causes are: a failed or clogged water inlet valve (the most frequent culprit), the household water supply shutoff valve partially closed, a kinked supply line, or low household water pressure. First verify the supply valve under the sink is fully open and the line isn't kinked. If the supply checks out, the WD15X26078 inlet valve is the standard fix — hard water sediment gradually clogs the valve's internal screen and passages, restricting flow until the dishwasher can't fill within its expected time window.
Can I clean the old valve instead of replacing it?
It's not recommended. While the inlet screen on some valves can be carefully brushed clean, the internal passages and solenoid diaphragm of a sediment-clogged valve are easily damaged during cleaning attempts — a common outcome is a valve that leaks or sticks open after being "cleaned," which risks flooding. Real-world experience (including customer stories with this exact part) shows that attempting to clean a hard-water-clogged valve often breaks it. Given the moderate cost of the OEM replacement versus the flood risk of a compromised valve, replacement is the reliable repair. If your area has hard water, consider this a maintenance item that may need periodic replacement.
My dishwasher won't stop filling — is that also this valve?
Yes — a valve stuck in the open position is the other failure mode. When sediment or a worn diaphragm prevents the valve from sealing fully closed, water continues to flow into the tub even when the control board has cut power to the solenoid. This can lead to overfilling and potentially flooding through the door or float overflow. If your dishwasher keeps filling past its normal level, or you find water accumulating in the tub between cycles, shut off the water supply at the sink immediately and replace the valve before running the dishwasher again.
How do I know this is the right valve for my GE dishwasher?
Check your dishwasher's model number (on a label along the door frame or tub edge) against the compatibility list above — the WD15X26078 covers a broad range of GE GDF, GDT, GDP, Profile PDT/PDP, QDP, Monogram ZDT, DDT, and Café CDT series dishwashers. Be aware that some similar-looking GE valves (such as WD15X24213 or WD15X26140) are different parts used on other model groups — they are not interchangeable with the WD15X26078. If your model isn't in the list or your original valve shows a different part number, contact our support team with your model number and we'll verify the correct valve before you order.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same water inlet valve installed in compatible GE, GE Profile, Café, Monogram, Haier, Hotpoint, RCA, and Kenmore GE-built dishwashers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
🚰 DD82-01588A Dishwasher Water Inlet Valve – Genuine OEM Samsung Part
🔁 Replaces These Part Numbers
DD82-01588A (primary OEM)
Also Replaces PS12593084, AP6807545, DD81-02265A, AP6244375, PS12085633.
Description: This Dishwasher Water Inlet Valve Assembly is essential for regulating the water flow into dishwasher, ensuring optimal cleaning performance. This replacement Genuine OEM part is engineered to provide precise water control, preventing leaks and maintaining efficient operation.
✅ Key Features
Genuine Samsung OEM part – DD82-01588A
Precision-engineered to match factory standards
Controls cold water intake with accurate timing and pressure
Easy to install using standard tools
Tested for leak-free performance
🔧 Fixes Common Symptoms
Dishwasher won’t fill or fills slowly
Error codes related to water inlet
No water intake at cycle start
Valve leaks or hums without water flow
🚚 Why Buy from Parts‑O‑Matic?
✅ Genuine OEM quality — not a knock‑off
✅ Always Fast and Free U.S. shipping
✅ Expert customer support for part fitment
✅ Trusted by DIYers and appliance professionals
🛒 Restore proper water fill and cycle reliability — order your DD82-01588A OEM water inlet valve today from Parts‑O‑Matic and enjoy speedy, free delivery.
DD62-00084A Dishwasher Genuine OEM Water Valve
Description: This Water Valve is a Genuine OEM part compatible with specific Samsung dishwasher models. It is responsible for opening and closing the water supply to the dishwasher. It regulates the water pressure and ensures the proper amount of water is dispensed for each cycle. Causes of a faulty water valve can include wear and tear over time, sediment or debris buildup, electrical component failure, or damage due to high water pressure. These factors can result in issues such as inadequate water flow, leaks, or the dishwasher not filling or draining properly.
Replaces Part Numbers: DD62-00084A, AP5178218, PS4222448
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DC62-30314L Dishwasher Genuine OEM Water Valve
120V, 60Hz, single coil valve with GHT inlet.
Fits Specific Samsung Dishwashers Models.
Replaces Part Numbers: DC62-30314L, AP5582579, PS4209101.
Description: The Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This genuine OEM part ensures reliable water flow control, allowing your dishwasher to fill and drain effectively during each cycle. Designed specifically for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance.
WP3392519 Genuine OEM Whirlpool Dryer Thermal Fuse
The WP3392519 is a genuine Whirlpool OEM thermal fuse mounted on the blower housing next to the blower fan. This fuse is a one-time safety device: as long as the dryer stays within its normal operating temperature, it does nothing at all, but the instant internal temperatures climb high enough — almost always from restricted airflow — the fuse permanently opens the circuit and cuts power to the dryer. That's why a blown thermal fuse produces such a specific symptom: the dryer won't start at all, with no lights, no tumble, and no response, even though the outlet has power.
This fuse opens at approximately 196°F (91°C) and terminates in two 3/16" wire terminals for a direct plug-in fit. Unlike a resettable thermostat, this thermal fuse cannot be reset once it blows — it must be replaced. A blown thermal fuse is almost always a symptom rather than a random failure: restricted exhaust venting is the leading cause, since trapped heat is exactly what the fuse is designed to react to. A shorted heating element or a failed regulating thermostat can also cause the dryer to run hot enough to blow the fuse. It directly replaces 3392519, WP3392519VP, AP6008325, 3388651, 694511, ET401, PS11741460, EAP11741460, AH11741460, EA11741460, PD00002311, G4AP0500, and 80005.
Quick Answer
The WP3392519 Genuine OEM Whirlpool Dryer Thermal Fuse fixes Whirlpool, Maytag, Kenmore, KitchenAid, Roper, Jenn-Air, and Amana dryers that won't start at all — no lights, no tumble, no response to any button. Opens at approximately 196°F (91°C). Two 3/16" wire terminals. Replaces 3392519, WP3392519VP, AP6008325, 3388651, 694511, ET401, PS11741460, EAP11741460, AH11741460, EA11741460, PD00002311, G4AP0500, 80005. Always inspect and clean the dryer venting when replacing this fuse — a blown fuse is a symptom of restricted airflow, and installing a new fuse without fixing the vent will likely blow it again.
Common Problems This Part Fixes
Dryer won't start at all — no lights, no tumble, no response to any button
Dryer that stopped working suddenly, especially after running unusually hot
Dryer runs a short time then shuts off completely and won't restart
Repeated blown fuses on a dryer with a known venting or airflow restriction
Clothes coming out extremely hot right before the dryer stopped working
Dryer that recently smelled like burning or overheating before failing
Continuity test shows an open circuit across the old fuse
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermal fuse directly replaces the following OEM and cross-reference part numbers:
3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101, 6L4101091C, ET401, 3388651, 694511, 80005, AWP47582, PD00002311, EAP11741460, AP6008325, PS11741460
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse is compatible with select Whirlpool-built dryers across the Whirlpool family of brands, including:
Whirlpool electric and gas dryers — WED, WGD series
Maytag electric and gas dryers — MEDC, MGDC series (select Whirlpool-built models)
Kenmore dryers (select Whirlpool-built models)
KitchenAid, Jenn-Air, and Amana dryers (select models)
Roper, Estate, Inglis, and Crosley dryers (select models)
Verified model numbers include: MEDC465HW0, MGDC465HW0, WED4850HW0, WED4950HW0, WED49STBW1, WET4024HW0, WET4124HW0, WGD4850HW0, WGD4950HW0, YMEDC465HW0, YWED4850HW0, and YWET4024HW0.
Note: This fuse also fits select commercial and stacked washer/dryer combination units on the Whirlpool platform. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified opening temperature and terminal configuration
One-time safety device that cuts power if the dryer overheats
Opens at approximately 196°F (91°C)
Resolves "won't start at all," "stopped working suddenly," and "clothes came out extremely hot before it died" symptoms caused by a blown fuse
Two 3/16" wire terminal connectors for a direct plug-in electrical fit
Mounts to the blower housing next to the blower fan
Replaces 3392519, WP3392519VP, AP6008325, 3388651, 694511, ET401, PS11741460, EAP11741460, AH11741460, EA11741460, PD00002311, G4AP0500, and 80005
Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Roper, Jenn-Air, and Amana dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP3392519
Part Type
Dryer Thermal Fuse (Thermal Cut-Off)
Condition
Genuine OEM
Brand
Whirlpool
Opening Temperature
Approx. 196°F (91°C)
Location
Blower housing, next to the blower fan
Terminals
2 (3/16" wire terminals)
Resettable
No — one-time use, must be replaced once blown
Dimensions
Approx. 2" x 1/2"
Repair Difficulty
Medium — basic disassembly required
Quantity
1 thermal fuse
Compatible Brands
Whirlpool, Maytag, Kenmore, KitchenAid, Roper, Jenn-Air, Amana, Estate, Inglis, Crosley
Installation Notes
⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the blower housing where the fuse is mounted. Photograph the wiring before disconnecting the wire terminals from the old fuse. Remove the mounting screw holding the fuse in place and pull it free, disconnecting both wire terminals. Before installing the new fuse, test it for continuity with a multimeter to confirm it's good out of the box, and test the old one to confirm it's actually blown (no continuity) rather than assuming. This is the most important step: fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. A blown thermal fuse is a symptom of restricted airflow, and skipping this step means the new fuse is likely to blow again. Install the new WP3392519 in the same mounting position, reconnect both wire terminals, and secure the mounting screw. Reinstall the rear panel, restore power, and run a test cycle to confirm normal heating and shutoff behavior. Tools needed: Phillips or nut driver (model-dependent), multimeter, vent brush or vacuum attachment for cleaning ductwork, work gloves.
Frequently Asked Questions
My dryer has no power at all and the lights won't turn on. Is this the thermal fuse?
It's a strong possibility. When this thermal fuse blows, it cuts power broadly enough that the console lights and control panel can go completely dark, not just the heating function — that's a normal result of how this fuse is wired into the circuit. Before replacing it, confirm the outlet has power and the breaker hasn't tripped, then check the fuse for continuity with a multimeter. If it shows no continuity, this fuse is the correct fix, though it's also worth checking the exhaust ducting since that's the most common underlying cause.
I replaced the fuse and it blew again. What's going on?
This is a strong sign that the underlying cause — almost always restricted airflow — was never addressed. Thermal fuses don't fail from age; they blow because the dryer overheated. If a new fuse keeps blowing, thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. If airflow checks out and the fuse still blows, have the heating element and cycling thermostat checked as well, since a component stuck in the "on" position can also drive excess heat.
Can I just reset the thermal fuse instead of replacing it?
No. Unlike a cycling thermostat, this thermal fuse is a one-time safety device — once it blows, its internal circuit is permanently broken and it cannot be reset or repaired. Replacement is the only option.
My clothes came out extremely hot right before the dryer died. Is that related?
Yes, this is a classic warning sign. Clothes coming out unusually hot indicates the dryer was already running hotter than normal, which is exactly the condition that leads to a blown thermal fuse. If you noticed this before the dryer stopped working, it strongly points to a ventilation or airflow problem that should be fully addressed before running the dryer again.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original opening temperature, terminal configuration, and mounting position of the thermal fuse originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
PK136277-1 Lower Dishrack Roller and Axle Set
Single Pack
Replaces part Numbers: WD12X10136, WD12X10277
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W10131172 Dryer Drive Belt - Compatible with Whirlpool, Maytag, Kenmore
Product Description
Restore your dryer’s tumbling action with the XPARTCO W10131172 Dryer Drive Belt. This replacement drive belt is designed for select Whirlpool, Maytag, Kenmore, and other compatible dryers, providing a cost-effective alternative to the original. It connects the motor to the drum, ensuring smooth rotation during the drying cycle. This part addresses issues like the drum not spinning, unusual noises (e.g., squeaking or thumping), or the dryer stopping mid-cycle, often caused by a worn, stretched, or broken belt.
Note: Includes (1) dryer drum belt. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: WPW10131172, W10131172, 1449763, PD00003839, EAP11748749, AP6015470, PS11748749.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: 3LCED9100WQ0, 3LCED9100WQ1, 3LCED9100WQ2, 7MGGW9200MW3, 7MWGD8300SW1, 7MWGD8500SR1, WED6200SW1, WED8000DW3, WED8300SW0, MEDB880BW0
Maytag: 7MMGDB850WL0, MVWC565FW0
Kenmore: 110.6007299, 110.6093699, 110.7095299
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, and other dryers.
🔧 Specifications: Replacement 5-rib belt, rubber construction, approximately 92-3/4" long.
💪 Reliable Performance: Ensures smooth drum rotation for consistent drying.
🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves drum not spinning, squeaking noises, or mid-cycle stopping.
Product Specification
Part Number: XPW10131172
Component Type: Dryer drive belt
Material: Rubber
Dimensions: Approximately 92-3/4" L x 5/16" W, 5 ribs
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a reliable fix!
W10844024 Genuine OEM Whirlpool Dishwasher Water Inlet Valve
The W10844024 is a genuine Whirlpool OEM water inlet valve for Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers. This valve regulates the flow of water into the appliance during each fill stage of the wash cycle, opening and closing to admit the correct amount of water at the right times.
Weighing approximately 0.2 lbs, common failure causes include mineral or sediment buildup inside the valve and general electrical wear in the solenoid. A failing valve produces a clear set of symptoms: the dishwasher not filling with water at all, or a valve that's unusually noisy — starting and stopping repeatedly — during heavy wash cycles as it struggles to regulate flow correctly. It directly replaces 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996
Quick Answer
The W10844024 Genuine OEM Whirlpool Dishwasher Water Inlet Valve fixes Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers that aren't filling with water, or that are unusually noisy — starting and stopping — during heavy wash cycles. Replaces 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996. Some households need a separate hose adapter for this valve if the existing water line connector has a smaller diameter than the new valve's fitting — check before you start, or be prepared for a quick hardware store trip.
Common Problems This Part Fixes
Dishwasher not filling with water at all
Valve unusually noisy — starting and stopping repeatedly during heavy wash cycles
Cycle stalling at the fill step and never advancing to wash
Poor washing results due to insufficient water fill
Leaking near the valve connections
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher water inlet valve directly replaces the following OEM and cross-reference part numbers:
W10844024, 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select Whirlpool dishwashers, and also fits select Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers built on the Whirlpool platform, including model numbers such as KUDR25SHWH1, MDB4629AWB1, DU900PWKB0, DU900PWKQ0, and Kenmore 665.15522000, 66517662991, and 66516669991.
Note: Always verify your full model number before ordering, since similar-looking dishwasher water valves can vary between models. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified solenoid design and flow rate
Regulates water flow into the dishwasher during each fill stage of the cycle
Resolves "won't fill" and "noisy, starts and stops when filling" symptoms caused by valve failure
Factory Certified Part built to Whirlpool's engineering specifications
Direct drop-in replacement — matches the original mounting and hose connections
Replaces 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996
Compatible with Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W10844024
Part Type
Dishwasher Water Inlet Valve
Condition
Genuine OEM
Brand
Whirlpool
Weight
Approx. 0.2 lbs
Function
Regulates water flow into the dishwasher during fill
Repair Difficulty
Easy to Moderate
Quantity
1 valve
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, Amana
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Check Your Hose Connector Size First Disconnect power at the outlet or shut off the circuit breaker, and disconnect the water lines connected to the old valve before beginning. Wear work gloves. Have a shop vacuum on hand — some customers have needed to remove standing water from the bottom of the dishwasher before starting this repair. Locate the old valve and use pliers to unscrew any screws or bolts connecting it to the appliance. Clean the area where the old valve was located, removing any debris before installing the new one. Check the diameter of your existing water line connector before starting — some households have a smaller-diameter connector than this new valve's fitting requires, in which case you'll need a separate hose adapter from a hardware store to complete the connection. Take the new W10844024 and place it in the same position as the old valve, making sure it's connected correctly, and secure any screws or bolts. Reattach the water lines to the new valve and reconnect power. Double-check all connections before restoring power, then run a test cycle to confirm the dishwasher fills correctly with no leaks. Tools needed: pliers, possibly a hose adapter, shop vacuum (if needed), work gloves.
Frequently Asked Questions
My dishwasher isn't filling with water at all. Is this the right part?
Yes, this is the most direct symptom of a failed water inlet valve. Since this valve is what admits water from your household supply into the dishwasher, a solenoid failure or internal blockage can prevent any water from entering at all, stopping the wash cycle from proceeding.
Will I need any extra parts for this installation?
Possibly. A few customers have found their existing water line connector had a smaller diameter than this valve's fitting, requiring a separate hose adapter purchased locally from a hardware store to complete the connection. It's worth checking your connector size beforehand, or having a quick trip to the hardware store planned just in case.
My dishwasher makes a noisy, start-and-stop sound when filling. Is that this valve?
Yes, this is a documented symptom. One customer described their valve as "very noisy on heavy wash cycles, started and stopped when filling" before replacing it with this exact part, which resolved the issue.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water inlet valve originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WD26X23258 Dishwasher Genuine Circulation Pump
Genuine dishwasher circulation pump designed to move water through the spray arms and restore proper wash performance.
✓ Genuine Part ✓ Replaces WD26X23258 ✓ Compatibility Support
Product Description
This Pump is a Genuine component for specific GE dishwasher models. It refers to the water pump component that circulates water throughout the dishwasher during cycles. Common cause of a faulty pump can include normal wear over many uses. The continuous motor operation puts strain on internal seals and impellers. Mineral deposits from hard water can also clog pump parts over time.
Replacing a faulty circulation pump can help restore proper water movement and improve dishwasher cleaning performance.
Quick Answer
If your dishwasher is not washing properly, has weak spray pressure, or makes unusual pump noise, the WD26X23258 circulation pump may need replacement.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not cleaning dishes properly
Weak spray arm water pressure
Circulation pump noise
Water not circulating during wash cycle
Poor wash performance
Replaces part Number
WD26X23258, 4466766, WD26X22285, WD26X22518, WD26X22826, AGE25293, AP6039424, EAP11772000, PD00041691, PS11772000.
Compatibility
This part fits select GE, Hotpoint, Kenmore, and compatible dishwasher models using part number WD26X23258.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Genuine dishwasher circulation pump
Helps restore proper water circulation
Supports spray arm water pressure
Designed for compatible dishwasher models
Reliable replacement component
Product Specifications
Brand
GE
Part Type
Dishwasher Circulation Pump
Primary Part Number
WD26X23258
Compatible Appliance Type
Dishwasher
Condition
Genuine New
Installation
Disconnect power and water supply before installation. Inspect hoses and seals for leaks after installation.
Troubleshooting Guide
⚠️ Disconnect power and water supply before servicing the dishwasher.
Check spray arms for blockage before replacing the pump.
Inspect pump area for leaks or unusual noise.
Verify wiring connections are secure.
Replace the circulation pump if water circulation problems continue.
When Should You Replace This Part?
Replace the dishwasher circulation pump if the dishwasher has poor cleaning performance, weak spray pressure, unusual pump noise, or water is not circulating during the wash cycle.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Genuine Parts ✓ Compatibility Support ✓ Secure Checkout
ERP WD12X10231 Dishwasher Lower Rack Roller
Replaces Part Numbers: WD12X10231, 1263942, AH1481883, EA1481883, AP3994981, PS1481883.
Description: This Lower Dishrack Stud and Roller Assembly is a replacement part for select GE dishwasher models. It is essential for the smooth operation of the dishwasher's lower dishrack, allowing it to slide in and out. This assembly includes the roller that attaches to the dishrack and the studs that secure these rollers in place.
This is an aftermarket part that can be used as a replacement for the OEM part.
